initdb — create a new PostgreSQL database cluster
initdb [option...] [ --pgdata | -D ] directory
initdb creates a new
PostgreSQL database cluster.
Creating a database cluster consists of creating the
directories in
which the cluster data will live, generating the shared catalog
tables (tables that belong to the whole cluster rather than to any
particular database), and creating the postgres,
template1, and template0 databases.
The postgres database is a default database meant
for use by users, utilities and third party applications.
template1 and template0 are
meant as source databases to be copied by later CREATE
DATABASE commands. template0 should never
be modified, but you can add objects to template1,
which by default will be copied into databases created later. See
Section 23.3 for more details.
Although initdb will attempt to create the
specified data directory, it might not have permission if the parent
directory of the desired data directory is root-owned. To initialize
in such a setup, create an empty data directory as root, then use
chown to assign ownership of that directory to the
database user account, then su to become the
database user to run initdb.
initdb must be run as the user that will own the
server process, because the server needs to have access to the
files and directories that initdb creates.
Since the server cannot be run as root, you must not run
initdb as root either. (It will in fact refuse
to do so.)
For security reasons the new cluster created by initdb
will only be accessible by the cluster owner by default. The
--allow-group-access option allows any user in the same
group as the cluster owner to read files in the cluster. This is useful
for performing backups as a non-privileged user.
initdb initializes the database cluster's default locale
and character set encoding. These can also be set separately for each
database when it is created. initdb determines those
settings for the template databases, which will serve as the default for
all other databases.
By default, initdb uses the locale provider
libc (see Section 24.1.4). The
libc locale provider takes the locale settings from the
environment, and determines the encoding from the locale settings.
To choose a different locale for the cluster, use the option
--locale. There are also individual options
--lc-* and --icu-locale (see below) to
set values for the individual locale categories. Note that inconsistent
settings for different locale categories can give nonsensical results, so
this should be used with care.
Alternatively, initdb can use the ICU library to provide
locale services by specifying --locale-provider=icu. The
server must be built with ICU support. To choose the specific ICU locale ID
to apply, use the option --icu-locale. Note that for
implementation reasons and to support legacy code,
initdb will still select and initialize libc locale
settings when the ICU locale provider is used.
When initdb runs, it will print out the locale settings
it has chosen. If you have complex requirements or specified multiple
options, it is advisable to check that the result matches what was
intended.
More details about locale settings can be found in Section 24.1.
To alter the default encoding, use the --encoding.
More details can be found in Section 24.3.
-A authmethod--auth=authmethod #
This option specifies the default authentication method for local
users used in pg_hba.conf (host
and local lines). See Section 21.1
for an overview of valid values.
initdb will
prepopulate pg_hba.conf entries using the
specified authentication method for non-replication as well as
replication connections.
Do not use trust unless you trust all local users on your
system. trust is the default for ease of installation.
--auth-host=authmethod #
This option specifies the authentication method for local users via
TCP/IP connections used in pg_hba.conf
(host lines).
--auth-local=authmethod #
This option specifies the authentication method for local users via
Unix-domain socket connections used in pg_hba.conf
(local lines).
-D directory--pgdata=directory #
This option specifies the directory where the database cluster
should be stored. This is the only information required by
initdb, but you can avoid writing it by
setting the PGDATA environment variable, which
can be convenient since the database server
(postgres) can find the data
directory later by the same variable.
-E encoding--encoding=encoding #Selects the encoding of the template databases. This will also be the default encoding of any database you create later, unless you override it then. The character sets supported by the PostgreSQL server are described in Section 24.3.1.
By default, the template database encoding is derived from the
locale. If --no-locale is specified
(or equivalently, if the locale is C or
POSIX), then the default is UTF8
for the ICU provider and SQL_ASCII for the
libc provider.
-g--allow-group-access #
Allows users in the same group as the cluster owner to read all cluster
files created by initdb. This option is ignored
on Windows as it does not support
POSIX-style group permissions.
--icu-locale=locale #Specifies the ICU locale when the ICU provider is used. Locale support is described in Section 24.1.
--icu-rules=rules #Specifies additional collation rules to customize the behavior of the default collation. This is supported for ICU only.
-k--data-checksums #
Use checksums on data pages to help detect corruption by the
I/O system that would otherwise be silent. Enabling checksums
may incur a noticeable performance penalty. If set, checksums
are calculated for all objects, in all databases. All checksum
failures will be reported in the
pg_stat_database view.
See Section 30.2 for details.
--locale=locale #
Sets the default locale for the database cluster. If this
option is not specified, the locale is inherited from the
environment that initdb runs in. Locale
support is described in Section 24.1.
--lc-collate=locale--lc-ctype=locale--lc-messages=locale--lc-monetary=locale--lc-numeric=locale--lc-time=locale #
Like --locale, but only sets the locale in
the specified category.
--no-locale #
Equivalent to --locale=C.
--locale-provider={libc|icu} #
This option sets the locale provider for databases created in the new
cluster. It can be overridden in the CREATE
DATABASE command when new databases are subsequently
created. The default is libc (see Section 24.1.4).
-N--no-sync #
By default, initdb will wait for all files to be
written safely to disk. This option causes initdb
to return without waiting, which is faster, but means that a
subsequent operating system crash can leave the data directory
corrupt. Generally, this option is useful for testing, but should not
be used when creating a production installation.
--no-instructions #
By default, initdb will write instructions for how
to start the cluster at the end of its output. This option causes
those instructions to be left out. This is primarily intended for use
by tools that wrap initdb in platform-specific
behavior, where those instructions are likely to be incorrect.
--pwfile=filename #
Makes initdb read the bootstrap superuser's password
from a file. The first line of the file is taken as the password.
-S--sync-only #
Safely write all database files to disk and exit. This does not
perform any of the normal initdb operations.
Generally, this option is useful for ensuring reliable recovery after
changing fsync from off to
on.
-T config--text-search-config=config #Sets the default text search configuration. See default_text_search_config for further information.
-U username--username=username #
Sets the user name of the
bootstrap superuser.
This defaults to the name of the operating-system user running
initdb.
-W--pwprompt #
Makes initdb prompt for a password
to give the bootstrap superuser. If you don't plan on using password
authentication, this is not important. Otherwise you won't be
able to use password authentication until you have a password
set up.
-X directory--waldir=directory #This option specifies the directory where the write-ahead log should be stored.
--wal-segsize=size #Set the WAL segment size, in megabytes. This is the size of each individual file in the WAL log. The default size is 16 megabytes. The value must be a power of 2 between 1 and 1024 (megabytes). This option can only be set during initialization, and cannot be changed later.
It may be useful to adjust this size to control the granularity of WAL log shipping or archiving. Also, in databases with a high volume of WAL, the sheer number of WAL files per directory can become a performance and management problem. Increasing the WAL file size will reduce the number of WAL files.
Other, less commonly used, options are also available:
-c name=value--set name=value #
Forcibly set the server parameter name
to value during initdb,
and also install that setting in the
generated postgresql.conf file,
so that it will apply during future server runs.
This option can be given more than once to set several parameters.
It is primarily useful when the environment is such that the server
will not start at all using the default parameters.
-d--debug #
Print debugging output from the bootstrap backend and a few other
messages of lesser interest for the general public.
The bootstrap backend is the program initdb
uses to create the catalog tables. This option generates a tremendous
amount of extremely boring output.
--discard-caches #
Run the bootstrap backend with the
debug_discard_caches=1 option.
This takes a very long time and is only of use for deep debugging.
-L directory #
Specifies where initdb should find
its input files to initialize the database cluster. This is
normally not necessary. You will be told if you need to
specify their location explicitly.
-n--no-clean #
By default, when initdb
determines that an error prevented it from completely creating the database
cluster, it removes any files it might have created before discovering
that it cannot finish the job. This option inhibits tidying-up and is
thus useful for debugging.
Other options:
PGDATA #
Specifies the directory where the database cluster is to be
stored; can be overridden using the -D option.
PG_COLOR #
Specifies whether to use color in diagnostic messages. Possible values
are always, auto and
never.
TZ #Specifies the default time zone of the created database cluster. The value should be a full time zone name (see Section 8.5.3).
This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see Section 34.15).
initdb can also be invoked via
pg_ctl initdb.