diff options
Diffstat (limited to 'tools/ocft/IPaddr2v4')
| -rw-r--r-- | tools/ocft/IPaddr2v4 | 323 |
1 files changed, 323 insertions, 0 deletions
diff --git a/tools/ocft/IPaddr2v4 b/tools/ocft/IPaddr2v4 new file mode 100644 index 0000000..4d37168 --- /dev/null +++ b/tools/ocft/IPaddr2v4 @@ -0,0 +1,323 @@ +# IPaddr2v4 + +# Note: This test case uses two NICs(eth0, eth1) and +# a IPv4 address prefix (192.168.144.0/24). +# Adjust them according to your environment at VARIABLE section if needed. + +CONFIG + Agent IPaddr2 + AgentRoot /usr/lib/ocf/resource.d/heartbeat + HangTimeout 20 + +VARIABLE + OCFT_target_ip=192.168.144.2 + OCFT_target_nic=eth0 + OCFT_target_prefix=24 + OCFT_target_netaddr=192.168.144.1/$OCFT_target_prefix + OCFT_target_brd=192.168.144.255 + OCFT_wrong_ip=192.168.120.1 + OCFT_force_nic=eth1 + OCFT_force_prefix=16 + OCFT_force_prefix2=28 + OCFT_force_brd=192.168.255.255 + +SETUP-AGENT + ip addr add $OCFT_target_netaddr dev $OCFT_target_nic brd $OCFT_target_brd + +CLEANUP-AGENT + ip addr del $OCFT_target_netaddr dev $OCFT_target_nic + +CASE-BLOCK required_args + Env OCF_RESKEY_ip=$OCFT_target_ip + Env OCFT_check_ip=$OCFT_target_ip + Env OCFT_check_prefix=$OCFT_target_prefix + Env OCFT_check_nic=$OCFT_target_nic + +CASE-BLOCK check_ip_assigned + Bash ip -4 -o addr show $OCFT_check_nic | grep -w $OCFT_check_ip/$OCFT_check_prefix >/dev/null # checking if the IPv4 address was assigned correctly + +CASE-BLOCK check_ip_removed + Bash ! ip -4 -o addr show $OCFT_check_nic | grep -w $OCFT_check_ip/$OCFT_check_prefix >/dev/null # checking if the IPv4 address was removed correctly + +CASE-BLOCK base_ip_assigned + Bash ip addr add $OCFT_target_netaddr dev $OCFT_target_nic brd $OCFT_target_brd + +CASE-BLOCK base_ip_removed + Bash ip addr del $OCFT_target_netaddr dev $OCFT_target_nic + +CASE-BLOCK default_status + AgentRun stop + +CASE-BLOCK prepare + Include required_args + Include default_status + +# CASE No.0 +# +CASE "normal start" + Include prepare + AgentRun start OCF_SUCCESS + Include check_ip_assigned + +# CASE No.1 +# +CASE "normal stop" + Include prepare + AgentRun start + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.2 +# +CASE "double start" + Include prepare + AgentRun start + AgentRun start OCF_SUCCESS + +# CASE No.3 +# +CASE "double stop" + Include prepare + AgentRun stop OCF_SUCCESS + +# CASE No.4 +# +CASE "monitor with running" + Include prepare + AgentRun start + AgentRun monitor OCF_SUCCESS + +# CASE No.5 +# +CASE "monitor with not running" + Include prepare + AgentRun monitor OCF_NOT_RUNNING + +# CASE No.6 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 succeeds if the ip matched based on the netmask of the subnet +# or fails if it did not match to any. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 was using a wrong subnet mask (constant of 32) in this case. +# +CASE "params with nic, no cidr_netmask" + Include prepare + Env OCF_RESKEY_nic=$OCFT_target_nic + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.7 +# +CASE "params with nic, cidr_netmask" + Include prepare + Env OCF_RESKEY_nic=$OCFT_target_nic + Env OCF_RESKEY_cidr_netmask=$OCFT_target_prefix + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.8 +# +CASE "error params with wrong ip" + Include prepare + Env OCF_RESKEY_ip=$OCFT_wrong_ip + AgentRun start OCF_ERR_GENERIC + +# CASE No.9 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 fails when it could not determine the correct subnet mask. +# When it could not get base ip, it becomes the error. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 was using a wrong subnet mask (constant of 32) in this case. +# +CASE "params with force nic" + Include prepare + Env OCF_RESKEY_nic=$OCFT_force_nic + Env OCFT_check_nic=$OCFT_force_nic + AgentRun start OCF_ERR_GENERIC + Include check_ip_removed + Unenv OCF_RESKEY_nic + +# CASE No.10 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 fails when it could not determine the broadcast. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 succeeded but it's considered ambiguous. +# +CASE "params with force cidr_netmask (base netmask > assigned netmask)" + Include prepare + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix + Env OCFT_check_prefix=$OCFT_force_prefix + AgentRun start OCF_ERR_GENERIC + Include check_ip_removed + +# CASE No.11 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 succeeds but the broadcast is not set. +# This is because findif.sh can not calculate a broadcast from a netmask. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 succeeded with using a calculated broadcast. +# +CASE "force to use the specified nic and cidr_netmask" + Include prepare + Env OCF_RESKEY_nic=$OCFT_force_nic + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix + Env OCFT_check_nic=$OCFT_force_nic + Env OCFT_check_prefix=$OCFT_force_prefix + AgentRun start OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + Unenv OCF_RESKEY_cidr_netmask + + +# CASE No.12 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 fails when it could not determine the correct subnet mask. +# When it could not get base ip, it becomes the error. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 was using a wrong subnet mask (constant of 32) in this case. +# +CASE "error params with wrong ip and nic (not exist base_ip)" + Include prepare + Include base_ip_removed + Env OCF_RESKEY_nic=$OCFT_target_nic + Env OCFT_check_nic=$OCFT_target_nic + AgentRun start OCF_ERR_GENERIC + Include check_ip_removed + Include base_ip_assigned + +# CASE No.13 +# +CASE "params with cidr_netmask" + Include prepare + Env OCF_RESKEY_cidr_netmask=$OCFT_target_prefix + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.14 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 does not override the broadcast by cidr_netmask. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 overrode the broadcast calculated by cidr_netmask. +# +CASE "params with force cidr_netmask (base netmask < assigned netmask)" + Include prepare + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix2 + Env OCFT_check_prefix=$OCFT_force_prefix2 + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.15 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 fails when it could not determine the broadcast. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 succeeded but it's considered ambiguous. +# +CASE "error params with wrong ip and cidr_netmask (not exist base_ip)" + Include prepare + Include base_ip_removed + Env OCF_RESKEY_cidr_netmask=$OCFT_target_prefix + AgentRun start OCF_ERR_GENERIC + Include base_ip_assigned + +# CASE No.16 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 succeeds but the broadcast is not set. +# This is because findif.sh can not calculate a broadcast from a netmask. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 succeeded with using a calculated broadcast. +# +CASE "force to use the specified nic and cidr_netmask" + Include prepare + Env OCF_RESKEY_nic=$OCFT_force_nic + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix2 + Env OCFT_check_prefix=$OCFT_force_prefix2 + Env OCFT_check_nic=$OCFT_force_nic + AgentRun start OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.17 +# Note: this result is different from IPaddr2 in 3.9.3. +# IPaddr2 succeeds but the broadcast is not set. +# This is because findif.sh can not calculate a broadcast from a netmask. +# Recommended to always specify both nic, cidr_netmask, and broadcast when you needed. +# IPaddr2 in 3.9.3 succeeded with using a calculated broadcast. +# +CASE "force to use the specified nic and cidr_netmask (not exist base_ip)" + Include prepare + Include base_ip_removed + Env OCF_RESKEY_nic=$OCFT_force_nic + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix2 + Env OCFT_check_prefix=$OCFT_force_prefix2 + Env OCFT_check_nic=$OCFT_force_nic + AgentRun start OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Unenv OCF_RESKEY_nic + Unenv OCF_RESKEY_cidr_netmask + Include base_ip_assigned + +# CASE No.18 +# +CASE "params with broadcast, no nic, no cidr_netmask" + Include prepare + Env OCF_RESKEY_broadcast=$OCFT_force_brd + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + +# CASE No.19 +# +CASE "params with broadcast, no nic, no cidr_netmask" + Include prepare + Include base_ip_removed + Env OCF_RESKEY_broadcast=$OCFT_force_brd + AgentRun start OCF_ERR_GENERIC + Include base_ip_assigned + +# CASE No.20 +# +CASE "force to use the specified nic and cidr_netmask" + Include prepare + Env OCF_RESKEY_nic=$OCFT_force_nic + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix + Env OCF_RESKEY_broadcast=$OCFT_force_brd + Env OCFT_check_nic=$OCFT_force_nic + Env OCFT_check_prefix=$OCFT_force_prefix + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + Unenv OCF_RESKEY_cidr_netmask + +# CASE No.21 +# +CASE "force to use the specified nic and cidr_netmask" + Include prepare + Include base_ip_removed + Env OCF_RESKEY_nic=$OCFT_force_nic + Env OCF_RESKEY_cidr_netmask=$OCFT_force_prefix2 + Env OCF_RESKEY_broadcast=$OCFT_target_brd + Env OCFT_check_nic=$OCFT_force_nic + Env OCFT_check_prefix=$OCFT_force_prefix2 + AgentRun start OCF_SUCCESS + Include check_ip_assigned + AgentRun monitor OCF_SUCCESS + AgentRun stop OCF_SUCCESS + Include check_ip_removed + Include base_ip_assigned + |