Adding upstream version 3.8.1.upstream/3.8.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 397 insertions, 0 deletions

diff --git a/contrib/zstd/zstd_internal.h b/contrib/zstd/zstd_internal.h
new file mode 100644
index 0000000..8f4f64b
--- /dev/null
+++ b/contrib/zstd/zstd_internal.h
@@ -0,0 +1,397 @@
+/*
+ * Copyright (c) Meta Platforms, Inc. and affiliates.
+ * All rights reserved.
+ *
+ * This source code is licensed under both the BSD-style license (found in the
+ * LICENSE file in the root directory of this source tree) and the GPLv2 (found
+ * in the COPYING file in the root directory of this source tree).
+ * You may select, at your option, one of the above-listed licenses.
+ */
+
+#ifndef ZSTD_CCOMMON_H_MODULE
+#define ZSTD_CCOMMON_H_MODULE
+
+/* this module contains definitions which must be identical
+ * across compression, decompression and dictBuilder.
+ * It also contains a few functions useful to at least 2 of them
+ * and which benefit from being inlined */
+
+/*-*************************************
+*  Dependencies
+***************************************/
+#include "compiler.h"
+#include "cpu.h"
+#include "mem.h"
+#include "debug.h"                 /* assert, DEBUGLOG, RAWLOG, g_debuglevel */
+#include "error_private.h"
+#define ZSTD_STATIC_LINKING_ONLY
+#include "zstd.h"
+#define FSE_STATIC_LINKING_ONLY
+#include "fse.h"
+#include "huf.h"
+#ifndef XXH_STATIC_LINKING_ONLY
+#  define XXH_STATIC_LINKING_ONLY  /* XXH64_state_t */
+#endif
+#include "xxhash.h"                /* XXH_reset, update, digest */
+#ifndef ZSTD_NO_TRACE
+#  include "zstd_trace.h"
+#else
+#  define ZSTD_TRACE 0
+#endif
+
+#if defined (__cplusplus)
+extern "C" {
+#endif
+
+/* ---- static assert (debug) --- */
+#define ZSTD_STATIC_ASSERT(c) DEBUG_STATIC_ASSERT(c)
+#define ZSTD_isError ERR_isError   /* for inlining */
+#define FSE_isError  ERR_isError
+#define HUF_isError  ERR_isError
+
+
+/*-*************************************
+*  shared macros
+***************************************/
+#undef MIN
+#undef MAX
+#define MIN(a,b) ((a)<(b) ? (a) : (b))
+#define MAX(a,b) ((a)>(b) ? (a) : (b))
+#define BOUNDED(min,val,max) (MAX(min,MIN(val,max)))
+
+
+/*-*************************************
+*  Common constants
+***************************************/
+#define ZSTD_OPT_NUM    (1<<12)
+
+#define ZSTD_REP_NUM      3                 /* number of repcodes */
+static UNUSED_ATTR const U32 repStartValue[ZSTD_REP_NUM] = { 1, 4, 8 };
+
+#define KB *(1 <<10)
+#define MB *(1 <<20)
+#define GB *(1U<<30)
+
+#define BIT7 128
+#define BIT6  64
+#define BIT5  32
+#define BIT4  16
+#define BIT1   2
+#define BIT0   1
+
+#define ZSTD_WINDOWLOG_ABSOLUTEMIN 10
+static UNUSED_ATTR const size_t ZSTD_fcs_fieldSize[4] = { 0, 2, 4, 8 };
+static UNUSED_ATTR const size_t ZSTD_did_fieldSize[4] = { 0, 1, 2, 4 };
+
+#define ZSTD_FRAMEIDSIZE 4   /* magic number size */
+
+#define ZSTD_BLOCKHEADERSIZE 3   /* C standard doesn't allow `static const` variable to be init using another `static const` variable */
+static UNUSED_ATTR const size_t ZSTD_blockHeaderSize = ZSTD_BLOCKHEADERSIZE;
+typedef enum { bt_raw, bt_rle, bt_compressed, bt_reserved } blockType_e;
+
+#define ZSTD_FRAMECHECKSUMSIZE 4
+
+#define MIN_SEQUENCES_SIZE 1 /* nbSeq==0 */
+#define MIN_CBLOCK_SIZE (1 /*litCSize*/ + 1 /* RLE or RAW */)   /* for a non-null block */
+#define MIN_LITERALS_FOR_4_STREAMS 6
+
+typedef enum { set_basic, set_rle, set_compressed, set_repeat } symbolEncodingType_e;
+
+#define LONGNBSEQ 0x7F00
+
+#define MINMATCH 3
+
+#define Litbits  8
+#define LitHufLog 11
+#define MaxLit ((1<<Litbits) - 1)
+#define MaxML   52
+#define MaxLL   35
+#define DefaultMaxOff 28
+#define MaxOff  31
+#define MaxSeq MAX(MaxLL, MaxML)   /* Assumption : MaxOff < MaxLL,MaxML */
+#define MLFSELog    9
+#define LLFSELog    9
+#define OffFSELog   8
+#define MaxFSELog  MAX(MAX(MLFSELog, LLFSELog), OffFSELog)
+#define MaxMLBits 16
+#define MaxLLBits 16
+
+#define ZSTD_MAX_HUF_HEADER_SIZE 128 /* header + <= 127 byte tree description */
+/* Each table cannot take more than #symbols * FSELog bits */
+#define ZSTD_MAX_FSE_HEADERS_SIZE (((MaxML + 1) * MLFSELog + (MaxLL + 1) * LLFSELog + (MaxOff + 1) * OffFSELog + 7) / 8)
+
+static UNUSED_ATTR const U8 LL_bits[MaxLL+1] = {
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     1, 1, 1, 1, 2, 2, 3, 3,
+     4, 6, 7, 8, 9,10,11,12,
+    13,14,15,16
+};
+static UNUSED_ATTR const S16 LL_defaultNorm[MaxLL+1] = {
+     4, 3, 2, 2, 2, 2, 2, 2,
+     2, 2, 2, 2, 2, 1, 1, 1,
+     2, 2, 2, 2, 2, 2, 2, 2,
+     2, 3, 2, 1, 1, 1, 1, 1,
+    -1,-1,-1,-1
+};
+#define LL_DEFAULTNORMLOG 6  /* for static allocation */
+static UNUSED_ATTR const U32 LL_defaultNormLog = LL_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const U8 ML_bits[MaxML+1] = {
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     0, 0, 0, 0, 0, 0, 0, 0,
+     1, 1, 1, 1, 2, 2, 3, 3,
+     4, 4, 5, 7, 8, 9,10,11,
+    12,13,14,15,16
+};
+static UNUSED_ATTR const S16 ML_defaultNorm[MaxML+1] = {
+     1, 4, 3, 2, 2, 2, 2, 2,
+     2, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1,-1,-1,
+    -1,-1,-1,-1,-1
+};
+#define ML_DEFAULTNORMLOG 6  /* for static allocation */
+static UNUSED_ATTR const U32 ML_defaultNormLog = ML_DEFAULTNORMLOG;
+
+static UNUSED_ATTR const S16 OF_defaultNorm[DefaultMaxOff+1] = {
+     1, 1, 1, 1, 1, 1, 2, 2,
+     2, 1, 1, 1, 1, 1, 1, 1,
+     1, 1, 1, 1, 1, 1, 1, 1,
+    -1,-1,-1,-1,-1
+};
+#define OF_DEFAULTNORMLOG 5  /* for static allocation */
+static UNUSED_ATTR const U32 OF_defaultNormLog = OF_DEFAULTNORMLOG;
+
+
+/*-*******************************************
+*  Shared functions to include for inlining
+*********************************************/
+static void ZSTD_copy8(void* dst, const void* src) {
+#if defined(ZSTD_ARCH_ARM_NEON)
+    vst1_u8((uint8_t*)dst, vld1_u8((const uint8_t*)src));
+#else
+    ZSTD_memcpy(dst, src, 8);
+#endif
+}
+#define COPY8(d,s) { ZSTD_copy8(d,s); d+=8; s+=8; }
+
+/* Need to use memmove here since the literal buffer can now be located within
+   the dst buffer. In circumstances where the op "catches up" to where the
+   literal buffer is, there can be partial overlaps in this call on the final
+   copy if the literal is being shifted by less than 16 bytes. */
+static void ZSTD_copy16(void* dst, const void* src) {
+#if defined(ZSTD_ARCH_ARM_NEON)
+    vst1q_u8((uint8_t*)dst, vld1q_u8((const uint8_t*)src));
+#elif defined(ZSTD_ARCH_X86_SSE2)
+    _mm_storeu_si128((__m128i*)dst, _mm_loadu_si128((const __m128i*)src));
+#elif defined(__clang__)
+    ZSTD_memmove(dst, src, 16);
+#else
+    /* ZSTD_memmove is not inlined properly by gcc */
+    BYTE copy16_buf[16];
+    ZSTD_memcpy(copy16_buf, src, 16);
+    ZSTD_memcpy(dst, copy16_buf, 16);
+#endif
+}
+#define COPY16(d,s) { ZSTD_copy16(d,s); d+=16; s+=16; }
+
+#define WILDCOPY_OVERLENGTH 32
+#define WILDCOPY_VECLEN 16
+
+typedef enum {
+    ZSTD_no_overlap,
+    ZSTD_overlap_src_before_dst
+    /*  ZSTD_overlap_dst_before_src, */
+} ZSTD_overlap_e;
+
+/*! ZSTD_wildcopy() :
+ *  Custom version of ZSTD_memcpy(), can over read/write up to WILDCOPY_OVERLENGTH bytes (if length==0)
+ *  @param ovtype controls the overlap detection
+ *         - ZSTD_no_overlap: The source and destination are guaranteed to be at least WILDCOPY_VECLEN bytes apart.
+ *         - ZSTD_overlap_src_before_dst: The src and dst may overlap, but they MUST be at least 8 bytes apart.
+ *           The src buffer must be before the dst buffer.
+ */
+MEM_STATIC FORCE_INLINE_ATTR
+void ZSTD_wildcopy(void* dst, const void* src, ptrdiff_t length, ZSTD_overlap_e const ovtype)
+{
+    ptrdiff_t diff = (BYTE*)dst - (const BYTE*)src;
+    const BYTE* ip = (const BYTE*)src;
+    BYTE* op = (BYTE*)dst;
+    BYTE* const oend = op + length;
+
+    if (ovtype == ZSTD_overlap_src_before_dst && diff < WILDCOPY_VECLEN) {
+        /* Handle short offset copies. */
+        do {
+            COPY8(op, ip)
+        } while (op < oend);
+    } else {
+        assert(diff >= WILDCOPY_VECLEN || diff <= -WILDCOPY_VECLEN);
+        /* Separate out the first COPY16() call because the copy length is
+         * almost certain to be short, so the branches have different
+         * probabilities. Since it is almost certain to be short, only do
+         * one COPY16() in the first call. Then, do two calls per loop since
+         * at that point it is more likely to have a high trip count.
+         */
+        ZSTD_copy16(op, ip);
+        if (16 >= length) return;
+        op += 16;
+        ip += 16;
+        do {
+            COPY16(op, ip);
+            COPY16(op, ip);
+        }
+        while (op < oend);
+    }
+}
+
+MEM_STATIC size_t ZSTD_limitCopy(void* dst, size_t dstCapacity, const void* src, size_t srcSize)
+{
+    size_t const length = MIN(dstCapacity, srcSize);
+    if (length > 0) {
+        ZSTD_memcpy(dst, src, length);
+    }
+    return length;
+}
+
+/* define "workspace is too large" as this number of times larger than needed */
+#define ZSTD_WORKSPACETOOLARGE_FACTOR 3
+
+/* when workspace is continuously too large
+ * during at least this number of times,
+ * context's memory usage is considered wasteful,
+ * because it's sized to handle a worst case scenario which rarely happens.
+ * In which case, resize it down to free some memory */
+#define ZSTD_WORKSPACETOOLARGE_MAXDURATION 128
+
+/* Controls whether the input/output buffer is buffered or stable. */
+typedef enum {
+    ZSTD_bm_buffered = 0,  /* Buffer the input/output */
+    ZSTD_bm_stable = 1     /* ZSTD_inBuffer/ZSTD_outBuffer is stable */
+} ZSTD_bufferMode_e;
+
+
+/*-*******************************************
+*  Private declarations
+*********************************************/
+typedef struct seqDef_s {
+    U32 offBase;   /* offBase == Offset + ZSTD_REP_NUM, or repcode 1,2,3 */
+    U16 litLength;
+    U16 mlBase;    /* mlBase == matchLength - MINMATCH */
+} seqDef;
+
+/* Controls whether seqStore has a single "long" litLength or matchLength. See seqStore_t. */
+typedef enum {
+    ZSTD_llt_none = 0,             /* no longLengthType */
+    ZSTD_llt_literalLength = 1,    /* represents a long literal */
+    ZSTD_llt_matchLength = 2       /* represents a long match */
+} ZSTD_longLengthType_e;
+
+typedef struct {
+    seqDef* sequencesStart;
+    seqDef* sequences;      /* ptr to end of sequences */
+    BYTE*  litStart;
+    BYTE*  lit;             /* ptr to end of literals */
+    BYTE*  llCode;
+    BYTE*  mlCode;
+    BYTE*  ofCode;
+    size_t maxNbSeq;
+    size_t maxNbLit;
+
+    /* longLengthPos and longLengthType to allow us to represent either a single litLength or matchLength
+     * in the seqStore that has a value larger than U16 (if it exists). To do so, we increment
+     * the existing value of the litLength or matchLength by 0x10000.
+     */
+    ZSTD_longLengthType_e longLengthType;
+    U32                   longLengthPos;  /* Index of the sequence to apply long length modification to */
+} seqStore_t;
+
+typedef struct {
+    U32 litLength;
+    U32 matchLength;
+} ZSTD_sequenceLength;
+
+/**
+ * Returns the ZSTD_sequenceLength for the given sequences. It handles the decoding of long sequences
+ * indicated by longLengthPos and longLengthType, and adds MINMATCH back to matchLength.
+ */
+MEM_STATIC ZSTD_sequenceLength ZSTD_getSequenceLength(seqStore_t const* seqStore, seqDef const* seq)
+{
+    ZSTD_sequenceLength seqLen;
+    seqLen.litLength = seq->litLength;
+    seqLen.matchLength = seq->mlBase + MINMATCH;
+    if (seqStore->longLengthPos == (U32)(seq - seqStore->sequencesStart)) {
+        if (seqStore->longLengthType == ZSTD_llt_literalLength) {
+            seqLen.litLength += 0x10000;
+        }
+        if (seqStore->longLengthType == ZSTD_llt_matchLength) {
+            seqLen.matchLength += 0x10000;
+        }
+    }
+    return seqLen;
+}
+
+/**
+ * Contains the compressed frame size and an upper-bound for the decompressed frame size.
+ * Note: before using `compressedSize`, check for errors using ZSTD_isError().
+ *       similarly, before using `decompressedBound`, check for errors using:
+ *          `decompressedBound != ZSTD_CONTENTSIZE_ERROR`
+ */
+typedef struct {
+    size_t nbBlocks;
+    size_t compressedSize;
+    unsigned long long decompressedBound;
+} ZSTD_frameSizeInfo;   /* decompress & legacy */
+
+const seqStore_t* ZSTD_getSeqStore(const ZSTD_CCtx* ctx);   /* compress & dictBuilder */
+int ZSTD_seqToCodes(const seqStore_t* seqStorePtr);   /* compress, dictBuilder, decodeCorpus (shouldn't get its definition from here) */
+
+/* custom memory allocation functions */
+void* ZSTD_customMalloc(size_t size, ZSTD_customMem customMem);
+void* ZSTD_customCalloc(size_t size, ZSTD_customMem customMem);
+void ZSTD_customFree(void* ptr, ZSTD_customMem customMem);
+
+
+/* ZSTD_invalidateRepCodes() :
+ * ensures next compression will not use repcodes from previous block.
+ * Note : only works with regular variant;
+ *        do not use with extDict variant ! */
+void ZSTD_invalidateRepCodes(ZSTD_CCtx* cctx);   /* zstdmt, adaptive_compression (shouldn't get this definition from here) */
+
+
+typedef struct {
+    blockType_e blockType;
+    U32 lastBlock;
+    U32 origSize;
+} blockProperties_t;   /* declared here for decompress and fullbench */
+
+/*! ZSTD_getcBlockSize() :
+ *  Provides the size of compressed block from block header `src` */
+/* Used by: decompress, fullbench (does not get its definition from here) */
+size_t ZSTD_getcBlockSize(const void* src, size_t srcSize,
+                          blockProperties_t* bpPtr);
+
+/*! ZSTD_decodeSeqHeaders() :
+ *  decode sequence header from src */
+/* Used by: decompress, fullbench (does not get its definition from here) */
+size_t ZSTD_decodeSeqHeaders(ZSTD_DCtx* dctx, int* nbSeqPtr,
+                       const void* src, size_t srcSize);
+
+/**
+ * @returns true iff the CPU supports dynamic BMI2 dispatch.
+ */
+MEM_STATIC int ZSTD_cpuSupportsBmi2(void)
+{
+    ZSTD_cpuid_t cpuid = ZSTD_cpuid();
+    return ZSTD_cpuid_bmi1(cpuid) && ZSTD_cpuid_bmi2(cpuid);
+}
+
+#if defined (__cplusplus)
+}
+#endif
+
+#endif   /* ZSTD_CCOMMON_H_MODULE */