summaryrefslogtreecommitdiffstats
path: root/source/development/dev_queue.rst
diff options
context:
space:
mode:
Diffstat (limited to '')
-rw-r--r--source/development/dev_queue.rst299
1 files changed, 299 insertions, 0 deletions
diff --git a/source/development/dev_queue.rst b/source/development/dev_queue.rst
new file mode 100644
index 0000000..fb5a286
--- /dev/null
+++ b/source/development/dev_queue.rst
@@ -0,0 +1,299 @@
+The rsyslog queue object
+========================
+
+This page reflects the status as of 2008-01-17. The documentation is
+still incomplete. Target audience is developers and users who would like
+to get an in-depth understanding of queues as used in
+`rsyslog <http://www.rsyslog.com/>`_.
+
+**Please note that this document is outdated and does not longer reflect
+the specifics of the queue object. However, I have decided to leave it
+in the doc set, as the overall picture provided still is quite OK. I
+intend to update this document somewhat later when I have reached the
+"store-and-forward" milestone.**
+
+Some definitions
+----------------
+
+A queue is DA-enabled if it is configured to use disk-assisted mode when
+there is need to. A queue is in DA mode (or DA run mode), when it
+actually runs disk assisted.
+
+Implementation Details
+----------------------
+
+Disk-Assisted Mode
+~~~~~~~~~~~~~~~~~~
+
+Memory-Type queues may utilize disk-assisted (DA) mode. DA mode is
+enabled whenever a queue file name prefix is provided. This is called
+DA-enabled mode. If DA-enabled, the queue operates as a regular memory
+queue until a high water mark is reached. If that happens, the queue
+activates disk assistance (called "runs disk assisted" or "runs DA" -
+you can find that often in source file comments). To do so, it creates a
+helper queue instance (the DA queue). At that point, there are two
+queues running - the primary queue's consumer changes to a
+shuffle-to-DA-queue consumer and the original primary consumer is
+assigned to the DA queue. Existing and new messages are spooled to the
+disk queue, where the DA worker takes them from and passes them for
+execution to the actual consumer. In essence, the primary queue has now
+become a memory buffer for the DA queue. The primary queue will be
+drained until a low water mark is reached. At that point, processing is
+held. New messages enqueued to the primary queue will not be processed
+but kept in memory. Processing resumes when either the high water mark
+is reached again or the DA queue indicates it is empty. If the DA queue
+is empty, it is shut down and processing of the primary queue continues
+as a regular in-memory queue (aka "DA mode is shut down"). The whole
+thing iterates once the high water mark is hit again.
+
+There is one special case: if the primary queue is shut down and could
+not finish processing all messages within the configured timeout
+periods, the DA queue is instantiated to take up the remaining messages.
+These will be preserved and be processed during the next run. During
+that period, the DA queue runs in "enqueue-only" mode and does not
+execute any consumer. Draining the primary queue is typically very fast.
+If that behaviour is not desired, it can be turned of via parameters. In
+that case, any remaining in-memory messages are lost.
+
+Due to the fact that when running DA two queues work closely together
+and worker threads (including the DA worker) may shut down at any time
+(due to timeout), processing synchronization and startup and shutdown is
+somewhat complex. I'll outline the exact conditions and steps down here.
+I also do this so that I know clearly what to develop to, so please be
+patient if the information is a bit too in-depth ;)
+
+DA Run Mode Initialization
+~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+Three cases:
+
+#. any time during queueEnqObj() when the high water mark is hit
+#. at queue startup if there is an on-disk queue present (presence of QI
+ file indicates presence of queue data)
+#. at queue shutdown if remaining in-memory data needs to be persisted
+ to disk
+
+In **case 1**, the worker pool is running. When switching to DA mode,
+all regular workers are sent termination commands. The DA worker is
+initiated. Regular workers may run in parallel to the DA worker until
+they terminate. Regular workers shall terminate as soon as their current
+consumer has completed. They shall not execute the DA consumer.
+
+In **case 2**, the worker pool is not yet running and is NOT started.
+The DA worker is initiated.
+
+In **case 3**, the worker pool is already shut down. The DA worker is
+initiated. The DA queue runs in enqueue-only mode.
+
+In all cases, the DA worker starts up and checks if DA mode is already
+fully initialized. If not, it initializes it, what most importantly
+means construction of the queue.
+
+Then, regular worker processing is carried out. That is, the queue
+worker will wait on empty queue and terminate after an timeout. However,
+If any message is received, the DA consumer is executed. That consumer
+checks the low water mark. If the low water mark is reached, it stops
+processing until either the high water mark is reached again or the DA
+queue indicates it is empty (there is a pthread\_cond\_t for this
+synchronization).
+
+In theory, a **case-2** startup could lead to the worker becoming
+inactive and terminating while waiting on the primary queue to fill. In
+practice, this is highly unlikely (but only for the main message queue)
+because rsyslog issues a startup message. HOWEVER, we can not rely on
+that, it would introduce a race. If the primary rsyslog thread (the one
+that issues the message) is scheduled very late and there is a low
+inactivity timeout for queue workers, the queue worker may terminate
+before the startup message is issued. And if the on-disk queue holds
+only a few messages, it may become empty before the DA worker is
+re-initiated again. So it is possible that the DA run mode termination
+criteria occurs while no DA worker is running on the primary queue.
+
+In cases 1 and 3, the DA worker can never become inactive without
+hitting the DA shutdown criteria. In **case 1**, it either shuffles
+messages from the primary to the DA queue or it waits because it has the
+hit low water mark.
+
+In **case 3**, it always shuffles messages between the queues (because,
+that's the sole purpose of that run). In order for this to happen, the
+high water mark has been set to the value of 1 when DA run mode has been
+initialized. This ensures that the regular logic can be applied to drain
+the primary queue. To prevent a hold due to reaching the low water mark,
+that mark must be changed to 0 before the DA worker starts.
+
+DA Run Mode Shutdown
+~~~~~~~~~~~~~~~~~~~~
+
+In essence, DA run mode is terminated when the DA queue is empty and the
+primary worker queue size is below the high water mark. It is also
+terminated when the primary queue is shut down. The decision to switch
+back to regular (non-DA) run mode is typically made by the DA worker. If
+it switches, the DA queue is destructed and the regular worker pool is
+restarted. In some cases, the queue shutdown process may initiate the
+"switch" (in this case more or less a clean shutdown of the DA queue).
+
+One might think that it would be more natural for the DA queue to detect
+being idle and shut down itself. However, there are some issues
+associated with that. Most importantly, all queue worker threads need to
+be shut down during queue destruction. Only after that has happened,
+final destruction steps can happen (else we would have a myriad of
+races). However, it is the DA queues worker thread that detects it is
+empty (empty queue detection always happens at the consumer side and
+must so). That would lead to the DA queue worker thread to initiate DA
+queue destruction which in turn would lead to that very same thread
+being canceled (because workers must shut down before the queue can be
+destructed). Obviously, this does not work out (and I didn't even
+mention the other issues - so let's forget about it). As such, the
+thread that enqueues messages must destruct the queue - and that is the
+primary queue's DA worker thread.
+
+There are some subtleties due to thread synchronization and the fact
+that the DA consumer may not be running (in a **case-2 startup**). So it
+is not trivial to reliably change the queue back from DA run mode to
+regular run mode. The priority is a clean switch. We accept the fact
+that there may be situations where we cleanly shut down DA run mode,
+just to re-enable it with the very next message being enqueued. While
+unlikely, this will happen from time to time and is considered perfectly
+legal. We can't predict the future and it would introduce too great
+complexity to try to do something against that (that would most probably
+even lead to worse performance under regular conditions).
+
+The primary queue's DA worker thread may wait at two different places:
+
+#. after reaching the low water mark and waiting for either high water
+ or DA queue empty
+#. at the regular pthread\_cond\_wait() on an empty primary queue
+
+Case 2 is unlikely, but may happen (see info above on a case 2 startup).
+
+**The DA worker may also not wait at all,** because it is actively
+executing and shuffling messages between the queues. In that case,
+however, the program flow passes both of the two wait conditions but
+simply does not wait.
+
+**Finally, the DA worker may be inactive**\ (again, with a case-2
+startup). In that case no work(er) at all is executed. Most importantly,
+without the DA worker being active, nobody will ever detect the need to
+change back to regular mode. If we have this situation, the very next
+message enqueued will cause the switch, because then the DA run mode
+shutdown criteria is met. However, it may take close to eternal for this
+message to arrive. During that time, disk and memory resources for the
+DA queue remain allocated. This also leaves processing in a sub-optimal
+state and it may take longer than necessary to switch back to regular
+queue mode when a message burst happens. In extreme cases, this could
+even lead to shutdown of DA run mode, which takes so long that the high
+water mark is passed and DA run mode is immediately re-initialized -
+while with an immediate switch, the message burst may have been able to
+be processed by the in-memory queue without DA support.
+
+So in short, it is desirable switch to regular run mode as soon as
+possible. To do this, we need an active DA worker. The easy solution is
+to initiate DA worker startup from the DA queue's worker once it detects
+empty condition. To do so, the DA queue's worker must call into a "*DA
+worker startup initiation*\ " routine inside the main queue. As a
+reminder, the DA worker will most probably not receive the "DA queue
+empty" signal in that case, because it will be long sent (in most cases)
+before the DA worker even waits for it. So **it is vital that DA run
+mode termination checks be done in the DA worker before it goes into any
+wait condition**.
+
+Please note that the "*DA worker startup initiation*\ " routine may be
+called concurrently from multiple initiators. **To prevent a race, it
+must be guarded by the queue mutex**\ and return without any action (and
+no error code!) if the DA worker is already initiated.
+
+All other cases can be handled by checking the termination criteria
+immediately at the start of the worker and then once again for each run.
+The logic follows this simplified flow diagram:
+
+.. |image0| image:: queueWorkerLogic.jpg
+
+Some of the more subtle aspects of worker processing (e.g. enqueue
+thread signaling and other fine things) have been left out in order to
+get the big picture. What is called "check DA mode switchback..." right
+after "worker init" is actually a check for the worker's termination
+criteria. Typically, **the worker termination criteria is a shutdown
+request**. However, **for a DA worker, termination is also requested if
+the queue size is below the high water mark AND the DA queue is empty**.
+There is also a third termination criteria and it is not even on the
+chart: that is the inactivity timeout, which exists in all modes. Note
+that while the inactivity timeout shuts down a thread, it logically does
+not terminate the worker pool (or DA worker): workers are restarted on
+an as-needed basis. However, inactivity timeouts are very important
+because they require us to restart workers in some situations where we
+may expect a running one. So always keep them on your mind.
+
+Queue Destruction
+~~~~~~~~~~~~~~~~~
+
+Now let's consider **the case of destruction of the primary
+queue.**\ During destruction, our focus is on loosing as few messages as
+possible. If the queue is not DA-enabled, there is nothing but the
+configured timeouts to handle that situation. However, with a DA-enabled
+queue there are more options.
+
+If the queue is DA-enabled, it may be *configured to persist messages to
+disk before it is terminated*. In that case, loss of messages never
+occurs (at the price of a potentially lengthy shutdown). Even if that
+setting is not applied, the queue should drain as many messages as
+possible to the disk. For that reason, it makes no sense to wait on a
+low water mark. Also, if the queue is already in DA run mode, it does
+not make any sense to switch back to regular run mode during termination
+and then try to process some messages via the regular consumer. It is
+much more appropriate the try completely drain the queue during the
+remaining timeout period. For the same reason, it is preferred that no
+new consumers be activated (via the DA queue's worker), as they only
+cost valuable CPU cycles and, more importantly, would potentially be
+long(er)-running and possibly be needed to be cancelled. To prevent all
+of that, **queue parameters are changed for DA-enabled queues:** the
+high water mark is to 1 and the low water mark to 0 on the primary
+queue. The DA queue is commanded to run in enqueue-only mode. If the
+primary queue is *configured to persist messages to disk before it is
+terminated*, its SHUTDOWN timeout is changed to to eternal. These
+parameters will cause the queue to drain as much as possible to disk
+(and they may cause a case 3 DA run mode initiation). Please note that
+once the primary queue has been drained, the DA queue's worker will
+automatically switch back to regular (non-DA) run mode. **It must be
+ensured that no worker cancellation occurs during that switchback**.
+Please note that the queue may not switch back to regular run mode if it
+is not *configured to persist messages to disk before it is terminated*.
+In order to apply the new parameters, **worker threads must be
+awakened.** Remember we may not be in DA run mode at this stage. In that
+case, the regular workers must be awakened, which then will switch to DA
+run mode. No worker may be active, in that case one must be initiated.
+If in DA run mode and the DA worker is inactive, theĀ  "*DA worker
+startup initiation*\ " must be called to activate it. That routine
+ensures only one DA worker is started even with multiple concurrent
+callers - this may be the case here. The DA queue's worker may have
+requested DA worker startup in order to terminate on empty queue (which
+will probably not be honored as we have changed the low water mark).
+
+After all this is done, the queue destructor requests termination of the
+queue's worker threads. It will use the normal timeouts and potentially
+cancel too-long running worker threads. **The shutdown process must
+ensure that all workers reach running state before they are commanded to
+terminate**. Otherwise it may run into a race condition that could lead
+to a false shutdown with workers running asynchronously. As a few
+workers may have just been started to initialize (to apply new parameter
+settings), the probability for this race condition is extremely high,
+especially on single-CPU systems.
+
+After all workers have been shut down (or cancelled), the queue may
+still be in DA run mode. If so, this must be terminated, which now can
+simply be done by destructing the DA queue object. This is not a real
+switchback to regular run mode, but that doesn't matter because the
+queue object will soon be gone away.
+
+Finally, the queue is mostly shut down and ready to be actually
+destructed. As a last try, the queuePersists() entry point is called. It
+is used to persists a non-DA-enabled queue in whatever way is possible
+for that queue. There may be no implementation for the specific queue
+type. Please note that this is not just a theoretical construct. This is
+an extremely important code path when the DA queue itself is destructed.
+Remember that it is a queue object in its own right. The DA queue is
+obviously not DA-enabled, so it calls into queuePersists() during its
+destruction - this is what enables us to persist the disk queue!
+
+After that point, left over queue resources (mutexes, dynamic memory,
+...) are freed and the queue object is actually destructed.
+