diff options
Diffstat (limited to '')
| -rw-r--r-- | runtime/module-template.h | 1250 |
1 files changed, 1250 insertions, 0 deletions
diff --git a/runtime/module-template.h b/runtime/module-template.h new file mode 100644 index 0000000..9c9cbd1 --- /dev/null +++ b/runtime/module-template.h @@ -0,0 +1,1250 @@ +/* module-template.h + * This header contains macros that can be used to implement the + * plumbing of modules. + * + * File begun on 2007-07-25 by RGerhards + * + * Copyright 2007-2015 Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * -or- + * see COPYING.ASL20 in the source distribution + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ +#ifndef MODULE_TEMPLATE_H_INCLUDED +#define MODULE_TEMPLATE_H_INCLUDED 1 + +#include "modules.h" +#include "obj.h" +#include "objomsr.h" +#include "threads.h" + +/* macro to define standard output-module static data members + */ +#define DEF_MOD_STATIC_DATA \ + static __attribute__((unused)) rsRetVal (*omsdRegCFSLineHdlr)(uchar *pCmdName, int bChainingPermitted, \ + ecslCmdHdrlType eType, rsRetVal (*pHdlr)(), void *pData, void *pOwnerCookie); + +#define DEF_OMOD_STATIC_DATA \ + DEF_MOD_STATIC_DATA \ + DEFobjCurrIf(obj) \ + static __attribute__((unused)) int bCoreSupportsBatching; +#define DEF_IMOD_STATIC_DATA \ + DEF_MOD_STATIC_DATA \ + DEFobjCurrIf(obj) +#define DEF_LMOD_STATIC_DATA \ + DEF_MOD_STATIC_DATA +#define DEF_PMOD_STATIC_DATA \ + DEFobjCurrIf(obj) \ + DEF_MOD_STATIC_DATA +#define DEF_SMOD_STATIC_DATA \ + DEFobjCurrIf(obj) \ + DEF_MOD_STATIC_DATA +#define DEF_FMOD_STATIC_DATA \ + DEFobjCurrIf(obj) \ + DEF_MOD_STATIC_DATA + + +/* Macro to define the module type. Each module can only have a single type. If + * a module provides multiple types, several separate modules must be created which + * then should share a single library containing the majority of code. This macro + * must be present in each module. -- rgerhards, 2007-12-14 + * Note that MODULE_TYPE_TESTBENCH is reserved for testbenches, but + * declared in their own header files (because the rest does not need these + * defines). -- rgerhards, 2008-06-13 + */ +#define MODULE_TYPE(x)\ +static rsRetVal modGetType(eModType_t *modType) \ + { \ + *modType = x; \ + return RS_RET_OK;\ + } + +#define MODULE_TYPE_INPUT MODULE_TYPE(eMOD_IN) +#define MODULE_TYPE_OUTPUT MODULE_TYPE(eMOD_OUT) +#define MODULE_TYPE_PARSER MODULE_TYPE(eMOD_PARSER) +#define MODULE_TYPE_STRGEN MODULE_TYPE(eMOD_STRGEN) +#define MODULE_TYPE_FUNCTION MODULE_TYPE(eMOD_FUNCTION) +#define MODULE_TYPE_LIB \ + DEF_LMOD_STATIC_DATA \ + MODULE_TYPE(eMOD_LIB) + +/* Macro to define whether the module should be kept dynamically linked. + */ +#define MODULE_KEEP_TYPE(x)\ +static rsRetVal modGetKeepType(eModKeepType_t *modKeepType) \ + { \ + *modKeepType = x; \ + return RS_RET_OK;\ + } +#define MODULE_TYPE_NOKEEP MODULE_KEEP_TYPE(eMOD_NOKEEP) +#define MODULE_TYPE_KEEP MODULE_KEEP_TYPE(eMOD_KEEP) + +/* macro to define a unique module id. This must be able to fit in a void*. The + * module id must be unique inside a running rsyslogd application. It is used to + * track ownership of several objects. Most importantly, when the module is + * unloaded the module id value is used to find what needs to be destroyed. + * We currently use a pointer to modExit() as the module id. This sounds to be + * reasonable save, as each module must have this entry point AND there is no valid + * reason for twice this entry point being in memory. + * rgerhards, 2007-11-21 + */ +#define STD_LOADABLE_MODULE_ID ((void*) modExit) + + +/* macro to implement the "modGetID()" interface function + * rgerhards 2007-11-21 + */ +#define DEFmodGetID \ +static rsRetVal modGetID(void **pID) \ + { \ + *pID = STD_LOADABLE_MODULE_ID;\ + return RS_RET_OK;\ + } + +/* macro to provide the v6 config system module name + */ +#define MODULE_CNFNAME(name) \ +static rsRetVal modGetCnfName(uchar **cnfName) \ + { \ + *cnfName = (uchar*) name; \ + return RS_RET_OK;\ + } + + +/* to following macros are used to generate function headers and standard + * functionality. It works as follows (described on the sample case of + * createInstance()): + * + * BEGINcreateInstance + * ... custom variable definitions (on stack) ... (if any) + * CODESTARTcreateInstance + * ... custom code ... (if any) + * ENDcreateInstance + */ + +/* createInstance() + */ +#define BEGINcreateInstance \ +static rsRetVal createInstance(instanceData **ppData)\ + {\ + DEFiRet; /* store error code here */\ + instanceData *pData; /* use this to point to data elements */ + +#define CODESTARTcreateInstance \ + if((pData = calloc(1, sizeof(instanceData))) == NULL) {\ + *ppData = NULL;\ + return RS_RET_OUT_OF_MEMORY;\ + } + +#define ENDcreateInstance \ + *ppData = pData;\ + RETiRet;\ +} + +/* freeInstance() + * This is the cleanup function for the module instance. It is called immediately before + * the module instance is destroyed (unloaded). The module should do any cleanup + * here, e.g. close file, free instantance heap memory and the like. Control will + * not be passed back to the module once this function is finished. Keep in mind, + * however, that other instances may still be loaded and used. So do not destroy + * anything that may be used by another instance. If you have such a ressource, you + * currently need to do the instance counting yourself. + */ +#define BEGINfreeInstance \ +static rsRetVal freeInstance(void* pModData)\ +{\ + DEFiRet;\ + instanceData *pData; + +#define CODESTARTfreeInstance \ + pData = (instanceData*) pModData; + +#define ENDfreeInstance \ + if(pData != NULL)\ + free(pData); /* we need to free this in any case */\ + RETiRet;\ +} + +/* createWrkrInstance() + */ +#define BEGINcreateWrkrInstance \ +static rsRetVal createWrkrInstance(wrkrInstanceData_t **ppWrkrData, instanceData *pData)\ + {\ + DEFiRet; /* store error code here */\ + wrkrInstanceData_t *pWrkrData; /* use this to point to data elements */ + +#define CODESTARTcreateWrkrInstance \ + if((pWrkrData = calloc(1, sizeof(wrkrInstanceData_t))) == NULL) {\ + *ppWrkrData = NULL;\ + return RS_RET_OUT_OF_MEMORY;\ + } \ + pWrkrData->pData = pData; + +#define ENDcreateWrkrInstance \ + *ppWrkrData = pWrkrData;\ + RETiRet;\ +} + +/* freeWrkrInstance */ +#define BEGINfreeWrkrInstance \ +static rsRetVal freeWrkrInstance(void* pd)\ +{\ + DEFiRet;\ + wrkrInstanceData_t *pWrkrData; + +#define CODESTARTfreeWrkrInstance \ + pWrkrData = (wrkrInstanceData_t*) pd; + +#define ENDfreeWrkrInstance \ + if(pWrkrData != NULL)\ + free(pWrkrData); /* we need to free this in any case */\ + RETiRet;\ +} + + +/* isCompatibleWithFeature() + */ +#define BEGINisCompatibleWithFeature \ +static rsRetVal isCompatibleWithFeature(syslogFeature __attribute__((unused)) eFeat)\ +{\ + rsRetVal iRet = RS_RET_INCOMPATIBLE; \ + +#define CODESTARTisCompatibleWithFeature + +#define ENDisCompatibleWithFeature \ + RETiRet;\ +} + + +/* beginTransaction() + * introduced in v4.3.3 -- rgerhards, 2009-04-27 + */ +#define BEGINbeginTransaction \ +static rsRetVal beginTransaction(wrkrInstanceData_t __attribute__((unused)) *pWrkrData)\ +{\ + DEFiRet; + +#define CODESTARTbeginTransaction /* currently empty, but may be extended */ + +#define ENDbeginTransaction \ + RETiRet;\ +} + + +/* commitTransaction() + * Commits a transaction. Note that beginTransaction() must have been + * called before this entry point. It receives the full batch of messages + * to be processed in pParam parameter. + * introduced in v8.1.3 -- rgerhards, 2013-12-04 + */ +#define BEGINcommitTransaction \ +static rsRetVal commitTransaction(wrkrInstanceData_t __attribute__((unused)) *const pWrkrData, \ + actWrkrIParams_t *const pParams, const unsigned nParams)\ +{\ + DEFiRet; + +#define CODESTARTcommitTransaction /* currently empty, but may be extended */ + +#define ENDcommitTransaction \ + RETiRet;\ +} + +/* endTransaction() + * introduced in v4.3.3 -- rgerhards, 2009-04-27 + */ +#define BEGINendTransaction \ +static rsRetVal endTransaction(wrkrInstanceData_t __attribute__((unused)) *pWrkrData)\ +{\ + DEFiRet; + +#define CODESTARTendTransaction /* currently empty, but may be extended */ + +#define ENDendTransaction \ + RETiRet;\ +} + + +/* doAction() + */ +#define BEGINdoAction \ +static rsRetVal doAction(void * pMsgData, wrkrInstanceData_t __attribute__((unused)) *pWrkrData)\ +{\ + uchar **ppString = (uchar **) pMsgData; \ + DEFiRet; + +#define CODESTARTdoAction \ + /* ppString may be NULL if the output module requested no strings */ + +#define ENDdoAction \ + RETiRet;\ +} + +/* below is a variant of doAction where the passed-in data is not the common + * case of string. + */ +#define BEGINdoAction_NoStrings \ +static rsRetVal doAction(void * pMsgData, wrkrInstanceData_t __attribute__((unused)) *pWrkrData)\ +{\ + DEFiRet; + + +/* dbgPrintInstInfo() + * Extra comments: + * Print debug information about this instance. + */ +#define BEGINdbgPrintInstInfo \ +static rsRetVal dbgPrintInstInfo(void *pModData)\ +{\ + DEFiRet;\ + instanceData *pData = NULL; + +#define CODESTARTdbgPrintInstInfo \ + pData = (instanceData*) pModData; \ + (void)pData; /* prevent compiler warning if unused! */ + +#define ENDdbgPrintInstInfo \ + RETiRet;\ +} + + +/* parseSelectorAct() + * Extra comments: + * try to process a selector action line. Checks if the action + * applies to this module and, if so, processed it. If not, it + * is left untouched. The driver will then call another module. + * On exit, ppModData must point to instance data. Also, a string + * request object must be created and filled. A macro is defined + * for that. + * For the most usual case, we have defined a macro below. + * If more than one string is requested, the macro can be used together + * with own code that overwrites the entry count. In this case, the + * macro must come before the own code. It is recommended to be + * placed right after CODESTARTparseSelectorAct. + */ +#define BEGINparseSelectorAct \ +static rsRetVal parseSelectorAct(uchar **pp, void **ppModData, omodStringRequest_t **ppOMSR)\ +{\ + DEFiRet;\ + uchar *p;\ + instanceData *pData = NULL; + +#define CODESTARTparseSelectorAct \ + assert(pp != NULL);\ + assert(ppModData != NULL);\ + assert(ppOMSR != NULL);\ + p = *pp; + +#define CODE_STD_STRING_REQUESTparseSelectorAct(NumStrReqEntries) \ + CHKiRet(OMSRconstruct(ppOMSR, NumStrReqEntries)); + +#define CODE_STD_FINALIZERparseSelectorAct \ +finalize_it: ATTR_UNUSED; /* semi-colon needed according to gcc doc! */\ + if(iRet == RS_RET_OK || iRet == RS_RET_OK_WARN || iRet == RS_RET_SUSPENDED) {\ + *ppModData = pData;\ + *pp = p;\ + } else {\ + /* cleanup, we failed */\ + if(*ppOMSR != NULL) {\ + OMSRdestruct(*ppOMSR);\ + *ppOMSR = NULL;\ + }\ + if(pData != NULL) {\ + freeInstance(pData);\ + } \ + } + +#define ENDparseSelectorAct \ + RETiRet;\ +} + +/* a special replacement macro for modules that do not support legacy config at all */ +#define NO_LEGACY_CONF_parseSelectorAct \ +static rsRetVal parseSelectorAct(uchar **pp ATTR_UNUSED, void **ppModData ATTR_UNUSED, \ + omodStringRequest_t **ppOMSR ATTR_UNUSED)\ +{\ + return RS_RET_LEGA_ACT_NOT_SUPPORTED;\ +} + +/* newActInst() + * Extra comments: + * This creates a new instance of a the action that implements the call. + * This is part of the conf2 (rsyslog v6) config system. It is called by + * the core when an action object has been obtained. The output module + * must then verify parameters and create a new action instance (if + * parameters are acceptable) or return an error code. + * On exit, ppModData must point to instance data. Also, a string + * request object must be created and filled. A macro is defined + * for that. + * For the most usual case, we have defined a macro below. + * If more than one string is requested, the macro can be used together + * with own code that overwrites the entry count. In this case, the + * macro must come before the own code. It is recommended to be + * placed right after CODESTARTnewActInst. + */ +#define BEGINnewActInst \ +static rsRetVal newActInst(uchar __attribute__((unused)) *modName, \ + struct nvlst __attribute__((unused)) *lst, void **ppModData, \ + omodStringRequest_t **ppOMSR)\ +{\ + DEFiRet;\ + instanceData *pData = NULL; \ + *ppOMSR = NULL; + +#define CODESTARTnewActInst \ + +#define CODE_STD_STRING_REQUESTnewActInst(NumStrReqEntries) \ + CHKiRet(OMSRconstruct(ppOMSR, NumStrReqEntries)); + +#define CODE_STD_FINALIZERnewActInst \ +finalize_it:\ + if(iRet == RS_RET_OK || iRet == RS_RET_SUSPENDED) {\ + *ppModData = pData;\ + } else {\ + /* cleanup, we failed */\ + if(*ppOMSR != NULL) {\ + OMSRdestruct(*ppOMSR);\ + *ppOMSR = NULL;\ + }\ + if(pData != NULL) {\ + freeInstance(pData);\ + } \ + } + +#define ENDnewActInst \ + RETiRet;\ +} + + +/* newInpInst() + * This is basically the equivalent to newActInst() for creating input + * module (listener) instances. + */ +#define BEGINnewInpInst \ +static rsRetVal newInpInst(struct nvlst *lst)\ +{\ + DEFiRet; + +#define CODESTARTnewInpInst \ + +#define CODE_STD_FINALIZERnewInpInst + +#define ENDnewInpInst \ + RETiRet;\ +} + + + +/* newParserInst() + * This is basically the equivalent to newActInst() for creating parser + * module (listener) instances. + */ +#define BEGINnewParserInst \ +static rsRetVal newParserInst(struct nvlst *lst, void *pinst)\ +{\ + instanceConf_t *inst; \ + DEFiRet; + +#define CODESTARTnewParserInst \ + +#define CODE_STD_FINALIZERnewParserInst + +#define ENDnewParserInst \ + if(iRet == RS_RET_OK) \ + *((instanceConf_t**)pinst) = inst; \ + RETiRet;\ +} + + +/* freeParserInst */ +#define BEGINfreeParserInst \ +static rsRetVal freeParserInst(void* pi)\ +{\ + DEFiRet;\ + instanceConf_t *pInst; + +#define CODESTARTfreeParserInst\ + pInst = (instanceConf_t*) pi; + +#define ENDfreeParserInst\ + if(pInst != NULL)\ + free(pInst);\ + RETiRet;\ +} + +/* tryResume() + * This entry point is called to check if a module can resume operations. This + * happens when a module requested that it be suspended. In suspended state, + * the engine periodically tries to resume the module. If that succeeds, normal + * processing continues. If not, the module will not be called unless a + * tryResume() call succeeds. + * Returns RS_RET_OK, if resumption succeeded, RS_RET_SUSPENDED otherwise + * rgerhard, 2007-08-02 + */ +#define BEGINtryResume \ +static rsRetVal tryResume(wrkrInstanceData_t __attribute__((unused)) *pWrkrData)\ +{\ + DEFiRet; + +#define CODESTARTtryResume \ + assert(pWrkrData != NULL); + +#define ENDtryResume \ + RETiRet;\ +} + + +/* initConfVars() - initialize pre-v6.3-config variables + */ +#define BEGINinitConfVars \ +static rsRetVal initConfVars(void)\ +{\ + DEFiRet; + +#define CODESTARTinitConfVars + +#define ENDinitConfVars \ + RETiRet;\ +} + + +/* queryEtryPt() + */ +#define BEGINqueryEtryPt \ +DEFmodGetID \ +static rsRetVal queryEtryPt(uchar *name, rsRetVal (**pEtryPoint)())\ +{\ + DEFiRet; + +#define CODESTARTqueryEtryPt \ + if((name == NULL) || (pEtryPoint == NULL)) {\ + return RS_RET_PARAM_ERROR;\ + } \ + *pEtryPoint = NULL; + +#define ENDqueryEtryPt \ + if(iRet == RS_RET_OK)\ + if(*pEtryPoint == NULL) { \ + dbgprintf("entry point '%s' not present in module\n", name); \ + iRet = RS_RET_MODULE_ENTRY_POINT_NOT_FOUND;\ + } \ + RETiRet;\ +} + +/* the following definition is the standard block for queryEtryPt for all types + * of modules. It should be included in any module, and typically is so by calling + * the module-type specific macros. + */ +#define CODEqueryEtryPt_STD_MOD_QUERIES \ + if(!strcmp((char*) name, "modExit")) {\ + *pEtryPoint = modExit;\ + } else if(!strcmp((char*) name, "modGetID")) {\ + *pEtryPoint = modGetID;\ + } else if(!strcmp((char*) name, "getType")) {\ + *pEtryPoint = modGetType;\ + } else if(!strcmp((char*) name, "getKeepType")) {\ + *pEtryPoint = modGetKeepType;\ + } + +/* the following definition is the standard block for queryEtryPt for output + * modules WHICH DO NOT SUPPORT TRANSACTIONS. + */ +#define CODEqueryEtryPt_STD_OMOD_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "doAction")) {\ + *pEtryPoint = doAction;\ + } else if(!strcmp((char*) name, "dbgPrintInstInfo")) {\ + *pEtryPoint = dbgPrintInstInfo;\ + } else if(!strcmp((char*) name, "freeInstance")) {\ + *pEtryPoint = freeInstance;\ + } else if(!strcmp((char*) name, "parseSelectorAct")) {\ + *pEtryPoint = parseSelectorAct;\ + } else if(!strcmp((char*) name, "isCompatibleWithFeature")) {\ + *pEtryPoint = isCompatibleWithFeature;\ + } else if(!strcmp((char*) name, "tryResume")) {\ + *pEtryPoint = tryResume;\ + } + +/* the following definition is the standard block for queryEtryPt for output + * modules using the transaction interface. + */ +#define CODEqueryEtryPt_STD_OMODTX_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "beginTransaction")) {\ + *pEtryPoint = beginTransaction;\ + } else if(!strcmp((char*) name, "commitTransaction")) {\ + *pEtryPoint = commitTransaction;\ + } else if(!strcmp((char*) name, "dbgPrintInstInfo")) {\ + *pEtryPoint = dbgPrintInstInfo;\ + } else if(!strcmp((char*) name, "freeInstance")) {\ + *pEtryPoint = freeInstance;\ + } else if(!strcmp((char*) name, "parseSelectorAct")) {\ + *pEtryPoint = parseSelectorAct;\ + } else if(!strcmp((char*) name, "isCompatibleWithFeature")) {\ + *pEtryPoint = isCompatibleWithFeature;\ + } else if(!strcmp((char*) name, "tryResume")) {\ + *pEtryPoint = tryResume;\ + } + +/* standard queries for output module interface in rsyslog v8+ */ +#define CODEqueryEtryPt_STD_OMOD8_QUERIES \ + else if(!strcmp((char*) name, "createWrkrInstance")) {\ + *pEtryPoint = createWrkrInstance;\ + } else if(!strcmp((char*) name, "freeWrkrInstance")) {\ + *pEtryPoint = freeWrkrInstance;\ + } + +/* the following definition is queryEtryPt block that must be added + * if an output module supports the transactional interface. + * rgerhards, 2009-04-27 + */ +#define CODEqueryEtryPt_TXIF_OMOD_QUERIES \ + else if(!strcmp((char*) name, "beginTransaction")) {\ + *pEtryPoint = beginTransaction;\ + } else if(!strcmp((char*) name, "endTransaction")) {\ + *pEtryPoint = endTransaction;\ + } + + +/* the following definition is a queryEtryPt block that must be added + * if a non-output module supports "isCompatibleWithFeature". + * rgerhards, 2009-07-20 + */ +#define CODEqueryEtryPt_IsCompatibleWithFeature_IF_OMOD_QUERIES \ + else if(!strcmp((char*) name, "isCompatibleWithFeature")) {\ + *pEtryPoint = isCompatibleWithFeature;\ + } + + +/* the following definition is the standard block for queryEtryPt for INPUT + * modules. This can be used if no specific handling (e.g. to cover version + * differences) is needed. + */ +#define CODEqueryEtryPt_STD_IMOD_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "runInput")) {\ + *pEtryPoint = runInput;\ + } else if(!strcmp((char*) name, "willRun")) {\ + *pEtryPoint = willRun;\ + } else if(!strcmp((char*) name, "afterRun")) {\ + *pEtryPoint = afterRun;\ + } + + +/* the following block is to be added for modules that support the v2 + * config system. The config name is also provided. + */ +#define CODEqueryEtryPt_STD_CONF2_QUERIES \ + else if(!strcmp((char*) name, "beginCnfLoad")) {\ + *pEtryPoint = beginCnfLoad;\ + } else if(!strcmp((char*) name, "endCnfLoad")) {\ + *pEtryPoint = endCnfLoad;\ + } else if(!strcmp((char*) name, "checkCnf")) {\ + *pEtryPoint = checkCnf;\ + } else if(!strcmp((char*) name, "activateCnf")) {\ + *pEtryPoint = activateCnf;\ + } else if(!strcmp((char*) name, "freeCnf")) {\ + *pEtryPoint = freeCnf;\ + } \ + CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES + +/* the following block is to be added for modules that support v2 + * module global parameters [module(...)] + */ +#define CODEqueryEtryPt_STD_CONF2_setModCnf_QUERIES \ + else if(!strcmp((char*) name, "setModCnf")) {\ + *pEtryPoint = setModCnf;\ + } \ + +/* the following block is to be added for output modules that support the v2 + * config system. The config name is also provided. + */ +#define CODEqueryEtryPt_STD_CONF2_OMOD_QUERIES \ + else if(!strcmp((char*) name, "newActInst")) {\ + *pEtryPoint = newActInst;\ + } \ + CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES + + +/* the following block is to be added for input modules that support the v2 + * config system. The config name is also provided. + */ +#define CODEqueryEtryPt_STD_CONF2_IMOD_QUERIES \ + else if(!strcmp((char*) name, "newInpInst")) {\ + *pEtryPoint = newInpInst;\ + } \ + CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES + + +/* the following block is to be added for modules that require + * pre priv drop activation support. + */ +#define CODEqueryEtryPt_STD_CONF2_PREPRIVDROP_QUERIES \ + else if(!strcmp((char*) name, "activateCnfPrePrivDrop")) {\ + *pEtryPoint = activateCnfPrePrivDrop;\ + } + +/* the following block is to be added for modules that support + * their config name. This is required for the rsyslog v6 config + * system, especially for outout modules which do not require + * the new set of begin/end config settings. + */ +#define CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES \ + else if(!strcmp((char*) name, "getModCnfName")) {\ + *pEtryPoint = modGetCnfName;\ + } + +/* the following definition is the standard block for queryEtryPt for LIBRARY + * modules. This can be used if no specific handling (e.g. to cover version + * differences) is needed. + */ +#define CODEqueryEtryPt_STD_LIB_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES + +/* the following definition is the standard block for queryEtryPt for PARSER + * modules. This can be used if no specific handling (e.g. to cover version + * differences) is needed. + */ +#define CODEqueryEtryPt_STD_PMOD_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "parse")) {\ + *pEtryPoint = parse;\ + } else if(!strcmp((char*) name, "GetParserName")) {\ + *pEtryPoint = GetParserName;\ + } + +/* the following definition is the standard block for queryEtryPt for PARSER + * modules obeying the v2+ config interface. + */ +#define CODEqueryEtryPt_STD_PMOD2_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "parse2")) {\ + *pEtryPoint = parse2;\ + } else if(!strcmp((char*) name, "GetParserName")) {\ + *pEtryPoint = GetParserName;\ + } else if(!strcmp((char*) name, "newParserInst")) {\ + *pEtryPoint = newParserInst;\ + } else if(!strcmp((char*) name, "freeParserInst")) {\ + *pEtryPoint = freeParserInst;\ + } \ + CODEqueryEtryPt_STD_CONF2_CNFNAME_QUERIES + + + +/* the following definition is the standard block for queryEtryPt for rscript function + * modules. This can be used if no specific handling (e.g. to cover version + * differences) is needed. + */ +#define CODEqueryEtryPt_STD_FMOD_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "getFunctArray")) {\ + *pEtryPoint = getFunctArray;\ + } + +/* the following definition is the standard block for queryEtryPt for Strgen + * modules. This can be used if no specific handling (e.g. to cover version + * differences) is needed. + */ +#define CODEqueryEtryPt_STD_SMOD_QUERIES \ + CODEqueryEtryPt_STD_MOD_QUERIES \ + else if(!strcmp((char*) name, "strgen")) {\ + *pEtryPoint = strgen;\ + } else if(!strcmp((char*) name, "GetName")) {\ + *pEtryPoint = GetStrgenName;\ + } + +/* modInit() + * This has an extra parameter, which is the specific name of the modInit + * function. That is needed for built-in modules, which must have unique + * names in order to link statically. Please note that this is always only + * the case with modInit() and NO other entry point. The reason is that only + * modInit() is visible form a linker/loader point of view. All other entry + * points are passed via rsyslog-internal query functions and are defined + * static inside the modules source. This is an important concept, as it allows + * us to support different interface versions within a single module. (Granted, + * we do not currently have different interface versions, so we can not put + * it to a test - but our firm believe is that we can do all abstraction needed...) + * + * Extra Comments: + * initialize the module + * + * Later, much more must be done. So far, we only return a pointer + * to the queryEtryPt() function + * TODO: do interface version checking & handshaking + * iIfVersRequetsed is the version of the interface specification that the + * caller would like to see being used. ipIFVersProvided is what we + * decide to provide. + * rgerhards, 2007-11-21: see modExit() comment below for important information + * on the need to initialize static data with code. modInit() may be called on a + * cached, left-in-memory copy of a previous incarnation. + */ +#define BEGINmodInit(uniqName) \ +rsRetVal __attribute__((unused)) modInit##uniqName(int iIFVersRequested __attribute__((unused)), \ +int *ipIFVersProvided, rsRetVal (**pQueryEtryPt)(), rsRetVal (*pHostQueryEtryPt)(uchar*, rsRetVal (**)()), \ +modInfo_t __attribute__((unused)) *pModInfo);\ +rsRetVal __attribute__((unused)) modInit##uniqName(int iIFVersRequested __attribute__((unused)), \ +int *ipIFVersProvided, rsRetVal (**pQueryEtryPt)(), rsRetVal (*pHostQueryEtryPt)(uchar*, rsRetVal (**)()), \ +modInfo_t __attribute__((unused)) *pModInfo)\ +{\ + DEFiRet; \ + rsRetVal (*pObjGetObjInterface)(obj_if_t *pIf); + +#define CODESTARTmodInit \ + assert(pHostQueryEtryPt != NULL);\ + iRet = pHostQueryEtryPt((uchar*)"objGetObjInterface", &pObjGetObjInterface); \ + if((iRet != RS_RET_OK) || (pQueryEtryPt == NULL) || (ipIFVersProvided == NULL) || \ + (pObjGetObjInterface == NULL)) { \ + return (iRet == RS_RET_OK) ? RS_RET_PARAM_ERROR : iRet; \ + } \ + /* now get the obj interface so that we can access other objects */ \ + CHKiRet(pObjGetObjInterface(&obj)); + +/* do those initializations necessary for legacy config variables */ +#define INITLegCnfVars \ + initConfVars(); + +#define ENDmodInit \ +finalize_it:\ + *pQueryEtryPt = queryEtryPt;\ + RETiRet;\ +} + + +/* now come some check functions, which enable a standard way of obtaining feature + * information from the core. feat is the to-be-tested feature and featVar is a + * variable that receives the result (0-not support, 1-supported). + * This must be a macro, so that it is put into the output's code. Otherwise, we + * would need to rely on a library entry point, which is what we intend to avoid ;) + * rgerhards, 2009-04-27 + */ +#define INITChkCoreFeature(featVar, feat) \ +{ \ + rsRetVal MACRO_Ret; \ + rsRetVal (*pQueryCoreFeatureSupport)(int*, unsigned); \ + int bSupportsIt; \ + featVar = 0; \ + MACRO_Ret = pHostQueryEtryPt((uchar*)"queryCoreFeatureSupport", &pQueryCoreFeatureSupport); \ + if(MACRO_Ret == RS_RET_OK) { \ + /* found entry point, so let's see if core supports it */ \ + CHKiRet((*pQueryCoreFeatureSupport)(&bSupportsIt, feat)); \ + if(bSupportsIt) \ + featVar = 1; \ + } else if(MACRO_Ret != RS_RET_ENTRY_POINT_NOT_FOUND) { \ + ABORT_FINALIZE(MACRO_Ret); /* Something else went wrong, what is not acceptable */ \ + } \ +} + + + +/* definitions for host API queries */ +#define CODEmodInit_QueryRegCFSLineHdlr \ + CHKiRet(pHostQueryEtryPt((uchar*)"regCfSysLineHdlr", &omsdRegCFSLineHdlr)); + + +/* modExit() + * This is the counterpart to modInit(). It destroys a module and makes it ready for + * unloading. It is similiar to freeInstance() for the instance data. Please note that + * this entry point needs to free any module-global data structures and registrations. + * For example, the CfSysLineHandlers a module has registered need to be unregistered + * here. This entry point is only called immediately before unloading of the module. So + * it is likely to be destroyed. HOWEVER, the caller may decide to keep the module cached. + * So a module must never assume that it is actually destroyed. A call to modInit() may + * happen immediately after modExit(). So a module can NOT assume that static data elements + * are being re-initialized by the loader - this must always be done by module code itself. + * It is suggested to do this in modInit(). - rgerhards, 2007-11-21 + */ +#define BEGINmodExit \ +static rsRetVal modExit(void)\ +{\ + DEFiRet; + +#define CODESTARTmodExit + +#define ENDmodExit \ + RETiRet;\ +} + + +/* beginCnfLoad() + * This is a function tells an input module that a new config load begins. + * The core passes in a handle to the new module-specific module conf to + * the module. -- rgerards, 2011-05-03 + */ +#define BEGINbeginCnfLoad \ +static rsRetVal beginCnfLoad(modConfData_t **ptr, __attribute__((unused)) rsconf_t *pConf)\ +{\ + modConfData_t *pModConf; \ + DEFiRet; + +#define CODESTARTbeginCnfLoad \ + if((pModConf = calloc(1, sizeof(modConfData_t))) == NULL) {\ + *ptr = NULL;\ + return RS_RET_OUT_OF_MEMORY;\ + } + +#define ENDbeginCnfLoad \ + *ptr = pModConf;\ + RETiRet;\ +} + + +/* setModCnf() + * This function permits to set module global parameters via the v2 config + * interface. It may be called multiple times, but parameters must not be + * set in a conflicting way. The module must use its current config load + * context when processing the directives. + * Note that lst may be NULL, especially if the module is loaded via the + * legacy config system. The module must check for this. + * NOTE: This entry point must only be implemented if module global + * parameters are actually required. + */ +#define BEGINsetModCnf \ +static rsRetVal setModCnf(struct nvlst *lst)\ +{\ + DEFiRet; + +#define CODESTARTsetModCnf + +#define ENDsetModCnf \ + RETiRet;\ +} + + +/* endCnfLoad() + * This is a function tells an input module that the current config load ended. + * It gets a last chance to make changes to its in-memory config object. After + * this call, the config object must no longer be changed. + * The pModConf pointer passed into the module must no longer be used. + * rgerards, 2011-05-03 + */ +#define BEGINendCnfLoad \ +static rsRetVal endCnfLoad(modConfData_t *ptr)\ +{\ + modConfData_t __attribute__((unused)) *pModConf = (modConfData_t*) ptr; \ + DEFiRet; + +#define CODESTARTendCnfLoad + +#define ENDendCnfLoad \ + RETiRet;\ +} + + +/* checkCnf() + * Check the provided config object for errors, inconsistencies and other things + * that do not work out. + * NOTE: no part of the config must be activated, so some checks that require + * activation can not be done in this entry point. They must be done in the + * activateConf() stage, where the caller must also be prepared for error + * returns. + * rgerhards, 2011-05-03 + */ +#define BEGINcheckCnf \ +static rsRetVal checkCnf(modConfData_t *ptr)\ +{\ + modConfData_t __attribute__((unused)) *pModConf = (modConfData_t*) ptr; \ + DEFiRet; + +#define CODESTARTcheckCnf + +#define ENDcheckCnf \ + RETiRet;\ +} + + +/* activateCnfPrePrivDrop() + * Initial config activation, before dropping privileges. This is an optional + * entry points that should only be implemented by those module that really need + * it. Processing should be limited to the minimum possible. Main activation + * should happen in the normal activateCnf() call. + * rgerhards, 2011-05-06 + */ +#define BEGINactivateCnfPrePrivDrop \ +static rsRetVal activateCnfPrePrivDrop(modConfData_t *ptr)\ +{\ + modConfData_t *pModConf = (modConfData_t*) ptr; \ + DEFiRet; + +#define CODESTARTactivateCnfPrePrivDrop + +#define ENDactivateCnfPrePrivDrop \ + RETiRet;\ +} + + +/* activateCnf() + * This activates the provided config, and may report errors if they are detected + * during activation. + * rgerhards, 2011-05-03 + */ +#define BEGINactivateCnf \ +static rsRetVal activateCnf(modConfData_t *ptr)\ +{\ + modConfData_t __attribute__((unused)) *pModConf = (modConfData_t*) ptr; \ + DEFiRet; + +#define CODESTARTactivateCnf + +#define ENDactivateCnf \ + RETiRet;\ +} + + +/* freeCnf() + * This is a function tells an input module that it must free all data + * associated with the passed-in module config. + * rgerhards, 2011-05-03 + */ +#define BEGINfreeCnf \ +static rsRetVal freeCnf(void *ptr)\ +{\ + modConfData_t *pModConf = (modConfData_t*) ptr; \ + DEFiRet; + +#define CODESTARTfreeCnf + +#define ENDfreeCnf \ + if(pModConf != NULL)\ + free(pModConf); /* we need to free this in any case */\ + RETiRet;\ +} + + +/* runInput() + * This is the main function for input modules. It is used to gather data from the + * input source and submit it to the message queue. Each runInput() instance has its own + * thread. This is handled by the rsyslog engine. It needs to spawn off new threads only + * if there is a module-internal need to do so. + */ +#define BEGINrunInput \ +static rsRetVal runInput(thrdInfo_t __attribute__((unused)) *pThrd)\ +{\ + DEFiRet; + +#define CODESTARTrunInput \ + dbgSetThrdName((uchar*)__FILE__); /* we need to provide something better later */ + +#define ENDrunInput \ + RETiRet;\ +} + + +/* willRun() + * This is a function that will be replaced in the longer term. It is used so + * that a module can tell the caller if it will run or not. This is to be replaced + * when we introduce input module instances. However, these require config syntax + * changes and I may (or may not... ;)) hold that until another config file + * format is available. -- rgerhards, 2007-12-17 + * returns RS_RET_NO_RUN if it will not run (RS_RET_OK or error otherwise) + */ +#define BEGINwillRun \ +static rsRetVal willRun(void)\ +{\ + DEFiRet; + +#define CODESTARTwillRun + +#define ENDwillRun \ + RETiRet;\ +} + + +/* afterRun() + * This function is called after an input module has been run and its thread has + * been terminated. It shall do any necessary cleanup. + * This is expected to evolve into a freeInstance type of call once the input module + * interface evolves to support multiple instances. + * rgerhards, 2007-12-17 + */ +#define BEGINafterRun \ +static rsRetVal afterRun(void)\ +{\ + DEFiRet; + +#define CODESTARTafterRun + +#define ENDafterRun \ + RETiRet;\ +} + + +/* doHUP() + * This function is optional. Currently, it is available to output plugins + * only, but may be made available to other types of plugins in the future. + * A plugin does not need to define this entry point. If if does, it gets + * called when a HUP at the action level is to be done. A plugin should register + * this function so that it can close files, connection or other ressources + * on HUP - if it can be assume the user wanted to do this as a part of HUP + * processing. Note that the name "HUP" has historical reasons, it stems back + * to the infamous SIGHUP which was sent to restart a syslogd. We still retain + * that legacy, but may move this to a different signal. + * rgerhards, 2008-10-22 + */ +#define CODEqueryEtryPt_doHUP \ + else if(!strcmp((char*) name, "doHUP")) {\ + *pEtryPoint = doHUP;\ + } +#define BEGINdoHUP \ +static rsRetVal doHUP(instanceData __attribute__((unused)) *pData)\ +{\ + DEFiRet; + +#define CODESTARTdoHUP + +#define ENDdoHUP \ + RETiRet;\ +} + + +/* doHUPWrkr() + * This is like doHUP(), but on an action worker level. + * rgerhards, 2015-03-25 + */ +#define CODEqueryEtryPt_doHUPWrkr \ + else if(!strcmp((char*) name, "doHUPWrkr")) {\ + *pEtryPoint = doHUPWrkr;\ + } +#define BEGINdoHUPWrkr \ +static rsRetVal doHUPWrkr(wrkrInstanceData_t __attribute__((unused)) *pWrkrData)\ +{\ + DEFiRet; + +#define CODESTARTdoHUPWrkr + +#define ENDdoHUPWrkr \ + RETiRet;\ +} + + +/* SetShutdownImmdtPtr() + * This function is optional. If defined by an output plugin, it is called + * each time the action is invoked to set the "ShutdownImmediate" pointer, + * which is used during termination to indicate the action should shutdown + * as quickly as possible. + */ +#define CODEqueryEtryPt_SetShutdownImmdtPtr \ + else if(!strcmp((char*) name, "SetShutdownImmdtPtr")) {\ + *pEtryPoint = SetShutdownImmdtPtr;\ + } +#define BEGINSetShutdownImmdtPtr \ +static rsRetVal SetShutdownImmdtPtr(instanceData __attribute__((unused)) *pData, int *pPtr)\ +{\ + DEFiRet; + +#define CODESTARTSetShutdownImmdtPtr + +#define ENDSetShutdownImmdtPtr \ + RETiRet;\ +} + + +/* parse() - main entry point of parser modules (v1 config interface) + */ +#define BEGINparse \ +static rsRetVal parse(smsg_t *pMsg)\ +{\ + DEFiRet; + +#define CODESTARTparse \ + assert(pMsg != NULL); + +#define ENDparse \ + RETiRet;\ +} + + +/* parse2() - main entry point of parser modules (v2+ config interface) + */ +#define BEGINparse2 \ +static rsRetVal parse2(instanceConf_t *const pInst, smsg_t *pMsg)\ +{\ + DEFiRet; + +#define CODESTARTparse2 \ + assert(pInst != NULL);\ + assert(pMsg != NULL); + +#define ENDparse2 \ + RETiRet;\ +} + + +/* strgen() - main entry point of parser modules + * Note that we do NOT use size_t as this permits us to store the + * values directly into optimized heap structures. + * ppBuf is the buffer pointer + * pLenBuf is the current max size of this buffer + * pStrLen is an output parameter that MUST hold the length + * of the generated string on exit (this is cached) + */ +#define BEGINstrgen \ +static rsRetVal strgen(smsg_t *const pMsg, actWrkrIParams_t *const iparam) \ +{\ + DEFiRet; + +#define CODESTARTstrgen \ + assert(pMsg != NULL); + +#define ENDstrgen \ + RETiRet;\ +} + + + +/* getFunctArray() - main entry point of parser modules + * Note that we do NOT use size_t as this permits us to store the + * values directly into optimized heap structures. + * ppBuf is the buffer pointer + * pLenBuf is the current max size of this buffer + * pStrLen is an output parameter that MUST hold the length + * of the generated string on exit (this is cached) + */ +#define BEGINgetFunctArray \ +static rsRetVal getFunctArray(int *const version, const struct scriptFunct**const functArray) \ +{\ + DEFiRet; + +#define CODESTARTgetFunctArray + +#define ENDgetFunctArray \ + RETiRet;\ +} + + +/* function to specify the parser name. This is done via a single command which + * receives a ANSI string as parameter. + */ +#define PARSER_NAME(x) \ +static rsRetVal GetParserName(uchar **ppSz)\ +{\ + *ppSz = UCHAR_CONSTANT(x);\ + return RS_RET_OK;\ +} + + + +/* function to specify the strgen name. This is done via a single command which + * receives a ANSI string as parameter. + */ +#define STRGEN_NAME(x) \ +static rsRetVal GetStrgenName(uchar **ppSz)\ +{\ + *ppSz = UCHAR_CONSTANT(x);\ + return RS_RET_OK;\ +} + +#endif /* #ifndef MODULE_TEMPLATE_H_INCLUDED */ + +/* vim:set ai: + */ |