diff options
Diffstat (limited to '')
| -rw-r--r-- | doc/src/sgml/mvcc.sgml | 1943 |
1 files changed, 1943 insertions, 0 deletions
diff --git a/doc/src/sgml/mvcc.sgml b/doc/src/sgml/mvcc.sgml new file mode 100644 index 0000000..f8f83d4 --- /dev/null +++ b/doc/src/sgml/mvcc.sgml @@ -0,0 +1,1943 @@ +<!-- doc/src/sgml/mvcc.sgml --> + + <chapter id="mvcc"> + <title>Concurrency Control</title> + + <indexterm> + <primary>concurrency</primary> + </indexterm> + + <para> + This chapter describes the behavior of the + <productname>PostgreSQL</productname> database system when two or + more sessions try to access the same data at the same time. The + goals in that situation are to allow efficient access for all + sessions while maintaining strict data integrity. Every developer + of database applications should be familiar with the topics covered + in this chapter. + </para> + + <sect1 id="mvcc-intro"> + <title>Introduction</title> + + <indexterm> + <primary>Multiversion Concurrency Control</primary> + </indexterm> + + <indexterm> + <primary>MVCC</primary> + </indexterm> + + <indexterm> + <primary>Serializable Snapshot Isolation</primary> + </indexterm> + + <indexterm> + <primary>SSI</primary> + </indexterm> + + <para> + <productname>PostgreSQL</productname> provides a rich set of tools + for developers to manage concurrent access to data. Internally, + data consistency is maintained by using a multiversion + model (Multiversion Concurrency Control, <acronym>MVCC</acronym>). + This means that each SQL statement sees + a snapshot of data (a <firstterm>database version</firstterm>) + as it was some + time ago, regardless of the current state of the underlying data. + This prevents statements from viewing inconsistent data produced + by concurrent transactions performing updates on the same + data rows, providing <firstterm>transaction isolation</firstterm> + for each database session. <acronym>MVCC</acronym>, by eschewing + the locking methodologies of traditional database systems, + minimizes lock contention in order to allow for reasonable + performance in multiuser environments. + </para> + + <para> + The main advantage of using the <acronym>MVCC</acronym> model of + concurrency control rather than locking is that in + <acronym>MVCC</acronym> locks acquired for querying (reading) data + do not conflict with locks acquired for writing data, and so + reading never blocks writing and writing never blocks reading. + <productname>PostgreSQL</productname> maintains this guarantee + even when providing the strictest level of transaction + isolation through the use of an innovative <firstterm>Serializable + Snapshot Isolation</firstterm> (<acronym>SSI</acronym>) level. + </para> + + <para> + Table- and row-level locking facilities are also available in + <productname>PostgreSQL</productname> for applications which don't + generally need full transaction isolation and prefer to explicitly + manage particular points of conflict. However, proper + use of <acronym>MVCC</acronym> will generally provide better + performance than locks. In addition, application-defined advisory + locks provide a mechanism for acquiring locks that are not tied + to a single transaction. + </para> + </sect1> + + <sect1 id="transaction-iso"> + <title>Transaction Isolation</title> + + <indexterm> + <primary>transaction isolation</primary> + </indexterm> + + <para> + The <acronym>SQL</acronym> standard defines four levels of + transaction isolation. The most strict is Serializable, + which is defined by the standard in a paragraph which says that any + concurrent execution of a set of Serializable transactions is guaranteed + to produce the same effect as running them one at a time in some order. + The other three levels are defined in terms of phenomena, resulting from + interaction between concurrent transactions, which must not occur at + each level. The standard notes that due to the definition of + Serializable, none of these phenomena are possible at that level. (This + is hardly surprising -- if the effect of the transactions must be + consistent with having been run one at a time, how could you see any + phenomena caused by interactions?) + </para> + + <para> + The phenomena which are prohibited at various levels are: + + <variablelist> + <varlistentry> + <term> + dirty read + <indexterm><primary>dirty read</primary></indexterm> + </term> + <listitem> + <para> + A transaction reads data written by a concurrent uncommitted transaction. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + nonrepeatable read + <indexterm><primary>nonrepeatable read</primary></indexterm> + </term> + <listitem> + <para> + A transaction re-reads data it has previously read and finds that data + has been modified by another transaction (that committed since the + initial read). + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + phantom read + <indexterm><primary>phantom read</primary></indexterm> + </term> + <listitem> + <para> + A transaction re-executes a query returning a set of rows that satisfy a + search condition and finds that the set of rows satisfying the condition + has changed due to another recently-committed transaction. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + serialization anomaly + <indexterm><primary>serialization anomaly</primary></indexterm> + </term> + <listitem> + <para> + The result of successfully committing a group of transactions + is inconsistent with all possible orderings of running those + transactions one at a time. + </para> + </listitem> + </varlistentry> + </variablelist> + </para> + + <para> + <indexterm> + <primary>transaction isolation level</primary> + </indexterm> + The SQL standard and PostgreSQL-implemented transaction isolation levels + are described in <xref linkend="mvcc-isolevel-table"/>. + </para> + + <table tocentry="1" id="mvcc-isolevel-table"> + <title>Transaction Isolation Levels</title> + <tgroup cols="5"> + <thead> + <row> + <entry> + Isolation Level + </entry> + <entry> + Dirty Read + </entry> + <entry> + Nonrepeatable Read + </entry> + <entry> + Phantom Read + </entry> + <entry> + Serialization Anomaly + </entry> + </row> + </thead> + <tbody> + <row> + <entry> + Read uncommitted + </entry> + <entry> + Allowed, but not in PG + </entry> + <entry> + Possible + </entry> + <entry> + Possible + </entry> + <entry> + Possible + </entry> + </row> + + <row> + <entry> + Read committed + </entry> + <entry> + Not possible + </entry> + <entry> + Possible + </entry> + <entry> + Possible + </entry> + <entry> + Possible + </entry> + </row> + + <row> + <entry> + Repeatable read + </entry> + <entry> + Not possible + </entry> + <entry> + Not possible + </entry> + <entry> + Allowed, but not in PG + </entry> + <entry> + Possible + </entry> + </row> + + <row> + <entry> + Serializable + </entry> + <entry> + Not possible + </entry> + <entry> + Not possible + </entry> + <entry> + Not possible + </entry> + <entry> + Not possible + </entry> + </row> + </tbody> + </tgroup> + </table> + + <para> + In <productname>PostgreSQL</productname>, you can request any of + the four standard transaction isolation levels, but internally only + three distinct isolation levels are implemented, i.e., PostgreSQL's + Read Uncommitted mode behaves like Read Committed. This is because + it is the only sensible way to map the standard isolation levels to + PostgreSQL's multiversion concurrency control architecture. + </para> + + <para> + The table also shows that PostgreSQL's Repeatable Read implementation + does not allow phantom reads. This is acceptable under the SQL + standard because the standard specifies which anomalies must + <emphasis>not</emphasis> occur at certain isolation levels; higher + guarantees are acceptable. + The behavior of the available isolation levels is detailed in the + following subsections. + </para> + + <para> + To set the transaction isolation level of a transaction, use the + command <xref linkend="sql-set-transaction"/>. + </para> + + <important> + <para> + Some <productname>PostgreSQL</productname> data types and functions have + special rules regarding transactional behavior. In particular, changes + made to a sequence (and therefore the counter of a + column declared using <type>serial</type>) are immediately visible + to all other transactions and are not rolled back if the transaction + that made the changes aborts. See <xref linkend="functions-sequence"/> + and <xref linkend="datatype-serial"/>. + </para> + </important> + + <sect2 id="xact-read-committed"> + <title>Read Committed Isolation Level</title> + + <indexterm> + <primary>transaction isolation level</primary> + <secondary>read committed</secondary> + </indexterm> + + <indexterm> + <primary>read committed</primary> + </indexterm> + + <para> + <firstterm>Read Committed</firstterm> is the default isolation + level in <productname>PostgreSQL</productname>. When a transaction + uses this isolation level, a <command>SELECT</command> query + (without a <literal>FOR UPDATE/SHARE</literal> clause) sees only data + committed before the query began; it never sees either uncommitted + data or changes committed by concurrent transactions during the query's + execution. In effect, a <command>SELECT</command> query sees + a snapshot of the database as of the instant the query begins to + run. However, <command>SELECT</command> does see the effects + of previous updates executed within its own transaction, even + though they are not yet committed. Also note that two successive + <command>SELECT</command> commands can see different data, even + though they are within a single transaction, if other transactions + commit changes after the first <command>SELECT</command> starts and + before the second <command>SELECT</command> starts. + </para> + + <para> + <command>UPDATE</command>, <command>DELETE</command>, <command>SELECT + FOR UPDATE</command>, and <command>SELECT FOR SHARE</command> commands + behave the same as <command>SELECT</command> + in terms of searching for target rows: they will only find target rows + that were committed as of the command start time. However, such a target + row might have already been updated (or deleted or locked) by + another concurrent transaction by the time it is found. In this case, the + would-be updater will wait for the first updating transaction to commit or + roll back (if it is still in progress). If the first updater rolls back, + then its effects are negated and the second updater can proceed with + updating the originally found row. If the first updater commits, the + second updater will ignore the row if the first updater deleted it, + otherwise it will attempt to apply its operation to the updated version of + the row. The search condition of the command (the <literal>WHERE</literal> clause) is + re-evaluated to see if the updated version of the row still matches the + search condition. If so, the second updater proceeds with its operation + using the updated version of the row. In the case of + <command>SELECT FOR UPDATE</command> and <command>SELECT FOR + SHARE</command>, this means it is the updated version of the row that is + locked and returned to the client. + </para> + + <para> + <command>INSERT</command> with an <literal>ON CONFLICT DO UPDATE</literal> clause + behaves similarly. In Read Committed mode, each row proposed for insertion + will either insert or update. Unless there are unrelated errors, one of + those two outcomes is guaranteed. If a conflict originates in another + transaction whose effects are not yet visible to the <command>INSERT</command>, + the <command>UPDATE</command> clause will affect that row, + even though possibly <emphasis>no</emphasis> version of that row is + conventionally visible to the command. + </para> + + <para> + <command>INSERT</command> with an <literal>ON CONFLICT DO + NOTHING</literal> clause may have insertion not proceed for a row due to + the outcome of another transaction whose effects are not visible + to the <command>INSERT</command> snapshot. Again, this is only + the case in Read Committed mode. + </para> + + <para> + <command>MERGE</command> allows the user to specify various + combinations of <command>INSERT</command>, <command>UPDATE</command> + and <command>DELETE</command> subcommands. A <command>MERGE</command> + command with both <command>INSERT</command> and <command>UPDATE</command> + subcommands looks similar to <command>INSERT</command> with an + <literal>ON CONFLICT DO UPDATE</literal> clause but does not + guarantee that either <command>INSERT</command> or + <command>UPDATE</command> will occur. + If <command>MERGE</command> attempts an <command>UPDATE</command> or + <command>DELETE</command> and the row is concurrently updated but + the join condition still passes for the current target and the + current source tuple, then <command>MERGE</command> will behave + the same as the <command>UPDATE</command> or + <command>DELETE</command> commands and perform its action on the + updated version of the row. However, because <command>MERGE</command> + can specify several actions and they can be conditional, the + conditions for each action are re-evaluated on the updated version of + the row, starting from the first action, even if the action that had + originally matched appears later in the list of actions. + On the other hand, if the row is concurrently updated or deleted so + that the join condition fails, then <command>MERGE</command> will + evaluate the condition's <literal>NOT MATCHED</literal> actions next, + and execute the first one that succeeds. + If <command>MERGE</command> attempts an <command>INSERT</command> + and a unique index is present and a duplicate row is concurrently + inserted, then a uniqueness violation error is raised; + <command>MERGE</command> does not attempt to avoid such + errors by restarting evaluation of <literal>MATCHED</literal> + conditions. + </para> + + <para> + Because of the above rules, it is possible for an updating command to see + an inconsistent snapshot: it can see the effects of concurrent updating + commands on the same rows it is trying to update, but it + does not see effects of those commands on other rows in the database. + This behavior makes Read Committed mode unsuitable for commands that + involve complex search conditions; however, it is just right for simpler + cases. For example, consider updating bank balances with transactions + like: + +<screen> +BEGIN; +UPDATE accounts SET balance = balance + 100.00 WHERE acctnum = 12345; +UPDATE accounts SET balance = balance - 100.00 WHERE acctnum = 7534; +COMMIT; +</screen> + + If two such transactions concurrently try to change the balance of account + 12345, we clearly want the second transaction to start with the updated + version of the account's row. Because each command is affecting only a + predetermined row, letting it see the updated version of the row does + not create any troublesome inconsistency. + </para> + + <para> + More complex usage can produce undesirable results in Read Committed + mode. For example, consider a <command>DELETE</command> command + operating on data that is being both added and removed from its + restriction criteria by another command, e.g., assume + <literal>website</literal> is a two-row table with + <literal>website.hits</literal> equaling <literal>9</literal> and + <literal>10</literal>: + +<screen> +BEGIN; +UPDATE website SET hits = hits + 1; +-- run from another session: DELETE FROM website WHERE hits = 10; +COMMIT; +</screen> + + The <command>DELETE</command> will have no effect even though + there is a <literal>website.hits = 10</literal> row before and + after the <command>UPDATE</command>. This occurs because the + pre-update row value <literal>9</literal> is skipped, and when the + <command>UPDATE</command> completes and <command>DELETE</command> + obtains a lock, the new row value is no longer <literal>10</literal> but + <literal>11</literal>, which no longer matches the criteria. + </para> + + <para> + Because Read Committed mode starts each command with a new snapshot + that includes all transactions committed up to that instant, + subsequent commands in the same transaction will see the effects + of the committed concurrent transaction in any case. The point + at issue above is whether or not a <emphasis>single</emphasis> command + sees an absolutely consistent view of the database. + </para> + + <para> + The partial transaction isolation provided by Read Committed mode + is adequate for many applications, and this mode is fast and simple + to use; however, it is not sufficient for all cases. Applications + that do complex queries and updates might require a more rigorously + consistent view of the database than Read Committed mode provides. + </para> + </sect2> + + <sect2 id="xact-repeatable-read"> + <title>Repeatable Read Isolation Level</title> + + <indexterm> + <primary>transaction isolation level</primary> + <secondary>repeatable read</secondary> + </indexterm> + + <indexterm> + <primary>repeatable read</primary> + </indexterm> + + <para> + The <firstterm>Repeatable Read</firstterm> isolation level only sees + data committed before the transaction began; it never sees either + uncommitted data or changes committed by concurrent transactions during + the transaction's execution. (However, each query does see the + effects of previous updates executed within its own transaction, + even though they are not yet committed.) This is a stronger + guarantee than is required by the <acronym>SQL</acronym> standard + for this isolation level, and prevents all of the phenomena described + in <xref linkend="mvcc-isolevel-table"/> except for serialization + anomalies. As mentioned above, this is + specifically allowed by the standard, which only describes the + <emphasis>minimum</emphasis> protections each isolation level must + provide. + </para> + + <para> + This level is different from Read Committed in that a query in a + repeatable read transaction sees a snapshot as of the start of the + first non-transaction-control statement in the + <emphasis>transaction</emphasis>, not as of the start + of the current statement within the transaction. Thus, successive + <command>SELECT</command> commands within a <emphasis>single</emphasis> + transaction see the same data, i.e., they do not see changes made by + other transactions that committed after their own transaction started. + </para> + + <para> + Applications using this level must be prepared to retry transactions + due to serialization failures. + </para> + + <para> + <command>UPDATE</command>, <command>DELETE</command>, + <command>MERGE</command>, <command>SELECT FOR UPDATE</command>, + and <command>SELECT FOR SHARE</command> commands + behave the same as <command>SELECT</command> + in terms of searching for target rows: they will only find target rows + that were committed as of the transaction start time. However, such a + target row might have already been updated (or deleted or locked) by + another concurrent transaction by the time it is found. In this case, the + repeatable read transaction will wait for the first updating transaction to commit or + roll back (if it is still in progress). If the first updater rolls back, + then its effects are negated and the repeatable read transaction can proceed + with updating the originally found row. But if the first updater commits + (and actually updated or deleted the row, not just locked it) + then the repeatable read transaction will be rolled back with the message + +<screen> +ERROR: could not serialize access due to concurrent update +</screen> + + because a repeatable read transaction cannot modify or lock rows changed by + other transactions after the repeatable read transaction began. + </para> + + <para> + When an application receives this error message, it should abort + the current transaction and retry the whole transaction from + the beginning. The second time through, the transaction will see the + previously-committed change as part of its initial view of the database, + so there is no logical conflict in using the new version of the row + as the starting point for the new transaction's update. + </para> + + <para> + Note that only updating transactions might need to be retried; read-only + transactions will never have serialization conflicts. + </para> + + <para> + The Repeatable Read mode provides a rigorous guarantee that each + transaction sees a completely stable view of the database. However, + this view will not necessarily always be consistent with some serial + (one at a time) execution of concurrent transactions of the same level. + For example, even a read-only transaction at this level may see a + control record updated to show that a batch has been completed but + <emphasis>not</emphasis> see one of the detail records which is logically + part of the batch because it read an earlier revision of the control + record. Attempts to enforce business rules by transactions running at + this isolation level are not likely to work correctly without careful use + of explicit locks to block conflicting transactions. + </para> + + <para> + The Repeatable Read isolation level is implemented using a technique + known in academic database literature and in some other database products + as <firstterm>Snapshot Isolation</firstterm>. Differences in behavior + and performance may be observed when compared with systems that use a + traditional locking technique that reduces concurrency. Some other + systems may even offer Repeatable Read and Snapshot Isolation as distinct + isolation levels with different behavior. The permitted phenomena that + distinguish the two techniques were not formalized by database researchers + until after the SQL standard was developed, and are outside the scope of + this manual. For a full treatment, please see + <xref linkend="berenson95"/>. + </para> + + <note> + <para> + Prior to <productname>PostgreSQL</productname> version 9.1, a request + for the Serializable transaction isolation level provided exactly the + same behavior described here. To retain the legacy Serializable + behavior, Repeatable Read should now be requested. + </para> + </note> + </sect2> + + <sect2 id="xact-serializable"> + <title>Serializable Isolation Level</title> + + <indexterm> + <primary>transaction isolation level</primary> + <secondary>serializable</secondary> + </indexterm> + + <indexterm> + <primary>serializable</primary> + </indexterm> + + <indexterm> + <primary>predicate locking</primary> + </indexterm> + + <indexterm> + <primary>serialization anomaly</primary> + </indexterm> + + <para> + The <firstterm>Serializable</firstterm> isolation level provides + the strictest transaction isolation. This level emulates serial + transaction execution for all committed transactions; + as if transactions had been executed one after another, serially, + rather than concurrently. However, like the Repeatable Read level, + applications using this level must + be prepared to retry transactions due to serialization failures. + In fact, this isolation level works exactly the same as Repeatable + Read except that it also monitors for conditions which could make + execution of a concurrent set of serializable transactions behave + in a manner inconsistent with all possible serial (one at a time) + executions of those transactions. This monitoring does not + introduce any blocking beyond that present in repeatable read, but + there is some overhead to the monitoring, and detection of the + conditions which could cause a + <firstterm>serialization anomaly</firstterm> will trigger a + <firstterm>serialization failure</firstterm>. + </para> + + <para> + As an example, + consider a table <structname>mytab</structname>, initially containing: +<screen> + class | value +-------+------- + 1 | 10 + 1 | 20 + 2 | 100 + 2 | 200 +</screen> + Suppose that serializable transaction A computes: +<screen> +SELECT SUM(value) FROM mytab WHERE class = 1; +</screen> + and then inserts the result (30) as the <structfield>value</structfield> in a + new row with <structfield>class</structfield><literal> = 2</literal>. Concurrently, serializable + transaction B computes: +<screen> +SELECT SUM(value) FROM mytab WHERE class = 2; +</screen> + and obtains the result 300, which it inserts in a new row with + <structfield>class</structfield><literal> = 1</literal>. Then both transactions try to commit. + If either transaction were running at the Repeatable Read isolation level, + both would be allowed to commit; but since there is no serial order of execution + consistent with the result, using Serializable transactions will allow one + transaction to commit and will roll the other back with this message: + +<screen> +ERROR: could not serialize access due to read/write dependencies among transactions +</screen> + + This is because if A had + executed before B, B would have computed the sum 330, not 300, and + similarly the other order would have resulted in a different sum + computed by A. + </para> + + <para> + When relying on Serializable transactions to prevent anomalies, it is + important that any data read from a permanent user table not be + considered valid until the transaction which read it has successfully + committed. This is true even for read-only transactions, except that + data read within a <firstterm>deferrable</firstterm> read-only + transaction is known to be valid as soon as it is read, because such a + transaction waits until it can acquire a snapshot guaranteed to be free + from such problems before starting to read any data. In all other cases + applications must not depend on results read during a transaction that + later aborted; instead, they should retry the transaction until it + succeeds. + </para> + + <para> + To guarantee true serializability <productname>PostgreSQL</productname> + uses <firstterm>predicate locking</firstterm>, which means that it keeps locks + which allow it to determine when a write would have had an impact on + the result of a previous read from a concurrent transaction, had it run + first. In <productname>PostgreSQL</productname> these locks do not + cause any blocking and therefore can <emphasis>not</emphasis> play any part in + causing a deadlock. They are used to identify and flag dependencies + among concurrent Serializable transactions which in certain combinations + can lead to serialization anomalies. In contrast, a Read Committed or + Repeatable Read transaction which wants to ensure data consistency may + need to take out a lock on an entire table, which could block other + users attempting to use that table, or it may use <literal>SELECT FOR + UPDATE</literal> or <literal>SELECT FOR SHARE</literal> which not only + can block other transactions but cause disk access. + </para> + + <para> + Predicate locks in <productname>PostgreSQL</productname>, like in most + other database systems, are based on data actually accessed by a + transaction. These will show up in the + <link linkend="view-pg-locks"><structname>pg_locks</structname></link> + system view with a <literal>mode</literal> of <literal>SIReadLock</literal>. The + particular locks + acquired during execution of a query will depend on the plan used by + the query, and multiple finer-grained locks (e.g., tuple locks) may be + combined into fewer coarser-grained locks (e.g., page locks) during the + course of the transaction to prevent exhaustion of the memory used to + track the locks. A <literal>READ ONLY</literal> transaction may be able to + release its SIRead locks before completion, if it detects that no + conflicts can still occur which could lead to a serialization anomaly. + In fact, <literal>READ ONLY</literal> transactions will often be able to + establish that fact at startup and avoid taking any predicate locks. + If you explicitly request a <literal>SERIALIZABLE READ ONLY DEFERRABLE</literal> + transaction, it will block until it can establish this fact. (This is + the <emphasis>only</emphasis> case where Serializable transactions block but + Repeatable Read transactions don't.) On the other hand, SIRead locks + often need to be kept past transaction commit, until overlapping read + write transactions complete. + </para> + + <para> + Consistent use of Serializable transactions can simplify development. + The guarantee that any set of successfully committed concurrent + Serializable transactions will have the same effect as if they were run + one at a time means that if you can demonstrate that a single transaction, + as written, will do the right thing when run by itself, you can have + confidence that it will do the right thing in any mix of Serializable + transactions, even without any information about what those other + transactions might do, or it will not successfully commit. It is + important that an environment which uses this technique have a + generalized way of handling serialization failures (which always return + with an SQLSTATE value of '40001'), because it will be very hard to + predict exactly which transactions might contribute to the read/write + dependencies and need to be rolled back to prevent serialization + anomalies. The monitoring of read/write dependencies has a cost, as does + the restart of transactions which are terminated with a serialization + failure, but balanced against the cost and blocking involved in use of + explicit locks and <literal>SELECT FOR UPDATE</literal> or <literal>SELECT FOR + SHARE</literal>, Serializable transactions are the best performance choice + for some environments. + </para> + + <para> + While <productname>PostgreSQL</productname>'s Serializable transaction isolation + level only allows concurrent transactions to commit if it can prove there + is a serial order of execution that would produce the same effect, it + doesn't always prevent errors from being raised that would not occur in + true serial execution. In particular, it is possible to see unique + constraint violations caused by conflicts with overlapping Serializable + transactions even after explicitly checking that the key isn't present + before attempting to insert it. This can be avoided by making sure + that <emphasis>all</emphasis> Serializable transactions that insert potentially + conflicting keys explicitly check if they can do so first. For example, + imagine an application that asks the user for a new key and then checks + that it doesn't exist already by trying to select it first, or generates + a new key by selecting the maximum existing key and adding one. If some + Serializable transactions insert new keys directly without following this + protocol, unique constraints violations might be reported even in cases + where they could not occur in a serial execution of the concurrent + transactions. + </para> + + <para> + For optimal performance when relying on Serializable transactions for + concurrency control, these issues should be considered: + + <itemizedlist> + <listitem> + <para> + Declare transactions as <literal>READ ONLY</literal> when possible. + </para> + </listitem> + <listitem> + <para> + Control the number of active connections, using a connection pool if + needed. This is always an important performance consideration, but + it can be particularly important in a busy system using Serializable + transactions. + </para> + </listitem> + <listitem> + <para> + Don't put more into a single transaction than needed for integrity + purposes. + </para> + </listitem> + <listitem> + <para> + Don't leave connections dangling <quote>idle in transaction</quote> + longer than necessary. The configuration parameter + <xref linkend="guc-idle-in-transaction-session-timeout"/> may be used to + automatically disconnect lingering sessions. + </para> + </listitem> + <listitem> + <para> + Eliminate explicit locks, <literal>SELECT FOR UPDATE</literal>, and + <literal>SELECT FOR SHARE</literal> where no longer needed due to the + protections automatically provided by Serializable transactions. + </para> + </listitem> + <listitem> + <para> + When the system is forced to combine multiple page-level predicate + locks into a single relation-level predicate lock because the predicate + lock table is short of memory, an increase in the rate of serialization + failures may occur. You can avoid this by increasing + <xref linkend="guc-max-pred-locks-per-transaction"/>, + <xref linkend="guc-max-pred-locks-per-relation"/>, and/or + <xref linkend="guc-max-pred-locks-per-page"/>. + </para> + </listitem> + <listitem> + <para> + A sequential scan will always necessitate a relation-level predicate + lock. This can result in an increased rate of serialization failures. + It may be helpful to encourage the use of index scans by reducing + <xref linkend="guc-random-page-cost"/> and/or increasing + <xref linkend="guc-cpu-tuple-cost"/>. Be sure to weigh any decrease + in transaction rollbacks and restarts against any overall change in + query execution time. + </para> + </listitem> + </itemizedlist> + </para> + + <para> + The Serializable isolation level is implemented using a technique known + in academic database literature as Serializable Snapshot Isolation, which + builds on Snapshot Isolation by adding checks for serialization anomalies. + Some differences in behavior and performance may be observed when compared + with other systems that use a traditional locking technique. Please see + <xref linkend="ports12"/> for detailed information. + </para> + </sect2> + </sect1> + + <sect1 id="explicit-locking"> + <title>Explicit Locking</title> + + <indexterm> + <primary>lock</primary> + </indexterm> + + <para> + <productname>PostgreSQL</productname> provides various lock modes + to control concurrent access to data in tables. These modes can + be used for application-controlled locking in situations where + <acronym>MVCC</acronym> does not give the desired behavior. Also, + most <productname>PostgreSQL</productname> commands automatically + acquire locks of appropriate modes to ensure that referenced + tables are not dropped or modified in incompatible ways while the + command executes. (For example, <command>TRUNCATE</command> cannot safely be + executed concurrently with other operations on the same table, so it + obtains an <literal>ACCESS EXCLUSIVE</literal> lock on the table to + enforce that.) + </para> + + <para> + To examine a list of the currently outstanding locks in a database + server, use the + <link linkend="view-pg-locks"><structname>pg_locks</structname></link> + system view. For more information on monitoring the status of the lock + manager subsystem, refer to <xref linkend="monitoring"/>. + </para> + + <sect2 id="locking-tables"> + <title>Table-Level Locks</title> + + <indexterm zone="locking-tables"> + <primary>LOCK</primary> + </indexterm> + + <para> + The list below shows the available lock modes and the contexts in + which they are used automatically by + <productname>PostgreSQL</productname>. You can also acquire any + of these locks explicitly with the command <xref + linkend="sql-lock"/>. + Remember that all of these lock modes are table-level locks, + even if the name contains the word + <quote>row</quote>; the names of the lock modes are historical. + To some extent the names reflect the typical usage of each lock + mode — but the semantics are all the same. The only real difference + between one lock mode and another is the set of lock modes with + which each conflicts (see <xref linkend="table-lock-compatibility"/>). + Two transactions cannot hold locks of conflicting + modes on the same table at the same time. (However, a transaction + never conflicts with itself. For example, it might acquire + <literal>ACCESS EXCLUSIVE</literal> lock and later acquire + <literal>ACCESS SHARE</literal> lock on the same table.) Non-conflicting + lock modes can be held concurrently by many transactions. Notice in + particular that some lock modes are self-conflicting (for example, + an <literal>ACCESS EXCLUSIVE</literal> lock cannot be held by more than one + transaction at a time) while others are not self-conflicting (for example, + an <literal>ACCESS SHARE</literal> lock can be held by multiple transactions). + </para> + + <variablelist> + <title>Table-Level Lock Modes</title> + <varlistentry> + <term> + <literal>ACCESS SHARE</literal> (<literal>AccessShareLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>ACCESS EXCLUSIVE</literal> lock + mode only. + </para> + + <para> + The <command>SELECT</command> command acquires a lock of this mode on + referenced tables. In general, any query that only <emphasis>reads</emphasis> a table + and does not modify it will acquire this lock mode. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>ROW SHARE</literal> (<literal>RowShareLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>EXCLUSIVE</literal> and + <literal>ACCESS EXCLUSIVE</literal> lock modes. + </para> + + <para> + The <command>SELECT</command> command acquires a lock of this mode + on all tables on which one of the <option>FOR UPDATE</option>, + <option>FOR NO KEY UPDATE</option>, + <option>FOR SHARE</option>, or + <option>FOR KEY SHARE</option> options is specified + (in addition to <literal>ACCESS SHARE</literal> locks on any other + tables that are referenced without any explicit + <option>FOR ...</option> locking option). + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>ROW EXCLUSIVE</literal> (<literal>RowExclusiveLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>SHARE</literal>, <literal>SHARE ROW + EXCLUSIVE</literal>, <literal>EXCLUSIVE</literal>, and + <literal>ACCESS EXCLUSIVE</literal> lock modes. + </para> + + <para> + The commands <command>UPDATE</command>, + <command>DELETE</command>, <command>INSERT</command>, and + <command>MERGE</command> + acquire this lock mode on the target table (in addition to + <literal>ACCESS SHARE</literal> locks on any other referenced + tables). In general, this lock mode will be acquired by any + command that <emphasis>modifies data</emphasis> in a table. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>SHARE UPDATE EXCLUSIVE</literal> (<literal>ShareUpdateExclusiveLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>SHARE UPDATE EXCLUSIVE</literal>, + <literal>SHARE</literal>, <literal>SHARE ROW + EXCLUSIVE</literal>, <literal>EXCLUSIVE</literal>, and + <literal>ACCESS EXCLUSIVE</literal> lock modes. + This mode protects a table against + concurrent schema changes and <command>VACUUM</command> runs. + </para> + + <para> + Acquired by <command>VACUUM</command> (without <option>FULL</option>), + <command>ANALYZE</command>, <command>CREATE INDEX CONCURRENTLY</command>, + <command>CREATE STATISTICS</command>, <command>COMMENT ON</command>, + <command>REINDEX CONCURRENTLY</command>, + and certain <link linkend="sql-alterindex"><command>ALTER INDEX</command></link> + and <link linkend="sql-altertable"><command>ALTER TABLE</command></link> variants + (for full details see the documentation of these commands). + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>SHARE</literal> (<literal>ShareLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>ROW EXCLUSIVE</literal>, + <literal>SHARE UPDATE EXCLUSIVE</literal>, <literal>SHARE ROW + EXCLUSIVE</literal>, <literal>EXCLUSIVE</literal>, and + <literal>ACCESS EXCLUSIVE</literal> lock modes. + This mode protects a table against concurrent data changes. + </para> + + <para> + Acquired by <command>CREATE INDEX</command> + (without <option>CONCURRENTLY</option>). + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>SHARE ROW EXCLUSIVE</literal> (<literal>ShareRowExclusiveLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>ROW EXCLUSIVE</literal>, + <literal>SHARE UPDATE EXCLUSIVE</literal>, + <literal>SHARE</literal>, <literal>SHARE ROW + EXCLUSIVE</literal>, <literal>EXCLUSIVE</literal>, and + <literal>ACCESS EXCLUSIVE</literal> lock modes. + This mode protects a table against concurrent data changes, and + is self-exclusive so that only one session can hold it at a time. + </para> + + <para> + Acquired by <command>CREATE TRIGGER</command> and some forms of + <link linkend="sql-altertable"><command>ALTER TABLE</command></link>. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>EXCLUSIVE</literal> (<literal>ExclusiveLock</literal>) + </term> + <listitem> + <para> + Conflicts with the <literal>ROW SHARE</literal>, <literal>ROW + EXCLUSIVE</literal>, <literal>SHARE UPDATE + EXCLUSIVE</literal>, <literal>SHARE</literal>, <literal>SHARE + ROW EXCLUSIVE</literal>, <literal>EXCLUSIVE</literal>, and + <literal>ACCESS EXCLUSIVE</literal> lock modes. + This mode allows only concurrent <literal>ACCESS SHARE</literal> locks, + i.e., only reads from the table can proceed in parallel with a + transaction holding this lock mode. + </para> + + <para> + Acquired by <command>REFRESH MATERIALIZED VIEW CONCURRENTLY</command>. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>ACCESS EXCLUSIVE</literal> (<literal>AccessExclusiveLock</literal>) + </term> + <listitem> + <para> + Conflicts with locks of all modes (<literal>ACCESS + SHARE</literal>, <literal>ROW SHARE</literal>, <literal>ROW + EXCLUSIVE</literal>, <literal>SHARE UPDATE + EXCLUSIVE</literal>, <literal>SHARE</literal>, <literal>SHARE + ROW EXCLUSIVE</literal>, <literal>EXCLUSIVE</literal>, and + <literal>ACCESS EXCLUSIVE</literal>). + This mode guarantees that the + holder is the only transaction accessing the table in any way. + </para> + + <para> + Acquired by the <command>DROP TABLE</command>, + <command>TRUNCATE</command>, <command>REINDEX</command>, + <command>CLUSTER</command>, <command>VACUUM FULL</command>, + and <command>REFRESH MATERIALIZED VIEW</command> (without + <option>CONCURRENTLY</option>) + commands. Many forms of <command>ALTER INDEX</command> and <command>ALTER TABLE</command> also acquire + a lock at this level. This is also the default lock mode for + <command>LOCK TABLE</command> statements that do not specify + a mode explicitly. + </para> + </listitem> + </varlistentry> + </variablelist> + + <tip> + <para> + Only an <literal>ACCESS EXCLUSIVE</literal> lock blocks a + <command>SELECT</command> (without <option>FOR UPDATE/SHARE</option>) + statement. + </para> + </tip> + + <para> + Once acquired, a lock is normally held until the end of the transaction. But if a + lock is acquired after establishing a savepoint, the lock is released + immediately if the savepoint is rolled back to. This is consistent with + the principle that <command>ROLLBACK</command> cancels all effects of the + commands since the savepoint. The same holds for locks acquired within a + <application>PL/pgSQL</application> exception block: an error escape from the block + releases locks acquired within it. + </para> + + + + <table tocentry="1" id="table-lock-compatibility"> + <title>Conflicting Lock Modes</title> + <tgroup cols="9"> + <colspec colnum="1" colwidth="1.25*"/> + <colspec colnum="2" colwidth="1*" colname="lockst"/> + <colspec colnum="3" colwidth="1*"/> + <colspec colnum="4" colwidth="1*"/> + <colspec colnum="5" colwidth="1*"/> + <colspec colnum="6" colwidth="1*"/> + <colspec colnum="7" colwidth="1*"/> + <colspec colnum="8" colwidth="1*"/> + <colspec colnum="9" colwidth="1*" colname="lockend"/> + <spanspec spanname="lockreq" namest="lockst" nameend="lockend" align="center"/> + <thead> + <row> + <entry morerows="1">Requested Lock Mode</entry> + <entry spanname="lockreq">Existing Lock Mode</entry> + </row> + <row> + <entry><literal>ACCESS SHARE</literal></entry> + <entry><literal>ROW SHARE</literal></entry> + <entry><literal>ROW EXCL.</literal></entry> + <entry><literal>SHARE UPDATE EXCL.</literal></entry> + <entry><literal>SHARE</literal></entry> + <entry><literal>SHARE ROW EXCL.</literal></entry> + <entry><literal>EXCL.</literal></entry> + <entry><literal>ACCESS EXCL.</literal></entry> + </row> + </thead> + <tbody> + <row> + <entry><literal>ACCESS SHARE</literal></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>ROW SHARE</literal></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>ROW EXCL.</literal></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>SHARE UPDATE EXCL.</literal></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>SHARE</literal></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>SHARE ROW EXCL.</literal></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>EXCL.</literal></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry><literal>ACCESS EXCL.</literal></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + </tbody> + </tgroup> + </table> + </sect2> + + <sect2 id="locking-rows"> + <title>Row-Level Locks</title> + + <para> + In addition to table-level locks, there are row-level locks, which + are listed as below with the contexts in which they are used + automatically by <productname>PostgreSQL</productname>. See + <xref linkend="row-lock-compatibility"/> for a complete table of + row-level lock conflicts. Note that a transaction can hold + conflicting locks on the same row, even in different subtransactions; + but other than that, two transactions can never hold conflicting locks + on the same row. Row-level locks do not affect data querying; they + block only <emphasis>writers and lockers</emphasis> to the same + row. Row-level locks are released at transaction end or during + savepoint rollback, just like table-level locks. + + </para> + + <variablelist> + <title>Row-Level Lock Modes</title> + <varlistentry> + <term> + <literal>FOR UPDATE</literal> + </term> + <listitem> + <para> + <literal>FOR UPDATE</literal> causes the rows retrieved by the + <command>SELECT</command> statement to be locked as though for + update. This prevents them from being locked, modified or deleted by + other transactions until the current transaction ends. That is, + other transactions that attempt <command>UPDATE</command>, + <command>DELETE</command>, + <command>SELECT FOR UPDATE</command>, + <command>SELECT FOR NO KEY UPDATE</command>, + <command>SELECT FOR SHARE</command> or + <command>SELECT FOR KEY SHARE</command> + of these rows will be blocked until the current transaction ends; + conversely, <command>SELECT FOR UPDATE</command> will wait for a + concurrent transaction that has run any of those commands on the + same row, + and will then lock and return the updated row (or no row, if the + row was deleted). Within a <literal>REPEATABLE READ</literal> or + <literal>SERIALIZABLE</literal> transaction, + however, an error will be thrown if a row to be locked has changed + since the transaction started. For further discussion see + <xref linkend="applevel-consistency"/>. + </para> + <para> + The <literal>FOR UPDATE</literal> lock mode + is also acquired by any <command>DELETE</command> on a row, and also by an + <command>UPDATE</command> that modifies the values of certain columns. Currently, + the set of columns considered for the <command>UPDATE</command> case are those that + have a unique index on them that can be used in a foreign key (so partial + indexes and expressional indexes are not considered), but this may change + in the future. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>FOR NO KEY UPDATE</literal> + </term> + <listitem> + <para> + Behaves similarly to <literal>FOR UPDATE</literal>, except that the lock + acquired is weaker: this lock will not block + <literal>SELECT FOR KEY SHARE</literal> commands that attempt to acquire + a lock on the same rows. This lock mode is also acquired by any + <command>UPDATE</command> that does not acquire a <literal>FOR UPDATE</literal> lock. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>FOR SHARE</literal> + </term> + <listitem> + <para> + Behaves similarly to <literal>FOR NO KEY UPDATE</literal>, except that it + acquires a shared lock rather than exclusive lock on each retrieved + row. A shared lock blocks other transactions from performing + <command>UPDATE</command>, <command>DELETE</command>, + <command>SELECT FOR UPDATE</command> or + <command>SELECT FOR NO KEY UPDATE</command> on these rows, but it does not + prevent them from performing <command>SELECT FOR SHARE</command> or + <command>SELECT FOR KEY SHARE</command>. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <literal>FOR KEY SHARE</literal> + </term> + <listitem> + <para> + Behaves similarly to <literal>FOR SHARE</literal>, except that the + lock is weaker: <literal>SELECT FOR UPDATE</literal> is blocked, but not + <literal>SELECT FOR NO KEY UPDATE</literal>. A key-shared lock blocks + other transactions from performing <command>DELETE</command> or + any <command>UPDATE</command> that changes the key values, but not + other <command>UPDATE</command>, and neither does it prevent + <command>SELECT FOR NO KEY UPDATE</command>, <command>SELECT FOR SHARE</command>, + or <command>SELECT FOR KEY SHARE</command>. + </para> + </listitem> + </varlistentry> + </variablelist> + + <para> + <productname>PostgreSQL</productname> doesn't remember any + information about modified rows in memory, so there is no limit on + the number of rows locked at one time. However, locking a row + might cause a disk write, e.g., <command>SELECT FOR + UPDATE</command> modifies selected rows to mark them locked, and so + will result in disk writes. + </para> + + <table tocentry="1" id="row-lock-compatibility"> + <title>Conflicting Row-Level Locks</title> + <tgroup cols="5"> + <colspec colname="col1" colwidth="1.5*"/> + <colspec colname="lockst" colwidth="1*"/> + <colspec colname="col3" colwidth="1*"/> + <colspec colname="col4" colwidth="1*"/> + <colspec colname="lockend" colwidth="1*"/> + <spanspec namest="lockst" nameend="lockend" spanname="lockreq"/> + <thead> + <row> + <entry morerows="1">Requested Lock Mode</entry> + <entry spanname="lockreq">Current Lock Mode</entry> + </row> + <row> + <entry>FOR KEY SHARE</entry> + <entry>FOR SHARE</entry> + <entry>FOR NO KEY UPDATE</entry> + <entry>FOR UPDATE</entry> + </row> + </thead> + <tbody> + <row> + <entry>FOR KEY SHARE</entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + </row> + <row> + <entry>FOR SHARE</entry> + <entry align="center"></entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry>FOR NO KEY UPDATE</entry> + <entry align="center"></entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + <row> + <entry>FOR UPDATE</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + <entry align="center">X</entry> + </row> + </tbody> + </tgroup> + </table> + </sect2> + + <sect2 id="locking-pages"> + <title>Page-Level Locks</title> + + <para> + In addition to table and row locks, page-level share/exclusive locks are + used to control read/write access to table pages in the shared buffer + pool. These locks are released immediately after a row is fetched or + updated. Application developers normally need not be concerned with + page-level locks, but they are mentioned here for completeness. + </para> + + </sect2> + + <sect2 id="locking-deadlocks"> + <title>Deadlocks</title> + + <indexterm zone="locking-deadlocks"> + <primary>deadlock</primary> + </indexterm> + + <para> + The use of explicit locking can increase the likelihood of + <firstterm>deadlocks</firstterm>, wherein two (or more) transactions each + hold locks that the other wants. For example, if transaction 1 + acquires an exclusive lock on table A and then tries to acquire + an exclusive lock on table B, while transaction 2 has already + exclusive-locked table B and now wants an exclusive lock on table + A, then neither one can proceed. + <productname>PostgreSQL</productname> automatically detects + deadlock situations and resolves them by aborting one of the + transactions involved, allowing the other(s) to complete. + (Exactly which transaction will be aborted is difficult to + predict and should not be relied upon.) + </para> + + <para> + Note that deadlocks can also occur as the result of row-level + locks (and thus, they can occur even if explicit locking is not + used). Consider the case in which two concurrent + transactions modify a table. The first transaction executes: + +<screen> +UPDATE accounts SET balance = balance + 100.00 WHERE acctnum = 11111; +</screen> + + This acquires a row-level lock on the row with the specified + account number. Then, the second transaction executes: + +<screen> +UPDATE accounts SET balance = balance + 100.00 WHERE acctnum = 22222; +UPDATE accounts SET balance = balance - 100.00 WHERE acctnum = 11111; +</screen> + + The first <command>UPDATE</command> statement successfully + acquires a row-level lock on the specified row, so it succeeds in + updating that row. However, the second <command>UPDATE</command> + statement finds that the row it is attempting to update has + already been locked, so it waits for the transaction that + acquired the lock to complete. Transaction two is now waiting on + transaction one to complete before it continues execution. Now, + transaction one executes: + +<screen> +UPDATE accounts SET balance = balance - 100.00 WHERE acctnum = 22222; +</screen> + + Transaction one attempts to acquire a row-level lock on the + specified row, but it cannot: transaction two already holds such + a lock. So it waits for transaction two to complete. Thus, + transaction one is blocked on transaction two, and transaction + two is blocked on transaction one: a deadlock + condition. <productname>PostgreSQL</productname> will detect this + situation and abort one of the transactions. + </para> + + <para> + The best defense against deadlocks is generally to avoid them by + being certain that all applications using a database acquire + locks on multiple objects in a consistent order. In the example + above, if both transactions + had updated the rows in the same order, no deadlock would have + occurred. One should also ensure that the first lock acquired on + an object in a transaction is the most restrictive mode that will be + needed for that object. If it is not feasible to verify this in + advance, then deadlocks can be handled on-the-fly by retrying + transactions that abort due to deadlocks. + </para> + + <para> + So long as no deadlock situation is detected, a transaction seeking + either a table-level or row-level lock will wait indefinitely for + conflicting locks to be released. This means it is a bad idea for + applications to hold transactions open for long periods of time + (e.g., while waiting for user input). + </para> + </sect2> + + <sect2 id="advisory-locks"> + <title>Advisory Locks</title> + + <indexterm zone="advisory-locks"> + <primary>advisory lock</primary> + </indexterm> + + <indexterm zone="advisory-locks"> + <primary>lock</primary> + <secondary>advisory</secondary> + </indexterm> + + <para> + <productname>PostgreSQL</productname> provides a means for + creating locks that have application-defined meanings. These are + called <firstterm>advisory locks</firstterm>, because the system does not + enforce their use — it is up to the application to use them + correctly. Advisory locks can be useful for locking strategies + that are an awkward fit for the MVCC model. + For example, a common use of advisory locks is to emulate pessimistic + locking strategies typical of so-called <quote>flat file</quote> data + management systems. + While a flag stored in a table could be used for the same purpose, + advisory locks are faster, avoid table bloat, and are automatically + cleaned up by the server at the end of the session. + </para> + + <para> + There are two ways to acquire an advisory lock in + <productname>PostgreSQL</productname>: at session level or at + transaction level. + Once acquired at session level, an advisory lock is held until + explicitly released or the session ends. Unlike standard lock requests, + session-level advisory lock requests do not honor transaction semantics: + a lock acquired during a transaction that is later rolled back will still + be held following the rollback, and likewise an unlock is effective even + if the calling transaction fails later. A lock can be acquired multiple + times by its owning process; for each completed lock request there must + be a corresponding unlock request before the lock is actually released. + Transaction-level lock requests, on the other hand, behave more like + regular lock requests: they are automatically released at the end of the + transaction, and there is no explicit unlock operation. This behavior + is often more convenient than the session-level behavior for short-term + usage of an advisory lock. + Session-level and transaction-level lock requests for the same advisory + lock identifier will block each other in the expected way. + If a session already holds a given advisory lock, additional requests by + it will always succeed, even if other sessions are awaiting the lock; this + statement is true regardless of whether the existing lock hold and new + request are at session level or transaction level. + </para> + + <para> + Like all locks in + <productname>PostgreSQL</productname>, a complete list of advisory locks + currently held by any session can be found in the <link + linkend="view-pg-locks"><structname>pg_locks</structname></link> system + view. + </para> + + <para> + Both advisory locks and regular locks are stored in a shared memory + pool whose size is defined by the configuration variables + <xref linkend="guc-max-locks-per-transaction"/> and + <xref linkend="guc-max-connections"/>. + Care must be taken not to exhaust this + memory or the server will be unable to grant any locks at all. + This imposes an upper limit on the number of advisory locks + grantable by the server, typically in the tens to hundreds of thousands + depending on how the server is configured. + </para> + + <para> + In certain cases using advisory locking methods, especially in queries + involving explicit ordering and <literal>LIMIT</literal> clauses, care must be + taken to control the locks acquired because of the order in which SQL + expressions are evaluated. For example: +<screen> +SELECT pg_advisory_lock(id) FROM foo WHERE id = 12345; -- ok +SELECT pg_advisory_lock(id) FROM foo WHERE id > 12345 LIMIT 100; -- danger! +SELECT pg_advisory_lock(q.id) FROM +( + SELECT id FROM foo WHERE id > 12345 LIMIT 100 +) q; -- ok +</screen> + In the above queries, the second form is dangerous because the + <literal>LIMIT</literal> is not guaranteed to be applied before the locking + function is executed. This might cause some locks to be acquired + that the application was not expecting, and hence would fail to release + (until it ends the session). + From the point of view of the application, such locks + would be dangling, although still viewable in + <structname>pg_locks</structname>. + </para> + + <para> + The functions provided to manipulate advisory locks are described in + <xref linkend="functions-advisory-locks"/>. + </para> + </sect2> + + </sect1> + + <sect1 id="applevel-consistency"> + <title>Data Consistency Checks at the Application Level</title> + + <para> + It is very difficult to enforce business rules regarding data integrity + using Read Committed transactions because the view of the data is + shifting with each statement, and even a single statement may not + restrict itself to the statement's snapshot if a write conflict occurs. + </para> + + <para> + While a Repeatable Read transaction has a stable view of the data + throughout its execution, there is a subtle issue with using + <acronym>MVCC</acronym> snapshots for data consistency checks, involving + something known as <firstterm>read/write conflicts</firstterm>. + If one transaction writes data and a concurrent transaction attempts + to read the same data (whether before or after the write), it cannot + see the work of the other transaction. The reader then appears to have + executed first regardless of which started first or which committed + first. If that is as far as it goes, there is no problem, but + if the reader also writes data which is read by a concurrent transaction + there is now a transaction which appears to have run before either of + the previously mentioned transactions. If the transaction which appears + to have executed last actually commits first, it is very easy for a + cycle to appear in a graph of the order of execution of the transactions. + When such a cycle appears, integrity checks will not work correctly + without some help. + </para> + + <para> + As mentioned in <xref linkend="xact-serializable"/>, Serializable + transactions are just Repeatable Read transactions which add + nonblocking monitoring for dangerous patterns of read/write conflicts. + When a pattern is detected which could cause a cycle in the apparent + order of execution, one of the transactions involved is rolled back to + break the cycle. + </para> + + <sect2 id="serializable-consistency"> + <title>Enforcing Consistency with Serializable Transactions</title> + + <para> + If the Serializable transaction isolation level is used for all writes + and for all reads which need a consistent view of the data, no other + effort is required to ensure consistency. Software from other + environments which is written to use serializable transactions to + ensure consistency should <quote>just work</quote> in this regard in + <productname>PostgreSQL</productname>. + </para> + + <para> + When using this technique, it will avoid creating an unnecessary burden + for application programmers if the application software goes through a + framework which automatically retries transactions which are rolled + back with a serialization failure. It may be a good idea to set + <literal>default_transaction_isolation</literal> to <literal>serializable</literal>. + It would also be wise to take some action to ensure that no other + transaction isolation level is used, either inadvertently or to + subvert integrity checks, through checks of the transaction isolation + level in triggers. + </para> + + <para> + See <xref linkend="xact-serializable"/> for performance suggestions. + </para> + + <warning> + <title>Warning: Serializable Transactions and Data Replication</title> + <para> + This level of integrity protection using Serializable transactions + does not yet extend to hot standby mode (<xref linkend="hot-standby"/>) + or logical replicas. + Because of that, those using hot standby or logical replication + may want to use Repeatable Read and explicit locking on the primary. + </para> + </warning> + </sect2> + + <sect2 id="non-serializable-consistency"> + <title>Enforcing Consistency with Explicit Blocking Locks</title> + + <para> + When non-serializable writes are possible, + to ensure the current validity of a row and protect it against + concurrent updates one must use <command>SELECT FOR UPDATE</command>, + <command>SELECT FOR SHARE</command>, or an appropriate <command>LOCK + TABLE</command> statement. (<command>SELECT FOR UPDATE</command> + and <command>SELECT FOR SHARE</command> lock just the + returned rows against concurrent updates, while <command>LOCK + TABLE</command> locks the whole table.) This should be taken into + account when porting applications to + <productname>PostgreSQL</productname> from other environments. + </para> + + <para> + Also of note to those converting from other environments is the fact + that <command>SELECT FOR UPDATE</command> does not ensure that a + concurrent transaction will not update or delete a selected row. + To do that in <productname>PostgreSQL</productname> you must actually + update the row, even if no values need to be changed. + <command>SELECT FOR UPDATE</command> <emphasis>temporarily blocks</emphasis> + other transactions from acquiring the same lock or executing an + <command>UPDATE</command> or <command>DELETE</command> which would + affect the locked row, but once the transaction holding this lock + commits or rolls back, a blocked transaction will proceed with the + conflicting operation unless an actual <command>UPDATE</command> of + the row was performed while the lock was held. + </para> + + <para> + Global validity checks require extra thought under + non-serializable <acronym>MVCC</acronym>. + For example, a banking application might wish to check that the sum of + all credits in one table equals the sum of debits in another table, + when both tables are being actively updated. Comparing the results of two + successive <literal>SELECT sum(...)</literal> commands will not work reliably in + Read Committed mode, since the second query will likely include the results + of transactions not counted by the first. Doing the two sums in a + single repeatable read transaction will give an accurate picture of only the + effects of transactions that committed before the repeatable read transaction + started — but one might legitimately wonder whether the answer is still + relevant by the time it is delivered. If the repeatable read transaction + itself applied some changes before trying to make the consistency check, + the usefulness of the check becomes even more debatable, since now it + includes some but not all post-transaction-start changes. In such cases + a careful person might wish to lock all tables needed for the check, + in order to get an indisputable picture of current reality. A + <literal>SHARE</literal> mode (or higher) lock guarantees that there are no + uncommitted changes in the locked table, other than those of the current + transaction. + </para> + + <para> + Note also that if one is relying on explicit locking to prevent concurrent + changes, one should either use Read Committed mode, or in Repeatable Read + mode be careful to obtain + locks before performing queries. A lock obtained by a + repeatable read transaction guarantees that no other transactions modifying + the table are still running, but if the snapshot seen by the + transaction predates obtaining the lock, it might predate some now-committed + changes in the table. A repeatable read transaction's snapshot is actually + frozen at the start of its first query or data-modification command + (<literal>SELECT</literal>, <literal>INSERT</literal>, + <literal>UPDATE</literal>, <literal>DELETE</literal>, or + <literal>MERGE</literal>), so it is possible to obtain locks explicitly + before the snapshot is frozen. + </para> + </sect2> + </sect1> + + <sect1 id="mvcc-serialization-failure-handling"> + <title>Serialization Failure Handling</title> + + <indexterm> + <primary>serialization failure</primary> + </indexterm> + <indexterm> + <primary>retryable error</primary> + </indexterm> + + <para> + Both Repeatable Read and Serializable isolation levels can produce + errors that are designed to prevent serialization anomalies. As + previously stated, applications using these levels must be prepared to + retry transactions that fail due to serialization errors. Such an + error's message text will vary according to the precise circumstances, + but it will always have the SQLSTATE code <literal>40001</literal> + (<literal>serialization_failure</literal>). + </para> + + <para> + It may also be advisable to retry deadlock failures. + These have the SQLSTATE code <literal>40P01</literal> + (<literal>deadlock_detected</literal>). + </para> + + <para> + In some cases it is also appropriate to retry unique-key failures, + which have SQLSTATE code <literal>23505</literal> + (<literal>unique_violation</literal>), and exclusion constraint + failures, which have SQLSTATE code <literal>23P01</literal> + (<literal>exclusion_violation</literal>). For example, if the + application selects a new value for a primary key column after + inspecting the currently stored keys, it could get a unique-key + failure because another application instance selected the same new key + concurrently. This is effectively a serialization failure, but the + server will not detect it as such because it cannot <quote>see</quote> + the connection between the inserted value and the previous reads. + There are also some corner cases in which the server will issue a + unique-key or exclusion constraint error even though in principle it + has enough information to determine that a serialization problem + is the underlying cause. While it's recommendable to just + retry <literal>serialization_failure</literal> errors unconditionally, + more care is needed when retrying these other error codes, since they + might represent persistent error conditions rather than transient + failures. + </para> + + <para> + It is important to retry the complete transaction, including all logic + that decides which SQL to issue and/or which values to use. + Therefore, <productname>PostgreSQL</productname> does not offer an + automatic retry facility, since it cannot do so with any guarantee of + correctness. + </para> + + <para> + Transaction retry does not guarantee that the retried transaction will + complete; multiple retries may be needed. In cases with very high + contention, it is possible that completion of a transaction may take + many attempts. In cases involving a conflicting prepared transaction, + it may not be possible to make progress until the prepared transaction + commits or rolls back. + </para> + </sect1> + + <sect1 id="mvcc-caveats"> + <title>Caveats</title> + + <para> + Some DDL commands, currently only <link linkend="sql-truncate"><command>TRUNCATE</command></link> and the + table-rewriting forms of <link linkend="sql-altertable"><command>ALTER TABLE</command></link>, are not + MVCC-safe. This means that after the truncation or rewrite commits, the + table will appear empty to concurrent transactions, if they are using a + snapshot taken before the DDL command committed. This will only be an + issue for a transaction that did not access the table in question + before the DDL command started — any transaction that has done so + would hold at least an <literal>ACCESS SHARE</literal> table lock, + which would block the DDL command until that transaction completes. + So these commands will not cause any apparent inconsistency in the + table contents for successive queries on the target table, but they + could cause visible inconsistency between the contents of the target + table and other tables in the database. + </para> + + <para> + Support for the Serializable transaction isolation level has not yet + been added to hot standby replication targets (described in + <xref linkend="hot-standby"/>). The strictest isolation level currently + supported in hot standby mode is Repeatable Read. While performing all + permanent database writes within Serializable transactions on the + primary will ensure that all standbys will eventually reach a consistent + state, a Repeatable Read transaction run on the standby can sometimes + see a transient state that is inconsistent with any serial execution + of the transactions on the primary. + </para> + + <para> + Internal access to the system catalogs is not done using the isolation + level of the current transaction. This means that newly created database + objects such as tables are visible to concurrent Repeatable Read and + Serializable transactions, even though the rows they contain are not. In + contrast, queries that explicitly examine the system catalogs don't see + rows representing concurrently created database objects, in the higher + isolation levels. + </para> + </sect1> + + <sect1 id="locking-indexes"> + <title>Locking and Indexes</title> + + <indexterm zone="locking-indexes"> + <primary>index</primary> + <secondary>locks</secondary> + </indexterm> + + <para> + Though <productname>PostgreSQL</productname> + provides nonblocking read/write access to table + data, nonblocking read/write access is not currently offered for every + index access method implemented + in <productname>PostgreSQL</productname>. + The various index types are handled as follows: + + <variablelist> + <varlistentry> + <term> + B-tree, <acronym>GiST</acronym> and <acronym>SP-GiST</acronym> indexes + </term> + <listitem> + <para> + Short-term share/exclusive page-level locks are used for + read/write access. Locks are released immediately after each + index row is fetched or inserted. These index types provide + the highest concurrency without deadlock conditions. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + Hash indexes + </term> + <listitem> + <para> + Share/exclusive hash-bucket-level locks are used for read/write + access. Locks are released after the whole bucket is processed. + Bucket-level locks provide better concurrency than index-level + ones, but deadlock is possible since the locks are held longer + than one index operation. + </para> + </listitem> + </varlistentry> + + <varlistentry> + <term> + <acronym>GIN</acronym> indexes + </term> + <listitem> + <para> + Short-term share/exclusive page-level locks are used for + read/write access. Locks are released immediately after each + index row is fetched or inserted. But note that insertion of a + GIN-indexed value usually produces several index key insertions + per row, so GIN might do substantial work for a single value's + insertion. + </para> + </listitem> + </varlistentry> + </variablelist> + </para> + + <para> + Currently, B-tree indexes offer the best performance for concurrent + applications; since they also have more features than hash + indexes, they are the recommended index type for concurrent + applications that need to index scalar data. When dealing with + non-scalar data, B-trees are not useful, and GiST, SP-GiST or GIN + indexes should be used instead. + </para> + </sect1> + </chapter> |