summaryrefslogtreecommitdiffstats
path: root/tests/daqueue-dirty-shutdown.sh
diff options
context:
space:
mode:
Diffstat (limited to '')
-rwxr-xr-xtests/daqueue-dirty-shutdown.sh116
1 files changed, 116 insertions, 0 deletions
diff --git a/tests/daqueue-dirty-shutdown.sh b/tests/daqueue-dirty-shutdown.sh
new file mode 100755
index 0000000..c8de84b
--- /dev/null
+++ b/tests/daqueue-dirty-shutdown.sh
@@ -0,0 +1,116 @@
+#!/bin/bash
+# This test simulates the case where the OS force-terminates rsyslog
+# before it completely finishes persisting the queue to disk. Obviously,
+# there is some data loss involved, but rsyslog should try to limit it.
+# Most importantly, a .qi file needs to be written at "save" places, so that
+# at least the queue is kind of readable.
+# To simulate the error condition, we create a DA queue with a large memory
+# part and fill it via injectmsg (do NOT use tcpflood, as this would add
+# complexity of TCP window etc to the reception of messages - injectmsg is
+# synchronous, so we do not have anything in flight after it terminates).
+# We have a blocking action which prevents actual processing of any of the
+# injected messages. We then inject a large number of messages, but only
+# few above the number the memory part of the disk can hold. So the disk queue
+# begins to get used. Once injection is done, we terminate rsyslog in the
+# regular way, which will cause the memory part of the queue to be written
+# out. After a relatively short period, we kill -9 rsyslogd, so that it
+# does not have any chance to fully persists its state (this actually is
+# what happens when force-terminated by the OS).
+# Then, we check that at a minimum the .qi file exists.
+# Copyright (C) 2016 by Rainer Gerhards
+# Released under ASL 2.0
+
+#uncomment the following if you want a log for step 1 of this test
+#export RSYSLOG_DEBUG="debug nologfuncflow noprintmutexaction nostdout"
+#export RSYSLOG_DEBUGLOG="log"
+. ${srcdir:=.}/diag.sh init
+generate_conf
+add_conf '
+module(load="../plugins/omtesting/.libs/omtesting")
+
+# set spool locations and switch queue to disk-only mode
+global(workDirectory="'${RSYSLOG_DYNNAME}'.spool")
+main_queue(queue.filename="mainq" queue.saveonshutdown="on"
+ queue.timeoutshutdown="1" queue.maxfilesize="1m"
+ queue.timeoutworkerthreadshutdown="500" queue.size="200000"
+ )
+
+:msg, contains, "msgnum:" :omtesting:sleep 10 0
+'
+startup
+injectmsg 0 210000
+echo spool files immediately before shutdown:
+ls ${RSYSLOG_DYNNAME}.spool
+shutdown_immediate # shut down without the ability to fully persist state
+./msleep 750 # simulate an os timeout (let it run a *very short* bit, else it's done ;))
+echo spool files immediately after shutdown \(but before kill\):
+ls -l ${RSYSLOG_DYNNAME}.spool
+
+
+. $srcdir/diag.sh kill-immediate # do not give it sufficient time to shutdown
+wait_shutdown
+rm -f $RSYSLOG_PIDBASE.pid # as we kill, rsyslog does not itself cleanup the pid file
+
+echo spool files after kill:
+ls -l ${RSYSLOG_DYNNAME}.spool
+
+if [ ! -f ${RSYSLOG_DYNNAME}.spool/mainq.qi ]; then
+ echo "FAIL: .qi file does not exist!"
+ error_exit 1
+fi
+
+echo .qi file contents:
+cat ${RSYSLOG_DYNNAME}.spool/mainq.qi
+
+
+# We now restart rsyslog and make sure it'll clean up the disk queue.
+# So far, we cannot reliably detect if the data is properly shuffled
+# over, but that's a moot point anyhow because we expect to loss
+# (large) amounts of the data. In later stages, we however may verify
+
+#uncomment the following if you want a log for step 2 of this test
+#export RSYSLOG_DEBUG="debug nologfuncflow noprintmutexaction nostdout"
+#export RSYSLOG_DEBUGLOG="log2"
+
+printf 'RSYSLOG RESTART\n\n'
+# special case: we need to preserve our dynamic settings, as generate_conf
+# overwrites them. TODO: handle this in diag.sh
+RSYSLOG_DYNNAME_SAVE="$RSYSLOG_DYNNAME"
+RSYSLOG_OUT_LOG_SAVE="$RSYSLOG_OUT_LOG"
+generate_conf
+RSYSLOG_OUT_LOG="$RSYSLOG_OUT_LOG_SAVE"
+RSYSLOG_DYNNAME="$RSYSLOG_DYNNAME_SAVE"
+add_conf '
+module(load="../plugins/omtesting/.libs/omtesting")
+
+global(workDirectory="'${RSYSLOG_DYNNAME}'.spool")
+main_queue(queue.filename="mainq" queue.saveonshutdown="on"
+ queue.maxfilesize="1m" # note: now regular shutdown timeout!
+ queue.timeoutworkerthreadshutdown="500" queue.size="200000"
+ )
+
+$template outfmt,"%msg:F,58:2%\n"
+action(type="omfile" file="'$RSYSLOG_OUT_LOG'" template="outfmt")
+'
+startup
+#wait_queueempty
+#echo existing queue empty, injecting new data
+#injectmsg 1000000 1000
+shutdown_when_empty
+wait_shutdown
+
+# now the spool directory must be empty
+spoolFiles=$(ls ${RSYSLOG_DYNNAME}.spool/)
+
+if [[ ! -z $spoolFiles ]]; then
+ echo "FAIL: spool directory is not empty!"
+ ls -l ${RSYSLOG_DYNNAME}.spool
+ error_exit 1
+fi
+
+# check if we got at least some data
+if [ ! -f $RSYSLOG_OUT_LOG ]; then
+ echo "FAIL: no output data gathered (no ${RSYSLOG_OUT_LOG})!"
+ error_exit 1
+fi
+exit_test