diff options
Diffstat (limited to '')
| -rw-r--r-- | proto/access | 468 |
1 files changed, 468 insertions, 0 deletions
diff --git a/proto/access b/proto/access new file mode 100644 index 0000000..0fe2a89 --- /dev/null +++ b/proto/access @@ -0,0 +1,468 @@ +#++ +# NAME +# access 5 +# SUMMARY +# Postfix SMTP server access table +# SYNOPSIS +# \fBpostmap /etc/postfix/access\fR +# +# \fBpostmap -q "\fIstring\fB" /etc/postfix/access\fR +# +# \fBpostmap -q - /etc/postfix/access <\fIinputfile\fR +# DESCRIPTION +# This document describes access control on remote SMTP client +# information: host names, network addresses, and envelope +# sender or recipient addresses; it is implemented by the +# Postfix SMTP server. See \fBheader_checks\fR(5) or +# \fBbody_checks\fR(5) for access control on the content of +# email messages. +# +# Normally, the \fBaccess\fR(5) table is specified as a text file +# that serves as input to the \fBpostmap\fR(1) command. +# The result, an indexed file in \fBdbm\fR or \fBdb\fR format, +# is used for fast searching by the mail system. Execute the +# command "\fBpostmap /etc/postfix/access\fR" to rebuild an +# indexed file after changing the corresponding text file. +# +# When the table is provided via other means such as NIS, LDAP +# or SQL, the same lookups are done as for ordinary indexed files. +# +# Alternatively, the table can be provided as a regular-expression +# map where patterns are given as regular expressions, or lookups +# can be directed to a TCP-based server. In those cases, the lookups +# are done in a slightly different way as described below under +# "REGULAR EXPRESSION TABLES" or "TCP-BASED TABLES". +# CASE FOLDING +# .ad +# .fi +# The search string is folded to lowercase before database +# lookup. As of Postfix 2.3, the search string is not case +# folded with database types such as regexp: or pcre: whose +# lookup fields can match both upper and lower case. +# TABLE FORMAT +# .ad +# .fi +# The input format for the \fBpostmap\fR(1) command is as follows: +# .IP "\fIpattern action\fR" +# When \fIpattern\fR matches a mail address, domain or host address, +# perform the corresponding \fIaction\fR. +# .IP "blank lines and comments" +# Empty lines and whitespace-only lines are ignored, as +# are lines whose first non-whitespace character is a `#'. +# .IP "multi-line text" +# A logical line starts with non-whitespace text. A line that +# starts with whitespace continues a logical line. +# EMAIL ADDRESS PATTERNS +# .ad +# .fi +# With lookups from indexed files such as DB or DBM, or from networked +# tables such as NIS, LDAP or SQL, patterns are tried in the order as +# listed below: +# .IP \fIuser\fR@\fIdomain\fR +# Matches the specified mail address. +# .IP \fIdomain.tld\fR +# Matches \fIdomain.tld\fR as the domain part of an email address. +# .sp +# The pattern \fIdomain.tld\fR also matches subdomains, but only +# when the string \fBsmtpd_access_maps\fR is listed in the Postfix +# \fBparent_domain_matches_subdomains\fR configuration setting. +# .IP \fI.domain.tld\fR +# Matches subdomains of \fIdomain.tld\fR, but only when the +# string \fBsmtpd_access_maps\fR is not listed in the Postfix +# \fBparent_domain_matches_subdomains\fR configuration setting. +# .IP \fIuser\fR@ +# Matches all mail addresses with the specified user part. +# .PP +# Note: lookup of the null sender address is not possible with +# some types of lookup table. By default, Postfix uses \fB<>\fR +# as the lookup key for such addresses. The value is specified with +# the \fBsmtpd_null_access_lookup_key\fR parameter in the Postfix +# \fBmain.cf\fR file. +# EMAIL ADDRESS EXTENSION +# .fi +# .ad +# When a mail address localpart contains the optional recipient delimiter +# (e.g., \fIuser+foo\fR@\fIdomain\fR), the lookup order becomes: +# \fIuser+foo\fR@\fIdomain\fR, \fIuser\fR@\fIdomain\fR, \fIdomain\fR, +# \fIuser+foo\fR@, and \fIuser\fR@. +# HOST NAME/ADDRESS PATTERNS +# .ad +# .fi +# With lookups from indexed files such as DB or DBM, or from networked +# tables such as NIS, LDAP or SQL, the following lookup patterns are +# examined in the order as listed: +# .IP \fIdomain.tld\fR +# Matches \fIdomain.tld\fR. +# .sp +# The pattern \fIdomain.tld\fR also matches subdomains, but only +# when the string \fBsmtpd_access_maps\fR is listed in the Postfix +# \fBparent_domain_matches_subdomains\fR configuration setting. +# .IP \fI.domain.tld\fR +# Matches subdomains of \fIdomain.tld\fR, but only when the +# string \fBsmtpd_access_maps\fR is not listed in the Postfix +# \fBparent_domain_matches_subdomains\fR configuration setting. +# .IP \fInet.work.addr.ess\fR +# .IP \fInet.work.addr\fR +# .IP \fInet.work\fR +# .IP \fInet\fR +# Matches a remote IPv4 host address or network address range. +# Specify one to four decimal octets separated by ".". Do not +# specify "[]" , "/", leading zeros, or hexadecimal forms. +# +# Network ranges are matched by repeatedly truncating the last +# ".octet" from a remote IPv4 host address string, until a +# match is found in the access table, or until further +# truncation is not possible. +# +# NOTE: use the \fBcidr\fR lookup table type to specify +# network/netmask patterns. See \fBcidr_table\fR(5) for details. +# .IP \fInet:work:addr:ess\fR +# .IP \fInet:work:addr\fR +# .IP \fInet:work\fR +# .IP \fInet\fR +# Matches a remote IPv6 host address or network address range. +# Specify three to eight hexadecimal octet pairs separated +# by ":", using the compressed form "::" for a sequence of +# zero-valued octet pairs. Do not specify "[]", "/", leading +# zeros, or non-compressed forms. +# +# A network range is matched by repeatedly truncating the +# last ":octetpair" from the compressed-form remote IPv6 host +# address string, until a match is found in the access table, +# or until further truncation is not possible. +# +# NOTE: use the \fBcidr\fR lookup table type to specify +# network/netmask patterns. See \fBcidr_table\fR(5) for details. +# +# IPv6 support is available in Postfix 2.2 and later. +# ACCEPT ACTIONS +# .ad +# .fi +# .IP \fBOK\fR +# Accept the address etc. that matches the pattern. +# .IP \fIall-numerical\fR +# An all-numerical result is treated as OK. This format is +# generated by address-based relay authorization schemes +# such as pop-before-smtp. +# .PP +# For other accept actions, see "OTHER ACTIONS" below. +# REJECT ACTIONS +# .ad +# .fi +# Postfix version 2.3 and later support enhanced status codes +# as defined in RFC 3463. +# When no code is specified at the beginning of the \fItext\fR +# below, Postfix inserts a default enhanced status code of "5.7.1" +# in the case of reject actions, and "4.7.1" in the case of +# defer actions. See "ENHANCED STATUS CODES" below. +# .IP "\fB4\fINN text\fR" +# .IP "\fB5\fINN text\fR" +# Reject the address etc. that matches the pattern, and respond with +# the numerical three-digit code and text. \fB4\fINN\fR means "try +# again later", while \fB5\fINN\fR means "do not try again". +# +# The following responses have special meaning for the Postfix +# SMTP server: +# .RS +# .IP "\fB421 \fItext\fR (Postfix 2.3 and later)" +# .IP "\fB521 \fItext\fR (Postfix 2.6 and later)" +# After responding with the numerical three-digit code and +# text, disconnect immediately from the SMTP client. This +# frees up SMTP server resources so that they can be made +# available to another SMTP client. +# .IP +# Note: The "521" response should be used only with botnets +# and other malware where interoperability is of no concern. +# The "send 521 and disconnect" behavior is NOT defined in +# the SMTP standard. +# .RE +# .IP "\fBREJECT \fIoptional text...\fR +# Reject the address etc. that matches the pattern. Reply with +# "\fB$access_map_reject_code \fIoptional text...\fR" when the +# optional text is +# specified, otherwise reply with a generic error response message. +# .IP "\fBDEFER \fIoptional text...\fR +# Reject the address etc. that matches the pattern. Reply with +# "\fB$access_map_defer_code \fIoptional text...\fR" when the +# optional text is +# specified, otherwise reply with a generic error response message. +# .sp +# This feature is available in Postfix 2.6 and later. +# .IP "\fBDEFER_IF_REJECT \fIoptional text...\fR +# Defer the request if some later restriction would result in a +# REJECT action. Reply with "\fB$access_map_defer_code 4.7.1 +# \fIoptional text...\fR" when the +# optional text is specified, otherwise reply with a generic error +# response message. +# .sp +# Prior to Postfix 2.6, the SMTP reply code is 450. +# .sp +# This feature is available in Postfix 2.1 and later. +# .IP "\fBDEFER_IF_PERMIT \fIoptional text...\fR +# Defer the request if some later restriction would result in +# an explicit or implicit PERMIT action. +# Reply with "\fB$access_map_defer_code 4.7.1 \fI optional +# text...\fR" when the +# optional text is specified, otherwise reply with a generic error +# response message. +# .sp +# Prior to Postfix 2.6, the SMTP reply code is 450. +# .sp +# This feature is available in Postfix 2.1 and later. +# .PP +# For other reject actions, see "OTHER ACTIONS" below. +# OTHER ACTIONS +# .ad +# .fi +# .IP \fIrestriction...\fR +# Apply the named UCE restriction(s) (\fBpermit\fR, \fBreject\fR, +# \fBreject_unauth_destination\fR, and so on). +# .IP "\fBBCC \fIuser@domain\fR" +# Send one copy of the message to the specified recipient. +# .sp +# If multiple BCC actions are specified within the same SMTP +# MAIL transaction, with Postfix 3.0 only the last action +# will be used. +# .sp +# This feature is available in Postfix 3.0 and later. +# \" .IP "\fBDELAY \fItime\fR" +# \" Place the message into the deferred queue, and delay the +# \" initial delivery attempt by \fItime\fR. The time value may +# \" be followed by a one-character suffix that specifies the +# \" time unit: s (seconds), m (minutes), h (hours), d (days), +# \" w (weeks). The default time unit is s (seconds). +# \" .sp +# \" Limitations: +# \" .RS +# \" .IP \(bu +# \" This action affects all the recipients of the message. +# \" .IP \(bu +# \" The delay value has no effect with remote file systems that +# \" don't correctly emulate UNIX local file system semantics. +# \" In that case, the delay will be half of $queue_run_delay +# \" on average. +# \" .IP \(bu +# \" Mail will still be delivered with "sendmail -q", "postfix +# \" flush" or "postqueue -f". +# \" .IP \(bu +# \" Delayed mail increases the amount of disk I/O during deferred +# \" queue scans. When large amounts of mail are queued for +# \" delayed delivery it may be preferable to use the HOLD feature +# \" instead. +# \" .RE +# \" .IP +# \" This feature is available in Postfix 2.3 and later. +# .IP "\fBDISCARD \fIoptional text...\fR +# Claim successful delivery and silently discard the message. +# Log the optional text if specified, otherwise log a generic +# message. +# .sp +# Note: this action currently affects all recipients of the message. +# To discard only one recipient without discarding the entire message, +# use the transport(5) table to direct mail to the discard(8) service. +# .sp +# This feature is available in Postfix 2.0 and later. +# .IP \fBDUNNO\fR +# Pretend that the lookup key was not found. This +# prevents Postfix from trying substrings of the lookup key +# (such as a subdomain name, or a network address subnetwork). +# .sp +# This feature is available in Postfix 2.0 and later. +# .IP "\fBFILTER \fItransport:destination\fR" +# After the message is queued, send the entire message through +# the specified external content filter. The \fItransport\fR +# name specifies the first field of a mail delivery agent +# definition in master.cf; the syntax of the next-hop +# \fIdestination\fR is described in the manual page of the +# corresponding delivery agent. More information about +# external content filters is in the Postfix FILTER_README +# file. +# .sp +# Note 1: do not use $\fInumber\fR regular expression +# substitutions for \fItransport\fR or \fIdestination\fR +# unless you know that the information has a trusted origin. +# .sp +# Note 2: this action overrides the main.cf \fBcontent_filter\fR +# setting, and affects all recipients of the message. In the +# case that multiple \fBFILTER\fR actions fire, only the last +# one is executed. +# .sp +# Note 3: the purpose of the FILTER command is to override +# message routing. To override the recipient's \fItransport\fR +# but not the next-hop \fIdestination\fR, specify an empty +# filter \fIdestination\fR (Postfix 2.7 and later), or specify +# a \fItransport:destination\fR that delivers through a +# different Postfix instance (Postfix 2.6 and earlier). Other +# options are using the recipient-dependent \fBtrans\%port\%_maps\fR +# or the sen\%der-dependent +# \fBsender\%_de\%pen\%dent\%_de\%fault\%_trans\%port\%_maps\fR +# features. +# .sp +# This feature is available in Postfix 2.0 and later. +# .IP "\fBHOLD \fIoptional text...\fR" +# Place the message on the \fBhold\fR queue, where it will +# sit until someone either deletes it or releases it for +# delivery. +# Log the optional text if specified, otherwise log a generic +# message. +# +# Mail that is placed on hold can be examined with the +# \fBpostcat\fR(1) command, and can be destroyed or released with +# the \fBpostsuper\fR(1) command. +# .sp +# Note: use "\fBpostsuper -r\fR" to release mail that was kept on +# hold for a significant fraction of \fB$maximal_queue_lifetime\fR +# or \fB$bounce_queue_lifetime\fR, or longer. Use "\fBpostsuper -H\fR" +# only for mail that will not expire within a few delivery attempts. +# .sp +# Note: this action currently affects all recipients of the message. +# .sp +# This feature is available in Postfix 2.0 and later. +# .IP "\fBPREPEND \fIheadername: headervalue\fR" +# Prepend the specified message header to the message. +# When more than one PREPEND action executes, the first +# prepended header appears before the second etc. prepended +# header. +# .sp +# Note: this action must execute before the message content +# is received; it cannot execute in the context of +# \fBsmtpd_end_of_data_restrictions\fR. +# .sp +# This feature is available in Postfix 2.1 and later. +# .IP "\fBREDIRECT \fIuser@domain\fR" +# After the message is queued, send the message to the specified +# address instead of the intended recipient(s). When multiple +# \fBREDIRECT\fR actions fire, only the last one takes effect. +# .sp +# Note: this action overrides the FILTER action, and currently +# overrides all recipients of the message. +# .sp +# This feature is available in Postfix 2.1 and later. +# .IP "\fBINFO \fIoptional text...\fR +# Log an informational record with the optional text, together +# with client information and if available, with helo, sender, +# recipient and protocol information. +# .sp +# This feature is available in Postfix 3.0 and later. +# .IP "\fBWARN \fIoptional text...\fR +# Log a warning with the optional text, together with client information +# and if available, with helo, sender, recipient and protocol information. +# .sp +# This feature is available in Postfix 2.1 and later. +# ENHANCED STATUS CODES +# .ad +# .fi +# Postfix version 2.3 and later support enhanced status codes +# as defined in RFC 3463. +# When an enhanced status code is specified in an access +# table, it is subject to modification. The following +# transformations are needed when the same access table is +# used for client, helo, sender, or recipient access restrictions; +# they happen regardless of whether Postfix replies to a MAIL +# FROM, RCPT TO or other SMTP command. +# .IP \(bu +# When a sender address matches a REJECT action, the Postfix +# SMTP server will transform a recipient DSN status (e.g., +# 4.1.1-4.1.6) into the corresponding sender DSN status, and +# vice versa. +# .IP \(bu +# When non-address information matches a REJECT action (such +# as the HELO command argument or the client hostname/address), +# the Postfix SMTP server will transform a sender or recipient +# DSN status into a generic non-address DSN status (e.g., +# 4.0.0). +# REGULAR EXPRESSION TABLES +# .ad +# .fi +# This section describes how the table lookups change when the table +# is given in the form of regular expressions. For a description of +# regular expression lookup table syntax, see \fBregexp_table\fR(5) +# or \fBpcre_table\fR(5). +# +# Each pattern is a regular expression that is applied to the entire +# string being looked up. Depending on the application, that string +# is an entire client hostname, an entire client IP address, or an +# entire mail address. Thus, no parent domain or parent network search +# is done, \fIuser@domain\fR mail addresses are not broken up into +# their \fIuser@\fR and \fIdomain\fR constituent parts, nor is +# \fIuser+foo\fR broken up into \fIuser\fR and \fIfoo\fR. +# +# Patterns are applied in the order as specified in the table, until a +# pattern is found that matches the search string. +# +# Actions are the same as with indexed file lookups, with +# the additional feature that parenthesized substrings from the +# pattern can be interpolated as \fB$1\fR, \fB$2\fR and so on. +# TCP-BASED TABLES +# .ad +# .fi +# This section describes how the table lookups change when lookups +# are directed to a TCP-based server. For a description of the TCP +# client/server lookup protocol, see \fBtcp_table\fR(5). +# This feature is not available up to and including Postfix version 2.4. +# +# Each lookup operation uses the entire query string once. +# Depending on the application, that string is an entire client +# hostname, an entire client IP address, or an entire mail address. +# Thus, no parent domain or parent network search is done, +# \fIuser@domain\fR mail addresses are not broken up into +# their \fIuser@\fR and \fIdomain\fR constituent parts, nor is +# \fIuser+foo\fR broken up into \fIuser\fR and \fIfoo\fR. +# +# Actions are the same as with indexed file lookups. +# EXAMPLE +# .ad +# .fi +# The following example uses an indexed file, so that the +# order of table entries does not matter. The example permits +# access by the client at address 1.2.3.4 but rejects all +# other clients in 1.2.3.0/24. Instead of \fBhash\fR lookup +# tables, some systems use \fBdbm\fR. Use the command +# "\fBpostconf -m\fR" to find out what lookup tables Postfix +# supports on your system. +# +# .nf +# .na +# /etc/postfix/main.cf: +# smtpd_client_restrictions = +# check_client_access hash:/etc/postfix/access +# +# /etc/postfix/access: +# 1.2.3 REJECT +# 1.2.3.4 OK +# .fi +# .ad +# +# Execute the command "\fBpostmap /etc/postfix/access\fR" after +# editing the file. +# BUGS +# The table format does not understand quoting conventions. +# SEE ALSO +# postmap(1), Postfix lookup table manager +# smtpd(8), SMTP server +# postconf(5), configuration parameters +# transport(5), transport:nexthop syntax +# README FILES +# .ad +# .fi +# Use "\fBpostconf readme_directory\fR" or +# "\fBpostconf html_directory\fR" to locate this information. +# .na +# .nf +# SMTPD_ACCESS_README, built-in SMTP server access control +# DATABASE_README, Postfix lookup table overview +# LICENSE +# .ad +# .fi +# The Secure Mailer license must be distributed with this software. +# AUTHOR(S) +# Wietse Venema +# IBM T.J. Watson Research +# P.O. Box 704 +# Yorktown Heights, NY 10598, USA +# +# Wietse Venema +# Google, Inc. +# 111 8th Avenue +# New York, NY 10011, USA +#-- |