summaryrefslogtreecommitdiffstats
path: root/README_FILES/QSHAPE_README
diff options
context:
space:
mode:
Diffstat (limited to 'README_FILES/QSHAPE_README')
-rw-r--r--README_FILES/QSHAPE_README741
1 files changed, 741 insertions, 0 deletions
diff --git a/README_FILES/QSHAPE_README b/README_FILES/QSHAPE_README
new file mode 100644
index 0000000..28c2386
--- /dev/null
+++ b/README_FILES/QSHAPE_README
@@ -0,0 +1,741 @@
+PPoossttffiixx BBoottttlleenneecckk AAnnaallyyssiiss
+
+-------------------------------------------------------------------------------
+
+PPuurrppoossee ooff tthhiiss ddooccuummeenntt
+
+This document is an introduction to Postfix queue congestion analysis. It
+explains how the qshape(1) program can help to track down the reason for queue
+congestion. qshape(1) is bundled with Postfix 2.1 and later source code, under
+the "auxiliary" directory. This document describes qshape(1) as bundled with
+Postfix 2.4.
+
+This document covers the following topics:
+
+ * Introducing the qshape tool
+ * Trouble shooting with qshape
+ * Example 1: Healthy queue
+ * Example 2: Deferred queue full of dictionary attack bounces
+ * Example 3: Congestion in the active queue
+ * Example 4: High volume destination backlog
+ * Postfix queue directories
+
+ o The "maildrop" queue
+ o The "hold" queue
+ o The "incoming" queue
+ o The "active" queue
+ o The "deferred" queue
+
+ * Credits
+
+IInnttrroodduucciinngg tthhee qqsshhaappee ttooooll
+
+When mail is draining slowly or the queue is unexpectedly large, run qshape(1)
+as the super-user (root) to help zero in on the problem. The qshape(1) program
+displays a tabular view of the Postfix queue contents.
+
+ * On the horizontal axis, it displays the queue age with fine granularity for
+ recent messages and (geometrically) less fine granularity for older
+ messages.
+
+ * The vertical axis displays the destination (or with the "-s" switch the
+ sender) domain. Domains with the most messages are listed first.
+
+For example, in the output below we see the top 10 lines of the (mostly forged)
+sender domain distribution for captured spam in the "hold" queue:
+
+ $ qshape -s hold | head
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 486 0 0 1 0 0 2 4 20 40 419
+ yahoo.com 14 0 0 1 0 0 0 0 1 0 12
+ extremepricecuts.net 13 0 0 0 0 0 0 0 2 0 11
+ ms35.hinet.net 12 0 0 0 0 0 0 0 0 1 11
+ winnersdaily.net 12 0 0 0 0 0 0 0 2 0 10
+ hotmail.com 11 0 0 0 0 0 0 0 0 1 10
+ worldnet.fr 6 0 0 0 0 0 0 0 0 0 6
+ ms41.hinet.net 6 0 0 0 0 0 0 0 0 0 6
+ osn.de 5 0 0 0 0 0 1 0 0 0 4
+
+ * The "T" column shows the total (in this case sender) count for each domain.
+ The columns with numbers above them, show counts for messages aged fewer
+ than that many minutes, but not younger than the age limit for the previous
+ column. The row labeled "TOTAL" shows the total count for all domains.
+
+ * In this example, there are 14 messages allegedly from yahoo.com, 1 between
+ 10 and 20 minutes old, 1 between 320 and 640 minutes old and 12 older than
+ 1280 minutes (1440 minutes in a day).
+
+When the output is a terminal intermediate results showing the top 20 domains
+(-n option) are displayed after every 1000 messages (-N option) and the final
+output also shows only the top 20 domains. This makes qshape useful even when
+the "deferred" queue is very large and it may otherwise take prohibitively long
+to read the entire "deferred" queue.
+
+By default, qshape shows statistics for the union of both the "incoming" and
+"active" queues which are the most relevant queues to look at when analyzing
+performance.
+
+One can request an alternate list of queues:
+
+ $ qshape deferred
+ $ qshape incoming active deferred
+
+this will show the age distribution of the "deferred" queue or the union of the
+"incoming", "active" and "deferred" queues.
+
+Command line options control the number of display "buckets", the age limit for
+the smallest bucket, display of parent domain counts and so on. The "-h" option
+outputs a summary of the available switches.
+
+TTrroouubbllee sshhoooottiinngg wwiitthh qqsshhaappee
+
+Large numbers in the qshape output represent a large number of messages that
+are destined to (or alleged to come from) a particular domain. It should be
+possible to tell at a glance which domains dominate the queue sender or
+recipient counts, approximately when a burst of mail started, and when it
+stopped.
+
+The problem destinations or sender domains appear near the top left corner of
+the output table. Remember that the "active" queue can accommodate up to 20000
+($qmgr_message_active_limit) messages. To check whether this limit has been
+reached, use:
+
+ $ qshape -s active (show sender statistics)
+
+If the total sender count is below 20000 the "active" queue is not yet
+saturated, any high volume sender domains show near the top of the output.
+
+With oqmgr(8) the "active" queue is also limited to at most 20000 recipient
+addresses ($qmgr_message_recipient_limit). To check for exhaustion of this
+limit use:
+
+ $ qshape active (show recipient statistics)
+
+Having found the high volume domains, it is often useful to search the logs for
+recent messages pertaining to the domains in question.
+
+ # Find deliveries to example.com
+ #
+ $ tail -10000 /var/log/maillog |
+ grep -E -i ': to=<.*@example\.com>,' |
+ less
+
+ # Find messages from example.com
+ #
+ $ tail -10000 /var/log/maillog |
+ grep -E -i ': from=<.*@example\.com>,' |
+ less
+
+You may want to drill in on some specific queue ids:
+
+ # Find all messages for a specific queue id.
+ #
+ $ tail -10000 /var/log/maillog | grep -E ': 2B2173FF68: '
+
+Also look for queue manager warning messages in the log. These warnings can
+suggest strategies to reduce congestion.
+
+ $ grep -E 'qmgr.*(panic|fatal|error|warning):' /var/log/maillog
+
+When all else fails try the Postfix mailing list for help, but please don't
+forget to include the top 10 or 20 lines of qshape(1) output.
+
+EExxaammppllee 11:: HHeeaalltthhyy qquueeuuee
+
+When looking at just the "incoming" and "active" queues, under normal
+conditions (no congestion) the "incoming" and "active" queues are nearly empty.
+Mail leaves the system almost as quickly as it comes in or is deferred without
+congestion in the "active" queue.
+
+ $ qshape (show "incoming" and "active" queue status)
+
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 5 0 0 0 1 0 0 0 1 1 2
+ meri.uwasa.fi 5 0 0 0 1 0 0 0 1 1 2
+
+If one looks at the two queues separately, the "incoming" queue is empty or
+perhaps briefly has one or two messages, while the "active" queue holds more
+messages and for a somewhat longer time:
+
+ $ qshape incoming
+
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 0 0 0 0 0 0 0 0 0 0 0
+
+ $ qshape active
+
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 5 0 0 0 1 0 0 0 1 1 2
+ meri.uwasa.fi 5 0 0 0 1 0 0 0 1 1 2
+
+EExxaammppllee 22:: DDeeffeerrrreedd qquueeuuee ffuullll ooff ddiiccttiioonnaarryy aattttaacckk bboouunncceess
+
+This is from a server where recipient validation is not yet available for some
+of the hosted domains. Dictionary attacks on the unvalidated domains result in
+bounce backscatter. The bounces dominate the queue, but with proper tuning they
+do not saturate the "incoming" or "active" queues. The high volume of deferred
+mail is not a direct cause for alarm.
+
+ $ qshape deferred | head
+
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 2234 4 2 5 9 31 57 108 201 464 1353
+ heyhihellothere.com 207 0 0 1 1 6 6 8 25 68 92
+ pleazerzoneprod.com 105 0 0 0 0 0 0 0 5 44 56
+ groups.msn.com 63 2 1 2 4 4 14 14 14 8 0
+ orion.toppoint.de 49 0 0 0 1 0 2 4 3 16 23
+ kali.com.cn 46 0 0 0 0 1 0 2 6 12 25
+ meri.uwasa.fi 44 0 0 0 0 1 0 2 8 11 22
+ gjr.paknet.com.pk 43 1 0 0 1 1 3 3 6 12 16
+ aristotle.algonet.se 41 0 0 0 0 0 1 2 11 12 15
+
+The domains shown are mostly bulk-mailers and all the volume is the tail end of
+the time distribution, showing that short term arrival rates are moderate.
+Larger numbers and lower message ages are more indicative of current trouble.
+Old mail still going nowhere is largely harmless so long as the "active" and
+"incoming" queues are short. We can also see that the groups.msn.com
+undeliverables are low rate steady stream rather than a concentrated dictionary
+attack that is now over.
+
+ $ qshape -s deferred | head
+
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 2193 4 4 5 8 33 56 104 205 465 1309
+ MAILER-DAEMON 1709 4 4 5 8 33 55 101 198 452 849
+ example.com 263 0 0 0 0 0 0 0 0 2 261
+ example.org 209 0 0 0 0 0 1 3 6 11 188
+ example.net 6 0 0 0 0 0 0 0 0 0 6
+ example.edu 3 0 0 0 0 0 0 0 0 0 3
+ example.gov 2 0 0 0 0 0 0 0 1 0 1
+ example.mil 1 0 0 0 0 0 0 0 0 0 1
+
+Looking at the sender distribution, we see that as expected most of the
+messages are bounces.
+
+EExxaammppllee 33:: CCoonnggeessttiioonn iinn tthhee aaccttiivvee qquueeuuee
+
+This example is taken from a Feb 2004 discussion on the Postfix Users list.
+Congestion was reported with the "active" and "incoming" queues large and not
+shrinking despite very large delivery agent process limits. The thread is
+archived at: http://groups.google.com/
+groups?threadm=c0b7js$2r65$1@FreeBSD.csie.NCTU.edu.tw and http://
+archives.neohapsis.com/archives/postfix/2004-02/thread.html#1371
+
+Using an older version of qshape(1) it was quickly determined that all the
+messages were for just a few destinations:
+
+ $ qshape (show "incoming" and "active" queue status)
+
+ T A 5 10 20 40 80 160 320 320+
+ TOTAL 11775 9996 0 0 1 1 42 94 221 1420
+ user.sourceforge.net 7678 7678 0 0 0 0 0 0 0 0
+ lists.sourceforge.net 2313 2313 0 0 0 0 0 0 0 0
+ gzd.gotdns.com 102 0 0 0 0 0 0 0 2 100
+
+The "A" column showed the count of messages in the "active" queue, and the
+numbered columns showed totals for the "deferred" queue. At 10000 messages
+(Postfix 1.x "active" queue size limit) the "active" queue is full. The
+"incoming" queue was growing rapidly.
+
+With the trouble destinations clearly identified, the administrator quickly
+found and fixed the problem. It is substantially harder to glean the same
+information from the logs. While a careful reading of mailq(1) output should
+yield similar results, it is much harder to gauge the magnitude of the problem
+by looking at the queue one message at a time.
+
+EExxaammppllee 44:: HHiigghh vvoolluummee ddeessttiinnaattiioonn bbaacckklloogg
+
+When a site you send a lot of email to is down or slow, mail messages will
+rapidly build up in the "deferred" queue, or worse, in the "active" queue. The
+qshape output will show large numbers for the destination domain in all age
+buckets that overlap the starting time of the problem:
+
+ $ qshape deferred | head
+
+ T 5 10 20 40 80 160 320 640 1280 1280+
+ TOTAL 5000 200 200 400 800 1600 1000 200 200 200 200
+ highvolume.com 4000 160 160 320 640 1280 1440 0 0 0 0
+ ...
+
+Here the "highvolume.com" destination is continuing to accumulate deferred
+mail. The "incoming" and "active" queues are fine, but the "deferred" queue
+started growing some time between 1 and 2 hours ago and continues to grow.
+
+If the high volume destination is not down, but is instead slow, one might see
+similar congestion in the "active" queue. "Active" queue congestion is a
+greater cause for alarm; one might need to take measures to ensure that the
+mail is deferred instead or even add an access(5) rule asking the sender to try
+again later.
+
+If a high volume destination exhibits frequent bursts of consecutive
+connections refused by all MX hosts or "421 Server busy errors", it is possible
+for the queue manager to mark the destination as "dead" despite the transient
+nature of the errors. The destination will be retried again after the
+expiration of a $minimal_backoff_time timer. If the error bursts are frequent
+enough it may be that only a small quantity of email is delivered before the
+destination is again marked "dead". In some cases enabling static (not on
+demand) connection caching by listing the appropriate nexthop domain in a table
+included in "smtp_connection_cache_destinations" may help to reduce the error
+rate, because most messages will re-use existing connections.
+
+The MTA that has been observed most frequently to exhibit such bursts of errors
+is Microsoft Exchange, which refuses connections under load. Some proxy virus
+scanners in front of the Exchange server propagate the refused connection to
+the client as a "421" error.
+
+Note that it is now possible to configure Postfix to exhibit similarly erratic
+behavior by misconfiguring the anvil(8) service. Do not use anvil(8) for
+steady-state rate limiting, its purpose is (unintentional) DoS prevention and
+the rate limits set should be very generous!
+
+If one finds oneself needing to deliver a high volume of mail to a destination
+that exhibits frequent brief bursts of errors and connection caching does not
+solve the problem, there is a subtle workaround.
+
+ * Postfix version 2.5 and later:
+
+ o In master.cf set up a dedicated clone of the "smtp" transport for the
+ destination in question. In the example below we will call it
+ "fragile".
+
+ o In master.cf configure a reasonable process limit for the cloned smtp
+ transport (a number in the 10-20 range is typical).
+
+ o IMPORTANT!!! In main.cf configure a large per-destination pseudo-cohort
+ failure limit for the cloned smtp transport.
+
+ /etc/postfix/main.cf:
+ transport_maps = hash:/etc/postfix/transport
+ fragile_destination_concurrency_failed_cohort_limit = 100
+ fragile_destination_concurrency_limit = 20
+
+ /etc/postfix/transport:
+ example.com fragile:
+
+ /etc/postfix/master.cf:
+ # service type private unpriv chroot wakeup maxproc command
+ fragile unix - - n - 20 smtp
+
+ See also the documentation for
+ default_destination_concurrency_failed_cohort_limit and
+ default_destination_concurrency_limit.
+
+ * Earlier Postfix versions:
+
+ o In master.cf set up a dedicated clone of the "smtp" transport for the
+ destination in question. In the example below we will call it
+ "fragile".
+
+ o In master.cf configure a reasonable process limit for the transport (a
+ number in the 10-20 range is typical).
+
+ o IMPORTANT!!! In main.cf configure a very large initial and destination
+ concurrency limit for this transport (say 2000).
+
+ /etc/postfix/main.cf:
+ transport_maps = hash:/etc/postfix/transport
+ initial_destination_concurrency = 2000
+ fragile_destination_concurrency_limit = 2000
+
+ /etc/postfix/transport:
+ example.com fragile:
+
+ /etc/postfix/master.cf:
+ # service type private unpriv chroot wakeup maxproc command
+ fragile unix - - n - 20 smtp
+
+ See also the documentation for default_destination_concurrency_limit.
+
+The effect of this configuration is that up to 2000 consecutive errors are
+tolerated without marking the destination dead, while the total concurrency
+remains reasonable (10-20 processes). This trick is only for a very specialized
+situation: high volume delivery into a channel with multi-error bursts that is
+capable of high throughput, but is repeatedly throttled by the bursts of
+errors.
+
+When a destination is unable to handle the load even after the Postfix process
+limit is reduced to 1, a desperate measure is to insert brief delays between
+delivery attempts.
+
+ * Postfix version 2.5 and later:
+
+ o In master.cf set up a dedicated clone of the "smtp" transport for the
+ problem destination. In the example below we call it "slow".
+
+ o In main.cf configure a short delay between deliveries to the same
+ destination.
+
+ /etc/postfix/main.cf:
+ transport_maps = hash:/etc/postfix/transport
+ slow_destination_rate_delay = 1
+ slow_destination_concurrency_failed_cohort_limit = 100
+
+ /etc/postfix/transport:
+ example.com slow:
+
+ /etc/postfix/master.cf:
+ # service type private unpriv chroot wakeup maxproc command
+ slow unix - - n - - smtp
+
+ See also the documentation for default_destination_rate_delay.
+
+ This solution forces the Postfix smtp(8) client to wait for
+ $slow_destination_rate_delay seconds between deliveries to the same
+ destination.
+
+ IMPORTANT!! The large slow_destination_concurrency_failed_cohort_limit
+ value is needed. This prevents Postfix from deferring all mail for the same
+ destination after only one connection or handshake error (the reason for
+ this is that non-zero slow_destination_rate_delay forces a per-destination
+ concurrency of 1).
+
+ * Earlier Postfix versions:
+
+ o In the transport map entry for the problem destination, specify a dead
+ host as the primary nexthop.
+
+ o In the master.cf entry for the transport specify the problem
+ destination as the fallback_relay and specify a small
+ smtp_connect_timeout value.
+
+ /etc/postfix/main.cf:
+ transport_maps = hash:/etc/postfix/transport
+
+ /etc/postfix/transport:
+ example.com slow:[dead.host]
+
+ /etc/postfix/master.cf:
+ # service type private unpriv chroot wakeup maxproc command
+ slow unix - - n - 1 smtp
+ -o fallback_relay=problem.example.com
+ -o smtp_connect_timeout=1
+ -o smtp_connection_cache_on_demand=no
+
+ This solution forces the Postfix smtp(8) client to wait for
+ $smtp_connect_timeout seconds between deliveries. The connection caching
+ feature is disabled to prevent the client from skipping over the dead host.
+
+PPoossttffiixx qquueeuuee ddiirreeccttoorriieess
+
+The following sections describe Postfix queues: their purpose, what normal
+behavior looks like, and how to diagnose abnormal behavior.
+
+TThhee ""mmaaiillddrroopp"" qquueeuuee
+
+Messages that have been submitted via the Postfix sendmail(1) command, but not
+yet brought into the main Postfix queue by the pickup(8) service, await
+processing in the "maildrop" queue. Messages can be added to the "maildrop"
+queue even when the Postfix system is not running. They will begin to be
+processed once Postfix is started.
+
+The "maildrop" queue is drained by the single threaded pickup(8) service
+scanning the queue directory periodically or when notified of new message
+arrival by the postdrop(1) program. The postdrop(1) program is a setgid helper
+that allows the unprivileged Postfix sendmail(1) program to inject mail into
+the "maildrop" queue and to notify the pickup(8) service of its arrival.
+
+All mail that enters the main Postfix queue does so via the cleanup(8) service.
+The cleanup service is responsible for envelope and header rewriting, header
+and body regular expression checks, automatic bcc recipient processing, milter
+content processing, and reliable insertion of the message into the Postfix
+"incoming" queue.
+
+In the absence of excessive CPU consumption in cleanup(8) header or body
+regular expression checks or other software consuming all available CPU
+resources, Postfix performance is disk I/O bound. The rate at which the pickup
+(8) service can inject messages into the queue is largely determined by disk
+access times, since the cleanup(8) service must commit the message to stable
+storage before returning success. The same is true of the postdrop(1) program
+writing the message to the "maildrop" directory.
+
+As the pickup service is single threaded, it can only deliver one message at a
+time at a rate that does not exceed the reciprocal disk I/O latency (+ CPU if
+not negligible) of the cleanup service.
+
+Congestion in this queue is indicative of an excessive local message submission
+rate or perhaps excessive CPU consumption in the cleanup(8) service due to
+excessive body_checks, or (Postfix >= 2.3) high latency milters.
+
+Note, that once the "active" queue is full, the cleanup service will attempt to
+slow down message injection by pausing $in_flow_delay for each message. In this
+case "maildrop" queue congestion may be a consequence of congestion downstream,
+rather than a problem in its own right.
+
+Note, you should not attempt to deliver large volumes of mail via the pickup(8)
+service. High volume sites should avoid using "simple" content filters that re-
+inject scanned mail via Postfix sendmail(1) and postdrop(1).
+
+A high arrival rate of locally submitted mail may be an indication of an
+uncaught forwarding loop, or a run-away notification program. Try to keep the
+volume of local mail injection to a moderate level.
+
+The "postsuper -r" command can place selected messages into the "maildrop"
+queue for reprocessing. This is most useful for resetting any stale
+content_filter settings. Requeuing a large number of messages using "postsuper
+-r" can clearly cause a spike in the size of the "maildrop" queue.
+
+TThhee ""hhoolldd"" qquueeuuee
+
+The administrator can define "smtpd" access(5) policies, or cleanup(8) header/
+body checks that cause messages to be automatically diverted from normal
+processing and placed indefinitely in the "hold" queue. Messages placed in the
+"hold" queue stay there until the administrator intervenes. No periodic
+delivery attempts are made for messages in the "hold" queue. The postsuper(1)
+command can be used to manually release messages into the "deferred" queue.
+
+Messages can potentially stay in the "hold" queue longer than
+$maximal_queue_lifetime. If such "old" messages need to be released from the
+"hold" queue, they should typically be moved into the "maildrop" queue using
+"postsuper -r", so that the message gets a new timestamp and is given more than
+one opportunity to be delivered. Messages that are "young" can be moved
+directly into the "deferred" queue using "postsuper -H".
+
+The "hold" queue plays little role in Postfix performance, and monitoring of
+the "hold" queue is typically more closely motivated by tracking spam and
+malware, than by performance issues.
+
+TThhee ""iinnccoommiinngg"" qquueeuuee
+
+All new mail entering the Postfix queue is written by the cleanup(8) service
+into the "incoming" queue. New queue files are created owned by the "postfix"
+user with an access bitmask (or mode) of 0600. Once a queue file is ready for
+further processing the cleanup(8) service changes the queue file mode to 0700
+and notifies the queue manager of new mail arrival. The queue manager ignores
+incomplete queue files whose mode is 0600, as these are still being written by
+cleanup.
+
+The queue manager scans the "incoming" queue bringing any new mail into the
+"active" queue if the "active" queue resource limits have not been exceeded. By
+default, the "active" queue accommodates at most 20000 messages. Once the
+"active" queue message limit is reached, the queue manager stops scanning the
+"incoming" queue (and the "deferred" queue, see below).
+
+Under normal conditions the "incoming" queue is nearly empty (has only mode
+0600 files), with the queue manager able to import new messages into the
+"active" queue as soon as they become available.
+
+The "incoming" queue grows when the message input rate spikes above the rate at
+which the queue manager can import messages into the "active" queue. The main
+factors slowing down the queue manager are disk I/O and lookup queries to the
+trivial-rewrite service. If the queue manager is routinely not keeping up,
+consider not using "slow" lookup services (MySQL, LDAP, ...) for transport
+lookups or speeding up the hosts that provide the lookup service. If the
+problem is I/O starvation, consider striping the queue over more disks, faster
+controllers with a battery write cache, or other hardware improvements. At the
+very least, make sure that the queue directory is mounted with the "noatime"
+option if applicable to the underlying filesystem.
+
+The in_flow_delay parameter is used to clamp the input rate when the queue
+manager starts to fall behind. The cleanup(8) service will pause for
+$in_flow_delay seconds before creating a new queue file if it cannot obtain a
+"token" from the queue manager.
+
+Since the number of cleanup(8) processes is limited in most cases by the SMTP
+server concurrency, the input rate can exceed the output rate by at most "SMTP
+connection count" / $in_flow_delay messages per second.
+
+With a default process limit of 100, and an in_flow_delay of 1s, the coupling
+is strong enough to limit a single run-away injector to 1 message per second,
+but is not strong enough to deflect an excessive input rate from many sources
+at the same time.
+
+If a server is being hammered from multiple directions, consider raising the
+in_flow_delay to 10 seconds, but only if the "incoming" queue is growing even
+while the "active" queue is not full and the trivial-rewrite service is using a
+fast transport lookup mechanism.
+
+TThhee ""aaccttiivvee"" qquueeuuee
+
+The queue manager is a delivery agent scheduler; it works to ensure fast and
+fair delivery of mail to all destinations within designated resource limits.
+
+The "active" queue is somewhat analogous to an operating system's process run
+queue. Messages in the "active" queue are ready to be sent (runnable), but are
+not necessarily in the process of being sent (running).
+
+While most Postfix administrators think of the "active" queue as a directory on
+disk, the real "active" queue is a set of data structures in the memory of the
+queue manager process.
+
+Messages in the "maildrop", "hold", "incoming" and "deferred" queues (see
+below) do not occupy memory; they are safely stored on disk waiting for their
+turn to be processed. The envelope information for messages in the "active"
+queue is managed in memory, allowing the queue manager to do global scheduling,
+allocating available delivery agent processes to an appropriate message in the
+"active" queue.
+
+Within the "active" queue, (multi-recipient) messages are broken up into groups
+of recipients that share the same transport/nexthop combination; the group size
+is capped by the transport's recipient concurrency limit.
+
+Multiple recipient groups (from one or more messages) are queued for delivery
+grouped by transport/nexthop combination. The ddeessttiinnaattiioonn concurrency limit for
+the transports caps the number of simultaneous delivery attempts for each
+nexthop. Transports with a rreecciippiieenntt concurrency limit of 1 are special: these
+are grouped by the actual recipient address rather than the nexthop, yielding
+per-recipient concurrency limits rather than per-domain concurrency limits.
+Per-recipient limits are appropriate when performing final delivery to
+mailboxes rather than when relaying to a remote server.
+
+Congestion occurs in the "active" queue when one or more destinations drain
+slower than the corresponding message input rate.
+
+Input into the "active" queue comes both from new mail in the "incoming" queue,
+and retries of mail in the "deferred" queue. Should the "deferred" queue get
+really large, retries of old mail can dominate the arrival rate of new mail.
+Systems with more CPU, faster disks and more network bandwidth can deal with
+larger "deferred" queues, but as a rule of thumb the "deferred" queue scales to
+somewhere between 100,000 and 1,000,000 messages with good performance unlikely
+above that "limit". Systems with queues this large should typically stop
+accepting new mail, or put the backlog "on hold" until the underlying issue is
+fixed (provided that there is enough capacity to handle just the new mail).
+
+When a destination is down for some time, the queue manager will mark it dead,
+and immediately defer all mail for the destination without trying to assign it
+to a delivery agent. In this case the messages will quickly leave the "active"
+queue and end up in the "deferred" queue (with Postfix < 2.4, this is done
+directly by the queue manager, with Postfix >= 2.4 this is done via the "retry"
+delivery agent).
+
+When the destination is instead simply slow, or there is a problem causing an
+excessive arrival rate the "active" queue will grow and will become dominated
+by mail to the congested destination.
+
+The only way to reduce congestion is to either reduce the input rate or
+increase the throughput. Increasing the throughput requires either increasing
+the concurrency or reducing the latency of deliveries.
+
+For high volume sites a key tuning parameter is the number of "smtp" delivery
+agents allocated to the "smtp" and "relay" transports. High volume sites tend
+to send to many different destinations, many of which may be down or slow, so a
+good fraction of the available delivery agents will be blocked waiting for slow
+sites. Also mail destined across the globe will incur large SMTP command-
+response latencies, so high message throughput can only be achieved with more
+concurrent delivery agents.
+
+The default "smtp" process limit of 100 is good enough for most sites, and may
+even need to be lowered for sites with low bandwidth connections (no use
+increasing concurrency once the network pipe is full). When one finds that the
+queue is growing on an "idle" system (CPU, disk I/O and network not exhausted)
+the remaining reason for congestion is insufficient concurrency in the face of
+a high average latency. If the number of outbound SMTP connections (either
+ESTABLISHED or SYN_SENT) reaches the process limit, mail is draining slowly and
+the system and network are not loaded, raise the "smtp" and/or "relay" process
+limits!
+
+When a high volume destination is served by multiple MX hosts with typically
+low delivery latency, performance can suffer dramatically when one of the MX
+hosts is unresponsive and SMTP connections to that host timeout. For example,
+if there are 2 equal weight MX hosts, the SMTP connection timeout is 30 seconds
+and one of the MX hosts is down, the average SMTP connection will take
+approximately 15 seconds to complete. With a default per-destination
+concurrency limit of 20 connections, throughput falls to just over 1 message
+per second.
+
+The best way to avoid bottlenecks when one or more MX hosts is non-responsive
+is to use connection caching. Connection caching was introduced with Postfix
+2.2 and is by default enabled on demand for destinations with a backlog of mail
+in the "active" queue. When connection caching is in effect for a particular
+destination, established connections are re-used to send additional messages,
+this reduces the number of connections made per message delivery and maintains
+good throughput even in the face of partial unavailability of the destination's
+MX hosts.
+
+If connection caching is not available (Postfix < 2.2) or does not provide a
+sufficient latency reduction, especially for the "relay" transport used to
+forward mail to "your own" domains, consider setting lower than default SMTP
+connection timeouts (1-5 seconds) and higher than default destination
+concurrency limits. This will further reduce latency and provide more
+concurrency to maintain throughput should latency rise.
+
+Setting high concurrency limits to domains that are not your own may be viewed
+as hostile by the receiving system, and steps may be taken to prevent you from
+monopolizing the destination system's resources. The defensive measures may
+substantially reduce your throughput or block access entirely. Do not set
+aggressive concurrency limits to remote domains without coordinating with the
+administrators of the target domain.
+
+If necessary, dedicate and tune custom transports for selected high volume
+destinations. The "relay" transport is provided for forwarding mail to domains
+for which your server is a primary or backup MX host. These can make up a
+substantial fraction of your email traffic. Use the "relay" and not the "smtp"
+transport to send email to these domains. Using the "relay" transport allocates
+a separate delivery agent pool to these destinations and allows separate tuning
+of timeouts and concurrency limits.
+
+Another common cause of congestion is unwarranted flushing of the entire
+"deferred" queue. The "deferred" queue holds messages that are likely to fail
+to be delivered and are also likely to be slow to fail delivery (time out). As
+a result the most common reaction to a large "deferred" queue (flush it!) is
+more than likely counter-productive, and typically makes the congestion worse.
+Do not flush the "deferred" queue unless you expect that most of its content
+has recently become deliverable (e.g. relayhost back up after an outage)!
+
+Note that whenever the queue manager is restarted, there may already be
+messages in the "active" queue directory, but the "real" "active" queue in
+memory is empty. In order to recover the in-memory state, the queue manager
+moves all the "active" queue messages back into the "incoming" queue, and then
+uses its normal "incoming" queue scan to refill the "active" queue. The process
+of moving all the messages back and forth, redoing transport table (trivial-
+rewrite(8) resolve service) lookups, and re-importing the messages back into
+memory is expensive. At all costs, avoid frequent restarts of the queue manager
+(e.g. via frequent execution of "postfix reload").
+
+TThhee ""ddeeffeerrrreedd"" qquueeuuee
+
+When all the deliverable recipients for a message are delivered, and for some
+recipients delivery failed for a transient reason (it might succeed later), the
+message is placed in the "deferred" queue.
+
+The queue manager scans the "deferred" queue periodically. The scan interval is
+controlled by the queue_run_delay parameter. While a "deferred" queue scan is
+in progress, if an "incoming" queue scan is also in progress (ideally these are
+brief since the "incoming" queue should be short), the queue manager alternates
+between looking for messages in the "incoming" queue and in the "deferred"
+queue. This "round-robin" strategy prevents starvation of either the "incoming"
+or the "deferred" queues.
+
+Each "deferred" queue scan only brings a fraction of the "deferred" queue back
+into the "active" queue for a retry. This is because each message in the
+"deferred" queue is assigned a "cool-off" time when it is deferred. This is
+done by time-warping the modification time of the queue file into the future.
+The queue file is not eligible for a retry if its modification time is not yet
+reached.
+
+The "cool-off" time is at least $minimal_backoff_time and at most
+$maximal_backoff_time. The next retry time is set by doubling the message's age
+in the queue, and adjusting up or down to lie within the limits. This means
+that young messages are initially retried more often than old messages.
+
+If a high volume site routinely has large "deferred" queues, it may be useful
+to adjust the queue_run_delay, minimal_backoff_time and maximal_backoff_time to
+provide short enough delays on first failure (Postfix >= 2.4 has a sensibly low
+minimal backoff time by default), with perhaps longer delays after multiple
+failures, to reduce the retransmission rate of old messages and thereby reduce
+the quantity of previously deferred mail in the "active" queue. If you want a
+really low minimal_backoff_time, you may also want to lower queue_run_delay,
+but understand that more frequent scans will increase the demand for disk I/O.
+
+One common cause of large "deferred" queues is failure to validate recipients
+at the SMTP input stage. Since spammers routinely launch dictionary attacks
+from unrepliable sender addresses, the bounces for invalid recipient addresses
+clog the "deferred" queue (and at high volumes proportionally clog the "active"
+queue). Recipient validation is strongly recommended through use of the
+local_recipient_maps and relay_recipient_maps parameters. Even when bounces
+drain quickly they inundate innocent victims of forgery with unwanted email. To
+avoid this, do not accept mail for invalid recipients.
+
+When a host with lots of deferred mail is down for some time, it is possible
+for the entire "deferred" queue to reach its retry time simultaneously. This
+can lead to a very full "active" queue once the host comes back up. The
+phenomenon can repeat approximately every maximal_backoff_time seconds if the
+messages are again deferred after a brief burst of congestion. Perhaps, a
+future Postfix release will add a random offset to the retry time (or use a
+combination of strategies) to reduce the odds of repeated complete "deferred"
+queue flushes.
+
+CCrreeddiittss
+
+The qshape(1) program was developed by Victor Duchovni of Morgan Stanley, who
+also wrote the initial version of this document.
+