diff options
Diffstat (limited to '')
| -rw-r--r-- | runtime/zstdw.c | 191 |
1 files changed, 191 insertions, 0 deletions
diff --git a/runtime/zstdw.c b/runtime/zstdw.c new file mode 100644 index 0000000..7f80dae --- /dev/null +++ b/runtime/zstdw.c @@ -0,0 +1,191 @@ +/* The zstdw object. + * + * This is an rsyslog object wrapper around zstd. + * + * Copyright 2022 Rainer Gerhards and Adiscon GmbH. + * + * This file is part of the rsyslog runtime library. + * + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * -or- + * see COPYING.ASL20 in the source distribution + * + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. + */ + +#include "config.h" +#include <string.h> +#include <assert.h> +#include <zstd.h> + +#include "rsyslog.h" +#include "errmsg.h" +#include "stream.h" +#include "module-template.h" +#include "obj.h" +#include "zstdw.h" + +MODULE_TYPE_LIB +MODULE_TYPE_NOKEEP + +/* static data */ +DEFobjStaticHelpers + + +/* finish buffer, to be called before closing the zstd file. */ +static rsRetVal +zstd_doCompressFinish(strm_t *pThis, + rsRetVal (*strmPhysWrite)(strm_t *pThis, uchar *pBuf, size_t lenBuf) ) +{ + size_t remaining = 0; + DEFiRet; + assert(pThis != NULL); + + if(!pThis->bzInitDone) + goto done; + + char dummybuf; /* not sure if we can pass in NULL as buffer address in this special case */ + ZSTD_inBuffer input = { &dummybuf, 0, 0 }; + + do { + ZSTD_outBuffer output = { pThis->pZipBuf, pThis->sIOBufSize, 0 }; + remaining = ZSTD_compressStream2(pThis->zstd.cctx, &output , &input, ZSTD_e_end); + if(ZSTD_isError(remaining)) { + LogError(0, RS_RET_ZLIB_ERR, + "error returned from ZSTD_compressStream2(): %s\n", + ZSTD_getErrorName(remaining)); + ABORT_FINALIZE(RS_RET_ZLIB_ERR); + } + + CHKiRet(strmPhysWrite(pThis, (uchar*)pThis->pZipBuf, output.pos)); + + } while (remaining != 0); + +finalize_it: +done: RETiRet; +} + + +static rsRetVal +zstd_doStrmWrite(strm_t *pThis, uchar *const pBuf, const size_t lenBuf, const int bFlush, + rsRetVal (*strmPhysWrite)(strm_t *pThis, uchar *pBuf, size_t lenBuf) ) +{ + DEFiRet; + assert(pThis != NULL); + assert(pBuf != NULL); + if(!pThis->bzInitDone) { + pThis->zstd.cctx = (void*) ZSTD_createCCtx(); + if(pThis->zstd.cctx == NULL) { + LogError(0, RS_RET_ZLIB_ERR, "error creating zstd context (ZSTD_createCCtx failed, " + "that's all we know"); + ABORT_FINALIZE(RS_RET_ZLIB_ERR); + } + + ZSTD_CCtx_setParameter(pThis->zstd.cctx, ZSTD_c_compressionLevel, pThis->iZipLevel); + ZSTD_CCtx_setParameter(pThis->zstd.cctx, ZSTD_c_checksumFlag, 1); + if(pThis->zstd.num_wrkrs > 0) { + ZSTD_CCtx_setParameter(pThis->zstd.cctx, ZSTD_c_nbWorkers, + pThis->zstd.num_wrkrs); + } + pThis->bzInitDone = RSTRUE; + } + + /* now doing the compression */ + ZSTD_inBuffer input = { pBuf, lenBuf, 0 }; + + // This following needs to be configurable? It's possibly sufficient to use e_flush + // only, as this can also be controlled by veryRobustZip. However, testbench will than + // not be able to check when all file lines are complete. + ZSTD_EndDirective const mode = bFlush ? ZSTD_e_flush : ZSTD_e_continue; + size_t remaining; + do { + ZSTD_outBuffer output = { pThis->pZipBuf, 128, 0 }; + remaining = ZSTD_compressStream2(pThis->zstd.cctx, &output , &input, mode); + if(ZSTD_isError(remaining)) { + LogError(0, RS_RET_ZLIB_ERR, "error returned from ZSTD_compressStream2(): %s", + ZSTD_getErrorName(remaining)); + ABORT_FINALIZE(RS_RET_ZLIB_ERR); + } + + CHKiRet(strmPhysWrite(pThis, (uchar*)pThis->pZipBuf, output.pos)); + + } while ( mode == ZSTD_e_end ? (remaining != 0) : (input.pos != input.size)); + +finalize_it: + if(pThis->bzInitDone && pThis->bVeryReliableZip) { + zstd_doCompressFinish(pThis, strmPhysWrite); + } + RETiRet; +} + +/* destruction of caller's zstd ressources */ +static rsRetVal +zstd_Destruct(strm_t *const pThis) +{ + DEFiRet; + assert(pThis != NULL); + + if(!pThis->bzInitDone) + goto done; + + const int result = ZSTD_freeCCtx(pThis->zstd.cctx); + if(ZSTD_isError(result)) { + LogError(0, RS_RET_ZLIB_ERR, "error from ZSTD_freeCCtx(): %s", + ZSTD_getErrorName(result)); + } + + pThis->bzInitDone = 0; +done: RETiRet; +} + + +/* queryInterface function + * rgerhards, 2008-03-05 + */ +BEGINobjQueryInterface(zstdw) +CODESTARTobjQueryInterface(zstdw) + if(pIf->ifVersion != zstdwCURR_IF_VERSION) { /* check for current version, increment on each change */ + ABORT_FINALIZE(RS_RET_INTERFACE_NOT_SUPPORTED); + } + pIf->doStrmWrite = zstd_doStrmWrite; + pIf->doCompressFinish = zstd_doCompressFinish; + pIf->Destruct = zstd_Destruct; +finalize_it: +ENDobjQueryInterface(zstdw) + + +/* Initialize the zstdw class. Must be called as the very first method + * before anything else is called inside this class. + * rgerhards, 2008-02-19 + */ +BEGINAbstractObjClassInit(zstdw, 1, OBJ_IS_LOADABLE_MODULE) /* class, version */ +ENDObjClassInit(zstdw) + + +/* --------------- here now comes the plumbing that makes as a library module --------------- */ + + +BEGINmodExit +CODESTARTmodExit +ENDmodExit + + +BEGINqueryEtryPt +CODESTARTqueryEtryPt +CODEqueryEtryPt_STD_LIB_QUERIES +ENDqueryEtryPt + + +BEGINmodInit() +CODESTARTmodInit + *ipIFVersProvided = CURR_MOD_IF_VERSION; /* we only support the current interface specification */ + CHKiRet(zstdwClassInit(pModInfo)); +ENDmodInit |