diff options
Diffstat (limited to '')
| -rw-r--r-- | proto/transport | 306 |
1 files changed, 306 insertions, 0 deletions
diff --git a/proto/transport b/proto/transport new file mode 100644 index 0000000..c5ffff2 --- /dev/null +++ b/proto/transport @@ -0,0 +1,306 @@ +#++ +# NAME +# transport 5 +# SUMMARY +# Postfix transport table format +# SYNOPSIS +# \fBpostmap /etc/postfix/transport\fR +# +# \fBpostmap -q "\fIstring\fB" /etc/postfix/transport\fR +# +# \fBpostmap -q - /etc/postfix/transport <\fIinputfile\fR +# DESCRIPTION +# The optional \fBtransport\fR(5) table specifies a mapping from email +# addresses to message delivery transports and next-hop destinations. +# Message delivery transports such as \fBlocal\fR or \fBsmtp\fR +# are defined in the \fBmaster.cf\fR file, and next-hop +# destinations are typically hosts or domain names. The +# table is searched by the \fBtrivial-rewrite\fR(8) daemon. +# +# This mapping overrides the default \fItransport\fR:\fInexthop\fR +# selection that is built into Postfix: +# .IP "\fBlocal_transport (default: local:$myhostname)\fR" +# This is the default for final delivery to domains listed +# with \fBmydestination\fR, and for [\fIipaddress\fR] +# destinations that match \fB$inet_interfaces\fR or +# \fB$proxy_interfaces\fR. The default \fInexthop\fR destination +# is the MTA hostname. +# .IP "\fBvirtual_transport (default: virtual:)\fR" +# This is the default for final delivery to domains listed +# with \fBvirtual_mailbox_domains\fR. The default \fInexthop\fR +# destination is the recipient domain. +# .IP "\fBrelay_transport (default: relay:)\fR" +# This is the default for remote delivery to domains listed +# with \fBrelay_domains\fR. In order of decreasing precedence, +# the \fInexthop\fR destination is taken from \fBrelay_transport\fR, +# \fBsender_dependent_relayhost_maps\fR, \fBrelayhost\fR, or from the +# recipient domain. +# .IP "\fBdefault_transport (default: smtp:)\fR" +# This is the default for remote delivery to other destinations. +# In order of decreasing precedence, the \fInexthop\fR +# destination is taken from \fBsender_dependent_default_transport_maps, +# \fBdefault_transport\fR, \fBsender_dependent_relayhost_maps\fR, +# \fBrelayhost\fR, or from the recipient domain. +# .PP +# Normally, the \fBtransport\fR(5) table is specified as a text file +# that serves as input to the \fBpostmap\fR(1) command. +# The result, an indexed file in \fBdbm\fR or \fBdb\fR format, is used +# for fast searching by the mail system. Execute the command +# "\fBpostmap /etc/postfix/transport\fR" to rebuild an indexed +# file after changing the corresponding transport table. +# +# When the table is provided via other means such as NIS, LDAP +# or SQL, the same lookups are done as for ordinary indexed files. +# +# Alternatively, the table can be provided as a regular-expression +# map where patterns are given as regular expressions, or lookups +# can be directed to a TCP-based server. In those case, the lookups +# are done in a slightly different way as described below under +# "REGULAR EXPRESSION TABLES" or "TCP-BASED TABLES". +# CASE FOLDING +# .ad +# .fi +# The search string is folded to lowercase before database +# lookup. As of Postfix 2.3, the search string is not case +# folded with database types such as regexp: or pcre: whose +# lookup fields can match both upper and lower case. +# TABLE FORMAT +# .ad +# .fi +# The input format for the \fBpostmap\fR(1) command is as follows: +# .IP "\fIpattern result\fR" +# When \fIpattern\fR matches the recipient address or domain, use the +# corresponding \fIresult\fR. +# .IP "blank lines and comments" +# Empty lines and whitespace-only lines are ignored, as +# are lines whose first non-whitespace character is a `#'. +# .IP "multi-line text" +# A logical line starts with non-whitespace text. A line that +# starts with whitespace continues a logical line. +# .PP +# The \fIpattern\fR specifies an email address, a domain name, or +# a domain name hierarchy, as described in section "TABLE +# SEARCH ORDER". +# +# The \fIresult\fR is of the form \fItransport:nexthop\fR and +# specifies how or where to deliver mail. This is described in +# section "RESULT FORMAT". +# TABLE SEARCH ORDER +# .ad +# .fi +# With lookups from indexed files such as DB or DBM, or from networked +# tables such as NIS, LDAP or SQL, patterns are tried in the order as +# listed below: +# .IP "\fIuser+extension@domain transport\fR:\fInexthop\fR" +# Deliver mail for \fIuser+extension@domain\fR through +# \fItransport\fR to +# \fInexthop\fR. +# .IP "\fIuser@domain transport\fR:\fInexthop\fR" +# Deliver mail for \fIuser@domain\fR through \fItransport\fR to +# \fInexthop\fR. +# .IP "\fIdomain transport\fR:\fInexthop\fR" +# Deliver mail for \fIdomain\fR through \fItransport\fR to +# \fInexthop\fR. +# .IP "\fI.domain transport\fR:\fInexthop\fR" +# Deliver mail for any subdomain of \fIdomain\fR through +# \fItransport\fR to \fInexthop\fR. This applies only when the +# string \fBtransport_maps\fR is not listed in the +# \fBparent_domain_matches_subdomains\fR configuration setting. +# Otherwise, a domain name matches itself and its subdomains. +# .IP "\fB*\fI transport\fR:\fInexthop\fR" +# The special pattern \fB*\fR represents any address (i.e. it +# functions as the wild-card pattern, and is unique to Postfix +# transport tables). +# .PP +# Note 1: the null recipient address is looked up as +# \fB$empty_address_recipient\fR@\fB$myhostname\fR (default: +# mailer-daemon@hostname). +# +# Note 2: \fIuser@domain\fR or \fIuser+extension@domain\fR +# lookup is available in Postfix 2.0 and later. +# RESULT FORMAT +# .ad +# .fi +# The lookup result is of the form \fItransport\fB:\fInexthop\fR. +# The \fItransport\fR field specifies a mail delivery transport +# such as \fBsmtp\fR or \fBlocal\fR. The \fInexthop\fR field +# specifies where and how to deliver mail. +# +# The transport field specifies the name of a mail delivery transport +# (the first name of a mail delivery service entry in the Postfix +# \fBmaster.cf\fR file). +# +# The nexthop field usually specifies one recipient domain +# or hostname. In the case of the Postfix SMTP/LMTP client, +# the nexthop field may contain a list of nexthop destinations +# separated by comma or whitespace (Postfix 3.5 and later). +# +# The syntax of a nexthop destination is transport dependent. +# With SMTP, specify a service on a non-default +# port as \fIhost\fR:\fIservice\fR, and disable MX (mail exchanger) +# DNS lookups with [\fIhost\fR] or [\fIhost\fR]:\fIport\fR. The [] form +# is required when you specify an IP address instead of a hostname. +# +# A null \fItransport\fR and null \fInexthop\fR field means "do +# not change": use the delivery transport and nexthop information +# that would be used when the entire transport table did not exist. +# +# A non-null \fItransport\fR field with a null \fInexthop\fR field +# resets the nexthop information to the recipient domain. +# +# A null \fItransport\fR field with non-null \fInexthop\fR field +# does not modify the transport information. +# EXAMPLES +# .ad +# .fi +# In order to deliver internal mail directly, while using a +# mail relay for all other mail, specify a null entry for +# internal destinations (do not change the delivery transport or +# the nexthop information) and specify a wildcard for all other +# destinations. +# +# .nf +# \fB\&my.domain :\fR +# \fB\&.my.domain :\fR +# \fB* smtp:outbound-relay.my.domain\fR +# .fi +# +# In order to send mail for \fBexample.com\fR and its subdomains +# via the \fBuucp\fR transport to the UUCP host named \fBexample\fR: +# +# .nf +# \fBexample.com uucp:example\fR +# \fB\&.example.com uucp:example\fR +# .fi +# +# When no nexthop host name is specified, the destination domain +# name is used instead. For example, the following directs mail for +# \fIuser\fR@\fBexample.com\fR via the \fBslow\fR transport to a mail +# exchanger for \fBexample.com\fR. The \fBslow\fR transport could be +# configured to run at most one delivery process at a time: +# +# .nf +# \fBexample.com slow:\fR +# .fi +# +# When no transport is specified, Postfix uses the transport that +# matches the address domain class (see DESCRIPTION +# above). The following sends all mail for \fBexample.com\fR and its +# subdomains to host \fBgateway.example.com\fR: +# +# .nf +# \fBexample.com :[gateway.example.com]\fR +# \fB\&.example.com :[gateway.example.com]\fR +# .fi +# +# In the above example, the [] suppress MX lookups. +# This prevents mail routing loops when your machine is primary MX +# host for \fBexample.com\fR. +# +# In the case of delivery via SMTP or LMTP, one may specify +# \fIhost\fR:\fIservice\fR instead of just a host: +# +# .nf +# \fBexample.com smtp:bar.example:2025\fR +# .fi +# +# This directs mail for \fIuser\fR@\fBexample.com\fR to host \fBbar.example\fR +# port \fB2025\fR. Instead of a numerical port a symbolic name may be +# used. Specify [] around the hostname if MX lookups must be disabled. +# +# Deliveries via SMTP or LMTP support multiple destinations +# (Postfix >= 3.5): +# +# .nf +# \fBexample.com smtp:bar.example, foo.example\fR +# .fi +# +# This tries to deliver to \fBbar.example\fR before trying +# to deliver to \fBfoo.example\fR. +# +# The error mailer can be used to bounce mail: +# +# .nf +# \fB\&.example.com error:mail for *.example.com is not deliverable\fR +# .fi +# +# This causes all mail for \fIuser\fR@\fIanything\fB.example.com\fR +# to be bounced. +# REGULAR EXPRESSION TABLES +# .ad +# .fi +# This section describes how the table lookups change when the table +# is given in the form of regular expressions. For a description of +# regular expression lookup table syntax, see \fBregexp_table\fR(5) +# or \fBpcre_table\fR(5). +# +# Each pattern is a regular expression that is applied to the entire +# address being looked up. Thus, \fIsome.domain.hierarchy\fR is not +# looked up via its parent domains, +# nor is \fIuser+foo@domain\fR looked up as \fIuser@domain\fR. +# +# Patterns are applied in the order as specified in the table, until a +# pattern is found that matches the search string. +# +# The \fBtrivial-rewrite\fR(8) server disallows regular +# expression substitution of $1 etc. in regular expression +# lookup tables, because that could open a security hole +# (Postfix version 2.3 and later). +# TCP-BASED TABLES +# .ad +# .fi +# This section describes how the table lookups change when lookups +# are directed to a TCP-based server. For a description of the TCP +# client/server lookup protocol, see \fBtcp_table\fR(5). +# This feature is not available up to and including Postfix version 2.4. +# +# Each lookup operation uses the entire recipient address once. Thus, +# \fIsome.domain.hierarchy\fR is not looked up via its parent domains, +# nor is \fIuser+foo@domain\fR looked up as \fIuser@domain\fR. +# +# Results are the same as with indexed file lookups. +# CONFIGURATION PARAMETERS +# .ad +# .fi +# The following \fBmain.cf\fR parameters are especially relevant. +# The text below provides only a parameter summary. See +# \fBpostconf\fR(5) for more details including examples. +# .IP "\fBempty_address_recipient (MAILER-DAEMON)\fR" +# The recipient of mail addressed to the null address. +# .IP "\fBparent_domain_matches_subdomains (see 'postconf -d' output)\fR" +# A list of Postfix features where the pattern "example.com" also +# matches subdomains of example.com, +# instead of requiring an explicit ".example.com" pattern. +# .IP "\fBtransport_maps (empty)\fR" +# Optional lookup tables with mappings from recipient address to +# (message delivery transport, next-hop destination). +# SEE ALSO +# trivial-rewrite(8), rewrite and resolve addresses +# master(5), master.cf file format +# postconf(5), configuration parameters +# postmap(1), Postfix lookup table manager +# README FILES +# .ad +# .fi +# Use "\fBpostconf readme_directory\fR" or +# "\fBpostconf html_directory\fR" to locate this information. +# .na +# .nf +# ADDRESS_REWRITING_README, address rewriting guide +# DATABASE_README, Postfix lookup table overview +# FILTER_README, external content filter +# LICENSE +# .ad +# .fi +# The Secure Mailer license must be distributed with this software. +# AUTHOR(S) +# Wietse Venema +# IBM T.J. Watson Research +# P.O. Box 704 +# Yorktown Heights, NY 10598, USA +# +# Wietse Venema +# Google, Inc. +# 111 8th Avenue +# New York, NY 10011, USA +#-- |