diff options
Diffstat (limited to '')
| -rw-r--r-- | README.md | 201 |
1 files changed, 201 insertions, 0 deletions
diff --git a/README.md b/README.md new file mode 100644 index 0000000..43bd5b2 --- /dev/null +++ b/README.md @@ -0,0 +1,201 @@ +# PowerTOP + +PowerTOP is a Linux* tool used to diagnose issues with power consumption and +power management. In addition to being a diagnostic tool, PowerTOP also has an +interactive mode you can use to experiment with various power management +settings, for cases where the Linux distribution has not enabled those +settings. + + +# Build dependencies + +PowerTOP is coded in C++. It was written for Linux-based operating systems. +GNU* libc (`glibc`) and Linux `pthreads` are needed for PowerTOP to function +properly. The GNU build system (`autoconf`, `automake`, `make`, `libtool`), as +well as `gettext`, are required to build PowerTOP. + +In addition, PowerTOP requires the following: + +* kernel version => 2.6.38 +* `ncurses-devel` (required) +* `libnl-devel` (required) +* `pciutils-devel` (is only required if you have PCI) +* `autoconf-archive` (for building) + +Example packages to install in Ubuntu*: + + sudo apt install libpci-dev libnl-3-dev libnl-genl-3-dev gettext \ + libgettextpo-dev autopoint gettext libncurses5-dev libncursesw5-dev libtool-bin \ + dh-autoreconf autoconf-archive pkg-config + + +## Building PowerTOP + +The `autogen.sh` script needs to be run only once to generate `configure`. +You need to re-run it only if the build system configuration files +(e.g. `configure.ac`) are modified. The remaining steps are required whenever +source files are modified. + +To build PowerTOP from the cloned source, use the following commands: + + ./autogen.sh + ./configure + make + + +# Running PowerTOP + +The following sections go over basic operation of PowerTOP. This includes +kernel configuration options (or kernel patches) needed for full functionality. +Run `powertop --help` to see all options. + + +## Kernel parameters and (optional) patches + +PowerTOP needs some kernel config options enabled to function +properly. As of linux-3.3.0, these are (the list probably is incomplete): + + CONFIG_NO_HZ + CONFIG_HIGH_RES_TIMERS + CONFIG_HPET_TIMER + CONFIG_CPU_FREQ_GOV_ONDEMAND + CONFIG_USB_SUSPEND + CONFIG_SND_AC97_POWER_SAVE + CONFIG_TIMER_STATS + CONFIG_PERF_EVENTS + CONFIG_PERF_COUNTERS + CONFIG_TRACEPOINTS + CONFIG_TRACING + CONFIG_EVENT_POWER_TRACING_DEPRECATED + CONFIG_X86_MSR + ACPI_PROCFS_POWER + CONFIG_DEBUG_FS + +Use these configs from linux-3.13.rc1: + + CONFIG_POWERCAP + CONFIG_INTEL_RAPL + +The patches in the `patches/` sub-directory are optional but enable *full* +PowerTOP functionality. + + +## Outputting a report + +When PowerTOP is executed as root and without arguments, it runs in +interactive mode. In this mode, PowerTOP most resembles `top`. + +For generating reports, or for filing functional bug reports, there are two +output modes: CSV and HTML. You can set sample times, the number of iterations, +a workload over which to run PowerTOP, and whether to include +`debug`-level output. + +For an HTML report, execute PowerTOP with this option: + + powertop --html=report.html + +This creates a static `report.html` file, suitable for sharing. + +For a CSV report, execute PowerTOP with this option: + + powertop --csv=report.csv + +This creates a static `powertop.csv` file, also suitable for sharing. + +If you wish to file a functional bug report, generate and share a +`debug`-mode HTML report and share it, using the following command: + + powertop --debug --html=report.html + +**Important Note:** As PowerTOP is intended for privileged (`root`) use, your +reports-- especially when run with `--debug`-- will contain verbose system +information. PowerTOP **does not** sanitize, scrub, or otherwise anonymize its +reports. Be mindful of this when sharing reports. + +**Developers:** If you make changes to the HTML reporting code, validate HTML +output by using the W3C* Markup Validation Service and the W3C CSS Validation +Service: +* http://validator.w3.org/#validate_by_upload +* http://jigsaw.w3.org/css-validator/#validate_by_upload + + +## Calibrating and power numbers + +PowerTOP, when running on battery, tracks power consumption and activity on +the system. Once there are sufficient measurements, PowerTOP can start to +report power estimates for various activities. You can help increase the +accuracy of the estimation by running a calibration cycle at least once: + + powertop --calibrate + +*Calibration* entails cycling through various display brightness levels +(including "off"), USB device activities, and other workloads. + + +## Extech Power Analyzer / Datalogger support + +Our analysis teams use the Extech* Power Analyzer/Datalogger (model +number 380803). PowerTOP supports this device over the serial cable by passing +the device node on the command line using this command: + + powertop --extech=/dev/ttyUSB0 + +(where ttyUSB0 is the devicenode of the serial-to-usb adapter on our system) + + +# Contributing to PowerTOP and getting support + +There are numerous ways you and your friends can contribute to PowerTOP. See +the `CONTRIBUTE.md` document for more details. Elevator summary: "fork, and +send PRs!". + +We have a mailing list: `powertop@lists.01.org`: +* Subscribe at: + * https://lists.01.org/postorius/lists/powertop.lists.01.org/ +* Browse archives at: + * https://lists.01.org/hyperkitty/list/powertop@lists.01.org/ + +If you find bugs, you can file an issue-- see `CONTRIBUTE.md` for further +details: +* File bugs/wishes at: + * https://github.com/fenrus75/powertop/issues + + +# Code from other open source projects + +PowerTOP contains some code from other open source projects; we'd like to thank +the authors of those projects for their work. Specifically, PowerTOP contains +code from + +``` +Parse Event Library - Copyright 2009, 2010 Red Hat Inc Steven Rostedt <srostedt@redhat.com> +nl80211 userspace tool - Copyright 2007, 2008 Johannes Berg <johannes@sipsolutions.net> +``` + + +# Copyright and License + + PowerTOP + Copyright (C) 2020 Intel Corporation + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; version 2. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + +See `COPYING` file for a copy of the aforementioned (GPLv2) license. + + +## SPDX Tag + + /* SPDX-License-Identifier: GPL-2.0-only */ + +From: https://spdx.org/licenses/GPL-2.0-only.html |