diff options
Diffstat (limited to '')
| -rw-r--r-- | README_FILES/SOHO_README | 288 |
1 files changed, 288 insertions, 0 deletions
diff --git a/README_FILES/SOHO_README b/README_FILES/SOHO_README new file mode 100644 index 0000000..bbba7c2 --- /dev/null +++ b/README_FILES/SOHO_README @@ -0,0 +1,288 @@ +PPoossttffiixx SSmmaallll//HHoommee OOffffiiccee HHiinnttss aanndd TTiippss + +------------------------------------------------------------------------------- + +OOvveerrvviieeww + +This document combines hints and tips for "small office/home office" +applications into one document so that they are easier to find. The text +describes the mail sending side only. If your machine does not receive mail +directly (i.e. it does not have its own Internet domain name and its own fixed +IP address), then you will need a solution such as "fetchmail", which is +outside the scope of the Postfix documentation. + + * Selected topics from the STANDARD_CONFIGURATION_README document: + + o Postfix on a stand-alone Internet host + o Postfix on hosts without a real Internet hostname + + Selected topics from the SASL_README document: + + o Enabling SASL authentication in the Postfix SMTP client + o Configuring Sender-Dependent SASL authentication + +See the SASL_README and STANDARD_CONFIGURATION_README documents for further +information on these topics. + +PPoossttffiixx oonn aa ssttaanndd--aalloonnee IInntteerrnneett hhoosstt + +Postfix should work out of the box without change on a stand-alone machine that +has direct Internet access. At least, that is how Postfix installs when you +download the Postfix source code via http://www.postfix.org/. + +You can use the command "ppoossttccoonnff --nn" to find out what settings are overruled +by your main.cf. Besides a few pathname settings, few parameters should be set +on a stand-alone box, beyond what is covered in the BASIC_CONFIGURATION_README +document: + + /etc/postfix/main.cf: + # Optional: send mail as user@domainname instead of user@hostname. + #myorigin = $mydomain + + # Optional: specify NAT/proxy external address. + #proxy_interfaces = 1.2.3.4 + + # Alternative 1: don't relay mail from other hosts. + mynetworks_style = host + relay_domains = + + # Alternative 2: relay mail from local clients only. + # mynetworks = 192.168.1.0/28 + # relay_domains = + +See also the section "Postfix on hosts without a real Internet hostname" if +this is applicable to your configuration. + +PPoossttffiixx oonn hhoossttss wwiitthhoouutt aa rreeaall IInntteerrnneett hhoossttnnaammee + +This section is for hosts that don't have their own Internet hostname. +Typically these are systems that get a dynamic IP address via DHCP or via +dialup. Postfix will let you send and receive mail just fine between accounts +on a machine with a fantasy name. However, you cannot use a fantasy hostname in +your email address when sending mail into the Internet, because no-one would be +able to reply to your mail. In fact, more and more sites refuse mail addresses +with non-existent domain names. + +Note: the following information is Postfix version dependent. To find out what +Postfix version you have, execute the command "ppoossttccoonnff mmaaiill__vveerrssiioonn". + +SSoolluuttiioonn 11:: PPoossttffiixx vveerrssiioonn 22..22 aanndd llaatteerr + +Postfix 2.2 uses the generic(5) address mapping to replace local fantasy email +addresses by valid Internet addresses. This mapping happens ONLY when mail +leaves the machine; not when you send mail between users on the same machine. + +The following example presents additional configuration. You need to combine +this with basic configuration information as discussed in the first half of +this document. + + 1 /etc/postfix/main.cf: + 2 smtp_generic_maps = hash:/etc/postfix/generic + 3 + 4 /etc/postfix/generic: + 5 his@localdomain.local hisaccount@hisisp.example + 6 her@localdomain.local heraccount@herisp.example + 7 @localdomain.local hisaccount+local@hisisp.example + +When mail is sent to a remote host via SMTP: + + * Line 5 replaces his@localdomain.local by his ISP mail address, + + * Line 6 replaces her@localdomain.local by her ISP mail address, and + + * Line 7 replaces other local addresses by his ISP account, with an address + extension of +local (this example assumes that the ISP supports "+" style + address extensions). + +Specify ddbbmm instead of hhaasshh if your system uses ddbbmm files instead of ddbb files. +To find out what lookup tables Postfix supports, use the command "ppoossttccoonnff --mm". + +Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//ggeenneerriicc" whenever you change the +generic table. + +SSoolluuttiioonn 22:: PPoossttffiixx vveerrssiioonn 22..11 aanndd eeaarrlliieerr + +The solution with older Postfix systems is to use valid Internet addresses +where possible, and to let Postfix map valid Internet addresses to local +fantasy addresses. With this, you can send mail to the Internet and to local +fantasy addresses, including mail to local fantasy addresses that don't have a +valid Internet address of their own. + +The following example presents additional configuration. You need to combine +this with basic configuration information as discussed in the first half of +this document. + + 1 /etc/postfix/main.cf: + 2 myhostname = hostname.localdomain + 3 mydomain = localdomain + 4 + 5 canonical_maps = hash:/etc/postfix/canonical + 6 + 7 virtual_alias_maps = hash:/etc/postfix/virtual + 8 + 9 /etc/postfix/canonical: + 10 your-login-name your-account@your-isp.com + 11 + 12 /etc/postfix/virtual: + 13 your-account@your-isp.com your-login-name + +Translation: + + * Lines 2-3: Substitute your fantasy hostname here. Do not use a domain name + that is already in use by real organizations on the Internet. See RFC 2606 + for examples of domain names that are guaranteed not to be owned by anyone. + + * Lines 5, 9, 10: This provides the mapping from "your-login- + name@hostname.localdomain" to "your-account@your-isp.com". This part is + required. + + * Lines 7, 12, 13: Deliver mail for "your-account@your-isp.com" locally, + instead of sending it to the ISP. This part is not required but is + convenient. + +Specify ddbbmm instead of hhaasshh if your system uses ddbbmm files instead of ddbb files. +To find out what lookup tables Postfix supports, use the command "ppoossttccoonnff --mm". + +Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//ccaannoonniiccaall" whenever you change the +canonical table. + +Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//vviirrttuuaall" whenever you change the +virtual table. + +EEnnaabblliinngg SSAASSLL aauutthheennttiiccaattiioonn iinn tthhee PPoossttffiixx SSMMTTPP//LLMMTTPP cclliieenntt + +This section shows a typical scenario where the Postfix SMTP client sends all +messages via a mail gateway server that requires SASL authentication. + + TTrroouubbllee ssoollvviinngg ttiippss:: + + * If your SASL logins fail with "SASL authentication failure: No worthy + mechs found" in the mail logfile, then see the section "Postfix SMTP/ + LMTP client policy - SASL mechanism pprrooppeerrttiieess". + + * For a solution to a more obscure class of SASL authentication failures, + see "Postfix SMTP/LMTP client policy - SASL mechanism nnaammeess". + +To make the example more readable we introduce it in two parts. The first part +takes care of the basic configuration, while the second part sets up the +username/password information. + + /etc/postfix/main.cf: + smtp_sasl_auth_enable = yes + smtp_tls_security_level = encrypt + smtp_sasl_tls_security_options = noanonymous + relayhost = [mail.isp.example] + # Alternative form: + # relayhost = [mail.isp.example]:submission + smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd + + * The smtp_sasl_auth_enable setting enables client-side authentication. We + will configure the client's username and password information in the second + part of the example. + + * The smtp_tls_security_level setting ensures that the connection to the + remote smtp server will be encrypted, and smtp_sasl_tls_security_options + removes the prohibition on plaintext passwords. + + * The relayhost setting forces the Postfix SMTP to send all remote messages + to the specified mail server instead of trying to deliver them directly to + their destination. + + * In the relayhost setting, the "[" and "]" prevent the Postfix SMTP client + from looking up MX (mail exchanger) records for the enclosed name. + + * The relayhost destination may also specify a non-default TCP port. For + example, the alternative form [mail.isp.example]:submission tells Postfix + to connect to TCP network port 587, which is reserved for email client + applications. + + * The Postfix SMTP client is compatible with SMTP servers that use the non- + standard "AUTH=mmeetthhoodd....." syntax in response to the EHLO command; this + requires no additional Postfix client configuration. + + * With the setting "smtp_tls_wrappermode = yes", the Postfix SMTP client + supports the "wrappermode" protocol, which uses TCP port 465 on the SMTP + server (Postfix 3.0 and later). + + * With the smtp_sasl_password_maps parameter, we configure the Postfix SMTP + client to send username and password information to the mail gateway + server. As discussed in the next section, the Postfix SMTP client supports + multiple ISP accounts. For this reason the username and password are stored + in a table that contains one username/password combination for each mail + gateway server. + + /etc/postfix/sasl_passwd: + # destination credentials + [mail.isp.example] username:password + # Alternative form: + # [mail.isp.example]:submission username:password + + IImmppoorrttaanntt + + Keep the SASL client password file in /etc/postfix, and make the file + read+write only for root to protect the username/password combinations + against other users. The Postfix SMTP client will still be able to read the + SASL client passwords. It opens the file as user root before it drops + privileges, and before entering an optional chroot jail. + + * Use the postmap command whenever you change the /etc/postfix/sasl_passwd + file. + + * If you specify the "[" and "]" in the relayhost destination, then you must + use the same form in the smtp_sasl_password_maps file. + + * If you specify a non-default TCP Port (such as ":submission" or ":587") in + the relayhost destination, then you must use the same form in the + smtp_sasl_password_maps file. + +CCoonnffiigguurriinngg SSeennddeerr--DDeeppeennddeenntt SSAASSLL aauutthheennttiiccaattiioonn + +Postfix supports different ISP accounts for different sender addresses (version +2.3 and later). This can be useful when one person uses the same machine for +work and for personal use, or when people with different ISP accounts share the +same Postfix server. + +To make this possible, Postfix supports per-sender SASL passwords and per- +sender relay hosts. In the example below, the Postfix SMTP client will search +the SASL password file by sender address before it searches that same file by +destination. Likewise, the Postfix trivial-rewrite(8) daemon will search the +per-sender relayhost file, and use the default relayhost setting only as a +final resort. + + /etc/postfix/main.cf: + smtp_sender_dependent_authentication = yes + sender_dependent_relayhost_maps = hash:/etc/postfix/sender_relay + smtp_sasl_auth_enable = yes + smtp_sasl_password_maps = hash:/etc/postfix/sasl_passwd + relayhost = [mail.isp.example] + # Alternative form: + # relayhost = [mail.isp.example]:submission + + /etc/postfix/sasl_passwd: + # Per-sender authentication; see also /etc/postfix/sender_relay. + user1@example.com username1:password1 + user2@example.net username2:password2 + # Login information for the default relayhost. + [mail.isp.example] username:password + # Alternative form: + # [mail.isp.example]:submission username:password + + /etc/postfix/sender_relay: + # Per-sender provider; see also /etc/postfix/sasl_passwd. + user1@example.com [mail.example.com]:submission + user2@example.net [mail.example.net] + + * If you are creative, then you can try to combine the two tables into one + single MySQL database, and configure different Postfix queries to extract + the appropriate information. + + * Specify ddbbmm instead of hhaasshh if your system uses ddbbmm files instead of ddbb + files. To find out what lookup tables Postfix supports, use the command + "ppoossttccoonnff --mm". + + * Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//ssaassll__ppaasssswwdd" whenever you change + the sasl_passwd table. + + * Execute the command "ppoossttmmaapp //eettcc//ppoossttffiixx//sseennddeerr__rreellaayy" whenever you change + the sender_relay table. + |