initdb initdb 1 Application initdb create a new PostgreSQL database cluster initdb option --pgdata -D directory initdb creates a new PostgreSQL database cluster. Creating a database cluster consists of creating the directories in which the cluster data will live, generating the shared catalog tables (tables that belong to the whole cluster rather than to any particular database), and creating the postgres, template1, and template0 databases. The postgres database is a default database meant for use by users, utilities and third party applications. template1 and template0 are meant as source databases to be copied by later CREATE DATABASE commands. template0 should never be modified, but you can add objects to template1, which by default will be copied into databases created later. See for more details. Although initdb will attempt to create the specified data directory, it might not have permission if the parent directory of the desired data directory is root-owned. To initialize in such a setup, create an empty data directory as root, then use chown to assign ownership of that directory to the database user account, then su to become the database user to run initdb. initdb must be run as the user that will own the server process, because the server needs to have access to the files and directories that initdb creates. Since the server cannot be run as root, you must not run initdb as root either. (It will in fact refuse to do so.) For security reasons the new cluster created by initdb will only be accessible by the cluster owner by default. The --allow-group-access option allows any user in the same group as the cluster owner to read files in the cluster. This is useful for performing backups as a non-privileged user. initdb initializes the database cluster's default locale and character set encoding. These can also be set separately for each database when it is created. initdb determines those settings for the template databases, which will serve as the default for all other databases. By default, initdb uses the locale provider libc (see ). The libc locale provider takes the locale settings from the environment, and determines the encoding from the locale settings. To choose a different locale for the cluster, use the option --locale. There are also individual options --lc-* and --icu-locale (see below) to set values for the individual locale categories. Note that inconsistent settings for different locale categories can give nonsensical results, so this should be used with care. Alternatively, initdb can use the ICU library to provide locale services by specifying --locale-provider=icu. The server must be built with ICU support. To choose the specific ICU locale ID to apply, use the option --icu-locale. Note that for implementation reasons and to support legacy code, initdb will still select and initialize libc locale settings when the ICU locale provider is used. When initdb runs, it will print out the locale settings it has chosen. If you have complex requirements or specified multiple options, it is advisable to check that the result matches what was intended. More details about locale settings can be found in . To alter the default encoding, use the --encoding. More details can be found in . -A authmethod --auth=authmethod This option specifies the default authentication method for local users used in pg_hba.conf (host and local lines). See for an overview of valid values. initdb will prepopulate pg_hba.conf entries using the specified authentication method for non-replication as well as replication connections. Do not use trust unless you trust all local users on your system. trust is the default for ease of installation. --auth-host=authmethod This option specifies the authentication method for local users via TCP/IP connections used in pg_hba.conf (host lines). --auth-local=authmethod This option specifies the authentication method for local users via Unix-domain socket connections used in pg_hba.conf (local lines). -D directory --pgdata=directory This option specifies the directory where the database cluster should be stored. This is the only information required by initdb, but you can avoid writing it by setting the PGDATA environment variable, which can be convenient since the database server (postgres) can find the data directory later by the same variable. -E encoding --encoding=encoding Selects the encoding of the template databases. This will also be the default encoding of any database you create later, unless you override it then. The character sets supported by the PostgreSQL server are described in . By default, the template database encoding is derived from the locale. If is specified (or equivalently, if the locale is C or POSIX), then the default is UTF8 for the ICU provider and SQL_ASCII for the libc provider. -g --allow-group-access Allows users in the same group as the cluster owner to read all cluster files created by initdb. This option is ignored on Windows as it does not support POSIX-style group permissions. --icu-locale=locale Specifies the ICU locale when the ICU provider is used. Locale support is described in . --icu-rules=rules Specifies additional collation rules to customize the behavior of the default collation. This is supported for ICU only. -k --data-checksums Use checksums on data pages to help detect corruption by the I/O system that would otherwise be silent. Enabling checksums may incur a noticeable performance penalty. If set, checksums are calculated for all objects, in all databases. All checksum failures will be reported in the pg_stat_database view. See for details. --locale=locale Sets the default locale for the database cluster. If this option is not specified, the locale is inherited from the environment that initdb runs in. Locale support is described in . --lc-collate=locale --lc-ctype=locale --lc-messages=locale --lc-monetary=locale --lc-numeric=locale --lc-time=locale Like --locale, but only sets the locale in the specified category. --no-locale Equivalent to --locale=C. --locale-provider={libc|icu} This option sets the locale provider for databases created in the new cluster. It can be overridden in the CREATE DATABASE command when new databases are subsequently created. The default is libc (see ). -N --no-sync By default, initdb will wait for all files to be written safely to disk. This option causes initdb to return without waiting, which is faster, but means that a subsequent operating system crash can leave the data directory corrupt. Generally, this option is useful for testing, but should not be used when creating a production installation. --no-instructions By default, initdb will write instructions for how to start the cluster at the end of its output. This option causes those instructions to be left out. This is primarily intended for use by tools that wrap initdb in platform-specific behavior, where those instructions are likely to be incorrect. --pwfile=filename Makes initdb read the bootstrap superuser's password from a file. The first line of the file is taken as the password. -S --sync-only Safely write all database files to disk and exit. This does not perform any of the normal initdb operations. Generally, this option is useful for ensuring reliable recovery after changing from off to on. -T config --text-search-config=config Sets the default text search configuration. See for further information. -U username --username=username Sets the user name of the bootstrap superuser. This defaults to the name of the operating-system user running initdb. -W --pwprompt Makes initdb prompt for a password to give the bootstrap superuser. If you don't plan on using password authentication, this is not important. Otherwise you won't be able to use password authentication until you have a password set up. -X directory --waldir=directory This option specifies the directory where the write-ahead log should be stored. --wal-segsize=size Set the WAL segment size, in megabytes. This is the size of each individual file in the WAL log. The default size is 16 megabytes. The value must be a power of 2 between 1 and 1024 (megabytes). This option can only be set during initialization, and cannot be changed later. It may be useful to adjust this size to control the granularity of WAL log shipping or archiving. Also, in databases with a high volume of WAL, the sheer number of WAL files per directory can become a performance and management problem. Increasing the WAL file size will reduce the number of WAL files. Other, less commonly used, options are also available: -c name=value --set name=value Forcibly set the server parameter name to value during initdb, and also install that setting in the generated postgresql.conf file, so that it will apply during future server runs. This option can be given more than once to set several parameters. It is primarily useful when the environment is such that the server will not start at all using the default parameters. -d --debug Print debugging output from the bootstrap backend and a few other messages of lesser interest for the general public. The bootstrap backend is the program initdb uses to create the catalog tables. This option generates a tremendous amount of extremely boring output. --discard-caches Run the bootstrap backend with the debug_discard_caches=1 option. This takes a very long time and is only of use for deep debugging. -L directory Specifies where initdb should find its input files to initialize the database cluster. This is normally not necessary. You will be told if you need to specify their location explicitly. -n --no-clean By default, when initdb determines that an error prevented it from completely creating the database cluster, it removes any files it might have created before discovering that it cannot finish the job. This option inhibits tidying-up and is thus useful for debugging. Other options: -V --version Print the initdb version and exit. -? --help Show help about initdb command line arguments, and exit. PGDATA Specifies the directory where the database cluster is to be stored; can be overridden using the -D option. PG_COLOR Specifies whether to use color in diagnostic messages. Possible values are always, auto and never. TZ Specifies the default time zone of the created database cluster. The value should be a full time zone name (see ). This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see ). initdb can also be invoked via pg_ctl initdb.