summaryrefslogtreecommitdiffstats
path: root/redis.conf
diff options
context:
space:
mode:
Diffstat (limited to 'redis.conf')
-rw-r--r--redis.conf2295
1 files changed, 2295 insertions, 0 deletions
diff --git a/redis.conf b/redis.conf
new file mode 100644
index 0000000..97f077b
--- /dev/null
+++ b/redis.conf
@@ -0,0 +1,2295 @@
+# Redis configuration file example.
+#
+# Note that in order to read the configuration file, Redis must be
+# started with the file path as first argument:
+#
+# ./redis-server /path/to/redis.conf
+
+# Note on units: when memory size is needed, it is possible to specify
+# it in the usual form of 1k 5GB 4M and so forth:
+#
+# 1k => 1000 bytes
+# 1kb => 1024 bytes
+# 1m => 1000000 bytes
+# 1mb => 1024*1024 bytes
+# 1g => 1000000000 bytes
+# 1gb => 1024*1024*1024 bytes
+#
+# units are case insensitive so 1GB 1Gb 1gB are all the same.
+
+################################## INCLUDES ###################################
+
+# Include one or more other config files here. This is useful if you
+# have a standard template that goes to all Redis servers but also need
+# to customize a few per-server settings. Include files can include
+# other files, so use this wisely.
+#
+# Note that option "include" won't be rewritten by command "CONFIG REWRITE"
+# from admin or Redis Sentinel. Since Redis always uses the last processed
+# line as value of a configuration directive, you'd better put includes
+# at the beginning of this file to avoid overwriting config change at runtime.
+#
+# If instead you are interested in using includes to override configuration
+# options, it is better to use include as the last line.
+#
+# Included paths may contain wildcards. All files matching the wildcards will
+# be included in alphabetical order.
+# Note that if an include path contains a wildcards but no files match it when
+# the server is started, the include statement will be ignored and no error will
+# be emitted. It is safe, therefore, to include wildcard files from empty
+# directories.
+#
+# include /path/to/local.conf
+# include /path/to/other.conf
+# include /path/to/fragments/*.conf
+#
+
+################################## MODULES #####################################
+
+# Load modules at startup. If the server is not able to load modules
+# it will abort. It is possible to use multiple loadmodule directives.
+#
+# loadmodule /path/to/my_module.so
+# loadmodule /path/to/other_module.so
+
+################################## NETWORK #####################################
+
+# By default, if no "bind" configuration directive is specified, Redis listens
+# for connections from all available network interfaces on the host machine.
+# It is possible to listen to just one or multiple selected interfaces using
+# the "bind" configuration directive, followed by one or more IP addresses.
+# Each address can be prefixed by "-", which means that redis will not fail to
+# start if the address is not available. Being not available only refers to
+# addresses that does not correspond to any network interface. Addresses that
+# are already in use will always fail, and unsupported protocols will always BE
+# silently skipped.
+#
+# Examples:
+#
+# bind 192.168.1.100 10.0.0.1 # listens on two specific IPv4 addresses
+# bind 127.0.0.1 ::1 # listens on loopback IPv4 and IPv6
+# bind * -::* # like the default, all available interfaces
+#
+# ~~~ WARNING ~~~ If the computer running Redis is directly exposed to the
+# internet, binding to all the interfaces is dangerous and will expose the
+# instance to everybody on the internet. So by default we uncomment the
+# following bind directive, that will force Redis to listen only on the
+# IPv4 and IPv6 (if available) loopback interface addresses (this means Redis
+# will only be able to accept client connections from the same host that it is
+# running on).
+#
+# IF YOU ARE SURE YOU WANT YOUR INSTANCE TO LISTEN TO ALL THE INTERFACES
+# COMMENT OUT THE FOLLOWING LINE.
+#
+# You will also need to set a password unless you explicitly disable protected
+# mode.
+# ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+bind 127.0.0.1 -::1
+
+# By default, outgoing connections (from replica to master, from Sentinel to
+# instances, cluster bus, etc.) are not bound to a specific local address. In
+# most cases, this means the operating system will handle that based on routing
+# and the interface through which the connection goes out.
+#
+# Using bind-source-addr it is possible to configure a specific address to bind
+# to, which may also affect how the connection gets routed.
+#
+# Example:
+#
+# bind-source-addr 10.0.0.1
+
+# Protected mode is a layer of security protection, in order to avoid that
+# Redis instances left open on the internet are accessed and exploited.
+#
+# When protected mode is on and the default user has no password, the server
+# only accepts local connections from the IPv4 address (127.0.0.1), IPv6 address
+# (::1) or Unix domain sockets.
+#
+# By default protected mode is enabled. You should disable it only if
+# you are sure you want clients from other hosts to connect to Redis
+# even if no authentication is configured.
+protected-mode yes
+
+# Redis uses default hardened security configuration directives to reduce the
+# attack surface on innocent users. Therefore, several sensitive configuration
+# directives are immutable, and some potentially-dangerous commands are blocked.
+#
+# Configuration directives that control files that Redis writes to (e.g., 'dir'
+# and 'dbfilename') and that aren't usually modified during runtime
+# are protected by making them immutable.
+#
+# Commands that can increase the attack surface of Redis and that aren't usually
+# called by users are blocked by default.
+#
+# These can be exposed to either all connections or just local ones by setting
+# each of the configs listed below to either of these values:
+#
+# no - Block for any connection (remain immutable)
+# yes - Allow for any connection (no protection)
+# local - Allow only for local connections. Ones originating from the
+# IPv4 address (127.0.0.1), IPv6 address (::1) or Unix domain sockets.
+#
+# enable-protected-configs no
+# enable-debug-command no
+# enable-module-command no
+
+# Accept connections on the specified port, default is 6379 (IANA #815344).
+# If port 0 is specified Redis will not listen on a TCP socket.
+port 6379
+
+# TCP listen() backlog.
+#
+# In high requests-per-second environments you need a high backlog in order
+# to avoid slow clients connection issues. Note that the Linux kernel
+# will silently truncate it to the value of /proc/sys/net/core/somaxconn so
+# make sure to raise both the value of somaxconn and tcp_max_syn_backlog
+# in order to get the desired effect.
+tcp-backlog 511
+
+# Unix socket.
+#
+# Specify the path for the Unix socket that will be used to listen for
+# incoming connections. There is no default, so Redis will not listen
+# on a unix socket when not specified.
+#
+# unixsocket /run/redis.sock
+# unixsocketperm 700
+
+# Close the connection after a client is idle for N seconds (0 to disable)
+timeout 0
+
+# TCP keepalive.
+#
+# If non-zero, use SO_KEEPALIVE to send TCP ACKs to clients in absence
+# of communication. This is useful for two reasons:
+#
+# 1) Detect dead peers.
+# 2) Force network equipment in the middle to consider the connection to be
+# alive.
+#
+# On Linux, the specified value (in seconds) is the period used to send ACKs.
+# Note that to close the connection the double of the time is needed.
+# On other kernels the period depends on the kernel configuration.
+#
+# A reasonable value for this option is 300 seconds, which is the new
+# Redis default starting with Redis 3.2.1.
+tcp-keepalive 300
+
+# Apply OS-specific mechanism to mark the listening socket with the specified
+# ID, to support advanced routing and filtering capabilities.
+#
+# On Linux, the ID represents a connection mark.
+# On FreeBSD, the ID represents a socket cookie ID.
+# On OpenBSD, the ID represents a route table ID.
+#
+# The default value is 0, which implies no marking is required.
+# socket-mark-id 0
+
+################################# TLS/SSL #####################################
+
+# By default, TLS/SSL is disabled. To enable it, the "tls-port" configuration
+# directive can be used to define TLS-listening ports. To enable TLS on the
+# default port, use:
+#
+# port 0
+# tls-port 6379
+
+# Configure a X.509 certificate and private key to use for authenticating the
+# server to connected clients, masters or cluster peers. These files should be
+# PEM formatted.
+#
+# tls-cert-file redis.crt
+# tls-key-file redis.key
+#
+# If the key file is encrypted using a passphrase, it can be included here
+# as well.
+#
+# tls-key-file-pass secret
+
+# Normally Redis uses the same certificate for both server functions (accepting
+# connections) and client functions (replicating from a master, establishing
+# cluster bus connections, etc.).
+#
+# Sometimes certificates are issued with attributes that designate them as
+# client-only or server-only certificates. In that case it may be desired to use
+# different certificates for incoming (server) and outgoing (client)
+# connections. To do that, use the following directives:
+#
+# tls-client-cert-file client.crt
+# tls-client-key-file client.key
+#
+# If the key file is encrypted using a passphrase, it can be included here
+# as well.
+#
+# tls-client-key-file-pass secret
+
+# Configure a DH parameters file to enable Diffie-Hellman (DH) key exchange,
+# required by older versions of OpenSSL (<3.0). Newer versions do not require
+# this configuration and recommend against it.
+#
+# tls-dh-params-file redis.dh
+
+# Configure a CA certificate(s) bundle or directory to authenticate TLS/SSL
+# clients and peers. Redis requires an explicit configuration of at least one
+# of these, and will not implicitly use the system wide configuration.
+#
+# tls-ca-cert-file ca.crt
+# tls-ca-cert-dir /etc/ssl/certs
+
+# By default, clients (including replica servers) on a TLS port are required
+# to authenticate using valid client side certificates.
+#
+# If "no" is specified, client certificates are not required and not accepted.
+# If "optional" is specified, client certificates are accepted and must be
+# valid if provided, but are not required.
+#
+# tls-auth-clients no
+# tls-auth-clients optional
+
+# By default, a Redis replica does not attempt to establish a TLS connection
+# with its master.
+#
+# Use the following directive to enable TLS on replication links.
+#
+# tls-replication yes
+
+# By default, the Redis Cluster bus uses a plain TCP connection. To enable
+# TLS for the bus protocol, use the following directive:
+#
+# tls-cluster yes
+
+# By default, only TLSv1.2 and TLSv1.3 are enabled and it is highly recommended
+# that older formally deprecated versions are kept disabled to reduce the attack surface.
+# You can explicitly specify TLS versions to support.
+# Allowed values are case insensitive and include "TLSv1", "TLSv1.1", "TLSv1.2",
+# "TLSv1.3" (OpenSSL >= 1.1.1) or any combination.
+# To enable only TLSv1.2 and TLSv1.3, use:
+#
+# tls-protocols "TLSv1.2 TLSv1.3"
+
+# Configure allowed ciphers. See the ciphers(1ssl) manpage for more information
+# about the syntax of this string.
+#
+# Note: this configuration applies only to <= TLSv1.2.
+#
+# tls-ciphers DEFAULT:!MEDIUM
+
+# Configure allowed TLSv1.3 ciphersuites. See the ciphers(1ssl) manpage for more
+# information about the syntax of this string, and specifically for TLSv1.3
+# ciphersuites.
+#
+# tls-ciphersuites TLS_CHACHA20_POLY1305_SHA256
+
+# When choosing a cipher, use the server's preference instead of the client
+# preference. By default, the server follows the client's preference.
+#
+# tls-prefer-server-ciphers yes
+
+# By default, TLS session caching is enabled to allow faster and less expensive
+# reconnections by clients that support it. Use the following directive to disable
+# caching.
+#
+# tls-session-caching no
+
+# Change the default number of TLS sessions cached. A zero value sets the cache
+# to unlimited size. The default size is 20480.
+#
+# tls-session-cache-size 5000
+
+# Change the default timeout of cached TLS sessions. The default timeout is 300
+# seconds.
+#
+# tls-session-cache-timeout 60
+
+################################# GENERAL #####################################
+
+# By default Redis does not run as a daemon. Use 'yes' if you need it.
+# Note that Redis will write a pid file in /var/run/redis.pid when daemonized.
+# When Redis is supervised by upstart or systemd, this parameter has no impact.
+daemonize no
+
+# If you run Redis from upstart or systemd, Redis can interact with your
+# supervision tree. Options:
+# supervised no - no supervision interaction
+# supervised upstart - signal upstart by putting Redis into SIGSTOP mode
+# requires "expect stop" in your upstart job config
+# supervised systemd - signal systemd by writing READY=1 to $NOTIFY_SOCKET
+# on startup, and updating Redis status on a regular
+# basis.
+# supervised auto - detect upstart or systemd method based on
+# UPSTART_JOB or NOTIFY_SOCKET environment variables
+# Note: these supervision methods only signal "process is ready."
+# They do not enable continuous pings back to your supervisor.
+#
+# The default is "no". To run under upstart/systemd, you can simply uncomment
+# the line below:
+#
+# supervised auto
+
+# If a pid file is specified, Redis writes it where specified at startup
+# and removes it at exit.
+#
+# When the server runs non daemonized, no pid file is created if none is
+# specified in the configuration. When the server is daemonized, the pid file
+# is used even if not specified, defaulting to "/var/run/redis.pid".
+#
+# Creating a pid file is best effort: if Redis is not able to create it
+# nothing bad happens, the server will start and run normally.
+#
+# Note that on modern Linux systems "/run/redis.pid" is more conforming
+# and should be used instead.
+pidfile /var/run/redis_6379.pid
+
+# Specify the server verbosity level.
+# This can be one of:
+# debug (a lot of information, useful for development/testing)
+# verbose (many rarely useful info, but not a mess like the debug level)
+# notice (moderately verbose, what you want in production probably)
+# warning (only very important / critical messages are logged)
+# nothing (nothing is logged)
+loglevel notice
+
+# Specify the log file name. Also the empty string can be used to force
+# Redis to log on the standard output. Note that if you use standard
+# output for logging but daemonize, logs will be sent to /dev/null
+logfile ""
+
+# To enable logging to the system logger, just set 'syslog-enabled' to yes,
+# and optionally update the other syslog parameters to suit your needs.
+# syslog-enabled no
+
+# Specify the syslog identity.
+# syslog-ident redis
+
+# Specify the syslog facility. Must be USER or between LOCAL0-LOCAL7.
+# syslog-facility local0
+
+# To disable the built in crash log, which will possibly produce cleaner core
+# dumps when they are needed, uncomment the following:
+#
+# crash-log-enabled no
+
+# To disable the fast memory check that's run as part of the crash log, which
+# will possibly let redis terminate sooner, uncomment the following:
+#
+# crash-memcheck-enabled no
+
+# Set the number of databases. The default database is DB 0, you can select
+# a different one on a per-connection basis using SELECT <dbid> where
+# dbid is a number between 0 and 'databases'-1
+databases 16
+
+# By default Redis shows an ASCII art logo only when started to log to the
+# standard output and if the standard output is a TTY and syslog logging is
+# disabled. Basically this means that normally a logo is displayed only in
+# interactive sessions.
+#
+# However it is possible to force the pre-4.0 behavior and always show a
+# ASCII art logo in startup logs by setting the following option to yes.
+always-show-logo no
+
+# By default, Redis modifies the process title (as seen in 'top' and 'ps') to
+# provide some runtime information. It is possible to disable this and leave
+# the process name as executed by setting the following to no.
+set-proc-title yes
+
+# When changing the process title, Redis uses the following template to construct
+# the modified title.
+#
+# Template variables are specified in curly brackets. The following variables are
+# supported:
+#
+# {title} Name of process as executed if parent, or type of child process.
+# {listen-addr} Bind address or '*' followed by TCP or TLS port listening on, or
+# Unix socket if only that's available.
+# {server-mode} Special mode, i.e. "[sentinel]" or "[cluster]".
+# {port} TCP port listening on, or 0.
+# {tls-port} TLS port listening on, or 0.
+# {unixsocket} Unix domain socket listening on, or "".
+# {config-file} Name of configuration file used.
+#
+proc-title-template "{title} {listen-addr} {server-mode}"
+
+# Set the local environment which is used for string comparison operations, and
+# also affect the performance of Lua scripts. Empty String indicates the locale
+# is derived from the environment variables.
+locale-collate ""
+
+################################ SNAPSHOTTING ################################
+
+# Save the DB to disk.
+#
+# save <seconds> <changes> [<seconds> <changes> ...]
+#
+# Redis will save the DB if the given number of seconds elapsed and it
+# surpassed the given number of write operations against the DB.
+#
+# Snapshotting can be completely disabled with a single empty string argument
+# as in following example:
+#
+# save ""
+#
+# Unless specified otherwise, by default Redis will save the DB:
+# * After 3600 seconds (an hour) if at least 1 change was performed
+# * After 300 seconds (5 minutes) if at least 100 changes were performed
+# * After 60 seconds if at least 10000 changes were performed
+#
+# You can set these explicitly by uncommenting the following line.
+#
+# save 3600 1 300 100 60 10000
+
+# By default Redis will stop accepting writes if RDB snapshots are enabled
+# (at least one save point) and the latest background save failed.
+# This will make the user aware (in a hard way) that data is not persisting
+# on disk properly, otherwise chances are that no one will notice and some
+# disaster will happen.
+#
+# If the background saving process will start working again Redis will
+# automatically allow writes again.
+#
+# However if you have setup your proper monitoring of the Redis server
+# and persistence, you may want to disable this feature so that Redis will
+# continue to work as usual even if there are problems with disk,
+# permissions, and so forth.
+stop-writes-on-bgsave-error yes
+
+# Compress string objects using LZF when dump .rdb databases?
+# By default compression is enabled as it's almost always a win.
+# If you want to save some CPU in the saving child set it to 'no' but
+# the dataset will likely be bigger if you have compressible values or keys.
+rdbcompression yes
+
+# Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
+# This makes the format more resistant to corruption but there is a performance
+# hit to pay (around 10%) when saving and loading RDB files, so you can disable it
+# for maximum performances.
+#
+# RDB files created with checksum disabled have a checksum of zero that will
+# tell the loading code to skip the check.
+rdbchecksum yes
+
+# Enables or disables full sanitization checks for ziplist and listpack etc when
+# loading an RDB or RESTORE payload. This reduces the chances of a assertion or
+# crash later on while processing commands.
+# Options:
+# no - Never perform full sanitization
+# yes - Always perform full sanitization
+# clients - Perform full sanitization only for user connections.
+# Excludes: RDB files, RESTORE commands received from the master
+# connection, and client connections which have the
+# skip-sanitize-payload ACL flag.
+# The default should be 'clients' but since it currently affects cluster
+# resharding via MIGRATE, it is temporarily set to 'no' by default.
+#
+# sanitize-dump-payload no
+
+# The filename where to dump the DB
+dbfilename dump.rdb
+
+# Remove RDB files used by replication in instances without persistence
+# enabled. By default this option is disabled, however there are environments
+# where for regulations or other security concerns, RDB files persisted on
+# disk by masters in order to feed replicas, or stored on disk by replicas
+# in order to load them for the initial synchronization, should be deleted
+# ASAP. Note that this option ONLY WORKS in instances that have both AOF
+# and RDB persistence disabled, otherwise is completely ignored.
+#
+# An alternative (and sometimes better) way to obtain the same effect is
+# to use diskless replication on both master and replicas instances. However
+# in the case of replicas, diskless is not always an option.
+rdb-del-sync-files no
+
+# The working directory.
+#
+# The DB will be written inside this directory, with the filename specified
+# above using the 'dbfilename' configuration directive.
+#
+# The Append Only File will also be created inside this directory.
+#
+# Note that you must specify a directory here, not a file name.
+dir ./
+
+################################# REPLICATION #################################
+
+# Master-Replica replication. Use replicaof to make a Redis instance a copy of
+# another Redis server. A few things to understand ASAP about Redis replication.
+#
+# +------------------+ +---------------+
+# | Master | ---> | Replica |
+# | (receive writes) | | (exact copy) |
+# +------------------+ +---------------+
+#
+# 1) Redis replication is asynchronous, but you can configure a master to
+# stop accepting writes if it appears to be not connected with at least
+# a given number of replicas.
+# 2) Redis replicas are able to perform a partial resynchronization with the
+# master if the replication link is lost for a relatively small amount of
+# time. You may want to configure the replication backlog size (see the next
+# sections of this file) with a sensible value depending on your needs.
+# 3) Replication is automatic and does not need user intervention. After a
+# network partition replicas automatically try to reconnect to masters
+# and resynchronize with them.
+#
+# replicaof <masterip> <masterport>
+
+# If the master is password protected (using the "requirepass" configuration
+# directive below) it is possible to tell the replica to authenticate before
+# starting the replication synchronization process, otherwise the master will
+# refuse the replica request.
+#
+# masterauth <master-password>
+#
+# However this is not enough if you are using Redis ACLs (for Redis version
+# 6 or greater), and the default user is not capable of running the PSYNC
+# command and/or other commands needed for replication. In this case it's
+# better to configure a special user to use with replication, and specify the
+# masteruser configuration as such:
+#
+# masteruser <username>
+#
+# When masteruser is specified, the replica will authenticate against its
+# master using the new AUTH form: AUTH <username> <password>.
+
+# When a replica loses its connection with the master, or when the replication
+# is still in progress, the replica can act in two different ways:
+#
+# 1) if replica-serve-stale-data is set to 'yes' (the default) the replica will
+# still reply to client requests, possibly with out of date data, or the
+# data set may just be empty if this is the first synchronization.
+#
+# 2) If replica-serve-stale-data is set to 'no' the replica will reply with error
+# "MASTERDOWN Link with MASTER is down and replica-serve-stale-data is set to 'no'"
+# to all data access commands, excluding commands such as:
+# INFO, REPLICAOF, AUTH, SHUTDOWN, REPLCONF, ROLE, CONFIG, SUBSCRIBE,
+# UNSUBSCRIBE, PSUBSCRIBE, PUNSUBSCRIBE, PUBLISH, PUBSUB, COMMAND, POST,
+# HOST and LATENCY.
+#
+replica-serve-stale-data yes
+
+# You can configure a replica instance to accept writes or not. Writing against
+# a replica instance may be useful to store some ephemeral data (because data
+# written on a replica will be easily deleted after resync with the master) but
+# may also cause problems if clients are writing to it because of a
+# misconfiguration.
+#
+# Since Redis 2.6 by default replicas are read-only.
+#
+# Note: read only replicas are not designed to be exposed to untrusted clients
+# on the internet. It's just a protection layer against misuse of the instance.
+# Still a read only replica exports by default all the administrative commands
+# such as CONFIG, DEBUG, and so forth. To a limited extent you can improve
+# security of read only replicas using 'rename-command' to shadow all the
+# administrative / dangerous commands.
+replica-read-only yes
+
+# Replication SYNC strategy: disk or socket.
+#
+# New replicas and reconnecting replicas that are not able to continue the
+# replication process just receiving differences, need to do what is called a
+# "full synchronization". An RDB file is transmitted from the master to the
+# replicas.
+#
+# The transmission can happen in two different ways:
+#
+# 1) Disk-backed: The Redis master creates a new process that writes the RDB
+# file on disk. Later the file is transferred by the parent
+# process to the replicas incrementally.
+# 2) Diskless: The Redis master creates a new process that directly writes the
+# RDB file to replica sockets, without touching the disk at all.
+#
+# With disk-backed replication, while the RDB file is generated, more replicas
+# can be queued and served with the RDB file as soon as the current child
+# producing the RDB file finishes its work. With diskless replication instead
+# once the transfer starts, new replicas arriving will be queued and a new
+# transfer will start when the current one terminates.
+#
+# When diskless replication is used, the master waits a configurable amount of
+# time (in seconds) before starting the transfer in the hope that multiple
+# replicas will arrive and the transfer can be parallelized.
+#
+# With slow disks and fast (large bandwidth) networks, diskless replication
+# works better.
+repl-diskless-sync yes
+
+# When diskless replication is enabled, it is possible to configure the delay
+# the server waits in order to spawn the child that transfers the RDB via socket
+# to the replicas.
+#
+# This is important since once the transfer starts, it is not possible to serve
+# new replicas arriving, that will be queued for the next RDB transfer, so the
+# server waits a delay in order to let more replicas arrive.
+#
+# The delay is specified in seconds, and by default is 5 seconds. To disable
+# it entirely just set it to 0 seconds and the transfer will start ASAP.
+repl-diskless-sync-delay 5
+
+# When diskless replication is enabled with a delay, it is possible to let
+# the replication start before the maximum delay is reached if the maximum
+# number of replicas expected have connected. Default of 0 means that the
+# maximum is not defined and Redis will wait the full delay.
+repl-diskless-sync-max-replicas 0
+
+# -----------------------------------------------------------------------------
+# WARNING: Since in this setup the replica does not immediately store an RDB on
+# disk, it may cause data loss during failovers. RDB diskless load + Redis
+# modules not handling I/O reads may cause Redis to abort in case of I/O errors
+# during the initial synchronization stage with the master.
+# -----------------------------------------------------------------------------
+#
+# Replica can load the RDB it reads from the replication link directly from the
+# socket, or store the RDB to a file and read that file after it was completely
+# received from the master.
+#
+# In many cases the disk is slower than the network, and storing and loading
+# the RDB file may increase replication time (and even increase the master's
+# Copy on Write memory and replica buffers).
+# However, when parsing the RDB file directly from the socket, in order to avoid
+# data loss it's only safe to flush the current dataset when the new dataset is
+# fully loaded in memory, resulting in higher memory usage.
+# For this reason we have the following options:
+#
+# "disabled" - Don't use diskless load (store the rdb file to the disk first)
+# "swapdb" - Keep current db contents in RAM while parsing the data directly
+# from the socket. Replicas in this mode can keep serving current
+# dataset while replication is in progress, except for cases where
+# they can't recognize master as having a data set from same
+# replication history.
+# Note that this requires sufficient memory, if you don't have it,
+# you risk an OOM kill.
+# "on-empty-db" - Use diskless load only when current dataset is empty. This is
+# safer and avoid having old and new dataset loaded side by side
+# during replication.
+repl-diskless-load disabled
+
+# Master send PINGs to its replicas in a predefined interval. It's possible to
+# change this interval with the repl_ping_replica_period option. The default
+# value is 10 seconds.
+#
+# repl-ping-replica-period 10
+
+# The following option sets the replication timeout for:
+#
+# 1) Bulk transfer I/O during SYNC, from the point of view of replica.
+# 2) Master timeout from the point of view of replicas (data, pings).
+# 3) Replica timeout from the point of view of masters (REPLCONF ACK pings).
+#
+# It is important to make sure that this value is greater than the value
+# specified for repl-ping-replica-period otherwise a timeout will be detected
+# every time there is low traffic between the master and the replica. The default
+# value is 60 seconds.
+#
+# repl-timeout 60
+
+# Disable TCP_NODELAY on the replica socket after SYNC?
+#
+# If you select "yes" Redis will use a smaller number of TCP packets and
+# less bandwidth to send data to replicas. But this can add a delay for
+# the data to appear on the replica side, up to 40 milliseconds with
+# Linux kernels using a default configuration.
+#
+# If you select "no" the delay for data to appear on the replica side will
+# be reduced but more bandwidth will be used for replication.
+#
+# By default we optimize for low latency, but in very high traffic conditions
+# or when the master and replicas are many hops away, turning this to "yes" may
+# be a good idea.
+repl-disable-tcp-nodelay no
+
+# Set the replication backlog size. The backlog is a buffer that accumulates
+# replica data when replicas are disconnected for some time, so that when a
+# replica wants to reconnect again, often a full resync is not needed, but a
+# partial resync is enough, just passing the portion of data the replica
+# missed while disconnected.
+#
+# The bigger the replication backlog, the longer the replica can endure the
+# disconnect and later be able to perform a partial resynchronization.
+#
+# The backlog is only allocated if there is at least one replica connected.
+#
+# repl-backlog-size 1mb
+
+# After a master has no connected replicas for some time, the backlog will be
+# freed. The following option configures the amount of seconds that need to
+# elapse, starting from the time the last replica disconnected, for the backlog
+# buffer to be freed.
+#
+# Note that replicas never free the backlog for timeout, since they may be
+# promoted to masters later, and should be able to correctly "partially
+# resynchronize" with other replicas: hence they should always accumulate backlog.
+#
+# A value of 0 means to never release the backlog.
+#
+# repl-backlog-ttl 3600
+
+# The replica priority is an integer number published by Redis in the INFO
+# output. It is used by Redis Sentinel in order to select a replica to promote
+# into a master if the master is no longer working correctly.
+#
+# A replica with a low priority number is considered better for promotion, so
+# for instance if there are three replicas with priority 10, 100, 25 Sentinel
+# will pick the one with priority 10, that is the lowest.
+#
+# However a special priority of 0 marks the replica as not able to perform the
+# role of master, so a replica with priority of 0 will never be selected by
+# Redis Sentinel for promotion.
+#
+# By default the priority is 100.
+replica-priority 100
+
+# The propagation error behavior controls how Redis will behave when it is
+# unable to handle a command being processed in the replication stream from a master
+# or processed while reading from an AOF file. Errors that occur during propagation
+# are unexpected, and can cause data inconsistency. However, there are edge cases
+# in earlier versions of Redis where it was possible for the server to replicate or persist
+# commands that would fail on future versions. For this reason the default behavior
+# is to ignore such errors and continue processing commands.
+#
+# If an application wants to ensure there is no data divergence, this configuration
+# should be set to 'panic' instead. The value can also be set to 'panic-on-replicas'
+# to only panic when a replica encounters an error on the replication stream. One of
+# these two panic values will become the default value in the future once there are
+# sufficient safety mechanisms in place to prevent false positive crashes.
+#
+# propagation-error-behavior ignore
+
+# Replica ignore disk write errors controls the behavior of a replica when it is
+# unable to persist a write command received from its master to disk. By default,
+# this configuration is set to 'no' and will crash the replica in this condition.
+# It is not recommended to change this default, however in order to be compatible
+# with older versions of Redis this config can be toggled to 'yes' which will just
+# log a warning and execute the write command it got from the master.
+#
+# replica-ignore-disk-write-errors no
+
+# -----------------------------------------------------------------------------
+# By default, Redis Sentinel includes all replicas in its reports. A replica
+# can be excluded from Redis Sentinel's announcements. An unannounced replica
+# will be ignored by the 'sentinel replicas <master>' command and won't be
+# exposed to Redis Sentinel's clients.
+#
+# This option does not change the behavior of replica-priority. Even with
+# replica-announced set to 'no', the replica can be promoted to master. To
+# prevent this behavior, set replica-priority to 0.
+#
+# replica-announced yes
+
+# It is possible for a master to stop accepting writes if there are less than
+# N replicas connected, having a lag less or equal than M seconds.
+#
+# The N replicas need to be in "online" state.
+#
+# The lag in seconds, that must be <= the specified value, is calculated from
+# the last ping received from the replica, that is usually sent every second.
+#
+# This option does not GUARANTEE that N replicas will accept the write, but
+# will limit the window of exposure for lost writes in case not enough replicas
+# are available, to the specified number of seconds.
+#
+# For example to require at least 3 replicas with a lag <= 10 seconds use:
+#
+# min-replicas-to-write 3
+# min-replicas-max-lag 10
+#
+# Setting one or the other to 0 disables the feature.
+#
+# By default min-replicas-to-write is set to 0 (feature disabled) and
+# min-replicas-max-lag is set to 10.
+
+# A Redis master is able to list the address and port of the attached
+# replicas in different ways. For example the "INFO replication" section
+# offers this information, which is used, among other tools, by
+# Redis Sentinel in order to discover replica instances.
+# Another place where this info is available is in the output of the
+# "ROLE" command of a master.
+#
+# The listed IP address and port normally reported by a replica is
+# obtained in the following way:
+#
+# IP: The address is auto detected by checking the peer address
+# of the socket used by the replica to connect with the master.
+#
+# Port: The port is communicated by the replica during the replication
+# handshake, and is normally the port that the replica is using to
+# listen for connections.
+#
+# However when port forwarding or Network Address Translation (NAT) is
+# used, the replica may actually be reachable via different IP and port
+# pairs. The following two options can be used by a replica in order to
+# report to its master a specific set of IP and port, so that both INFO
+# and ROLE will report those values.
+#
+# There is no need to use both the options if you need to override just
+# the port or the IP address.
+#
+# replica-announce-ip 5.5.5.5
+# replica-announce-port 1234
+
+############################### KEYS TRACKING #################################
+
+# Redis implements server assisted support for client side caching of values.
+# This is implemented using an invalidation table that remembers, using
+# a radix key indexed by key name, what clients have which keys. In turn
+# this is used in order to send invalidation messages to clients. Please
+# check this page to understand more about the feature:
+#
+# https://redis.io/topics/client-side-caching
+#
+# When tracking is enabled for a client, all the read only queries are assumed
+# to be cached: this will force Redis to store information in the invalidation
+# table. When keys are modified, such information is flushed away, and
+# invalidation messages are sent to the clients. However if the workload is
+# heavily dominated by reads, Redis could use more and more memory in order
+# to track the keys fetched by many clients.
+#
+# For this reason it is possible to configure a maximum fill value for the
+# invalidation table. By default it is set to 1M of keys, and once this limit
+# is reached, Redis will start to evict keys in the invalidation table
+# even if they were not modified, just to reclaim memory: this will in turn
+# force the clients to invalidate the cached values. Basically the table
+# maximum size is a trade off between the memory you want to spend server
+# side to track information about who cached what, and the ability of clients
+# to retain cached objects in memory.
+#
+# If you set the value to 0, it means there are no limits, and Redis will
+# retain as many keys as needed in the invalidation table.
+# In the "stats" INFO section, you can find information about the number of
+# keys in the invalidation table at every given moment.
+#
+# Note: when key tracking is used in broadcasting mode, no memory is used
+# in the server side so this setting is useless.
+#
+# tracking-table-max-keys 1000000
+
+################################## SECURITY ###################################
+
+# Warning: since Redis is pretty fast, an outside user can try up to
+# 1 million passwords per second against a modern box. This means that you
+# should use very strong passwords, otherwise they will be very easy to break.
+# Note that because the password is really a shared secret between the client
+# and the server, and should not be memorized by any human, the password
+# can be easily a long string from /dev/urandom or whatever, so by using a
+# long and unguessable password no brute force attack will be possible.
+
+# Redis ACL users are defined in the following format:
+#
+# user <username> ... acl rules ...
+#
+# For example:
+#
+# user worker +@list +@connection ~jobs:* on >ffa9203c493aa99
+#
+# The special username "default" is used for new connections. If this user
+# has the "nopass" rule, then new connections will be immediately authenticated
+# as the "default" user without the need of any password provided via the
+# AUTH command. Otherwise if the "default" user is not flagged with "nopass"
+# the connections will start in not authenticated state, and will require
+# AUTH (or the HELLO command AUTH option) in order to be authenticated and
+# start to work.
+#
+# The ACL rules that describe what a user can do are the following:
+#
+# on Enable the user: it is possible to authenticate as this user.
+# off Disable the user: it's no longer possible to authenticate
+# with this user, however the already authenticated connections
+# will still work.
+# skip-sanitize-payload RESTORE dump-payload sanitization is skipped.
+# sanitize-payload RESTORE dump-payload is sanitized (default).
+# +<command> Allow the execution of that command.
+# May be used with `|` for allowing subcommands (e.g "+config|get")
+# -<command> Disallow the execution of that command.
+# May be used with `|` for blocking subcommands (e.g "-config|set")
+# +@<category> Allow the execution of all the commands in such category
+# with valid categories are like @admin, @set, @sortedset, ...
+# and so forth, see the full list in the server.c file where
+# the Redis command table is described and defined.
+# The special category @all means all the commands, but currently
+# present in the server, and that will be loaded in the future
+# via modules.
+# +<command>|first-arg Allow a specific first argument of an otherwise
+# disabled command. It is only supported on commands with
+# no sub-commands, and is not allowed as negative form
+# like -SELECT|1, only additive starting with "+". This
+# feature is deprecated and may be removed in the future.
+# allcommands Alias for +@all. Note that it implies the ability to execute
+# all the future commands loaded via the modules system.
+# nocommands Alias for -@all.
+# ~<pattern> Add a pattern of keys that can be mentioned as part of
+# commands. For instance ~* allows all the keys. The pattern
+# is a glob-style pattern like the one of KEYS.
+# It is possible to specify multiple patterns.
+# %R~<pattern> Add key read pattern that specifies which keys can be read
+# from.
+# %W~<pattern> Add key write pattern that specifies which keys can be
+# written to.
+# allkeys Alias for ~*
+# resetkeys Flush the list of allowed keys patterns.
+# &<pattern> Add a glob-style pattern of Pub/Sub channels that can be
+# accessed by the user. It is possible to specify multiple channel
+# patterns.
+# allchannels Alias for &*
+# resetchannels Flush the list of allowed channel patterns.
+# ><password> Add this password to the list of valid password for the user.
+# For example >mypass will add "mypass" to the list.
+# This directive clears the "nopass" flag (see later).
+# <<password> Remove this password from the list of valid passwords.
+# nopass All the set passwords of the user are removed, and the user
+# is flagged as requiring no password: it means that every
+# password will work against this user. If this directive is
+# used for the default user, every new connection will be
+# immediately authenticated with the default user without
+# any explicit AUTH command required. Note that the "resetpass"
+# directive will clear this condition.
+# resetpass Flush the list of allowed passwords. Moreover removes the
+# "nopass" status. After "resetpass" the user has no associated
+# passwords and there is no way to authenticate without adding
+# some password (or setting it as "nopass" later).
+# reset Performs the following actions: resetpass, resetkeys, resetchannels,
+# allchannels (if acl-pubsub-default is set), off, clearselectors, -@all.
+# The user returns to the same state it has immediately after its creation.
+# (<options>) Create a new selector with the options specified within the
+# parentheses and attach it to the user. Each option should be
+# space separated. The first character must be ( and the last
+# character must be ).
+# clearselectors Remove all of the currently attached selectors.
+# Note this does not change the "root" user permissions,
+# which are the permissions directly applied onto the
+# user (outside the parentheses).
+#
+# ACL rules can be specified in any order: for instance you can start with
+# passwords, then flags, or key patterns. However note that the additive
+# and subtractive rules will CHANGE MEANING depending on the ordering.
+# For instance see the following example:
+#
+# user alice on +@all -DEBUG ~* >somepassword
+#
+# This will allow "alice" to use all the commands with the exception of the
+# DEBUG command, since +@all added all the commands to the set of the commands
+# alice can use, and later DEBUG was removed. However if we invert the order
+# of two ACL rules the result will be different:
+#
+# user alice on -DEBUG +@all ~* >somepassword
+#
+# Now DEBUG was removed when alice had yet no commands in the set of allowed
+# commands, later all the commands are added, so the user will be able to
+# execute everything.
+#
+# Basically ACL rules are processed left-to-right.
+#
+# The following is a list of command categories and their meanings:
+# * keyspace - Writing or reading from keys, databases, or their metadata
+# in a type agnostic way. Includes DEL, RESTORE, DUMP, RENAME, EXISTS, DBSIZE,
+# KEYS, EXPIRE, TTL, FLUSHALL, etc. Commands that may modify the keyspace,
+# key or metadata will also have `write` category. Commands that only read
+# the keyspace, key or metadata will have the `read` category.
+# * read - Reading from keys (values or metadata). Note that commands that don't
+# interact with keys, will not have either `read` or `write`.
+# * write - Writing to keys (values or metadata)
+# * admin - Administrative commands. Normal applications will never need to use
+# these. Includes REPLICAOF, CONFIG, DEBUG, SAVE, MONITOR, ACL, SHUTDOWN, etc.
+# * dangerous - Potentially dangerous (each should be considered with care for
+# various reasons). This includes FLUSHALL, MIGRATE, RESTORE, SORT, KEYS,
+# CLIENT, DEBUG, INFO, CONFIG, SAVE, REPLICAOF, etc.
+# * connection - Commands affecting the connection or other connections.
+# This includes AUTH, SELECT, COMMAND, CLIENT, ECHO, PING, etc.
+# * blocking - Potentially blocking the connection until released by another
+# command.
+# * fast - Fast O(1) commands. May loop on the number of arguments, but not the
+# number of elements in the key.
+# * slow - All commands that are not Fast.
+# * pubsub - PUBLISH / SUBSCRIBE related
+# * transaction - WATCH / MULTI / EXEC related commands.
+# * scripting - Scripting related.
+# * set - Data type: sets related.
+# * sortedset - Data type: zsets related.
+# * list - Data type: lists related.
+# * hash - Data type: hashes related.
+# * string - Data type: strings related.
+# * bitmap - Data type: bitmaps related.
+# * hyperloglog - Data type: hyperloglog related.
+# * geo - Data type: geo related.
+# * stream - Data type: streams related.
+#
+# For more information about ACL configuration please refer to
+# the Redis web site at https://redis.io/topics/acl
+
+# ACL LOG
+#
+# The ACL Log tracks failed commands and authentication events associated
+# with ACLs. The ACL Log is useful to troubleshoot failed commands blocked
+# by ACLs. The ACL Log is stored in memory. You can reclaim memory with
+# ACL LOG RESET. Define the maximum entry length of the ACL Log below.
+acllog-max-len 128
+
+# Using an external ACL file
+#
+# Instead of configuring users here in this file, it is possible to use
+# a stand-alone file just listing users. The two methods cannot be mixed:
+# if you configure users here and at the same time you activate the external
+# ACL file, the server will refuse to start.
+#
+# The format of the external ACL user file is exactly the same as the
+# format that is used inside redis.conf to describe users.
+#
+# aclfile /etc/redis/users.acl
+
+# IMPORTANT NOTE: starting with Redis 6 "requirepass" is just a compatibility
+# layer on top of the new ACL system. The option effect will be just setting
+# the password for the default user. Clients will still authenticate using
+# AUTH <password> as usually, or more explicitly with AUTH default <password>
+# if they follow the new protocol: both will work.
+#
+# The requirepass is not compatible with aclfile option and the ACL LOAD
+# command, these will cause requirepass to be ignored.
+#
+# requirepass foobared
+
+# New users are initialized with restrictive permissions by default, via the
+# equivalent of this ACL rule 'off resetkeys -@all'. Starting with Redis 6.2, it
+# is possible to manage access to Pub/Sub channels with ACL rules as well. The
+# default Pub/Sub channels permission if new users is controlled by the
+# acl-pubsub-default configuration directive, which accepts one of these values:
+#
+# allchannels: grants access to all Pub/Sub channels
+# resetchannels: revokes access to all Pub/Sub channels
+#
+# From Redis 7.0, acl-pubsub-default defaults to 'resetchannels' permission.
+#
+# acl-pubsub-default resetchannels
+
+# Command renaming (DEPRECATED).
+#
+# ------------------------------------------------------------------------
+# WARNING: avoid using this option if possible. Instead use ACLs to remove
+# commands from the default user, and put them only in some admin user you
+# create for administrative purposes.
+# ------------------------------------------------------------------------
+#
+# It is possible to change the name of dangerous commands in a shared
+# environment. For instance the CONFIG command may be renamed into something
+# hard to guess so that it will still be available for internal-use tools
+# but not available for general clients.
+#
+# Example:
+#
+# rename-command CONFIG b840fc02d524045429941cc15f59e41cb7be6c52
+#
+# It is also possible to completely kill a command by renaming it into
+# an empty string:
+#
+# rename-command CONFIG ""
+#
+# Please note that changing the name of commands that are logged into the
+# AOF file or transmitted to replicas may cause problems.
+
+################################### CLIENTS ####################################
+
+# Set the max number of connected clients at the same time. By default
+# this limit is set to 10000 clients, however if the Redis server is not
+# able to configure the process file limit to allow for the specified limit
+# the max number of allowed clients is set to the current file limit
+# minus 32 (as Redis reserves a few file descriptors for internal uses).
+#
+# Once the limit is reached Redis will close all the new connections sending
+# an error 'max number of clients reached'.
+#
+# IMPORTANT: When Redis Cluster is used, the max number of connections is also
+# shared with the cluster bus: every node in the cluster will use two
+# connections, one incoming and another outgoing. It is important to size the
+# limit accordingly in case of very large clusters.
+#
+# maxclients 10000
+
+############################## MEMORY MANAGEMENT ################################
+
+# Set a memory usage limit to the specified amount of bytes.
+# When the memory limit is reached Redis will try to remove keys
+# according to the eviction policy selected (see maxmemory-policy).
+#
+# If Redis can't remove keys according to the policy, or if the policy is
+# set to 'noeviction', Redis will start to reply with errors to commands
+# that would use more memory, like SET, LPUSH, and so on, and will continue
+# to reply to read-only commands like GET.
+#
+# This option is usually useful when using Redis as an LRU or LFU cache, or to
+# set a hard memory limit for an instance (using the 'noeviction' policy).
+#
+# WARNING: If you have replicas attached to an instance with maxmemory on,
+# the size of the output buffers needed to feed the replicas are subtracted
+# from the used memory count, so that network problems / resyncs will
+# not trigger a loop where keys are evicted, and in turn the output
+# buffer of replicas is full with DELs of keys evicted triggering the deletion
+# of more keys, and so forth until the database is completely emptied.
+#
+# In short... if you have replicas attached it is suggested that you set a lower
+# limit for maxmemory so that there is some free RAM on the system for replica
+# output buffers (but this is not needed if the policy is 'noeviction').
+#
+# maxmemory <bytes>
+
+# MAXMEMORY POLICY: how Redis will select what to remove when maxmemory
+# is reached. You can select one from the following behaviors:
+#
+# volatile-lru -> Evict using approximated LRU, only keys with an expire set.
+# allkeys-lru -> Evict any key using approximated LRU.
+# volatile-lfu -> Evict using approximated LFU, only keys with an expire set.
+# allkeys-lfu -> Evict any key using approximated LFU.
+# volatile-random -> Remove a random key having an expire set.
+# allkeys-random -> Remove a random key, any key.
+# volatile-ttl -> Remove the key with the nearest expire time (minor TTL)
+# noeviction -> Don't evict anything, just return an error on write operations.
+#
+# LRU means Least Recently Used
+# LFU means Least Frequently Used
+#
+# Both LRU, LFU and volatile-ttl are implemented using approximated
+# randomized algorithms.
+#
+# Note: with any of the above policies, when there are no suitable keys for
+# eviction, Redis will return an error on write operations that require
+# more memory. These are usually commands that create new keys, add data or
+# modify existing keys. A few examples are: SET, INCR, HSET, LPUSH, SUNIONSTORE,
+# SORT (due to the STORE argument), and EXEC (if the transaction includes any
+# command that requires memory).
+#
+# The default is:
+#
+# maxmemory-policy noeviction
+
+# LRU, LFU and minimal TTL algorithms are not precise algorithms but approximated
+# algorithms (in order to save memory), so you can tune it for speed or
+# accuracy. By default Redis will check five keys and pick the one that was
+# used least recently, you can change the sample size using the following
+# configuration directive.
+#
+# The default of 5 produces good enough results. 10 Approximates very closely
+# true LRU but costs more CPU. 3 is faster but not very accurate.
+#
+# maxmemory-samples 5
+
+# Eviction processing is designed to function well with the default setting.
+# If there is an unusually large amount of write traffic, this value may need to
+# be increased. Decreasing this value may reduce latency at the risk of
+# eviction processing effectiveness
+# 0 = minimum latency, 10 = default, 100 = process without regard to latency
+#
+# maxmemory-eviction-tenacity 10
+
+# Starting from Redis 5, by default a replica will ignore its maxmemory setting
+# (unless it is promoted to master after a failover or manually). It means
+# that the eviction of keys will be just handled by the master, sending the
+# DEL commands to the replica as keys evict in the master side.
+#
+# This behavior ensures that masters and replicas stay consistent, and is usually
+# what you want, however if your replica is writable, or you want the replica
+# to have a different memory setting, and you are sure all the writes performed
+# to the replica are idempotent, then you may change this default (but be sure
+# to understand what you are doing).
+#
+# Note that since the replica by default does not evict, it may end using more
+# memory than the one set via maxmemory (there are certain buffers that may
+# be larger on the replica, or data structures may sometimes take more memory
+# and so forth). So make sure you monitor your replicas and make sure they
+# have enough memory to never hit a real out-of-memory condition before the
+# master hits the configured maxmemory setting.
+#
+# replica-ignore-maxmemory yes
+
+# Redis reclaims expired keys in two ways: upon access when those keys are
+# found to be expired, and also in background, in what is called the
+# "active expire key". The key space is slowly and interactively scanned
+# looking for expired keys to reclaim, so that it is possible to free memory
+# of keys that are expired and will never be accessed again in a short time.
+#
+# The default effort of the expire cycle will try to avoid having more than
+# ten percent of expired keys still in memory, and will try to avoid consuming
+# more than 25% of total memory and to add latency to the system. However
+# it is possible to increase the expire "effort" that is normally set to
+# "1", to a greater value, up to the value "10". At its maximum value the
+# system will use more CPU, longer cycles (and technically may introduce
+# more latency), and will tolerate less already expired keys still present
+# in the system. It's a tradeoff between memory, CPU and latency.
+#
+# active-expire-effort 1
+
+############################# LAZY FREEING ####################################
+
+# Redis has two primitives to delete keys. One is called DEL and is a blocking
+# deletion of the object. It means that the server stops processing new commands
+# in order to reclaim all the memory associated with an object in a synchronous
+# way. If the key deleted is associated with a small object, the time needed
+# in order to execute the DEL command is very small and comparable to most other
+# O(1) or O(log_N) commands in Redis. However if the key is associated with an
+# aggregated value containing millions of elements, the server can block for
+# a long time (even seconds) in order to complete the operation.
+#
+# For the above reasons Redis also offers non blocking deletion primitives
+# such as UNLINK (non blocking DEL) and the ASYNC option of FLUSHALL and
+# FLUSHDB commands, in order to reclaim memory in background. Those commands
+# are executed in constant time. Another thread will incrementally free the
+# object in the background as fast as possible.
+#
+# DEL, UNLINK and ASYNC option of FLUSHALL and FLUSHDB are user-controlled.
+# It's up to the design of the application to understand when it is a good
+# idea to use one or the other. However the Redis server sometimes has to
+# delete keys or flush the whole database as a side effect of other operations.
+# Specifically Redis deletes objects independently of a user call in the
+# following scenarios:
+#
+# 1) On eviction, because of the maxmemory and maxmemory policy configurations,
+# in order to make room for new data, without going over the specified
+# memory limit.
+# 2) Because of expire: when a key with an associated time to live (see the
+# EXPIRE command) must be deleted from memory.
+# 3) Because of a side effect of a command that stores data on a key that may
+# already exist. For example the RENAME command may delete the old key
+# content when it is replaced with another one. Similarly SUNIONSTORE
+# or SORT with STORE option may delete existing keys. The SET command
+# itself removes any old content of the specified key in order to replace
+# it with the specified string.
+# 4) During replication, when a replica performs a full resynchronization with
+# its master, the content of the whole database is removed in order to
+# load the RDB file just transferred.
+#
+# In all the above cases the default is to delete objects in a blocking way,
+# like if DEL was called. However you can configure each case specifically
+# in order to instead release memory in a non-blocking way like if UNLINK
+# was called, using the following configuration directives.
+
+lazyfree-lazy-eviction no
+lazyfree-lazy-expire no
+lazyfree-lazy-server-del no
+replica-lazy-flush no
+
+# It is also possible, for the case when to replace the user code DEL calls
+# with UNLINK calls is not easy, to modify the default behavior of the DEL
+# command to act exactly like UNLINK, using the following configuration
+# directive:
+
+lazyfree-lazy-user-del no
+
+# FLUSHDB, FLUSHALL, SCRIPT FLUSH and FUNCTION FLUSH support both asynchronous and synchronous
+# deletion, which can be controlled by passing the [SYNC|ASYNC] flags into the
+# commands. When neither flag is passed, this directive will be used to determine
+# if the data should be deleted asynchronously.
+
+lazyfree-lazy-user-flush no
+
+################################ THREADED I/O #################################
+
+# Redis is mostly single threaded, however there are certain threaded
+# operations such as UNLINK, slow I/O accesses and other things that are
+# performed on side threads.
+#
+# Now it is also possible to handle Redis clients socket reads and writes
+# in different I/O threads. Since especially writing is so slow, normally
+# Redis users use pipelining in order to speed up the Redis performances per
+# core, and spawn multiple instances in order to scale more. Using I/O
+# threads it is possible to easily speedup two times Redis without resorting
+# to pipelining nor sharding of the instance.
+#
+# By default threading is disabled, we suggest enabling it only in machines
+# that have at least 4 or more cores, leaving at least one spare core.
+# Using more than 8 threads is unlikely to help much. We also recommend using
+# threaded I/O only if you actually have performance problems, with Redis
+# instances being able to use a quite big percentage of CPU time, otherwise
+# there is no point in using this feature.
+#
+# So for instance if you have a four cores boxes, try to use 2 or 3 I/O
+# threads, if you have a 8 cores, try to use 6 threads. In order to
+# enable I/O threads use the following configuration directive:
+#
+# io-threads 4
+#
+# Setting io-threads to 1 will just use the main thread as usual.
+# When I/O threads are enabled, we only use threads for writes, that is
+# to thread the write(2) syscall and transfer the client buffers to the
+# socket. However it is also possible to enable threading of reads and
+# protocol parsing using the following configuration directive, by setting
+# it to yes:
+#
+# io-threads-do-reads no
+#
+# Usually threading reads doesn't help much.
+#
+# NOTE 1: This configuration directive cannot be changed at runtime via
+# CONFIG SET. Also, this feature currently does not work when SSL is
+# enabled.
+#
+# NOTE 2: If you want to test the Redis speedup using redis-benchmark, make
+# sure you also run the benchmark itself in threaded mode, using the
+# --threads option to match the number of Redis threads, otherwise you'll not
+# be able to notice the improvements.
+
+############################ KERNEL OOM CONTROL ##############################
+
+# On Linux, it is possible to hint the kernel OOM killer on what processes
+# should be killed first when out of memory.
+#
+# Enabling this feature makes Redis actively control the oom_score_adj value
+# for all its processes, depending on their role. The default scores will
+# attempt to have background child processes killed before all others, and
+# replicas killed before masters.
+#
+# Redis supports these options:
+#
+# no: Don't make changes to oom-score-adj (default).
+# yes: Alias to "relative" see below.
+# absolute: Values in oom-score-adj-values are written as is to the kernel.
+# relative: Values are used relative to the initial value of oom_score_adj when
+# the server starts and are then clamped to a range of -1000 to 1000.
+# Because typically the initial value is 0, they will often match the
+# absolute values.
+oom-score-adj no
+
+# When oom-score-adj is used, this directive controls the specific values used
+# for master, replica and background child processes. Values range -2000 to
+# 2000 (higher means more likely to be killed).
+#
+# Unprivileged processes (not root, and without CAP_SYS_RESOURCE capabilities)
+# can freely increase their value, but not decrease it below its initial
+# settings. This means that setting oom-score-adj to "relative" and setting the
+# oom-score-adj-values to positive values will always succeed.
+oom-score-adj-values 0 200 800
+
+
+#################### KERNEL transparent hugepage CONTROL ######################
+
+# Usually the kernel Transparent Huge Pages control is set to "madvise" or
+# or "never" by default (/sys/kernel/mm/transparent_hugepage/enabled), in which
+# case this config has no effect. On systems in which it is set to "always",
+# redis will attempt to disable it specifically for the redis process in order
+# to avoid latency problems specifically with fork(2) and CoW.
+# If for some reason you prefer to keep it enabled, you can set this config to
+# "no" and the kernel global to "always".
+
+disable-thp yes
+
+############################## APPEND ONLY MODE ###############################
+
+# By default Redis asynchronously dumps the dataset on disk. This mode is
+# good enough in many applications, but an issue with the Redis process or
+# a power outage may result into a few minutes of writes lost (depending on
+# the configured save points).
+#
+# The Append Only File is an alternative persistence mode that provides
+# much better durability. For instance using the default data fsync policy
+# (see later in the config file) Redis can lose just one second of writes in a
+# dramatic event like a server power outage, or a single write if something
+# wrong with the Redis process itself happens, but the operating system is
+# still running correctly.
+#
+# AOF and RDB persistence can be enabled at the same time without problems.
+# If the AOF is enabled on startup Redis will load the AOF, that is the file
+# with the better durability guarantees.
+#
+# Please check https://redis.io/topics/persistence for more information.
+
+appendonly no
+
+# The base name of the append only file.
+#
+# Redis 7 and newer use a set of append-only files to persist the dataset
+# and changes applied to it. There are two basic types of files in use:
+#
+# - Base files, which are a snapshot representing the complete state of the
+# dataset at the time the file was created. Base files can be either in
+# the form of RDB (binary serialized) or AOF (textual commands).
+# - Incremental files, which contain additional commands that were applied
+# to the dataset following the previous file.
+#
+# In addition, manifest files are used to track the files and the order in
+# which they were created and should be applied.
+#
+# Append-only file names are created by Redis following a specific pattern.
+# The file name's prefix is based on the 'appendfilename' configuration
+# parameter, followed by additional information about the sequence and type.
+#
+# For example, if appendfilename is set to appendonly.aof, the following file
+# names could be derived:
+#
+# - appendonly.aof.1.base.rdb as a base file.
+# - appendonly.aof.1.incr.aof, appendonly.aof.2.incr.aof as incremental files.
+# - appendonly.aof.manifest as a manifest file.
+
+appendfilename "appendonly.aof"
+
+# For convenience, Redis stores all persistent append-only files in a dedicated
+# directory. The name of the directory is determined by the appenddirname
+# configuration parameter.
+
+appenddirname "appendonlydir"
+
+# The fsync() call tells the Operating System to actually write data on disk
+# instead of waiting for more data in the output buffer. Some OS will really flush
+# data on disk, some other OS will just try to do it ASAP.
+#
+# Redis supports three different modes:
+#
+# no: don't fsync, just let the OS flush the data when it wants. Faster.
+# always: fsync after every write to the append only log. Slow, Safest.
+# everysec: fsync only one time every second. Compromise.
+#
+# The default is "everysec", as that's usually the right compromise between
+# speed and data safety. It's up to you to understand if you can relax this to
+# "no" that will let the operating system flush the output buffer when
+# it wants, for better performances (but if you can live with the idea of
+# some data loss consider the default persistence mode that's snapshotting),
+# or on the contrary, use "always" that's very slow but a bit safer than
+# everysec.
+#
+# More details please check the following article:
+# http://antirez.com/post/redis-persistence-demystified.html
+#
+# If unsure, use "everysec".
+
+# appendfsync always
+appendfsync everysec
+# appendfsync no
+
+# When the AOF fsync policy is set to always or everysec, and a background
+# saving process (a background save or AOF log background rewriting) is
+# performing a lot of I/O against the disk, in some Linux configurations
+# Redis may block too long on the fsync() call. Note that there is no fix for
+# this currently, as even performing fsync in a different thread will block
+# our synchronous write(2) call.
+#
+# In order to mitigate this problem it's possible to use the following option
+# that will prevent fsync() from being called in the main process while a
+# BGSAVE or BGREWRITEAOF is in progress.
+#
+# This means that while another child is saving, the durability of Redis is
+# the same as "appendfsync no". In practical terms, this means that it is
+# possible to lose up to 30 seconds of log in the worst scenario (with the
+# default Linux settings).
+#
+# If you have latency problems turn this to "yes". Otherwise leave it as
+# "no" that is the safest pick from the point of view of durability.
+
+no-appendfsync-on-rewrite no
+
+# Automatic rewrite of the append only file.
+# Redis is able to automatically rewrite the log file implicitly calling
+# BGREWRITEAOF when the AOF log size grows by the specified percentage.
+#
+# This is how it works: Redis remembers the size of the AOF file after the
+# latest rewrite (if no rewrite has happened since the restart, the size of
+# the AOF at startup is used).
+#
+# This base size is compared to the current size. If the current size is
+# bigger than the specified percentage, the rewrite is triggered. Also
+# you need to specify a minimal size for the AOF file to be rewritten, this
+# is useful to avoid rewriting the AOF file even if the percentage increase
+# is reached but it is still pretty small.
+#
+# Specify a percentage of zero in order to disable the automatic AOF
+# rewrite feature.
+
+auto-aof-rewrite-percentage 100
+auto-aof-rewrite-min-size 64mb
+
+# An AOF file may be found to be truncated at the end during the Redis
+# startup process, when the AOF data gets loaded back into memory.
+# This may happen when the system where Redis is running
+# crashes, especially when an ext4 filesystem is mounted without the
+# data=ordered option (however this can't happen when Redis itself
+# crashes or aborts but the operating system still works correctly).
+#
+# Redis can either exit with an error when this happens, or load as much
+# data as possible (the default now) and start if the AOF file is found
+# to be truncated at the end. The following option controls this behavior.
+#
+# If aof-load-truncated is set to yes, a truncated AOF file is loaded and
+# the Redis server starts emitting a log to inform the user of the event.
+# Otherwise if the option is set to no, the server aborts with an error
+# and refuses to start. When the option is set to no, the user requires
+# to fix the AOF file using the "redis-check-aof" utility before to restart
+# the server.
+#
+# Note that if the AOF file will be found to be corrupted in the middle
+# the server will still exit with an error. This option only applies when
+# Redis will try to read more data from the AOF file but not enough bytes
+# will be found.
+aof-load-truncated yes
+
+# Redis can create append-only base files in either RDB or AOF formats. Using
+# the RDB format is always faster and more efficient, and disabling it is only
+# supported for backward compatibility purposes.
+aof-use-rdb-preamble yes
+
+# Redis supports recording timestamp annotations in the AOF to support restoring
+# the data from a specific point-in-time. However, using this capability changes
+# the AOF format in a way that may not be compatible with existing AOF parsers.
+aof-timestamp-enabled no
+
+################################ SHUTDOWN #####################################
+
+# Maximum time to wait for replicas when shutting down, in seconds.
+#
+# During shut down, a grace period allows any lagging replicas to catch up with
+# the latest replication offset before the master exists. This period can
+# prevent data loss, especially for deployments without configured disk backups.
+#
+# The 'shutdown-timeout' value is the grace period's duration in seconds. It is
+# only applicable when the instance has replicas. To disable the feature, set
+# the value to 0.
+#
+# shutdown-timeout 10
+
+# When Redis receives a SIGINT or SIGTERM, shutdown is initiated and by default
+# an RDB snapshot is written to disk in a blocking operation if save points are configured.
+# The options used on signaled shutdown can include the following values:
+# default: Saves RDB snapshot only if save points are configured.
+# Waits for lagging replicas to catch up.
+# save: Forces a DB saving operation even if no save points are configured.
+# nosave: Prevents DB saving operation even if one or more save points are configured.
+# now: Skips waiting for lagging replicas.
+# force: Ignores any errors that would normally prevent the server from exiting.
+#
+# Any combination of values is allowed as long as "save" and "nosave" are not set simultaneously.
+# Example: "nosave force now"
+#
+# shutdown-on-sigint default
+# shutdown-on-sigterm default
+
+################ NON-DETERMINISTIC LONG BLOCKING COMMANDS #####################
+
+# Maximum time in milliseconds for EVAL scripts, functions and in some cases
+# modules' commands before Redis can start processing or rejecting other clients.
+#
+# If the maximum execution time is reached Redis will start to reply to most
+# commands with a BUSY error.
+#
+# In this state Redis will only allow a handful of commands to be executed.
+# For instance, SCRIPT KILL, FUNCTION KILL, SHUTDOWN NOSAVE and possibly some
+# module specific 'allow-busy' commands.
+#
+# SCRIPT KILL and FUNCTION KILL will only be able to stop a script that did not
+# yet call any write commands, so SHUTDOWN NOSAVE may be the only way to stop
+# the server in the case a write command was already issued by the script when
+# the user doesn't want to wait for the natural termination of the script.
+#
+# The default is 5 seconds. It is possible to set it to 0 or a negative value
+# to disable this mechanism (uninterrupted execution). Note that in the past
+# this config had a different name, which is now an alias, so both of these do
+# the same:
+# lua-time-limit 5000
+# busy-reply-threshold 5000
+
+################################ REDIS CLUSTER ###############################
+
+# Normal Redis instances can't be part of a Redis Cluster; only nodes that are
+# started as cluster nodes can. In order to start a Redis instance as a
+# cluster node enable the cluster support uncommenting the following:
+#
+# cluster-enabled yes
+
+# Every cluster node has a cluster configuration file. This file is not
+# intended to be edited by hand. It is created and updated by Redis nodes.
+# Every Redis Cluster node requires a different cluster configuration file.
+# Make sure that instances running in the same system do not have
+# overlapping cluster configuration file names.
+#
+# cluster-config-file nodes-6379.conf
+
+# Cluster node timeout is the amount of milliseconds a node must be unreachable
+# for it to be considered in failure state.
+# Most other internal time limits are a multiple of the node timeout.
+#
+# cluster-node-timeout 15000
+
+# The cluster port is the port that the cluster bus will listen for inbound connections on. When set
+# to the default value, 0, it will be bound to the command port + 10000. Setting this value requires
+# you to specify the cluster bus port when executing cluster meet.
+# cluster-port 0
+
+# A replica of a failing master will avoid to start a failover if its data
+# looks too old.
+#
+# There is no simple way for a replica to actually have an exact measure of
+# its "data age", so the following two checks are performed:
+#
+# 1) If there are multiple replicas able to failover, they exchange messages
+# in order to try to give an advantage to the replica with the best
+# replication offset (more data from the master processed).
+# Replicas will try to get their rank by offset, and apply to the start
+# of the failover a delay proportional to their rank.
+#
+# 2) Every single replica computes the time of the last interaction with
+# its master. This can be the last ping or command received (if the master
+# is still in the "connected" state), or the time that elapsed since the
+# disconnection with the master (if the replication link is currently down).
+# If the last interaction is too old, the replica will not try to failover
+# at all.
+#
+# The point "2" can be tuned by user. Specifically a replica will not perform
+# the failover if, since the last interaction with the master, the time
+# elapsed is greater than:
+#
+# (node-timeout * cluster-replica-validity-factor) + repl-ping-replica-period
+#
+# So for example if node-timeout is 30 seconds, and the cluster-replica-validity-factor
+# is 10, and assuming a default repl-ping-replica-period of 10 seconds, the
+# replica will not try to failover if it was not able to talk with the master
+# for longer than 310 seconds.
+#
+# A large cluster-replica-validity-factor may allow replicas with too old data to failover
+# a master, while a too small value may prevent the cluster from being able to
+# elect a replica at all.
+#
+# For maximum availability, it is possible to set the cluster-replica-validity-factor
+# to a value of 0, which means, that replicas will always try to failover the
+# master regardless of the last time they interacted with the master.
+# (However they'll always try to apply a delay proportional to their
+# offset rank).
+#
+# Zero is the only value able to guarantee that when all the partitions heal
+# the cluster will always be able to continue.
+#
+# cluster-replica-validity-factor 10
+
+# Cluster replicas are able to migrate to orphaned masters, that are masters
+# that are left without working replicas. This improves the cluster ability
+# to resist to failures as otherwise an orphaned master can't be failed over
+# in case of failure if it has no working replicas.
+#
+# Replicas migrate to orphaned masters only if there are still at least a
+# given number of other working replicas for their old master. This number
+# is the "migration barrier". A migration barrier of 1 means that a replica
+# will migrate only if there is at least 1 other working replica for its master
+# and so forth. It usually reflects the number of replicas you want for every
+# master in your cluster.
+#
+# Default is 1 (replicas migrate only if their masters remain with at least
+# one replica). To disable migration just set it to a very large value or
+# set cluster-allow-replica-migration to 'no'.
+# A value of 0 can be set but is useful only for debugging and dangerous
+# in production.
+#
+# cluster-migration-barrier 1
+
+# Turning off this option allows to use less automatic cluster configuration.
+# It both disables migration to orphaned masters and migration from masters
+# that became empty.
+#
+# Default is 'yes' (allow automatic migrations).
+#
+# cluster-allow-replica-migration yes
+
+# By default Redis Cluster nodes stop accepting queries if they detect there
+# is at least a hash slot uncovered (no available node is serving it).
+# This way if the cluster is partially down (for example a range of hash slots
+# are no longer covered) all the cluster becomes, eventually, unavailable.
+# It automatically returns available as soon as all the slots are covered again.
+#
+# However sometimes you want the subset of the cluster which is working,
+# to continue to accept queries for the part of the key space that is still
+# covered. In order to do so, just set the cluster-require-full-coverage
+# option to no.
+#
+# cluster-require-full-coverage yes
+
+# This option, when set to yes, prevents replicas from trying to failover its
+# master during master failures. However the replica can still perform a
+# manual failover, if forced to do so.
+#
+# This is useful in different scenarios, especially in the case of multiple
+# data center operations, where we want one side to never be promoted if not
+# in the case of a total DC failure.
+#
+# cluster-replica-no-failover no
+
+# This option, when set to yes, allows nodes to serve read traffic while the
+# cluster is in a down state, as long as it believes it owns the slots.
+#
+# This is useful for two cases. The first case is for when an application
+# doesn't require consistency of data during node failures or network partitions.
+# One example of this is a cache, where as long as the node has the data it
+# should be able to serve it.
+#
+# The second use case is for configurations that don't meet the recommended
+# three shards but want to enable cluster mode and scale later. A
+# master outage in a 1 or 2 shard configuration causes a read/write outage to the
+# entire cluster without this option set, with it set there is only a write outage.
+# Without a quorum of masters, slot ownership will not change automatically.
+#
+# cluster-allow-reads-when-down no
+
+# This option, when set to yes, allows nodes to serve pubsub shard traffic while
+# the cluster is in a down state, as long as it believes it owns the slots.
+#
+# This is useful if the application would like to use the pubsub feature even when
+# the cluster global stable state is not OK. If the application wants to make sure only
+# one shard is serving a given channel, this feature should be kept as yes.
+#
+# cluster-allow-pubsubshard-when-down yes
+
+# Cluster link send buffer limit is the limit on the memory usage of an individual
+# cluster bus link's send buffer in bytes. Cluster links would be freed if they exceed
+# this limit. This is to primarily prevent send buffers from growing unbounded on links
+# toward slow peers (E.g. PubSub messages being piled up).
+# This limit is disabled by default. Enable this limit when 'mem_cluster_links' INFO field
+# and/or 'send-buffer-allocated' entries in the 'CLUSTER LINKS` command output continuously increase.
+# Minimum limit of 1gb is recommended so that cluster link buffer can fit in at least a single
+# PubSub message by default. (client-query-buffer-limit default value is 1gb)
+#
+# cluster-link-sendbuf-limit 0
+
+# Clusters can configure their announced hostname using this config. This is a common use case for
+# applications that need to use TLS Server Name Indication (SNI) or dealing with DNS based
+# routing. By default this value is only shown as additional metadata in the CLUSTER SLOTS
+# command, but can be changed using 'cluster-preferred-endpoint-type' config. This value is
+# communicated along the clusterbus to all nodes, setting it to an empty string will remove
+# the hostname and also propagate the removal.
+#
+# cluster-announce-hostname ""
+
+# Clusters can configure an optional nodename to be used in addition to the node ID for
+# debugging and admin information. This name is broadcasted between nodes, so will be used
+# in addition to the node ID when reporting cross node events such as node failures.
+# cluster-announce-human-nodename ""
+
+# Clusters can advertise how clients should connect to them using either their IP address,
+# a user defined hostname, or by declaring they have no endpoint. Which endpoint is
+# shown as the preferred endpoint is set by using the cluster-preferred-endpoint-type
+# config with values 'ip', 'hostname', or 'unknown-endpoint'. This value controls how
+# the endpoint returned for MOVED/ASKING requests as well as the first field of CLUSTER SLOTS.
+# If the preferred endpoint type is set to hostname, but no announced hostname is set, a '?'
+# will be returned instead.
+#
+# When a cluster advertises itself as having an unknown endpoint, it's indicating that
+# the server doesn't know how clients can reach the cluster. This can happen in certain
+# networking situations where there are multiple possible routes to the node, and the
+# server doesn't know which one the client took. In this case, the server is expecting
+# the client to reach out on the same endpoint it used for making the last request, but use
+# the port provided in the response.
+#
+# cluster-preferred-endpoint-type ip
+
+# In order to setup your cluster make sure to read the documentation
+# available at https://redis.io web site.
+
+########################## CLUSTER DOCKER/NAT support ########################
+
+# In certain deployments, Redis Cluster nodes address discovery fails, because
+# addresses are NAT-ted or because ports are forwarded (the typical case is
+# Docker and other containers).
+#
+# In order to make Redis Cluster working in such environments, a static
+# configuration where each node knows its public address is needed. The
+# following four options are used for this scope, and are:
+#
+# * cluster-announce-ip
+# * cluster-announce-port
+# * cluster-announce-tls-port
+# * cluster-announce-bus-port
+#
+# Each instructs the node about its address, client ports (for connections
+# without and with TLS) and cluster message bus port. The information is then
+# published in the header of the bus packets so that other nodes will be able to
+# correctly map the address of the node publishing the information.
+#
+# If tls-cluster is set to yes and cluster-announce-tls-port is omitted or set
+# to zero, then cluster-announce-port refers to the TLS port. Note also that
+# cluster-announce-tls-port has no effect if tls-cluster is set to no.
+#
+# If the above options are not used, the normal Redis Cluster auto-detection
+# will be used instead.
+#
+# Note that when remapped, the bus port may not be at the fixed offset of
+# clients port + 10000, so you can specify any port and bus-port depending
+# on how they get remapped. If the bus-port is not set, a fixed offset of
+# 10000 will be used as usual.
+#
+# Example:
+#
+# cluster-announce-ip 10.1.1.5
+# cluster-announce-tls-port 6379
+# cluster-announce-port 0
+# cluster-announce-bus-port 6380
+
+################################## SLOW LOG ###################################
+
+# The Redis Slow Log is a system to log queries that exceeded a specified
+# execution time. The execution time does not include the I/O operations
+# like talking with the client, sending the reply and so forth,
+# but just the time needed to actually execute the command (this is the only
+# stage of command execution where the thread is blocked and can not serve
+# other requests in the meantime).
+#
+# You can configure the slow log with two parameters: one tells Redis
+# what is the execution time, in microseconds, to exceed in order for the
+# command to get logged, and the other parameter is the length of the
+# slow log. When a new command is logged the oldest one is removed from the
+# queue of logged commands.
+
+# The following time is expressed in microseconds, so 1000000 is equivalent
+# to one second. Note that a negative number disables the slow log, while
+# a value of zero forces the logging of every command.
+slowlog-log-slower-than 10000
+
+# There is no limit to this length. Just be aware that it will consume memory.
+# You can reclaim memory used by the slow log with SLOWLOG RESET.
+slowlog-max-len 128
+
+################################ LATENCY MONITOR ##############################
+
+# The Redis latency monitoring subsystem samples different operations
+# at runtime in order to collect data related to possible sources of
+# latency of a Redis instance.
+#
+# Via the LATENCY command this information is available to the user that can
+# print graphs and obtain reports.
+#
+# The system only logs operations that were performed in a time equal or
+# greater than the amount of milliseconds specified via the
+# latency-monitor-threshold configuration directive. When its value is set
+# to zero, the latency monitor is turned off.
+#
+# By default latency monitoring is disabled since it is mostly not needed
+# if you don't have latency issues, and collecting data has a performance
+# impact, that while very small, can be measured under big load. Latency
+# monitoring can easily be enabled at runtime using the command
+# "CONFIG SET latency-monitor-threshold <milliseconds>" if needed.
+latency-monitor-threshold 0
+
+################################ LATENCY TRACKING ##############################
+
+# The Redis extended latency monitoring tracks the per command latencies and enables
+# exporting the percentile distribution via the INFO latencystats command,
+# and cumulative latency distributions (histograms) via the LATENCY command.
+#
+# By default, the extended latency monitoring is enabled since the overhead
+# of keeping track of the command latency is very small.
+# latency-tracking yes
+
+# By default the exported latency percentiles via the INFO latencystats command
+# are the p50, p99, and p999.
+# latency-tracking-info-percentiles 50 99 99.9
+
+############################# EVENT NOTIFICATION ##############################
+
+# Redis can notify Pub/Sub clients about events happening in the key space.
+# This feature is documented at https://redis.io/topics/notifications
+#
+# For instance if keyspace events notification is enabled, and a client
+# performs a DEL operation on key "foo" stored in the Database 0, two
+# messages will be published via Pub/Sub:
+#
+# PUBLISH __keyspace@0__:foo del
+# PUBLISH __keyevent@0__:del foo
+#
+# It is possible to select the events that Redis will notify among a set
+# of classes. Every class is identified by a single character:
+#
+# K Keyspace events, published with __keyspace@<db>__ prefix.
+# E Keyevent events, published with __keyevent@<db>__ prefix.
+# g Generic commands (non-type specific) like DEL, EXPIRE, RENAME, ...
+# $ String commands
+# l List commands
+# s Set commands
+# h Hash commands
+# z Sorted set commands
+# x Expired events (events generated every time a key expires)
+# e Evicted events (events generated when a key is evicted for maxmemory)
+# n New key events (Note: not included in the 'A' class)
+# t Stream commands
+# d Module key type events
+# m Key-miss events (Note: It is not included in the 'A' class)
+# A Alias for g$lshzxetd, so that the "AKE" string means all the events
+# (Except key-miss events which are excluded from 'A' due to their
+# unique nature).
+#
+# The "notify-keyspace-events" takes as argument a string that is composed
+# of zero or multiple characters. The empty string means that notifications
+# are disabled.
+#
+# Example: to enable list and generic events, from the point of view of the
+# event name, use:
+#
+# notify-keyspace-events Elg
+#
+# Example 2: to get the stream of the expired keys subscribing to channel
+# name __keyevent@0__:expired use:
+#
+# notify-keyspace-events Ex
+#
+# By default all notifications are disabled because most users don't need
+# this feature and the feature has some overhead. Note that if you don't
+# specify at least one of K or E, no events will be delivered.
+notify-keyspace-events ""
+
+############################### ADVANCED CONFIG ###############################
+
+# Hashes are encoded using a memory efficient data structure when they have a
+# small number of entries, and the biggest entry does not exceed a given
+# threshold. These thresholds can be configured using the following directives.
+hash-max-listpack-entries 512
+hash-max-listpack-value 64
+
+# Lists are also encoded in a special way to save a lot of space.
+# The number of entries allowed per internal list node can be specified
+# as a fixed maximum size or a maximum number of elements.
+# For a fixed maximum size, use -5 through -1, meaning:
+# -5: max size: 64 Kb <-- not recommended for normal workloads
+# -4: max size: 32 Kb <-- not recommended
+# -3: max size: 16 Kb <-- probably not recommended
+# -2: max size: 8 Kb <-- good
+# -1: max size: 4 Kb <-- good
+# Positive numbers mean store up to _exactly_ that number of elements
+# per list node.
+# The highest performing option is usually -2 (8 Kb size) or -1 (4 Kb size),
+# but if your use case is unique, adjust the settings as necessary.
+list-max-listpack-size -2
+
+# Lists may also be compressed.
+# Compress depth is the number of quicklist ziplist nodes from *each* side of
+# the list to *exclude* from compression. The head and tail of the list
+# are always uncompressed for fast push/pop operations. Settings are:
+# 0: disable all list compression
+# 1: depth 1 means "don't start compressing until after 1 node into the list,
+# going from either the head or tail"
+# So: [head]->node->node->...->node->[tail]
+# [head], [tail] will always be uncompressed; inner nodes will compress.
+# 2: [head]->[next]->node->node->...->node->[prev]->[tail]
+# 2 here means: don't compress head or head->next or tail->prev or tail,
+# but compress all nodes between them.
+# 3: [head]->[next]->[next]->node->node->...->node->[prev]->[prev]->[tail]
+# etc.
+list-compress-depth 0
+
+# Sets have a special encoding when a set is composed
+# of just strings that happen to be integers in radix 10 in the range
+# of 64 bit signed integers.
+# The following configuration setting sets the limit in the size of the
+# set in order to use this special memory saving encoding.
+set-max-intset-entries 512
+
+# Sets containing non-integer values are also encoded using a memory efficient
+# data structure when they have a small number of entries, and the biggest entry
+# does not exceed a given threshold. These thresholds can be configured using
+# the following directives.
+set-max-listpack-entries 128
+set-max-listpack-value 64
+
+# Similarly to hashes and lists, sorted sets are also specially encoded in
+# order to save a lot of space. This encoding is only used when the length and
+# elements of a sorted set are below the following limits:
+zset-max-listpack-entries 128
+zset-max-listpack-value 64
+
+# HyperLogLog sparse representation bytes limit. The limit includes the
+# 16 bytes header. When a HyperLogLog using the sparse representation crosses
+# this limit, it is converted into the dense representation.
+#
+# A value greater than 16000 is totally useless, since at that point the
+# dense representation is more memory efficient.
+#
+# The suggested value is ~ 3000 in order to have the benefits of
+# the space efficient encoding without slowing down too much PFADD,
+# which is O(N) with the sparse encoding. The value can be raised to
+# ~ 10000 when CPU is not a concern, but space is, and the data set is
+# composed of many HyperLogLogs with cardinality in the 0 - 15000 range.
+hll-sparse-max-bytes 3000
+
+# Streams macro node max size / items. The stream data structure is a radix
+# tree of big nodes that encode multiple items inside. Using this configuration
+# it is possible to configure how big a single node can be in bytes, and the
+# maximum number of items it may contain before switching to a new node when
+# appending new stream entries. If any of the following settings are set to
+# zero, the limit is ignored, so for instance it is possible to set just a
+# max entries limit by setting max-bytes to 0 and max-entries to the desired
+# value.
+stream-node-max-bytes 4096
+stream-node-max-entries 100
+
+# Active rehashing uses 1 millisecond every 100 milliseconds of CPU time in
+# order to help rehashing the main Redis hash table (the one mapping top-level
+# keys to values). The hash table implementation Redis uses (see dict.c)
+# performs a lazy rehashing: the more operation you run into a hash table
+# that is rehashing, the more rehashing "steps" are performed, so if the
+# server is idle the rehashing is never complete and some more memory is used
+# by the hash table.
+#
+# The default is to use this millisecond 10 times every second in order to
+# actively rehash the main dictionaries, freeing memory when possible.
+#
+# If unsure:
+# use "activerehashing no" if you have hard latency requirements and it is
+# not a good thing in your environment that Redis can reply from time to time
+# to queries with 2 milliseconds delay.
+#
+# use "activerehashing yes" if you don't have such hard requirements but
+# want to free memory asap when possible.
+activerehashing yes
+
+# The client output buffer limits can be used to force disconnection of clients
+# that are not reading data from the server fast enough for some reason (a
+# common reason is that a Pub/Sub client can't consume messages as fast as the
+# publisher can produce them).
+#
+# The limit can be set differently for the three different classes of clients:
+#
+# normal -> normal clients including MONITOR clients
+# replica -> replica clients
+# pubsub -> clients subscribed to at least one pubsub channel or pattern
+#
+# The syntax of every client-output-buffer-limit directive is the following:
+#
+# client-output-buffer-limit <class> <hard limit> <soft limit> <soft seconds>
+#
+# A client is immediately disconnected once the hard limit is reached, or if
+# the soft limit is reached and remains reached for the specified number of
+# seconds (continuously).
+# So for instance if the hard limit is 32 megabytes and the soft limit is
+# 16 megabytes / 10 seconds, the client will get disconnected immediately
+# if the size of the output buffers reach 32 megabytes, but will also get
+# disconnected if the client reaches 16 megabytes and continuously overcomes
+# the limit for 10 seconds.
+#
+# By default normal clients are not limited because they don't receive data
+# without asking (in a push way), but just after a request, so only
+# asynchronous clients may create a scenario where data is requested faster
+# than it can read.
+#
+# Instead there is a default limit for pubsub and replica clients, since
+# subscribers and replicas receive data in a push fashion.
+#
+# Note that it doesn't make sense to set the replica clients output buffer
+# limit lower than the repl-backlog-size config (partial sync will succeed
+# and then replica will get disconnected).
+# Such a configuration is ignored (the size of repl-backlog-size will be used).
+# This doesn't have memory consumption implications since the replica client
+# will share the backlog buffers memory.
+#
+# Both the hard or the soft limit can be disabled by setting them to zero.
+client-output-buffer-limit normal 0 0 0
+client-output-buffer-limit replica 256mb 64mb 60
+client-output-buffer-limit pubsub 32mb 8mb 60
+
+# Client query buffers accumulate new commands. They are limited to a fixed
+# amount by default in order to avoid that a protocol desynchronization (for
+# instance due to a bug in the client) will lead to unbound memory usage in
+# the query buffer. However you can configure it here if you have very special
+# needs, such us huge multi/exec requests or alike.
+#
+# client-query-buffer-limit 1gb
+
+# In some scenarios client connections can hog up memory leading to OOM
+# errors or data eviction. To avoid this we can cap the accumulated memory
+# used by all client connections (all pubsub and normal clients). Once we
+# reach that limit connections will be dropped by the server freeing up
+# memory. The server will attempt to drop the connections using the most
+# memory first. We call this mechanism "client eviction".
+#
+# Client eviction is configured using the maxmemory-clients setting as follows:
+# 0 - client eviction is disabled (default)
+#
+# A memory value can be used for the client eviction threshold,
+# for example:
+# maxmemory-clients 1g
+#
+# A percentage value (between 1% and 100%) means the client eviction threshold
+# is based on a percentage of the maxmemory setting. For example to set client
+# eviction at 5% of maxmemory:
+# maxmemory-clients 5%
+
+# In the Redis protocol, bulk requests, that are, elements representing single
+# strings, are normally limited to 512 mb. However you can change this limit
+# here, but must be 1mb or greater
+#
+# proto-max-bulk-len 512mb
+
+# Redis calls an internal function to perform many background tasks, like
+# closing connections of clients in timeout, purging expired keys that are
+# never requested, and so forth.
+#
+# Not all tasks are performed with the same frequency, but Redis checks for
+# tasks to perform according to the specified "hz" value.
+#
+# By default "hz" is set to 10. Raising the value will use more CPU when
+# Redis is idle, but at the same time will make Redis more responsive when
+# there are many keys expiring at the same time, and timeouts may be
+# handled with more precision.
+#
+# The range is between 1 and 500, however a value over 100 is usually not
+# a good idea. Most users should use the default of 10 and raise this up to
+# 100 only in environments where very low latency is required.
+hz 10
+
+# Normally it is useful to have an HZ value which is proportional to the
+# number of clients connected. This is useful in order, for instance, to
+# avoid too many clients are processed for each background task invocation
+# in order to avoid latency spikes.
+#
+# Since the default HZ value by default is conservatively set to 10, Redis
+# offers, and enables by default, the ability to use an adaptive HZ value
+# which will temporarily raise when there are many connected clients.
+#
+# When dynamic HZ is enabled, the actual configured HZ will be used
+# as a baseline, but multiples of the configured HZ value will be actually
+# used as needed once more clients are connected. In this way an idle
+# instance will use very little CPU time while a busy instance will be
+# more responsive.
+dynamic-hz yes
+
+# When a child rewrites the AOF file, if the following option is enabled
+# the file will be fsync-ed every 4 MB of data generated. This is useful
+# in order to commit the file to the disk more incrementally and avoid
+# big latency spikes.
+aof-rewrite-incremental-fsync yes
+
+# When redis saves RDB file, if the following option is enabled
+# the file will be fsync-ed every 4 MB of data generated. This is useful
+# in order to commit the file to the disk more incrementally and avoid
+# big latency spikes.
+rdb-save-incremental-fsync yes
+
+# Redis LFU eviction (see maxmemory setting) can be tuned. However it is a good
+# idea to start with the default settings and only change them after investigating
+# how to improve the performances and how the keys LFU change over time, which
+# is possible to inspect via the OBJECT FREQ command.
+#
+# There are two tunable parameters in the Redis LFU implementation: the
+# counter logarithm factor and the counter decay time. It is important to
+# understand what the two parameters mean before changing them.
+#
+# The LFU counter is just 8 bits per key, it's maximum value is 255, so Redis
+# uses a probabilistic increment with logarithmic behavior. Given the value
+# of the old counter, when a key is accessed, the counter is incremented in
+# this way:
+#
+# 1. A random number R between 0 and 1 is extracted.
+# 2. A probability P is calculated as 1/(old_value*lfu_log_factor+1).
+# 3. The counter is incremented only if R < P.
+#
+# The default lfu-log-factor is 10. This is a table of how the frequency
+# counter changes with a different number of accesses with different
+# logarithmic factors:
+#
+# +--------+------------+------------+------------+------------+------------+
+# | factor | 100 hits | 1000 hits | 100K hits | 1M hits | 10M hits |
+# +--------+------------+------------+------------+------------+------------+
+# | 0 | 104 | 255 | 255 | 255 | 255 |
+# +--------+------------+------------+------------+------------+------------+
+# | 1 | 18 | 49 | 255 | 255 | 255 |
+# +--------+------------+------------+------------+------------+------------+
+# | 10 | 10 | 18 | 142 | 255 | 255 |
+# +--------+------------+------------+------------+------------+------------+
+# | 100 | 8 | 11 | 49 | 143 | 255 |
+# +--------+------------+------------+------------+------------+------------+
+#
+# NOTE: The above table was obtained by running the following commands:
+#
+# redis-benchmark -n 1000000 incr foo
+# redis-cli object freq foo
+#
+# NOTE 2: The counter initial value is 5 in order to give new objects a chance
+# to accumulate hits.
+#
+# The counter decay time is the time, in minutes, that must elapse in order
+# for the key counter to be decremented.
+#
+# The default value for the lfu-decay-time is 1. A special value of 0 means we
+# will never decay the counter.
+#
+# lfu-log-factor 10
+# lfu-decay-time 1
+
+########################### ACTIVE DEFRAGMENTATION #######################
+#
+# What is active defragmentation?
+# -------------------------------
+#
+# Active (online) defragmentation allows a Redis server to compact the
+# spaces left between small allocations and deallocations of data in memory,
+# thus allowing to reclaim back memory.
+#
+# Fragmentation is a natural process that happens with every allocator (but
+# less so with Jemalloc, fortunately) and certain workloads. Normally a server
+# restart is needed in order to lower the fragmentation, or at least to flush
+# away all the data and create it again. However thanks to this feature
+# implemented by Oran Agra for Redis 4.0 this process can happen at runtime
+# in a "hot" way, while the server is running.
+#
+# Basically when the fragmentation is over a certain level (see the
+# configuration options below) Redis will start to create new copies of the
+# values in contiguous memory regions by exploiting certain specific Jemalloc
+# features (in order to understand if an allocation is causing fragmentation
+# and to allocate it in a better place), and at the same time, will release the
+# old copies of the data. This process, repeated incrementally for all the keys
+# will cause the fragmentation to drop back to normal values.
+#
+# Important things to understand:
+#
+# 1. This feature is disabled by default, and only works if you compiled Redis
+# to use the copy of Jemalloc we ship with the source code of Redis.
+# This is the default with Linux builds.
+#
+# 2. You never need to enable this feature if you don't have fragmentation
+# issues.
+#
+# 3. Once you experience fragmentation, you can enable this feature when
+# needed with the command "CONFIG SET activedefrag yes".
+#
+# The configuration parameters are able to fine tune the behavior of the
+# defragmentation process. If you are not sure about what they mean it is
+# a good idea to leave the defaults untouched.
+
+# Active defragmentation is disabled by default
+# activedefrag no
+
+# Minimum amount of fragmentation waste to start active defrag
+# active-defrag-ignore-bytes 100mb
+
+# Minimum percentage of fragmentation to start active defrag
+# active-defrag-threshold-lower 10
+
+# Maximum percentage of fragmentation at which we use maximum effort
+# active-defrag-threshold-upper 100
+
+# Minimal effort for defrag in CPU percentage, to be used when the lower
+# threshold is reached
+# active-defrag-cycle-min 1
+
+# Maximal effort for defrag in CPU percentage, to be used when the upper
+# threshold is reached
+# active-defrag-cycle-max 25
+
+# Maximum number of set/hash/zset/list fields that will be processed from
+# the main dictionary scan
+# active-defrag-max-scan-fields 1000
+
+# Jemalloc background thread for purging will be enabled by default
+jemalloc-bg-thread yes
+
+# It is possible to pin different threads and processes of Redis to specific
+# CPUs in your system, in order to maximize the performances of the server.
+# This is useful both in order to pin different Redis threads in different
+# CPUs, but also in order to make sure that multiple Redis instances running
+# in the same host will be pinned to different CPUs.
+#
+# Normally you can do this using the "taskset" command, however it is also
+# possible to this via Redis configuration directly, both in Linux and FreeBSD.
+#
+# You can pin the server/IO threads, bio threads, aof rewrite child process, and
+# the bgsave child process. The syntax to specify the cpu list is the same as
+# the taskset command:
+#
+# Set redis server/io threads to cpu affinity 0,2,4,6:
+# server_cpulist 0-7:2
+#
+# Set bio threads to cpu affinity 1,3:
+# bio_cpulist 1,3
+#
+# Set aof rewrite child process to cpu affinity 8,9,10,11:
+# aof_rewrite_cpulist 8-11
+#
+# Set bgsave child process to cpu affinity 1,10,11
+# bgsave_cpulist 1,10-11
+
+# In some cases redis will emit warnings and even refuse to start if it detects
+# that the system is in bad state, it is possible to suppress these warnings
+# by setting the following config which takes a space delimited list of warnings
+# to suppress
+#
+# ignore-warnings ARM64-COW-BUG