diff options
Diffstat (limited to 'tests/integration/failover.tcl')
| -rw-r--r-- | tests/integration/failover.tcl | 294 |
1 files changed, 294 insertions, 0 deletions
diff --git a/tests/integration/failover.tcl b/tests/integration/failover.tcl new file mode 100644 index 0000000..21fa3d2 --- /dev/null +++ b/tests/integration/failover.tcl @@ -0,0 +1,294 @@ +start_server {tags {"failover external:skip"} overrides {save {}}} { +start_server {overrides {save {}}} { +start_server {overrides {save {}}} { + set node_0 [srv 0 client] + set node_0_host [srv 0 host] + set node_0_port [srv 0 port] + set node_0_pid [srv 0 pid] + + set node_1 [srv -1 client] + set node_1_host [srv -1 host] + set node_1_port [srv -1 port] + set node_1_pid [srv -1 pid] + + set node_2 [srv -2 client] + set node_2_host [srv -2 host] + set node_2_port [srv -2 port] + set node_2_pid [srv -2 pid] + + proc assert_digests_match {n1 n2 n3} { + assert_equal [$n1 debug digest] [$n2 debug digest] + assert_equal [$n2 debug digest] [$n3 debug digest] + } + + test {failover command fails without connected replica} { + catch { $node_0 failover to $node_1_host $node_1_port } err + if {! [string match "ERR*" $err]} { + fail "failover command succeeded when replica not connected" + } + } + + test {setup replication for following tests} { + $node_1 replicaof $node_0_host $node_0_port + $node_2 replicaof $node_0_host $node_0_port + wait_for_sync $node_1 + wait_for_sync $node_2 + } + + test {failover command fails with invalid host} { + catch { $node_0 failover to invalidhost $node_1_port } err + assert_match "ERR*" $err + } + + test {failover command fails with invalid port} { + catch { $node_0 failover to $node_1_host invalidport } err + assert_match "ERR*" $err + } + + test {failover command fails with just force and timeout} { + catch { $node_0 FAILOVER FORCE TIMEOUT 100} err + assert_match "ERR*" $err + } + + test {failover command fails when sent to a replica} { + catch { $node_1 failover to $node_1_host $node_1_port } err + assert_match "ERR*" $err + } + + test {failover command fails with force without timeout} { + catch { $node_0 failover to $node_1_host $node_1_port FORCE } err + assert_match "ERR*" $err + } + + test {failover command to specific replica works} { + set initial_psyncs [s -1 sync_partial_ok] + set initial_syncs [s -1 sync_full] + + # Generate a delta between primary and replica + set load_handler [start_write_load $node_0_host $node_0_port 5] + pause_process [srv -1 pid] + wait_for_condition 50 100 { + [s 0 total_commands_processed] > 100 + } else { + fail "Node 0 did not accept writes" + } + resume_process [srv -1 pid] + + # Execute the failover + $node_0 failover to $node_1_host $node_1_port + + # Wait for failover to end + wait_for_condition 50 100 { + [s 0 master_failover_state] == "no-failover" + } else { + fail "Failover from node 0 to node 1 did not finish" + } + + # stop the write load and make sure no more commands processed + stop_write_load $load_handler + wait_load_handlers_disconnected + + $node_2 replicaof $node_1_host $node_1_port + wait_for_sync $node_0 + wait_for_sync $node_2 + + assert_match *slave* [$node_0 role] + assert_match *master* [$node_1 role] + assert_match *slave* [$node_2 role] + + # We should accept psyncs from both nodes + assert_equal [expr [s -1 sync_partial_ok] - $initial_psyncs] 2 + assert_equal [expr [s -1 sync_full] - $initial_psyncs] 0 + assert_digests_match $node_0 $node_1 $node_2 + } + + test {failover command to any replica works} { + set initial_psyncs [s -2 sync_partial_ok] + set initial_syncs [s -2 sync_full] + + wait_for_ofs_sync $node_1 $node_2 + # We stop node 0 to and make sure node 2 is selected + pause_process $node_0_pid + $node_1 set CASE 1 + $node_1 FAILOVER + + # Wait for failover to end + wait_for_condition 50 100 { + [s -1 master_failover_state] == "no-failover" + } else { + fail "Failover from node 1 to node 2 did not finish" + } + resume_process $node_0_pid + $node_0 replicaof $node_2_host $node_2_port + + wait_for_sync $node_0 + wait_for_sync $node_1 + + assert_match *slave* [$node_0 role] + assert_match *slave* [$node_1 role] + assert_match *master* [$node_2 role] + + # We should accept Psyncs from both nodes + assert_equal [expr [s -2 sync_partial_ok] - $initial_psyncs] 2 + assert_equal [expr [s -1 sync_full] - $initial_psyncs] 0 + assert_digests_match $node_0 $node_1 $node_2 + } + + test {failover to a replica with force works} { + set initial_psyncs [s 0 sync_partial_ok] + set initial_syncs [s 0 sync_full] + + pause_process $node_0_pid + # node 0 will never acknowledge this write + $node_2 set case 2 + $node_2 failover to $node_0_host $node_0_port TIMEOUT 100 FORCE + + # Wait for node 0 to give up on sync attempt and start failover + wait_for_condition 50 100 { + [s -2 master_failover_state] == "failover-in-progress" + } else { + fail "Failover from node 2 to node 0 did not timeout" + } + + # Quick check that everyone is a replica, we never want a + # state where there are two masters. + assert_match *slave* [$node_1 role] + assert_match *slave* [$node_2 role] + + resume_process $node_0_pid + + # Wait for failover to end + wait_for_condition 50 100 { + [s -2 master_failover_state] == "no-failover" + } else { + fail "Failover from node 2 to node 0 did not finish" + } + $node_1 replicaof $node_0_host $node_0_port + + wait_for_sync $node_1 + wait_for_sync $node_2 + + assert_match *master* [$node_0 role] + assert_match *slave* [$node_1 role] + assert_match *slave* [$node_2 role] + + assert_equal [count_log_message -2 "time out exceeded, failing over."] 1 + + # We should accept both psyncs, although this is the condition we might not + # since we didn't catch up. + assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 2 + assert_equal [expr [s 0 sync_full] - $initial_syncs] 0 + assert_digests_match $node_0 $node_1 $node_2 + } + + test {failover with timeout aborts if replica never catches up} { + set initial_psyncs [s 0 sync_partial_ok] + set initial_syncs [s 0 sync_full] + + # Stop replica so it never catches up + pause_process [srv -1 pid] + $node_0 SET CASE 1 + + $node_0 failover to [srv -1 host] [srv -1 port] TIMEOUT 500 + # Wait for failover to end + wait_for_condition 50 20 { + [s 0 master_failover_state] == "no-failover" + } else { + fail "Failover from node_0 to replica did not finish" + } + + resume_process [srv -1 pid] + + # We need to make sure the nodes actually sync back up + wait_for_ofs_sync $node_0 $node_1 + wait_for_ofs_sync $node_0 $node_2 + + assert_match *master* [$node_0 role] + assert_match *slave* [$node_1 role] + assert_match *slave* [$node_2 role] + + # Since we never caught up, there should be no syncs + assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 0 + assert_equal [expr [s 0 sync_full] - $initial_syncs] 0 + assert_digests_match $node_0 $node_1 $node_2 + } + + test {failovers can be aborted} { + set initial_psyncs [s 0 sync_partial_ok] + set initial_syncs [s 0 sync_full] + + # Stop replica so it never catches up + pause_process [srv -1 pid] + $node_0 SET CASE 2 + + $node_0 failover to [srv -1 host] [srv -1 port] TIMEOUT 60000 + assert_match [s 0 master_failover_state] "waiting-for-sync" + + # Sanity check that read commands are still accepted + $node_0 GET CASE + + $node_0 failover abort + assert_match [s 0 master_failover_state] "no-failover" + + resume_process [srv -1 pid] + + # Just make sure everything is still synced + wait_for_ofs_sync $node_0 $node_1 + wait_for_ofs_sync $node_0 $node_2 + + assert_match *master* [$node_0 role] + assert_match *slave* [$node_1 role] + assert_match *slave* [$node_2 role] + + # Since we never caught up, there should be no syncs + assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 0 + assert_equal [expr [s 0 sync_full] - $initial_syncs] 0 + assert_digests_match $node_0 $node_1 $node_2 + } + + test {failover aborts if target rejects sync request} { + set initial_psyncs [s 0 sync_partial_ok] + set initial_syncs [s 0 sync_full] + + # We block psync, so the failover will fail + $node_1 acl setuser default -psync + + # We pause the target long enough to send a write command + # during the pause. This write will not be interrupted. + pause_process [srv -1 pid] + set rd [redis_deferring_client] + $rd SET FOO BAR + $node_0 failover to $node_1_host $node_1_port + resume_process [srv -1 pid] + + # Wait for failover to end + wait_for_condition 50 100 { + [s 0 master_failover_state] == "no-failover" + } else { + fail "Failover from node_0 to replica did not finish" + } + + assert_equal [$rd read] "OK" + $rd close + + # restore access to psync + $node_1 acl setuser default +psync + + # We need to make sure the nodes actually sync back up + wait_for_sync $node_1 + wait_for_sync $node_2 + + assert_match *master* [$node_0 role] + assert_match *slave* [$node_1 role] + assert_match *slave* [$node_2 role] + + # We will cycle all of our replicas here and force a psync. + assert_equal [expr [s 0 sync_partial_ok] - $initial_psyncs] 2 + assert_equal [expr [s 0 sync_full] - $initial_syncs] 0 + + assert_equal [count_log_message 0 "Failover target rejected psync request"] 1 + assert_digests_match $node_0 $node_1 $node_2 + } +} +} +} |