/* This is the header file for the rsyslog runtime. It must be included * if someone intends to use the runtime. * * Begun 2005-09-15 RGerhards * * Copyright (C) 2005-2023 by Rainer Gerhards and Adiscon GmbH * * This file is part of the rsyslog runtime library. * * The rsyslog runtime library is free software: you can redistribute it and/or modify * it under the terms of the GNU Lesser General Public License as published by * the Free Software Foundation, either version 3 of the License, or * (at your option) any later version. * * The rsyslog runtime library is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU Lesser General Public License for more details. * * You should have received a copy of the GNU Lesser General Public License * along with the rsyslog runtime library. If not, see . * * A copy of the GPL can be found in the file "COPYING" in this distribution. * A copy of the LGPL can be found in the file "COPYING.LESSER" in this distribution. */ #ifndef INCLUDED_RSYSLOG_H #define INCLUDED_RSYSLOG_H #ifdef __GNUC__ #pragma GCC diagnostic ignored "-Wdeclaration-after-statement" #pragma GCC diagnostic ignored "-Wredundant-decls" // TODO: remove! #pragma GCC diagnostic ignored "-Wstrict-prototypes" // TODO: remove! #pragma GCC diagnostic ignored "-Wswitch-default" // TODO: remove! #if __GNUC__ >= 8 /* GCC, starting at least with version 8, is now really overdoing with it's * warning messages. We turn those off that either cause an enormous amount * of false positives or flag perfectly legal code as problematic. */ /* That one causes warnings when we use variable buffers for error * messages which may be truncated in the very unlikely case of all * vars using max value. If going over the max size, the engine will * most likely truncate due to max message size anyhow. Also, sizing * the buffers for max-max message size is a wast of (stack) memory. */ #pragma GCC diagnostic ignored "-Wformat-truncation" /* The next one flags variable initializations within out exception handling * (iRet system) as problematic, even though variables are not used in those * cases. This would be a good diagnostic if gcc would actually check that * a variable is used uninitialized. Unfortunately it does not do that. But * the static analyzers we use as part of CI do, so we are covered in any * case. * Unfortunately ignoring this diagnostic leads to two more info lines * being emitted where nobody knows what the mean and why they appear :-( */ #pragma GCC diagnostic ignored "-Wjump-misses-init" #endif /* if __GNUC__ >= 8 */ /* define a couple of attributes to improve cross-platform builds */ #if __GNUC__ > 6 #define CASE_FALLTHROUGH __attribute__((fallthrough)); #else #define CASE_FALLTHROUGH #endif #define ATTR_NORETURN __attribute__ ((noreturn)) #define ATTR_UNUSED __attribute__((unused)) #define ATTR_NONNULL(...) __attribute__((nonnull(__VA_ARGS__))) #else /* ifdef __GNUC__ */ #define CASE_FALLTHROUGH #define ATTR_NORETURN #define ATTR_UNUSED #define ATTR_NONNULL(...) #endif /* ifdef __GNUC__ */ #if defined(_AIX) #include /* AIXPORT : start*/ #define SRC_FD 13 #define SRCMSG (sizeof(srcpacket)) #endif /* src end */ #include #include "typedefs.h" #if defined(__GNUC__) #define PRAGMA_INGORE_Wswitch_enum _Pragma("GCC diagnostic ignored \"-Wswitch-enum\"") #define PRAGMA_IGNORE_Wempty_body _Pragma("GCC diagnostic ignored \"-Wempty-body\"") #define PRAGMA_IGNORE_Wstrict_prototypes _Pragma("GCC diagnostic ignored \"-Wstrict-prototypes\"") #define PRAGMA_IGNORE_Wold_style_definition \ _Pragma("GCC diagnostic ignored \"-Wold-style-definition\"") #if defined(__clang_major__) && __clang_major__ >= 14 #define PRAGMA_IGNORE_Wvoid_pointer_to_enum_cast \ _Pragma("GCC diagnostic ignored \"-Wvoid-pointer-to-enum-cast\"") #else #define PRAGMA_IGNORE_Wvoid_pointer_to_enum_cast #endif #define PRAGMA_IGNORE_Wsign_compare _Pragma("GCC diagnostic ignored \"-Wsign-compare\"") #define PRAGMA_IGNORE_Wpragmas _Pragma("GCC diagnostic ignored \"-Wpragmas\"") #define PRAGMA_IGNORE_Wmissing_noreturn _Pragma("GCC diagnostic ignored \"-Wmissing-noreturn\"") #define PRAGMA_IGNORE_Wexpansion_to_defined \ _Pragma("GCC diagnostic ignored \"-Wexpansion-to-defined\"") #define PRAGMA_IGNORE_Wunknown_warning_option \ _Pragma("GCC diagnostic ignored \"-Wunknown-warning-option\"") #define PRAGMA_IGNORE_Wunknown_attribute \ _Pragma("GCC diagnostic ignored \"-Wunknown-attribute\"") #define PRAGMA_IGNORE_Wformat_nonliteral \ _Pragma("GCC diagnostic ignored \"-Wformat-nonliteral\"") #define PRAGMA_IGNORE_Wdeprecated_declarations \ _Pragma("GCC diagnostic ignored \"-Wdeprecated-declarations\"") #if __GNUC__ >= 5 #define PRAGMA_DIAGNOSTIC_PUSH \ _Pragma("GCC diagnostic push") #define PRAGMA_DIAGNOSTIC_POP \ _Pragma("GCC diagnostic pop") #else #define PRAGMA_DIAGNOSTIC_PUSH #define PRAGMA_DIAGNOSTIC_POP #endif #else #define PRAGMA_INGORE_Wswitch_enum #define PRAGMA_IGNORE_Wsign_compare #define PRAGMA_IGNORE_Wformat_nonliteral #define PRAGMA_IGNORE_Wpragmas #define PRAGMA_IGNORE_Wmissing_noreturn #define PRAGMA_IGNORE_Wempty_body #define PRAGMA_IGNORE_Wstrict_prototypes #define PRAGMA_IGNORE_Wold_style_definition #define PRAGMA_IGNORE_Wvoid_pointer_to_enum_cast #define PRAGMA_IGNORE_Wdeprecated_declarations #define PRAGMA_IGNORE_Wexpansion_to_defined #define PRAGMA_IGNORE_Wunknown_attribute #define PRAGMA_IGNORE_Wunknown_warning_option #define PRAGMA_DIAGNOSTIC_PUSH #define PRAGMA_DIAGNOSTIC_POP #endif /* ############################################################# * * # Some constant values # * * ############################################################# */ #define CONST_LEN_TIMESTAMP_3164 15 /* number of chars (excluding \0!) in a RFC3164 timestamp */ #define CONST_LEN_TIMESTAMP_3339 32 /* number of chars (excluding \0!) in a RFC3339 timestamp */ #define CONST_LEN_CEE_COOKIE 5 #define CONST_CEE_COOKIE "@cee:" /* ############################################################# * * # Config Settings # * * ############################################################# */ #define RS_STRINGBUF_ALLOC_INCREMENT 128 /* MAXSIZE are absolute maxima, while BUFSIZE are just values after which * processing is more time-intense. The BUFSIZE params currently add their * value to the fixed size of the message object. */ #define CONF_TAG_MAXSIZE 512 /* a value that is deemed far too large for any valid TAG */ #define CONF_HOSTNAME_MAXSIZE 512 /* a value that is deemed far too large for any valid HOSTNAME */ #define CONF_RAWMSG_BUFSIZE 101 #define CONF_TAG_BUFSIZE 32 #define CONF_PROGNAME_BUFSIZE 16 #define CONF_HOSTNAME_BUFSIZE 32 #define CONF_PROP_BUFSIZE 16 /* should be close to sizeof(ptr) or lighly above it */ #define CONF_IPARAMS_BUFSIZE 16 /* initial size of iparams array in wti (is automatically extended) */ #define CONF_MIN_SIZE_FOR_COMPRESS 60 /* config param: minimum message size to try compression. The smaller * the message, the less likely is any compression gain. We check for * gain before we submit the message. But to do so we still need to * do the (costly) compress() call. The following setting sets a size * for which no call to compress() is done at all. This may result in * a few more bytes being transmited but better overall performance. * Note: I have not yet checked the minimum UDP packet size. It might be * that we do not save anything by compressing very small messages, because * UDP might need to pad ;) * rgerhards, 2006-11-30 */ #define CONF_OMOD_NUMSTRINGS_MAXSIZE 5 /* cache for pointers to output module buffer pointers. All * rsyslog-provided plugins do NOT need more than five buffers. If * more are needed (future developments, third-parties), rsyslog * must be recompiled with a larger parameter. Hardcoding this * saves us some overhead, both in runtime in code complexity. As * it is doubtful if ever more than 3 parameters are needed, the * approach taken here is considered appropriate. * rgerhards, 2010-06-24 */ #define CONF_NUM_MULTISUB 1024 /* default number of messages per multisub structure */ /* ############################################################# * * # End Config Settings # * * ############################################################# */ /* make sure we uses consistent macros, no matter what the * platform gives us. */ #undef LOG_NFACILITIES /* may be system defined, override */ #define LOG_NFACILITIES 24+1 /* plus one for our special "invld" facility! */ #define LOG_MAXPRI 191 /* highest supported valid PRI value --> RFC3164, RFC5424 */ #undef LOG_MAKEPRI #define LOG_PRI_INVLD (LOG_INVLD|LOG_DEBUG) /* PRI is invalid --> special "invld.=debug" PRI code (rsyslog-specific) */ #define LOG_EMERG 0 /* system is unusable */ #define LOG_ALERT 1 /* action must be taken immediately */ #define LOG_CRIT 2 /* critical conditions */ #define LOG_ERR 3 /* error conditions */ #define LOG_WARNING 4 /* warning conditions */ #define LOG_NOTICE 5 /* normal but significant condition */ #define LOG_INFO 6 /* informational */ #define LOG_DEBUG 7 /* debug-level messages */ #define LOG_KERN (0<<3) /* kernel messages */ #define LOG_USER (1<<3) /* random user-level messages */ #define LOG_MAIL (2<<3) /* mail system */ #define LOG_DAEMON (3<<3) /* system daemons */ #define LOG_AUTH (4<<3) /* security/authorization messages */ #define LOG_SYSLOG (5<<3) /* messages generated internally by syslogd */ #define LOG_LPR (6<<3) /* line printer subsystem */ #define LOG_NEWS (7<<3) /* network news subsystem */ #define LOG_UUCP (8<<3) /* UUCP subsystem */ #if !defined(LOG_CRON) #define LOG_CRON (9<<3) /* clock daemon */ #endif #define LOG_AUTHPRIV (10<<3) /* security/authorization messages (private) */ #define LOG_FTP (11<<3) /* ftp daemon */ #if defined(_AIX) /* AIXPORT : These are necessary for AIX */ #define LOG_ASO (12<<3) /* Active System Optimizer. Reserved for internal use */ #define LOG_CAA (15<<3) /* Cluster aware AIX subsystem */ #endif #define LOG_LOCAL0 (16<<3) /* reserved for local use */ #define LOG_LOCAL1 (17<<3) /* reserved for local use */ #define LOG_LOCAL2 (18<<3) /* reserved for local use */ #define LOG_LOCAL3 (19<<3) /* reserved for local use */ #define LOG_LOCAL4 (20<<3) /* reserved for local use */ #define LOG_LOCAL5 (21<<3) /* reserved for local use */ #define LOG_LOCAL6 (22<<3) /* reserved for local use */ #define LOG_LOCAL7 (23<<3) /* reserved for local use */ #define LOG_FAC_INVLD 24 #define LOG_INVLD (LOG_FAC_INVLD<<3) /* invalid facility/PRI code */ /* we need to evaluate our argument only once, as otherwise we may * have side-effects (this was seen in some version). * Note: I know that "static inline" is not the right thing from a C99 * PoV, but some environments treat, even in C99 mode, compile * non-static inline into the source even if not defined as "extern". This * obviously results in linker errors. Using "static inline" as below together * with "__attribute__((unused))" works in all cases. Note also that we * cannot work around this in pri2fac, as we would otherwise need to evaluate * pri more than once. */ static inline syslog_pri_t __attribute__((unused)) pri2fac(const syslog_pri_t pri) { unsigned fac = pri >> 3; return (fac > 23) ? LOG_FAC_INVLD : fac; } #define pri2sev(pri) ((pri) & 0x07) /* the rsyslog core provides information about present feature to plugins * asking it. Below are feature-test macros which must be used to query * features. Note that this must be powers of two, so that multiple queries * can be combined. -- rgerhards, 2009-04-27 */ #define CORE_FEATURE_BATCHING 1 /*#define CORE_FEATURE_whatever 2 ... and so on ... */ #ifndef _PATH_CONSOLE #define _PATH_CONSOLE "/dev/console" #endif /* The error codes below are orginally "borrowed" from * liblogging. As such, we reserve values up to -2999 * just in case we need to borrow something more ;) */ enum rsRetVal_ /** return value. All methods return this if not specified otherwise */ { /* the first two define are for errmsg.logError(), so that we can use the rsRetVal * as an rsyslog error code. -- rgerhards, 20080-06-27 */ RS_RET_NO_ERRCODE = -1, /**< RESERVED for NO_ERRCODE errmsg.logError status name */ RS_RET_INCLUDE_ERRNO = 1073741824, /* 2**30 - do NOT use error codes above this! */ /* begin regular error codes */ RS_RET_NOT_IMPLEMENTED = -7, /**< implementation is missing (probably internal error or lazyness ;)) */ RS_RET_OUT_OF_MEMORY = -6, /**< memory allocation failed */ RS_RET_PROVIDED_BUFFER_TOO_SMALL = -50, /*< the caller provided a buffer, but the called function sees the size of this buffer is too small - operation not carried out */ RS_RET_FILE_TRUNCATED = -51, /**< (input) file was truncated, not an error but a status */ RS_RET_TRUE = -3, /**< to indicate a true state (can be used as TRUE, legacy) */ RS_RET_FALSE = -2, /**< to indicate a false state (can be used as FALSE, legacy) */ RS_RET_NO_IRET = -8, /**< This is a trick for the debuging system - it means no iRet is provided */ RS_RET_VALIDATION_RUN = -9, /**< indicates a (config) validation run, processing not carried out */ RS_RET_ERR = -3000, /**< generic failure */ RS_TRUNCAT_TOO_LARGE = -3001, /**< truncation operation where too many chars should be truncated */ RS_RET_FOUND_AT_STRING_END = -3002, /**< some value found, but at the last pos of string */ RS_RET_NOT_FOUND = -3003, /**< some requested value not found */ RS_RET_MISSING_TRAIL_QUOTE = -3004, /**< an expected trailing quote is missing */ RS_RET_NO_DIGIT = -3005, /**< an digit was expected, but none found (mostly parsing) */ RS_RET_NO_MORE_DATA = -3006, /**< insufficient data, e.g. end of string during parsing */ RS_RET_INVALID_IP = -3007, /**< invalid ip found where valid was expected */ RS_RET_OBJ_CREATION_FAILED = - 3008, /**< the creation of an object failed (no details available) */ RS_RET_INOTIFY_INIT_FAILED = - 3009, /**< the initialization of an inotify instance failed (no details available) */ RS_RET_FEN_INIT_FAILED = - 3010, /**< the initialization of a fen instance failed (no details available) */ RS_RET_PARAM_ERROR = -1000, /**< invalid parameter in call to function */ RS_RET_MISSING_INTERFACE = -1001,/**< interface version mismatch, required missing */ RS_RET_INVALID_CORE_INTERFACE = -1002,/**< interface provided by host invalid, can not be used */ RS_RET_ENTRY_POINT_NOT_FOUND = -1003,/**< a requested entry point was not found */ RS_RET_MODULE_ENTRY_POINT_NOT_FOUND = -1004,/**< a entry point requested from a module was not present in it */ RS_RET_OBJ_NOT_AVAILABLE = -1005, /**< something could not be completed because the required object is not available*/ RS_RET_LOAD_ERROR = -1006,/**< we had an error loading the object/interface and can not continue */ RS_RET_MODULE_STILL_REFERENCED = -1007, /**< module could not be unloaded because it still is referenced by someone */ RS_RET_OBJ_UNKNOWN = -1008,/**< object is unknown where required */ RS_RET_OBJ_NOT_REGISTERED = -1009,/**< tried to unregister an object that is not registered */ /* return states for config file processing */ RS_RET_NONE = -2000, /**< some value is not available - not necessarily an error */ RS_RET_CONFLINE_UNPROCESSED = -2001,/**< config line was not processed, pass to other module */ RS_RET_DISCARDMSG = -2002, /**< discard message (no error state, processing request!) */ RS_RET_INCOMPATIBLE = -2003, /**< function not compatible with requested feature */ RS_RET_NOENTRY = -2004, /**< do not create an entry for (whatever) - not necessary an error */ RS_RET_NO_SQL_STRING = -2005, /**< string is not suitable for use as SQL */ RS_RET_DISABLE_ACTION = -2006, /**< action requests that it be disabled */ RS_RET_SUSPENDED = -2007, /**< something was suspended, not neccesarily an error */ RS_RET_RQD_TPLOPT_MISSING = -2008,/**< a required template option is missing */ RS_RET_INVALID_VALUE = -2009,/**< some value is invalid (e.g. user-supplied data) */ RS_RET_INVALID_INT = -2010,/**< invalid integer */ RS_RET_INVALID_CMD = -2011,/**< invalid command */ RS_RET_VAL_OUT_OF_RANGE = -2012, /**< value out of range */ RS_RET_FOPEN_FAILURE = -2013, /**< failure during fopen, for example file not found - see errno */ RS_RET_END_OF_LINKEDLIST = -2014, /**< end of linked list, not an error, but a status */ RS_RET_CHAIN_NOT_PERMITTED = -2015, /**< chaining (e.g. of config command handlers) not permitted */ RS_RET_INVALID_PARAMS = -2016,/**< supplied parameters are invalid */ RS_RET_EMPTY_LIST = -2017, /**< linked list is empty */ RS_RET_FINISHED = -2018, /**< some opertion is finished, not an error state */ RS_RET_INVALID_SOURCE = -2019, /**< source (address) invalid for some reason */ RS_RET_ADDRESS_UNKNOWN = -2020, /**< an address is unknown - not necessarily an error */ RS_RET_MALICIOUS_ENTITY = -2021, /**< there is an malicious entity involved */ RS_RET_NO_KERNEL_LOGSRC = -2022, /**< no source for kernel logs can be obtained */ RS_RET_TCP_SEND_ERROR = -2023, /**< error during TCP send process */ RS_RET_GSS_SEND_ERROR = -2024, /**< error during GSS (via TCP) send process */ RS_RET_TCP_SOCKCREATE_ERR = -2025, /**< error during creation of TCP socket */ RS_RET_GSS_SENDINIT_ERROR = -2024, /**< error during GSS (via TCP) send initialization process */ RS_RET_EOF = -2026, /**< end of file reached, not necessarily an error */ RS_RET_IO_ERROR = -2027, /**< some kind of IO error happened */ RS_RET_INVALID_OID = -2028, /**< invalid object ID */ RS_RET_INVALID_HEADER = -2029, /**< invalid header */ RS_RET_INVALID_HEADER_VERS = -2030, /**< invalid header version */ RS_RET_INVALID_DELIMITER = -2031, /**< invalid delimiter, e.g. between params */ RS_RET_INVALID_PROPFRAME = -2032, /**< invalid framing in serialized property */ RS_RET_NO_PROPLINE = -2033, /**< line is not a property line */ RS_RET_INVALID_TRAILER = -2034, /**< invalid trailer */ RS_RET_VALUE_TOO_LOW = -2035, /**< a provided value is too low */ RS_RET_FILE_PREFIX_MISSING = -2036, /**< a required file prefix (parameter?) is missing */ RS_RET_INVALID_HEADER_RECTYPE = -2037, /**< invalid record type in header or invalid header */ RS_RET_QTYPE_MISMATCH = -2038, /**< different qType when reading back a property type */ RS_RET_NO_FILE_ACCESS = -2039, /**< covers EACCES error on file open() */ RS_RET_FILE_NOT_FOUND = -2040, /**< file not found */ RS_RET_TIMED_OUT = -2041, /**< timeout occurred (not necessarily an error) */ RS_RET_QSIZE_ZERO = -2042, /**< queue size is zero where this is not supported */ RS_RET_ALREADY_STARTING = -2043, /**< something (a thread?) is already starting - not necessarily an error */ RS_RET_NO_MORE_THREADS = -2044, /**< no more threads available, not necessarily an error */ RS_RET_NO_FILEPREFIX = -2045, /**< file prefix is not specified where one is needed */ RS_RET_CONFIG_ERROR = -2046, /**< there is a problem with the user-provided config settigs */ RS_RET_OUT_OF_DESRIPTORS = -2047, /**< a descriptor table's space has been exhausted */ RS_RET_NO_DRIVERS = -2048, /**< a required drivers missing */ RS_RET_NO_DRIVERNAME = -2049, /**< driver name missing where one was required */ RS_RET_EOS = -2050, /**< end of stream (of whatever) */ RS_RET_SYNTAX_ERROR = -2051, /**< syntax error, eg. during parsing */ RS_RET_INVALID_OCTAL_DIGIT = -2052, /**< invalid octal digit during parsing */ RS_RET_INVALID_HEX_DIGIT = -2053, /**< invalid hex digit during parsing */ RS_RET_INTERFACE_NOT_SUPPORTED = -2054, /**< interface not supported */ RS_RET_OUT_OF_STACKSPACE = -2055, /**< a stack data structure is exhausted and can not be grown */ RS_RET_STACK_EMPTY = -2056, /**< a pop was requested on a stack, but the stack was already empty */ RS_RET_INVALID_VMOP = -2057, /**< invalid virtual machine instruction */ RS_RET_INVALID_VAR = -2058, /**< a var or its content is unsuitable, eg. VARTYPE_NONE */ RS_RET_INVALID_NUMBER = -2059, /**< number invalid during parsing */ RS_RET_NOT_A_NUMBER = -2060, /**< e.g. conversion impossible because the string is not a number */ RS_RET_OBJ_ALREADY_REGISTERED = -2061, /**< object (name) is already registered */ RS_RET_OBJ_REGISTRY_OUT_OF_SPACE = -2062, /**< the object registry has run out of space */ RS_RET_HOST_NOT_PERMITTED = -2063, /**< a host is not permitted to perform an action it requested */ RS_RET_MODULE_LOAD_ERR = -2064, /**< module could not be loaded */ RS_RET_MODULE_LOAD_ERR_PATHLEN = -2065, /**< module could not be loaded - path to long */ RS_RET_MODULE_LOAD_ERR_DLOPEN = -2066, /**< module could not be loaded - problem in dlopen() */ RS_RET_MODULE_LOAD_ERR_NO_INIT = -2067, /**< module could not be loaded - init() missing */ RS_RET_MODULE_LOAD_ERR_INIT_FAILED = -2068, /**< module could not be loaded - init() failed */ RS_RET_NO_SOCKET = -2069, /**< socket could not be obtained or was not provided */ RS_RET_SMTP_ERROR = -2070, /**< error during SMTP transation */ RS_RET_MAIL_NO_TO = -2071, /**< recipient for mail destination is missing */ RS_RET_MAIL_NO_FROM = -2072, /**< sender for mail destination is missing */ RS_RET_INVALID_PRI = -2073, /**< PRI value is invalid */ RS_RET_MALICIOUS_HNAME = -2074, /**< remote peer is trying malicious things with its hostname */ RS_RET_INVALID_HNAME = -2075, /**< remote peer's hostname invalid or unobtainable */ RS_RET_INVALID_PORT = -2076, /**< invalid port value */ RS_RET_COULD_NOT_BIND = -2077, /**< could not bind socket, defunct */ RS_RET_GNUTLS_ERR = -2078, /**< (unexpected) error in GnuTLS call */ RS_RET_MAX_SESS_REACHED = -2079, /**< max nbr of sessions reached, can not create more */ RS_RET_MAX_LSTN_REACHED = -2080, /**< max nbr of listeners reached, can not create more */ RS_RET_INVALID_DRVR_MODE = -2081, /**< tried to set mode not supported by driver */ RS_RET_DRVRNAME_TOO_LONG = -2082, /**< driver name too long - should never happen */ RS_RET_TLS_HANDSHAKE_ERR = -2083, /**< TLS handshake failed */ RS_RET_TLS_CERT_ERR = -2084, /**< generic TLS certificate error */ RS_RET_TLS_NO_CERT = -2085, /**< no TLS certificate available where one was expected */ RS_RET_VALUE_NOT_SUPPORTED = -2086, /**< a provided value is not supported */ RS_RET_VALUE_NOT_IN_THIS_MODE = -2087, /**< a provided value is invalid for the curret mode */ RS_RET_INVALID_FINGERPRINT = -2088, /**< a fingerprint is not valid for this use case */ RS_RET_CONNECTION_ABORTREQ = -2089, /**< connection was abort requested due to previous error */ RS_RET_CERT_INVALID = -2090, /**< a x509 certificate failed validation */ RS_RET_CERT_INVALID_DN = -2091, /**< distinguised name in x509 certificate is invalid (e.g. wrong escaping) */ RS_RET_CERT_EXPIRED = -2092, /**< we are past a x.509 cert's expiration time */ RS_RET_CERT_NOT_YET_ACTIVE = -2094, /**< x.509 cert's activation time not yet reached */ RS_RET_SYS_ERR = -2095, /**< system error occurred (e.g. time() returned -1, quite unexpected) */ RS_RET_FILE_NO_STAT = -2096, /**< can not stat() a file */ RS_RET_FILE_TOO_LARGE = -2097, /**< a file is larger than permitted */ RS_RET_INVALID_WILDCARD = -2098, /**< a wildcard entry is invalid */ RS_RET_CLOSED = -2099, /**< connection was closed */ RS_RET_RETRY = -2100, /**< call should be retried (e.g. EGAIN on recv) */ RS_RET_GSS_ERR = -2101, /**< generic error occurred in GSSAPI subsystem */ RS_RET_CERTLESS = -2102, /**< state: we run without machine cert (this may be OK) */ RS_RET_NO_ACTIONS = -2103, /**< no active actions are configured (no output will be created) */ RS_RET_CONF_FILE_NOT_FOUND = -2104, /**< config file or directory not found */ RS_RET_QUEUE_FULL = -2105, /**< queue is full, operation could not be completed */ RS_RET_ACCEPT_ERR = -2106, /**< error during accept() system call */ RS_RET_INVLD_TIME = -2107, /**< invalid timestamp (e.g. could not be parsed) */ RS_RET_NO_ZIP = -2108, /**< ZIP functionality is not present */ RS_RET_CODE_ERR = -2109, /**< program code (internal) error */ RS_RET_FUNC_NO_LPAREN = -2110, /**< left parenthesis missing after function call (rainerscript) */ RS_RET_FUNC_MISSING_EXPR = -2111, /**< no expression after comma in function call (rainerscript) */ RS_RET_INVLD_NBR_ARGUMENTS = -2112, /**< invalid number of arguments for function call (rainerscript) */ RS_RET_INVLD_FUNC = -2113, /**< invalid function name for function call (rainerscript) */ RS_RET_DUP_FUNC_NAME = -2114, /**< duplicate function name (rainerscript) */ RS_RET_UNKNW_FUNC = -2115, /**< unkown function name (rainerscript) */ RS_RET_ERR_RLIM_NOFILE = -2116, /**< error setting max. nbr open files process limit */ RS_RET_ERR_CREAT_PIPE = -2117, /**< error during pipe creation */ RS_RET_ERR_FORK = -2118, /**< error during fork() */ RS_RET_ERR_WRITE_PIPE = -2119, /**< error writing to pipe */ RS_RET_RSCORE_TOO_OLD = -2120, /**< rsyslog core is too old for ... (eg this plugin) */ RS_RET_DEFER_COMMIT = -2121, /**< output plugin status: not yet committed (an OK state!) */ RS_RET_PREVIOUS_COMMITTED = -2122, /**< output plugin status: previous record was committed (an OK state!) */ RS_RET_ACTION_FAILED = -2123, /**< action failed and is now suspended */ RS_RET_NON_SIZELIMITCMD = -2125, /**< size limit for file defined, but no size limit command given */ RS_RET_SIZELIMITCMD_DIDNT_RESOLVE = -2126, /**< size limit command did not resolve situation */ RS_RET_STREAM_DISABLED = -2127, /**< a file has been disabled (e.g. by size limit restriction) */ RS_RET_FILENAME_INVALID = -2140, /**< filename invalid, not found, no access, ... */ RS_RET_ZLIB_ERR = -2141, /**< error during zlib call */ RS_RET_VAR_NOT_FOUND = -2142, /**< variable not found */ RS_RET_EMPTY_MSG = -2143, /**< provided (raw) MSG is empty */ RS_RET_PEER_CLOSED_CONN = -2144, /**< remote peer closed connection (information, no error) */ RS_RET_ERR_OPEN_KLOG = -2145, /**< error opening or reading the kernel log socket */ RS_RET_ERR_AQ_CONLOG = -2146, /**< error aquiring console log (on solaris) */ RS_RET_ERR_DOOR = -2147, /**< some problems with handling the Solaris door functionality */ RS_RET_NO_SRCNAME_TPL = -2150, /**< sourcename template was not specified where one was needed (omudpspoof spoof addr) */ RS_RET_HOST_NOT_SPECIFIED = -2151, /**< (target) host was not specified where it was needed */ RS_RET_ERR_LIBNET_INIT = -2152, /**< error initializing libnet, e.g. because not running as root */ RS_RET_FORCE_TERM = -2153, /**< thread was forced to terminate by bShallShutdown, a state, not an error */ RS_RET_RULES_QUEUE_EXISTS = -2154,/**< we were instructed to create a new ruleset queue, but one already exists */ RS_RET_NO_CURR_RULESET = -2155,/**< no current ruleset exists (but one is required) */ RS_RET_NO_MSG_PASSING = -2156, /*< output module interface parameter passing mode "MSG" is not available but required */ RS_RET_RULESET_NOT_FOUND = -2157,/**< a required ruleset could not be found */ RS_RET_NO_RULESET= -2158,/**< no ruleset name as specified where one was needed */ RS_RET_PARSER_NOT_FOUND = -2159,/**< parser with the specified name was not found */ RS_RET_COULD_NOT_PARSE = -2160,/**< (this) parser could not parse the message (no error, means try next one) */ RS_RET_EINTR = -2161, /**< EINTR occurred during a system call (not necessarily an error) */ RS_RET_ERR_EPOLL = -2162, /**< epoll() returned with an unexpected error code */ RS_RET_ERR_EPOLL_CTL = -2163, /**< epol_ctll() returned with an unexpected error code */ RS_RET_TIMEOUT = -2164, /**< timeout occurred during operation */ RS_RET_RCV_ERR = -2165, /**< error occurred during socket rcv operation */ RS_RET_NO_SOCK_CONFIGURED = -2166, /**< no socket (name) was configured where one is required */ RS_RET_CONF_NOT_GLBL = -2167, /**< $Begin not in global scope */ RS_RET_CONF_IN_GLBL = -2168, /**< $End when in global scope */ RS_RET_CONF_INVLD_END = -2169, /**< $End for wrong conf object (probably nesting error) */ RS_RET_CONF_INVLD_SCOPE = -2170, /*< config statement not valid in current scope (e.g. global stmt in action block) */ RS_RET_CONF_END_NO_ACT = -2171, /**< end of action block, but no actual action specified */ RS_RET_NO_LSTN_DEFINED = -2172, /**< no listener defined (e.g. inside an input module) */ RS_RET_EPOLL_CR_FAILED = -2173, /**< epoll_create() failed */ RS_RET_EPOLL_CTL_FAILED = -2174, /**< epoll_ctl() failed */ RS_RET_INTERNAL_ERROR = -2175, /**< rsyslogd internal error, unexpected code path reached */ RS_RET_ERR_CRE_AFUX = -2176, /**< error creating AF_UNIX socket (and binding it) */ RS_RET_RATE_LIMITED = -2177, /**< some messages discarded due to exceeding a rate limit */ RS_RET_ERR_HDFS_WRITE = -2178, /**< error writing to HDFS */ RS_RET_ERR_HDFS_OPEN = -2179, /**< error during hdfsOpen (e.g. file does not exist) */ RS_RET_FILE_NOT_SPECIFIED = -2180, /**< file name not configured where this was required */ RS_RET_ERR_WRKDIR = -2181, /**< problems with the rsyslog working directory */ RS_RET_WRN_WRKDIR = -2182, /**< correctable problems with the rsyslog working directory */ RS_RET_ERR_QUEUE_EMERGENCY = -2183, /**< some fatal error caused queue to switch to emergency mode */ RS_RET_OUTDATED_STMT = -2184, /**< some outdated statement/functionality is being used in conf file */ RS_RET_MISSING_WHITESPACE = -2185, /**< whitespace is missing in some config construct */ RS_RET_OK_WARN = -2186, /**< config part: everything was OK, but a warning message was emitted */ RS_RET_INVLD_CONF_OBJ= -2200, /**< invalid config object (e.g. $Begin conf statement) */ /* UNUSED, WAS; RS_RET_ERR_LIBEE_INIT = -2201, < cannot obtain libee ctx */ RS_RET_ERR_LIBLOGNORM_INIT = -2202,/**< cannot obtain liblognorm ctx */ RS_RET_ERR_LIBLOGNORM_SAMPDB_LOAD = -2203,/**< liblognorm sampledb load failed */ RS_RET_CMD_GONE_AWAY = -2204,/**< config directive existed, but no longer supported */ RS_RET_ERR_SCHED_PARAMS = -2205,/**< there is a problem with configured thread scheduling params */ RS_RET_SOCKNAME_MISSING = -2206,/**< no socket name configured where one is required */ RS_RET_CONF_PARSE_ERROR = -2207,/**< (fatal) error parsing config file */ RS_RET_CONF_RQRD_PARAM_MISSING = -2208,/**< required parameter in config object is missing */ RS_RET_MOD_UNKNOWN = -2209,/**< module (config name) is unknown */ RS_RET_CONFOBJ_UNSUPPORTED = -2210,/**< config objects (v6 conf) are not supported here */ RS_RET_MISSING_CNFPARAMS = -2211, /**< missing configuration parameters */ RS_RET_NO_LISTNERS = -2212, /**< module loaded, but no listeners are defined */ RS_RET_INVLD_PROTOCOL = -2213, /**< invalid protocol specified in config file */ RS_RET_CNF_INVLD_FRAMING = -2214, /**< invalid framing specified in config file */ RS_RET_LEGA_ACT_NOT_SUPPORTED = -2215, /**< the module (no longer) supports legacy action syntax */ RS_RET_MAX_OMSR_REACHED = -2216, /**< max nbr of string requests reached, not supported by core */ RS_RET_UID_MISSING = -2217, /**< a user id is missing (but e.g. a password provided) */ RS_RET_DATAFAIL = -2218, /**< data passed to action caused failure */ /* reserved for pre-v6.5 */ RS_RET_DUP_PARAM = -2220, /**< config parameter is given more than once */ RS_RET_MODULE_ALREADY_IN_CONF = -2221, /**< module already in current configuration */ RS_RET_PARAM_NOT_PERMITTED = -2222, /**< legacy parameter no longer permitted (usally already set by v2) */ RS_RET_NO_JSON_PASSING = -2223, /**< rsyslog core does not support JSON-passing plugin API */ RS_RET_MOD_NO_INPUT_STMT = -2224, /**< (input) module does not support input() statement */ RS_RET_NO_CEE_MSG = -2225, /**< the message being processed is NOT CEE-enhanced */ /**** up to 2290 is reserved for v6 use ****/ RS_RET_RELP_ERR = -2291, /**<< error in RELP processing */ /**** up to 3000 is reserved for c7 use ****/ RS_RET_JNAME_NO_ROOT = -2301, /**< root element is missing in JSON path */ RS_RET_JNAME_INVALID = -2302, /**< JSON path is invalid */ RS_RET_JSON_PARSE_ERR = -2303, /**< we had a problem parsing JSON (or extra data) */ RS_RET_BSD_BLOCKS_UNSUPPORTED = -2304, /**< BSD-style config blocks are no longer supported */ RS_RET_JNAME_NOTFOUND = -2305, /**< JSON name not found (does not exist) */ RS_RET_INVLD_SETOP = -2305, /**< invalid variable set operation, incompatible type */ RS_RET_RULESET_EXISTS = -2306,/**< ruleset already exists */ RS_RET_DEPRECATED = -2307,/**< deprecated functionality is used */ RS_RET_DS_PROP_SEQ_ERR = -2308,/**< property sequence error deserializing object */ RS_RET_INVLD_PROP = -2309,/**< property name error (unknown name) */ RS_RET_NO_RULEBASE = -2310,/**< mmnormalize: rulebase can not be found or otherwise invalid */ RS_RET_INVLD_MODE = -2311,/**< invalid mode specified in configuration */ RS_RET_INVLD_ANON_BITS = -2312,/**< mmanon: invalid number of bits to anonymize specified */ RS_RET_REPLCHAR_IGNORED = -2313,/**< mmanon: replacementChar parameter is ignored */ RS_RET_SIGPROV_ERR = -2320,/**< error in signature provider */ RS_RET_CRYPROV_ERR = -2321,/**< error in cryptography encryption provider */ RS_RET_EI_OPN_ERR = -2322,/**< error opening an .encinfo file */ RS_RET_EI_NO_EXISTS = -2323,/**< .encinfo file does not exist (status, not necessarily error!)*/ RS_RET_EI_WR_ERR = -2324,/**< error writing an .encinfo file */ RS_RET_EI_INVLD_FILE = -2325,/**< header indicates the file is no .encinfo file */ RS_RET_CRY_INVLD_ALGO = -2326,/**< user specified invalid (unkonwn) crypto algorithm */ RS_RET_CRY_INVLD_MODE = -2327,/**< user specified invalid (unkonwn) crypto mode */ RS_RET_QUEUE_DISK_NO_FN = -2328,/**< disk queue configured, but filename not set */ RS_RET_CA_CERT_MISSING = -2329,/**< a CA cert is missing where one is required (e.g. TLS) */ RS_RET_CERT_MISSING = -2330,/**< a cert is missing where one is required (e.g. TLS) */ RS_RET_CERTKEY_MISSING = -2331,/**< a cert (private) key is missing where one is required (e.g. TLS) */ RS_RET_CRL_MISSING = -2332,/**< a CRL file is missing but not required (e.g. TLS) */ RS_RET_CRL_INVALID = -2333, /**< a CRL file PEM file failed validation */ RS_RET_CERT_REVOKED = -2334, /**< a certificate has been revoked */ RS_RET_STRUC_DATA_INVLD = -2349,/**< structured data is malformed */ /* up to 2350 reserved for 7.4 */ RS_RET_QUEUE_CRY_DISK_ONLY = -2351,/**< crypto provider only supported for disk-associated queues */ RS_RET_NO_DATA = -2352,/**< file has no data; more a state than a real error */ RS_RET_RELP_AUTH_FAIL = -2353,/**< RELP peer authentication failed */ RS_RET_ERR_UDPSEND = -2354,/**< sending msg via UDP failed */ RS_RET_LAST_ERRREPORT = -2355,/**< module does not emit more error messages as limit is reached */ RS_RET_READ_ERR = -2356,/**< read error occurred (file i/o) */ RS_RET_CONF_PARSE_WARNING = -2357,/**< warning parsing config file */ RS_RET_CONF_WRN_FULLDLY_BELOW_HIGHWTR = -2358,/**< warning queue full delay mark below high wtr mark */ RS_RET_RESUMED = -2359,/**< status: action was resumed (used for reporting) */ RS_RET_RELP_NO_TLS = -2360,/**< librel does not support TLS (but TLS requested) */ RS_RET_STATEFILE_WRONG_FNAME = -2361,/**< state file is for wrong file */ RS_RET_NAME_INVALID = -2362, /**< invalid name (in RainerScript) */ /* up to 2400 reserved for 7.5 & 7.6 */ RS_RET_INVLD_OMOD = -2400, /**< invalid output module, does not provide proper interfaces */ RS_RET_INVLD_INTERFACE_INPUT = -2401, /**< invalid value for "interface.input" parameter (ext progs) */ RS_RET_PARSER_NAME_EXISTS = -2402, /**< parser name already exists */ RS_RET_MOD_NO_PARSER_STMT = -2403, /**< (parser) module does not support parser() statement */ /* up to 2419 reserved for 8.4.x */ RS_RET_IMFILE_WILDCARD = -2420, /**< imfile file name contains wildcard, which may be problematic */ RS_RET_RELP_NO_TLS_AUTH = -2421,/**< librel does not support TLS authentication (but was requested) */ RS_RET_KAFKA_ERROR = -2422,/**< error reported by Apache Kafka subsystem. See message for details. */ RS_RET_KAFKA_NO_VALID_BROKERS = -2423,/**< no valid Kafka brokers configured/available */ RS_RET_KAFKA_PRODUCE_ERR = -2424,/**< error during Kafka produce function */ RS_RET_CONF_PARAM_INVLD = -2425,/**< config parameter is invalid */ RS_RET_KSI_ERR = -2426,/**< error in KSI subsystem */ RS_RET_ERR_LIBLOGNORM = -2427,/**< cannot obtain liblognorm ctx */ RS_RET_CONC_CTRL_ERR = -2428,/**< error in lock/unlock/condition/concurrent-modification operation */ RS_RET_SENDER_GONE_AWAY = -2429,/**< warning: sender not seen for configured amount of time */ RS_RET_SENDER_APPEARED = -2430,/**< info: new sender appeared */ RS_RET_FILE_ALREADY_IN_TABLE = -2431,/**< in imfile: table already contains to be added file */ RS_RET_ERR_DROP_PRIV = -2432,/**< error droping privileges */ RS_RET_FILE_OPEN_ERROR = -2433, /**< error other than "not found" occurred during open() */ RS_RET_RENAME_TMP_QI_ERROR = -2435, /**< renaming temporary .qi file failed */ RS_RET_ERR_SETENV = -2436, /**< error setting an environment variable */ RS_RET_DIR_CHOWN_ERROR = -2437, /**< error during chown() */ RS_RET_JSON_UNUSABLE = -2438, /**< JSON object is NULL or otherwise unusable */ RS_RET_OPERATION_STATUS = -2439, /**< operational status (info) message, no error */ RS_RET_UDP_MSGSIZE_TOO_LARGE = -2440, /**< a message is too large to be sent via UDP */ RS_RET_NON_JSON_PROP = -2441, /**< a non-json property id is provided where a json one is requried */ RS_RET_NO_TZ_SET = -2442, /**< system env var TZ is not set (status msg) */ RS_RET_FS_ERR = -2443, /**< file-system error */ RS_RET_POLL_ERR = -2444, /**< error in poll() system call */ RS_RET_OVERSIZE_MSG = -2445, /**< message is too long (above configured max) */ RS_RET_TLS_KEY_ERR = -2446, /**< TLS KEY has problems */ RS_RET_RABBITMQ_CONN_ERR = -2447, /**< RabbitMQ Connection error */ RS_RET_RABBITMQ_LOGIN_ERR = -2448, /**< RabbitMQ Login error */ RS_RET_RABBITMQ_CHANNEL_ERR = -2449, /**< RabbitMQ Connection error */ RS_RET_NO_WRKDIR_SET = -2450, /**< working directory not set, but desired by functionality */ RS_RET_ERR_QUEUE_FN_DUP = -2451, /**< duplicate queue file name */ RS_RET_REDIS_ERROR = -2452, /**< redis-specific error. See message foe details. */ RS_RET_REDIS_AUTH_FAILED = -2453, /**< redis authentication failure */ RS_RET_FAUP_INIT_OPTIONS_FAILED = -2454, /**< could not initialize faup options */ RS_RET_LIBCAPNG_ERR = -2455, /**< error during dropping the capabilities */ /* RainerScript error messages (range 1000.. 1999) */ RS_RET_SYSVAR_NOT_FOUND = 1001, /**< system variable could not be found (maybe misspelled) */ RS_RET_FIELD_NOT_FOUND = 1002, /**< field() function did not find requested field */ /* some generic error/status codes */ RS_RET_OK = 0, /**< operation successful */ RS_RET_OK_DELETE_LISTENTRY = 1, /*< operation successful, but callee requested the deletion of an entry (special state) */ RS_RET_TERMINATE_NOW = 2, /**< operation successful, function is requested to terminate (mostly used with threads) */ RS_RET_NO_RUN = 3, /**< operation successful, but function does not like to be executed */ RS_RET_IDLE = 4, /**< operation successful, but callee is idle (e.g. because queue is empty) */ RS_RET_TERMINATE_WHEN_IDLE = 5 /**< operation successful, function is requested to terminate when idle */ }; /* some helpful macros to work with srRetVals. * Be sure to call the to-be-returned variable always "iRet" and * the function finalizer always "finalize_it". */ #ifdef HAVE_BUILTIN_EXCEPT # define CHKiRet(code) if(__builtin_expect(((iRet = code) != RS_RET_OK), 0)) goto finalize_it # define likely(x) __builtin_expect(!!(x), 1) # define unlikely(x) __builtin_expect(!!(x), 0) #else # define CHKiRet(code) if((iRet = code) != RS_RET_OK) goto finalize_it # define likely(x) (x) # define unlikely(x) (x) #endif # define CHKiConcCtrl(code) { int tmp_CC; \ if ((tmp_CC = code) != 0) { \ iRet = RS_RET_CONC_CTRL_ERR; \ errno = tmp_CC; \ goto finalize_it; \ } \ } /* macro below is to be used if we need our own handling, eg for cleanup */ #define CHKiRet_Hdlr(code) if((iRet = code) != RS_RET_OK) /* macro below is to handle failing malloc/calloc/strdup... which we almost always handle in the same way... */ #define CHKmalloc(operation) if((operation) == NULL) ABORT_FINALIZE(RS_RET_OUT_OF_MEMORY) /* macro below is used in conjunction with CHKiRet_Hdlr, else use ABORT_FINALIZE */ #define FINALIZE goto finalize_it; #define DEFiRet rsRetVal iRet = RS_RET_OK #define RETiRet return iRet #define ABORT_FINALIZE(errCode) \ do { \ iRet = errCode; \ goto finalize_it; \ } while (0) /** Object ID. These are for internal checking. Each * object is assigned a specific ID. This is contained in * all Object structs (just like C++ RTTI). We can use * this field to see if we have been passed a correct ID. * Other than that, there is currently no other use for * the object id. */ enum rsObjectID { OIDrsFreed = -1, /**< assigned, when an object is freed. If this * is seen during a method call, this is an * invalid object pointer! */ OIDrsInvalid = 0, /**< value created by calloc(), so do not use ;) */ /* The 0x3412 is a debug aid. It helps us find object IDs in memory * dumps (on X86, this is 1234 in the dump ;) * If you are on an embedded device and you would like to save space * make them 1 byte only. */ OIDrsCStr = 0x34120001, OIDrsPars = 0x34120002 }; typedef enum rsObjectID rsObjID; /* support to set object types */ #ifdef NDEBUG #define rsSETOBJTYPE(pObj, type) #define rsCHECKVALIDOBJECT(x, type) #else #define rsSETOBJTYPE(pObj, type) pObj->OID = type; #define rsCHECKVALIDOBJECT(x, type) {assert(x != NULL); assert(x->OID == type);} #endif /** * This macro should be used to free objects. * It aids in interpreting dumps during debugging. */ #ifdef NDEBUG #define RSFREEOBJ(x) free(x) #else #define RSFREEOBJ(x) {(x)->OID = OIDrsFreed; free(x);} #endif extern pthread_attr_t default_thread_attr; #ifdef HAVE_PTHREAD_SETSCHEDPARAM extern struct sched_param default_sched_param; extern int default_thr_sched_policy; #endif /* The following structure defines immutable parameters which need to * be passed as action parameters. * * Note that output plugins may request multiple templates. Let's say * an output requests n templates. Than the overall table must hold * n*nbrMsgs records, and each messages begins on a n-boundary. There * is a macro defined below to access the proper element. * * WARNING: THIS STRUCTURE IS PART OF THE ***OUTPUT MODULE INTERFACE*** * It is passed into the doCommit() function. Do NOT modify it until * absolutely necessary - all output plugins need to be changed! * * If a change is "just" for internal working, consider adding a * separate parameter outside of this structure. Of course, it is * best to avoid this as well ;-) * rgerhards, 2013-12-04 */ struct actWrkrIParams { uchar *param; uint32_t lenBuf; /* length of string buffer (if string ptr) */ uint32_t lenStr; /* length of current string (if string ptr) */ }; /* macro to access actWrkrIParams base object: * param is ptr to base address * nActTpls is the number of templates the action has requested * iMsg is the message index * iTpl is the template index * This macro can be used for read and write access. */ #define actParam(param, nActTpls, iMsg, iTpl) (param[(iMsg*nActTpls)+iTpl]) /* for the time being, we do our own portability handling here. It * looks like autotools either does not yet support checks for it, or * I wasn't smart enough to find them ;) rgerhards, 2007-07-18 */ #ifndef __GNUC__ # define __attribute__(x) /*NOTHING*/ #endif #if !defined(O_CLOEXEC) && !defined(_AIX) /* of course, this limits the functionality... */ # define O_CLOEXEC 0 #endif /* some constants */ #define MUTEX_ALREADY_LOCKED 0 #define LOCK_MUTEX 1 #include "debug.h" #include "obj.h" /* the variable below is a trick: before we can init the runtime, the caller * may want to set a module load path. We can not do this via the glbl class * because it needs an initialized runtime system (and may at some point in time * even be loaded itself). So this is a no-go. What we do is use a single global * variable which may be provided with a pointer by the caller. This variable * resides in rsyslog.c, the main runtime file. We have not seen any realy valule * in providing object access functions. If you don't like that, feel free to * add them. -- rgerhards, 2008-04-17 */ extern uchar *glblModPath; /* module load path */ extern void (*glblErrLogger)(const int, const int, const uchar*); /* some runtime prototypes */ void processImInternal(void); rsRetVal rsrtInit(const char **ppErrObj, obj_if_t *pObjIF); rsRetVal rsrtExit(void); int rsrtIsInit(void); void rsrtSetErrLogger(void (*errLogger)(const int, const int, const uchar*)); void dfltErrLogger(const int, const int, const uchar *errMsg); rsRetVal queryLocalHostname(rsconf_t *const); /* this define below is (later) intended to be used to implement empty * structs. TODO: check if compilers supports this and, if not, define * a dummy variable. This requires review of where in code empty structs * are already defined. -- rgerhards, 2010-07-26 */ #ifdef OS_SOLARIS #define EMPTY_STRUCT int remove_me_when_first_real_member_is_added; #else #define EMPTY_STRUCT #endif /* TODO: remove this -- this is only for transition of the config system */ extern rsconf_t *ourConf; /* defined by syslogd.c, a hack for functions that do not yet receive a copy, so that we can incrementially compile and change... -- rgerhars, 2011-04-19 */ /* here we add some stuff from the compatibility layer. A separate include * would be cleaner, but would potentially require changes all over the * place. So doing it here is better. The respective replacement * functions should usually be found under ./compat -- rgerhards, 2015-05-20 */ #ifndef HAVE_STRNDUP char * strndup(const char *s, size_t n); #endif #endif /* multi-include protection */