diff options
Diffstat (limited to '')
| -rw-r--r-- | source/configuration/modules/omkafka.rst | 478 |
1 files changed, 478 insertions, 0 deletions
diff --git a/source/configuration/modules/omkafka.rst b/source/configuration/modules/omkafka.rst new file mode 100644 index 0000000..ece8cd6 --- /dev/null +++ b/source/configuration/modules/omkafka.rst @@ -0,0 +1,478 @@ +****************************** +omkafka: write to Apache Kafka +****************************** + +=========================== =========================================================================== +**Module Name:** **omkafka** +**Author:** `Rainer Gerhards <https://rainer.gerhards.net/>`_ <rgerhards@adiscon.com> +**Available since:** v8.7.0 +=========================== =========================================================================== + + +Purpose +======= + +The omkafka plug-in implements an Apache Kafka producer, permitting +rsyslog to write data to Kafka. + + +Configuration Parameters +======================== + +.. note:: + + Parameter names are case-insensitive. + + +Action Parameters +----------------- + +Note that omkafka supports some *Array*-type parameters. While the parameter +name can only be set once, it is possible to set multiple values with that +single parameter. See the :ref:`omkafka-examples-label` section for details. + + +Broker +^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "array", "localhost:9092", "no", "none" + +Specifies the broker(s) to use. + + +Topic +^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "none", "yes", "none" + +Specifies the topic to produce to. + + +Key +^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "none", "no", "none" + +Kafka key to be used for all messages. + +If a key is provided and partitions.auto="on" is set, then all messages will +be assigned to a partition based on the key. + + +DynaKey +^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive", "Available since" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none", v8.1903 + +If set, the key parameter becomes a template for the key to base the +partitioning on. + + +DynaTopic +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +If set, the topic parameter becomes a template for which topic to +produce messages to. The cache is cleared on HUP. + + +DynaTopic.Cachesize +^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "50", "no", "none" + +If set, defines the number of topics that will be kept in the dynatopic +cache. + + +Partitions.Auto +^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +Librdkafka provides an automatic partitioning function that will +automatically distribute the produced messages into all partitions +configured for that topic. + +To use, set partitions.auto="on". This is instead of specifying the +number of partitions on the producer side, where it would be easier +to change the kafka configuration on the cluster for number of +partitions/topic vs on every machine talking to Kafka via rsyslog. + +If no key is set, messages will be distributed randomly across partitions. +This results in a very even load on all partitions, but does not preserve +ordering between the messages. + +If a key is set, a partition will be chosen automatically based on it. All +messages with the same key will be sorted into the same partition, +preserving their ordering. For example, by setting the key to the hostname, +messages from a specific host will be written to one partition and ordered, +but messages from different nodes will be distributed across different +partitions. This distribution is essentially random, but stable. If the +number of different keys is much larger than the number of partitions on the +topic, load will be distributed fairly evenly. + +If set, it will override any other partitioning scheme configured. + + +Partitions.number +^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "none", "no", "none" + +If set, specifies how many partitions exists **and** activates +load-balancing among them. Messages are distributed more or +less evenly between the partitions. Note that the number specified +must be correct. Otherwise, some errors may occur or some partitions +may never receive data. + + +Partitions.useFixed +^^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "none", "no", "none" + +If set, specifies the partition to which data is produced. All +data goes to this partition, no other partition is ever involved +for this action. + + +errorFile +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "none", "no", "none" + +If set, messages that could not be sent and caused an error +messages are written to the file specified. This file is in JSON +format, with a single record being written for each message in +error. The entry contains the full message, as well as Kafka +error number and reason string. + +The idea behind the error file is that the admin can periodically +run a script that reads the error file and reacts on it. Note that +the error file is kept open from when the first error occurred up +until rsyslog is terminated or received a HUP signal. + + +statsFile +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "none", "no", "none" + +If set, the contents of the JSON object containing the full librdkafka +statistics will be written to the file specified. The file will be +updated based on the statistics.interval.ms confparam value, which must +also be set. + + +ConfParam +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "array", "none", "no", "none" + +Permits to specify Kafka options. Rather than offering a myriad of +config settings to match the Kafka parameters, we provide this setting +here as a vehicle to set any Kafka parameter. This has the big advantage +that Kafka parameters that come up in new releases can immediately be used. + +Note that we use librdkafka for the Kafka connection, so the parameters +are actually those that librdkafka supports. As of our understanding, this +is a superset of the native Kafka parameters. + + +TopicConfParam +^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "array", "none", "no", "none" + +In essence the same as *confParam*, but for the Kafka topic. + + +Template +^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "template set via template module parameter", "no", "none" + +Sets the template to be used for this action. + + +closeTimeout +^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "2000", "no", "none" + +Sets the time to wait in ms (milliseconds) for draining messages submitted to kafka-handle +(provided by librdkafka) before closing it. + +The maximum value of closeTimeout used across all omkafka action instances +is used as librdkafka unload-timeout while unloading the module +(for shutdown, for instance). + + +resubmitOnFailure +^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +.. versionadded:: 8.28.0 + +If enabled, failed messages will be resubmit automatically when kafka is able to send +messages again. To prevent message loss, this option should be enabled. + +**Note:** Messages that are rejected by kafka due to exceeding the maximum configured +message size, are automatically dropped. These errors are not retriable. + +KeepFailedMessages +^^^^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "binary", "off", "no", "none" + +If enabled, failed messages will be saved and loaded on shutdown/startup and resend after startup if +the kafka server is able to receive messages again. This setting requires resubmitOnFailure to be enabled as well. + + +failedMsgFile +^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "none", "no", "none" + +.. versionadded:: 8.28.0 + +Filename where the failed messages should be stored into. +Needs to be set when keepFailedMessages is enabled, otherwise failed messages won't be saved. + + +statsName +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "word", "none", "no", "none" + +.. versionadded:: 8.2108.0 + +The name assigned to statistics specific to this action instance. The supported set of +statistics tracked for this action instance are **submitted**, **acked**, **failures**. +See the :ref:`statistics-counter_label` section for more details. + + +.. _statistics-counter_label: + +Statistic Counter +================= + +This plugin maintains global :doc:`statistics <../rsyslog_statistic_counter>` for omkafka that +accumulate all action instances. The statistic origin is named "omafka" with following counters: + +- **submitted** - number of messages submitted to omkafka for processing (with both acknowledged + deliveries to broker as well as failed or re-submitted from omkafka to librdkafka). + +- **maxoutqsize** - high water mark of output queue size. + +- **failures** - number of messages that librdkafka failed to deliver. This number is + broken down into counts of various types of failures. + +- **topicdynacache.skipped** - count of dynamic topic cache lookups that find an existing topic and + skip creating a new one. + +- **topicdynacache.miss** - count of dynamic topic cache lookups that fail to find an existing topic + and end up creating new ones. + +- **topicdynacache.evicted** - count of dynamic topic cache entry evictions. + +- **acked** - count of messages that were acknowledged by kafka broker. Note that + kafka broker provides two levels of delivery acknowledgements depending on topicConfParam: + default (acks=1) implies delivery to the leader only while acks=-1 implies delivery to leader + as well as replication to all brokers. + +- **failures_msg_too_large** - count of messages dropped by librdkafka when it failed to + deliver to the broker because broker considers message to be too large. Note that + omkafka may still resubmit to librdkafka depending on resubmitOnFailure option. + +- **failures_unknown_topic** - count of messages dropped by librdkafka when it failed to + deliver to the broker because broker does not recognize the topic. + +- **failures_queue_full** - count of messages dropped by librdkafka when its queue becomes + full. Note that default size of librdkafka queue is 100,000 messages. + +- **failures_unknown_partition** - count of messages that librdkafka failed to deliver because + broker does not recognize a partition. + +- **failures_other** - count of all of the rest of the failures that do not fall in any of + the above failure categories. + +- **errors_timed_out** - count of messages that librdkafka could not deliver within timeout. These + errors will cause action to be suspended but messages can be retried depending on retry options. + +- **errors_transport** - count of messages that librdkafka could not deliver due to transport errors. + These messages can be retried depending on retry options. + +- **errors_broker_down** - count of messages that librdkafka could not deliver because it thinks that + broker is not accessible. These messages can be retried depending on options. + +- **errors_auth** - count of messages that librdkafka could not deliver due to authentication errors. + These messages can be retried depending on the options. + +- **errors_ssl** - count of messages that librdkafka could not deliver due to ssl errors. + These messages can be retried depending on the options. + +- **errors_other** - count of rest of librdkafka errors. + +- **rtt_avg_usec** - broker round trip time in microseconds averaged over all brokers. It is based + on the statistics callback window specified through statistics.interval.ms parameter to librdkafka. + Average exclude brokers with less than 100 microseconds rtt. + +- **throttle_avg_msec** - broker throttling time in milliseconds averaged over all brokers. This is + also a part of window statistics delivered by librdkakfka. Average excludes brokers with zero throttling time. + +- **int_latency_avg_usec** - internal librdkafka producer queue latency in microseconds averaged other + all brokers. This is also part of window statistics and average excludes brokers with zero internal latency. + +Note that three window statics counters are not safe with multiple clients. When statistics callback is +enabled, for example, by using statics.callback.ms=60000, omkafa will generate an internal log message every +minute for the corresponding omkafka action: + +.. code-block:: none + + 2018-03-31T01:51:59.368491+00:00 app1-1.example.com rsyslogd: statscb_window_stats: + handler_name=collections.rsyslog.core#producer-1 replyq=0 msg_cnt=30 msg_size=37986 msg_max=100000 + msg_size_max=1073741824 rtt_avg_usec=41475 throttle_avg_msec=0 int_latency_avg_usec=2943224 [v8.32.0] + +For multiple actions using statistics callback, there will be one such record for each action after specified +window period. See https://github.com/edenhill/librdkafka/wiki/Statistics for more details on statistics +callback values. + +Examples +======== + +.. _omkafka-examples-label: + +Using Array Type Parameter +-------------------------- + +Set a single value +^^^^^^^^^^^^^^^^^^ + +For example, to select "snappy" compression, you can use: + +.. code-block:: none + + action(type="omkafka" topic="mytopic" confParam="compression.codec=snappy") + + +which is equivalent to: + +.. code-block:: none + + action(type="omkafka" topic="mytopic" confParam=["compression.codec=snappy"]) + + +Set multiple values +^^^^^^^^^^^^^^^^^^^ + +To specify multiple values, just use the bracket notation and create a +comma-delimited list of values as shown here: + +.. code-block:: none + + action(type="omkafka" topic="mytopic" + confParam=["compression.codec=snappy", + "socket.timeout.ms=5", + "socket.keepalive.enable=true"] + ) + + |