Adding upstream version 8.2402.0.upstream/8.2402.0

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 448 insertions, 0 deletions

diff --git a/tools/ompipe.c b/tools/ompipe.c
new file mode 100644
index 0000000..a3c460f
--- /dev/null
+++ b/tools/ompipe.c
@@ -0,0 +1,448 @@
+/* ompipe.c
+ * This is the implementation of the build-in pipe output module.
+ * Note that this module stems back to the "old" (4.4.2 and below)
+ * omfile. There were some issues with the new omfile code and pipes
+ * (namely in regard to xconsole), so we took out the pipe code and moved
+ * that to a separate module. That a) immediately solves the issue for a
+ * less common use case and probably makes it much easier to enhance
+ * file and pipe support (now independently) in the future (we always
+ * needed to think about pipes in omfile so far, what we now no longer
+ * need to, hopefully resulting in reduction of complexity).
+ *
+ * NOTE: read comments in module-template.h to understand how this pipe
+ *       works!
+ *
+ * Copyright 2007-2018 Rainer Gerhards and Adiscon GmbH.
+ *
+ * This file is part of rsyslog.
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *       http://www.apache.org/licenses/LICENSE-2.0
+ *       -or-
+ *       see COPYING.ASL20 in the source distribution
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include "config.h"
+#include <stdio.h>
+#include <stdarg.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <string.h>
+#include <unistd.h>
+#include <assert.h>
+#include <errno.h>
+#include <fcntl.h>
+#include <unistd.h>
+#include <sys/file.h>
+
+#include "rsyslog.h"
+#include "syslogd.h"
+#include "syslogd-types.h"
+#include "srUtils.h"
+#include "template.h"
+#include "ompipe.h"
+#include "omfile.h" /* for dirty trick: access to $ActionFileDefaultTemplate value */
+#include "cfsysline.h"
+#include "module-template.h"
+#include "conf.h"
+#include "errmsg.h"
+
+MODULE_TYPE_OUTPUT
+MODULE_TYPE_NOKEEP
+MODULE_CNFNAME("ompipe")
+
+/* internal structures
+ */
+DEF_OMOD_STATIC_DATA
+
+
+typedef struct _instanceData {
+	uchar	*pipe;	/* pipe or template name (display only) */
+	uchar	*tplName;       /* format template to use */
+	short	fd;		/* pipe descriptor for (current) pipe */
+	pthread_mutex_t mutWrite; /* guard against multiple instances writing to same pipe */
+	sbool	bHadError;	/* did we already have/report an error on this pipe? */
+	sbool	bTryResumeReopen;	/* should we attempt to reopen the pipe on action resume? */
+} instanceData;
+
+typedef struct wrkrInstanceData {
+	instanceData *pData;
+} wrkrInstanceData_t;
+
+typedef struct configSettings_s {
+	EMPTY_STRUCT
+} configSettings_t;
+static configSettings_t __attribute__((unused)) cs;
+
+/* tables for interfacing with the v6 config system */
+/* module-global parameters */
+static struct cnfparamdescr modpdescr[] = {
+	{ "template", eCmdHdlrGetWord, 0 },
+};
+static struct cnfparamblk modpblk =
+	{ CNFPARAMBLK_VERSION,
+	  sizeof(modpdescr)/sizeof(struct cnfparamdescr),
+	  modpdescr
+	};
+
+/* action (instance) parameters */
+static struct cnfparamdescr actpdescr[] = {
+	{ "pipe", eCmdHdlrString, CNFPARAM_REQUIRED },
+	{ "template", eCmdHdlrGetWord, 0 },
+	{ "tryResumeReopen", eCmdHdlrBinary, 0 },
+};
+static struct cnfparamblk actpblk =
+	{ CNFPARAMBLK_VERSION,
+	  sizeof(actpdescr)/sizeof(struct cnfparamdescr),
+	  actpdescr
+	};
+
+struct modConfData_s {
+	rsconf_t *pConf;	/* our overall config object */
+	uchar 	*tplName;	/* default template */
+};
+
+static modConfData_t *loadModConf = NULL;/* modConf ptr to use for the current load process */
+static modConfData_t *runModConf = NULL;/* modConf ptr to use for the current exec process */
+
+/* this function gets the default template */
+static uchar*
+getDfltTpl(void)
+{
+	if(loadModConf != NULL && loadModConf->tplName != NULL)
+		return loadModConf->tplName;
+	else
+		return (uchar*)"RSYSLOG_FileFormat";
+}
+
+
+BEGINinitConfVars		/* (re)set config variables to default values */
+CODESTARTinitConfVars
+ENDinitConfVars
+
+
+BEGINisCompatibleWithFeature
+CODESTARTisCompatibleWithFeature
+	if(eFeat == sFEATURERepeatedMsgReduction)
+		iRet = RS_RET_OK;
+ENDisCompatibleWithFeature
+
+
+BEGINdbgPrintInstInfo
+CODESTARTdbgPrintInstInfo
+	dbgprintf("pipe %s", pData->pipe);
+	if (pData->fd == -1)
+		dbgprintf(" (unused)");
+ENDdbgPrintInstInfo
+
+
+/* This is now shared code for all types of files. It simply prepares
+ * pipe access, which, among others, means the the pipe wil be opened
+ * and any directories in between will be created (based on config, of
+ * course). -- rgerhards, 2008-10-22
+ * changed to iRet interface - 2009-03-19
+ */
+static rsRetVal
+preparePipe(instanceData *pData)
+{
+	DEFiRet;
+	pData->fd = open((char*) pData->pipe, O_RDWR|O_NONBLOCK|O_CLOEXEC);
+	if(pData->fd < 0 ) {
+		pData->fd = -1;
+		if(!pData->bHadError) {
+			LogError(errno, RS_RET_NO_FILE_ACCESS, "Could not open output pipe '%s':",
+				        pData->pipe);
+			pData->bHadError = 1;
+		}
+		DBGPRINTF("Error opening log pipe: %s\n", pData->pipe);
+	}
+	RETiRet;
+}
+
+
+/* rgerhards 2004-11-11: write to a pipe output. This
+ * will be called for all outputs using pipe semantics,
+ * for example also for pipes.
+ */
+static rsRetVal writePipe(uchar **ppString, instanceData *pData)
+{
+	int iLenWritten;
+	DEFiRet;
+
+	assert(pData != NULL);
+
+	if(pData->fd == -1) {
+		rsRetVal iRetLocal;
+		iRetLocal = preparePipe(pData);
+		if((iRetLocal != RS_RET_OK) || (pData->fd == -1))
+			ABORT_FINALIZE(RS_RET_SUSPENDED); /* whatever the failure was, we need to retry */
+	}
+
+	/* create the message based on format specified */
+	iLenWritten = write(pData->fd, ppString[0], strlen((char*)ppString[0]));
+	if(iLenWritten < 0) {
+		const int e = errno;
+		/* If a named pipe is full, we suspend this action for a while */
+		if(e == EAGAIN)
+			ABORT_FINALIZE(RS_RET_SUSPENDED);
+
+		close(pData->fd);
+		pData->fd = -1; /* tell that fd is no longer open! */
+		iRet = RS_RET_SUSPENDED;
+		LogError(e, NO_ERRCODE, "write error on pipe %s", pData->pipe);
+	}
+
+finalize_it:
+	RETiRet;
+}
+
+
+BEGINbeginCnfLoad
+CODESTARTbeginCnfLoad
+	loadModConf = pModConf;
+	pModConf->pConf = pConf;
+	pModConf->tplName = NULL;
+ENDbeginCnfLoad
+
+BEGINsetModCnf
+	struct cnfparamvals *pvals = NULL;
+	int i;
+CODESTARTsetModCnf
+	pvals = nvlstGetParams(lst, &modpblk, NULL);
+	if(pvals == NULL) {
+		LogError(0, RS_RET_MISSING_CNFPARAMS, "error processing module "
+				"config parameters [module(...)]");
+		ABORT_FINALIZE(RS_RET_MISSING_CNFPARAMS);
+	}
+
+	if(Debug) {
+		dbgprintf("module (global) param blk for ompipe:\n");
+		cnfparamsPrint(&modpblk, pvals);
+	}
+
+	for(i = 0 ; i < modpblk.nParams ; ++i) {
+		if(!pvals[i].bUsed)
+			continue;
+		if(!strcmp(modpblk.descr[i].name, "template")) {
+			loadModConf->tplName = (uchar*)es_str2cstr(pvals[i].val.d.estr, NULL);
+			if(pszFileDfltTplName != NULL) {
+				LogError(0, RS_RET_DUP_PARAM, "ompipe: warning: default template "
+						"was already set via legacy directive - may lead to inconsistent "
+						"results.");
+			}
+		} else {
+			dbgprintf("ompipe: program error, non-handled "
+			  "param '%s' in beginCnfLoad\n", modpblk.descr[i].name);
+		}
+	}
+finalize_it:
+	if(pvals != NULL)
+		cnfparamvalsDestruct(pvals, &modpblk);
+ENDsetModCnf
+
+BEGINendCnfLoad
+CODESTARTendCnfLoad
+	loadModConf = NULL; /* done loading */
+	/* free legacy config vars */
+	free(pszFileDfltTplName);
+	pszFileDfltTplName = NULL;
+ENDendCnfLoad
+
+BEGINcheckCnf
+CODESTARTcheckCnf
+ENDcheckCnf
+
+BEGINactivateCnf
+CODESTARTactivateCnf
+	runModConf = pModConf;
+ENDactivateCnf
+
+BEGINfreeCnf
+CODESTARTfreeCnf
+	free(pModConf->tplName);
+ENDfreeCnf
+
+BEGINcreateInstance
+CODESTARTcreateInstance
+	pData->pipe = NULL;
+	pData->fd = -1;
+	pData->bHadError = 0;
+	pData->bTryResumeReopen = 0;
+	pthread_mutex_init(&pData->mutWrite, NULL);
+ENDcreateInstance
+
+
+BEGINcreateWrkrInstance
+CODESTARTcreateWrkrInstance
+ENDcreateWrkrInstance
+
+
+BEGINfreeInstance
+CODESTARTfreeInstance
+	pthread_mutex_destroy(&pData->mutWrite);
+	free(pData->pipe);
+	if(pData->fd != -1)
+		close(pData->fd);
+ENDfreeInstance
+
+
+BEGINfreeWrkrInstance
+CODESTARTfreeWrkrInstance
+ENDfreeWrkrInstance
+
+
+BEGINtryResume
+	instanceData *__restrict__ const pData = pWrkrData->pData;
+	fd_set wrds;
+	struct timeval tv;
+	int ready;
+CODESTARTtryResume
+	if(pData->fd == -1) {
+		rsRetVal iRetLocal;
+		iRetLocal = preparePipe(pData);
+		if((iRetLocal != RS_RET_OK) || (pData->fd == -1))
+			ABORT_FINALIZE(RS_RET_SUSPENDED);
+	} else {
+		/* we can reach this if the pipe is full, so we need
+		 * to check if we can write again. /dev/xconsole is the
+		 * ugly example of why this is necessary.
+		 */
+		FD_ZERO(&wrds);
+		FD_SET(pData->fd, &wrds);
+		tv.tv_sec = 0;
+		tv.tv_usec = 0;
+		ready = select(pData->fd+1, NULL, &wrds, NULL, &tv);
+		DBGPRINTF("ompipe: tryResume: ready to write fd %d: %d\n", pData->fd, ready);
+		if(ready != 1) {
+			if(pData->bTryResumeReopen && pData->fd != -1) {
+				close(pData->fd);
+				pData->fd = -1;
+			}
+			ABORT_FINALIZE(RS_RET_SUSPENDED);
+		}
+	}
+finalize_it:
+ENDtryResume
+
+BEGINdoAction
+	instanceData *pData;
+CODESTARTdoAction
+	pData = pWrkrData->pData;
+	DBGPRINTF("ompipe: writing to %s\n", pData->pipe);
+	/* this module is single-threaded by nature */
+	pthread_mutex_lock(&pData->mutWrite);
+	iRet = writePipe(ppString, pData);
+	pthread_mutex_unlock(&pData->mutWrite);
+ENDdoAction
+
+
+static inline void
+setInstParamDefaults(instanceData *pData)
+{
+	pData->tplName = NULL;
+}
+
+BEGINnewActInst
+	struct cnfparamvals *pvals;
+	int i;
+CODESTARTnewActInst
+	if((pvals = nvlstGetParams(lst, &actpblk, NULL)) == NULL) {
+		ABORT_FINALIZE(RS_RET_MISSING_CNFPARAMS);
+	}
+
+	CHKiRet(createInstance(&pData));
+	setInstParamDefaults(pData);
+
+	CODE_STD_STRING_REQUESTnewActInst(1)
+	for(i = 0 ; i < actpblk.nParams ; ++i) {
+		if(!pvals[i].bUsed)
+			continue;
+		if(!strcmp(actpblk.descr[i].name, "pipe")) {
+			pData->pipe = (uchar*)es_str2cstr(pvals[i].val.d.estr, NULL);
+		} else if(!strcmp(actpblk.descr[i].name, "template")) {
+			pData->tplName = (uchar*)es_str2cstr(pvals[i].val.d.estr, NULL);
+		} else if(!strcmp(actpblk.descr[i].name, "tryResumeReopen")) {
+			pData->bTryResumeReopen = (int) pvals[i].val.d.n;
+		} else {
+			dbgprintf("ompipe: program error, non-handled "
+			  "param '%s'\n", actpblk.descr[i].name);
+		}
+	}
+
+	CHKiRet(OMSRsetEntry(*ppOMSR, 0, (uchar*)strdup((pData->tplName == NULL) ?
+						"RSYSLOG_FileFormat" : (char*)pData->tplName),
+						OMSR_NO_RQD_TPL_OPTS));
+CODE_STD_FINALIZERnewActInst
+	cnfparamvalsDestruct(pvals, &actpblk);
+ENDnewActInst
+
+BEGINparseSelectorAct
+CODESTARTparseSelectorAct
+	/* yes, the if below is redundant, but I need it now. Will go away as
+	 * the code further changes.  -- rgerhards, 2007-07-25
+	 */
+	if(*p == '|') {
+		if((iRet = createInstance(&pData)) != RS_RET_OK) {
+			return iRet; /* this can not use RET_iRet! */
+		}
+	} else {
+		/* this is not clean, but we need it for the time being
+		 * TODO: remove when cleaning up modularization
+		 */
+		return RS_RET_CONFLINE_UNPROCESSED;
+	}
+
+	CODE_STD_STRING_REQUESTparseSelectorAct(1)
+	CHKmalloc(pData->pipe = malloc(512));
+	++p;
+	CHKiRet(cflineParseFileName(p, (uchar*) pData->pipe, *ppOMSR, 0, OMSR_NO_RQD_TPL_OPTS,
+				       getDfltTpl()));
+
+CODE_STD_FINALIZERparseSelectorAct
+ENDparseSelectorAct
+
+
+BEGINdoHUP
+CODESTARTdoHUP
+	pthread_mutex_lock(&pData->mutWrite);
+	if(pData->fd != -1) {
+		close(pData->fd);
+		pData->fd = -1;
+	}
+	pthread_mutex_unlock(&pData->mutWrite);
+ENDdoHUP
+
+
+BEGINmodExit
+CODESTARTmodExit
+ENDmodExit
+
+
+BEGINqueryEtryPt
+CODESTARTqueryEtryPt
+CODEqueryEtryPt_STD_OMOD_QUERIES
+CODEqueryEtryPt_STD_OMOD8_QUERIES
+CODEqueryEtryPt_doHUP
+CODEqueryEtryPt_STD_CONF2_QUERIES
+CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES
+CODEqueryEtryPt_STD_CONF2_setModCnf_QUERIES
+CODEqueryEtryPt_STD_CONF2_OMOD_QUERIES
+ENDqueryEtryPt
+
+
+BEGINmodInit(Pipe)
+CODESTARTmodInit
+INITLegCnfVars
+	*ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */
+CODEmodInit_QueryRegCFSLineHdlr
+ENDmodInit
+/* vi:set ai:
+ */