diff options
Diffstat (limited to '')
| -rw-r--r-- | deps/linenoise/.gitignore | 3 | ||||
| -rw-r--r-- | deps/linenoise/Makefile | 21 | ||||
| -rw-r--r-- | deps/linenoise/README.markdown | 247 | ||||
| -rw-r--r-- | deps/linenoise/example.c | 79 | ||||
| -rw-r--r-- | deps/linenoise/linenoise.c | 1230 | ||||
| -rw-r--r-- | deps/linenoise/linenoise.h | 75 |
6 files changed, 1655 insertions, 0 deletions
diff --git a/deps/linenoise/.gitignore b/deps/linenoise/.gitignore new file mode 100644 index 0000000..7ab7825 --- /dev/null +++ b/deps/linenoise/.gitignore @@ -0,0 +1,3 @@ +linenoise_example +*.dSYM +history.txt diff --git a/deps/linenoise/Makefile b/deps/linenoise/Makefile new file mode 100644 index 0000000..1dd894b --- /dev/null +++ b/deps/linenoise/Makefile @@ -0,0 +1,21 @@ +STD= +WARN= -Wall +OPT= -Os + +R_CFLAGS= $(STD) $(WARN) $(OPT) $(DEBUG) $(CFLAGS) +R_LDFLAGS= $(LDFLAGS) +DEBUG= -g + +R_CC=$(CC) $(R_CFLAGS) +R_LD=$(CC) $(R_LDFLAGS) + +linenoise.o: linenoise.h linenoise.c + +linenoise_example: linenoise.o example.o + $(R_LD) -o $@ $^ + +.c.o: + $(R_CC) -c $< + +clean: + rm -f linenoise_example *.o diff --git a/deps/linenoise/README.markdown b/deps/linenoise/README.markdown new file mode 100644 index 0000000..1afea2a --- /dev/null +++ b/deps/linenoise/README.markdown @@ -0,0 +1,247 @@ +# Linenoise + +A minimal, zero-config, BSD licensed, readline replacement used in Redis, +MongoDB, and Android. + +* Single and multi line editing mode with the usual key bindings implemented. +* History handling. +* Completion. +* Hints (suggestions at the right of the prompt as you type). +* About 1,100 lines of BSD license source code. +* Only uses a subset of VT100 escapes (ANSI.SYS compatible). + +## Can a line editing library be 20k lines of code? + +Line editing with some support for history is a really important feature for command line utilities. Instead of retyping almost the same stuff again and again it's just much better to hit the up arrow and edit on syntax errors, or in order to try a slightly different command. But apparently code dealing with terminals is some sort of Black Magic: readline is 30k lines of code, libedit 20k. Is it reasonable to link small utilities to huge libraries just to get a minimal support for line editing? + +So what usually happens is either: + + * Large programs with configure scripts disabling line editing if readline is not present in the system, or not supporting it at all since readline is GPL licensed and libedit (the BSD clone) is not as known and available as readline is (Real world example of this problem: Tclsh). + * Smaller programs not using a configure script not supporting line editing at all (A problem we had with Redis-cli for instance). + +The result is a pollution of binaries without line editing support. + +So I spent more or less two hours doing a reality check resulting in this little library: is it *really* needed for a line editing library to be 20k lines of code? Apparently not, it is possibe to get a very small, zero configuration, trivial to embed library, that solves the problem. Smaller programs will just include this, supporting line editing out of the box. Larger programs may use this little library or just checking with configure if readline/libedit is available and resorting to Linenoise if not. + +## Terminals, in 2010. + +Apparently almost every terminal you can happen to use today has some kind of support for basic VT100 escape sequences. So I tried to write a lib using just very basic VT100 features. The resulting library appears to work everywhere I tried to use it, and now can work even on ANSI.SYS compatible terminals, since no +VT220 specific sequences are used anymore. + +The library is currently about 1100 lines of code. In order to use it in your project just look at the *example.c* file in the source distribution, it is trivial. Linenoise is BSD code, so you can use both in free software and commercial software. + +## Tested with... + + * Linux text only console ($TERM = linux) + * Linux KDE terminal application ($TERM = xterm) + * Linux xterm ($TERM = xterm) + * Linux Buildroot ($TERM = vt100) + * Mac OS X iTerm ($TERM = xterm) + * Mac OS X default Terminal.app ($TERM = xterm) + * OpenBSD 4.5 through an OSX Terminal.app ($TERM = screen) + * IBM AIX 6.1 + * FreeBSD xterm ($TERM = xterm) + * ANSI.SYS + * Emacs comint mode ($TERM = dumb) + +Please test it everywhere you can and report back! + +## Let's push this forward! + +Patches should be provided in the respect of Linenoise sensibility for small +easy to understand code. + +Send feedbacks to antirez at gmail + +# The API + +Linenoise is very easy to use, and reading the example shipped with the +library should get you up to speed ASAP. Here is a list of API calls +and how to use them. + + char *linenoise(const char *prompt); + +This is the main Linenoise call: it shows the user a prompt with line editing +and history capabilities. The prompt you specify is used as a prompt, that is, +it will be printed to the left of the cursor. The library returns a buffer +with the line composed by the user, or NULL on end of file or when there +is an out of memory condition. + +When a tty is detected (the user is actually typing into a terminal session) +the maximum editable line length is `LINENOISE_MAX_LINE`. When instead the +standard input is not a tty, which happens every time you redirect a file +to a program, or use it in an Unix pipeline, there are no limits to the +length of the line that can be returned. + +The returned line should be freed with the `free()` standard system call. +However sometimes it could happen that your program uses a different dynamic +allocation library, so you may also used `linenoiseFree` to make sure the +line is freed with the same allocator it was created. + +The canonical loop used by a program using Linenoise will be something like +this: + + while((line = linenoise("hello> ")) != NULL) { + printf("You wrote: %s\n", line); + linenoiseFree(line); /* Or just free(line) if you use libc malloc. */ + } + +## Single line VS multi line editing + +By default, Linenoise uses single line editing, that is, a single row on the +screen will be used, and as the user types more, the text will scroll towards +left to make room. This works if your program is one where the user is +unlikely to write a lot of text, otherwise multi line editing, where multiple +screens rows are used, can be a lot more comfortable. + +In order to enable multi line editing use the following API call: + + linenoiseSetMultiLine(1); + +You can disable it using `0` as argument. + +## History + +Linenoise supporst history, so that the user does not have to retype +again and again the same things, but can use the down and up arrows in order +to search and re-edit already inserted lines of text. + +The followings are the history API calls: + + int linenoiseHistoryAdd(const char *line); + int linenoiseHistorySetMaxLen(int len); + int linenoiseHistorySave(const char *filename); + int linenoiseHistoryLoad(const char *filename); + +Use `linenoiseHistoryAdd` every time you want to add a new element +to the top of the history (it will be the first the user will see when +using the up arrow). + +Note that for history to work, you have to set a length for the history +(which is zero by default, so history will be disabled if you don't set +a proper one). This is accomplished using the `linenoiseHistorySetMaxLen` +function. + +Linenoise has direct support for persisting the history into an history +file. The functions `linenoiseHistorySave` and `linenoiseHistoryLoad` do +just that. Both functions return -1 on error and 0 on success. + +## Mask mode + +Sometimes it is useful to allow the user to type passwords or other +secrets that should not be displayed. For such situations linenoise supports +a "mask mode" that will just replace the characters the user is typing +with `*` characters, like in the following example: + + $ ./linenoise_example + hello> get mykey + echo: 'get mykey' + hello> /mask + hello> ********* + +You can enable and disable mask mode using the following two functions: + + void linenoiseMaskModeEnable(void); + void linenoiseMaskModeDisable(void); + +## Completion + +Linenoise supports completion, which is the ability to complete the user +input when she or he presses the `<TAB>` key. + +In order to use completion, you need to register a completion callback, which +is called every time the user presses `<TAB>`. Your callback will return a +list of items that are completions for the current string. + +The following is an example of registering a completion callback: + + linenoiseSetCompletionCallback(completion); + +The completion must be a function returning `void` and getting as input +a `const char` pointer, which is the line the user has typed so far, and +a `linenoiseCompletions` object pointer, which is used as argument of +`linenoiseAddCompletion` in order to add completions inside the callback. +An example will make it more clear: + + void completion(const char *buf, linenoiseCompletions *lc) { + if (buf[0] == 'h') { + linenoiseAddCompletion(lc,"hello"); + linenoiseAddCompletion(lc,"hello there"); + } + } + +Basically in your completion callback, you inspect the input, and return +a list of items that are good completions by using `linenoiseAddCompletion`. + +If you want to test the completion feature, compile the example program +with `make`, run it, type `h` and press `<TAB>`. + +## Hints + +Linenoise has a feature called *hints* which is very useful when you +use Linenoise in order to implement a REPL (Read Eval Print Loop) for +a program that accepts commands and arguments, but may also be useful in +other conditions. + +The feature shows, on the right of the cursor, as the user types, hints that +may be useful. The hints can be displayed using a different color compared +to the color the user is typing, and can also be bold. + +For example as the user starts to type `"git remote add"`, with hints it's +possible to show on the right of the prompt a string `<name> <url>`. + +The feature works similarly to the history feature, using a callback. +To register the callback we use: + + linenoiseSetHintsCallback(hints); + +The callback itself is implemented like this: + + char *hints(const char *buf, int *color, int *bold) { + if (!strcasecmp(buf,"git remote add")) { + *color = 35; + *bold = 0; + return " <name> <url>"; + } + return NULL; + } + +The callback function returns the string that should be displayed or NULL +if no hint is available for the text the user currently typed. The returned +string will be trimmed as needed depending on the number of columns available +on the screen. + +It is possible to return a string allocated in dynamic way, by also registering +a function to deallocate the hint string once used: + + void linenoiseSetFreeHintsCallback(linenoiseFreeHintsCallback *); + +The free hint callback will just receive the pointer and free the string +as needed (depending on how the hits callback allocated it). + +As you can see in the example above, a `color` (in xterm color terminal codes) +can be provided together with a `bold` attribute. If no color is set, the +current terminal foreground color is used. If no bold attribute is set, +non-bold text is printed. + +Color codes are: + + red = 31 + green = 32 + yellow = 33 + blue = 34 + magenta = 35 + cyan = 36 + white = 37; + +## Screen handling + +Sometimes you may want to clear the screen as a result of something the +user typed. You can do this by calling the following function: + + void linenoiseClearScreen(void); + +## Related projects + +* [Linenoise NG](https://github.com/arangodb/linenoise-ng) is a fork of Linenoise that aims to add more advanced features like UTF-8 support, Windows support and other features. Uses C++ instead of C as development language. +* [Linenoise-swift](https://github.com/andybest/linenoise-swift) is a reimplementation of Linenoise written in Swift. diff --git a/deps/linenoise/example.c b/deps/linenoise/example.c new file mode 100644 index 0000000..74358c3 --- /dev/null +++ b/deps/linenoise/example.c @@ -0,0 +1,79 @@ +#include <stdio.h> +#include <stdlib.h> +#include <string.h> +#include "linenoise.h" + + +void completion(const char *buf, linenoiseCompletions *lc) { + if (buf[0] == 'h') { + linenoiseAddCompletion(lc,"hello"); + linenoiseAddCompletion(lc,"hello there"); + } +} + +char *hints(const char *buf, int *color, int *bold) { + if (!strcasecmp(buf,"hello")) { + *color = 35; + *bold = 0; + return " World"; + } + return NULL; +} + +int main(int argc, char **argv) { + char *line; + char *prgname = argv[0]; + + /* Parse options, with --multiline we enable multi line editing. */ + while(argc > 1) { + argc--; + argv++; + if (!strcmp(*argv,"--multiline")) { + linenoiseSetMultiLine(1); + printf("Multi-line mode enabled.\n"); + } else if (!strcmp(*argv,"--keycodes")) { + linenoisePrintKeyCodes(); + exit(0); + } else { + fprintf(stderr, "Usage: %s [--multiline] [--keycodes]\n", prgname); + exit(1); + } + } + + /* Set the completion callback. This will be called every time the + * user uses the <tab> key. */ + linenoiseSetCompletionCallback(completion); + linenoiseSetHintsCallback(hints); + + /* Load history from file. The history file is just a plain text file + * where entries are separated by newlines. */ + linenoiseHistoryLoad("history.txt"); /* Load the history at startup */ + + /* Now this is the main loop of the typical linenoise-based application. + * The call to linenoise() will block as long as the user types something + * and presses enter. + * + * The typed string is returned as a malloc() allocated string by + * linenoise, so the user needs to free() it. */ + + while((line = linenoise("hello> ")) != NULL) { + /* Do something with the string. */ + if (line[0] != '\0' && line[0] != '/') { + printf("echo: '%s'\n", line); + linenoiseHistoryAdd(line); /* Add to the history. */ + linenoiseHistorySave("history.txt"); /* Save the history on disk. */ + } else if (!strncmp(line,"/historylen",11)) { + /* The "/historylen" command will change the history len. */ + int len = atoi(line+11); + linenoiseHistorySetMaxLen(len); + } else if (!strncmp(line, "/mask", 5)) { + linenoiseMaskModeEnable(); + } else if (!strncmp(line, "/unmask", 7)) { + linenoiseMaskModeDisable(); + } else if (line[0] == '/') { + printf("Unreconized command: %s\n", line); + } + free(line); + } + return 0; +} diff --git a/deps/linenoise/linenoise.c b/deps/linenoise/linenoise.c new file mode 100644 index 0000000..dd86abe --- /dev/null +++ b/deps/linenoise/linenoise.c @@ -0,0 +1,1230 @@ +/* linenoise.c -- guerrilla line editing library against the idea that a + * line editing lib needs to be 20,000 lines of C code. + * + * You can find the latest source code at: + * + * http://github.com/antirez/linenoise + * + * Does a number of crazy assumptions that happen to be true in 99.9999% of + * the 2010 UNIX computers around. + * + * ------------------------------------------------------------------------ + * + * Copyright (c) 2010-2016, Salvatore Sanfilippo <antirez at gmail dot com> + * Copyright (c) 2010-2013, Pieter Noordhuis <pcnoordhuis at gmail dot com> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * ------------------------------------------------------------------------ + * + * References: + * - http://invisible-island.net/xterm/ctlseqs/ctlseqs.html + * - http://www.3waylabs.com/nw/WWW/products/wizcon/vt220.html + * + * Todo list: + * - Filter bogus Ctrl+<char> combinations. + * - Win32 support + * + * Bloat: + * - History search like Ctrl+r in readline? + * + * List of escape sequences used by this program, we do everything just + * with three sequences. In order to be so cheap we may have some + * flickering effect with some slow terminal, but the lesser sequences + * the more compatible. + * + * EL (Erase Line) + * Sequence: ESC [ n K + * Effect: if n is 0 or missing, clear from cursor to end of line + * Effect: if n is 1, clear from beginning of line to cursor + * Effect: if n is 2, clear entire line + * + * CUF (CUrsor Forward) + * Sequence: ESC [ n C + * Effect: moves cursor forward n chars + * + * CUB (CUrsor Backward) + * Sequence: ESC [ n D + * Effect: moves cursor backward n chars + * + * The following is used to get the terminal width if getting + * the width with the TIOCGWINSZ ioctl fails + * + * DSR (Device Status Report) + * Sequence: ESC [ 6 n + * Effect: reports the current cusor position as ESC [ n ; m R + * where n is the row and m is the column + * + * When multi line mode is enabled, we also use an additional escape + * sequence. However multi line editing is disabled by default. + * + * CUU (Cursor Up) + * Sequence: ESC [ n A + * Effect: moves cursor up of n chars. + * + * CUD (Cursor Down) + * Sequence: ESC [ n B + * Effect: moves cursor down of n chars. + * + * When linenoiseClearScreen() is called, two additional escape sequences + * are used in order to clear the screen and position the cursor at home + * position. + * + * CUP (Cursor position) + * Sequence: ESC [ H + * Effect: moves the cursor to upper left corner + * + * ED (Erase display) + * Sequence: ESC [ 2 J + * Effect: clear the whole screen + * + */ + +#define _DEFAULT_SOURCE /* For fchmod() */ +#define _BSD_SOURCE /* For fchmod() */ +#include <termios.h> +#include <unistd.h> +#include <stdlib.h> +#include <stdio.h> +#include <errno.h> +#include <string.h> +#include <stdlib.h> +#include <ctype.h> +#include <sys/stat.h> +#include <sys/types.h> +#include <sys/ioctl.h> +#include <unistd.h> +#include "linenoise.h" + +#define LINENOISE_DEFAULT_HISTORY_MAX_LEN 100 +#define LINENOISE_MAX_LINE 4096 +static char *unsupported_term[] = {"dumb","cons25","emacs",NULL}; +static linenoiseCompletionCallback *completionCallback = NULL; +static linenoiseHintsCallback *hintsCallback = NULL; +static linenoiseFreeHintsCallback *freeHintsCallback = NULL; + +static struct termios orig_termios; /* In order to restore at exit.*/ +static int maskmode = 0; /* Show "***" instead of input. For passwords. */ +static int rawmode = 0; /* For atexit() function to check if restore is needed*/ +static int mlmode = 0; /* Multi line mode. Default is single line. */ +static int atexit_registered = 0; /* Register atexit just 1 time. */ +static int history_max_len = LINENOISE_DEFAULT_HISTORY_MAX_LEN; +static int history_len = 0; +static char **history = NULL; + +/* The linenoiseState structure represents the state during line editing. + * We pass this state to functions implementing specific editing + * functionalities. */ +struct linenoiseState { + int ifd; /* Terminal stdin file descriptor. */ + int ofd; /* Terminal stdout file descriptor. */ + char *buf; /* Edited line buffer. */ + size_t buflen; /* Edited line buffer size. */ + const char *prompt; /* Prompt to display. */ + size_t plen; /* Prompt length. */ + size_t pos; /* Current cursor position. */ + size_t oldpos; /* Previous refresh cursor position. */ + size_t len; /* Current edited line length. */ + size_t cols; /* Number of columns in terminal. */ + size_t maxrows; /* Maximum num of rows used so far (multiline mode) */ + int history_index; /* The history index we are currently editing. */ +}; + +enum KEY_ACTION{ + KEY_NULL = 0, /* NULL */ + CTRL_A = 1, /* Ctrl+a */ + CTRL_B = 2, /* Ctrl-b */ + CTRL_C = 3, /* Ctrl-c */ + CTRL_D = 4, /* Ctrl-d */ + CTRL_E = 5, /* Ctrl-e */ + CTRL_F = 6, /* Ctrl-f */ + CTRL_H = 8, /* Ctrl-h */ + TAB = 9, /* Tab */ + NL = 10, /* Enter typed before raw mode was enabled */ + CTRL_K = 11, /* Ctrl+k */ + CTRL_L = 12, /* Ctrl+l */ + ENTER = 13, /* Enter */ + CTRL_N = 14, /* Ctrl-n */ + CTRL_P = 16, /* Ctrl-p */ + CTRL_T = 20, /* Ctrl-t */ + CTRL_U = 21, /* Ctrl+u */ + CTRL_W = 23, /* Ctrl+w */ + ESC = 27, /* Escape */ + BACKSPACE = 127 /* Backspace */ +}; + +static void linenoiseAtExit(void); +int linenoiseHistoryAdd(const char *line); +static void refreshLine(struct linenoiseState *l); + +/* Debugging macro. */ +#if 0 +FILE *lndebug_fp = NULL; +#define lndebug(...) \ + do { \ + if (lndebug_fp == NULL) { \ + lndebug_fp = fopen("/tmp/lndebug.txt","a"); \ + fprintf(lndebug_fp, \ + "[%d %d %d] p: %d, rows: %d, rpos: %d, max: %d, oldmax: %d\n", \ + (int)l->len,(int)l->pos,(int)l->oldpos,plen,rows,rpos, \ + (int)l->maxrows,old_rows); \ + } \ + fprintf(lndebug_fp, ", " __VA_ARGS__); \ + fflush(lndebug_fp); \ + } while (0) +#else +#define lndebug(fmt, ...) +#endif + +/* ======================= Low level terminal handling ====================== */ + +/* Enable "mask mode". When it is enabled, instead of the input that + * the user is typing, the terminal will just display a corresponding + * number of asterisks, like "****". This is useful for passwords and other + * secrets that should not be displayed. */ +void linenoiseMaskModeEnable(void) { + maskmode = 1; +} + +/* Disable mask mode. */ +void linenoiseMaskModeDisable(void) { + maskmode = 0; +} + +/* Set if to use or not the multi line mode. */ +void linenoiseSetMultiLine(int ml) { + mlmode = ml; +} + +/* Return true if the terminal name is in the list of terminals we know are + * not able to understand basic escape sequences. */ +static int isUnsupportedTerm(void) { + char *term = getenv("TERM"); + int j; + + if (term == NULL) return 0; + for (j = 0; unsupported_term[j]; j++) + if (!strcasecmp(term,unsupported_term[j])) return 1; + return 0; +} + +/* Raw mode: 1960 magic shit. */ +static int enableRawMode(int fd) { + struct termios raw; + + if (!isatty(STDIN_FILENO)) goto fatal; + if (!atexit_registered) { + atexit(linenoiseAtExit); + atexit_registered = 1; + } + if (tcgetattr(fd,&orig_termios) == -1) goto fatal; + + raw = orig_termios; /* modify the original mode */ + /* input modes: no break, no CR to NL, no parity check, no strip char, + * no start/stop output control. */ + raw.c_iflag &= ~(BRKINT | ICRNL | INPCK | ISTRIP | IXON); + /* output modes - disable post processing */ + raw.c_oflag &= ~(OPOST); + /* control modes - set 8 bit chars */ + raw.c_cflag |= (CS8); + /* local modes - choing off, canonical off, no extended functions, + * no signal chars (^Z,^C) */ + raw.c_lflag &= ~(ECHO | ICANON | IEXTEN | ISIG); + /* control chars - set return condition: min number of bytes and timer. + * We want read to return every single byte, without timeout. */ + raw.c_cc[VMIN] = 1; raw.c_cc[VTIME] = 0; /* 1 byte, no timer */ + + /* put terminal in raw mode */ + if (tcsetattr(fd,TCSANOW,&raw) < 0) goto fatal; + rawmode = 1; + return 0; + +fatal: + errno = ENOTTY; + return -1; +} + +static void disableRawMode(int fd) { + /* Don't even check the return value as it's too late. */ + if (rawmode && tcsetattr(fd,TCSANOW,&orig_termios) != -1) + rawmode = 0; +} + +/* Use the ESC [6n escape sequence to query the horizontal cursor position + * and return it. On error -1 is returned, on success the position of the + * cursor. */ +static int getCursorPosition(int ifd, int ofd) { + char buf[32]; + int cols, rows; + unsigned int i = 0; + + /* Report cursor location */ + if (write(ofd, "\x1b[6n", 4) != 4) return -1; + + /* Read the response: ESC [ rows ; cols R */ + while (i < sizeof(buf)-1) { + if (read(ifd,buf+i,1) != 1) break; + if (buf[i] == 'R') break; + i++; + } + buf[i] = '\0'; + + /* Parse it. */ + if (buf[0] != ESC || buf[1] != '[') return -1; + if (sscanf(buf+2,"%d;%d",&rows,&cols) != 2) return -1; + return cols; +} + +/* Try to get the number of columns in the current terminal, or assume 80 + * if it fails. */ +static int getColumns(int ifd, int ofd) { + struct winsize ws; + + if (ioctl(1, TIOCGWINSZ, &ws) == -1 || ws.ws_col == 0) { + /* ioctl() failed. Try to query the terminal itself. */ + int start, cols; + + /* Get the initial position so we can restore it later. */ + start = getCursorPosition(ifd,ofd); + if (start == -1) goto failed; + + /* Go to right margin and get position. */ + if (write(ofd,"\x1b[999C",6) != 6) goto failed; + cols = getCursorPosition(ifd,ofd); + if (cols == -1) goto failed; + + /* Restore position. */ + if (cols > start) { + char seq[32]; + snprintf(seq,32,"\x1b[%dD",cols-start); + if (write(ofd,seq,strlen(seq)) == -1) { + /* Can't recover... */ + } + } + return cols; + } else { + return ws.ws_col; + } + +failed: + return 80; +} + +/* Clear the screen. Used to handle ctrl+l */ +void linenoiseClearScreen(void) { + if (write(STDOUT_FILENO,"\x1b[H\x1b[2J",7) <= 0) { + /* nothing to do, just to avoid warning. */ + } +} + +/* Beep, used for completion when there is nothing to complete or when all + * the choices were already shown. */ +static void linenoiseBeep(void) { + fprintf(stderr, "\x7"); + fflush(stderr); +} + +/* ============================== Completion ================================ */ + +/* Free a list of completion option populated by linenoiseAddCompletion(). */ +static void freeCompletions(linenoiseCompletions *lc) { + size_t i; + for (i = 0; i < lc->len; i++) + free(lc->cvec[i]); + if (lc->cvec != NULL) + free(lc->cvec); +} + +/* This is an helper function for linenoiseEdit() and is called when the + * user types the <tab> key in order to complete the string currently in the + * input. + * + * The state of the editing is encapsulated into the pointed linenoiseState + * structure as described in the structure definition. */ +static int completeLine(struct linenoiseState *ls) { + linenoiseCompletions lc = { 0, NULL }; + int nread, nwritten; + char c = 0; + + completionCallback(ls->buf,&lc); + if (lc.len == 0) { + linenoiseBeep(); + } else { + size_t stop = 0, i = 0; + + while(!stop) { + /* Show completion or original buffer */ + if (i < lc.len) { + struct linenoiseState saved = *ls; + + ls->len = ls->pos = strlen(lc.cvec[i]); + ls->buf = lc.cvec[i]; + refreshLine(ls); + ls->len = saved.len; + ls->pos = saved.pos; + ls->buf = saved.buf; + } else { + refreshLine(ls); + } + + nread = read(ls->ifd,&c,1); + if (nread <= 0) { + freeCompletions(&lc); + return -1; + } + + switch(c) { + case 9: /* tab */ + i = (i+1) % (lc.len+1); + if (i == lc.len) linenoiseBeep(); + break; + case 27: /* escape */ + /* Re-show original buffer */ + if (i < lc.len) refreshLine(ls); + stop = 1; + break; + default: + /* Update buffer and return */ + if (i < lc.len) { + nwritten = snprintf(ls->buf,ls->buflen,"%s",lc.cvec[i]); + ls->len = ls->pos = nwritten; + } + stop = 1; + break; + } + } + } + + freeCompletions(&lc); + return c; /* Return last read character */ +} + +/* Register a callback function to be called for tab-completion. */ +void linenoiseSetCompletionCallback(linenoiseCompletionCallback *fn) { + completionCallback = fn; +} + +/* Register a hits function to be called to show hits to the user at the + * right of the prompt. */ +void linenoiseSetHintsCallback(linenoiseHintsCallback *fn) { + hintsCallback = fn; +} + +/* Register a function to free the hints returned by the hints callback + * registered with linenoiseSetHintsCallback(). */ +void linenoiseSetFreeHintsCallback(linenoiseFreeHintsCallback *fn) { + freeHintsCallback = fn; +} + +/* This function is used by the callback function registered by the user + * in order to add completion options given the input string when the + * user typed <tab>. See the example.c source code for a very easy to + * understand example. */ +void linenoiseAddCompletion(linenoiseCompletions *lc, const char *str) { + size_t len = strlen(str); + char *copy, **cvec; + + copy = malloc(len+1); + if (copy == NULL) return; + memcpy(copy,str,len+1); + cvec = realloc(lc->cvec,sizeof(char*)*(lc->len+1)); + if (cvec == NULL) { + free(copy); + return; + } + lc->cvec = cvec; + lc->cvec[lc->len++] = copy; +} + +/* =========================== Line editing ================================= */ + +/* We define a very simple "append buffer" structure, that is an heap + * allocated string where we can append to. This is useful in order to + * write all the escape sequences in a buffer and flush them to the standard + * output in a single call, to avoid flickering effects. */ +struct abuf { + char *b; + int len; +}; + +static void abInit(struct abuf *ab) { + ab->b = NULL; + ab->len = 0; +} + +static void abAppend(struct abuf *ab, const char *s, int len) { + char *new = realloc(ab->b,ab->len+len); + + if (new == NULL) return; + memcpy(new+ab->len,s,len); + ab->b = new; + ab->len += len; +} + +static void abFree(struct abuf *ab) { + free(ab->b); +} + +/* Helper of refreshSingleLine() and refreshMultiLine() to show hints + * to the right of the prompt. */ +void refreshShowHints(struct abuf *ab, struct linenoiseState *l, int plen) { + char seq[64]; + if (hintsCallback && plen+l->len < l->cols) { + int color = -1, bold = 0; + char *hint = hintsCallback(l->buf,&color,&bold); + if (hint) { + int hintlen = strlen(hint); + int hintmaxlen = l->cols-(plen+l->len); + if (hintlen > hintmaxlen) hintlen = hintmaxlen; + if (bold == 1 && color == -1) color = 37; + if (color != -1 || bold != 0) + snprintf(seq,64,"\033[%d;%d;49m",bold,color); + else + seq[0] = '\0'; + abAppend(ab,seq,strlen(seq)); + abAppend(ab,hint,hintlen); + if (color != -1 || bold != 0) + abAppend(ab,"\033[0m",4); + /* Call the function to free the hint returned. */ + if (freeHintsCallback) freeHintsCallback(hint); + } + } +} + +/* Single line low level line refresh. + * + * Rewrite the currently edited line accordingly to the buffer content, + * cursor position, and number of columns of the terminal. */ +static void refreshSingleLine(struct linenoiseState *l) { + char seq[64]; + size_t plen = strlen(l->prompt); + int fd = l->ofd; + char *buf = l->buf; + size_t len = l->len; + size_t pos = l->pos; + struct abuf ab; + + while((plen+pos) >= l->cols) { + buf++; + len--; + pos--; + } + while (plen+len > l->cols) { + len--; + } + + abInit(&ab); + /* Cursor to left edge */ + snprintf(seq,64,"\r"); + abAppend(&ab,seq,strlen(seq)); + /* Write the prompt and the current buffer content */ + abAppend(&ab,l->prompt,strlen(l->prompt)); + if (maskmode == 1) { + while (len--) abAppend(&ab,"*",1); + } else { + abAppend(&ab,buf,len); + } + /* Show hits if any. */ + refreshShowHints(&ab,l,plen); + /* Erase to right */ + snprintf(seq,64,"\x1b[0K"); + abAppend(&ab,seq,strlen(seq)); + /* Move cursor to original position. */ + snprintf(seq,64,"\r\x1b[%dC", (int)(pos+plen)); + abAppend(&ab,seq,strlen(seq)); + if (write(fd,ab.b,ab.len) == -1) {} /* Can't recover from write error. */ + abFree(&ab); +} + +/* Multi line low level line refresh. + * + * Rewrite the currently edited line accordingly to the buffer content, + * cursor position, and number of columns of the terminal. */ +static void refreshMultiLine(struct linenoiseState *l) { + char seq[64]; + int plen = strlen(l->prompt); + int rows = (plen+l->len+l->cols-1)/l->cols; /* rows used by current buf. */ + int rpos = (plen+l->oldpos+l->cols)/l->cols; /* cursor relative row. */ + int rpos2; /* rpos after refresh. */ + int col; /* colum position, zero-based. */ + int old_rows = l->maxrows; + int fd = l->ofd, j; + struct abuf ab; + + /* Update maxrows if needed. */ + if (rows > (int)l->maxrows) l->maxrows = rows; + + /* First step: clear all the lines used before. To do so start by + * going to the last row. */ + abInit(&ab); + if (old_rows-rpos > 0) { + lndebug("go down %d", old_rows-rpos); + snprintf(seq,64,"\x1b[%dB", old_rows-rpos); + abAppend(&ab,seq,strlen(seq)); + } + + /* Now for every row clear it, go up. */ + for (j = 0; j < old_rows-1; j++) { + lndebug("clear+up"); + snprintf(seq,64,"\r\x1b[0K\x1b[1A"); + abAppend(&ab,seq,strlen(seq)); + } + + /* Clean the top line. */ + lndebug("clear"); + snprintf(seq,64,"\r\x1b[0K"); + abAppend(&ab,seq,strlen(seq)); + + /* Write the prompt and the current buffer content */ + abAppend(&ab,l->prompt,strlen(l->prompt)); + if (maskmode == 1) { + unsigned int i; + for (i = 0; i < l->len; i++) abAppend(&ab,"*",1); + } else { + abAppend(&ab,l->buf,l->len); + } + + /* Show hits if any. */ + refreshShowHints(&ab,l,plen); + + /* If we are at the very end of the screen with our prompt, we need to + * emit a newline and move the prompt to the first column. */ + if (l->pos && + l->pos == l->len && + (l->pos+plen) % l->cols == 0) + { + lndebug("<newline>"); + abAppend(&ab,"\n",1); + snprintf(seq,64,"\r"); + abAppend(&ab,seq,strlen(seq)); + rows++; + if (rows > (int)l->maxrows) l->maxrows = rows; + } + + /* Move cursor to right position. */ + rpos2 = (plen+l->pos+l->cols)/l->cols; /* current cursor relative row. */ + lndebug("rpos2 %d", rpos2); + + /* Go up till we reach the expected position. */ + if (rows-rpos2 > 0) { + lndebug("go-up %d", rows-rpos2); + snprintf(seq,64,"\x1b[%dA", rows-rpos2); + abAppend(&ab,seq,strlen(seq)); + } + + /* Set column. */ + col = (plen+(int)l->pos) % (int)l->cols; + lndebug("set col %d", 1+col); + if (col) + snprintf(seq,64,"\r\x1b[%dC", col); + else + snprintf(seq,64,"\r"); + abAppend(&ab,seq,strlen(seq)); + + lndebug("\n"); + l->oldpos = l->pos; + + if (write(fd,ab.b,ab.len) == -1) {} /* Can't recover from write error. */ + abFree(&ab); +} + +/* Calls the two low level functions refreshSingleLine() or + * refreshMultiLine() according to the selected mode. */ +static void refreshLine(struct linenoiseState *l) { + if (mlmode) + refreshMultiLine(l); + else + refreshSingleLine(l); +} + +/* Insert the character 'c' at cursor current position. + * + * On error writing to the terminal -1 is returned, otherwise 0. */ +int linenoiseEditInsert(struct linenoiseState *l, char c) { + if (l->len < l->buflen) { + if (l->len == l->pos) { + l->buf[l->pos] = c; + l->pos++; + l->len++; + l->buf[l->len] = '\0'; + if ((!mlmode && l->plen+l->len < l->cols && !hintsCallback)) { + /* Avoid a full update of the line in the + * trivial case. */ + char d = (maskmode==1) ? '*' : c; + if (write(l->ofd,&d,1) == -1) return -1; + } else { + refreshLine(l); + } + } else { + memmove(l->buf+l->pos+1,l->buf+l->pos,l->len-l->pos); + l->buf[l->pos] = c; + l->len++; + l->pos++; + l->buf[l->len] = '\0'; + refreshLine(l); + } + } + return 0; +} + +/* Move cursor on the left. */ +void linenoiseEditMoveLeft(struct linenoiseState *l) { + if (l->pos > 0) { + l->pos--; + refreshLine(l); + } +} + +/* Move cursor on the right. */ +void linenoiseEditMoveRight(struct linenoiseState *l) { + if (l->pos != l->len) { + l->pos++; + refreshLine(l); + } +} + +/* Move cursor to the start of the line. */ +void linenoiseEditMoveHome(struct linenoiseState *l) { + if (l->pos != 0) { + l->pos = 0; + refreshLine(l); + } +} + +/* Move cursor to the end of the line. */ +void linenoiseEditMoveEnd(struct linenoiseState *l) { + if (l->pos != l->len) { + l->pos = l->len; + refreshLine(l); + } +} + +/* Substitute the currently edited line with the next or previous history + * entry as specified by 'dir'. */ +#define LINENOISE_HISTORY_NEXT 0 +#define LINENOISE_HISTORY_PREV 1 +void linenoiseEditHistoryNext(struct linenoiseState *l, int dir) { + if (history_len > 1) { + /* Update the current history entry before to + * overwrite it with the next one. */ + free(history[history_len - 1 - l->history_index]); + history[history_len - 1 - l->history_index] = strdup(l->buf); + /* Show the new entry */ + l->history_index += (dir == LINENOISE_HISTORY_PREV) ? 1 : -1; + if (l->history_index < 0) { + l->history_index = 0; + return; + } else if (l->history_index >= history_len) { + l->history_index = history_len-1; + return; + } + strncpy(l->buf,history[history_len - 1 - l->history_index],l->buflen); + l->buf[l->buflen-1] = '\0'; + l->len = l->pos = strlen(l->buf); + refreshLine(l); + } +} + +/* Delete the character at the right of the cursor without altering the cursor + * position. Basically this is what happens with the "Delete" keyboard key. */ +void linenoiseEditDelete(struct linenoiseState *l) { + if (l->len > 0 && l->pos < l->len) { + memmove(l->buf+l->pos,l->buf+l->pos+1,l->len-l->pos-1); + l->len--; + l->buf[l->len] = '\0'; + refreshLine(l); + } +} + +/* Backspace implementation. */ +void linenoiseEditBackspace(struct linenoiseState *l) { + if (l->pos > 0 && l->len > 0) { + memmove(l->buf+l->pos-1,l->buf+l->pos,l->len-l->pos); + l->pos--; + l->len--; + l->buf[l->len] = '\0'; + refreshLine(l); + } +} + +/* Delete the previous word, maintaining the cursor at the start of the + * current word. */ +void linenoiseEditDeletePrevWord(struct linenoiseState *l) { + size_t old_pos = l->pos; + size_t diff; + + while (l->pos > 0 && l->buf[l->pos-1] == ' ') + l->pos--; + while (l->pos > 0 && l->buf[l->pos-1] != ' ') + l->pos--; + diff = old_pos - l->pos; + memmove(l->buf+l->pos,l->buf+old_pos,l->len-old_pos+1); + l->len -= diff; + refreshLine(l); +} + +/* This function is the core of the line editing capability of linenoise. + * It expects 'fd' to be already in "raw mode" so that every key pressed + * will be returned ASAP to read(). + * + * The resulting string is put into 'buf' when the user type enter, or + * when ctrl+d is typed. + * + * The function returns the length of the current buffer. */ +static int linenoiseEdit(int stdin_fd, int stdout_fd, char *buf, size_t buflen, const char *prompt) +{ + struct linenoiseState l; + + /* Populate the linenoise state that we pass to functions implementing + * specific editing functionalities. */ + l.ifd = stdin_fd; + l.ofd = stdout_fd; + l.buf = buf; + l.buflen = buflen; + l.prompt = prompt; + l.plen = strlen(prompt); + l.oldpos = l.pos = 0; + l.len = 0; + l.cols = getColumns(stdin_fd, stdout_fd); + l.maxrows = 0; + l.history_index = 0; + + /* Buffer starts empty. */ + l.buf[0] = '\0'; + l.buflen--; /* Make sure there is always space for the nulterm */ + + /* The latest history entry is always our current buffer, that + * initially is just an empty string. */ + linenoiseHistoryAdd(""); + + if (write(l.ofd,prompt,l.plen) == -1) return -1; + while(1) { + char c; + int nread; + char seq[3]; + + nread = read(l.ifd,&c,1); + if (nread <= 0) return l.len; + + /* Only autocomplete when the callback is set. It returns < 0 when + * there was an error reading from fd. Otherwise it will return the + * character that should be handled next. */ + if (c == 9 && completionCallback != NULL) { + c = completeLine(&l); + /* Return on errors */ + if (c < 0) return l.len; + /* Read next character when 0 */ + if (c == 0) continue; + } + + switch(c) { + case NL: /* enter, typed before raw mode was enabled */ + break; + case ENTER: /* enter */ + history_len--; + free(history[history_len]); + if (mlmode) linenoiseEditMoveEnd(&l); + if (hintsCallback) { + /* Force a refresh without hints to leave the previous + * line as the user typed it after a newline. */ + linenoiseHintsCallback *hc = hintsCallback; + hintsCallback = NULL; + refreshLine(&l); + hintsCallback = hc; + } + return (int)l.len; + case CTRL_C: /* ctrl-c */ + errno = EAGAIN; + return -1; + case BACKSPACE: /* backspace */ + case 8: /* ctrl-h */ + linenoiseEditBackspace(&l); + break; + case CTRL_D: /* ctrl-d, remove char at right of cursor, or if the + line is empty, act as end-of-file. */ + if (l.len > 0) { + linenoiseEditDelete(&l); + } else { + history_len--; + free(history[history_len]); + return -1; + } + break; + case CTRL_T: /* ctrl-t, swaps current character with previous. */ + if (l.pos > 0 && l.pos < l.len) { + int aux = buf[l.pos-1]; + buf[l.pos-1] = buf[l.pos]; + buf[l.pos] = aux; + if (l.pos != l.len-1) l.pos++; + refreshLine(&l); + } + break; + case CTRL_B: /* ctrl-b */ + linenoiseEditMoveLeft(&l); + break; + case CTRL_F: /* ctrl-f */ + linenoiseEditMoveRight(&l); + break; + case CTRL_P: /* ctrl-p */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_PREV); + break; + case CTRL_N: /* ctrl-n */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_NEXT); + break; + case ESC: /* escape sequence */ + /* Read the next two bytes representing the escape sequence. + * Use two calls to handle slow terminals returning the two + * chars at different times. */ + if (read(l.ifd,seq,1) == -1) break; + if (read(l.ifd,seq+1,1) == -1) break; + + /* ESC [ sequences. */ + if (seq[0] == '[') { + if (seq[1] >= '0' && seq[1] <= '9') { + /* Extended escape, read additional byte. */ + if (read(l.ifd,seq+2,1) == -1) break; + if (seq[2] == '~') { + switch(seq[1]) { + case '3': /* Delete key. */ + linenoiseEditDelete(&l); + break; + } + } + } else { + switch(seq[1]) { + case 'A': /* Up */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_PREV); + break; + case 'B': /* Down */ + linenoiseEditHistoryNext(&l, LINENOISE_HISTORY_NEXT); + break; + case 'C': /* Right */ + linenoiseEditMoveRight(&l); + break; + case 'D': /* Left */ + linenoiseEditMoveLeft(&l); + break; + case 'H': /* Home */ + linenoiseEditMoveHome(&l); + break; + case 'F': /* End*/ + linenoiseEditMoveEnd(&l); + break; + } + } + } + + /* ESC O sequences. */ + else if (seq[0] == 'O') { + switch(seq[1]) { + case 'H': /* Home */ + linenoiseEditMoveHome(&l); + break; + case 'F': /* End*/ + linenoiseEditMoveEnd(&l); + break; + } + } + break; + default: + if (linenoiseEditInsert(&l,c)) return -1; + break; + case CTRL_U: /* Ctrl+u, delete the whole line. */ + buf[0] = '\0'; + l.pos = l.len = 0; + refreshLine(&l); + break; + case CTRL_K: /* Ctrl+k, delete from current to end of line. */ + buf[l.pos] = '\0'; + l.len = l.pos; + refreshLine(&l); + break; + case CTRL_A: /* Ctrl+a, go to the start of the line */ + linenoiseEditMoveHome(&l); + break; + case CTRL_E: /* ctrl+e, go to the end of the line */ + linenoiseEditMoveEnd(&l); + break; + case CTRL_L: /* ctrl+l, clear screen */ + linenoiseClearScreen(); + refreshLine(&l); + break; + case CTRL_W: /* ctrl+w, delete previous word */ + linenoiseEditDeletePrevWord(&l); + break; + } + } + return l.len; +} + +/* This special mode is used by linenoise in order to print scan codes + * on screen for debugging / development purposes. It is implemented + * by the linenoise_example program using the --keycodes option. */ +void linenoisePrintKeyCodes(void) { + char quit[4]; + + printf("Linenoise key codes debugging mode.\n" + "Press keys to see scan codes. Type 'quit' at any time to exit.\n"); + if (enableRawMode(STDIN_FILENO) == -1) return; + memset(quit,' ',4); + while(1) { + char c; + int nread; + + nread = read(STDIN_FILENO,&c,1); + if (nread <= 0) continue; + memmove(quit,quit+1,sizeof(quit)-1); /* shift string to left. */ + quit[sizeof(quit)-1] = c; /* Insert current char on the right. */ + if (memcmp(quit,"quit",sizeof(quit)) == 0) break; + + printf("'%c' %02x (%d) (type quit to exit)\n", + isprint(c) ? c : '?', (int)c, (int)c); + printf("\r"); /* Go left edge manually, we are in raw mode. */ + fflush(stdout); + } + disableRawMode(STDIN_FILENO); +} + +/* This function calls the line editing function linenoiseEdit() using + * the STDIN file descriptor set in raw mode. */ +static int linenoiseRaw(char *buf, size_t buflen, const char *prompt) { + int count; + + if (buflen == 0) { + errno = EINVAL; + return -1; + } + + if (enableRawMode(STDIN_FILENO) == -1) return -1; + count = linenoiseEdit(STDIN_FILENO, STDOUT_FILENO, buf, buflen, prompt); + disableRawMode(STDIN_FILENO); + printf("\n"); + return count; +} + +/* This function is called when linenoise() is called with the standard + * input file descriptor not attached to a TTY. So for example when the + * program using linenoise is called in pipe or with a file redirected + * to its standard input. In this case, we want to be able to return the + * line regardless of its length (by default we are limited to 4k). */ +static char *linenoiseNoTTY(void) { + char *line = NULL; + size_t len = 0, maxlen = 0; + + while(1) { + if (len == maxlen) { + if (maxlen == 0) maxlen = 16; + maxlen *= 2; + char *oldval = line; + line = realloc(line,maxlen); + if (line == NULL) { + if (oldval) free(oldval); + return NULL; + } + } + int c = fgetc(stdin); + if (c == EOF || c == '\n') { + if (c == EOF && len == 0) { + free(line); + return NULL; + } else { + line[len] = '\0'; + return line; + } + } else { + line[len] = c; + len++; + } + } +} + +/* The high level function that is the main API of the linenoise library. + * This function checks if the terminal has basic capabilities, just checking + * for a blacklist of stupid terminals, and later either calls the line + * editing function or uses dummy fgets() so that you will be able to type + * something even in the most desperate of the conditions. */ +char *linenoise(const char *prompt) { + char buf[LINENOISE_MAX_LINE]; + int count; + + if (!isatty(STDIN_FILENO)) { + /* Not a tty: read from file / pipe. In this mode we don't want any + * limit to the line size, so we call a function to handle that. */ + return linenoiseNoTTY(); + } else if (isUnsupportedTerm()) { + size_t len; + + printf("%s",prompt); + fflush(stdout); + if (fgets(buf,LINENOISE_MAX_LINE,stdin) == NULL) return NULL; + len = strlen(buf); + while(len && (buf[len-1] == '\n' || buf[len-1] == '\r')) { + len--; + buf[len] = '\0'; + } + return strdup(buf); + } else { + count = linenoiseRaw(buf,LINENOISE_MAX_LINE,prompt); + if (count == -1) return NULL; + return strdup(buf); + } +} + +/* This is just a wrapper the user may want to call in order to make sure + * the linenoise returned buffer is freed with the same allocator it was + * created with. Useful when the main program is using an alternative + * allocator. */ +void linenoiseFree(void *ptr) { + free(ptr); +} + +/* ================================ History ================================= */ + +/* Free the history, but does not reset it. Only used when we have to + * exit() to avoid memory leaks are reported by valgrind & co. */ +static void freeHistory(void) { + if (history) { + int j; + + for (j = 0; j < history_len; j++) + free(history[j]); + free(history); + } +} + +/* At exit we'll try to fix the terminal to the initial conditions. */ +static void linenoiseAtExit(void) { + disableRawMode(STDIN_FILENO); + freeHistory(); +} + +/* This is the API call to add a new entry in the linenoise history. + * It uses a fixed array of char pointers that are shifted (memmoved) + * when the history max length is reached in order to remove the older + * entry and make room for the new one, so it is not exactly suitable for huge + * histories, but will work well for a few hundred of entries. + * + * Using a circular buffer is smarter, but a bit more complex to handle. */ +int linenoiseHistoryAdd(const char *line) { + char *linecopy; + + if (history_max_len == 0) return 0; + + /* Initialization on first call. */ + if (history == NULL) { + history = malloc(sizeof(char*)*history_max_len); + if (history == NULL) return 0; + memset(history,0,(sizeof(char*)*history_max_len)); + } + + /* Don't add duplicated lines. */ + if (history_len && !strcmp(history[history_len-1], line)) return 0; + + /* Add an heap allocated copy of the line in the history. + * If we reached the max length, remove the older line. */ + linecopy = strdup(line); + if (!linecopy) return 0; + if (history_len == history_max_len) { + free(history[0]); + memmove(history,history+1,sizeof(char*)*(history_max_len-1)); + history_len--; + } + history[history_len] = linecopy; + history_len++; + return 1; +} + +/* Set the maximum length for the history. This function can be called even + * if there is already some history, the function will make sure to retain + * just the latest 'len' elements if the new history length value is smaller + * than the amount of items already inside the history. */ +int linenoiseHistorySetMaxLen(int len) { + char **new; + + if (len < 1) return 0; + if (history) { + int tocopy = history_len; + + new = malloc(sizeof(char*)*len); + if (new == NULL) return 0; + + /* If we can't copy everything, free the elements we'll not use. */ + if (len < tocopy) { + int j; + + for (j = 0; j < tocopy-len; j++) free(history[j]); + tocopy = len; + } + memset(new,0,sizeof(char*)*len); + memcpy(new,history+(history_len-tocopy), sizeof(char*)*tocopy); + free(history); + history = new; + } + history_max_len = len; + if (history_len > history_max_len) + history_len = history_max_len; + return 1; +} + +/* Save the history in the specified file. On success 0 is returned + * otherwise -1 is returned. */ +int linenoiseHistorySave(const char *filename) { + mode_t old_umask = umask(S_IXUSR|S_IRWXG|S_IRWXO); + FILE *fp; + int j; + + fp = fopen(filename,"w"); + umask(old_umask); + if (fp == NULL) return -1; + fchmod(fileno(fp),S_IRUSR|S_IWUSR); + for (j = 0; j < history_len; j++) + fprintf(fp,"%s\n",history[j]); + fclose(fp); + return 0; +} + +/* Load the history from the specified file. If the file does not exist + * zero is returned and no operation is performed. + * + * If the file exists and the operation succeeded 0 is returned, otherwise + * on error -1 is returned. */ +int linenoiseHistoryLoad(const char *filename) { + FILE *fp = fopen(filename,"r"); + char buf[LINENOISE_MAX_LINE]; + + if (fp == NULL) return -1; + + while (fgets(buf,LINENOISE_MAX_LINE,fp) != NULL) { + char *p; + + p = strchr(buf,'\r'); + if (!p) p = strchr(buf,'\n'); + if (p) *p = '\0'; + linenoiseHistoryAdd(buf); + } + fclose(fp); + return 0; +} diff --git a/deps/linenoise/linenoise.h b/deps/linenoise/linenoise.h new file mode 100644 index 0000000..6dfee73 --- /dev/null +++ b/deps/linenoise/linenoise.h @@ -0,0 +1,75 @@ +/* linenoise.h -- VERSION 1.0 + * + * Guerrilla line editing library against the idea that a line editing lib + * needs to be 20,000 lines of C code. + * + * See linenoise.c for more information. + * + * ------------------------------------------------------------------------ + * + * Copyright (c) 2010-2014, Salvatore Sanfilippo <antirez at gmail dot com> + * Copyright (c) 2010-2013, Pieter Noordhuis <pcnoordhuis at gmail dot com> + * + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions are + * met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +#ifndef __LINENOISE_H +#define __LINENOISE_H + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct linenoiseCompletions { + size_t len; + char **cvec; +} linenoiseCompletions; + +typedef void(linenoiseCompletionCallback)(const char *, linenoiseCompletions *); +typedef char*(linenoiseHintsCallback)(const char *, int *color, int *bold); +typedef void(linenoiseFreeHintsCallback)(void *); +void linenoiseSetCompletionCallback(linenoiseCompletionCallback *); +void linenoiseSetHintsCallback(linenoiseHintsCallback *); +void linenoiseSetFreeHintsCallback(linenoiseFreeHintsCallback *); +void linenoiseAddCompletion(linenoiseCompletions *, const char *); + +char *linenoise(const char *prompt); +void linenoiseFree(void *ptr); +int linenoiseHistoryAdd(const char *line); +int linenoiseHistorySetMaxLen(int len); +int linenoiseHistorySave(const char *filename); +int linenoiseHistoryLoad(const char *filename); +void linenoiseClearScreen(void); +void linenoiseSetMultiLine(int ml); +void linenoisePrintKeyCodes(void); +void linenoiseMaskModeEnable(void); +void linenoiseMaskModeDisable(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __LINENOISE_H */ |