Updates between 5.4.3 and 5.4.4: - Revert "uncompress: prevent reprepro from hanging on unzstd" - Wait for poll event Updates between 5.4.2 and 5.4.3: - uncompress: prevent block on unzstd (https://bugs.debian.org/1056380) Updates between 5.4.1 and 5.4.2: - Add SHA512 support (http://bugs.debian.org/855975) - uncompress: close the pipe after the child exits (https://bugs.launchpad.net/ubuntu/+bug/2008508) Updates between 5.4.0 and 5.4.1: - Add --ignore=conflictingarchall (http://bugs.debian.org/697630) - Add example to notify processing of .changes files (https://bugs.debian.org/827816) - If data tar extraction fails try again as uncompressed (https://bugs.debian.org/863061) - Prevent duplicated keyid in signing error message (https://bugs.debian.org/1006766) Updates between 5.3.1 and 5.4.0: - Add shunit2 based tests (https://bugs.debian.org/857302) - Support multiple versions. (https://bugs.debian.org/570623) - Add the commands move, movesrc, movematched, movefilter - Add Limit and Archive option Updates between 5.3.0 and 5.3.1: - fix manpage to add the behaviour if reprepro is linked against liblzma - mark 'dumpcontents' command as deprecated - Add Zstd support Updates between 5.2.0 and 5.3.0: - no Binary field in a .changes file is no longer an error but handled like an empty Binary field. (Needed to still accept source only .changes files by dpkg > 1.19.3). Updates between 5.1.1 and 5.2.0: - mark .lz support as deprecated - add _listcodenames command - allow to set Signed-By header via conf/distributions - add support for .asc files in source packages - some documentation improvements - allow '+' character in method-URI Updates between 5.1.0 and 5.1.1: - improve error handling when extracting .deb file contents - fix many spelling mistakes Updates between 5.0.0 and 5.1.0: - .gz, .bz2 and .lzma built-in uncompressors now also support concatenated files (as gunzip, bunzip2 and unxz). - added add unreferencesnapshot and removereference commands - fixed (Deb|Dsc)Indices parsing (did add a default Release even if none was specified) - some documentation improvements Updates between 4.18.0 and 5.0.0: - some code refactoring (no new features or bugfixes, only chances to break stuff) - require new status 103 behaviour from apt methods (i.e. http from squeeze and before no longer supported) - add support for .buildinfo files in .changes files Updates between 4.17.0 and 4.17.1: - fix bug with 'flood' if there are binaries belonging to different versions of the same source package - fix output caused by 'warning' FilterList files. Updates between 4.16.1 and 4.17.0: - some manpage fixes - '#' in filterlists are comments - fix parsing of strangly formatted control files - add Exportoptions: noexport option in conf/distributions - add Permit: unlisted_binary option in conf/incoming - -dbgsym are not differently looked for in changes' Binary field Updates between 4.16.0 and 4.16.1: - fix segfault in verbose exporting of xzed indices Updates between 4.15.0 and 4.16.0: - add support for xz uncompression using liblzma instead of unxz - enable using liblzma by default (if found and not --without-liblzma is given) - all example scripts in python now use python3 Updates between 4.14.1 and 4.15.0: - fixes to outsftphook example, new xz example, manpage improvements - support for native Packages.xz generation using liblzma (disabled by default) Updates between 4.13.1 and 4.14.0: - repairdescriptions also repairs udeb descriptions - automatically add long descriptions when updating packages from a source that does not have them - ignore Extra-Source-Only source packages by default - some small bugfixes and improvements Updates between 4.13.0 and 4.13.1: - fix bug in restore - fix percomponent udeb Contents filenames - add support for sources listing architecture wildcards to build-needing Updates between 4.12.5 and 4.13.0: - new commands: deleteifunreferenced repairdescriptions lsbycomponent - add ${$basename}, ${$filekey} and ${$fullfilename} to --listformat - reject absurd large values in ValidFor header - add --endhook, --outhook - SignWith: can now also contain external scripts for signing - several small cleanups and fixes Updates between 4.12.4 and 4.12.5: - various documentation improvements - fix bitrot in non-libarchive code Updates between 4.12.3 and 4.12.4: - fix bug when only generating .bz2 indices - ignore diff comments about unterminated lines when parsing .diff files Updates between 4.12.2 and 4.12.3: - actually set REPREPRO_CONFIG_DIR in hooks as documented in manpage - support 103 redirect message from apt's http method. (works best with apt >= 0.9.4) Updates between 4.12.1 and 4.12.2: - fix error with uploader files with more than 16 group members Updates between 4.12.0 and 4.12.1: - fix bash and zsh completion to work with config directories - add experimental -A, -C, -T support to the pull/update family of commands Updates between 4.11.0 and 4.12.0: - get InRelease from remote repositories (to disable use new GetInRelease: no) - always put Package field first in indices - support getting packages from remote repositories without md5sums. Updates between 4.10.0 and 4.11.0: - Contents files default location is now "percomponent compatsymlink". - unify handling of "unknown" section. Updates between 4.9.0 and 4.10.0: - allow "!include:" in conf/{distributions,updates,pulls,incoming} - conf/{distributions,updates,pulls,incoming} can be directories - add FilterList keyword 'supersede' to remove if upstream has newer pkgs - improve changelogs.example (CHANGELOGDIR empty stored directly in pool/) Updates between 4.8.2 and 4.9.0: - build-needing now allows one to look for things for 'all' and 'any' - improve error messages when parsing config files - uploader files now can 'include' other files. Updates between 4.8.1 and 4.8.2: - rredtool: produce .diff/Index files that reprepro can understand. - warn if uploader files contains key ids too long to handle - make .diff/Index parsing errors non-fatal Updates between 4.8.0 and 4.8.1: - fix NULL-dereference with broken Packages.diff/Index files Updates between 4.7.0 and 4.8.0: - add compatsymlink nocompatsymlink Contents: options (and document that the default will change in the future) Updates between 4.6.1 and 4.7.0: - add 'redochecksums' command - add percomponent and allcomponents to Contents: flags Updates between 4.6.0 and 4.6.1: - fix message given when replacing a package with the same version - fix bug not deleting packages if none added in update Updates between 4.5.1 and 4.6.0: - add 'FilterSrcList' for update and pull - ignore leading comments in control files Updates between 4.5.0 and 4.5.1: - 'check' also checks if architectures match - buffix in 'sourcemissing', 'unusedsources' and 'reportcruft' without tracking - fix 'pull' copying packages with wrong architecture - compile with libdb5 Updates between 4.4.0 and 4.5.0: - support reading of Release files without MD5Sum - add all missing Checksums-* when importing from remote repositories - add 'reportcruft' command Updates between 4.3.0 and 4.4.0: - SignWith allows multiple arguments to denote multiple keys to sign wtih - add removesrcs command (like removesrc can you can remove more at once) - uploaders files can have groups of uploaders and depend on the distribution to upload to (to share uploaders file between distributions) - add 'sizes' command. Updates between 4.2.0 and 4.3.0: - add special "$Delete" override field to get rid of fields - add support for ButAtuomaticUpgrades - add 'unusedsources' and 'sourcemissing' commands - add support for lzip compressed files - bugfixes ($component overrides, compiling without libbz2, with gcc4.5) Updates between 4.1.1 and 4.2.0: - allow patterns in override files - apply override files when doing 'pull' and 'update' - add special '$Component' override field - create InRelease file additionally to Release.gpg Updates between 4.1.1 and 4.1.2: - fix parsing of .orig-*.tar.* lines in .changes files, especially do not choke on _ characters. - add --onlysmalldeletes option to limit scope of update and pull Updates between 4.1.0 and 4.1.1: - fix calling --changes Log:-notifiers from processincoming - add '${$source}' and '${$sourceversion}' to --list-format Updates between 4.0.2 and 4.1.0: - rredtool can be used as index hook to maintain a .diff/Index file. - properly handle relative LogDir in conf/incoming - add ByHandHooks to conf/distributions (only used by processincoming yet) - fix extraction of exactly one of section or priority from a tar file. - new byhand statement for uploaders files and ByHandHook for configuration Updates between 4.0.1 and 4.0.2: - add support for xz de-compression - fix regression (since 3.8.0) breaking arch1>arch2 update rules. - some small warning output fixes in update code Updates between 4.0.0 and 4.0.1: - strip the last '/' from Method and Fallback in conf/updates to work around problems in some apt methods. (to get old behaviour, use "//") - 'check' now warns if a file was missing but could be readded - much more permissive check for libdb. You are on your own now to check what version to build against. Updates between 3.12.1 and 4.0.0: - disable old files.db handling (remove all support but translatelegacyfilelists), remove --oldfilesdb options - remove --overridedir - bugfixes in documentation and bash/zsh completion Updates between 3.12.0 and 3.12.1: - fix problems with libgpgme 1.2.0 Updates between 3.11.1 and 3.12.0: - warn if directories are relative to the currect directory but do not start with './' - directories starting '+b/' '+o/' and '+c/' are relative to basedir, outdir or confdir. - FakeComponentPrefix now no longer adds its arguments to components already having it and shortens their dist directories to not duplicate that either. - -A, -C and -T can have multiple arguments now, separated with '|'. - new 'flood' action to align architecture all packages - new '--show-percent' option - warn if old legacy files.db is still used - add new translatelegacyfilelists command for easier migration. (just a collectnewchecksums and deleting that file was enough, though) Updates between 3.11.0 and 3.11.1: - new changestool option --create-with-all-fields - new --morguedir option (or morguedir in conf/options, of course) - new $Version, $Source, $SourceVersion et al on formulas - bugfixes Updates between 3.10.0 and 3.11.0: - new --list-max and --list-skip options - new glob-matching in formulas (e.g. "reprepro listfilter codename 'Package (% linux-image-*)'") - new listmatched, removematched, copymatched and restorematched - new build-needing command to list source packages likely to need a build for a given architecture. - pull, predelete and update call retrack on distributions with tracking enabled. Updates between 3.9.2 and 3.10.0: - fix bug of ListHook not used if in the From: rule of a rule. - add ListShelllHook - add _listdbidentifiers and _listconfidentifiers - add --list-format to change format of list and listfilter + rewrite Release.gpg verification code: - more hops needed to use expired or revoked keys - earlier check of keys. now all keys in VerifyRelease must be known to gpg - subkeys are accepted if the key-id is appended with '+'. * improve uploader lists: - subkeys are accepted if key-if is appended with '+' - new 'anybody' while 'unsigned' now means really unsigned - new conditions to look as sourcename, binary names and sections Updates between 3.9.1 and 3.9.2: + fix bug (caught by assertion if there is no old index file) that inverts the logic of downloading .diff files when there is no DownLoadListsAs line. Updates between 3.9.0 and 3.9.1: + fix error of misinterpreting newer libz return value when extracting section from a .dsc. Updates between 3.8.2 and 3.9.0: + deprecate old (pre 3.3) file database format. Warn loudly when the database is still using that format. + new features - support Sources/Package.diff downloading (Use DownloadListsAs if you want to force .gz downloading instead) - support falling back to other compressions of index files when not downloadable at first. - changestool can now also look in .lzma files for .dsc section/priority - delete .new files in dists/ on error unless --keeptemporaries - new 'warning' state for FilterList - set REPREPRO_FROM and REPREPRO_CAUSING_RULE in some log notifiers + bug fixes: - re-enable workaround for apt-methods having problem with existing files which got lost in 3.8 - fix bug not looking at DownloadListsAs in all cases - bugfix in misparsing some .diff files for section/priority retrieval - do not stop when incomplete downloads or other stray files are in the pool Updates between 3.8.1 and 3.8.2: - add ReadOnly option for conf/distributions - support byhand and raw-* files in include and processincoming - allow uploading log files with .changes files - new LogDir in conf/incoming to store changes and log files. Updates between 3.8.0 and 3.8.1: - make filtercopy work again - fix bug not allowing source packages from flat repositories without Directory fields to be imported - add gnupghome option to make GNUPGHOME setable via conf/options Updates between 3.8.0~alpha and 3.8.0: - add support for generating Valid-Until fields in Release files Updates between 3.6.3 and 3.8.0~alpha: + different small improvements: - log notifiers can be limited to a specific command with --via - upgradeonly value for FilterList to only include a package if an older one is already there. - new --keepunusednewfiles to keep files just added to the pool but later in the same run decided to no longer be needed (for example because a package was not added because of later detected errors). - --keepunreferenced and actions implying this now print the number of files that lost their last reference - new dumpupdate and dumppull actions that are like checkupdate and checkpull put with output easier parseable - new ls action to list a package in all distributions + bugfixes - if FilterFormula excludes a package, FilterList can no longer put a package on hold. + improved decompression support - support looking into lzma compressed .deb, .diff and .tar files. - support for external helpers for uncompression (to speed up uncompression on multiple processors, also reprepro can now be compiled without libbz2 and zlib if needed) - support for downloading and using bz2 and lzma index files in updates + major changes to index file retrieval on updates: - iteratedupdate action was removed - update-rules can inherit settings from others - ListHooks are now called once per usage (mostly only makes a difference for flat upstream repositories) - --nolistsdownload no longer includes --noskipold and checks checksums of the lists files. - format of lists/ directory contents changed (I doubt anyone cares for the files in there, but if you do, you have been informed hereby that it looks differently) - lists/ directory no longer auto-cleaned, thus --(no)keepuneeded longer exists and new action cleanlists to clean files no longer usable... + visible effects of internal refactorisations: - multiple checks for identifiers more strict now - some fields in conf/distributions need a specific order now (Architectures and Components before things using the values defined by those) Updates between 3.6.2 and 3.6.3: - fix sha256 generation of very large files, thanks to Max Bowsher - allow multiple export hooks at once - use libgpg-error directly (to avoid some warnings in dependency analysis) Updates between 3.6.1 and 3.6.2: - --nooldfilesdb is the default now, create new repositories with --oldfilesdb if you do not want to destroy them by accidentially running reprepro versions before 3.0.0 on them... - fix content reading of overlong .deb files - fix parsing of flat repositories without Directory in Sources - fix tracking database corruption in removesrc with outdated tracking data [previously believed hard to trigger, but outdated tracking data suffices] - many improvements and less spelling errors in manpage Updates between 3.6.0 and 3.6.1: - fix reoverride - fix bz2 compression (newer libbz2 sometimes uses more return codes than previous versions, triggering a bug in reprepro) Updates between 3.5.2 and 3.6.0: - add IgnoreHashes option - allow list to list all packages if not package name specified. - support retrieving packages from flat repositories - speed up updating by buffering zlib's reading of index files - remove iteratedupdate - multiple little but nasty bugs fixed Updates between 3.5.1 and 3.5.2: - fix bug in optionsfilename generation introduced in 3.5.1 - add FakeComponentPrefix to cope with apt's problems with / in distribution names. Updates between 3.5.0 and 3.5.1: - support upcoming version 3 format source packages (priority and section extraction only for wig&pen and quilt format) - set environment variables REPREPRO_*_DIR when calling hooks. (note that those are set to the last set values, so for example REPREPRO_CONF_DIR will be the directory with 'distributions' in it, not necessarily the one with 'options' in it that was parsed). - other minor bugfixes Updates between 3.4.2 and 3.5.0: - allow suite names as command line arguments (when there is not codename of this name and only one distribution has this suite name) - generate and check Sha256, too. - changestool puts Files: last in .changes files so etch's dupload works. Updates between 3.4.1 and 3.4.2: now really fix the nasty bug with notifiers 3.4.1 should have fixed and be more verbose when rejecting packages because of problems with a key Updates between 3.4.0 and 3.4.1: bugfixes only (though of the ugly segfaults kind) Updates between 3.3.2 and 3.4.0: + bugfixes: - no longer mix up -S and -P command line arguments (introduced in 3.0.1) - some field overriding was erroneously case dependent. - many spelling corrections + improvements: - more support for Checksums-Sha1 - add copysrc and copyfilter commands (improve copy w.r.t tracking) - add restore restoresrc restorefilter and _addpackage commands - warn about some impossible -A -T combinations. - set fake Suite: in snapshots to quiet apt's signature checks. - add REPREPRO_CAUSING_FILE environment variable in log notifiers. - update expected fields to new dpkg-dev - try to extract missing section and priority of .dsc files from .diff.gz and .tar.gz. Updates between 3.3.1 and 3.3.2: - bugfix in includedeb and a little bit code cleanup Updates between 3.3.0 and 3.3.1: - multiple bugfixes Updates between 3.1.0 and 3.3.0: - add support for different checksums. The new checksums.db which stores all the checksums, while files.db still only stores md5sum and is the canonical information, when it exists. This way repositories keep backward compatible. A repository generated with --nooldfilesdb only has checksums.db and will not work with reprepro version prior to 3.3. New command collectnewchecksums to calculate checksums missing in the database. Updates between 3.0.1 and 3.1.0: - add sha1 hashes to the generated Release files. the changes semantics needed in the release.caches.db file for this should be transient. This will only cause index files without uncompressed variants to be regenerated once upon upgrade, but switching back and forth between previous versions and this or later versions will cause regenerating of unchanged files. - internal changes of reading of text files (.dsc/.changes/Release/ control from .deb). Should not make any difference with normal input, and make the situation better with strange input. - source packages now can have .tar und .diff lzma compressed (still missing is support for lzma compressed binary packages) Updates between 3.0.0 and 3.0.1: - the default for --export is now "changed", as the old default was just too confusing most of the time. - translatefilelist know also can convert databases with old and new style entries Updates between 2.2.4 and 3.0.0: - new config file parser: * many error messages now with line numbers * native support of comments (i.e. lines starting with # are now ignored, instead of treated as ignored headers, # within lines is now comment, too) * better support of tabs * meaning of empty fields changed, empty now means nothing and not all. - always parse the whole distributions file first before doing anything else (avoids actions started in the wrong base directory and helps to catch more disambiguities, may lead to the need of a valid config file for some actions not needing one, though). - check pull and update rules to not list any architectures or components that will never be used, so typos won't go unnoticed. - obsolete --overridedir and searching files in overrides/ directory by default. This places are still search, but so is the configuration directory now and future version will stop accepting --overridedir and not search in that directory. - added db/version file to document database format (so future versions can warn about incompatibilities) - cleaned up tracking handling a bit: * retrack no longer created tracking data for distributions without tracking * retrack only recreates usage data, not all data (so .changes files and old versions are no longer lost when run) also references from tracking data are now refreshed by rereferences instead * removealltracks now needs explicitly needs distribution names * tidytracks now removes all tracking data from a distribution without tracking * clearvanished removes tracking data from vanished distributions. - make update's ListHook relative to confdir (unless absolute) - added removesrc and removefilter - new format for contents.cache.db. Only needs half of the disk space and runtime to generate Contents files, but you need to run translatefilelists to translate the cached items (or delete your contents.cache.db and let reprepro reread all your .deb files). Also format and meaning of the Contents-fields changed, a rate no longer can be specified. Updates between 2.2.3 and 2.2.4: - [SECURITY] fix bug causing a Release.gpg with only unknown signatures considered as properly signed. Updates between 2.2.2 and 2.2.3: - add support for binNMUs (i.e. .changes files having a Version: that is not the source version). - add zsh auto-completions script Updates between 2.2.1 and 2.2.2: - processincoming can be limited to a single .changes file - fix to support apt-methods stating Send-Config: false - set GPG_TTY when stdin is a terminal to ease usage of pinentry-curses Updates between 2.2.0 and 2.2.1: - fix mixup of the name of the --spacecheck option - fix missing options in bash completions - fix segfault when including changes without notificators Updates between 2.1.0 and 2.2.0: - renamed cleartracks in removealltracks - new notifier type for accepted changes files - bugs fixed: * not tidy tracking dependencies on package remove * forgot to call some slow notifiers in processincoming - new --wait-for-lock option - check free space on update (new --spaceheck option to switch this off) - extended the changestool helper (add, adddsc, addrawfile, setdistribution) - processincoming changes: * reports and error if a package is not included due to an already existing newer version. * allow ignoring of unused files and newer versions (Permit:) * option when to delete rejected or faulty package (Cleanup:) - include command names incldued .changes files like processincoming does Updates between 2.0.0 and 2.1.0: - add --silent option - change some status output to stdout instead of stderr. - fix some uncessary exporting of index files - fix bug in term parsing (for FilterFormula and the like) - add Log: mechanism to log to file and execute external helpers - example-script to generate a packages.debian.org/changelogs like hierachy with changelog and copyright files. Updates between 1.3.1 and 2.0.0: - add "adddeb" action to changestool - fix bug in manpage ("accept" should have been "allow" for uploaders) - new AlsoAcceptFor:-header for conf/distributions to allow more fine controled which distributions to allow than just codename/suite or everything (via --ignore=wrongdistribution) - fail cleanly when getting a .dsc without Format header - fix bug in non-libarchive filelist extraction on large lists - add processincoming command to scan an incoming directory and add packages from there. (this needed some refactorisations of other code, so beware) - add gensnapshot command Updates between 1.3.0 and 1.3.1: - bugfix in changestool updatechecksums Updates between 1.2.0 and 1.3.0: - now uses libgpgme11 instead of libgpgme6. - remove --onlyacceptsigned switch (soon to be be replaced by something useable, hopefully) - only reject a package because of signatures if it only has bad signatures and no good one. (Rejecting a package because of a missing key when it would have processed without signature did not really make sense) - new --ignore=brokensignatures to also accept packages with broken signatures without any valid signature. - Now looks at the Binary: and Version: fields of a .changes file. Unless the new --ignore=wrongversion is specified, a dsc must have the same version, and a .deb must have this source version unless --ignore=wrongsourceversion is given. A .deb must also contain a package listed in the Binary: header unless --ignore=surprisingbinary is given. (A .dsc with an different name or a .deb with an different Source than the Source-header if the .changes file is still not ignoreable due to file naming issues) - FilterList in update and pull rules now has a space separated list of filenames instead of only a single filename. - new Uploaders field in conf/distributions: specifies what a .changes file has to be signed with to be allowed in - new helper program "changestool" to preprocess .changes files. Updates between 1.1.0 and 1.2.0: - improve message of missing files - checkin now support .tar.bz2, .diff.bz2 and .tar.bz2 (checkindsc did not care, binaries may contain tar.bz2 if reprepro is compiled with libarchive and libbz2) - fix bug delaying full Contents- generation Updates between 1.0.2 and 1.1.0: - extended the (experimental) package tracking feature - cleartracks removes files losing their last reference (unless --keepunreferenced as usual) - fix bug of not generating a uncompressed Sources line in Release when no uncompressed Sources file is generated. Updates between 1.0.1 and 1.0.2: - fix segfault in non-libarchive code introduced with 1.0.0 Updates between 1.0.0 and 1.0.1: - add clearvanished command - cope with GNU ar style .deb files (when using libarchive) - cope with strange control.tar.gz files (when not using libarchive) Updates between 0.9.1 and 1.0.0: - reject some .changes earlier, delete added files when checks after copying files to the pool failed. - handle some signals (TERM, ABRT, INT and QUIT) a bit more gracefully - some little fixes in the documentation - add predelete action to delete packages that would be deleted or replaced in an update - add new copy command to copy a single package from one distribution to another. Updates between 0.9.0 and 0.9.1: - fix bug in post-export script handling. - fixed documentation in tiffany.example how to generate .diff directories the new apt can read. Updates between 0.8.2 and 0.9.0: - added --export= option and harmonized exporting of distributions. (Now every distribution processed without errors is exported by default, with options for always, never or only export it when changed) - added pull and checkpull actions. Those are roughly equivalent to upgrade rules with file:/path/to/basedir Method, but faster and a bit more limited (files cannot change components) - fix segfault of checkupdate - fix including a changes file with source and restricting to some binary distribution or to binary package type. - add support to use libarchive instead of calling ar and tar - added Contents file generation support - now supporting libdb-4.4, libdb-4.3 and libdb3 Updates between 0.8.1 and 0.8.2: - mark process list files and only skip those not marked as processed instead those not newly downloaded. - change the wording of some warnings, add some new - new WORKAROUND part in the manpage - add example bash_completion script Updates between 0.8 and 0.8.1: - some bugfixes (segfault, memmory leak, manpage typos) - enforcement of extensions of include{,dsc,deb,udeb} files to .changes,.dsc,.deb,.udeb and new --ignore=extension to circumvent it. - support generation of the NotAutomatic field. - added --ignore=missingfile to ignore files missing in a .changes file, but lying around and requested by a .dsc file. Updates between 0.7 and 0.8: - unless the new --keepdirectories option is given, try to remove pool/ directories that got empty by removing things from them. (To be exact, try to rmdir(2) them every time, which will only work if they are empty). - Unless the new --noskipold is used, only targets with newly downloaded index files are updated. (new = downloaded by the instance of reprepro currently running) - reprepro now always puts the checksums of the uncompressed index files into the Release file, even if it is not written to disk. This fixes some problems with newer versions of apt. (Take a look at DscIndices to get older versions of reprepro to please them, too). - The export hooks (the programs specified as DebIndices, UDebIndices and DscIndices) are now always called once with the uncompressed names. - to compile reprepro with woody without a backported zlib use the -DOLDZLIB switch. - reprepro now supports bzip2 output natively. (You can still use the example if you want to call bzip2 yourself instead of using the libbz2 library) - new db/release.cache.db file storing md5sums of written index and Release files there. (This can cause Release file give old md5sums when the files are not what it expects, but unless you manually changed them that is a good way to find errors, and manually changing if fragile anyway, so better do not do it but ask me if some feature is missing overrides cannot offer yet). Updates between 0.6 and 0.7: - new --ignore=missingfield,brokenold,brokenversioncmp, unusedarch,surpisingarch - Fix segfault when update file is empty. (Thanks to Gianluigi Tiesi for noticing this.) - improve manpage a little bit - many little tidy ups Updates between 0.5 and 0.6: - no longer set execute bit of generated Release.gpg files - use REPREPRO_BASE_DIR for default basedir, parse conf/options for further default options. (and add --no options to disable boolean options again, same for ignore) - new command createsymlinks (for symlinks like "stable"->"sarge") - parse FilterList default action correctly - putting .changes in a distribution not listed is now an error without --ignore=wrongdistribution (and without "ignore wrongdistributions" in conf/options) Updates between 0.4 and 0.5: - starts of source package tracking - add quick&dirty --ask-passphrase option - SignWith's argument is now used, use "yes" or "default" to get old behaviour - allow ~ in versions listed in .changes files Updates between 0.3 and 0.4: - minor bugfix: no longer readd existing packages, when after a delete rule a old package was found first. - adopt short-howto to changes in keywords. - many tidy ups and little bugfixes - add Fallback option to specify another host to get mirrored files from - default basedir is now "." i.e. the current directory. Updates between 0.2 and 0.3: - Override: SourceOverride: replaced by (Deb|UDeb|Dsc)Override - new command reoverride to reapply override information. - sometimes be a bit more verbose - new experimental iteratedupdate command , which is a variant of update but needs less memory. - to ignore Release signature failures two --force's are needed now. Updates between 0.1.1 and 0.2: - _md5sums command got removed. New command to dump the contents of the files database is _listmd5sums - --basedir (alias -b) will no longer override prior given values to --confdir, --listdir, .... - fix nasty overflow bug - write Release, Packages, and Sources files first to .new variants and move then all at once. - new Options DebIndices DscIndices UDebIndices