diff options
Diffstat (limited to '')
| -rw-r--r-- | source/configuration/modules/imjournal.rst | 474 |
1 files changed, 474 insertions, 0 deletions
diff --git a/source/configuration/modules/imjournal.rst b/source/configuration/modules/imjournal.rst new file mode 100644 index 0000000..5c0404c --- /dev/null +++ b/source/configuration/modules/imjournal.rst @@ -0,0 +1,474 @@ +*************************************** +imjournal: Systemd Journal Input Module +*************************************** + +=========================== =========================================================================== +**Module Name:** **imjournal** +**Author:** Jiri Vymazal <jvymazal@redhat.com> (This module is **not** project-supported) +**Available since:** 7.3.11 +=========================== =========================================================================== + + +Purpose +======= + +Provides the ability to import structured log messages from systemd +journal to syslog. + +Note that this module reads the journal database, what is considered a +relatively performance-intense operation. As such, the performance of a +configuration utilizing this module may be notably slower than when +using `imuxsock <imuxsock.html>`_. The journal provides imuxsock with a +copy of all "classical" syslog messages, however, it does not provide +structured data. Only if that structured data is needed, imjournal must be used. +Otherwise, imjournal may simply be replaced by imuxsock, and we highly +suggest doing so. + +We suggest to check out our short presentation on `rsyslog journal +integration <http://youtu.be/GTS7EuSdFKE>`_ to learn more details of +anticipated use cases. + +**Warning:** Some versions of systemd journal have problems with +database corruption, which leads to the journal to return the same data +endlessly in a tight loop. This results in massive message duplication +inside rsyslog probably resulting in a denial-of-service when the system +resources get exhausted. This can be somewhat mitigated by using proper +rate-limiters, but even then there are spikes of old data which are +endlessly repeated. By default, ratelimiting is activated and permits to +process 20,000 messages within 10 minutes, what should be well enough +for most use cases. If insufficient, use the parameters described below +to adjust the permitted volume. **It is strongly recommended to use this +plugin only if there is hard need to do so.** + + +Notable Features +================ + +- statistics counters + + +Configuration Parameters +======================== + +.. note:: + + Parameter names are case-insensitive. + + +Module Parameters +================= + + +PersistStateInterval +^^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "10", "no", "``$imjournalPersistStateInterval``" + +This is a global setting. It specifies how often should the journal +state be persisted. The persists happens after each *number-of-messages*. +This option is useful for rsyslog to start reading from the last journal +message it read. + +FileCreateMode +^^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "octalNumber", "0644", "no", "none" + +Set the access permissions for the state file. The value given must +always be a 4-digit octal number, with the initial digit being zero. +Please note that the actual permission depend on rsyslogd's process +umask. If in doubt, use "$umask 0000" right at the beginning of the +configuration file to remove any restrictions. The state file's only +consumer is rsyslog, so it's recommended to adjust the value according +to that. + + +StateFile +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "none", "no", "``$imjournalStateFile``" + +This is a global setting. It specifies where the state file for +persisting journal state is located. If a full path name is given +(starting with "/"), that path is used. Otherwise the given name +is created inside the working directory. + + +Ratelimit.Interval +^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "600", "no", "``$imjournalRatelimitInterval``" + +Specifies the interval in seconds onto which rate-limiting is to be +applied. If more than ratelimit.burst messages are read during that +interval, further messages up to the end of the interval are +discarded. The number of messages discarded is emitted at the end of +the interval (if there were any discards). + +**Setting this value to 0 turns off ratelimiting.** + +Note that it is *not recommended to turn off ratelimiting*, +except that you know for +sure journal database entries will never be corrupted. Without +ratelimiting, a corrupted systemd journal database may cause a kind +of denial of service We are stressing this point as multiple users +have reported us such problems with the journal database - in June +of 2013 and occasionally also after this time (up until the time of +this writing in January 2019). + + +Ratelimit.Burst +^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "20000", "no", "``$imjournalRatelimitBurst``" + +Specifies the maximum number of messages that can be emitted within +the ratelimit.interval interval. For further information, see +description there. + + +IgnorePreviousMessages +^^^^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "``$ImjournalIgnorePreviousMessages``" + +This option specifies whether imjournal should ignore messages +currently in journal and read only new messages. This option is only +used when there is no StateFile to avoid message loss. + + +DefaultSeverity +^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "severity", "5", "no", "``$ImjournalDefaultSeverity``" + +Some messages coming from journald don't have the SYSLOG_PRIORITY +field. These are typically the messages logged through journald's +native API. This option specifies the default severity for these +messages. Can be given either as a name or a number. Defaults to 'notice'. + + +DefaultFacility +^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "facility", "LOG_USER", "no", "``$ImjournalDefaultFacility``" + +Some messages coming from journald don't have the SYSLOG_FACILITY +field. These are typically the messages logged through journald's +native API. This option specifies the default facility for these +messages. Can be given either as a name or a number. Defaults to 'user'. + + +UsePidFromSystem +^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "0", "no", "none" + +Retrieves the trusted systemd parameter, _PID, instead of the user +systemd parameter, SYSLOG_PID, which is the default. +This option override the "usepid" option. +This is now deprecated. It is better to use usepid="syslog" instead. + + +UsePid +^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "both", "no", "none" + +Sets the PID source from journal. + +*syslog* + *imjournal* retrieves SYSLOG_PID from journal as PID number. + +*system* + *imjournal* retrieves _PID from journal as PID number. + +*both* + *imjournal* trying to retrieve SYSLOG_PID first. When it is not + available, it is also trying to retrieve _PID. When none of them is available, + message is parsed without PID number. + + +IgnoreNonValidStatefile +^^^^^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "on", "no", "none" + +When a corrupted statefile is read imjournal ignores the statefile and continues +with logging from the beginning of the journal (from its end if IgnorePreviousMessages +is on). After PersistStateInterval or when rsyslog is stopped invalid statefile +is overwritten with a new valid cursor. + + +WorkAroundJournalBug +^^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "on", "no", "none" + +.. versionadded:: 8.37.0 + +**Deprecated.** This option was intended as temporary and has no effect now +(since 8.1910.0). Left for backwards compatibility only. + + +FSync +^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +.. versionadded:: 8.1908.0 + +When there is a hard crash, power loss or similar abrupt end of rsyslog process, +there is a risk of state file not being written to persistent storage or possibly +being corrupted. This then results in imjournal starting reading elsewhere then +desired and most probably message duplication. To mitigate this problem you can +turn this option on which will force state file writes to persistent physical +storage. Please note that fsync calls are costly, so especially with lower +PersistStateInterval value, this may present considerable performance hit. + + +Remote +^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +.. versionadded:: 8.1910.0 + +When this option is turned on, imjournal will pull not only all local journal +files (default behavior), but also any journal files on machine originating from +remote sources. + +defaultTag +^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +.. versionadded:: 8.2312.0 + +The DefaultTag option specifies the default value for the tag field. +In imjournal, this can happen when one of the following is missing: + +* identifier string provided by the application (SYSLOG_IDENTIFIER) or +* name of the process the journal entry originates from (_COMM) + +Under normal circumstances, at least one of the previously mentioned fields +is always part of the journal message. But there are some corner cases +where this is not the case. This parameter provides the ability to alter +the content of the tag field. + + +Input Module Parameters +======================= + +Parameters specific to the input module. + +Main +^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "journal", "no", "none" + +.. versionadded:: 8.2312.0 + +When this option is turned on within the input module, imjournal will run the +target ruleset in the main thread and will be stop taking input if the output +module is not accepting data. If multiple input moduels set `main` to true, only +the first one will be affected. The non `main` rulesets will run in the +background thread and not affected by the output state. + + + +Statistic Counter +================= + +.. _imjournal-statistic-counter: + +This plugin maintains :doc:`statistics <../rsyslog_statistic_counter>` for each listener and for each worker thread. The listener statistic is named "imjournal". + +The following properties are maintained for each listener: + +- **read** - total number of message read from journal since startup. + +- **submitted** - total number of messages submitted to main queue after reading from journal for processing + since startup. All records may not be submitted due to rate-limiting. + +- **discarded** - total number of messages that were read but not submitted to main queue due to rate-limiting. + +- **failed** - total number of failures to read messages from journal. + +- **poll_failed** - total number of journal poll failures. + +- **rotations** - total number of journal file rotations. + +- **recovery_attempts** - total number of recovery attempts by imjournal after unknown errors by closing and + re-opening journal. + +- **ratelimit_discarded_in_interval** - number of messages discarded due to rate-limiting within configured + rate-limiting interval. + +- **disk_usage_bytes** - total size of journal obtained from sd_journal_get_usage(). + +Here is an example output of corresponding imjournal impstat message, which is produced by loading imjournal +with default rate-limit interval and burst and running a docker container with log-driver as journald that +spews lots of logs to stdout: + +.. code-block:: none + + Jun 13 15:02:48 app1-1.example.com rsyslogd-pstats: imjournal: origin=imjournal submitted=20000 read=216557 + discarded=196557 failed=0 poll_failed=0 rotations=6 recovery_attempts=0 ratelimit_discarded_in_interval=196557 + disk_usage_bytes=106610688 + +Although these counters provide insight into imjournal end message submissions to main queue as well as losses due to +rate-limiting or other problems to extract messages from journal, they don't offer full visibility into journal end +issues. While these counters measure journal rotations and disk usage, they do not offer visibility into message +loss due to journal rate-limiting. sd_journal_* API does not provide any visibility into messages that are +discarded by the journal due to rate-limiting. Journald does emit a syslog message when log messages cannot make +it into the journal due to rate-limiting: + +.. code-block:: none + + Jun 13 15:50:32 app1-1.example.com systemd-journal[333]: Suppressed 102 messages from /system.slice/docker.service + +Such messages can be processed after they are read through imjournal to get a signal for message loss due to journal +end rate-limiting using a dynamic statistics counter for such log lines with a rule like this: + +.. code-block:: none + + dyn_stats(name="journal" resettable="off") + if $programname == 'journal' and $msg contains 'Suppressed' and $msg contains 'messages from' then { + set $.inc = dyn_inc("journal", "suppressed_count"); + } + +Caveats/Known Bugs: +=================== + +- As stated above, a corrupted systemd journal database can cause major + problems, depending on what the corruption results in. This is beyond + the control of the rsyslog team. + +- imjournal does not check if messages received actually originated + from rsyslog itself (via omjournal or other means). Depending on + configuration, this can also lead to a loop. With imuxsock, this + problem does not exist. + + +Build Requirements: +=================== + +Development headers for systemd, version >= 197. + + +Example 1 +========= + +The following example shows pulling structured imjournal messages and +saving them into /var/log/ceelog. + +.. code-block:: none + + module(load="imjournal" PersistStateInterval="100" + StateFile="/path/to/file") #load imjournal module + module(load="mmjsonparse") #load mmjsonparse module for structured logs + + template(name="CEETemplate" type="string" string="%TIMESTAMP% %HOSTNAME% %syslogtag% @cee: %$!all-json%\n" ) #template for messages + + action(type="mmjsonparse") + action(type="omfile" file="/var/log/ceelog" template="CEETemplate") + + +Example 2 +========= + +The following example is the same as `Example 1`, but with the input module. + +.. code-block:: none + + ruleset(name="imjournam-example" queue.type="direct"){ + action(type="mmjsonparse") + action(type="omfile" file="/var/log/ceelog" template="CEETemplate") + } + + input( + type="imjournal" + ruleset="imjournam-example" + main="on" + ) |