# Makefile.in generated by automake 1.16.5 from Makefile.am.
# @configure_input@

# Copyright (C) 1994-2021 Free Software Foundation, Inc.

# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

# -*- Mode: Makefile -*-
#
# Makefile.am - automake file for Raptor RDF/XML tests
#
# Copyright (C) 2000-2008, David Beckett http://purl.org/net/dajobe/
# Copyright (C) 2000-2004, University of Bristol, UK http://www.bristol.ac.uk/
# 
# This package is Free Software and part of Redland http://librdf.org/
# 
# It is licensed under the following three licenses as alternatives:
#   1. GNU Lesser General Public License (LGPL) V2.1 or any newer version
#   2. GNU General Public License (GPL) V2 or any newer version
#   3. Apache License, V2.0 or any newer version
# 
# You may not use this file except in compliance with at least one of
# the above three licenses.
# 
# See LICENSE.html or LICENSE.txt at the top of this package for the
# complete terms and further detail along with the license texts for
# the licenses in COPYING.LIB, COPYING and LICENSE-2.0.txt respectively.
# 
# 
VPATH = @srcdir@
am__is_gnu_make = { \
  if test -z '$(MAKELEVEL)'; then \
    false; \
  elif test -n '$(MAKE_HOST)'; then \
    true; \
  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
    true; \
  else \
    false; \
  fi; \
}
am__make_running_with_option = \
  case $${target_option-} in \
      ?) ;; \
      *) echo "am__make_running_with_option: internal error: invalid" \
              "target option '$${target_option-}' specified" >&2; \
         exit 1;; \
  esac; \
  has_opt=no; \
  sane_makeflags=$$MAKEFLAGS; \
  if $(am__is_gnu_make); then \
    sane_makeflags=$$MFLAGS; \
  else \
    case $$MAKEFLAGS in \
      *\\[\ \	]*) \
        bs=\\; \
        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
    esac; \
  fi; \
  skip_next=no; \
  strip_trailopt () \
  { \
    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  }; \
  for flg in $$sane_makeflags; do \
    test $$skip_next = yes && { skip_next=no; continue; }; \
    case $$flg in \
      *=*|--*) continue;; \
        -*I) strip_trailopt 'I'; skip_next=yes;; \
      -*I?*) strip_trailopt 'I';; \
        -*O) strip_trailopt 'O'; skip_next=yes;; \
      -*O?*) strip_trailopt 'O';; \
        -*l) strip_trailopt 'l'; skip_next=yes;; \
      -*l?*) strip_trailopt 'l';; \
      -[dEDm]) skip_next=yes;; \
      -[JT]) skip_next=yes;; \
    esac; \
    case $$flg in \
      *$$target_option*) has_opt=yes; break;; \
    esac; \
  done; \
  test $$has_opt = yes
am__make_dryrun = (target_option=n; $(am__make_running_with_option))
am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
subdir = tests/rdfxml
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/build/gtk-doc.m4 \
	$(top_srcdir)/build/libtool.m4 \
	$(top_srcdir)/build/ltoptions.m4 \
	$(top_srcdir)/build/ltsugar.m4 \
	$(top_srcdir)/build/ltversion.m4 \
	$(top_srcdir)/build/lt~obsolete.m4 $(top_srcdir)/build/pkg.m4 \
	$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/src/raptor_config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
AM_V_P = $(am__v_P_@AM_V@)
am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
am__v_P_0 = false
am__v_P_1 = :
AM_V_GEN = $(am__v_GEN_@AM_V@)
am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
am__v_GEN_0 = @echo "  GEN     " $@;
am__v_GEN_1 = 
AM_V_at = $(am__v_at_@AM_V@)
am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
am__v_at_0 = @
am__v_at_1 = 
SOURCES =
DIST_SOURCES =
am__can_run_installinfo = \
  case $$AM_UPDATE_INFO_DIR in \
    n|no|NO) false;; \
    *) (install-info --version) >/dev/null 2>&1;; \
  esac
am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
am__DIST_COMMON = $(srcdir)/Makefile.in
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
BISON = @BISON@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPPFLAGS = @CPPFLAGS@
CSCOPE = @CSCOPE@
CTAGS = @CTAGS@
CURL_CONFIG = @CURL_CONFIG@
CYGPATH_W = @CYGPATH_W@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
ETAGS = @ETAGS@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
FILECMD = @FILECMD@
GREP = @GREP@
GTKDOC_CHECK = @GTKDOC_CHECK@
GTKDOC_CHECK_PATH = @GTKDOC_CHECK_PATH@
GTKDOC_DEPS_CFLAGS = @GTKDOC_DEPS_CFLAGS@
GTKDOC_DEPS_LIBS = @GTKDOC_DEPS_LIBS@
GTKDOC_MKPDF = @GTKDOC_MKPDF@
GTKDOC_REBASE = @GTKDOC_REBASE@
HTML_DIR = @HTML_DIR@
ICU_CFLAGS = @ICU_CFLAGS@
ICU_LIBS = @ICU_LIBS@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
JING = @JING@
LD = @LD@
LDFLAGS = @LDFLAGS@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBCURL_CFLAGS = @LIBCURL_CFLAGS@
LIBCURL_LIBS = @LIBCURL_LIBS@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIBXML_CFLAGS = @LIBXML_CFLAGS@
LIBXML_LIBS = @LIBXML_LIBS@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MEM = @MEM@
MEM_LIBS = @MEM_LIBS@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PERL = @PERL@
PKG_CONFIG = @PKG_CONFIG@
PKG_CONFIG_LIBDIR = @PKG_CONFIG_LIBDIR@
PKG_CONFIG_PATH = @PKG_CONFIG_PATH@
PKG_CONFIG_REQUIRES = @PKG_CONFIG_REQUIRES@
RANLIB = @RANLIB@
RAPTOR_LDFLAGS = @RAPTOR_LDFLAGS@
RAPTOR_LIBTOOLLIBS = @RAPTOR_LIBTOOLLIBS@
RAPTOR_LIBTOOL_VERSION = @RAPTOR_LIBTOOL_VERSION@
RAPTOR_PARSERS = @RAPTOR_PARSERS@
RAPTOR_SERIALIZERS = @RAPTOR_SERIALIZERS@
RAPTOR_VERSION = @RAPTOR_VERSION@
RAPTOR_VERSION_DECIMAL = @RAPTOR_VERSION_DECIMAL@
RAPTOR_VERSION_MAJOR = @RAPTOR_VERSION_MAJOR@
RAPTOR_VERSION_MINOR = @RAPTOR_VERSION_MINOR@
RAPTOR_VERSION_RELEASE = @RAPTOR_VERSION_RELEASE@
RAPTOR_WWW_LIBRARY = @RAPTOR_WWW_LIBRARY@
RAPTOR_XML_PARSER = @RAPTOR_XML_PARSER@
RECHO = @RECHO@
RECHO_C = @RECHO_C@
RECHO_N = @RECHO_N@
RPM_RELEASE = @RPM_RELEASE@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
TAR = @TAR@
VERSION = @VERSION@
XML_CONFIG = @XML_CONFIG@
XSLT_CFLAGS = @XSLT_CFLAGS@
XSLT_CONFIG = @XSLT_CONFIG@
XSLT_LIBS = @XSLT_LIBS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
runstatedir = @runstatedir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@

# These are errors in strict mode, warnings in lax - for now
RDF_BAGID_TEST_FILES = ex-03.rdf ex-42.rdf ex-43.rdf ex-44.rdf ex-45.rdf
RDF_TEST_FILES = ex-00.rdf ex-01.rdf ex-02.rdf ex-04.rdf ex-05.rdf \
ex-06.rdf ex-07.rdf ex-08.rdf ex-09.rdf ex-10.rdf ex-11.rdf ex-12.rdf \
ex-13.rdf ex-14.rdf ex-15.rdf ex-16.rdf ex-17.rdf ex-18.rdf \
ex-20.rdf ex-21.rdf ex-22.rdf ex-23.rdf ex-24.rdf ex-25.rdf ex-26.rdf \
ex-27.rdf ex-28.rdf ex-29.rdf ex-30.rdf ex-31.rdf ex-32.rdf ex-33.rdf \
ex-34.rdf ex-35.rdf ex-36.rdf ex-37.rdf ex-38.rdf ex-39.rdf ex-40.rdf \
ex-41.rdf ex-46.rdf ex-47.rdf ex-48.rdf ex-49.rdf ex-51.rdf \
ex-53.rdf ex-54.rdf ex-56.rdf ex-57.rdf ex-58.rdf ex-61.rdf \
ex-62.rdf ex-63.rdf \
bug-650.rdf \
22-rdf-syntax-ns.rdf rdfs-namespace.rdf rdf-schema.rdf \
owl-schema.rdf daml-oil.rdf wine.rdf


# ex-55 fails with libxml2
#   libxml2 bug report: http://bugs.gnome.org/show_bug.cgi?id=159219
RDF_MAYFAIL_XML_TEST_FILES = ex-55.rdf
RDF_BAD_TEST_FILES = bad-00.rdf bad-01.rdf bad-02.rdf bad-03.rdf \
bad-04.rdf bad-05.rdf bad-06.rdf bad-07.rdf bad-08.rdf bad-09.rdf \
bad-10.rdf bad-11.rdf bad-12.rdf bad-13.rdf bad-14.rdf bad-18.rdf \
bad-19.rdf bad-20.rdf bad-21.rdf bad-22.rdf bad-23.rdf

RDF_BAD_NFC_TEST_FILES = bad-15.rdf bad-16.rdf bad-17.rdf
RDF_WARN_TEST_FILES = warn-00.rdf warn-02.rdf warn-04.rdf \
warn-05.rdf warn-06.rdf warn-07.rdf \
$(RDF_BAGID_TEST_FILES)

RDF_ASSUME_TEST_FILES = ex-19.rdf
RDF_SCAN_TEST_FILES = ex-52.svg
RDF_OUT_FILES = ex-00.out ex-01.out ex-02.out ex-03.out ex-04.out ex-05.out \
ex-06.out ex-07.out ex-08.out ex-09.out ex-10.out ex-11.out ex-12.out \
ex-13.out ex-14.out ex-15.out ex-16.out ex-17.out ex-18.out \
ex-20.out ex-21.out ex-22.out ex-23.out ex-24.out ex-25.out ex-26.out \
ex-27.out ex-28.out ex-29.out ex-30.out ex-31.out ex-32.out ex-33.out \
ex-34.out ex-35.out ex-36.out ex-37.out ex-38.out ex-39.out ex-40.out \
ex-41.out ex-42.out ex-43.out ex-44.out ex-45.out ex-46.out ex-47.out \
ex-48.out ex-49.out ex-51.out ex-53.out ex-54.out ex-55.out ex-56.out \
ex-57.out ex-58.out ex-61.out ex-61.out ex-62.out ex-63.out \
bug-650.out \
22-rdf-syntax-ns.out rdfs-namespace.out rdf-schema.out \
owl-schema.out daml-oil.out wine.out

RDF_HACK_OUT_FILES = ex-38-rdfxmla.out
RDF_MAYFAIL_XML_OUT_FILES = ex-55.rdf
RDF_WARN_OUT_FILES = warn-00.out warn-02.out warn-04.out \
warn-05.out warn-06.out warn-07.out

RDF_ASSUME_OUT_FILES = ex-19.out
RDF_SCAN_OUT_FILES = ex-52.out
RDF_SERIALIZE_TEST_FILES = ex-59.nt ex-60.nt
RDF_SERIALIZE_OUT_FILES = ex-59.rdf ex-60.rdf

# Used to make N-triples output consistent
BASE_URI = http://librdf.org/raptor/tests/
# for 22-rdf-syntax-ns.rdf
RDF_NS_URI = http://www.w3.org/1999/02/22-rdf-syntax-ns
# for rdfs-namespace.rdf (2002-04-30) and rdf-schema.rdf (2000-03-27)
RDFS_NS_URI = http://www.w3.org/2000/01/rdf-schema
OWL_DOC_URI = "http://www.w3.org/2002/07/owl"
DAML_OIL_DOC_URI = "http://www.daml.org/2001/03/daml+oil"
OWL_WINE_URI = "http://www.w3.org/TR/owl-guide/wine.rdf"
EXTRA_DIST = \
	CMakeLists.txt \
	$(RDF_TEST_FILES) \
	$(RDF_MAYFAIL_XML_TEST_FILES) \
	$(RDF_ASSUME_TEST_FILES) \
	$(RDF_SCAN_TEST_FILES) \
	$(RDF_BAD_TEST_FILES) \
	$(RDF_BAD_NFC_TEST_FILES) \
	$(RDF_WARN_TEST_FILES) \
	$(RDF_OUT_FILES) \
	$(RDF_MAYFAIL_XML_OUT_FILES) \
	$(RDF_ASSUME_OUT_FILES) \
	$(RDF_SCAN_OUT_FILES) \
	$(RDF_WARN_OUT_FILES) \
	$(RDF_SERIALIZE_TEST_FILES) \
	$(RDF_SERIALIZE_OUT_FILES) \
	$(RDF_HACK_OUT_FILES)

RAPPER = $(top_builddir)/utils/rapper
RDFDIFF = $(top_builddir)/utils/rdfdiff
CLEANFILES = CMakeTests.txt CMakeTmp.txt
@MAINTAINER_MODE_TRUE@check_rdf_deps = $(RDF_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_assume_rdf_deps = $(RDF_ASSUME_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_scan_rdf_deps = $(RDF_SCAN_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_mayfail_xml_rdf_deps = $(RDF_MAYFAIL_XML_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_bad_rdf_deps = $(RDF_BAD_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_bad_nfc_rdf_deps = $(RDF_BAD_NFC_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_warn_rdf_deps = $(RDF_WARN_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_rdfdiff_deps = $(RDF_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_rdfxml_deps = $(RDF_SERIALIZE_TEST_FILES)
@MAINTAINER_MODE_TRUE@check_rdfxmla_deps = $(RDF_TEST_FILES)
all: all-am

.SUFFIXES:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
	        && { if test -f $@; then exit 0; else break; fi; }; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu tests/rdfxml/Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --gnu tests/rdfxml/Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs
tags TAGS:

ctags CTAGS:

cscope cscopelist:

distdir: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) distdir-am

distdir-am: $(DISTFILES)
	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
	list='$(DISTFILES)'; \
	  dist_files=`for file in $$list; do echo $$file; done | \
	  sed -e "s|^$$srcdirstrip/||;t" \
	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
	case $$dist_files in \
	  */*) $(MKDIR_P) `echo "$$dist_files" | \
			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
			   sort -u` ;; \
	esac; \
	for file in $$dist_files; do \
	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
	  if test -d $$d/$$file; then \
	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
	    if test -d "$(distdir)/$$file"; then \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
	    fi; \
	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
	  else \
	    test -f "$(distdir)/$$file" \
	    || cp -p $$d/$$file "$(distdir)/$$file" \
	    || exit 1; \
	  fi; \
	done
check-am: all-am
	$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-am
all-am: Makefile
installdirs:
install: install-am
install-exec: install-exec-am
install-data: install-data-am
uninstall: uninstall-am

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-am
install-strip:
	if test -z '$(STRIP)'; then \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	      install; \
	else \
	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
	fi
mostlyclean-generic:

clean-generic:
	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
clean: clean-am

clean-am: clean-generic clean-libtool mostlyclean-am

distclean: distclean-am
	-rm -f Makefile
distclean-am: clean-am distclean-generic

dvi: dvi-am

dvi-am:

html: html-am

html-am:

info: info-am

info-am:

install-data-am:

install-dvi: install-dvi-am

install-dvi-am:

install-exec-am:

install-html: install-html-am

install-html-am:

install-info: install-info-am

install-info-am:

install-man:

install-pdf: install-pdf-am

install-pdf-am:

install-ps: install-ps-am

install-ps-am:

installcheck-am:

maintainer-clean: maintainer-clean-am
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic

mostlyclean: mostlyclean-am

mostlyclean-am: mostlyclean-generic mostlyclean-libtool

pdf: pdf-am

pdf-am:

ps: ps-am

ps-am:

uninstall-am:

.MAKE: check-am install-am install-strip

.PHONY: all all-am check check-am check-local clean clean-generic \
	clean-libtool cscopelist-am ctags-am distclean \
	distclean-generic distclean-libtool distdir dvi dvi-am html \
	html-am info info-am install install-am install-data \
	install-data-am install-dvi install-dvi-am install-exec \
	install-exec-am install-html install-html-am install-info \
	install-info-am install-man install-pdf install-pdf-am \
	install-ps install-ps-am install-strip installcheck \
	installcheck-am installdirs maintainer-clean \
	maintainer-clean-generic mostlyclean mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
	uninstall-am

.PRECIOUS: Makefile


build-rapper:
	@(cd $(top_builddir)/utils ; $(MAKE) rapper$(EXEEXT))

build-rdfdiff:
	@(cd $(top_builddir)/utils ; $(MAKE) rdfdiff$(EXEEXT))

check-local: build-rapper \
check-rdf check-mayfail-xml-rdf check-assume-rdf check-scan-rdf \
check-bad-rdf check-bad-nfc-rdf check-warn-rdf \
check-rdfdiff check-rdfxml check-rdfxmla

check-rdf: build-rapper $(check_rdf_deps)
	@set +e; result=0; \
	$(RECHO) "Testing legal rdf/xml"; \
	for test in $(RDF_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  if test $$name = 22-rdf-syntax-ns; then \
	    baseuri=$(RDF_NS_URI); \
	  elif test $$name = rdfs-namespace -o $$name = rdf-schema; then \
	    baseuri=$(RDFS_NS_URI); \
	  elif test $$name = owl-schema; then \
	    baseuri=$(OWL_DOC_URI); \
	  elif test $$name = daml-oil; then \
	    baseuri=$(DAML_OIL_DOC_URI); \
	  elif test $$name = wine; then \
	    baseuri=$(OWL_WINE_URI); \
	  else \
	    baseuri=$(BASE_URI)$$name.rdf; \
	  fi; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -o ntriples $(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \
	  status=$$?; \
	  if test $$status != 0 -a $$status != 2 ; then \
	    $(RECHO) FAILED returned status $$status; result=1; \
	  elif cmp $(srcdir)/$$name.out $$name.res >/dev/null 2>&1; then \
	    if test $$status = 2 ; then \
	      $(RECHO) "ok with warnings"; grep Warning $$name.err; \
	    else \
	      $(RECHO) "ok"; \
	    fi; \
	  else \
	    $(RECHO) "FAILED"; \
	    diff $(srcdir)/$$name.out $$name.res; result=1; \
	  fi; \
	  rm -f $$name.res $$name.err; \
	  printf 'RAPPER_TEST(%s\n\t"%s"\n\t%s\n\t%s\n)\n\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -o ntriples \$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" \
		$$name.res \
		"\$${CMAKE_CURRENT_SOURCE_DIR}/$$name.out" >>CMakeTests.txt; \
	done; \
	set -e; exit $$result

check-assume-rdf: build-rapper $(check_assume_rdf_deps)
	@set +e; result=0; \
	$(RECHO) "Testing rdf/xml known by context"; \
	for test in $(RDF_ASSUME_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  baseuri=$(BASE_URI)$$name.rdf; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2>/dev/null; \
	  if cmp $(srcdir)/$$name.out $$name.res >/dev/null 2>&1; then \
	    $(RECHO) "ok"; \
	  else \
	    $(RECHO) "FAILED"; \
	    diff $(srcdir)/$$name.out $$name.res; result=1; \
	  fi; \
	  rm -f $$name.res ; \
	  printf 'RAPPER_TEST(%s\n\t"%s"\n\t%s\n\t%s\n)\n\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -o ntriples file:\$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" \
		$$name.res \
		"\$${CMAKE_CURRENT_SOURCE_DIR}/$$name.out" >>CMakeTests.txt; \
	done; \
	set -e; exit $$result

check-scan-rdf: build-rapper $(check_scan_rdf_deps)
	@set +e; result=0; \
	$(RECHO) "Testing rdf/xml inside other XML"; \
	for test in $(RDF_SCAN_TEST_FILES); do \
	  name=`echo $$test | sed -e 's/\..*//'` ; \
	  baseuri=$(BASE_URI)$$name.rdf; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -f scanForRDF -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2>/dev/null; \
	  if cmp $(srcdir)/$$name.out $$name.res >/dev/null 2>&1; then \
	    $(RECHO) "ok"; \
	  else \
	    $(RECHO) "FAILED"; \
	    diff $(srcdir)/$$name.out $$name.res; result=1; \
	  fi; \
	  rm -f $$name.res ; \
	  printf 'RAPPER_TEST(%s\n\t"%s"\n\t%s\n\t%s\n)\n\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -f scanForRDF -o ntriples file:\$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" \
		$$name.res \
		"\$${CMAKE_CURRENT_SOURCE_DIR}/$$name.out" >>CMakeTests.txt; \
	done; \
	set -e; exit $$result

check-mayfail-xml-rdf: build-rapper $(check_mayfail_xml_rdf_deps)
	@set +e; \
	$(RECHO) "Testing rdf/xml (may fail due to XML parser bugs)"; \
	for test in $(RDF_MAYFAIL_XML_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  baseuri=$(BASE_URI)$$name.rdf; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -o ntriples $(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \
	  status=$$?; \
	  if test $$status != 0 -a $$status != 2 ; then \
	    $(RECHO) FAILED returned status $$status; \
	  elif cmp $(srcdir)/$$name.out $$name.res >/dev/null 2>&1; then \
	    if test $$status = 2 ; then \
	      $(RECHO) "ok with warnings"; grep Warning $$name.err; \
	    else \
	      $(RECHO) "ok"; \
	    fi; \
	  else \
	    $(RECHO) "FAILED"; \
	    diff $(srcdir)/$$name.out $$name.res; \
	  fi; \
	  rm -f $$name.res $$name.err; \
	  printf 'RAPPER_TEST(%s\n\t"%s"\n\t%s\n\t%s\n)\n\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -o ntriples \$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" \
		$$name.res \
		"\$${CMAKE_CURRENT_SOURCE_DIR}/$$name.out" >>CMakeTests.txt; \
	done; \
	set -e; exit 0

check-bad-rdf: build-rapper $(check_bad_rdf_deps)
	@set +e; result=0; \
	$(RECHO) "Testing that bad rdf/xml fails"; \
	for test in $(RDF_BAD_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  baseuri=$(BASE_URI)$$name.rdf; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \
	  status=$$?; \
	  if test $$status -eq 1 ; then \
	    $(RECHO) "ok"; \
	  elif test $$status -eq 2 ; then \
	    $(RECHO) "FAILED - parsing succeeded with a warning"; \
	    cat $$name.res; grep Warning $$name.err; result=1; \
	  elif test $$status -eq 0 ; then \
	    $(RECHO) "FAILED - parsing succeeded but should have failed"; \
	    cat $$name.res; result=1; \
	  else \
	    $(RECHO) "FAILED - parsing failed with unknown status $$status"; \
	    cat $$name.res; result=1; \
	  fi; \
	  rm -f $$name.res $$name.err ; \
	  printf 'ADD_TEST(%s %s) # WILL_FAIL\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -o ntriples file:\$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" >>CMakeTests.txt; \
	  printf '\t%s\n' rdfxml.$$name >>CMakeTmp.txt; \
	done; \
	(printf '\nSET_TESTS_PROPERTIES(\n'; \
	 cat CMakeTmp.txt; \
	 printf '\tPROPERTIES\n\tWILL_FAIL TRUE\n)\n\n') >>CMakeTests.txt; \
	rm -f CMakeTmp.txt; \
	set -e; exit $$result

check-bad-nfc-rdf: build-rapper $(check_bad_nfc_rdf_deps)
	@set +e; result=0; \
	$(RECHO) "Testing that rdf/xml with bad Unicode NFC fails"; \
	for test in $(RDF_BAD_NFC_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  baseuri=$(BASE_URI)$$name.rdf; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -m strict -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \
	  status=$$?; \
	  if test $$status -eq 1 ; then \
	    $(RECHO) "ok"; \
	  elif test $$status -eq 2 ; then \
	    $(RECHO) "FAILED - parsing succeeded with a warning"; \
	    cat $$name.res; grep Warning $$name.err; result=1; \
	  elif test $$status -eq 0 ; then \
	    $(RECHO) "FAILED - parsing succeeded but should have failed (NFC test)"; \
	    cat $$name.res; result=0; \
	  else \
	    $(RECHO) "FAILED - parsing failed with unknown status $$status"; \
	    cat $$name.res; result=1; \
	  fi; \
	  rm -f $$name.res $$name.err ; \
	  printf 'ADD_TEST(%s %s) # WILL_FAIL\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -m strict -o ntriples file:\$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" >>CMakeTests.txt; \
	  printf '\t%s\n' rdfxml.$$name >>CMakeTmp.txt; \
	done; \
	(printf '\nSET_TESTS_PROPERTIES(\n'; \
	 cat CMakeTmp.txt; \
	 printf '\tPROPERTIES\n\tWILL_FAIL TRUE\n)\n\n') >>CMakeTests.txt; \
	rm -f CMakeTmp.txt; \
	set -e; exit $$result

check-warn-rdf: build-rapper $(check_warn_rdf_deps)
	@set +e; result=0; \
	$(RECHO) "Testing rdf/xml with warnings"; \
	for test in $(RDF_WARN_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  baseuri=$(BASE_URI)$$name.rdf; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -o ntriples file:$(srcdir)/$$test $$baseuri > $$name.res 2> $$name.err; \
	  status=$$?; \
	  if test $$status -eq 1 ; then \
	    $(RECHO) "FAILED - parsing failed when should have warned"; \
	    cat $$name.res; grep Error $$name.err; result=1; \
	  elif test $$status -eq 2 ; then \
	    if cmp $(srcdir)/$$name.out $$name.res >/dev/null 2>&1; then \
	      $(RECHO) "ok"; \
	    else \
	      $(RECHO) "FAILED"; \
	      diff $(srcdir)/$$name.out $$name.res; result=1; \
	    fi; \
	  else \
	    $(RECHO) "FAILED - parsing failed with unknown status $$status"; \
	    cat $$name.res; result=1; \
	  fi; \
	  rm -f $$name.res $$name.err ; \
	  printf 'RAPPER_TEST(%s\n\t"%s"\n\t%s\n\t%s\n)\n\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -o ntriples file:\$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" \
		$$name.res \
		"\$${CMAKE_CURRENT_SOURCE_DIR}/$$name.out" >>CMakeTests.txt; \
	done; \
	set -e; exit $$result

check-rdfdiff: build-rdfdiff $(check_rdfdiff_deps)
	@set +e; result=0; \
	$(RECHO) "Testing rdfdiff with legal rdf/xml"; \
	for test in $(RDF_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RDFDIFF) $(srcdir)/$$test $(srcdir)/$$test > $$name.res 2> $$name.err; \
	  status=$$?; \
	  if test $$status = 0; then \
	    $(RECHO) "ok"; \
	  else \
	    $(RECHO) "FAILED"; \
	    cat $$name.err; result=1; \
	  fi; \
	  rm -f $$name.res $$name.err; \
	done; \
	set -e; exit $$result

check-rdfxml: build-rapper $(check_rdfxml_deps)
	@set +e; result=0; \
	$(RECHO) "Testing rdfxml serialization with legal rdf/xml"; \
	for test in $(RDF_SERIALIZE_TEST_FILES); do \
	  name=`basename $$test .nt` ; \
	  baseuri=-; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -i ntriples -o rdfxml $(srcdir)/$$test $$baseuri > $$name-rdfxml.rdf 2> $$name.err; \
	  if cmp $(srcdir)/$$name.rdf $$name-rdfxml.rdf >/dev/null 2>&1; then \
	    $(RECHO) "ok"; \
	  else \
	    $(RECHO) "FAILED"; \
	    diff $(srcdir)/$$name.rdf $$name-rdfxml.rdf; result=1; \
	  fi; \
	  rm -f $$name-rdfxml.rdf $$name.res $$name.err; \
	  printf 'RAPPER_TEST(%s\n\t"%s"\n\t%s\n\t%s\n)\n\n' \
		rdfxml.$$name \
		"\$${RAPPER} -q -i ntriples -o rdfxml \$${CMAKE_CURRENT_SOURCE_DIR}/$$test $$baseuri" \
		$$name-rdfxml.rdf \
		"\$${CMAKE_CURRENT_SOURCE_DIR}/$$name.rdf" >>CMakeTests.txt; \
	done; \
	set -e; exit $$result

check-rdfxmla: build-rdfdiff build-rapper $(check_rdfxmla_deps)
	@set +e; result=0; \
	$(RECHO) "Testing rdfxml-abbrev serialization with legal rdf/xml"; \
	for test in $(RDF_TEST_FILES); do \
	  name=`basename $$test .rdf` ; \
	  baseuri=-; \
	  $(RECHO) $(RECHO_N) "Checking $$test $(RECHO_C)"; \
	  $(RAPPER) -q -o rdfxml-abbrev $(srcdir)/$$test $$baseuri > $$name-rdfxmla.rdf 2> $$name.err; \
	  status1=$$?; \
	  if test $$test = ex-38.rdf; then \
	    diff $(srcdir)/ex-38-rdfxmla.out $$name-rdfxmla.rdf > $$name.res 2> $$name.err; \
	    status2=$$?; \
	  else \
	    $(RDFDIFF) $(srcdir)/$$test $$name-rdfxmla.rdf > $$name.res 2> $$name.err; \
	    status2=$$?; \
	  fi; \
	  if test $$status1 = 0 -a $$status2 = 0; then \
	    $(RECHO) "ok"; \
	  elif test $$status1 = 2 -a $$status2 = 0; then \
	    $(RECHO) "ok with warnings"; grep Warning $$name.err; \
	  else \
	    $(RECHO) "FAILED"; \
	    echo $(RAPPER) -q -o rdfxml-abbrev $(srcdir)/$$test $$baseuri '>' $$name-rdfxmla.rdf; \
	  status1=$$?; \
	    echo $(RDFDIFF) $(srcdir)/$$test $$name-rdfxmla.rdf '>' $$name.res; \
	    echo "rapper + rdfdiff output:"; cat $$name.err; result=1; \
	  fi; \
	  rm -f $$name-rdfxmla.rdf $$name.res $$name.err; \
	done; \
	set -e; exit $$result

print-rdf-test-files:
	@echo $(RDF_TEST_FILES) | tr ' ' '\012'

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: