#!/usr/bin/perl -w

# SPDX-FileCopyrightText: 2021-2024 Ole Tange, http://ole.tange.dk and Free Software and Foundation, Inc.
# SPDX-License-Identifier: GFDL-1.3-or-later
# SPDX-License-Identifier: CC-BY-SA-4.0

=head1 GNU Parallel Tutorial

This tutorial shows off much of GNU B<parallel>'s functionality. The
tutorial is meant to learn the options in and syntax of GNU
B<parallel>.  The tutorial is B<not> to show realistic examples from the
real world.

=head2 Reader's guide

If you prefer reading a book buy B<GNU Parallel 2018> at
https://www.lulu.com/shop/ole-tange/gnu-parallel-2018/paperback/product-23558902.html
or download it at: https://doi.org/10.5281/zenodo.1146014

Otherwise start by watching the intro videos for a quick introduction:
https://www.youtube.com/playlist?list=PL284C9FF2488BC6D1

Then browse through the examples (B<man parallel_examples>). That will give
you an idea of what GNU B<parallel> is capable of.

If you want to dive even deeper: spend a couple of hours walking
through the tutorial (B<man parallel_tutorial>). Your command line
will love you for it.

Finally you may want to look at the rest of the manual (B<man
parallel>) if you have special needs not already covered.

If you want to know the design decisions behind GNU B<parallel>, try:
B<man parallel_design>. This is also a good intro if you intend to
change GNU B<parallel>.



=head1 Prerequisites

To run this tutorial you must have the following:

=over 9

=item parallel >= version 20160822

Install the newest version using your package manager (recommended for
security reasons), the way described in README, or with this command:

  $ (wget -O - pi.dk/3 || lynx -source pi.dk/3 || curl pi.dk/3/ || \
     fetch -o - http://pi.dk/3 ) > install.sh
  $ sha1sum install.sh
  12345678 51621b7f 1ee103c0 0783aae4 ef9889f8
  $ md5sum install.sh
  62eada78 703b5500 241b8e50 baf62758
  $ sha512sum install.sh
  160d3159 9480cf5c a101512f 150b7ac0 206a65dc 86f2bb6b bdf1a2bc 96bc6d06
  7f8237c2 0964b67f bccf8a93 332528fa 11e5ab43 2a6226a6 ceb197ab 7f03c061
  $ bash install.sh

This will also install the newest version of the tutorial which you
can see by running this:

  man parallel_tutorial

Most of the tutorial will work on older versions, too.


=item abc-file:

The file can be generated by this command:

  parallel -k echo ::: A B C > abc-file

=item def-file:

The file can be generated by this command:

  parallel -k echo ::: D E F > def-file

=item abc0-file:

The file can be generated by this command:

  perl -e 'printf "A\0B\0C\0"' > abc0-file

=item abc_-file:

The file can be generated by this command:

  perl -e 'printf "A_B_C_"' > abc_-file

=item tsv-file.tsv

The file can be generated by this command:

  perl -e 'printf "f1\tf2\nA\tB\nC\tD\n"' > tsv-file.tsv

=item num8

The file can be generated by this command:

  perl -e 'for(1..8){print "$_\n"}' > num8

=item num128

The file can be generated by this command:

  perl -e 'for(1..128){print "$_\n"}' > num128

=item num30000

The file can be generated by this command:

  perl -e 'for(1..30000){print "$_\n"}' > num30000

=item num1000000

The file can be generated by this command:

  perl -e 'for(1..1000000){print "$_\n"}' > num1000000

=item num_%header

The file can be generated by this command:

  (echo %head1; echo %head2; \
   perl -e 'for(1..10){print "$_\n"}') > num_%header

=item fixedlen

The file can be generated by this command:

  perl -e 'print "HHHHAAABBBCCC"' > fixedlen

=item For remote running: ssh login on 2 servers with no password in
$SERVER1 and $SERVER2 must work.

  SERVER1=server.example.com
  SERVER2=server2.example.net

So you must be able to do this without entering a password:

  ssh $SERVER1 echo works
  ssh $SERVER2 echo works

It can be setup by running B<ssh-keygen -t dsa; ssh-copy-id $SERVER1>
and using an empty passphrase, or you can use B<ssh-agent>.

=back


=head1 Input sources

GNU B<parallel> reads input from input sources. These can be files, the
command line, and stdin (standard input or a pipe).

=head2 A single input source

Input can be read from the command line:

  parallel echo ::: A B C

Output (the order may be different because the jobs are run in
parallel):

  A
  B
  C

The input source can be a file:

  parallel -a abc-file echo

Output: Same as above.

STDIN (standard input) can be the input source:

  cat abc-file | parallel echo

Output: Same as above.


=head2 Multiple input sources

GNU B<parallel> can take multiple input sources given on the command
line. GNU B<parallel> then generates all combinations of the input
sources:

  parallel echo ::: A B C ::: D E F

Output (the order may be different):

  A D
  A E
  A F
  B D
  B E
  B F
  C D
  C E
  C F

The input sources can be files:

  parallel -a abc-file -a def-file echo

Output: Same as above.

STDIN (standard input) can be one of the input sources using B<->:

  cat abc-file | parallel -a - -a def-file echo

Output: Same as above.

Instead of B<-a> files can be given after B<::::>:

  cat abc-file | parallel echo :::: - def-file

Output: Same as above.

::: and :::: can be mixed:

  parallel echo ::: A B C :::: def-file

Output: Same as above.

=head3 Linking arguments from input sources

With B<--link> you can link the input sources and get one argument
from each input source:

  parallel --link echo ::: A B C ::: D E F

Output (the order may be different):

  A D
  B E
  C F

If one of the input sources is too short, its values will wrap:

  parallel --link echo ::: A B C D E ::: F G

Output (the order may be different):

  A F
  B G
  C F
  D G
  E F

For more flexible linking you can use B<:::+> and B<::::+>. They work
like B<:::> and B<::::> except they link the previous input source to
this input source.

This will link ABC to GHI:

  parallel echo :::: abc-file :::+ G H I :::: def-file

Output (the order may be different):

  A G D
  A G E
  A G F
  B H D
  B H E
  B H F
  C I D
  C I E
  C I F

This will link GHI to DEF:

  parallel echo :::: abc-file ::: G H I ::::+ def-file

Output (the order may be different):

  A G D
  A H E
  A I F
  B G D
  B H E
  B I F
  C G D
  C H E
  C I F

If one of the input sources is too short when using B<:::+> or
B<::::+>, the rest will be ignored:

  parallel echo ::: A B C D E :::+ F G

Output (the order may be different):

  A F
  B G


=head2 Changing the argument separator.

GNU B<parallel> can use other separators than B<:::> or B<::::>. This is
typically useful if B<:::> or B<::::> is used in the command to run:

  parallel --arg-sep ,, echo ,, A B C :::: def-file

Output (the order may be different):

  A D
  A E
  A F
  B D
  B E
  B F
  C D
  C E
  C F

Changing the argument file separator:

  parallel --arg-file-sep // echo ::: A B C // def-file

Output: Same as above.


=head2 Changing the argument delimiter

GNU B<parallel> will normally treat a full line as a single argument: It
uses B<\n> as argument delimiter. This can be changed with B<-d>:

  parallel -d _ echo :::: abc_-file

Output (the order may be different):

  A
  B
  C

NUL can be given as B<\0>:

  parallel -d '\0' echo :::: abc0-file

Output: Same as above.

A shorthand for B<-d '\0'> is B<-0> (this will often be used to read files
from B<find ... -print0>):

  parallel -0 echo :::: abc0-file

Output: Same as above.

=head2 End-of-file value for input source

GNU B<parallel> can stop reading when it encounters a certain value:

  parallel -E stop echo ::: A B stop C D

Output:

  A
  B

=head2 Skipping empty lines

Using B<--no-run-if-empty> GNU B<parallel> will skip empty lines.

  (echo 1; echo; echo 2) | parallel --no-run-if-empty echo

Output:

  1
  2


=head1 Building the command line

=head2 No command means arguments are commands

If no command is given after parallel the arguments themselves are
treated as commands:

  parallel ::: ls 'echo foo' pwd

Output (the order may be different):

  [list of files in current dir]
  foo
  [/path/to/current/working/dir]

The command can be a script, a binary or a Bash function if the function is
exported using B<export -f>:

  # Only works in Bash
  my_func() {
    echo in my_func $1
  }
  export -f my_func
  parallel my_func ::: 1 2 3

Output (the order may be different):

  in my_func 1
  in my_func 2
  in my_func 3

=head2 Replacement strings

=head3 The 7 predefined replacement strings

GNU B<parallel> has several replacement strings. If no replacement
strings are used the default is to append B<{}>:

  parallel echo ::: dir/file.ext dir2/file2.ext2

Output:

  dir/file.ext
  dir2/file2.ext2

The default replacement string is B<{}>:

  parallel echo {} ::: dir/file.ext dir2/file2.ext2

Output:

  dir/file.ext
  dir2/file2.ext2

The replacement string B<{.}> removes the extension:

  parallel echo {.} ::: dir/file.ext dir2/file2.ext2

Output:

  dir/file
  dir2/file2

The replacement string B<{/}> removes the path:

  parallel echo {/} ::: dir/file.ext dir2/file2.ext2

Output:

  file.ext
  file2.ext2

The replacement string B<{//}> keeps only the path:

  parallel echo {//} ::: dir/file.ext dir2/file2.ext2

Output:

  dir
  dir2

The replacement string B<{/.}> removes the path and the extension:

  parallel echo {/.} ::: dir/file.ext dir2/file2.ext2

Output:

  file
  file2

The replacement string B<{#}> gives the job number:

  parallel echo {#} ::: A B C

Output (the order may be different):

  1
  2
  3

The replacement string B<{%}> gives the job slot number (between 1 and
number of jobs to run in parallel):

  parallel -j 2 echo {%} ::: A B C

Output (the order may be different and 1 and 2 may be swapped):

  1
  2
  1

=head3 Changing the replacement strings

The replacement string B<{}> can be changed with B<-I>:

  parallel -I ,, echo ,, ::: A/B.C

Output:

  A/B.C

The replacement string B<{.}> can be changed with B<--extensionreplace>:

  parallel --extensionreplace ,, echo ,, ::: A/B.C

Output:

  A/B

The replacement string B<{/}> can be replaced with B<--basenamereplace>:

  parallel --basenamereplace ,, echo ,, ::: A/B.C

Output:

  B.C

The replacement string B<{//}> can be changed with B<--dirnamereplace>:

  parallel --dirnamereplace ,, echo ,, ::: A/B.C

Output:

  A

The replacement string B<{/.}> can be changed with B<--basenameextensionreplace>:

  parallel --basenameextensionreplace ,, echo ,, ::: A/B.C

Output:

  B

The replacement string B<{#}> can be changed with B<--seqreplace>:

  parallel --seqreplace ,, echo ,, ::: A B C

Output (the order may be different):

  1
  2
  3

The replacement string B<{%}> can be changed with B<--slotreplace>:

  parallel -j2 --slotreplace ,, echo ,, ::: A B C

Output (the order may be different and 1 and 2 may be swapped):

  1
  2
  1

=head3 Perl expression replacement string

When predefined replacement strings are not flexible enough a perl
expression can be used instead. One example is to remove two
extensions: foo.tar.gz becomes foo

  parallel echo '{= s:\.[^.]+$::;s:\.[^.]+$::; =}' ::: foo.tar.gz

Output:

  foo

In B<{= =}> you can access all of GNU B<parallel>'s internal functions
and variables. A few are worth mentioning.

B<total_jobs()> returns the total number of jobs:

  parallel echo Job {#} of {= '$_=total_jobs()' =} ::: {1..5}

Output:

  Job 1 of 5
  Job 2 of 5
  Job 3 of 5
  Job 4 of 5
  Job 5 of 5

B<Q(...)> shell quotes the string:

  parallel echo {} shell quoted is {= '$_=Q($_)' =} ::: '*/!#$'

Output:

  */!#$ shell quoted is \*/\!\#\$

B<skip()> skips the job:

  parallel echo {= 'if($_==3) { skip() }' =} ::: {1..5}

Output:

  1
  2
  4
  5

B<@arg> contains the input source variables:

  parallel echo {= 'if($arg[1]==$arg[2]) { skip() }' =} \
    ::: {1..3} ::: {1..3}

Output:

  1 2
  1 3
  2 1
  2 3
  3 1
  3 2

If the strings B<{=> and B<=}> cause problems they can be replaced with B<--parens>:

  parallel --parens ,,,, echo ',, s:\.[^.]+$::;s:\.[^.]+$::; ,,' \
    ::: foo.tar.gz

Output:

  foo

To define a shorthand replacement string use B<--rpl>:

  parallel --rpl '.. s:\.[^.]+$::;s:\.[^.]+$::;' echo '..' \
    ::: foo.tar.gz

Output: Same as above.

If the shorthand starts with B<{> it can be used as a positional
replacement string, too:

  parallel --rpl '{..} s:\.[^.]+$::;s:\.[^.]+$::;' echo '{..}'
    ::: foo.tar.gz

Output: Same as above.

If the shorthand contains matching parenthesis the replacement string
becomes a dynamic replacement string and the string in the parenthesis
can be accessed as $$1. If there are multiple matching parenthesis,
the matched strings can be accessed using $$2, $$3 and so on.

You can think of this as giving arguments to the replacement
string. Here we give the argument B<.tar.gz> to the replacement string
B<{%I<string>}> which removes I<string>:

  parallel --rpl '{%(.+?)} s/$$1$//;' echo {%.tar.gz}.zip ::: foo.tar.gz

Output:

  foo.zip

Here we give the two arguments B<tar.gz> and B<zip> to the replacement
string B<{/I<string1>/I<string2>}> which replaces I<string1> with
I<string2>:

  parallel --rpl '{/(.+?)/(.*?)} s/$$1/$$2/;' echo {/tar.gz/zip} \
    ::: foo.tar.gz

Output:

  foo.zip


GNU B<parallel>'s 7 replacement strings are implemented as this:

  --rpl '{} '
  --rpl '{#} $_=$job->seq()'
  --rpl '{%} $_=$job->slot()'
  --rpl '{/} s:.*/::'
  --rpl '{//} $Global::use{"File::Basename"} ||=
           eval "use File::Basename; 1;"; $_ = dirname($_);'
  --rpl '{/.} s:.*/::; s:\.[^/.]+$::;'
  --rpl '{.} s:\.[^/.]+$::'

=head3 Positional replacement strings

With multiple input sources the argument from the individual input
sources can be accessed with S<< B<{>numberB<}> >>:

  parallel echo {1} and {2} ::: A B ::: C D

Output (the order may be different):

  A and C
  A and D
  B and C
  B and D

The positional replacement strings can also be modified using B</>, B<//>, B</.>, and  B<.>:

  parallel echo /={1/} //={1//} /.={1/.} .={1.} ::: A/B.C D/E.F

Output (the order may be different):

  /=B.C //=A /.=B .=A/B
  /=E.F //=D /.=E .=D/E

If a position is negative, it will refer to the input source counted
from behind:

  parallel echo 1={1} 2={2} 3={3} -1={-1} -2={-2} -3={-3} \
    ::: A B ::: C D ::: E F

Output (the order may be different):

  1=A 2=C 3=E -1=E -2=C -3=A
  1=A 2=C 3=F -1=F -2=C -3=A
  1=A 2=D 3=E -1=E -2=D -3=A
  1=A 2=D 3=F -1=F -2=D -3=A
  1=B 2=C 3=E -1=E -2=C -3=B
  1=B 2=C 3=F -1=F -2=C -3=B
  1=B 2=D 3=E -1=E -2=D -3=B
  1=B 2=D 3=F -1=F -2=D -3=B


=head3 Positional perl expression replacement string

To use a perl expression as a positional replacement string simply
prepend the perl expression with number and space:

  parallel echo '{=2 s:\.[^.]+$::;s:\.[^.]+$::; =} {1}' \
    ::: bar ::: foo.tar.gz

Output:

  foo bar

If a shorthand defined using B<--rpl> starts with B<{> it can be used as
a positional replacement string, too:

  parallel --rpl '{..} s:\.[^.]+$::;s:\.[^.]+$::;' echo '{2..} {1}' \
    ::: bar ::: foo.tar.gz

Output: Same as above.


=head3 Input from columns

The columns in a file can be bound to positional replacement strings
using B<--colsep>. Here the columns are separated by TAB (\t):

  parallel --colsep '\t' echo 1={1} 2={2} :::: tsv-file.tsv

Output (the order may be different):

  1=f1 2=f2
  1=A 2=B
  1=C 2=D

=head3 Header defined replacement strings

With B<--header> GNU B<parallel> will use the first value of the input
source as the name of the replacement string. Only the non-modified
version B<{}> is supported:

  parallel --header : echo f1={f1} f2={f2} ::: f1 A B ::: f2 C D

Output (the order may be different):

  f1=A f2=C
  f1=A f2=D
  f1=B f2=C
  f1=B f2=D

It is useful with B<--colsep> for processing files with TAB separated values:

  parallel --header : --colsep '\t' echo f1={f1} f2={f2} \
    :::: tsv-file.tsv

Output (the order may be different):

  f1=A f2=B
  f1=C f2=D

=head3 More pre-defined replacement strings with --plus

B<--plus> adds the replacement strings B<{+/} {+.} {+..} {+...} {..}  {...}
{/..} {/...} {##}>. The idea being that B<{+foo}> matches the opposite of B<{foo}>
and B<{}> = B<{+/}>/B<{/}> = B<{.}>.B<{+.}> = B<{+/}>/B<{/.}>.B<{+.}> = B<{..}>.B<{+..}> =
B<{+/}>/B<{/..}>.B<{+..}> = B<{...}>.B<{+...}> = B<{+/}>/B<{/...}>.B<{+...}>.

  parallel --plus echo {} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {+/}/{/} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {.}.{+.} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {+/}/{/.}.{+.} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {..}.{+..} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {+/}/{/..}.{+..} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {...}.{+...} ::: dir/sub/file.ex1.ex2.ex3
  parallel --plus echo {+/}/{/...}.{+...} ::: dir/sub/file.ex1.ex2.ex3

Output:

  dir/sub/file.ex1.ex2.ex3

B<{##}> is simply the number of jobs:

  parallel --plus echo Job {#} of {##} ::: {1..5}

Output:

  Job 1 of 5
  Job 2 of 5
  Job 3 of 5
  Job 4 of 5
  Job 5 of 5

=head3 Dynamic replacement strings with --plus

B<--plus> also defines these dynamic replacement strings:

=over 19

=item B<{:-I<string>}>

Default value is I<string> if the argument is empty.

=item B<{:I<number>}>

Substring from I<number> till end of string.

=item B<{:I<number1>:I<number2>}>

Substring from I<number1> to I<number2>.

=item B<{#I<string>}>

If the argument starts with I<string>, remove it.

=item B<{%I<string>}>

If the argument ends with I<string>, remove it.

=item B<{/I<string1>/I<string2>}>

Replace I<string1> with I<string2>.

=item B<{^I<string>}>

If the argument starts with I<string>, upper case it. I<string> must
be a single letter.

=item B<{^^I<string>}>

If the argument contains I<string>, upper case it. I<string> must be a
single letter.

=item B<{,I<string>}>

If the argument starts with I<string>, lower case it. I<string> must
be a single letter.

=item B<{,,I<string>}>

If the argument contains I<string>, lower case it. I<string> must be a
single letter.

=back

They are inspired from B<Bash>:

  unset myvar
  echo ${myvar:-myval}
  parallel --plus echo {:-myval} ::: "$myvar"

  myvar=abcAaAdef
  echo ${myvar:2}
  parallel --plus echo {:2} ::: "$myvar"

  echo ${myvar:2:3}
  parallel --plus echo {:2:3} ::: "$myvar"

  echo ${myvar#bc}
  parallel --plus echo {#bc} ::: "$myvar"
  echo ${myvar#abc}
  parallel --plus echo {#abc} ::: "$myvar"

  echo ${myvar%de}
  parallel --plus echo {%de} ::: "$myvar"
  echo ${myvar%def}
  parallel --plus echo {%def} ::: "$myvar"

  echo ${myvar/def/ghi}
  parallel --plus echo {/def/ghi} ::: "$myvar"

  echo ${myvar^a}
  parallel --plus echo {^a} ::: "$myvar"
  echo ${myvar^^a}
  parallel --plus echo {^^a} ::: "$myvar"

  myvar=AbcAaAdef
  echo ${myvar,A}
  parallel --plus echo '{,A}' ::: "$myvar"
  echo ${myvar,,A}
  parallel --plus echo '{,,A}' ::: "$myvar"

Output:

  myval
  myval
  cAaAdef
  cAaAdef
  cAa
  cAa
  abcAaAdef
  abcAaAdef
  AaAdef
  AaAdef
  abcAaAdef
  abcAaAdef
  abcAaA
  abcAaA
  abcAaAghi
  abcAaAghi
  AbcAaAdef
  AbcAaAdef
  AbcAAAdef
  AbcAAAdef
  abcAaAdef
  abcAaAdef
  abcaaadef
  abcaaadef


=head2 More than one argument

With B<--xargs> GNU B<parallel> will fit as many arguments as possible on a
single line:

  cat num30000 | parallel --xargs echo | wc -l

Output (if you run this under Bash on GNU/Linux):

  2

The 30000 arguments fitted on 2 lines.

The maximal length of a single line can be set with B<-s>. With a maximal
line length of 10000 chars 17 commands will be run:

  cat num30000 | parallel --xargs -s 10000 echo | wc -l

Output:

  17

For better parallelism GNU B<parallel> can distribute the arguments
between all the parallel jobs when end of file is met.

Below GNU B<parallel> reads the last argument when generating the second
job. When GNU B<parallel> reads the last argument, it spreads all the
arguments for the second job over 4 jobs instead, as 4 parallel jobs
are requested.

The first job will be the same as the B<--xargs> example above, but the
second job will be split into 4 evenly sized jobs, resulting in a
total of 5 jobs:

  cat num30000 | parallel --jobs 4 -m echo | wc -l

Output (if you run this under Bash on GNU/Linux):

  5

This is even more visible when running 4 jobs with 10 arguments. The
10 arguments are being spread over 4 jobs:

  parallel --jobs 4 -m echo ::: 1 2 3 4 5 6 7 8 9 10

Output:

  1 2 3
  4 5 6
  7 8 9
  10

A replacement string can be part of a word. B<-m> will not repeat the context:

  parallel --jobs 4 -m echo pre-{}-post ::: A B C D E F G

Output (the order may be different):

  pre-A B-post
  pre-C D-post
  pre-E F-post
  pre-G-post

To repeat the context use B<-X> which otherwise works like B<-m>:

  parallel --jobs 4 -X echo pre-{}-post ::: A B C D E F G

Output (the order may be different):

  pre-A-post pre-B-post
  pre-C-post pre-D-post
  pre-E-post pre-F-post
  pre-G-post

To limit the number of arguments use B<-N>:

  parallel -N3 echo ::: A B C D E F G H

Output (the order may be different):

  A B C
  D E F
  G H

B<-N> also sets the positional replacement strings:

  parallel -N3 echo 1={1} 2={2} 3={3} ::: A B C D E F G H

Output (the order may be different):

  1=A 2=B 3=C
  1=D 2=E 3=F
  1=G 2=H 3=

B<-N0> reads 1 argument but inserts none:

  parallel -N0 echo foo ::: 1 2 3

Output:

  foo
  foo
  foo

=head2 Quoting

Command lines that contain special characters may need to be protected from the shell.

The B<perl> program B<print "@ARGV\n"> basically works like B<echo>.

  perl -e 'print "@ARGV\n"' A

Output:

  A

To run that in parallel the command needs to be quoted:

  parallel perl -e 'print "@ARGV\n"' ::: This wont work

Output:

  [Nothing]

To quote the command use B<-q>:

  parallel -q perl -e 'print "@ARGV\n"' ::: This works

Output (the order may be different):

  This
  works

Or you can quote the critical part using B<\'>:

  parallel perl -e \''print "@ARGV\n"'\' ::: This works, too

Output (the order may be different):

  This
  works,
  too

GNU B<parallel> can also \-quote full lines. Simply run this:

  parallel --shellquote
  Warning: Input is read from the terminal. You either know what you
  Warning: are doing (in which case: YOU ARE AWESOME!) or you forgot
  Warning: ::: or :::: or to pipe data into parallel. If so
  Warning: consider going through the tutorial: man parallel_tutorial
  Warning: Press CTRL-D to exit.
  perl -e 'print "@ARGV\n"'
  [CTRL-D]

Output:

  perl\ -e\ \'print\ \"@ARGV\\n\"\'

This can then be used as the command:

  parallel perl\ -e\ \'print\ \"@ARGV\\n\"\' ::: This also works

Output (the order may be different):

  This
  also
  works


=head2 Trimming space

Space can be trimmed on the arguments using B<--trim>:

  parallel --trim r echo pre-{}-post ::: ' A '

Output:

  pre- A-post

To trim on the left side:

  parallel --trim l echo pre-{}-post ::: ' A '

Output:

  pre-A -post

To trim on the both sides:

  parallel --trim lr echo pre-{}-post ::: ' A '

Output:

  pre-A-post


=head2 Respecting the shell

This tutorial uses Bash as the shell. GNU B<parallel> respects which
shell you are using, so in B<zsh> you can do:

  parallel echo \={} ::: zsh bash ls

Output:

  /usr/bin/zsh
  /bin/bash
  /bin/ls

In B<csh> you can do:

  parallel 'set a="{}"; if( { test -d "$a" } ) echo "$a is a dir"' ::: *

Output:

  [somedir] is a dir

This also becomes useful if you use GNU B<parallel> in a shell script:
GNU B<parallel> will use the same shell as the shell script.


=head1 Controlling the output

The output can prefixed with the argument:

  parallel --tag echo foo-{} ::: A B C

Output (the order may be different):

  A       foo-A
  B       foo-B
  C       foo-C

To prefix it with another string use B<--tagstring>:

  parallel --tagstring {}-bar echo foo-{} ::: A B C

Output (the order may be different):

  A-bar   foo-A
  B-bar   foo-B
  C-bar   foo-C

To see what commands will be run without running them use B<--dryrun>:

  parallel --dryrun echo {} ::: A B C

Output (the order may be different):

  echo A
  echo B
  echo C

To print the command before running them use B<--verbose>:

  parallel --verbose echo {} ::: A B C

Output (the order may be different):

  echo A
  echo B
  A
  echo C
  B
  C

GNU B<parallel> will postpone the output until the command completes:

  parallel -j2 'printf "%s-start\n%s" {} {};
    sleep {};printf "%s\n" -middle;echo {}-end' ::: 4 2 1

Output:

  2-start
  2-middle
  2-end
  1-start
  1-middle
  1-end
  4-start
  4-middle
  4-end

To get the output immediately use B<--ungroup>:

  parallel -j2 --ungroup 'printf "%s-start\n%s" {} {};
    sleep {};printf "%s\n" -middle;echo {}-end' ::: 4 2 1

Output:

  4-start
  42-start
  2-middle
  2-end
  1-start
  1-middle
  1-end
  -middle
  4-end

B<--ungroup> is fast, but can cause half a line from one job to be mixed
with half a line of another job. That has happened in the second line,
where the line '4-middle' is mixed with '2-start'.

To avoid this use B<--linebuffer>:

  parallel -j2 --linebuffer 'printf "%s-start\n%s" {} {};
    sleep {};printf "%s\n" -middle;echo {}-end' ::: 4 2 1

Output:

  4-start
  2-start
  2-middle
  2-end
  1-start
  1-middle
  1-end
  4-middle
  4-end

To force the output in the same order as the arguments use B<--keep-order>/B<-k>:

  parallel -j2 -k 'printf "%s-start\n%s" {} {};
    sleep {};printf "%s\n" -middle;echo {}-end' ::: 4 2 1

Output:

  4-start
  4-middle
  4-end
  2-start
  2-middle
  2-end
  1-start
  1-middle
  1-end


=head2 Saving output into files

GNU B<parallel> can save the output of each job into files:

  parallel --files echo ::: A B C

Output will be similar to this:

  /tmp/pAh6uWuQCg.par
  /tmp/opjhZCzAX4.par
  /tmp/W0AT_Rph2o.par

By default GNU B<parallel> will cache the output in files in B</tmp>. This
can be changed by setting B<$TMPDIR> or B<--tmpdir>:

  parallel --tmpdir /var/tmp --files echo ::: A B C

Output will be similar to this:

  /var/tmp/N_vk7phQRc.par
  /var/tmp/7zA4Ccf3wZ.par
  /var/tmp/LIuKgF_2LP.par

Or:

  TMPDIR=/var/tmp parallel --files echo ::: A B C

Output: Same as above.

The output files can be saved in a structured way using B<--results>:

  parallel --results outdir echo ::: A B C

Output:

  A
  B
  C

These files were also generated containing the standard output
(stdout), standard error (stderr), and the sequence number (seq):

  outdir/1/A/seq
  outdir/1/A/stderr
  outdir/1/A/stdout
  outdir/1/B/seq
  outdir/1/B/stderr
  outdir/1/B/stdout
  outdir/1/C/seq
  outdir/1/C/stderr
  outdir/1/C/stdout

B<--header :> will take the first value as name and use that in the
directory structure. This is useful if you are using multiple input
sources:

  parallel --header : --results outdir echo ::: f1 A B ::: f2 C D

Generated files:

  outdir/f1/A/f2/C/seq
  outdir/f1/A/f2/C/stderr
  outdir/f1/A/f2/C/stdout
  outdir/f1/A/f2/D/seq
  outdir/f1/A/f2/D/stderr
  outdir/f1/A/f2/D/stdout
  outdir/f1/B/f2/C/seq
  outdir/f1/B/f2/C/stderr
  outdir/f1/B/f2/C/stdout
  outdir/f1/B/f2/D/seq
  outdir/f1/B/f2/D/stderr
  outdir/f1/B/f2/D/stdout

The directories are named after the variables and their values.

=head1 Controlling the execution

=head2 Number of simultaneous jobs

The number of concurrent jobs is given with B<--jobs>/B<-j>:

  /usr/bin/time parallel -N0 -j64 sleep 1 :::: num128

With 64 jobs in parallel the 128 B<sleep>s will take 2-8 seconds to run -
depending on how fast your machine is.

By default B<--jobs> is the same as the number of CPU cores. So this:

  /usr/bin/time parallel -N0 sleep 1 :::: num128

should take twice the time of running 2 jobs per CPU core:

  /usr/bin/time parallel -N0 --jobs 200% sleep 1 :::: num128

B<--jobs 0> will run as many jobs in parallel as possible:

  /usr/bin/time parallel -N0 --jobs 0 sleep 1 :::: num128

which should take 1-7 seconds depending on how fast your machine is.

B<--jobs> can read from a file which is re-read when a job finishes:

  echo 50% > my_jobs
  /usr/bin/time parallel -N0 --jobs my_jobs sleep 1 :::: num128 &
  sleep 1
  echo 0 > my_jobs
  wait

The first second only 50% of the CPU cores will run a job. Then B<0> is
put into B<my_jobs> and then the rest of the jobs will be started in
parallel.

Instead of basing the percentage on the number of CPU cores
GNU B<parallel> can base it on the number of CPUs:

  parallel --use-cpus-instead-of-cores -N0 sleep 1 :::: num8

=head2 Shuffle job order

If you have many jobs (e.g. by multiple combinations of input
sources), it can be handy to shuffle the jobs, so you get different
values run. Use B<--shuf> for that:

  parallel --shuf echo ::: 1 2 3 ::: a b c ::: A B C

Output:

  All combinations but different order for each run.

=head2 Interactivity

GNU B<parallel> can ask the user if a command should be run using B<--interactive>:

  parallel --interactive echo ::: 1 2 3

Output:

  echo 1 ?...y
  echo 2 ?...n
  1
  echo 3 ?...y
  3

GNU B<parallel> can be used to put arguments on the command line for an
interactive command such as B<emacs> to edit one file at a time:

  parallel --tty emacs ::: 1 2 3

Or give multiple argument in one go to open multiple files:

  parallel -X --tty vi ::: 1 2 3

=head2 A terminal for every job

Using B<--tmux> GNU B<parallel> can start a terminal for every job run:

  seq 10 20 | parallel --tmux 'echo start {}; sleep {}; echo done {}'

This will tell you to run something similar to:

  tmux -S /tmp/tmsrPrO0 attach

Using normal B<tmux> keystrokes (CTRL-b n or CTRL-b p) you can cycle
between windows of the running jobs. When a job is finished it will
pause for 10 seconds before closing the window.

=head2 Timing

Some jobs do heavy I/O when they start. To avoid a thundering herd GNU
B<parallel> can delay starting new jobs. B<--delay> I<X> will make
sure there is at least I<X> seconds between each start:

  parallel --delay 2.5 echo Starting {}\;date ::: 1 2 3

Output:

  Starting 1
  Thu Aug 15 16:24:33 CEST 2013
  Starting 2
  Thu Aug 15 16:24:35 CEST 2013
  Starting 3
  Thu Aug 15 16:24:38 CEST 2013


If jobs taking more than a certain amount of time are known to fail,
they can be stopped with B<--timeout>. The accuracy of B<--timeout> is
2 seconds:

  parallel --timeout 4.1 sleep {}\; echo {} ::: 2 4 6 8

Output:

  2
  4

GNU B<parallel> can compute the median runtime for jobs and kill those
that take more than 200% of the median runtime:

  parallel --timeout 200% sleep {}\; echo {} ::: 2.1 2.2 3 7 2.3

Output:

  2.1
  2.2
  3
  2.3

=head2 Progress information

Based on the runtime of completed jobs GNU B<parallel> can estimate the
total runtime:

  parallel --eta sleep ::: 1 3 2 2 1 3 3 2 1

Output:

  Computers / CPU cores / Max jobs to run
  1:local / 2 / 2

  Computer:jobs running/jobs completed/%of started jobs/
    Average seconds to complete
  ETA: 2s 0left 1.11avg  local:0/9/100%/1.1s

GNU B<parallel> can give progress information with B<--progress>:

  parallel --progress sleep ::: 1 3 2 2 1 3 3 2 1

Output:

  Computers / CPU cores / Max jobs to run
  1:local / 2 / 2

  Computer:jobs running/jobs completed/%of started jobs/
    Average seconds to complete
  local:0/9/100%/1.1s

A progress bar can be shown with B<--bar>:

  parallel --bar sleep ::: 1 3 2 2 1 3 3 2 1

And a graphic bar can be shown with B<--bar> and B<zenity>:

  seq 1000 | parallel -j10 --bar '(echo -n {};sleep 0.1)' \
    2> >(perl -pe 'BEGIN{$/="\r";$|=1};s/\r/\n/g' |
         zenity --progress --auto-kill --auto-close)

A logfile of the jobs completed so far can be generated with B<--joblog>:

  parallel --joblog /tmp/log exit  ::: 1 2 3 0
  cat /tmp/log

Output:

  Seq Host Starttime      Runtime Send Receive Exitval Signal Command
  1   :    1376577364.974 0.008   0    0       1       0      exit 1
  2   :    1376577364.982 0.013   0    0       2       0      exit 2
  3   :    1376577364.990 0.013   0    0       3       0      exit 3
  4   :    1376577365.003 0.003   0    0       0       0      exit 0

The log contains the job sequence, which host the job was run on, the
start time and run time, how much data was transferred, the exit
value, the signal that killed the job, and finally the command being
run.

With a joblog GNU B<parallel> can be stopped and later pickup where it
left off. It it important that the input of the completed jobs is
unchanged.

  parallel --joblog /tmp/log exit  ::: 1 2 3 0
  cat /tmp/log
  parallel --resume --joblog /tmp/log exit  ::: 1 2 3 0 0 0
  cat /tmp/log

Output:

  Seq Host Starttime      Runtime Send Receive Exitval Signal Command
  1   :    1376580069.544 0.008   0    0       1       0      exit 1
  2   :    1376580069.552 0.009   0    0       2       0      exit 2
  3   :    1376580069.560 0.012   0    0       3       0      exit 3
  4   :    1376580069.571 0.005   0    0       0       0      exit 0

  Seq Host Starttime      Runtime Send Receive Exitval Signal Command
  1   :    1376580069.544 0.008   0    0       1       0      exit 1
  2   :    1376580069.552 0.009   0    0       2       0      exit 2
  3   :    1376580069.560 0.012   0    0       3       0      exit 3
  4   :    1376580069.571 0.005   0    0       0       0      exit 0
  5   :    1376580070.028 0.009   0    0       0       0      exit 0
  6   :    1376580070.038 0.007   0    0       0       0      exit 0

Note how the start time of the last 2 jobs is clearly different from the second run.

With B<--resume-failed> GNU B<parallel> will re-run the jobs that failed:

  parallel --resume-failed --joblog /tmp/log exit  ::: 1 2 3 0 0 0
  cat /tmp/log

Output:

  Seq Host Starttime      Runtime Send Receive Exitval Signal Command
  1   :    1376580069.544 0.008   0    0       1       0      exit 1
  2   :    1376580069.552 0.009   0    0       2       0      exit 2
  3   :    1376580069.560 0.012   0    0       3       0      exit 3
  4   :    1376580069.571 0.005   0    0       0       0      exit 0
  5   :    1376580070.028 0.009   0    0       0       0      exit 0
  6   :    1376580070.038 0.007   0    0       0       0      exit 0
  1   :    1376580154.433 0.010   0    0       1       0      exit 1
  2   :    1376580154.444 0.022   0    0       2       0      exit 2
  3   :    1376580154.466 0.005   0    0       3       0      exit 3

Note how seq 1 2 3 have been repeated because they had exit value
different from 0.

B<--retry-failed> does almost the same as B<--resume-failed>. Where
B<--resume-failed> reads the commands from the command line (and
ignores the commands in the joblog), B<--retry-failed> ignores the
command line and reruns the commands mentioned in the joblog.

  parallel --retry-failed --joblog /tmp/log
  cat /tmp/log

Output:

  Seq Host Starttime      Runtime Send Receive Exitval Signal Command
  1   :    1376580069.544 0.008   0    0       1       0      exit 1
  2   :    1376580069.552 0.009   0    0       2       0      exit 2
  3   :    1376580069.560 0.012   0    0       3       0      exit 3
  4   :    1376580069.571 0.005   0    0       0       0      exit 0
  5   :    1376580070.028 0.009   0    0       0       0      exit 0
  6   :    1376580070.038 0.007   0    0       0       0      exit 0
  1   :    1376580154.433 0.010   0    0       1       0      exit 1
  2   :    1376580154.444 0.022   0    0       2       0      exit 2
  3   :    1376580154.466 0.005   0    0       3       0      exit 3
  1   :    1376580164.633 0.010   0    0       1       0      exit 1
  2   :    1376580164.644 0.022   0    0       2       0      exit 2
  3   :    1376580164.666 0.005   0    0       3       0      exit 3


=head2 Termination

=head3 Unconditional termination

By default GNU B<parallel> will wait for all jobs to finish before exiting.

If you send GNU B<parallel> the B<TERM> signal, GNU B<parallel> will
stop spawning new jobs and wait for the remaining jobs to finish. If
you send GNU B<parallel> the B<TERM> signal again, GNU B<parallel>
will kill all running jobs and exit.

=head3 Termination dependent on job status

For certain jobs there is no need to continue if one of the jobs fails
and has an exit code different from 0. GNU B<parallel> will stop spawning new jobs
with B<--halt soon,fail=1>:

  parallel -j2 --halt soon,fail=1 echo {}\; exit {} ::: 0 0 1 2 3

Output:

  0
  0
  1
  parallel: This job failed:
  echo 1; exit 1
  parallel: Starting no more jobs. Waiting for 1 jobs to finish.
  2

With B<--halt now,fail=1> the running jobs will be killed immediately:

  parallel -j2 --halt now,fail=1 echo {}\; exit {} ::: 0 0 1 2 3

Output:

  0
  0
  1
  parallel: This job failed:
  echo 1; exit 1

If B<--halt> is given a percentage this percentage of the jobs must fail
before GNU B<parallel> stops spawning more jobs:

  parallel -j2 --halt soon,fail=20% echo {}\; exit {} \
    ::: 0 1 2 3 4 5 6 7 8 9

Output:

  0
  1
  parallel: This job failed:
  echo 1; exit 1
  2
  parallel: This job failed:
  echo 2; exit 2
  parallel: Starting no more jobs. Waiting for 1 jobs to finish.
  3
  parallel: This job failed:
  echo 3; exit 3

If you are looking for success instead of failures, you can use
B<success>. This will finish as soon as the first job succeeds:

  parallel -j2 --halt now,success=1 echo {}\; exit {} ::: 1 2 3 0 4 5 6

Output:

  1
  2
  3
  0
  parallel: This job succeeded:
  echo 0; exit 0

GNU B<parallel> can retry the command with B<--retries>. This is useful if a
command fails for unknown reasons now and then.

  parallel -k --retries 3 \
    'echo tried {} >>/tmp/runs; echo completed {}; exit {}' ::: 1 2 0
  cat /tmp/runs

Output:

  completed 1
  completed 2
  completed 0

  tried 1
  tried 2
  tried 1
  tried 2
  tried 1
  tried 2
  tried 0

Note how job 1 and 2 were tried 3 times, but 0 was not retried because it had exit code 0.

=head3 Termination signals (advanced)

Using B<--termseq> you can control which signals are sent when killing
children. Normally children will be killed by sending them B<SIGTERM>,
waiting 200 ms, then another B<SIGTERM>, waiting 100 ms, then another
B<SIGTERM>, waiting 50 ms, then a B<SIGKILL>, finally waiting 25 ms
before giving up. It looks like this:

  show_signals() {
    perl -e 'for(keys %SIG) {
        $SIG{$_} = eval "sub { print \"Got $_\\n\"; }";
      }
      while(1){sleep 1}'
  }
  export -f show_signals
  echo | parallel --termseq TERM,200,TERM,100,TERM,50,KILL,25 \
    -u --timeout 1 show_signals

Output:

  Got TERM
  Got TERM
  Got TERM

Or just:

  echo | parallel -u --timeout 1 show_signals

Output: Same as above.

You can change this to B<SIGINT>, B<SIGTERM>, B<SIGKILL>:

  echo | parallel --termseq INT,200,TERM,100,KILL,25 \
    -u --timeout 1 show_signals

Output:

  Got INT
  Got TERM

The B<SIGKILL> does not show because it cannot be caught, and thus the
child dies.


=head2 Limiting the resources

To avoid overloading systems GNU B<parallel> can look at the system load
before starting another job:

  parallel --load 100% echo load is less than {} job per cpu ::: 1

Output:

  [when then load is less than the number of cpu cores]
  load is less than 1 job per cpu

GNU B<parallel> can also check if the system is swapping.

  parallel --noswap echo the system is not swapping ::: now

Output:

  [when then system is not swapping]
  the system is not swapping now

Some jobs need a lot of memory, and should only be started when there
is enough memory free. Using B<--memfree> GNU B<parallel> can check if
there is enough memory free. Additionally, GNU B<parallel> will kill
off the youngest job if the memory free falls below 50% of the
size. The killed job will put back on the queue and retried later.

  parallel --memfree 1G echo will run if more than 1 GB is ::: free

GNU B<parallel> can run the jobs with a nice value. This will work both
locally and remotely.

  parallel --nice 17 echo this is being run with nice -n ::: 17

Output:

  this is being run with nice -n 17

=head1 Remote execution

GNU B<parallel> can run jobs on remote servers. It uses B<ssh> to
communicate with the remote machines.

=head2 Sshlogin

The most basic sshlogin is B<-S> I<host>:

  parallel -S $SERVER1 echo running on ::: $SERVER1

Output:

  running on [$SERVER1]

To use a different username prepend the server with I<username@>:

  parallel -S username@$SERVER1 echo running on ::: username@$SERVER1

Output:

  running on [username@$SERVER1]

The special sshlogin B<:> is the local machine:

  parallel -S : echo running on ::: the_local_machine

Output:

  running on the_local_machine

If B<ssh> is not in $PATH it can be prepended to $SERVER1:

  parallel -S '/usr/bin/ssh '$SERVER1 echo custom ::: ssh

Output:

  custom ssh

The B<ssh> command can also be given using B<--ssh>:

  parallel --ssh /usr/bin/ssh -S $SERVER1 echo custom ::: ssh

or by setting B<$PARALLEL_SSH>:

  export PARALLEL_SSH=/usr/bin/ssh
  parallel -S $SERVER1 echo custom ::: ssh

Several servers can be given using multiple B<-S>:

  parallel -S $SERVER1 -S $SERVER2 echo ::: running on more hosts

Output (the order may be different):

  running
  on
  more
  hosts

Or they can be separated by B<,>:

  parallel -S $SERVER1,$SERVER2 echo ::: running on more hosts

Output: Same as above.

Or newline:

  # This gives a \n between $SERVER1 and $SERVER2
  SERVERS="`echo $SERVER1; echo $SERVER2`"
  parallel -S "$SERVERS" echo ::: running on more hosts

They can also be read from a file (replace I<user@> with the user on B<$SERVER2>):

  echo $SERVER1 > nodefile
  # Force 4 cores, special ssh-command, username
  echo 4//usr/bin/ssh user@$SERVER2 >> nodefile
  parallel --sshloginfile nodefile echo ::: running on more hosts

Output: Same as above.

Every time a job finished, the B<--sshloginfile> will be re-read, so
it is possible to both add and remove hosts while running.

The special B<--sshloginfile ..> reads from B<~/.parallel/sshloginfile>.

To force GNU B<parallel> to treat a server having a given number of CPU
cores prepend the number of core followed by B</> to the sshlogin:

  parallel -S 4/$SERVER1 echo force {} cpus on server ::: 4

Output:

  force 4 cpus on server

Servers can be put into groups by prepending I<@groupname> to the
server and the group can then be selected by appending I<@groupname> to
the argument if using B<--hostgroup>:

  parallel --hostgroup -S @grp1/$SERVER1 -S @grp2/$SERVER2 echo {} \
    ::: run_on_grp1@grp1 run_on_grp2@grp2

Output:

  run_on_grp1
  run_on_grp2

A host can be in multiple groups by separating the groups with B<+>, and
you can force GNU B<parallel> to limit the groups on which the command
can be run with B<-S> I<@groupname>:

  parallel -S @grp1 -S @grp1+grp2/$SERVER1 -S @grp2/SERVER2 echo {} \
    ::: run_on_grp1 also_grp1

Output:

  run_on_grp1
  also_grp1

=head2 Transferring files

GNU B<parallel> can transfer the files to be processed to the remote
host. It does that using rsync.

  echo This is input_file > input_file
  parallel -S $SERVER1 --transferfile {} cat ::: input_file

Output:

  This is input_file

If the files are processed into another file, the resulting file can be
transferred back:

  echo This is input_file > input_file
  parallel -S $SERVER1 --transferfile {} --return {}.out \
    cat {} ">"{}.out ::: input_file
  cat input_file.out

Output: Same as above.

To remove the input and output file on the remote server use B<--cleanup>:

  echo This is input_file > input_file
  parallel -S $SERVER1 --transferfile {} --return {}.out --cleanup \
    cat {} ">"{}.out ::: input_file
  cat input_file.out

Output: Same as above.

There is a shorthand for B<--transferfile {} --return --cleanup> called B<--trc>:

  echo This is input_file > input_file
  parallel -S $SERVER1 --trc {}.out cat {} ">"{}.out ::: input_file
  cat input_file.out

Output: Same as above.

Some jobs need a common database for all jobs. GNU B<parallel> can
transfer that using B<--basefile> which will transfer the file before the
first job:

  echo common data > common_file
  parallel --basefile common_file -S $SERVER1 \
    cat common_file\; echo {} ::: foo

Output:

  common data
  foo

To remove it from the remote host after the last job use B<--cleanup>.


=head2 Working dir

The default working dir on the remote machines is the login dir. This
can be changed with B<--workdir> I<mydir>.

Files transferred using B<--transferfile> and B<--return> will be relative
to I<mydir> on remote computers, and the command will be executed in
the dir I<mydir>.

The special I<mydir> value B<...> will create working dirs under
B<~/.parallel/tmp> on the remote computers. If B<--cleanup> is given
these dirs will be removed.

The special I<mydir> value B<.> uses the current working dir.  If the
current working dir is beneath your home dir, the value B<.> is
treated as the relative path to your home dir. This means that if your
home dir is different on remote computers (e.g. if your login is
different) the relative path will still be relative to your home dir.

  parallel -S $SERVER1 pwd ::: ""
  parallel --workdir . -S $SERVER1 pwd ::: ""
  parallel --workdir ... -S $SERVER1 pwd ::: ""

Output:

  [the login dir on $SERVER1]
  [current dir relative on $SERVER1]
  [a dir in ~/.parallel/tmp/...]


=head2 Avoid overloading sshd

If many jobs are started on the same server, B<sshd> can be
overloaded. GNU B<parallel> can insert a delay between each job run on
the same server:

  parallel -S $SERVER1 --sshdelay 0.2 echo ::: 1 2 3

Output (the order may be different):

  1
  2
  3

B<sshd> will be less overloaded if using B<--controlmaster>, which will
multiplex ssh connections:

  parallel --controlmaster -S $SERVER1 echo ::: 1 2 3

Output: Same as above.

=head2 Ignore hosts that are down

In clusters with many hosts a few of them are often down. GNU B<parallel>
can ignore those hosts. In this case the host 173.194.32.46 is down:

  parallel --filter-hosts -S 173.194.32.46,$SERVER1 echo ::: bar

Output:

  bar

=head2 Running the same commands on all hosts

GNU B<parallel> can run the same command on all the hosts:

  parallel --onall -S $SERVER1,$SERVER2 echo ::: foo bar

Output (the order may be different):

  foo
  bar
  foo
  bar

Often you will just want to run a single command on all hosts with out
arguments. B<--nonall> is a no argument B<--onall>:

  parallel --nonall -S $SERVER1,$SERVER2 echo foo bar

Output:

  foo bar
  foo bar

When B<--tag> is used with B<--nonall> and B<--onall> the B<--tagstring> is the host:

  parallel --nonall --tag -S $SERVER1,$SERVER2 echo foo bar

Output (the order may be different):

  $SERVER1 foo bar
  $SERVER2 foo bar

B<--jobs> sets the number of servers to log in to in parallel.

=head2 Transferring environment variables and functions

B<env_parallel> is a shell function that transfers all aliases,
functions, variables, and arrays. You active it by running:

  source `which env_parallel.bash`

Replace B<bash> with the shell you use.

Now you can use B<env_parallel> instead of B<parallel> and still have
your environment:

  alias myecho=echo
  myvar="Joe's var is"
  env_parallel -S $SERVER1 'myecho $myvar' ::: green

Output:

  Joe's var is green

The disadvantage is that if your environment is huge B<env_parallel>
will fail.

When B<env_parallel> fails, you can still use B<--env> to tell GNU
B<parallel> to transfer an environment variable to the remote system.

  MYVAR='foo bar'
  export MYVAR
  parallel --env MYVAR -S $SERVER1 echo '$MYVAR' ::: baz

Output:

  foo bar baz

This works for functions, too, if your shell is Bash:

  # This only works in Bash
  my_func() {
    echo in my_func $1
  }
  export -f my_func
  parallel --env my_func -S $SERVER1 my_func ::: baz

Output:

  in my_func baz

GNU B<parallel> can copy all user defined variables and functions to
the remote system. It just needs to record which ones to ignore in
B<~/.parallel/ignored_vars>. Do that by running this once:

  parallel --record-env
  cat ~/.parallel/ignored_vars

Output:

  [list of variables to ignore - including $PATH and $HOME]

Now all other variables and functions defined will be copied when
using B<--env _>.

  # The function is only copied if using Bash
  my_func2() {
    echo in my_func2 $VAR $1
  }
  export -f my_func2
  VAR=foo
  export VAR

  parallel --env _ -S $SERVER1 'echo $VAR; my_func2' ::: bar

Output:

  foo
  in my_func2 foo bar

If you use B<env_parallel> the variables, functions, and aliases do
not even need to be exported to be copied:

  NOT='not exported var'
  alias myecho=echo
  not_ex() {
    myecho in not_exported_func $NOT $1
  }
  env_parallel --env _ -S $SERVER1 'echo $NOT; not_ex' ::: bar

Output:

  not exported var
  in not_exported_func not exported var bar


=head2 Showing what is actually run

B<--verbose> will show the command that would be run on the local
machine.

When using B<--cat>, B<--pipepart>, or when a job is run on a remote
machine, the command is wrapped with helper scripts. B<-vv> shows all
of this.

  parallel -vv --pipepart --block 1M wc :::: num30000

Output:

  <num30000 perl -e 'while(@ARGV) { sysseek(STDIN,shift,0) || die;
  $left = shift; while($read = sysread(STDIN,$buf, ($left > 131072
  ? 131072 : $left))){ $left -= $read; syswrite(STDOUT,$buf); } }'
  0 0 0 168894 | (wc)
    30000   30000  168894

When the command gets more complex, the output is so hard to read,
that it is only useful for debugging:

  my_func3() {
    echo in my_func $1 > $1.out
  }
  export -f my_func3
  parallel -vv --workdir ... --nice 17 --env _ --trc {}.out \
    -S $SERVER1 my_func3 {} ::: abc-file

Output will be similar to:


  ( ssh server -- mkdir -p ./.parallel/tmp/aspire-1928520-1;rsync
  --protocol 30 -rlDzR -essh ./abc-file 
  server:./.parallel/tmp/aspire-1928520-1 );ssh server -- exec perl -e 
  \''@GNU_Parallel=("use","IPC::Open3;","use","MIME::Base64");
  eval"@GNU_Parallel";my$eval=decode_base64(join"",@ARGV);eval$eval;'\'
  c3lzdGVtKCJta2RpciIsIi1wIiwiLS0iLCIucGFyYWxsZWwvdG1wL2FzcGlyZS0xOTI4N
  TsgY2hkaXIgIi5wYXJhbGxlbC90bXAvYXNwaXJlLTE5Mjg1MjAtMSIgfHxwcmludChTVE
  BhcmFsbGVsOiBDYW5ub3QgY2hkaXIgdG8gLnBhcmFsbGVsL3RtcC9hc3BpcmUtMTkyODU
  iKSAmJiBleGl0IDI1NTskRU5WeyJPTERQV0QifT0iL2hvbWUvdGFuZ2UvcHJpdmF0L3Bh
  IjskRU5WeyJQQVJBTExFTF9QSUQifT0iMTkyODUyMCI7JEVOVnsiUEFSQUxMRUxfU0VRI
  0BiYXNoX2Z1bmN0aW9ucz1xdyhteV9mdW5jMyk7IGlmKCRFTlZ7IlNIRUxMIn09fi9jc2
  ByaW50IFNUREVSUiAiQ1NIL1RDU0ggRE8gTk9UIFNVUFBPUlQgbmV3bGluZXMgSU4gVkF
  TL0ZVTkNUSU9OUy4gVW5zZXQgQGJhc2hfZnVuY3Rpb25zXG4iOyBleGVjICJmYWxzZSI7
  YXNoZnVuYyA9ICJteV9mdW5jMygpIHsgIGVjaG8gaW4gbXlfZnVuYyBcJDEgPiBcJDEub
  Xhwb3J0IC1mIG15X2Z1bmMzID4vZGV2L251bGw7IjtAQVJHVj0ibXlfZnVuYzMgYWJjLW
  RzaGVsbD0iJEVOVntTSEVMTH0iOyR0bXBkaXI9Ii90bXAiOyRuaWNlPTE3O2RveyRFTlZ
  MRUxfVE1QfT0kdG1wZGlyLiIvcGFyIi5qb2luIiIsbWFweygwLi45LCJhIi4uInoiLCJB
  KVtyYW5kKDYyKV19KDEuLjUpO313aGlsZSgtZSRFTlZ7UEFSQUxMRUxfVE1QfSk7JFNJ
  fT1zdWJ7JGRvbmU9MTt9OyRwaWQ9Zm9yazt1bmxlc3MoJHBpZCl7c2V0cGdycDtldmFse
  W9yaXR5KDAsMCwkbmljZSl9O2V4ZWMkc2hlbGwsIi1jIiwoJGJhc2hmdW5jLiJAQVJHVi
  JleGVjOiQhXG4iO31kb3skcz0kczwxPzAuMDAxKyRzKjEuMDM6JHM7c2VsZWN0KHVuZGV
  mLHVuZGVmLCRzKTt9dW50aWwoJGRvbmV8fGdldHBwaWQ9PTEpO2tpbGwoU0lHSFVQLC0k
  dW5sZXNzJGRvbmU7d2FpdDtleGl0KCQ/JjEyNz8xMjgrKCQ/JjEyNyk6MSskPz4+OCk=;
  _EXIT_status=$?; mkdir -p ./.; rsync --protocol 30 --rsync-path=cd\
  ./.parallel/tmp/aspire-1928520-1/./.\;\ rsync -rlDzR -essh
  server:./abc-file.out ./.;ssh server -- \(rm\ -f\
  ./.parallel/tmp/aspire-1928520-1/abc-file\;\ sh\ -c\ \'rmdir\
  ./.parallel/tmp/aspire-1928520-1/\ ./.parallel/tmp/\ ./.parallel/\
  2\>/dev/null\'\;rm\ -rf\ ./.parallel/tmp/aspire-1928520-1\;\);ssh
  server -- \(rm\ -f\ ./.parallel/tmp/aspire-1928520-1/abc-file.out\;\
  sh\ -c\ \'rmdir\ ./.parallel/tmp/aspire-1928520-1/\ ./.parallel/tmp/\
  ./.parallel/\ 2\>/dev/null\'\;rm\ -rf\ 
  ./.parallel/tmp/aspire-1928520-1\;\);ssh server -- rm -rf 
  .parallel/tmp/aspire-1928520-1; exit $_EXIT_status;

=head1 Saving output to shell variables (advanced)

GNU B<parset> will set shell variables to the output of GNU
B<parallel>. GNU B<parset> has one important limitation: It cannot be
part of a pipe. In particular this means it cannot read anything from
standard input (stdin) or pipe output to another program.

To use GNU B<parset> prepend command with destination variables:

  parset myvar1,myvar2 echo ::: a b
  echo $myvar1
  echo $myvar2

Output:

  a
  b

If you only give a single variable, it will be treated as an array:

  parset myarray seq {} 5 ::: 1 2 3
  echo "${myarray[1]}"

Output:

  2
  3
  4
  5

The commands to run can be an array:

  cmd=("echo '<<joe  \"double  space\"  cartoon>>'" "pwd")
  parset data ::: "${cmd[@]}"
  echo "${data[0]}"
  echo "${data[1]}"

Output:

  <<joe  "double  space"  cartoon>>
  [current dir]


=head1 Saving to an SQL base (advanced)

GNU B<parallel> can save into an SQL base. Point GNU B<parallel> to a
table and it will put the joblog there together with the variables and
the output each in their own column.

=head2 CSV as SQL base

The simplest is to use a CSV file as the storage table:

  parallel --sqlandworker csv:///%2Ftmp/log.csv \
    seq ::: 10 ::: 12 13 14
  cat /tmp/log.csv

Note how '/' in the path must be written as %2F.

Output will be similar to:

  Seq,Host,Starttime,JobRuntime,Send,Receive,Exitval,_Signal,
    Command,V1,V2,Stdout,Stderr
  1,:,1458254498.254,0.069,0,9,0,0,"seq 10 12",10,12,"10
  11
  12
  ",
  2,:,1458254498.278,0.080,0,12,0,0,"seq 10 13",10,13,"10
  11
  12
  13
  ",
  3,:,1458254498.301,0.083,0,15,0,0,"seq 10 14",10,14,"10
  11
  12
  13
  14
  ",

A proper CSV reader (like LibreOffice or R's read.csv) will read this
format correctly - even with fields containing newlines as above.

If the output is big you may want to put it into files using B<--results>:

  parallel --results outdir --sqlandworker csv:///%2Ftmp/log2.csv \
    seq ::: 10 ::: 12 13 14
  cat /tmp/log2.csv

Output will be similar to:

  Seq,Host,Starttime,JobRuntime,Send,Receive,Exitval,_Signal,
    Command,V1,V2,Stdout,Stderr
  1,:,1458824738.287,0.029,0,9,0,0,
    "seq 10 12",10,12,outdir/1/10/2/12/stdout,outdir/1/10/2/12/stderr
  2,:,1458824738.298,0.025,0,12,0,0,
    "seq 10 13",10,13,outdir/1/10/2/13/stdout,outdir/1/10/2/13/stderr
  3,:,1458824738.309,0.026,0,15,0,0,
    "seq 10 14",10,14,outdir/1/10/2/14/stdout,outdir/1/10/2/14/stderr


=head2 DBURL as table

The CSV file is an example of a DBURL.

GNU B<parallel> uses a DBURL to address the table. A DBURL has this format:

  vendor://[[user][:password]@][host][:port]/[database[/table]

Example:

  mysql://scott:tiger@my.example.com/mydatabase/mytable
  postgresql://scott:tiger@pg.example.com/mydatabase/mytable
  sqlite3:///%2Ftmp%2Fmydatabase/mytable
  csv:///%2Ftmp/log.csv

To refer to B</tmp/mydatabase> with B<sqlite> or B<csv> you need to
encode the B</> as B<%2F>.

Run a job using B<sqlite> on B<mytable> in B</tmp/mydatabase>:

  DBURL=sqlite3:///%2Ftmp%2Fmydatabase
  DBURLTABLE=$DBURL/mytable
  parallel --sqlandworker $DBURLTABLE echo ::: foo bar ::: baz quuz

To see the result:

  sql $DBURL 'SELECT * FROM mytable ORDER BY Seq;'

Output will be similar to:

  Seq|Host|Starttime|JobRuntime|Send|Receive|Exitval|_Signal|
    Command|V1|V2|Stdout|Stderr
  1|:|1451619638.903|0.806||8|0|0|echo foo baz|foo|baz|foo baz
  |
  2|:|1451619639.265|1.54||9|0|0|echo foo quuz|foo|quuz|foo quuz
  |
  3|:|1451619640.378|1.43||8|0|0|echo bar baz|bar|baz|bar baz
  |
  4|:|1451619641.473|0.958||9|0|0|echo bar quuz|bar|quuz|bar quuz
  |

The first columns are well known from B<--joblog>. B<V1> and B<V2> are
data from the input sources. B<Stdout> and B<Stderr> are standard
output and standard error, respectively.

=head2 Using multiple workers

Using an SQL base as storage costs overhead in the order of 1 second
per job.

One of the situations where it makes sense is if you have multiple
workers.

You can then have a single master machine that submits jobs to the SQL
base (but does not do any of the work):

  parallel --sqlmaster $DBURLTABLE echo ::: foo bar ::: baz quuz

On the worker machines you run exactly the same command except you
replace B<--sqlmaster> with B<--sqlworker>.

  parallel --sqlworker $DBURLTABLE echo ::: foo bar ::: baz quuz

To run a master and a worker on the same machine use B<--sqlandworker>
as shown earlier.


=head1 --pipe

The B<--pipe> functionality puts GNU B<parallel> in a different mode:
Instead of treating the data on stdin (standard input) as arguments
for a command to run, the data will be sent to stdin (standard input)
of the command.

The typical situation is:

  command_A | command_B | command_C

where command_B is slow, and you want to speed up command_B.

=head2 Chunk size

By default GNU B<parallel> will start an instance of command_B, read a
chunk of 1 MB, and pass that to the instance. Then start another
instance, read another chunk, and pass that to the second instance.

  cat num1000000 | parallel --pipe wc

Output (the order may be different):

  165668  165668 1048571
  149797  149797 1048579
  149796  149796 1048572
  149797  149797 1048579
  149797  149797 1048579
  149796  149796 1048572
   85349   85349  597444

The size of the chunk is not exactly 1 MB because GNU B<parallel> only
passes full lines - never half a line, thus the blocksize is only
1 MB on average. You can change the block size to 2 MB with B<--block>:

  cat num1000000 | parallel --pipe --block 2M wc

Output (the order may be different):

  315465  315465 2097150
  299593  299593 2097151
  299593  299593 2097151
   85349   85349  597444

GNU B<parallel> treats each line as a record. If the order of records
is unimportant (e.g. you need all lines processed, but you do not care
which is processed first), then you can use B<--roundrobin>. Without
B<--roundrobin> GNU B<parallel> will start a command per block; with
B<--roundrobin> only the requested number of jobs will be started
(B<--jobs>). The records will then be distributed between the running
jobs:

  cat num1000000 | parallel --pipe -j4 --roundrobin wc

Output will be similar to:

  149797  149797 1048579
  299593  299593 2097151
  315465  315465 2097150
  235145  235145 1646016

One of the 4 instances got a single record, 2 instances got 2 full
records each, and one instance got 1 full and 1 partial record.

=head2 Records

GNU B<parallel> sees the input as records. The default record is a single
line.

Using B<-N140000> GNU B<parallel> will read 140000 records at a time:

  cat num1000000 | parallel --pipe -N140000 wc

Output (the order may be different):

  140000  140000  868895
  140000  140000  980000
  140000  140000  980000
  140000  140000  980000
  140000  140000  980000
  140000  140000  980000
  140000  140000  980000
   20000   20000  140001

Note how that the last job could not get the full 140000 lines, but
only 20000 lines.

If a record is 75 lines B<-L> can be used:

  cat num1000000 | parallel --pipe -L75 wc

Output (the order may be different):

  165600  165600 1048095
  149850  149850 1048950
  149775  149775 1048425
  149775  149775 1048425
  149850  149850 1048950
  149775  149775 1048425
   85350   85350  597450
      25      25     176

Note how GNU B<parallel> still reads a block of around 1 MB; but
instead of passing full lines to B<wc> it passes full 75 lines at a
time. This of course does not hold for the last job (which in this
case got 25 lines).

=head2 Fixed length records

Fixed length records can be processed by setting B<--recend ''> and
B<--block I<recordsize>>. A header of size I<n> can be processed with
B<--header .{I<n>}>.

Here is how to process a file with a 4-byte header and a 3-byte record
size:

  cat fixedlen | parallel --pipe --header .{4} --block 3 --recend '' \
    'echo start; cat; echo'

Output:

  start
  HHHHAAA
  start
  HHHHCCC
  start
  HHHHBBB

It may be more efficient to increase B<--block> to a multiplum of the
record size.

=head2 Record separators

GNU B<parallel> uses separators to determine where two records split.

B<--recstart> gives the string that starts a record; B<--recend> gives the
string that ends a record. The default is B<--recend '\n'> (newline).

If both B<--recend> and B<--recstart> are given, then the record will only
split if the recend string is immediately followed by the recstart
string.

Here the B<--recend> is set to B<', '>:

  echo /foo, bar/, /baz, qux/, | \
    parallel -kN1 --recend ', ' --pipe echo JOB{#}\;cat\;echo END

Output:

  JOB1
  /foo, END
  JOB2
  bar/, END
  JOB3
  /baz, END
  JOB4
  qux/,
  END

Here the B<--recstart> is set to B</>:

  echo /foo, bar/, /baz, qux/, | \
    parallel -kN1 --recstart / --pipe echo JOB{#}\;cat\;echo END

Output:

  JOB1
  /foo, barEND
  JOB2
  /, END
  JOB3
  /baz, quxEND
  JOB4
  /,
  END

Here both B<--recend> and B<--recstart> are set:

  echo /foo, bar/, /baz, qux/, | \
    parallel -kN1 --recend ', ' --recstart / --pipe \
    echo JOB{#}\;cat\;echo END

Output:

  JOB1
  /foo, bar/, END
  JOB2
  /baz, qux/,
  END

Note the difference between setting one string and setting both strings.

With B<--regexp> the B<--recend> and B<--recstart> will be treated as
a regular expression:

  echo foo,bar,_baz,__qux, | \
    parallel -kN1 --regexp --recend ,_+ --pipe \
    echo JOB{#}\;cat\;echo END

Output:

  JOB1
  foo,bar,_END
  JOB2
  baz,__END
  JOB3
  qux,
  END

GNU B<parallel> can remove the record separators with
B<--remove-rec-sep>/B<--rrs>:

  echo foo,bar,_baz,__qux, | \
    parallel -kN1 --rrs --regexp --recend ,_+ --pipe \
    echo JOB{#}\;cat\;echo END

Output:

  JOB1
  foo,barEND
  JOB2
  bazEND
  JOB3
  qux,
  END

=head2 Header

If the input data has a header, the header can be repeated for each
job by matching the header with B<--header>. If headers start with
B<%> you can do this:

  cat num_%header | \
    parallel --header '(%.*\n)*' --pipe -N3 echo JOB{#}\;cat

Output (the order may be different):

  JOB1
  %head1
  %head2
  1
  2
  3
  JOB2
  %head1
  %head2
  4
  5
  6
  JOB3
  %head1
  %head2
  7
  8
  9
  JOB4
  %head1
  %head2
  10

If the header is 2 lines, B<--header> 2 will work:

  cat num_%header | parallel --header 2 --pipe -N3 echo JOB{#}\;cat

Output: Same as above.

=head2 --pipepart

B<--pipe> is not very efficient. It maxes out at around 500
MB/s. B<--pipepart> can easily deliver 5 GB/s. But there are a few
limitations. The input has to be a normal file (not a pipe) given by
B<-a> or B<::::> and B<-L>/B<-l>/B<-N> do not work. B<--recend> and
B<--recstart>, however, I<do> work, and records can often be split on
that alone.

  parallel --pipepart -a num1000000 --block 3m wc

Output (the order may be different):

 444443  444444 3000002
 428572  428572 3000004
 126985  126984  888890


=head1 Shebang

=head2 Input data and parallel command in the same file

GNU B<parallel> is often called as this:

  cat input_file | parallel command

With B<--shebang> the I<input_file> and B<parallel> can be combined into the same script.

UNIX shell scripts start with a shebang line like this:

  #!/bin/bash

GNU B<parallel> can do that, too. With B<--shebang> the arguments can be
listed in the file. The B<parallel> command is the first line of the
script:

  #!/usr/bin/parallel --shebang -r echo

  foo
  bar
  baz

Output (the order may be different):

  foo
  bar
  baz

=head2 Parallelizing existing scripts

GNU B<parallel> is often called as this:

  cat input_file | parallel command
  parallel command ::: foo bar

If B<command> is a script, B<parallel> can be combined into a single
file so this will run the script in parallel:

  cat input_file | command
  command foo bar

This B<perl> script B<perl_echo> works like B<echo>:

  #!/usr/bin/perl

  print "@ARGV\n"

It can be called as this:

  parallel perl_echo ::: foo bar

By changing the B<#!>-line it can be run in parallel:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/perl

  print "@ARGV\n"

Thus this will work:

  perl_echo foo bar

Output (the order may be different):

  foo
  bar

This technique can be used for:

=over 9

=item Perl:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/perl
  
  print "Arguments @ARGV\n";


=item Python:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/python
  
  import sys
  print 'Arguments', str(sys.argv)


=item Bash/sh/zsh/Korn shell:

  #!/usr/bin/parallel --shebang-wrap /bin/bash
  
  echo Arguments "$@"


=item csh:

  #!/usr/bin/parallel --shebang-wrap /bin/csh
  
  echo Arguments "$argv"


=item Tcl:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/tclsh
  
  puts "Arguments $argv"


=item R:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/Rscript --vanilla --slave
  
  args <- commandArgs(trailingOnly = TRUE)
  print(paste("Arguments ",args))


=item GNUplot:

  #!/usr/bin/parallel --shebang-wrap ARG={} /usr/bin/gnuplot
  
  print "Arguments ", system('echo $ARG')


=item Ruby:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/ruby
  
  print "Arguments "
  puts ARGV


=item Octave:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/octave
  
  printf ("Arguments");
  arg_list = argv ();
  for i = 1:nargin
    printf (" %s", arg_list{i});
  endfor
  printf ("\n");

=item Common LISP:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/clisp
  
  (format t "~&~S~&" 'Arguments)
  (format t "~&~S~&" *args*)

=item PHP:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/php
  <?php
  echo "Arguments";
  foreach(array_slice($argv,1) as $v)
  {
    echo " $v";
  }
  echo "\n";
  ?>

=item Node.js:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/node

  var myArgs = process.argv.slice(2);
  console.log('Arguments ', myArgs);

=item LUA:

  #!/usr/bin/parallel --shebang-wrap /usr/bin/lua
  
  io.write "Arguments"
  for a = 1, #arg do
    io.write(" ")
    io.write(arg[a])
  end
  print("")

=item C#:

  #!/usr/bin/parallel --shebang-wrap ARGV={} /usr/bin/csharp
  
  var argv = Environment.GetEnvironmentVariable("ARGV");
  print("Arguments "+argv);

=back

=head1 Semaphore

GNU B<parallel> can work as a counting semaphore. This is slower and less
efficient than its normal mode.

A counting semaphore is like a row of toilets. People needing a toilet
can use any toilet, but if there are more people than toilets, they
will have to wait for one of the toilets to become available.

An alias for B<parallel --semaphore> is B<sem>.

B<sem> will follow a person to the toilets, wait until a toilet is
available, leave the person in the toilet and exit.

B<sem --fg> will follow a person to the toilets, wait until a toilet is
available, stay with the person in the toilet and exit when the person
exits.

B<sem --wait> will wait for all persons to leave the toilets.

B<sem> does not have a queue discipline, so the next person is chosen
randomly.

B<-j> sets the number of toilets.

=head2 Mutex

The default is to have only one toilet (this is called a mutex). The
program is started in the background and B<sem> exits immediately. Use
B<--wait> to wait for all B<sem>s to finish:

  sem 'sleep 1; echo The first finished' &&
    echo The first is now running in the background &&
    sem 'sleep 1; echo The second finished' &&
    echo The second is now running in the background
  sem --wait

Output:

  The first is now running in the background
  The first finished
  The second is now running in the background
  The second finished

The command can be run in the foreground with B<--fg>, which will only
exit when the command completes:

  sem --fg 'sleep 1; echo The first finished' &&
    echo The first finished running in the foreground &&
    sem --fg 'sleep 1; echo The second finished' &&
    echo The second finished running in the foreground
  sem --wait

The difference between this and just running the command, is that a
mutex is set, so if other B<sem>s were running in the background only one
would run at a time.

To control which semaphore is used, use
B<--semaphorename>/B<--id>. Run this in one terminal:

  sem --id my_id -u 'echo First started; sleep 10; echo First done'

and simultaneously this in another terminal:

  sem --id my_id -u 'echo Second started; sleep 10; echo Second done'

Note how the second will only be started when the first has finished.

=head2 Counting semaphore

A mutex is like having a single toilet: When it is in use everyone
else will have to wait. A counting semaphore is like having multiple
toilets: Several people can use the toilets, but when they all are in
use, everyone else will have to wait.

B<sem> can emulate a counting semaphore. Use B<--jobs> to set the
number of toilets like this:

  sem --jobs 3 --id my_id -u 'echo Start 1; sleep 5; echo 1 done' &&
  sem --jobs 3 --id my_id -u 'echo Start 2; sleep 6; echo 2 done' &&
  sem --jobs 3 --id my_id -u 'echo Start 3; sleep 7; echo 3 done' &&
  sem --jobs 3 --id my_id -u 'echo Start 4; sleep 8; echo 4 done' &&
  sem --wait --id my_id

Output:

  Start 1
  Start 2
  Start 3
  1 done
  Start 4
  2 done
  3 done
  4 done

=head2 Timeout

With B<--semaphoretimeout> you can force running the command anyway after
a period (positive number) or give up (negative number):

  sem --id foo -u 'echo Slow started; sleep 5; echo Slow ended' &&
  sem --id foo --semaphoretimeout 1 'echo Forced running after 1 sec' &&
  sem --id foo --semaphoretimeout -2 'echo Give up after 2 secs'
  sem --id foo --wait

Output:

  Slow started
  parallel: Warning: Semaphore timed out. Stealing the semaphore.
  Forced running after 1 sec
  parallel: Warning: Semaphore timed out. Exiting.
  Slow ended

Note how the 'Give up' was not run.

=head1 Informational

GNU B<parallel> has some options to give short information about the
configuration.

B<--help> will print a summary of the most important options:

  parallel --help

Output:

  Usage:
  
  parallel [options] [command [arguments]] < list_of_arguments
  parallel [options] [command [arguments]] (::: arguments|:::: argfile(s))...
  cat ... | parallel --pipe [options] [command [arguments]]
  
  -j n            Run n jobs in parallel
  -k              Keep same order
  -X              Multiple arguments with context replace
  --colsep regexp Split input on regexp for positional replacements
  {} {.} {/} {/.} {#} {%} {= perl code =} Replacement strings
  {3} {3.} {3/} {3/.} {=3 perl code =}    Positional replacement strings
  With --plus:    {} = {+/}/{/} = {.}.{+.} = {+/}/{/.}.{+.} = {..}.{+..} =
                  {+/}/{/..}.{+..} = {...}.{+...} = {+/}/{/...}.{+...}
  
  -S sshlogin     Example: foo@server.example.com
  --slf ..        Use ~/.parallel/sshloginfile as the list of sshlogins
  --trc {}.bar    Shorthand for --transfer --return {}.bar --cleanup
  --onall         Run the given command with argument on all sshlogins
  --nonall        Run the given command with no arguments on all sshlogins
  
  --pipe          Split stdin (standard input) to multiple jobs.
  --recend str    Record end separator for --pipe.
  --recstart str  Record start separator for --pipe.
  
  See 'man parallel' for details
  
  Academic tradition requires you to cite works you base your article on.
  When using programs that use GNU Parallel to process data for publication
  please cite:
  
    O. Tange (2011): GNU Parallel - The Command-Line Power Tool,
    ;login: The USENIX Magazine, February 2011:42-47.
  
  This helps funding further development; AND IT WON'T COST YOU A CENT.
  If you pay 10000 EUR you should feel free to use GNU Parallel without citing.

When asking for help, always report the full output of this:

  parallel --version

Output:

  GNU parallel 20230122
  Copyright (C) 2007-2024 Ole Tange, http://ole.tange.dk and Free Software
  Foundation, Inc.
  License GPLv3+: GNU GPL version 3 or later <https://gnu.org/licenses/gpl.html>
  This is free software: you are free to change and redistribute it.
  GNU parallel comes with no warranty.
  
  Web site: https://www.gnu.org/software/parallel
  
  When using programs that use GNU Parallel to process data for publication
  please cite as described in 'parallel --citation'.

In scripts B<--minversion> can be used to ensure the user has at least
this version:

  parallel --minversion 20130722 && \
    echo Your version is at least 20130722.

Output:

  20160322
  Your version is at least 20130722.

If you are using GNU B<parallel> for research the BibTeX citation can be
generated using B<--citation>:

  parallel --citation

Output:

  Academic tradition requires you to cite works you base your article on.
  When using programs that use GNU Parallel to process data for publication
  please cite:
  
  @article{Tange2011a,
    title = {GNU Parallel - The Command-Line Power Tool},
    author = {O. Tange},
    address = {Frederiksberg, Denmark},
    journal = {;login: The USENIX Magazine},
    month = {Feb},
    number = {1},
    volume = {36},
    url = {https://www.gnu.org/s/parallel},
    year = {2011},
    pages = {42-47},
    doi = {10.5281/zenodo.16303}
  }
  
  (Feel free to use \nocite{Tange2011a})
  
  This helps funding further development; AND IT WON'T COST YOU A CENT.
  If you pay 10000 EUR you should feel free to use GNU Parallel without citing.
  
  If you send a copy of your published article to tange@gnu.org, it will be
  mentioned in the release notes of next version of GNU Parallel.
  
With B<--max-line-length-allowed> GNU B<parallel> will report the maximal
size of the command line:

  parallel --max-line-length-allowed

Output (may vary on different systems):

  131071

B<--number-of-cpus> and B<--number-of-cores> run system specific code to
determine the number of CPUs and CPU cores on the system. On
unsupported platforms they will return 1:

  parallel --number-of-cpus
  parallel --number-of-cores

Output (may vary on different systems):

  4
  64

=head1 Profiles

The defaults for GNU B<parallel> can be changed systemwide by putting the
command line options in B</etc/parallel/config>. They can be changed for
a user by putting them in B<~/.parallel/config>.

Profiles work the same way, but have to be referred to with B<--profile>:

  echo '--nice 17' > ~/.parallel/nicetimeout
  echo '--timeout 300%' >> ~/.parallel/nicetimeout
  parallel --profile nicetimeout echo ::: A B C

Output:

  A
  B
  C

Profiles can be combined:

  echo '-vv --dry-run' > ~/.parallel/dryverbose
  parallel --profile dryverbose --profile nicetimeout echo ::: A B C

Output:

  echo A
  echo B
  echo C


=head1 Spread the word

I hope you have learned something from this tutorial.

If you like GNU B<parallel>:

=over 2

=item *

(Re-)walk through the tutorial if you have not done so in the past year
(https://www.gnu.org/software/parallel/parallel_tutorial.html)

=item *

Give a demo at your local user group/your team/your colleagues

=item *

Post the intro videos and the tutorial on Reddit, Mastodon, Diaspora*,
forums, blogs, Identi.ca, Google+, Twitter, Facebook, Linkedin, and
mailing lists

=item *

Request or write a review for your favourite blog or magazine
(especially if you do something cool with GNU B<parallel>)

=item *

Invite me for your next conference

=back

If you use GNU B<parallel> for research:

=over 2

=item *

Please cite GNU B<parallel> in you publications (use B<--citation>)

=back

If GNU B<parallel> saves you money:

=over 2

=item *

(Have your company) donate to FSF or become a member
https://my.fsf.org/donate/

=back

(C) 2013-2024 Ole Tange, GFDLv1.3+ (See
LICENSES/GFDL-1.3-or-later.txt)


=cut