1 files changed, 148 insertions, 0 deletions
diff --git a/doc/plzip.1 b/doc/plzip.1
new file mode 100644
index 0000000..3985e5b
--- /dev/null
+++ b/doc/plzip.1
@@ -0,0 +1,148 @@
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.49.2.
+.TH PLZIP "1" "January 2024" "plzip 1.11" "User Commands"
+.SH NAME
+plzip \- reduces the size of files
+.SH SYNOPSIS
+.B plzip
+[\fI\,options\/\fR] [\fI\,files\/\fR]
+.SH DESCRIPTION
+Plzip is a massively parallel (multi\-threaded) implementation of lzip,
+compatible with lzip 1.4 or newer. Plzip uses the compression library lzlib.
+.PP
+Lzip is a lossless data compressor with a user interface similar to the one
+of gzip or bzip2. Lzip uses a simplified form of the 'Lempel\-Ziv\-Markov
+chain\-Algorithm' (LZMA) stream format to maximize interoperability. The
+maximum dictionary size is 512 MiB so that any lzip file can be decompressed
+on 32\-bit machines. Lzip provides accurate and robust 3\-factor integrity
+checking. Lzip can compress about as fast as gzip (lzip \fB\-0\fR) or compress most
+files more than bzip2 (lzip \fB\-9\fR). Decompression speed is intermediate between
+gzip and bzip2. Lzip is better than gzip and bzip2 from a data recovery
+perspective. Lzip has been designed, written, and tested with great care to
+replace gzip and bzip2 as the standard general\-purpose compressed format for
+Unix\-like systems.
+.PP
+Plzip can compress/decompress large files on multiprocessor machines much
+faster than lzip, at the cost of a slightly reduced compression ratio (0.4
+to 2 percent larger compressed files). Note that the number of usable
+threads is limited by file size; on files larger than a few GB plzip can use
+hundreds of processors, but on files of only a few MB plzip is no faster
+than lzip.
+.SH OPTIONS
+.TP
+\fB\-h\fR, \fB\-\-help\fR
+display this help and exit
+.TP
+\fB\-V\fR, \fB\-\-version\fR
+output version information and exit
+.TP
+\fB\-a\fR, \fB\-\-trailing\-error\fR
+exit with error status if trailing data
+.TP
+\fB\-B\fR, \fB\-\-data\-size=\fR<bytes>
+set size of input data blocks [2x8=16 MiB]
+.TP
+\fB\-c\fR, \fB\-\-stdout\fR
+write to standard output, keep input files
+.TP
+\fB\-d\fR, \fB\-\-decompress\fR
+decompress, test compressed file integrity
+.TP
+\fB\-f\fR, \fB\-\-force\fR
+overwrite existing output files
+.TP
+\fB\-F\fR, \fB\-\-recompress\fR
+force re\-compression of compressed files
+.TP
+\fB\-k\fR, \fB\-\-keep\fR
+keep (don't delete) input files
+.TP
+\fB\-l\fR, \fB\-\-list\fR
+print (un)compressed file sizes
+.TP
+\fB\-m\fR, \fB\-\-match\-length=\fR<bytes>
+set match length limit in bytes [36]
+.TP
+\fB\-n\fR, \fB\-\-threads=\fR<n>
+set number of (de)compression threads [2]
+.TP
+\fB\-o\fR, \fB\-\-output=\fR<file>
+write to <file>, keep input files
+.TP
+\fB\-q\fR, \fB\-\-quiet\fR
+suppress all messages
+.TP
+\fB\-s\fR, \fB\-\-dictionary\-size=\fR<bytes>
+set dictionary size limit in bytes [8 MiB]
+.TP
+\fB\-t\fR, \fB\-\-test\fR
+test compressed file integrity
+.TP
+\fB\-v\fR, \fB\-\-verbose\fR
+be verbose (a 2nd \fB\-v\fR gives more)
+.TP
+\fB\-0\fR .. \fB\-9\fR
+set compression level [default 6]
+.TP
+\fB\-\-fast\fR
+alias for \fB\-0\fR
+.TP
+\fB\-\-best\fR
+alias for \fB\-9\fR
+.TP
+\fB\-\-loose\-trailing\fR
+allow trailing data seeming corrupt header
+.TP
+\fB\-\-in\-slots=\fR<n>
+number of 1 MiB input packets buffered [4]
+.TP
+\fB\-\-out\-slots=\fR<n>
+number of 1 MiB output packets buffered [64]
+.TP
+\fB\-\-check\-lib\fR
+compare version of lzlib.h with liblz.{a,so}
+.PP
+If no file names are given, or if a file is '\-', plzip compresses or
+decompresses from standard input to standard output.
+Numbers may be followed by a multiplier: k = kB = 10^3 = 1000,
+Ki = KiB = 2^10 = 1024, M = 10^6, Mi = 2^20, G = 10^9, Gi = 2^30, etc...
+Dictionary sizes 12 to 29 are interpreted as powers of two, meaning 2^12 to
+2^29 bytes.
+.PP
+The bidimensional parameter space of LZMA can't be mapped to a linear scale
+optimal for all files. If your files are large, very repetitive, etc, you
+may need to use the options \fB\-\-dictionary\-size\fR and \fB\-\-match\-length\fR directly
+to achieve optimal performance.
+.PP
+To extract all the files from archive 'foo.tar.lz', use the commands
+\&'tar \fB\-xf\fR foo.tar.lz' or 'plzip \fB\-cd\fR foo.tar.lz | tar \fB\-xf\fR \-'.
+.PP
+Exit status: 0 for a normal exit, 1 for environmental problems
+(file not found, invalid command\-line options, I/O errors, etc), 2 to
+indicate a corrupt or invalid input file, 3 for an internal consistency
+error (e.g., bug) which caused plzip to panic.
+.SH "REPORTING BUGS"
+Report bugs to lzip\-bug@nongnu.org
+.br
+Plzip home page: http://www.nongnu.org/lzip/plzip.html
+.SH COPYRIGHT
+Copyright \(co 2009 Laszlo Ersek.
+.br
+Copyright \(co 2024 Antonio Diaz Diaz.
+License GPLv2+: GNU GPL version 2 or later <http://gnu.org/licenses/gpl.html>
+.br
+This is free software: you are free to change and redistribute it.
+There is NO WARRANTY, to the extent permitted by law.
+Using lzlib 1.14
+Using LZ_API_VERSION = 1014
+.SH "SEE ALSO"
+The full documentation for
+.B plzip
+is maintained as a Texinfo manual.  If the
+.B info
+and
+.B plzip
+programs are properly installed at your site, the command
+.IP
+.B info plzip
+.PP
+should give you access to the complete manual.