/*------------------------------------------------------------------------- * * pqcomm.c * Communication functions between the Frontend and the Backend * * These routines handle the low-level details of communication between * frontend and backend. They just shove data across the communication * channel, and are ignorant of the semantics of the data. * * To emit an outgoing message, use the routines in pqformat.c to construct * the message in a buffer and then emit it in one call to pq_putmessage. * There are no functions to send raw bytes or partial messages; this * ensures that the channel will not be clogged by an incomplete message if * execution is aborted by ereport(ERROR) partway through the message. * * At one time, libpq was shared between frontend and backend, but now * the backend's "backend/libpq" is quite separate from "interfaces/libpq". * All that remains is similarities of names to trap the unwary... * * Portions Copyright (c) 1996-2023, PostgreSQL Global Development Group * Portions Copyright (c) 1994, Regents of the University of California * * src/backend/libpq/pqcomm.c * *------------------------------------------------------------------------- */ /*------------------------ * INTERFACE ROUTINES * * setup/teardown: * StreamServerPort - Open postmaster's server port * StreamConnection - Create new connection with client * StreamClose - Close a client/backend connection * TouchSocketFiles - Protect socket files against /tmp cleaners * pq_init - initialize libpq at backend startup * socket_comm_reset - reset libpq during error recovery * socket_close - shutdown libpq at backend exit * * low-level I/O: * pq_getbytes - get a known number of bytes from connection * pq_getmessage - get a message with length word from connection * pq_getbyte - get next byte from connection * pq_peekbyte - peek at next byte from connection * pq_flush - flush pending output * pq_flush_if_writable - flush pending output if writable without blocking * pq_getbyte_if_available - get a byte if available without blocking * * message-level I/O * pq_putmessage - send a normal message (suppressed in COPY OUT mode) * pq_putmessage_noblock - buffer a normal message (suppressed in COPY OUT) * *------------------------ */ #include "postgres.h" #ifdef HAVE_POLL_H #include #endif #include #include #include #include #include #include #include #include #include #include #include #include #ifdef WIN32 #include #endif #include "common/ip.h" #include "libpq/libpq.h" #include "miscadmin.h" #include "port/pg_bswap.h" #include "storage/ipc.h" #include "utils/guc_hooks.h" #include "utils/memutils.h" /* * Cope with the various platform-specific ways to spell TCP keepalive socket * options. This doesn't cover Windows, which as usual does its own thing. */ #if defined(TCP_KEEPIDLE) /* TCP_KEEPIDLE is the name of this option on Linux and *BSD */ #define PG_TCP_KEEPALIVE_IDLE TCP_KEEPIDLE #define PG_TCP_KEEPALIVE_IDLE_STR "TCP_KEEPIDLE" #elif defined(TCP_KEEPALIVE_THRESHOLD) /* TCP_KEEPALIVE_THRESHOLD is the name of this option on Solaris >= 11 */ #define PG_TCP_KEEPALIVE_IDLE TCP_KEEPALIVE_THRESHOLD #define PG_TCP_KEEPALIVE_IDLE_STR "TCP_KEEPALIVE_THRESHOLD" #elif defined(TCP_KEEPALIVE) && defined(__darwin__) /* TCP_KEEPALIVE is the name of this option on macOS */ /* Caution: Solaris has this symbol but it means something different */ #define PG_TCP_KEEPALIVE_IDLE TCP_KEEPALIVE #define PG_TCP_KEEPALIVE_IDLE_STR "TCP_KEEPALIVE" #endif /* * Configuration options */ int Unix_socket_permissions; char *Unix_socket_group; /* Where the Unix socket files are (list of palloc'd strings) */ static List *sock_paths = NIL; /* * Buffers for low-level I/O. * * The receive buffer is fixed size. Send buffer is usually 8k, but can be * enlarged by pq_putmessage_noblock() if the message doesn't fit otherwise. */ #define PQ_SEND_BUFFER_SIZE 8192 #define PQ_RECV_BUFFER_SIZE 8192 static char *PqSendBuffer; static int PqSendBufferSize; /* Size send buffer */ static int PqSendPointer; /* Next index to store a byte in PqSendBuffer */ static int PqSendStart; /* Next index to send a byte in PqSendBuffer */ static char PqRecvBuffer[PQ_RECV_BUFFER_SIZE]; static int PqRecvPointer; /* Next index to read a byte from PqRecvBuffer */ static int PqRecvLength; /* End of data available in PqRecvBuffer */ /* * Message status */ static bool PqCommBusy; /* busy sending data to the client */ static bool PqCommReadingMsg; /* in the middle of reading a message */ /* Internal functions */ static void socket_comm_reset(void); static void socket_close(int code, Datum arg); static void socket_set_nonblocking(bool nonblocking); static int socket_flush(void); static int socket_flush_if_writable(void); static bool socket_is_send_pending(void); static int socket_putmessage(char msgtype, const char *s, size_t len); static void socket_putmessage_noblock(char msgtype, const char *s, size_t len); static int internal_putbytes(const char *s, size_t len); static int internal_flush(void); static int Lock_AF_UNIX(const char *unixSocketDir, const char *unixSocketPath); static int Setup_AF_UNIX(const char *sock_path); static const PQcommMethods PqCommSocketMethods = { socket_comm_reset, socket_flush, socket_flush_if_writable, socket_is_send_pending, socket_putmessage, socket_putmessage_noblock }; const PQcommMethods *PqCommMethods = &PqCommSocketMethods; WaitEventSet *FeBeWaitSet; /* -------------------------------- * pq_init - initialize libpq at backend startup * -------------------------------- */ void pq_init(void) { int socket_pos PG_USED_FOR_ASSERTS_ONLY; int latch_pos PG_USED_FOR_ASSERTS_ONLY; /* initialize state variables */ PqSendBufferSize = PQ_SEND_BUFFER_SIZE; PqSendBuffer = MemoryContextAlloc(TopMemoryContext, PqSendBufferSize); PqSendPointer = PqSendStart = PqRecvPointer = PqRecvLength = 0; PqCommBusy = false; PqCommReadingMsg = false; /* set up process-exit hook to close the socket */ on_proc_exit(socket_close, 0); /* * In backends (as soon as forked) we operate the underlying socket in * nonblocking mode and use latches to implement blocking semantics if * needed. That allows us to provide safely interruptible reads and * writes. * * Use COMMERROR on failure, because ERROR would try to send the error to * the client, which might require changing the mode again, leading to * infinite recursion. */ #ifndef WIN32 if (!pg_set_noblock(MyProcPort->sock)) ereport(COMMERROR, (errmsg("could not set socket to nonblocking mode: %m"))); #endif #ifndef WIN32 /* Don't give the socket to any subprograms we execute. */ if (fcntl(MyProcPort->sock, F_SETFD, FD_CLOEXEC) < 0) elog(FATAL, "fcntl(F_SETFD) failed on socket: %m"); #endif FeBeWaitSet = CreateWaitEventSet(TopMemoryContext, FeBeWaitSetNEvents); socket_pos = AddWaitEventToSet(FeBeWaitSet, WL_SOCKET_WRITEABLE, MyProcPort->sock, NULL, NULL); latch_pos = AddWaitEventToSet(FeBeWaitSet, WL_LATCH_SET, PGINVALID_SOCKET, MyLatch, NULL); AddWaitEventToSet(FeBeWaitSet, WL_POSTMASTER_DEATH, PGINVALID_SOCKET, NULL, NULL); /* * The event positions match the order we added them, but let's sanity * check them to be sure. */ Assert(socket_pos == FeBeWaitSetSocketPos); Assert(latch_pos == FeBeWaitSetLatchPos); } /* -------------------------------- * socket_comm_reset - reset libpq during error recovery * * This is called from error recovery at the outer idle loop. It's * just to get us out of trouble if we somehow manage to elog() from * inside a pqcomm.c routine (which ideally will never happen, but...) * -------------------------------- */ static void socket_comm_reset(void) { /* Do not throw away pending data, but do reset the busy flag */ PqCommBusy = false; } /* -------------------------------- * socket_close - shutdown libpq at backend exit * * This is the one pg_on_exit_callback in place during BackendInitialize(). * That function's unusual signal handling constrains that this callback be * safe to run at any instant. * -------------------------------- */ static void socket_close(int code, Datum arg) { /* Nothing to do in a standalone backend, where MyProcPort is NULL. */ if (MyProcPort != NULL) { #ifdef ENABLE_GSS /* * Shutdown GSSAPI layer. This section does nothing when interrupting * BackendInitialize(), because pg_GSS_recvauth() makes first use of * "ctx" and "cred". * * Note that we don't bother to free MyProcPort->gss, since we're * about to exit anyway. */ if (MyProcPort->gss) { OM_uint32 min_s; if (MyProcPort->gss->ctx != GSS_C_NO_CONTEXT) gss_delete_sec_context(&min_s, &MyProcPort->gss->ctx, NULL); if (MyProcPort->gss->cred != GSS_C_NO_CREDENTIAL) gss_release_cred(&min_s, &MyProcPort->gss->cred); } #endif /* ENABLE_GSS */ /* * Cleanly shut down SSL layer. Nowhere else does a postmaster child * call this, so this is safe when interrupting BackendInitialize(). */ secure_close(MyProcPort); /* * Formerly we did an explicit close() here, but it seems better to * leave the socket open until the process dies. This allows clients * to perform a "synchronous close" if they care --- wait till the * transport layer reports connection closure, and you can be sure the * backend has exited. * * We do set sock to PGINVALID_SOCKET to prevent any further I/O, * though. */ MyProcPort->sock = PGINVALID_SOCKET; } } /* * Streams -- wrapper around Unix socket system calls * * * Stream functions are used for vanilla TCP connection protocol. */ /* * StreamServerPort -- open a "listening" port to accept connections. * * family should be AF_UNIX or AF_UNSPEC; portNumber is the port number. * For AF_UNIX ports, hostName should be NULL and unixSocketDir must be * specified. For TCP ports, hostName is either NULL for all interfaces or * the interface to listen on, and unixSocketDir is ignored (can be NULL). * * Successfully opened sockets are added to the ListenSocket[] array (of * length MaxListen), at the first position that isn't PGINVALID_SOCKET. * * RETURNS: STATUS_OK or STATUS_ERROR */ int StreamServerPort(int family, const char *hostName, unsigned short portNumber, const char *unixSocketDir, pgsocket ListenSocket[], int MaxListen) { pgsocket fd; int err; int maxconn; int ret; char portNumberStr[32]; const char *familyDesc; char familyDescBuf[64]; const char *addrDesc; char addrBuf[NI_MAXHOST]; char *service; struct addrinfo *addrs = NULL, *addr; struct addrinfo hint; int listen_index = 0; int added = 0; char unixSocketPath[MAXPGPATH]; #if !defined(WIN32) || defined(IPV6_V6ONLY) int one = 1; #endif /* Initialize hint structure */ MemSet(&hint, 0, sizeof(hint)); hint.ai_family = family; hint.ai_flags = AI_PASSIVE; hint.ai_socktype = SOCK_STREAM; if (family == AF_UNIX) { /* * Create unixSocketPath from portNumber and unixSocketDir and lock * that file path */ UNIXSOCK_PATH(unixSocketPath, portNumber, unixSocketDir); if (strlen(unixSocketPath) >= UNIXSOCK_PATH_BUFLEN) { ereport(LOG, (errmsg("Unix-domain socket path \"%s\" is too long (maximum %d bytes)", unixSocketPath, (int) (UNIXSOCK_PATH_BUFLEN - 1)))); return STATUS_ERROR; } if (Lock_AF_UNIX(unixSocketDir, unixSocketPath) != STATUS_OK) return STATUS_ERROR; service = unixSocketPath; } else { snprintf(portNumberStr, sizeof(portNumberStr), "%d", portNumber); service = portNumberStr; } ret = pg_getaddrinfo_all(hostName, service, &hint, &addrs); if (ret || !addrs) { if (hostName) ereport(LOG, (errmsg("could not translate host name \"%s\", service \"%s\" to address: %s", hostName, service, gai_strerror(ret)))); else ereport(LOG, (errmsg("could not translate service \"%s\" to address: %s", service, gai_strerror(ret)))); if (addrs) pg_freeaddrinfo_all(hint.ai_family, addrs); return STATUS_ERROR; } for (addr = addrs; addr; addr = addr->ai_next) { if (family != AF_UNIX && addr->ai_family == AF_UNIX) { /* * Only set up a unix domain socket when they really asked for it. * The service/port is different in that case. */ continue; } /* See if there is still room to add 1 more socket. */ for (; listen_index < MaxListen; listen_index++) { if (ListenSocket[listen_index] == PGINVALID_SOCKET) break; } if (listen_index >= MaxListen) { ereport(LOG, (errmsg("could not bind to all requested addresses: MAXLISTEN (%d) exceeded", MaxListen))); break; } /* set up address family name for log messages */ switch (addr->ai_family) { case AF_INET: familyDesc = _("IPv4"); break; case AF_INET6: familyDesc = _("IPv6"); break; case AF_UNIX: familyDesc = _("Unix"); break; default: snprintf(familyDescBuf, sizeof(familyDescBuf), _("unrecognized address family %d"), addr->ai_family); familyDesc = familyDescBuf; break; } /* set up text form of address for log messages */ if (addr->ai_family == AF_UNIX) addrDesc = unixSocketPath; else { pg_getnameinfo_all((const struct sockaddr_storage *) addr->ai_addr, addr->ai_addrlen, addrBuf, sizeof(addrBuf), NULL, 0, NI_NUMERICHOST); addrDesc = addrBuf; } if ((fd = socket(addr->ai_family, SOCK_STREAM, 0)) == PGINVALID_SOCKET) { ereport(LOG, (errcode_for_socket_access(), /* translator: first %s is IPv4, IPv6, or Unix */ errmsg("could not create %s socket for address \"%s\": %m", familyDesc, addrDesc))); continue; } #ifndef WIN32 /* * Without the SO_REUSEADDR flag, a new postmaster can't be started * right away after a stop or crash, giving "address already in use" * error on TCP ports. * * On win32, however, this behavior only happens if the * SO_EXCLUSIVEADDRUSE is set. With SO_REUSEADDR, win32 allows * multiple servers to listen on the same address, resulting in * unpredictable behavior. With no flags at all, win32 behaves as Unix * with SO_REUSEADDR. */ if (addr->ai_family != AF_UNIX) { if ((setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, (char *) &one, sizeof(one))) == -1) { ereport(LOG, (errcode_for_socket_access(), /* translator: third %s is IPv4, IPv6, or Unix */ errmsg("%s(%s) failed for %s address \"%s\": %m", "setsockopt", "SO_REUSEADDR", familyDesc, addrDesc))); closesocket(fd); continue; } } #endif #ifdef IPV6_V6ONLY if (addr->ai_family == AF_INET6) { if (setsockopt(fd, IPPROTO_IPV6, IPV6_V6ONLY, (char *) &one, sizeof(one)) == -1) { ereport(LOG, (errcode_for_socket_access(), /* translator: third %s is IPv4, IPv6, or Unix */ errmsg("%s(%s) failed for %s address \"%s\": %m", "setsockopt", "IPV6_V6ONLY", familyDesc, addrDesc))); closesocket(fd); continue; } } #endif /* * Note: This might fail on some OS's, like Linux older than * 2.4.21-pre3, that don't have the IPV6_V6ONLY socket option, and map * ipv4 addresses to ipv6. It will show ::ffff:ipv4 for all ipv4 * connections. */ err = bind(fd, addr->ai_addr, addr->ai_addrlen); if (err < 0) { int saved_errno = errno; ereport(LOG, (errcode_for_socket_access(), /* translator: first %s is IPv4, IPv6, or Unix */ errmsg("could not bind %s address \"%s\": %m", familyDesc, addrDesc), saved_errno == EADDRINUSE ? (addr->ai_family == AF_UNIX ? errhint("Is another postmaster already running on port %d?", (int) portNumber) : errhint("Is another postmaster already running on port %d?" " If not, wait a few seconds and retry.", (int) portNumber)) : 0)); closesocket(fd); continue; } if (addr->ai_family == AF_UNIX) { if (Setup_AF_UNIX(service) != STATUS_OK) { closesocket(fd); break; } } /* * Select appropriate accept-queue length limit. It seems reasonable * to use a value similar to the maximum number of child processes * that the postmaster will permit. */ maxconn = MaxConnections * 2; err = listen(fd, maxconn); if (err < 0) { ereport(LOG, (errcode_for_socket_access(), /* translator: first %s is IPv4, IPv6, or Unix */ errmsg("could not listen on %s address \"%s\": %m", familyDesc, addrDesc))); closesocket(fd); continue; } if (addr->ai_family == AF_UNIX) ereport(LOG, (errmsg("listening on Unix socket \"%s\"", addrDesc))); else ereport(LOG, /* translator: first %s is IPv4 or IPv6 */ (errmsg("listening on %s address \"%s\", port %d", familyDesc, addrDesc, (int) portNumber))); ListenSocket[listen_index] = fd; added++; } pg_freeaddrinfo_all(hint.ai_family, addrs); if (!added) return STATUS_ERROR; return STATUS_OK; } /* * Lock_AF_UNIX -- configure unix socket file path */ static int Lock_AF_UNIX(const char *unixSocketDir, const char *unixSocketPath) { /* no lock file for abstract sockets */ if (unixSocketPath[0] == '@') return STATUS_OK; /* * Grab an interlock file associated with the socket file. * * Note: there are two reasons for using a socket lock file, rather than * trying to interlock directly on the socket itself. First, it's a lot * more portable, and second, it lets us remove any pre-existing socket * file without race conditions. */ CreateSocketLockFile(unixSocketPath, true, unixSocketDir); /* * Once we have the interlock, we can safely delete any pre-existing * socket file to avoid failure at bind() time. */ (void) unlink(unixSocketPath); /* * Remember socket file pathnames for later maintenance. */ sock_paths = lappend(sock_paths, pstrdup(unixSocketPath)); return STATUS_OK; } /* * Setup_AF_UNIX -- configure unix socket permissions */ static int Setup_AF_UNIX(const char *sock_path) { /* no file system permissions for abstract sockets */ if (sock_path[0] == '@') return STATUS_OK; /* * Fix socket ownership/permission if requested. Note we must do this * before we listen() to avoid a window where unwanted connections could * get accepted. */ Assert(Unix_socket_group); if (Unix_socket_group[0] != '\0') { #ifdef WIN32 elog(WARNING, "configuration item unix_socket_group is not supported on this platform"); #else char *endptr; unsigned long val; gid_t gid; val = strtoul(Unix_socket_group, &endptr, 10); if (*endptr == '\0') { /* numeric group id */ gid = val; } else { /* convert group name to id */ struct group *gr; gr = getgrnam(Unix_socket_group); if (!gr) { ereport(LOG, (errmsg("group \"%s\" does not exist", Unix_socket_group))); return STATUS_ERROR; } gid = gr->gr_gid; } if (chown(sock_path, -1, gid) == -1) { ereport(LOG, (errcode_for_file_access(), errmsg("could not set group of file \"%s\": %m", sock_path))); return STATUS_ERROR; } #endif } if (chmod(sock_path, Unix_socket_permissions) == -1) { ereport(LOG, (errcode_for_file_access(), errmsg("could not set permissions of file \"%s\": %m", sock_path))); return STATUS_ERROR; } return STATUS_OK; } /* * StreamConnection -- create a new connection with client using * server port. Set port->sock to the FD of the new connection. * * ASSUME: that this doesn't need to be non-blocking because * the Postmaster waits for the socket to be ready to accept(). * * RETURNS: STATUS_OK or STATUS_ERROR */ int StreamConnection(pgsocket server_fd, Port *port) { /* accept connection and fill in the client (remote) address */ port->raddr.salen = sizeof(port->raddr.addr); if ((port->sock = accept(server_fd, (struct sockaddr *) &port->raddr.addr, &port->raddr.salen)) == PGINVALID_SOCKET) { ereport(LOG, (errcode_for_socket_access(), errmsg("could not accept new connection: %m"))); /* * If accept() fails then postmaster.c will still see the server * socket as read-ready, and will immediately try again. To avoid * uselessly sucking lots of CPU, delay a bit before trying again. * (The most likely reason for failure is being out of kernel file * table slots; we can do little except hope some will get freed up.) */ pg_usleep(100000L); /* wait 0.1 sec */ return STATUS_ERROR; } /* fill in the server (local) address */ port->laddr.salen = sizeof(port->laddr.addr); if (getsockname(port->sock, (struct sockaddr *) &port->laddr.addr, &port->laddr.salen) < 0) { ereport(LOG, (errmsg("%s() failed: %m", "getsockname"))); return STATUS_ERROR; } /* select NODELAY and KEEPALIVE options if it's a TCP connection */ if (port->laddr.addr.ss_family != AF_UNIX) { int on; #ifdef WIN32 int oldopt; int optlen; int newopt; #endif #ifdef TCP_NODELAY on = 1; if (setsockopt(port->sock, IPPROTO_TCP, TCP_NODELAY, (char *) &on, sizeof(on)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", "TCP_NODELAY"))); return STATUS_ERROR; } #endif on = 1; if (setsockopt(port->sock, SOL_SOCKET, SO_KEEPALIVE, (char *) &on, sizeof(on)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", "SO_KEEPALIVE"))); return STATUS_ERROR; } #ifdef WIN32 /* * This is a Win32 socket optimization. The OS send buffer should be * large enough to send the whole Postgres send buffer in one go, or * performance suffers. The Postgres send buffer can be enlarged if a * very large message needs to be sent, but we won't attempt to * enlarge the OS buffer if that happens, so somewhat arbitrarily * ensure that the OS buffer is at least PQ_SEND_BUFFER_SIZE * 4. * (That's 32kB with the current default). * * The default OS buffer size used to be 8kB in earlier Windows * versions, but was raised to 64kB in Windows 2012. So it shouldn't * be necessary to change it in later versions anymore. Changing it * unnecessarily can even reduce performance, because setting * SO_SNDBUF in the application disables the "dynamic send buffering" * feature that was introduced in Windows 7. So before fiddling with * SO_SNDBUF, check if the current buffer size is already large enough * and only increase it if necessary. * * See https://support.microsoft.com/kb/823764/EN-US/ and * https://msdn.microsoft.com/en-us/library/bb736549%28v=vs.85%29.aspx */ optlen = sizeof(oldopt); if (getsockopt(port->sock, SOL_SOCKET, SO_SNDBUF, (char *) &oldopt, &optlen) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "getsockopt", "SO_SNDBUF"))); return STATUS_ERROR; } newopt = PQ_SEND_BUFFER_SIZE * 4; if (oldopt < newopt) { if (setsockopt(port->sock, SOL_SOCKET, SO_SNDBUF, (char *) &newopt, sizeof(newopt)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", "SO_SNDBUF"))); return STATUS_ERROR; } } #endif /* * Also apply the current keepalive parameters. If we fail to set a * parameter, don't error out, because these aren't universally * supported. (Note: you might think we need to reset the GUC * variables to 0 in such a case, but it's not necessary because the * show hooks for these variables report the truth anyway.) */ (void) pq_setkeepalivesidle(tcp_keepalives_idle, port); (void) pq_setkeepalivesinterval(tcp_keepalives_interval, port); (void) pq_setkeepalivescount(tcp_keepalives_count, port); (void) pq_settcpusertimeout(tcp_user_timeout, port); } return STATUS_OK; } /* * StreamClose -- close a client/backend connection * * NOTE: this is NOT used to terminate a session; it is just used to release * the file descriptor in a process that should no longer have the socket * open. (For example, the postmaster calls this after passing ownership * of the connection to a child process.) It is expected that someone else * still has the socket open. So, we only want to close the descriptor, * we do NOT want to send anything to the far end. */ void StreamClose(pgsocket sock) { closesocket(sock); } /* * TouchSocketFiles -- mark socket files as recently accessed * * This routine should be called every so often to ensure that the socket * files have a recent mod date (ordinary operations on sockets usually won't * change the mod date). That saves them from being removed by * overenthusiastic /tmp-directory-cleaner daemons. (Another reason we should * never have put the socket file in /tmp...) */ void TouchSocketFiles(void) { ListCell *l; /* Loop through all created sockets... */ foreach(l, sock_paths) { char *sock_path = (char *) lfirst(l); /* Ignore errors; there's no point in complaining */ (void) utime(sock_path, NULL); } } /* * RemoveSocketFiles -- unlink socket files at postmaster shutdown */ void RemoveSocketFiles(void) { ListCell *l; /* Loop through all created sockets... */ foreach(l, sock_paths) { char *sock_path = (char *) lfirst(l); /* Ignore any error. */ (void) unlink(sock_path); } /* Since we're about to exit, no need to reclaim storage */ sock_paths = NIL; } /* -------------------------------- * Low-level I/O routines begin here. * * These routines communicate with a frontend client across a connection * already established by the preceding routines. * -------------------------------- */ /* -------------------------------- * socket_set_nonblocking - set socket blocking/non-blocking * * Sets the socket non-blocking if nonblocking is true, or sets it * blocking otherwise. * -------------------------------- */ static void socket_set_nonblocking(bool nonblocking) { if (MyProcPort == NULL) ereport(ERROR, (errcode(ERRCODE_CONNECTION_DOES_NOT_EXIST), errmsg("there is no client connection"))); MyProcPort->noblock = nonblocking; } /* -------------------------------- * pq_recvbuf - load some bytes into the input buffer * * returns 0 if OK, EOF if trouble * -------------------------------- */ static int pq_recvbuf(void) { if (PqRecvPointer > 0) { if (PqRecvLength > PqRecvPointer) { /* still some unread data, left-justify it in the buffer */ memmove(PqRecvBuffer, PqRecvBuffer + PqRecvPointer, PqRecvLength - PqRecvPointer); PqRecvLength -= PqRecvPointer; PqRecvPointer = 0; } else PqRecvLength = PqRecvPointer = 0; } /* Ensure that we're in blocking mode */ socket_set_nonblocking(false); /* Can fill buffer from PqRecvLength and upwards */ for (;;) { int r; errno = 0; r = secure_read(MyProcPort, PqRecvBuffer + PqRecvLength, PQ_RECV_BUFFER_SIZE - PqRecvLength); if (r < 0) { if (errno == EINTR) continue; /* Ok if interrupted */ /* * Careful: an ereport() that tries to write to the client would * cause recursion to here, leading to stack overflow and core * dump! This message must go *only* to the postmaster log. * * If errno is zero, assume it's EOF and let the caller complain. */ if (errno != 0) ereport(COMMERROR, (errcode_for_socket_access(), errmsg("could not receive data from client: %m"))); return EOF; } if (r == 0) { /* * EOF detected. We used to write a log message here, but it's * better to expect the ultimate caller to do that. */ return EOF; } /* r contains number of bytes read, so just incr length */ PqRecvLength += r; return 0; } } /* -------------------------------- * pq_getbyte - get a single byte from connection, or return EOF * -------------------------------- */ int pq_getbyte(void) { Assert(PqCommReadingMsg); while (PqRecvPointer >= PqRecvLength) { if (pq_recvbuf()) /* If nothing in buffer, then recv some */ return EOF; /* Failed to recv data */ } return (unsigned char) PqRecvBuffer[PqRecvPointer++]; } /* -------------------------------- * pq_peekbyte - peek at next byte from connection * * Same as pq_getbyte() except we don't advance the pointer. * -------------------------------- */ int pq_peekbyte(void) { Assert(PqCommReadingMsg); while (PqRecvPointer >= PqRecvLength) { if (pq_recvbuf()) /* If nothing in buffer, then recv some */ return EOF; /* Failed to recv data */ } return (unsigned char) PqRecvBuffer[PqRecvPointer]; } /* -------------------------------- * pq_getbyte_if_available - get a single byte from connection, * if available * * The received byte is stored in *c. Returns 1 if a byte was read, * 0 if no data was available, or EOF if trouble. * -------------------------------- */ int pq_getbyte_if_available(unsigned char *c) { int r; Assert(PqCommReadingMsg); if (PqRecvPointer < PqRecvLength) { *c = PqRecvBuffer[PqRecvPointer++]; return 1; } /* Put the socket into non-blocking mode */ socket_set_nonblocking(true); errno = 0; r = secure_read(MyProcPort, c, 1); if (r < 0) { /* * Ok if no data available without blocking or interrupted (though * EINTR really shouldn't happen with a non-blocking socket). Report * other errors. */ if (errno == EAGAIN || errno == EWOULDBLOCK || errno == EINTR) r = 0; else { /* * Careful: an ereport() that tries to write to the client would * cause recursion to here, leading to stack overflow and core * dump! This message must go *only* to the postmaster log. * * If errno is zero, assume it's EOF and let the caller complain. */ if (errno != 0) ereport(COMMERROR, (errcode_for_socket_access(), errmsg("could not receive data from client: %m"))); r = EOF; } } else if (r == 0) { /* EOF detected */ r = EOF; } return r; } /* -------------------------------- * pq_getbytes - get a known number of bytes from connection * * returns 0 if OK, EOF if trouble * -------------------------------- */ int pq_getbytes(char *s, size_t len) { size_t amount; Assert(PqCommReadingMsg); while (len > 0) { while (PqRecvPointer >= PqRecvLength) { if (pq_recvbuf()) /* If nothing in buffer, then recv some */ return EOF; /* Failed to recv data */ } amount = PqRecvLength - PqRecvPointer; if (amount > len) amount = len; memcpy(s, PqRecvBuffer + PqRecvPointer, amount); PqRecvPointer += amount; s += amount; len -= amount; } return 0; } /* -------------------------------- * pq_discardbytes - throw away a known number of bytes * * same as pq_getbytes except we do not copy the data to anyplace. * this is used for resynchronizing after read errors. * * returns 0 if OK, EOF if trouble * -------------------------------- */ static int pq_discardbytes(size_t len) { size_t amount; Assert(PqCommReadingMsg); while (len > 0) { while (PqRecvPointer >= PqRecvLength) { if (pq_recvbuf()) /* If nothing in buffer, then recv some */ return EOF; /* Failed to recv data */ } amount = PqRecvLength - PqRecvPointer; if (amount > len) amount = len; PqRecvPointer += amount; len -= amount; } return 0; } /* -------------------------------- * pq_buffer_has_data - is any buffered data available to read? * * This will *not* attempt to read more data. * -------------------------------- */ bool pq_buffer_has_data(void) { return (PqRecvPointer < PqRecvLength); } /* -------------------------------- * pq_startmsgread - begin reading a message from the client. * * This must be called before any of the pq_get* functions. * -------------------------------- */ void pq_startmsgread(void) { /* * There shouldn't be a read active already, but let's check just to be * sure. */ if (PqCommReadingMsg) ereport(FATAL, (errcode(ERRCODE_PROTOCOL_VIOLATION), errmsg("terminating connection because protocol synchronization was lost"))); PqCommReadingMsg = true; } /* -------------------------------- * pq_endmsgread - finish reading message. * * This must be called after reading a message with pq_getbytes() * and friends, to indicate that we have read the whole message. * pq_getmessage() does this implicitly. * -------------------------------- */ void pq_endmsgread(void) { Assert(PqCommReadingMsg); PqCommReadingMsg = false; } /* -------------------------------- * pq_is_reading_msg - are we currently reading a message? * * This is used in error recovery at the outer idle loop to detect if we have * lost protocol sync, and need to terminate the connection. pq_startmsgread() * will check for that too, but it's nicer to detect it earlier. * -------------------------------- */ bool pq_is_reading_msg(void) { return PqCommReadingMsg; } /* -------------------------------- * pq_getmessage - get a message with length word from connection * * The return value is placed in an expansible StringInfo, which has * already been initialized by the caller. * Only the message body is placed in the StringInfo; the length word * is removed. Also, s->cursor is initialized to zero for convenience * in scanning the message contents. * * maxlen is the upper limit on the length of the * message we are willing to accept. We abort the connection (by * returning EOF) if client tries to send more than that. * * returns 0 if OK, EOF if trouble * -------------------------------- */ int pq_getmessage(StringInfo s, int maxlen) { int32 len; Assert(PqCommReadingMsg); resetStringInfo(s); /* Read message length word */ if (pq_getbytes((char *) &len, 4) == EOF) { ereport(COMMERROR, (errcode(ERRCODE_PROTOCOL_VIOLATION), errmsg("unexpected EOF within message length word"))); return EOF; } len = pg_ntoh32(len); if (len < 4 || len > maxlen) { ereport(COMMERROR, (errcode(ERRCODE_PROTOCOL_VIOLATION), errmsg("invalid message length"))); return EOF; } len -= 4; /* discount length itself */ if (len > 0) { /* * Allocate space for message. If we run out of room (ridiculously * large message), we will elog(ERROR), but we want to discard the * message body so as not to lose communication sync. */ PG_TRY(); { enlargeStringInfo(s, len); } PG_CATCH(); { if (pq_discardbytes(len) == EOF) ereport(COMMERROR, (errcode(ERRCODE_PROTOCOL_VIOLATION), errmsg("incomplete message from client"))); /* we discarded the rest of the message so we're back in sync. */ PqCommReadingMsg = false; PG_RE_THROW(); } PG_END_TRY(); /* And grab the message */ if (pq_getbytes(s->data, len) == EOF) { ereport(COMMERROR, (errcode(ERRCODE_PROTOCOL_VIOLATION), errmsg("incomplete message from client"))); return EOF; } s->len = len; /* Place a trailing null per StringInfo convention */ s->data[len] = '\0'; } /* finished reading the message. */ PqCommReadingMsg = false; return 0; } static int internal_putbytes(const char *s, size_t len) { size_t amount; while (len > 0) { /* If buffer is full, then flush it out */ if (PqSendPointer >= PqSendBufferSize) { socket_set_nonblocking(false); if (internal_flush()) return EOF; } amount = PqSendBufferSize - PqSendPointer; if (amount > len) amount = len; memcpy(PqSendBuffer + PqSendPointer, s, amount); PqSendPointer += amount; s += amount; len -= amount; } return 0; } /* -------------------------------- * socket_flush - flush pending output * * returns 0 if OK, EOF if trouble * -------------------------------- */ static int socket_flush(void) { int res; /* No-op if reentrant call */ if (PqCommBusy) return 0; PqCommBusy = true; socket_set_nonblocking(false); res = internal_flush(); PqCommBusy = false; return res; } /* -------------------------------- * internal_flush - flush pending output * * Returns 0 if OK (meaning everything was sent, or operation would block * and the socket is in non-blocking mode), or EOF if trouble. * -------------------------------- */ static int internal_flush(void) { static int last_reported_send_errno = 0; char *bufptr = PqSendBuffer + PqSendStart; char *bufend = PqSendBuffer + PqSendPointer; while (bufptr < bufend) { int r; r = secure_write(MyProcPort, bufptr, bufend - bufptr); if (r <= 0) { if (errno == EINTR) continue; /* Ok if we were interrupted */ /* * Ok if no data writable without blocking, and the socket is in * non-blocking mode. */ if (errno == EAGAIN || errno == EWOULDBLOCK) { return 0; } /* * Careful: an ereport() that tries to write to the client would * cause recursion to here, leading to stack overflow and core * dump! This message must go *only* to the postmaster log. * * If a client disconnects while we're in the midst of output, we * might write quite a bit of data before we get to a safe query * abort point. So, suppress duplicate log messages. */ if (errno != last_reported_send_errno) { last_reported_send_errno = errno; ereport(COMMERROR, (errcode_for_socket_access(), errmsg("could not send data to client: %m"))); } /* * We drop the buffered data anyway so that processing can * continue, even though we'll probably quit soon. We also set a * flag that'll cause the next CHECK_FOR_INTERRUPTS to terminate * the connection. */ PqSendStart = PqSendPointer = 0; ClientConnectionLost = 1; InterruptPending = 1; return EOF; } last_reported_send_errno = 0; /* reset after any successful send */ bufptr += r; PqSendStart += r; } PqSendStart = PqSendPointer = 0; return 0; } /* -------------------------------- * pq_flush_if_writable - flush pending output if writable without blocking * * Returns 0 if OK, or EOF if trouble. * -------------------------------- */ static int socket_flush_if_writable(void) { int res; /* Quick exit if nothing to do */ if (PqSendPointer == PqSendStart) return 0; /* No-op if reentrant call */ if (PqCommBusy) return 0; /* Temporarily put the socket into non-blocking mode */ socket_set_nonblocking(true); PqCommBusy = true; res = internal_flush(); PqCommBusy = false; return res; } /* -------------------------------- * socket_is_send_pending - is there any pending data in the output buffer? * -------------------------------- */ static bool socket_is_send_pending(void) { return (PqSendStart < PqSendPointer); } /* -------------------------------- * Message-level I/O routines begin here. * -------------------------------- */ /* -------------------------------- * socket_putmessage - send a normal message (suppressed in COPY OUT mode) * * msgtype is a message type code to place before the message body. * * len is the length of the message body data at *s. A message length * word (equal to len+4 because it counts itself too) is inserted by this * routine. * * We suppress messages generated while pqcomm.c is busy. This * avoids any possibility of messages being inserted within other * messages. The only known trouble case arises if SIGQUIT occurs * during a pqcomm.c routine --- quickdie() will try to send a warning * message, and the most reasonable approach seems to be to drop it. * * returns 0 if OK, EOF if trouble * -------------------------------- */ static int socket_putmessage(char msgtype, const char *s, size_t len) { uint32 n32; Assert(msgtype != 0); if (PqCommBusy) return 0; PqCommBusy = true; if (internal_putbytes(&msgtype, 1)) goto fail; n32 = pg_hton32((uint32) (len + 4)); if (internal_putbytes((char *) &n32, 4)) goto fail; if (internal_putbytes(s, len)) goto fail; PqCommBusy = false; return 0; fail: PqCommBusy = false; return EOF; } /* -------------------------------- * pq_putmessage_noblock - like pq_putmessage, but never blocks * * If the output buffer is too small to hold the message, the buffer * is enlarged. */ static void socket_putmessage_noblock(char msgtype, const char *s, size_t len) { int res PG_USED_FOR_ASSERTS_ONLY; int required; /* * Ensure we have enough space in the output buffer for the message header * as well as the message itself. */ required = PqSendPointer + 1 + 4 + len; if (required > PqSendBufferSize) { PqSendBuffer = repalloc(PqSendBuffer, required); PqSendBufferSize = required; } res = pq_putmessage(msgtype, s, len); Assert(res == 0); /* should not fail when the message fits in * buffer */ } /* -------------------------------- * pq_putmessage_v2 - send a message in protocol version 2 * * msgtype is a message type code to place before the message body. * * We no longer support protocol version 2, but we have kept this * function so that if a client tries to connect with protocol version 2, * as a courtesy we can still send the "unsupported protocol version" * error to the client in the old format. * * Like in pq_putmessage(), we suppress messages generated while * pqcomm.c is busy. * * returns 0 if OK, EOF if trouble * -------------------------------- */ int pq_putmessage_v2(char msgtype, const char *s, size_t len) { Assert(msgtype != 0); if (PqCommBusy) return 0; PqCommBusy = true; if (internal_putbytes(&msgtype, 1)) goto fail; if (internal_putbytes(s, len)) goto fail; PqCommBusy = false; return 0; fail: PqCommBusy = false; return EOF; } /* * Support for TCP Keepalive parameters */ /* * On Windows, we need to set both idle and interval at the same time. * We also cannot reset them to the default (setting to zero will * actually set them to zero, not default), therefore we fallback to * the out-of-the-box default instead. */ #if defined(WIN32) && defined(SIO_KEEPALIVE_VALS) static int pq_setkeepaliveswin32(Port *port, int idle, int interval) { struct tcp_keepalive ka; DWORD retsize; if (idle <= 0) idle = 2 * 60 * 60; /* default = 2 hours */ if (interval <= 0) interval = 1; /* default = 1 second */ ka.onoff = 1; ka.keepalivetime = idle * 1000; ka.keepaliveinterval = interval * 1000; if (WSAIoctl(port->sock, SIO_KEEPALIVE_VALS, (LPVOID) &ka, sizeof(ka), NULL, 0, &retsize, NULL, NULL) != 0) { ereport(LOG, (errmsg("%s(%s) failed: error code %d", "WSAIoctl", "SIO_KEEPALIVE_VALS", WSAGetLastError()))); return STATUS_ERROR; } if (port->keepalives_idle != idle) port->keepalives_idle = idle; if (port->keepalives_interval != interval) port->keepalives_interval = interval; return STATUS_OK; } #endif int pq_getkeepalivesidle(Port *port) { #if defined(PG_TCP_KEEPALIVE_IDLE) || defined(SIO_KEEPALIVE_VALS) if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return 0; if (port->keepalives_idle != 0) return port->keepalives_idle; if (port->default_keepalives_idle == 0) { #ifndef WIN32 socklen_t size = sizeof(port->default_keepalives_idle); if (getsockopt(port->sock, IPPROTO_TCP, PG_TCP_KEEPALIVE_IDLE, (char *) &port->default_keepalives_idle, &size) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "getsockopt", PG_TCP_KEEPALIVE_IDLE_STR))); port->default_keepalives_idle = -1; /* don't know */ } #else /* WIN32 */ /* We can't get the defaults on Windows, so return "don't know" */ port->default_keepalives_idle = -1; #endif /* WIN32 */ } return port->default_keepalives_idle; #else return 0; #endif } int pq_setkeepalivesidle(int idle, Port *port) { if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return STATUS_OK; /* check SIO_KEEPALIVE_VALS here, not just WIN32, as some toolchains lack it */ #if defined(PG_TCP_KEEPALIVE_IDLE) || defined(SIO_KEEPALIVE_VALS) if (idle == port->keepalives_idle) return STATUS_OK; #ifndef WIN32 if (port->default_keepalives_idle <= 0) { if (pq_getkeepalivesidle(port) < 0) { if (idle == 0) return STATUS_OK; /* default is set but unknown */ else return STATUS_ERROR; } } if (idle == 0) idle = port->default_keepalives_idle; if (setsockopt(port->sock, IPPROTO_TCP, PG_TCP_KEEPALIVE_IDLE, (char *) &idle, sizeof(idle)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", PG_TCP_KEEPALIVE_IDLE_STR))); return STATUS_ERROR; } port->keepalives_idle = idle; #else /* WIN32 */ return pq_setkeepaliveswin32(port, idle, port->keepalives_interval); #endif #else if (idle != 0) { ereport(LOG, (errmsg("setting the keepalive idle time is not supported"))); return STATUS_ERROR; } #endif return STATUS_OK; } int pq_getkeepalivesinterval(Port *port) { #if defined(TCP_KEEPINTVL) || defined(SIO_KEEPALIVE_VALS) if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return 0; if (port->keepalives_interval != 0) return port->keepalives_interval; if (port->default_keepalives_interval == 0) { #ifndef WIN32 socklen_t size = sizeof(port->default_keepalives_interval); if (getsockopt(port->sock, IPPROTO_TCP, TCP_KEEPINTVL, (char *) &port->default_keepalives_interval, &size) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "getsockopt", "TCP_KEEPINTVL"))); port->default_keepalives_interval = -1; /* don't know */ } #else /* We can't get the defaults on Windows, so return "don't know" */ port->default_keepalives_interval = -1; #endif /* WIN32 */ } return port->default_keepalives_interval; #else return 0; #endif } int pq_setkeepalivesinterval(int interval, Port *port) { if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return STATUS_OK; #if defined(TCP_KEEPINTVL) || defined(SIO_KEEPALIVE_VALS) if (interval == port->keepalives_interval) return STATUS_OK; #ifndef WIN32 if (port->default_keepalives_interval <= 0) { if (pq_getkeepalivesinterval(port) < 0) { if (interval == 0) return STATUS_OK; /* default is set but unknown */ else return STATUS_ERROR; } } if (interval == 0) interval = port->default_keepalives_interval; if (setsockopt(port->sock, IPPROTO_TCP, TCP_KEEPINTVL, (char *) &interval, sizeof(interval)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", "TCP_KEEPINTVL"))); return STATUS_ERROR; } port->keepalives_interval = interval; #else /* WIN32 */ return pq_setkeepaliveswin32(port, port->keepalives_idle, interval); #endif #else if (interval != 0) { ereport(LOG, (errmsg("%s(%s) not supported", "setsockopt", "TCP_KEEPINTVL"))); return STATUS_ERROR; } #endif return STATUS_OK; } int pq_getkeepalivescount(Port *port) { #ifdef TCP_KEEPCNT if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return 0; if (port->keepalives_count != 0) return port->keepalives_count; if (port->default_keepalives_count == 0) { socklen_t size = sizeof(port->default_keepalives_count); if (getsockopt(port->sock, IPPROTO_TCP, TCP_KEEPCNT, (char *) &port->default_keepalives_count, &size) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "getsockopt", "TCP_KEEPCNT"))); port->default_keepalives_count = -1; /* don't know */ } } return port->default_keepalives_count; #else return 0; #endif } int pq_setkeepalivescount(int count, Port *port) { if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return STATUS_OK; #ifdef TCP_KEEPCNT if (count == port->keepalives_count) return STATUS_OK; if (port->default_keepalives_count <= 0) { if (pq_getkeepalivescount(port) < 0) { if (count == 0) return STATUS_OK; /* default is set but unknown */ else return STATUS_ERROR; } } if (count == 0) count = port->default_keepalives_count; if (setsockopt(port->sock, IPPROTO_TCP, TCP_KEEPCNT, (char *) &count, sizeof(count)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", "TCP_KEEPCNT"))); return STATUS_ERROR; } port->keepalives_count = count; #else if (count != 0) { ereport(LOG, (errmsg("%s(%s) not supported", "setsockopt", "TCP_KEEPCNT"))); return STATUS_ERROR; } #endif return STATUS_OK; } int pq_gettcpusertimeout(Port *port) { #ifdef TCP_USER_TIMEOUT if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return 0; if (port->tcp_user_timeout != 0) return port->tcp_user_timeout; if (port->default_tcp_user_timeout == 0) { socklen_t size = sizeof(port->default_tcp_user_timeout); if (getsockopt(port->sock, IPPROTO_TCP, TCP_USER_TIMEOUT, (char *) &port->default_tcp_user_timeout, &size) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "getsockopt", "TCP_USER_TIMEOUT"))); port->default_tcp_user_timeout = -1; /* don't know */ } } return port->default_tcp_user_timeout; #else return 0; #endif } int pq_settcpusertimeout(int timeout, Port *port) { if (port == NULL || port->laddr.addr.ss_family == AF_UNIX) return STATUS_OK; #ifdef TCP_USER_TIMEOUT if (timeout == port->tcp_user_timeout) return STATUS_OK; if (port->default_tcp_user_timeout <= 0) { if (pq_gettcpusertimeout(port) < 0) { if (timeout == 0) return STATUS_OK; /* default is set but unknown */ else return STATUS_ERROR; } } if (timeout == 0) timeout = port->default_tcp_user_timeout; if (setsockopt(port->sock, IPPROTO_TCP, TCP_USER_TIMEOUT, (char *) &timeout, sizeof(timeout)) < 0) { ereport(LOG, (errmsg("%s(%s) failed: %m", "setsockopt", "TCP_USER_TIMEOUT"))); return STATUS_ERROR; } port->tcp_user_timeout = timeout; #else if (timeout != 0) { ereport(LOG, (errmsg("%s(%s) not supported", "setsockopt", "TCP_USER_TIMEOUT"))); return STATUS_ERROR; } #endif return STATUS_OK; } /* * GUC assign_hook for tcp_keepalives_idle */ void assign_tcp_keepalives_idle(int newval, void *extra) { /* * The kernel API provides no way to test a value without setting it; and * once we set it we might fail to unset it. So there seems little point * in fully implementing the check-then-assign GUC API for these * variables. Instead we just do the assignment on demand. * pq_setkeepalivesidle reports any problems via ereport(LOG). * * This approach means that the GUC value might have little to do with the * actual kernel value, so we use a show_hook that retrieves the kernel * value rather than trusting GUC's copy. */ (void) pq_setkeepalivesidle(newval, MyProcPort); } /* * GUC show_hook for tcp_keepalives_idle */ const char * show_tcp_keepalives_idle(void) { /* See comments in assign_tcp_keepalives_idle */ static char nbuf[16]; snprintf(nbuf, sizeof(nbuf), "%d", pq_getkeepalivesidle(MyProcPort)); return nbuf; } /* * GUC assign_hook for tcp_keepalives_interval */ void assign_tcp_keepalives_interval(int newval, void *extra) { /* See comments in assign_tcp_keepalives_idle */ (void) pq_setkeepalivesinterval(newval, MyProcPort); } /* * GUC show_hook for tcp_keepalives_interval */ const char * show_tcp_keepalives_interval(void) { /* See comments in assign_tcp_keepalives_idle */ static char nbuf[16]; snprintf(nbuf, sizeof(nbuf), "%d", pq_getkeepalivesinterval(MyProcPort)); return nbuf; } /* * GUC assign_hook for tcp_keepalives_count */ void assign_tcp_keepalives_count(int newval, void *extra) { /* See comments in assign_tcp_keepalives_idle */ (void) pq_setkeepalivescount(newval, MyProcPort); } /* * GUC show_hook for tcp_keepalives_count */ const char * show_tcp_keepalives_count(void) { /* See comments in assign_tcp_keepalives_idle */ static char nbuf[16]; snprintf(nbuf, sizeof(nbuf), "%d", pq_getkeepalivescount(MyProcPort)); return nbuf; } /* * GUC assign_hook for tcp_user_timeout */ void assign_tcp_user_timeout(int newval, void *extra) { /* See comments in assign_tcp_keepalives_idle */ (void) pq_settcpusertimeout(newval, MyProcPort); } /* * GUC show_hook for tcp_user_timeout */ const char * show_tcp_user_timeout(void) { /* See comments in assign_tcp_keepalives_idle */ static char nbuf[16]; snprintf(nbuf, sizeof(nbuf), "%d", pq_gettcpusertimeout(MyProcPort)); return nbuf; } /* * Check if the client is still connected. */ bool pq_check_connection(void) { WaitEvent events[FeBeWaitSetNEvents]; int rc; /* * It's OK to modify the socket event filter without restoring, because * all FeBeWaitSet socket wait sites do the same. */ ModifyWaitEvent(FeBeWaitSet, FeBeWaitSetSocketPos, WL_SOCKET_CLOSED, NULL); retry: rc = WaitEventSetWait(FeBeWaitSet, 0, events, lengthof(events), 0); for (int i = 0; i < rc; ++i) { if (events[i].events & WL_SOCKET_CLOSED) return false; if (events[i].events & WL_LATCH_SET) { /* * A latch event might be preventing other events from being * reported. Reset it and poll again. No need to restore it * because no code should expect latches to survive across * CHECK_FOR_INTERRUPTS(). */ ResetLatch(MyLatch); goto retry; } } return true; }