From f7f20c3f5e0be02585741f5f54d198689ccd7866 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Mon, 15 Apr 2024 18:27:18 +0200 Subject: Adding upstream version 8.2402.0+dfsg. Signed-off-by: Daniel Baumann --- source/configuration/modules/omsnmp.rst | 265 ++++++++++++++++++++++++++++++++ 1 file changed, 265 insertions(+) create mode 100644 source/configuration/modules/omsnmp.rst (limited to 'source/configuration/modules/omsnmp.rst') diff --git a/source/configuration/modules/omsnmp.rst b/source/configuration/modules/omsnmp.rst new file mode 100644 index 0000000..ba283f5 --- /dev/null +++ b/source/configuration/modules/omsnmp.rst @@ -0,0 +1,265 @@ +******************************* +omsnmp: SNMP Trap Output Module +******************************* + +=========================== =========================================================================== +**Module Name:**  **omsnmp** +**Author:** Andre Lorbach +=========================== =========================================================================== + + +Purpose +======= + +Provides the ability to send syslog messages as an SNMPv1 & v2c traps. +By default, SNMPv2c is preferred. The syslog message is wrapped into a +OCTED STRING variable. This module uses the +`NET-SNMP `_ library. In order to +compile this module, you will need to have the +`NET-SNMP `_ developer (headers) +package installed. + + +Configuration Parameters +======================== + +.. note:: + + Parameter names are case-insensitive. + +Action Parameters +----------------- + +Server +^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "none", "yes", "``$actionsnmptarget``" + +This can be a hostname or ip address, and is our snmp target host. +This parameter is required, if the snmptarget is not defined, nothing +will be send. + + +Port +^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "162", "no", "``$actionsnmptargetport``" + +The port which will be used, common values are port 162 or 161. + + +Transport +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "udp", "no", "``$actionsnmptransport``" + +Defines the transport type you wish to use. Technically we can +support all transport types which are supported by NET-SNMP. +To name a few possible values: +udp, tcp, udp6, tcp6, icmp, icmp6 ... + + +Version +^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "1", "no", "``$actionsnmpversion``" + +There can only be two choices for this parameter for now. +0 means SNMPv1 will be used. +1 means SNMPv2c will be used. +Any other value will default to 1. + + +Community +^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "public", "no", "``$actionsnmpcommunity``" + +This sets the used SNMP Community. + + +TrapOID +^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "1.3.6.1.4.1.19406.1.2.1", "no", "``$actionsnmptrapoid``" + +The default value means "ADISCON-MONITORWARE-MIB::syslogtrap". + +This configuration parameter is used for **SNMPv2** only. +This is the OID which defines the trap-type, or notification-type +rsyslog uses to send the trap. +In order to decode this OID, you will need to have the +ADISCON-MONITORWARE-MIB and ADISCON-MIB mibs installed on the +receiver side. Downloads of these mib files can be found here: + +`http://www.adiscon.org/download/ADISCON-MIB.txt `_ + +`http://www.adiscon.org/download/ADISCON-MONITORWARE-MIB.txt `_ +Thanks to the net-snmp mailinglist for the help and the +recommendations ;). + + +MessageOID +^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "1.3.6.1.4.1.19406.1.2.1", "no", "``$actionsnmpsyslogmessageoid``" + +This OID will be used as a variable, type "OCTET STRING". This +variable will contain up to 255 characters of the original syslog +message including syslog header. It is recommend to use the default +OID. +In order to decode this OID, you will need to have the +ADISCON-MONITORWARE-MIB and ADISCON-MIB mibs installed on the +receiver side. To download these custom mibs, see the description of +**TrapOID**. + + +EnterpriseOID +^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "1.3.6.1.4.1.3.1.1", "no", "``$actionsnmpenterpriseoid``" + +The default value means "enterprises.cmu.1.1" + +Customize this value if needed. I recommend to use the default value +unless you require to use a different OID. +This configuration parameter is used for **SNMPv1** only. It has no +effect if **SNMPv2** is used. + + +SpecificType +^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "0", "no", "``$actionsnmpspecifictype``" + +This is the specific trap number. This configuration parameter is +used for **SNMPv1** only. It has no effect if **SNMPv2** is used. + + +Snmpv1DynSource +^^^^^^^^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "string", "", "no", "none" + +.. versionadded:: 8.2001 + +If set, the source field of the SNMP trap can be overwritten with the a +template. The internal default is "%fromhost-ip%". The result should be a +valid IPv4 Address. Otherwise setting the source will fail. + +Below is a sample template called "dynsource" which you canm use to set the +source to a custom property: + +.. code-block:: none + + set $!custom_host = $fromhost; + template(name="dynsource" type="list") { + property(name="$!custom_host") + } + + +This configuration parameter is used for **SNMPv1** only. +It has no effect if **SNMPv2** is used. + + +TrapType +^^^^^^^^ + +.. csv-table:: + :header: "type", "default", "mandatory", "|FmtObsoleteName| directive" + :widths: auto + :class: parameter-table + + "integer", "6", "no", "``$actionsnmptraptype``" + +There are only 7 Possible trap types defined which can be used here. +These trap types are: + +.. code-block:: none + + 0 = SNMP_TRAP_COLDSTART + 1 = SNMP_TRAP_WARMSTART + 2 = SNMP_TRAP_LINKDOWN + 3 = SNMP_TRAP_LINKUP + 4 = SNMP_TRAP_AUTHFAIL + 5 = SNMP_TRAP_EGPNEIGHBORLOSS + 6 = SNMP_TRAP_ENTERPRISESPECIFIC + +.. note:: + + Any other value will default to 6 automatically. This configuration + parameter is used for **SNMPv1** only. It has no effect if **SNMPv2** + is used. + + +Caveats/Known Bugs +================== + +- In order to decode the custom OIDs, you will need to have the adiscon + mibs installed. + + +Examples +======== + +Sending messages as snmp traps +------------------------------ + +The following commands send every message as a snmp trap. + +.. code-block:: none + + module(load="omsnmp") + action(type="omsnmp" server="localhost" port="162" transport="udp" + version="1" community="public") + -- cgit v1.2.3