Adding upstream version 3.8.5.upstream/3.8.5

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 395 insertions, 0 deletions

diff --git a/src/cleanup/cleanup_api.c b/src/cleanup/cleanup_api.c
new file mode 100644
index 0000000..738bd73
--- /dev/null
+++ b/src/cleanup/cleanup_api.c
@@ -0,0 +1,395 @@
+/*++
+/* NAME
+/*	cleanup_api 3
+/* SUMMARY
+/*	cleanup callable interface, message processing
+/* SYNOPSIS
+/*	#include "cleanup.h"
+/*
+/*	CLEANUP_STATE *cleanup_open(src)
+/*	VSTREAM	*src;
+/*
+/*	void	cleanup_control(state, flags)
+/*	CLEANUP_STATE *state;
+/*	int	flags;
+/*
+/*	void	CLEANUP_RECORD(state, type, buf, len)
+/*	CLEANUP_STATE *state;
+/*	int	type;
+/*	char	*buf;
+/*	int	len;
+/*
+/*	int	cleanup_flush(state)
+/*	CLEANUP_STATE *state;
+/*
+/*	int	cleanup_free(state)
+/*	CLEANUP_STATE *state;
+/* DESCRIPTION
+/*	This module implements a callable interface to the cleanup service
+/*	for processing one message and for writing it to queue file.
+/*	For a description of the cleanup service, see cleanup(8).
+/*
+/*	cleanup_open() creates a new queue file and performs other
+/*	per-message initialization. The result is a handle that should be
+/*	given to the cleanup_control(), cleanup_record(), cleanup_flush()
+/*	and cleanup_free() routines. The name of the queue file is in the
+/*	queue_id result structure member.
+/*
+/*	cleanup_control() processes per-message flags specified by the caller.
+/*	These flags control the handling of data errors, and must be set
+/*	before processing the first message record.
+/* .IP CLEANUP_FLAG_BOUNCE
+/*	The cleanup server is responsible for returning undeliverable
+/*	mail (too many hops, message too large) to the sender.
+/* .IP CLEANUP_FLAG_BCC_OK
+/*	It is OK to add automatic BCC recipient addresses.
+/* .IP CLEANUP_FLAG_FILTER
+/*	Enable header/body filtering. This should be enabled only with mail
+/*	that enters Postfix, not with locally forwarded mail or with bounce
+/*	messages.
+/* .IP CLEANUP_FLAG_MILTER
+/*	Enable Milter applications. This should be enabled only with mail
+/*	that enters Postfix, not with locally forwarded mail or with bounce
+/*	messages.
+/* .IP CLEANUP_FLAG_MAP_OK
+/*	Enable canonical and virtual mapping, and address masquerading.
+/* .PP
+/*	For convenience the CLEANUP_FLAG_MASK_EXTERNAL macro specifies
+/*	the options that are normally needed for mail that enters
+/*	Postfix from outside, and CLEANUP_FLAG_MASK_INTERNAL specifies
+/*	the options that are normally needed for internally generated or
+/*	forwarded mail.
+/*
+/*	CLEANUP_RECORD() is a macro that processes one message record,
+/*	that copies the result to the queue file, and that maintains a
+/*	little state machine. The last record in a valid message has type
+/*	REC_TYPE_END.  In order to find out if a message is corrupted,
+/*	the caller is encouraged to test the CLEANUP_OUT_OK(state) macro.
+/*	The result is false when further message processing is futile.
+/*	In that case, it is safe to call cleanup_flush() immediately.
+/*
+/*	cleanup_flush() closes a queue file. In case of any errors,
+/*	the file is removed. The result value is non-zero in case of
+/*	problems. In some cases a human-readable text can be found in
+/*	the state->reason member. In all other cases, use cleanup_strerror()
+/*	to translate the result into human-readable text.
+/*
+/*	cleanup_free() destroys its argument.
+/* .IP CLEANUP_FLAG_SMTPUTF8
+/*	Request SMTPUTF8 support when delivering mail.
+/* .IP CLEANUP_FLAG_AUTOUTF8
+/*	Autodetection: request SMTPUTF8 support if the message
+/*	contains an UTF8 message header, sender, or recipient.
+/* DIAGNOSTICS
+/*	Problems and transactions are logged to \fBsyslogd\fR(8)
+/*	or \fBpostlogd\fR(8).
+/* SEE ALSO
+/*	cleanup(8) cleanup service description.
+/*	cleanup_init(8) cleanup callable interface, initialization
+/* LICENSE
+/* .ad
+/* .fi
+/*	The Secure Mailer license must be distributed with this software.
+/* AUTHOR(S)
+/*	Wietse Venema
+/*	IBM T.J. Watson Research
+/*	P.O. Box 704
+/*	Yorktown Heights, NY 10598, USA
+/*
+/*	Wietse Venema
+/*	Google, Inc.
+/*	111 8th Avenue
+/*	New York, NY 10011, USA
+/*--*/
+
+/* System library. */
+
+#include <sys_defs.h>
+#include <errno.h>
+
+/* Utility library. */
+
+#include <msg.h>
+#include <vstring.h>
+#include <mymalloc.h>
+
+/* Global library. */
+
+#include <cleanup_user.h>
+#include <mail_queue.h>
+#include <mail_proto.h>
+#include <bounce.h>
+#include <mail_params.h>
+#include <mail_stream.h>
+#include <mail_flow.h>
+#include <rec_type.h>
+#include <smtputf8.h>
+
+/* Milter library. */
+
+#include <milter.h>
+
+/* Application-specific. */
+
+#include "cleanup.h"
+
+/* cleanup_open - open queue file and initialize */
+
+CLEANUP_STATE *cleanup_open(VSTREAM *src)
+{
+    CLEANUP_STATE *state;
+    static const char *log_queues[] = {
+	MAIL_QUEUE_DEFER,
+	MAIL_QUEUE_BOUNCE,
+	MAIL_QUEUE_TRACE,
+	0,
+    };
+    const char **cpp;
+
+    /*
+     * Initialize private state.
+     */
+    state = cleanup_state_alloc(src);
+
+    /*
+     * Open the queue file. Save the queue file name in a global variable, so
+     * that the runtime error handler can clean up in case of problems.
+     * 
+     * XXX For now, a lot of detail is frozen that could be more useful if it
+     * were made configurable.
+     */
+    state->queue_name = mystrdup(MAIL_QUEUE_INCOMING);
+    state->handle = mail_stream_file(state->queue_name,
+				   MAIL_CLASS_PUBLIC, var_queue_service, 0);
+    state->dst = state->handle->stream;
+    cleanup_path = mystrdup(VSTREAM_PATH(state->dst));
+    state->queue_id = mystrdup(state->handle->id);
+    if (msg_verbose)
+	msg_info("cleanup_open: open %s", cleanup_path);
+
+    /*
+     * If there is a time to get rid of spurious log files, this is it. The
+     * down side is that this costs performance for every message, while the
+     * probability of spurious log files is quite low.
+     * 
+     * XXX The defer logfile is deleted when the message is moved into the
+     * active queue. We must also remove it now, otherwise mailq produces
+     * nonsense.
+     */
+    for (cpp = log_queues; *cpp; cpp++) {
+	if (mail_queue_remove(*cpp, state->queue_id) == 0)
+	    msg_warn("%s: removed spurious %s log", *cpp, state->queue_id);
+	else if (errno != ENOENT)
+	    msg_fatal("%s: remove %s log: %m", *cpp, state->queue_id);
+    }
+    return (state);
+}
+
+/* cleanup_control - process client options */
+
+void    cleanup_control(CLEANUP_STATE *state, int flags)
+{
+
+    /*
+     * If the client requests us to do the bouncing in case of problems,
+     * throw away the input only in case of real show-stopper errors, such as
+     * unrecognizable data (which should never happen) or insufficient space
+     * for the queue file (which will happen occasionally). Otherwise,
+     * discard input after any lethal error. See the CLEANUP_OUT_OK() macro
+     * definition.
+     */
+    if (msg_verbose)
+	msg_info("cleanup flags = %s", cleanup_strflags(flags));
+    if ((state->flags = flags) & CLEANUP_FLAG_BOUNCE) {
+	state->err_mask = CLEANUP_STAT_MASK_INCOMPLETE;
+    } else {
+	state->err_mask = ~0;
+    }
+    if (state->flags & CLEANUP_FLAG_SMTPUTF8)
+	state->smtputf8 = SMTPUTF8_FLAG_REQUESTED;
+}
+
+/* cleanup_flush - finish queue file */
+
+int     cleanup_flush(CLEANUP_STATE *state)
+{
+    int     status;
+    char   *junk;
+    VSTRING *trace_junk;
+
+    /*
+     * Raise these errors only if we examined all queue file records.
+     */
+    if (CLEANUP_OUT_OK(state)) {
+	if (state->recip == 0)
+	    state->errs |= CLEANUP_STAT_RCPT;
+	if ((state->flags & CLEANUP_FLAG_END_SEEN) == 0)
+	    state->errs |= CLEANUP_STAT_BAD;
+    }
+
+    /*
+     * Status sanitization. Always report success when the discard flag was
+     * raised by some user-specified access rule.
+     */
+    if (state->flags & CLEANUP_FLAG_DISCARD)
+	state->errs = 0;
+
+    /*
+     * Apply external mail filter.
+     * 
+     * XXX Include test for a built-in action to tempfail this message.
+     */
+    if (CLEANUP_MILTER_OK(state)) {
+	if (state->milters)
+	    cleanup_milter_inspect(state, state->milters);
+	else if (cleanup_milters) {
+	    cleanup_milter_emul_data(state, cleanup_milters);
+	    if (CLEANUP_MILTER_OK(state))
+		cleanup_milter_inspect(state, cleanup_milters);
+	}
+    }
+
+    /*
+     * Update the preliminary message size and count fields with the actual
+     * values.
+     */
+    if (CLEANUP_OUT_OK(state))
+	cleanup_final(state);
+
+    /*
+     * If there was an error that requires us to generate a bounce message
+     * (mail submitted with the Postfix sendmail command, mail forwarded by
+     * the local(8) delivery agent, or mail re-queued with "postsuper -r"),
+     * send a bounce notification, reset the error flags in case of success,
+     * and request deletion of the incoming queue file and of the
+     * optional DSN SUCCESS records from virtual alias expansion.
+     * 
+     * XXX It would make no sense to knowingly report success after we already
+     * have bounced all recipients, especially because the information in the
+     * DSN SUCCESS notice is completely redundant compared to the information
+     * in the bounce notice (however, both may be incomplete when the queue
+     * file size would exceed the safety limit).
+     * 
+     * An alternative is to keep the DSN SUCCESS records and to delegate bounce
+     * notification to the queue manager, just like we already delegate
+     * success notification. This requires that we leave the undeliverable
+     * message in the incoming queue; versions up to 20050726 did exactly
+     * that. Unfortunately, this broke with over-size queue files, because
+     * the queue manager cannot handle incomplete queue files (and it should
+     * not try to do so).
+     */
+#define CAN_BOUNCE() \
+	((state->errs & CLEANUP_STAT_MASK_CANT_BOUNCE) == 0 \
+	    && state->sender != 0 \
+	    && (state->flags & CLEANUP_FLAG_BOUNCE) != 0)
+
+    if (state->errs != 0 && CAN_BOUNCE())
+	cleanup_bounce(state);
+
+    /*
+     * Optionally, place the message on hold, but only if the message was
+     * received successfully and only if it's not being discarded for other
+     * reasons. This involves renaming the queue file before "finishing" it
+     * (or else the queue manager would grab it too early) and updating our
+     * own idea of the queue file name for error recovery and for error
+     * reporting purposes.
+     * 
+     * XXX Include test for a built-in action to tempfail this message.
+     */
+    if (state->errs == 0 && (state->flags & CLEANUP_FLAG_DISCARD) == 0) {
+	if ((state->flags & CLEANUP_FLAG_HOLD) != 0
+#ifdef DELAY_ACTION
+	    || state->defer_delay > 0
+#endif
+	    ) {
+	    myfree(state->queue_name);
+#ifdef DELAY_ACTION
+	    state->queue_name = mystrdup((state->flags & CLEANUP_FLAG_HOLD) ?
+				     MAIL_QUEUE_HOLD : MAIL_QUEUE_DEFERRED);
+#else
+	    state->queue_name = mystrdup(MAIL_QUEUE_HOLD);
+#endif
+	    mail_stream_ctl(state->handle,
+			    CA_MAIL_STREAM_CTL_QUEUE(state->queue_name),
+			    CA_MAIL_STREAM_CTL_CLASS((char *) 0),
+			    CA_MAIL_STREAM_CTL_SERVICE((char *) 0),
+#ifdef DELAY_ACTION
+			    CA_MAIL_STREAM_CTL_DELAY(state->defer_delay),
+#endif
+			    CA_MAIL_STREAM_CTL_END);
+	    junk = cleanup_path;
+	    cleanup_path = mystrdup(VSTREAM_PATH(state->handle->stream));
+	    myfree(junk);
+
+	    /*
+	     * XXX: When delivering to a non-incoming queue, do not consume
+	     * in_flow tokens. Unfortunately we can't move the code that
+	     * consumes tokens until after the mail is received, because that
+	     * would increase the risk of duplicate deliveries (RFC 1047).
+	     */
+	    (void) mail_flow_put(1);
+	}
+	state->errs = mail_stream_finish(state->handle, (VSTRING *) 0);
+    } else {
+
+	/*
+	 * XXX: When discarding mail, should we consume in_flow tokens? See
+	 * also the comments above for mail that is placed on hold.
+	 */
+#if 0
+	(void) mail_flow_put(1);
+#endif
+	mail_stream_cleanup(state->handle);
+    }
+    state->handle = 0;
+    state->dst = 0;
+
+    /*
+     * If there was an error, or if the message must be discarded for other
+     * reasons, remove the queue file and the optional trace file with DSN
+     * SUCCESS records from virtual alias expansion.
+     */
+    if (state->errs != 0 || (state->flags & CLEANUP_FLAG_DISCARD) != 0) {
+	if (cleanup_trace_path)
+	    (void) REMOVE(vstring_str(cleanup_trace_path));
+	if (REMOVE(cleanup_path))
+	    msg_warn("remove %s: %m", cleanup_path);
+    }
+
+    /*
+     * Make sure that our queue file will not be deleted by the error handler
+     * AFTER we have taken responsibility for delivery. Better to deliver
+     * twice than to lose mail.
+     */
+    trace_junk = cleanup_trace_path;
+    cleanup_trace_path = 0;			/* don't delete upon error */
+    junk = cleanup_path;
+    cleanup_path = 0;				/* don't delete upon error */
+
+    if (trace_junk)
+	vstring_free(trace_junk);
+    myfree(junk);
+
+    /*
+     * Cleanup internal state. This is simply complementary to the
+     * initializations at the beginning of cleanup_open().
+     */
+    if (msg_verbose)
+	msg_info("cleanup_flush: status %d", state->errs);
+    status = state->errs;
+    return (status);
+}
+
+/* cleanup_free - pay the last respects */
+
+void    cleanup_free(CLEANUP_STATE *state)
+{
+
+    /*
+     * Emulate disconnect event. CLEANUP_FLAG_MILTER may be turned off after
+     * we have started.
+     */
+    if (cleanup_milters != 0 && state->milters == 0)
+	milter_disc_event(cleanup_milters);
+    cleanup_state_free(state);
+}