diff options
Diffstat (limited to '')
| -rwxr-xr-x | heartbeat/ServeRAID | 427 |
1 files changed, 427 insertions, 0 deletions
diff --git a/heartbeat/ServeRAID b/heartbeat/ServeRAID new file mode 100755 index 0000000..6d6596f --- /dev/null +++ b/heartbeat/ServeRAID @@ -0,0 +1,427 @@ +#!/bin/sh +# +# +# ServeRAID +# +# Description: Enables/Disables shared ServeRAID merge groups +# +# Author: Alan Robertson, Renzo Alejandro Granados +# +# Support: users@clusterlabs.org +# +# License: GNU General Public License (GPL) +# +# Copyright: (C) 2002-2005 International Business Machines +# (C) 2002 Renzo Alejandro Granados +# +# usage: ./ServeRAID (start|stop|status|monitor|validate-all|meta-data) +# +# OCF parameters are as below: +# OCF_RESKEY_serveraid +# (Adapter number of the ServeRAID adapter) +# OCF_RESKEY_mergegroup +# (MergeGroup # of the logical drive under consideration) +# +# The ServeRAID clustering model is a bit odd, and its terminology needs +# a little explanation +# +# Logical Volume - a particular SCSI id {target id and LUN} on +# a particular controller. +# +# Merge Group - when active on one side or the other of the ServeRAID +# configuration it corresponds with a logical drive. +# Merge group numbers are permanently assigned to a particular +# chunk of storage. Shared merge groups are in the +# range of 1 to 8, and are largely arbitrary. +# Unshared merge groups start at 200. +# We can only deal with shared merge groups. When a merge +# group is activated on one of the controllers, it becomes +# a logical volume on that system. NOTE: The order in +# which the Merge Groups are activated determines which +# SCSI Ids they become. This makes for extra headaches +# for this script to deal with. It also means that if +# you have more than one shared ServeRAID merge group on +# a particular controller, that the SCSI IDs will not +# be constant. This requires mounting by uuid or label. +# +# One of the ServerRAID controllers has to be configured with +# SCSI initiator ID 6, and the other with SCSI id 7. +# +# At this time, the ServeRAID clustering solution only works with +# RAID 1 setups. It does NOT support RAID 5. This is a firmware +# bug in the ServeRAID where it doesn't fail over correctly +# if the RAID5 array is in a critical state... +# +# Note that this script requires ServeRAID software version 6.10 or +# later. This software is now available from IBM. +# +# An example usage in /etc/ha.d/haresources: +# node1 10.0.0.170 ServeRAID::1::1 +# + +# Older ServeRAID utility returns 1 when it succeeds (weird) +# BUT - the newly released version is more normal... + +####################################################################### +# Initialization: + +: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat} +. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs + +# Parameter defaults + +OCF_RESKEY_serveraid_default="" +OCF_RESKEY_mergegroup_default="" + +: ${OCF_RESKEY_serveraid=${OCF_RESKEY_serveraid_default}} +: ${OCF_RESKEY_mergegroup=${OCF_RESKEY_mergegroup_default}} + +####################################################################### + +srsuccess=0 +SCSI="scsi " + +usage() { + cat <<-EOF + usage: $0 (start|stop|status|monitor|validate-all|meta-data) + + You have to set the following environment virables before running $0 : + OCF_RESKEY_serveraid + (Adapter number of the ServeRAID adapter) + OCF_RESKEY_mergegroup + (MergeGroup # of the logical drive under consideration) + + ServeRAID adapters are numbered starting from 1. + + The shared merge group number is a number between 1 and 8 inclusive. + It indicates to the controller which logical disk to fail over. + + node1 10.0.0.170 ServeRAID::1::1 + + PREREQUISITES: + You must configure your ServeRAID adapters for clustering for this + to work. + + To do this, you must use the bootable "ServeRAID Support CD" and right + click your controller and pick "configure for clustering". The Linux + version of the ServeRAID manager does not have the "configure for + clustering" option. + + You will need at least version 6.10 (~July 2003 release) of the ipssend + command for this script to work. + + EOF +} + +meta_data() { + cat <<END +<?xml version="1.0"?> +<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd"> +<resource-agent name="ServeRAID" version="1.0"> +<version>1.0</version> + +<longdesc lang="en"> +Resource script for ServeRAID. It enables/disables shared ServeRAID merge groups. +</longdesc> +<shortdesc lang="en">Enables and disables shared ServeRAID merge groups</shortdesc> + +<parameters> +<parameter name="serveraid" unique="0" required="1"> +<longdesc lang="en"> +The adapter number of the ServeRAID adapter. +</longdesc> +<shortdesc lang="en">serveraid</shortdesc> +<content type="integer" default="${OCF_RESKEY_serveraid_default}" /> +</parameter> + +<parameter name="mergegroup" unique="0" required="1"> +<longdesc lang="en"> +The logical drive under consideration. +</longdesc> +<shortdesc lang="en">mergegroup</shortdesc> +<content type="integer" default="${OCF_RESKEY_mergegroup_default}" /> +</parameter> +</parameters> + +<actions> +<action name="start" timeout="40s" /> +<action name="stop" timeout="40s" /> +<action name="status" depth="0" timeout="20s" interval="10s" /> +<action name="monitor" depth="0" timeout="20s" interval="10s" /> +<action name="validate-all" timeout="5s" /> +<action name="meta-data" timeout="5s" /> +<action name="methods" timeout="5s" /> +</actions> +</resource-agent> +END +} + +ServeRAID_methods() { + cat <<-! + start + stop + status + validate-all + methods + usage + meta-data + ! +} + +ServeRAIDSCSI="/proc/scsi/ips" + + +IPS=ipssend +proc_scsi=/proc/scsi/scsi + + +parseinst() { + sr_adapter=error + sr_mergegroup=error + hostid=error + sr_logicaldrivenumber=error + if + [ $# -ne 2 ] + then + ocf_log err "Invalid ServeRAID instance: $*" + exit $OCF_ERR_ARGS + fi + PerlScript='next unless /^Host/; $_ .= <>.<>; print "$1 " if /SERVERAID/ and /Proces/ and /scsi(\d+)/' + # Get the list of host ids of the ServeRAID host adapters + hostlist=`$PERL -ne "${PerlScript}" <$proc_scsi` + # Figure the host id of the desired ServeRAID adapter + hostid=`echo $hostlist | cut -d' ' -f$1` + if + [ ! -f "$ServeRAIDSCSI/$hostid" ] + then + ocf_log err "No such ServeRAID adapter: $1" + exit $OCF_ERR_ARGS + fi + + case $2 in + [1-8]);; + *) ocf_log err "Invalid Shared Merge Group Number: $2" + exit $OCF_ERR_ARGS;; + esac + sr_adapter=$1 + sr_mergegroup=$2 + CheckRaidLevel + return $? +} + +SRLogicalDriveConfig() { + $IPS getconfig $sr_adapter ld +} + +MergeGroupToSCSI_ID() { + + PerlScript="while (<>) { + /logical drive number *([0-9]+)/i && (\$ld=\$1); + /part of merge group *: *$sr_mergegroup *\$/i && print \$ld - 1, \"\n\"; + }" + + ID=`SRLogicalDriveConfig | $PERL -e "$PerlScript"` + case $ID in + [0-9]*) echo "$ID"; return 0;; + *) return 1;; + esac +} + +MergeGroupRaidLevel() { + + PerlScript="while (<>) { + /RAID level *: *([0-9]+[A-Za-z]*)/i && (\$ld=\$1); + /part of merge group *: *$sr_mergegroup *\$/i && print \$ld, \"\n\"; + }" + + Level=`SRLogicalDriveConfig | $PERL -e "$PerlScript"` + case $Level in + ?*) echo "$Level"; return 0;; + *) return 1;; + esac +} + +CheckRaidLevel() { + RAIDlevel=`MergeGroupRaidLevel` + case $RAIDlevel in + *5*) + ocf_log err "ServeRAID device $sr_adapter $sr_mergegroup is RAID level $RAIDlevel" + ocf_log err "This level of ServeRAID RAID is not supported for failover by the firmware." + exit $OCF_ERR_GENERIC;; + esac + return $OCF_SUCCESS +} + + + + +ReleaseSCSI() { + targetid=`MergeGroupToSCSI_ID` + echo "${SCSI}remove-single-device $hostid 0 $targetid 0" > $proc_scsi +} + +AddSCSI() { + targetid=`MergeGroupToSCSI_ID` + echo "${SCSI}add-single-device $hostid 0 $targetid 0" > $proc_scsi +} + +# +# start: Enable the given ServeRAID device +# +ServeRAID_start() { + if + ServeRAID_status $serveraid $mergegroup + then + ocf_log debug "ServeRAID merge group $serveraid $mergegroup is running." + return $OCF_SUCCESS + else + if + # + # Normally we do a MERGE PARTNER, but if we still own the drive for + # some reason, then we'll need to do a MERGE OWN instead... + # + out=`$IPS MERGE $sr_adapter $sr_mergegroup PARTNER 2>&1` + if + [ $? -eq $srsuccess ] + then + ocf_log info "$out" + else + ocf_run $IPS MERGE $sr_adapter $sr_mergegroup OWN + fi + then + : OK All is well! + targetid=`MergeGroupToSCSI_ID` + sr_logicaldrivenumber=`expr $targetid + 1` + #run $IPS SYNCH $sr_adapter $sr_logicaldrivenumber & + # This version of the SYNCH command requires the 6.10 or later + # ServeRAID support CD. + # To avoid issues when called by lrmd, redirect stdout->stderr. + # Use () to create a subshell to make the redirection be synchronized. + ( ocf_run $IPS SYNCH $sr_adapter $sr_mergegroup & ) >&2 + AddSCSI + else + return $OCF_ERR_GENERIC + fi + fi + if + ServeRAID_status "$@" + then + return $OCF_SUCCESS + else + ocf_log err "ServeRAID device $1 not active!" + exit $OCF_ERR_GENERIC + fi +} + + +# +# stop: Disable the given ServeRAID device +# +ServeRAID_stop() { + parseinst "$@" + ReleaseSCSI + if + ocf_run $IPS UNMERGE $sr_adapter $sr_mergegroup + then + : UNMERGE $sr_adapter $sr_mergegroup worked + fi + if + ServeRAID_status "$@" + then + ocf_log err "ServeRAID device $* is still active!" + return $OCF_ERR_GENERIC + else + return $OCF_SUCCESS + fi +} + + +# +# status: is the given device now available? +# +ServeRAID_status() { + parseinst "$@" + # + # The output we're looking for + # Part of merge group : 2 + # + SRLogicalDriveConfig \ + | grep -i "part of merge group[ ]*: *$sr_mergegroup *\$" >/dev/null +} + +# +# validate_all: are the OCF instance parameters valid? +# +ServeRAID_validate_all() { + check_binary $PERL + +# parseinst() will do all the work... + parseinst "$@" + return $? +} + +if + ( [ $# -ne 1 ] ) +then + usage + exit $OCF_ERR_ARGS +fi + +# These operations don't require OCF instance parameters to be set +case "$1" in + meta-data) + meta_data + exit $OCF_SUCCESS;; +# +# methods: What methods do we support? +# + methods) + ServeRAID_methods + exit $?;; + usage) + usage + exit $OCF_SUCCESS;; + *) + ;; +esac + +if + ( [ -z "$OCF_RESKEY_serveraid" ] || [ -z "$OCF_RESKEY_mergegroup" ] ) +then + ocf_log err "You have to set the OCF_RESKEY_serveraid and OCF_RESKEY_mergegroup\n + enviroment virables before running $0 !" +# usage + exit $OCF_ERR_GENERIC +fi + +: Right Number of arguments.. +serveraid=$OCF_RESKEY_serveraid +mergegroup=$OCF_RESKEY_mergegroup + +# Look for the start, stop, status, or methods calls... +case "$1" in + stop) + ServeRAID_stop $serveraid $mergegroup + exit $?;; + start) + ServeRAID_start $serveraid $mergegroup + exit $?;; + status|monitor) + if + ServeRAID_status $serveraid $mergegroup + then + ocf_log debug "ServeRAID merge group $serveraid $mergegroup is running." + exit $OCF_SUCCESS + else + ocf_log debug "ServeRAID merge group $serveraid $mergegroup is stopped." + exit $OCF_NOT_RUNNING + fi + exit $?;; + validate-all) + ServeRAID_validate_all $serveraid $mergegroup + exit $?;; + *) + usage + exit $OCF_ERR_UNIMPLEMENTED;; + +esac |