Adding upstream version 8.2402.0.upstream/8.2402.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 239 insertions, 0 deletions

diff --git a/runtime/zlibw.c b/runtime/zlibw.c
new file mode 100644
index 0000000..77fd2e7
--- /dev/null
+++ b/runtime/zlibw.c
@@ -0,0 +1,239 @@
+/* The zlibwrap object.
+ *
+ * This is an rsyslog object wrapper around zlib.
+ *
+ * Copyright 2009-2022 Rainer Gerhards and Adiscon GmbH.
+ *
+ * This file is part of the rsyslog runtime library.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *       http://www.apache.org/licenses/LICENSE-2.0
+ *       -or-
+ *       see COPYING.ASL20 in the source distribution
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "config.h"
+#include <string.h>
+#include <assert.h>
+#include <zlib.h>
+
+#include "rsyslog.h"
+#include "module-template.h"
+#include "obj.h"
+#include "stream.h"
+#include "zlibw.h"
+
+MODULE_TYPE_LIB
+MODULE_TYPE_NOKEEP
+
+/* static data */
+DEFobjStaticHelpers
+
+
+/* ------------------------------ methods ------------------------------ */
+
+/* zlib make strong use of macros for its interface functions, so we can not simply
+ * pass function pointers to them. Instead, we create very small wrappers which call
+ * the relevant entry points.
+ */
+
+static int myDeflateInit(z_streamp strm, int level)
+{
+	return deflateInit(strm, level);
+}
+
+static int myDeflateInit2(z_streamp strm, int level, int method, int windowBits, int memLevel, int strategy)
+{
+	return deflateInit2(strm, level, method, windowBits, memLevel, strategy);
+}
+
+static int myDeflateEnd(z_streamp strm)
+{
+	return deflateEnd(strm);
+}
+
+static int myDeflate(z_streamp strm, int flush)
+{
+	return deflate(strm, flush);
+}
+
+/* finish zlib buffer */
+static rsRetVal
+doCompressFinish(strm_t *pThis,
+		rsRetVal (*strmPhysWrite)(strm_t *pThis, uchar *pBuf, size_t lenBuf) )
+{
+	int zRet;	/* zlib return state */
+	DEFiRet;
+	unsigned outavail;
+	assert(pThis != NULL);
+
+	assert(pThis->compressionDriver == STRM_COMPRESS_ZIP);
+
+	if(!pThis->bzInitDone)
+		goto done;
+
+	pThis->zstrm.avail_in = 0;
+	/* run deflate() on buffer until everything has been compressed */
+	do {
+		DBGPRINTF("in deflate() loop, avail_in %d, total_in %ld\n", pThis->zstrm.avail_in,
+			pThis->zstrm.total_in);
+		pThis->zstrm.avail_out = pThis->sIOBufSize;
+		pThis->zstrm.next_out = pThis->pZipBuf;
+		zRet = deflate(&pThis->zstrm, Z_FINISH);    /* no bad return value */
+		DBGPRINTF("after deflate, ret %d, avail_out %d\n", zRet, pThis->zstrm.avail_out);
+		outavail = pThis->sIOBufSize - pThis->zstrm.avail_out;
+		if(outavail != 0) {
+			CHKiRet(strmPhysWrite(pThis, (uchar*)pThis->pZipBuf, outavail));
+		}
+	} while (pThis->zstrm.avail_out == 0);
+
+finalize_it:
+	zRet = deflateEnd(&pThis->zstrm);
+	if(zRet != Z_OK) {
+		LogError(0, RS_RET_ZLIB_ERR, "error %d returned from zlib/deflateEnd()", zRet);
+	}
+
+	pThis->bzInitDone = 0;
+done:	RETiRet;
+}
+
+/* write the output buffer in zip mode
+ * This means we compress it first and then do a physical write.
+ * Note that we always do a full deflateInit ... deflate ... deflateEnd
+ * sequence. While this is not optimal, we need to do it because we need
+ * to ensure that the file is readable even when we are aborted. Doing the
+ * full sequence brings us as far towards this goal as possible (and not
+ * doing it would be a total failure). It may be worth considering to
+ * add a config switch so that the user can decide the risk he is ready
+ * to take, but so far this is not yet implemented (not even requested ;)).
+ * rgerhards, 2009-06-04
+ */
+static rsRetVal
+doStrmWrite(strm_t *pThis, uchar *pBuf, size_t lenBuf, const int bFlush,
+		rsRetVal (*strmPhysWrite)(strm_t *pThis, uchar *pBuf, size_t lenBuf) )
+{
+	int zRet;	/* zlib return state */
+	DEFiRet;
+	unsigned outavail = 0;
+	assert(pThis != NULL);
+	assert(pBuf != NULL);
+
+	assert(pThis->compressionDriver == STRM_COMPRESS_ZIP);
+
+	if(!pThis->bzInitDone) {
+		/* allocate deflate state */
+		pThis->zstrm.zalloc = Z_NULL;
+		pThis->zstrm.zfree = Z_NULL;
+		pThis->zstrm.opaque = Z_NULL;
+		/* see note in file header for the params we use with deflateInit2() */
+		zRet = deflateInit2(&pThis->zstrm, pThis->iZipLevel, Z_DEFLATED, 31, 9, Z_DEFAULT_STRATEGY);
+		if(zRet != Z_OK) {
+			LogError(0, RS_RET_ZLIB_ERR, "error %d returned from zlib/deflateInit2()", zRet);
+			ABORT_FINALIZE(RS_RET_ZLIB_ERR);
+		}
+		pThis->bzInitDone = RSTRUE;
+	}
+
+	/* now doing the compression */
+	pThis->zstrm.next_in = (Bytef*) pBuf;
+	pThis->zstrm.avail_in = lenBuf;
+	/* run deflate() on buffer until everything has been compressed */
+	do {
+		DBGPRINTF("in deflate() loop, avail_in %d, total_in %ld, bFlush %d\n",
+			pThis->zstrm.avail_in, pThis->zstrm.total_in, bFlush);
+		pThis->zstrm.avail_out = pThis->sIOBufSize;
+		pThis->zstrm.next_out = pThis->pZipBuf;
+		zRet = deflate(&pThis->zstrm, bFlush ? Z_SYNC_FLUSH : Z_NO_FLUSH);    /* no bad return value */
+		DBGPRINTF("after deflate, ret %d, avail_out %d, to write %d\n",
+			zRet, pThis->zstrm.avail_out, outavail);
+		if(zRet != Z_OK) {
+			LogError(0, RS_RET_ZLIB_ERR, "error %d returned from zlib/Deflate()", zRet);
+			ABORT_FINALIZE(RS_RET_ZLIB_ERR);
+		}
+		outavail = pThis->sIOBufSize - pThis->zstrm.avail_out;
+		if(outavail != 0) {
+			CHKiRet(strmPhysWrite(pThis, (uchar*)pThis->pZipBuf, outavail));
+		}
+	} while (pThis->zstrm.avail_out == 0);
+
+finalize_it:
+	if(pThis->bzInitDone && pThis->bVeryReliableZip) {
+		doCompressFinish(pThis, strmPhysWrite);
+	}
+	RETiRet;
+}
+/* destruction of caller's zlib ressources - a dummy for us */
+static rsRetVal
+zlib_Destruct(ATTR_UNUSED strm_t *pThis)
+{
+	return RS_RET_OK;
+}
+
+/* queryInterface function
+ * rgerhards, 2008-03-05
+ */
+BEGINobjQueryInterface(zlibw)
+CODESTARTobjQueryInterface(zlibw)
+	if(pIf->ifVersion != zlibwCURR_IF_VERSION) { /* check for current version, increment on each change */
+		ABORT_FINALIZE(RS_RET_INTERFACE_NOT_SUPPORTED);
+	}
+
+	/* ok, we have the right interface, so let's fill it
+	 * Please note that we may also do some backwards-compatibility
+	 * work here (if we can support an older interface version - that,
+	 * of course, also affects the "if" above).
+	 */
+	pIf->DeflateInit = myDeflateInit;
+	pIf->DeflateInit2 = myDeflateInit2;
+	pIf->Deflate     = myDeflate;
+	pIf->DeflateEnd  = myDeflateEnd;
+	pIf->doStrmWrite  = doStrmWrite;
+	pIf->doCompressFinish  = doCompressFinish;
+	pIf->Destruct  = zlib_Destruct;
+finalize_it:
+ENDobjQueryInterface(zlibw)
+
+
+/* Initialize the zlibw class. Must be called as the very first method
+ * before anything else is called inside this class.
+ * rgerhards, 2008-02-19
+ */
+BEGINAbstractObjClassInit(zlibw, 1, OBJ_IS_LOADABLE_MODULE) /* class, version */
+	/* request objects we use */
+
+	/* set our own handlers */
+ENDObjClassInit(zlibw)
+
+
+/* --------------- here now comes the plumbing that makes as a library module --------------- */
+
+
+BEGINmodExit
+CODESTARTmodExit
+ENDmodExit
+
+
+BEGINqueryEtryPt
+CODESTARTqueryEtryPt
+CODEqueryEtryPt_STD_LIB_QUERIES
+ENDqueryEtryPt
+
+
+BEGINmodInit()
+CODESTARTmodInit
+	*ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */
+
+	CHKiRet(zlibwClassInit(pModInfo)); /* must be done after tcps_sess, as we use it */
+	/* Initialize all classes that are in our module - this includes ourselfs */
+ENDmodInit
+/* vi:set ai:
+ */