From 133a45c109da5310add55824db21af5239951f93 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 10 Apr 2024 23:30:40 +0200 Subject: Adding upstream version 3.8.1. Signed-off-by: Daniel Baumann --- contrib/libottery/ottery_common.h | 351 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 351 insertions(+) create mode 100644 contrib/libottery/ottery_common.h (limited to 'contrib/libottery/ottery_common.h') diff --git a/contrib/libottery/ottery_common.h b/contrib/libottery/ottery_common.h new file mode 100644 index 0000000..bac6f04 --- /dev/null +++ b/contrib/libottery/ottery_common.h @@ -0,0 +1,351 @@ +/* Libottery by Nick Mathewson. + + This software has been dedicated to the public domain under the CC0 + public domain dedication. + + To the extent possible under law, the person who associated CC0 with + libottery has waived all copyright and related or neighboring rights + to libottery. + + You should have received a copy of the CC0 legalcode along with this + work in doc/cc0.txt. If not, see + . + */ +#ifndef OTTERY_COMMON_H_HEADER_INCLUDED_ +#define OTTERY_COMMON_H_HEADER_INCLUDED_ +#include +#include + +/** @file */ + +struct ottery_config; + +/* Error codes */ + +/** + * @name libottery error codes and flags + * + * @{ + */ +/** No error has occurred. */ +#define OTTERY_ERR_NONE 0x0000 +/** We failed to allocate or initialize a lock. */ +#define OTTERY_ERR_LOCK_INIT 0x0001 +/** An internal error occurrred. This is probably a programming mistake + * in libottery. */ +#define OTTERY_ERR_INTERNAL 0x0002 +/** We were unable to connect to the operating system's strong RNG. */ +#define OTTERY_ERR_INIT_STRONG_RNG 0x0003 +/** We were unable to retrieve sufficient random bytes from the + * operating system's strong RNG. */ +#define OTTERY_ERR_ACCESS_STRONG_RNG 0x0004 +/** At least one argument to the function was invalid. */ +#define OTTERY_ERR_INVALID_ARGUMENT 0x0005 +/** An ottery_state structure was not aligned to a 16-byte boundary. */ +#define OTTERY_ERR_STATE_ALIGNMENT 0x0006 + +/** FATAL ERROR: An ottery_st function other than ottery_st_init() was + * called on and uninitialized state. */ +#define OTTERY_ERR_STATE_INIT 0x1000 +/** FLAG; FATAL ERROR: The error occurred while initializing the global + * state during the first call to an ottery_rand_* function. */ +#define OTTERY_ERR_FLAG_GLOBAL_PRNG_INIT 0x2000 +/** FLAG; FATAL ERROR: The error occurred while reinitializing a state + * after a fork(). (We need to do this, or else both processes would + * generate the same values, which could give dire results.) + */ +#define OTTERY_ERR_FLAG_POSTFORK_RESEED 0x4000 + +/** + * Checks whether an OTTERY_ERR value is a fatal error. + * + * @param err an OTTERY_ERR_* valuer + * @return True if err is fatal; false if it is not fatal. + */ +#define OTTERY_ERR_IS_FATAL(err) \ + (((err) & ~0xfff) != 0) + +/* Functions to interact with the library on a global level */ + +/** + * Override the behavior of libottery on a fatal error. + * + * By default, libottery will call abort() in a few circumstances, in + * order to keep the program from operating insecurely. If you want, + * you can provide another function to call instead. + * + * If your function does not itself abort() or exit() the process, or throw an + * exception (assuming some C family that has exceptions), libottery will + * continue running insecurely -- it might return predictable random numbers, + * leak secrets, or just return 0 for everything -- so you should really be + * very careful here. + * + * (The alternative to fatal errors would have been having all the + * ottery_rand_* functions able to return an error, and requiring users + * to check those codes. But experience suggests that C programmers + * frequently do not check error codes.) + * + * @param fn A function to call in place of abort(). It will receive as + * its argument one of the OTTERY_ERR_* error codes. + */ +void ottery_set_fatal_handler(void (*fn)(int errorcode)); + +/* Functions to manipulate parameters. */ + +/** + * @name Names of prfs for use with ottery_config_force_implementation + * + * @{ */ +#define OTTERY_PRF_CHACHA "CHACHA" +#define OTTERY_PRF_CHACHA8 "CHACHA8" +#define OTTERY_PRF_CHACHA12 "CHACHA12" +#define OTTERY_PRF_CHACHA20 "CHACHA20" +#define OTTERY_PRF_CHACHA_SIMD "CHACHA-SIMD" +#define OTTERY_PRF_CHACHA8_SIMD "CHACHA8-SIMD" +#define OTTERY_PRF_CHACHA12_SIMD "CHACHA12-SIMD" +#define OTTERY_PRF_CHACHA20_SIMD "CHACHA20-SIMD" +#define OTTERY_PRF_CHACHA_NO_SIMD "CHACHA-NOSIMD" +#define OTTERY_PRF_CHACHA8_NO_SIMD "CHACHA8-NOSIMD" +#define OTTERY_PRF_CHACHA12_NO_SIMD "CHACHA12-NOSIMD" +#define OTTERY_PRF_CHACHA20_NO_SIMD "CHACHA20-NOSIMD" +/** @} */ + +/** + * Initialize an ottery_config structure. + * + * You must call this function on any ottery_config structure before it + * can be passed to ottery_init() or ottery_st_init(). + * + * @param cfg The configuration object to initialize. + * @return Zero on success, or one of the OTTERY_ERR_* error codes on + * failure. + */ +int ottery_config_init(struct ottery_config *cfg); + +/** + * Try to force the use of a particular pseudorandom function for a given + * libottery instance. + * + * To use this function, you call it on an ottery_config structure after + * ottery_config_init(), and before passing that structure to + * ottery_st_init() or ottery_init(). + * + * @param cfg The configuration structure to configure. + * @param impl The name of a pseudorandom function. One of the + * OTTERY_PRF_* values. + * @return Zero on success, or one of the OTTERY_ERR_* error codes on + * failure. + */ +int ottery_config_force_implementation(struct ottery_config *cfg, + const char *impl); + +/** + * Set a device file to use as a source of strong entropy. + * + * To use this function, you call it on an ottery_config structure after + * ottery_config_init(), and before passing that structure to + * ottery_st_init() or ottery_init(). + * + * By default, libottery will try /dev/urandom on Unix-like systems. + * + * @param cfg The configuration structure to configure. + * @param fname The name of the device to use instead of /dev/urandom. This + * pointer is copied around, and must not be freed while any libottery state + * configured using this structure is still in use. + * + */ +void ottery_config_set_urandom_device(struct ottery_config *cfg, + const char *fname); + +/** + * Set a device file to use as a source of strong entropy from the operating + * system. + * + * To use this function, you call it on an ottery_config structure after + * ottery_config_init(), and before passing that structure to + * ottery_st_init() or ottery_init(). + * + * This function overrides the default behavior, and overrides any + * setting in ottery_config_set_urandom_device. + * + * You MUST NOT change the the file descriptor while any libottery PRNG + * configured with it is still running. For example, don't close it, or use + * dup2 to make it refer to a different file, or anything like that. + * + * It is probably a good idea to open the file with the CLOEXEC flag set. + * + * @param cfg The configuration structure to configure. + * @param fd A file descriptor to use as an OS rng source. + */ +void ottery_config_set_urandom_fd(struct ottery_config *cfg, + int fd); + +struct sockaddr; + +/** + * Configure a socket at which to find a local copy of some service + * implementing the EGD (entropy-gathering daemon) protocol. + * + * Unless this function is called, EGD is not used by default. + + * To use this function, you call it on an ottery_config structure after + * ottery_config_init(), and before passing that structure to + * ottery_st_init() or ottery_init(). + * + * TODO: This is not implemented for Windows yet. + * + * @param cfg The configuration structure to configure. + * @param addr The address of the daemon. Obviously, this should be + * some port on localhost, or a unix socket. This pointer is copied + * around, and must not be freed while any libottery state configured + * using this structure is still in use. + * @param len the length of the address. + * + */ +void ottery_config_set_egd_socket(struct ottery_config *cfg, + const struct sockaddr *addr, + int len); + +/** + * @brief External entropy sources. + * + * These can be passed as a bitmask to ottery_config_disable_entropy_sources. + * + * @{ */ +/** A unix-style /dev/urandom device. */ +#define OTTERY_ENTROPY_SRC_RANDOMDEV 0x0010000 +/** The Windows CryptGenRandom call. */ +#define OTTERY_ENTROPY_SRC_CRYPTGENRANDOM 0x0020000 +/** The Intel RDRAND instruction. */ +#define OTTERY_ENTROPY_SRC_RDRAND 0x0040000 +/** Some local server obeying the EGD protocol. Has no effect unless + * ottery_config_set_egd_socket was called. */ +#define OTTERY_ENTROPY_SRC_EGD 0x0080000 +/** @} */ + +/** + * Disable the use of one or more entropy sources. + * + * Note that if enough entropy sources are disabled, the state will + * not be able to get initialized, and libottery might not work. + * + * To use this function, you call it on an ottery_config structure after + * ottery_config_init(), and before passing that structure to + * ottery_st_init() or ottery_init(). + * + * @param cfg A configuration in which to disable one or more entropy sources. + * @param disabled_sources a bitwise combination of one or more + * OTTERY_ENTROPY_SRC_* values to disable. This will replace + * any previous bitmask of disabled sources. + * + */ +void ottery_config_disable_entropy_sources(struct ottery_config *cfg, + uint32_t disabled_sources); + +/** + * Mark one or more entropy sources as "weak". + * + * Unlike a disabled source, we will still try to read entropy from + * a weak source -- but we will fail if _only_ weak sources are available. + * + * Note that if enough entropy sources are disabled and/or weak sources are + * failing, the state will not be able to get initialized, and libottery might + * not work. + * + * To use this function, you call it on an ottery_config structure after + * ottery_config_init(), and before passing that structure to + * ottery_st_init() or ottery_init(). + * + * @param cfg A configuration in which to disable one or more entropy sources. + * @param weak_sources a bitwise combination of one or more + * OTTERY_ENTROPY_SRC_* values to mark as weak. This will replace + * any previous bitmask of weak sources. + */ +void ottery_config_mark_entropy_sources_weak(struct ottery_config *cfg, + uint32_t weak_source); + +/** Size reserved for struct ottery_config */ +#define OTTERY_CONFIG_DUMMY_SIZE_ 1024 + +#ifndef OTTERY_INTERNAL +/** + * A configuration object for setting up a libottery instance. + * + * An ottery_config structure is initialized with ottery_config_init, + * and passed to ottery_init() or ottery_st_init(). + * + * The contents of this structure are opaque; The definition here is + * defined to be large enough so that programs that allocate it will get + * more than enough room. + */ +struct ottery_config { + /** Nothing to see here */ + uint8_t dummy_[OTTERY_CONFIG_DUMMY_SIZE_]; +}; +#endif + +/** + * Get the minimal size for allocating an ottery_config. + * + * sizeof(ottery_config) will give an overestimate to allow binary + * compatibility with future versions of libottery. Use this function instead + * to get the minimal number of bytes to allocate. + * + * @return The minimal number of bytes to use when allocating an + * ottery_config structure. + */ +size_t ottery_get_sizeof_config(void); + +/** + * @name libottery build flag + * + * @see ottery_Get_build_flags() + * + * @{ + */ +/** Set if libottery was built with PID checking disabled. If this option is + * present, fork()ing can be dangerous. */ +#define OTTERY_BLDFLG_NO_PID_CHECK 0x00000001 +/** Set if libottery was built with initialization checking disabled. If this + * option is present, libottery might use an uninitialized, unseeded PRNGs. + */ +#define OTTERY_BLDFLG_NO_INIT_CHECK 0x00000002 +/** Set if locking was disabled. If this option is present, no libottery + * state, including the global state, is thread-safe. */ +#define OTTERY_BLDFLG_NO_LOCKING 0x00000004 +/** Set if the clear-after-yield feature was disabled. If this option is + * present, backtracking-resistance is somewhat compromised. */ +#define OTTERY_BLDFLG_NO_CLEAR_AFTER_YIELD 0x00000008 +/** Set if the stack-wiping feature was disabled. If this option is + * present, programs which accidentally read uninitialized data from the + * stack may leak some cryptographic state. */ +#define OTTERY_BLDFLG_NO_WIPE_STACK 0x00000010 +/** Set if SIMD support was disabled. This will make libottery slower. */ +#define OTTERY_BLDFLG_NO_SIMD 0x00010000 +/** @} */ + +/** A bitmask of any flags that might affect safe and secure program + * operation. */ +#define OTTERY_BLDFLG_MASK_SAFETY 0x0000ffff + +/** + * Return a bitmask of flags describing the compile-time options that this + * libottery instance was built with. Some of these flags might make the + * library less safe to use! + */ +uint32_t ottery_get_build_flags(void); + +/** + * Return a run-time version number for Libottery. The first three bytes are + * the major number, minor number, and patch-level respectively. The final + * byte is 0 for a released version, and nonzero otherwise. + */ +uint32_t ottery_get_version(void); +/** + * Return a human-readable string representing the run-time Libottery version. + */ +const char *ottery_get_version_string(void); + +const char *ottery_get_impl_name(void); + +#endif -- cgit v1.2.3