diff options
Diffstat (limited to 'vendor/bstr-0.2.17/scripts')
| -rwxr-xr-x | vendor/bstr-0.2.17/scripts/generate-unicode-data | 149 | ||||
| -rw-r--r-- | vendor/bstr-0.2.17/scripts/regex/grapheme.sh | 50 | ||||
| -rw-r--r-- | vendor/bstr-0.2.17/scripts/regex/sentence.sh | 176 | ||||
| -rw-r--r-- | vendor/bstr-0.2.17/scripts/regex/word.sh | 111 |
4 files changed, 486 insertions, 0 deletions
diff --git a/vendor/bstr-0.2.17/scripts/generate-unicode-data b/vendor/bstr-0.2.17/scripts/generate-unicode-data new file mode 100755 index 000000000..b8341c5a6 --- /dev/null +++ b/vendor/bstr-0.2.17/scripts/generate-unicode-data @@ -0,0 +1,149 @@ +#!/bin/sh + +set -e +D="$(dirname "$0")" + +# Convenience function for checking that a command exists. +requires() { + cmd="$1" + if ! command -v "$cmd" > /dev/null 2>&1; then + echo "DEPENDENCY MISSING: $cmd must be installed" >&2 + exit 1 + fi +} + +# Test if an array ($2) contains a particular element ($1). +array_exists() { + needle="$1" + shift + + for el in "$@"; do + if [ "$el" = "$needle" ]; then + return 0 + fi + done + return 1 +} + +graphemes() { + regex="$(sh "$D/regex/grapheme.sh")" + + echo "generating forward grapheme DFA" + ucd-generate dfa \ + --name GRAPHEME_BREAK_FWD \ + --sparse --minimize --anchored --state-size 2 \ + src/unicode/fsm/ \ + "$regex" + + echo "generating reverse grapheme DFA" + ucd-generate dfa \ + --name GRAPHEME_BREAK_REV \ + --reverse --longest \ + --sparse --minimize --anchored --state-size 2 \ + src/unicode/fsm/ \ + "$regex" +} + +words() { + regex="$(sh "$D/regex/word.sh")" + + echo "generating forward word DFA (this can take a while)" + ucd-generate dfa \ + --name WORD_BREAK_FWD \ + --sparse --minimize --anchored --state-size 4 \ + src/unicode/fsm/ \ + "$regex" +} + +sentences() { + regex="$(sh "$D/regex/sentence.sh")" + + echo "generating forward sentence DFA (this can take a while)" + ucd-generate dfa \ + --name SENTENCE_BREAK_FWD \ + --minimize \ + --sparse --anchored --state-size 4 \ + src/unicode/fsm/ \ + "$regex" +} + +regional_indicator() { + # For finding all occurrences of region indicators. This is used to handle + # regional indicators as a special case for the reverse grapheme iterator + # and the reverse word iterator. + echo "generating regional indicator DFA" + ucd-generate dfa \ + --name REGIONAL_INDICATOR_REV \ + --reverse \ + --classes --minimize --anchored --premultiply --state-size 1 \ + src/unicode/fsm/ \ + "\p{gcb=Regional_Indicator}" +} + +simple_word() { + echo "generating forward simple word DFA" + ucd-generate dfa \ + --name SIMPLE_WORD_FWD \ + --sparse --minimize --state-size 2 \ + src/unicode/fsm/ \ + "\w" +} + +whitespace() { + echo "generating forward whitespace DFA" + ucd-generate dfa \ + --name WHITESPACE_ANCHORED_FWD \ + --anchored --classes --premultiply --minimize --state-size 1 \ + src/unicode/fsm/ \ + "\s+" + + echo "generating reverse whitespace DFA" + ucd-generate dfa \ + --name WHITESPACE_ANCHORED_REV \ + --reverse \ + --anchored --classes --premultiply --minimize --state-size 2 \ + src/unicode/fsm/ \ + "\s+" +} + +main() { + if array_exists "-h" "$@" || array_exists "--help" "$@"; then + echo "Usage: $(basename "$0") [--list-commands] [<command>] ..." >&2 + exit + fi + + commands=" + graphemes + sentences + words + regional-indicator + simple-word + whitespace + " + if array_exists "--list-commands" "$@"; then + for cmd in $commands; do + echo "$cmd" + done + exit + fi + + # ucd-generate is used to compile regexes into DFAs. + requires ucd-generate + + mkdir -p src/unicode/fsm/ + + cmds=$* + if [ $# -eq 0 ] || array_exists "all" "$@"; then + cmds=$commands + fi + for cmd in $cmds; do + if array_exists "$cmd" $commands; then + fun="$(echo "$cmd" | sed 's/-/_/g')" + eval "$fun" + else + echo "unrecognized command: $cmd" >&2 + fi + done +} + +main "$@" diff --git a/vendor/bstr-0.2.17/scripts/regex/grapheme.sh b/vendor/bstr-0.2.17/scripts/regex/grapheme.sh new file mode 100644 index 000000000..0b2b54daa --- /dev/null +++ b/vendor/bstr-0.2.17/scripts/regex/grapheme.sh @@ -0,0 +1,50 @@ +#!/bin/sh + +# vim: indentexpr= nosmartindent autoindent +# vim: tabstop=2 shiftwidth=2 softtabstop=2 + +# This regex was manually written, derived from the rules in UAX #29. +# Particularly, from Table 1c, which lays out a regex for grapheme clusters. + +CR="\p{gcb=CR}" +LF="\p{gcb=LF}" +Control="\p{gcb=Control}" +Prepend="\p{gcb=Prepend}" +L="\p{gcb=L}" +V="\p{gcb=V}" +LV="\p{gcb=LV}" +LVT="\p{gcb=LVT}" +T="\p{gcb=T}" +RI="\p{gcb=RI}" +Extend="\p{gcb=Extend}" +ZWJ="\p{gcb=ZWJ}" +SpacingMark="\p{gcb=SpacingMark}" + +Any="\p{any}" +ExtendPict="\p{Extended_Pictographic}" + +echo "(?x) +$CR $LF +| +$Control +| +$Prepend* +( + ( + ($L* ($V+ | $LV $V* | $LVT) $T*) + | + $L+ + | + $T+ + ) + | + $RI $RI + | + $ExtendPict ($Extend* $ZWJ $ExtendPict)* + | + [^$Control $CR $LF] +) +[$Extend $ZWJ $SpacingMark]* +| +$Any +" diff --git a/vendor/bstr-0.2.17/scripts/regex/sentence.sh b/vendor/bstr-0.2.17/scripts/regex/sentence.sh new file mode 100644 index 000000000..689d1849f --- /dev/null +++ b/vendor/bstr-0.2.17/scripts/regex/sentence.sh @@ -0,0 +1,176 @@ +#!/bin/sh + +# vim: indentexpr= nosmartindent autoindent +# vim: tabstop=2 shiftwidth=2 softtabstop=2 + +# This is a regex that I reverse engineered from the sentence boundary chain +# rules in UAX #29. Unlike the grapheme regex, which is essentially provided +# for us in UAX #29, no such sentence regex exists. +# +# I looked into how ICU achieves this, since UAX #29 hints that producing +# finite state machines for grapheme/sentence/word/line breaking is possible, +# but only easy to do for graphemes. ICU does this by implementing their own +# DSL for describing the break algorithms in terms of the chaining rules +# directly. You can see an example for sentences in +# icu4c/source/data/brkitr/rules/sent.txt. ICU then builds a finite state +# machine from those rules in a mostly standard way, but implements the +# "chaining" aspect of the rules by connecting overlapping end and start +# states. For example, given SB7: +# +# (Upper | Lower) ATerm x Upper +# +# Then the naive way to convert this into a regex would be something like +# +# [\p{sb=Upper}\p{sb=Lower}]\p{sb=ATerm}\p{sb=Upper} +# +# Unfortunately, this is incorrect. Why? Well, consider an example like so: +# +# U.S.A. +# +# A correct implementation of the sentence breaking algorithm should not insert +# any breaks here, exactly in accordance with repeatedly applying rule SB7 as +# given above. Our regex fails to do this because it will first match `U.S` +# without breaking them---which is correct---but will then start looking for +# its next rule beginning with a full stop (in ATerm) and followed by an +# uppercase letter (A). This will wind up triggering rule SB11 (without +# matching `A`), which inserts a break. +# +# The reason why this happens is because our initial application of rule SB7 +# "consumes" the next uppercase letter (S), which we want to reuse as a prefix +# in the next rule application. A natural way to express this would be with +# look-around, although it's not clear that works in every case since you +# ultimately might want to consume that ending uppercase letter. In any case, +# we can't use look-around in our truly regular regexes, so we must fix this. +# The approach we take is to explicitly repeat rules when a suffix of a rule +# is a prefix of another rule. In the case of SB7, the end of the rule, an +# uppercase letter, also happens to match the beginning of the rule. This can +# in turn be repeated indefinitely. Thus, our actual translation to a regex is: +# +# [\p{sb=Upper}\p{sb=Lower}]\p{sb=ATerm}\p{sb=Upper}(\p{sb=ATerm}\p{sb=Upper}* +# +# It turns out that this is exactly what ICU does, but in their case, they do +# it automatically. In our case, we connect the chaining rules manually. It's +# tedious. With that said, we do no implement Unicode line breaking with this +# approach, which is a far scarier beast. In that case, it would probably be +# worth writing the code to do what ICU does. +# +# In the case of sentence breaks, there aren't *too* many overlaps of this +# nature. We list them out exhaustively to make this clear, because it's +# essentially impossible to easily observe this in the regex. (It took me a +# full day to figure all of this out.) Rules marked with N/A mean that they +# specify a break, and this strategy only really applies to stringing together +# non-breaks. +# +# SB1 - N/A +# SB2 - N/A +# SB3 - None +# SB4 - N/A +# SB5 - None +# SB6 - None +# SB7 - End overlaps with beginning of SB7 +# SB8 - End overlaps with beginning of SB7 +# SB8a - End overlaps with beginning of SB6, SB8, SB8a, SB9, SB10, SB11 +# SB9 - None +# SB10 - None +# SB11 - None +# SB998 - N/A +# +# SB8a is in particular quite tricky to get right without look-ahead, since it +# allows ping-ponging between match rules SB8a and SB9-11, where SB9-11 +# otherwise indicate that a break has been found. In the regex below, we tackle +# this by only permitting part of SB8a to match inside our core non-breaking +# repetition. In particular, we only allow the parts of SB8a to match that +# permit the non-breaking components to continue. If a part of SB8a matches +# that guarantees a pop out to SB9-11, (like `STerm STerm`), then we let it +# happen. This still isn't correct because an SContinue might be seen which +# would allow moving back into SB998 and thus the non-breaking repetition, so +# we handle that case as well. +# +# Finally, the last complication here is the sprinkling of $Ex* everywhere. +# This essentially corresponds to the implementation of SB5 by following +# UAX #29's recommendation in S6.2. Essentially, we use it avoid ever breaking +# in the middle of a grapheme cluster. + +CR="\p{sb=CR}" +LF="\p{sb=LF}" +Sep="\p{sb=Sep}" +Close="\p{sb=Close}" +Sp="\p{sb=Sp}" +STerm="\p{sb=STerm}" +ATerm="\p{sb=ATerm}" +SContinue="\p{sb=SContinue}" +Numeric="\p{sb=Numeric}" +Upper="\p{sb=Upper}" +Lower="\p{sb=Lower}" +OLetter="\p{sb=OLetter}" + +Ex="[\p{sb=Extend}\p{sb=Format}]" +ParaSep="[$Sep $CR $LF]" +SATerm="[$STerm $ATerm]" + +LetterSepTerm="[$OLetter $Upper $Lower $ParaSep $SATerm]" + +echo "(?x) +( + # SB6 + $ATerm $Ex* + $Numeric + | + # SB7 + [$Upper $Lower] $Ex* $ATerm $Ex* + $Upper $Ex* + # overlap with SB7 + ($ATerm $Ex* $Upper $Ex*)* + | + # SB8 + $ATerm $Ex* $Close* $Ex* $Sp* $Ex* + ([^$LetterSepTerm] $Ex*)* $Lower $Ex* + # overlap with SB7 + ($ATerm $Ex* $Upper $Ex*)* + | + # SB8a + $SATerm $Ex* $Close* $Ex* $Sp* $Ex* + ( + $SContinue + | + $ATerm $Ex* + # Permit repetition of SB8a + (($Close $Ex*)* ($Sp $Ex*)* $SATerm)* + # In order to continue non-breaking matching, we now must observe + # a match with a rule that keeps us in SB6-8a. Otherwise, we've entered + # one of SB9-11 and know that a break must follow. + ( + # overlap with SB6 + $Numeric + | + # overlap with SB8 + ($Close $Ex*)* ($Sp $Ex*)* + ([^$LetterSepTerm] $Ex*)* $Lower $Ex* + # overlap with SB7 + ($ATerm $Ex* $Upper $Ex*)* + | + # overlap with SB8a + ($Close $Ex*)* ($Sp $Ex*)* $SContinue + ) + | + $STerm $Ex* + # Permit repetition of SB8a + (($Close $Ex*)* ($Sp $Ex*)* $SATerm)* + # As with ATerm above, in order to continue non-breaking matching, we + # must now observe a match with a rule that keeps us out of SB9-11. + # For STerm, the only such possibility is to see an SContinue. Anything + # else will result in a break. + ($Close $Ex*)* ($Sp $Ex*)* $SContinue + ) + | + # SB998 + # The logic behind this catch-all is that if we get to this point and + # see a Sep, CR, LF, STerm or ATerm, then it has to fall into one of + # SB9, SB10 or SB11. In the cases of SB9-11, we always find a break since + # SB11 acts as a catch-all to induce a break following a SATerm that isn't + # handled by rules SB6-SB8a. + [^$ParaSep $SATerm] +)* +# The following collapses rules SB3, SB4, part of SB8a, SB9, SB10 and SB11. +($SATerm $Ex* ($Close $Ex*)* ($Sp $Ex*)*)* ($CR $LF | $ParaSep)? +" diff --git a/vendor/bstr-0.2.17/scripts/regex/word.sh b/vendor/bstr-0.2.17/scripts/regex/word.sh new file mode 100644 index 000000000..78c7a05cf --- /dev/null +++ b/vendor/bstr-0.2.17/scripts/regex/word.sh @@ -0,0 +1,111 @@ +#!/bin/sh + +# vim: indentexpr= nosmartindent autoindent +# vim: tabstop=2 shiftwidth=2 softtabstop=2 + +# See the comments in regex/sentence.sh for the general approach to how this +# regex was written. +# +# Writing the regex for this was *hard*. It took me two days of hacking to get +# this far, and that was after I had finished the sentence regex, so my brain +# was fully cached on this. Unlike the sentence regex, the rules in the regex +# below don't correspond as nicely to the rules in UAX #29. In particular, the +# UAX #29 rules have a ton of overlap with each other, which requires crazy +# stuff in the regex. I'm not even sure the regex below is 100% correct or even +# minimal, however, I did compare this with the ICU word segmenter on a few +# different corpora, and it produces identical results. (In addition to of +# course passing the UCD tests.) +# +# In general, I consider this approach to be a failure. Firstly, this is +# clearly a write-only regex. Secondly, building the minimized DFA for this is +# incredibly slow. Thirdly, the DFA is itself very large (~240KB). Fourthly, +# reversing this regex (for reverse word iteration) results in a >19MB DFA. +# Yes. That's MB. Wat. And it took 5 minutes to build. +# +# I think we might consider changing our approach to this problem. The normal +# path I've seen, I think, is to decode codepoints one at a time, and then +# thread them through a state machine in the code itself. We could take this +# approach, or possibly combine it with a DFA that tells us which Word_Break +# value a codepoint has. I'd prefer the latter approach, but it requires adding +# RegexSet support to regex-automata. Something that should definitely be done, +# but is a fair amount of work. +# +# Gah. + +CR="\p{wb=CR}" +LF="\p{wb=LF}" +Newline="\p{wb=Newline}" +ZWJ="\p{wb=ZWJ}" +RI="\p{wb=Regional_Indicator}" +Katakana="\p{wb=Katakana}" +HebrewLet="\p{wb=HebrewLetter}" +ALetter="\p{wb=ALetter}" +SingleQuote="\p{wb=SingleQuote}" +DoubleQuote="\p{wb=DoubleQuote}" +MidNumLet="\p{wb=MidNumLet}" +MidLetter="\p{wb=MidLetter}" +MidNum="\p{wb=MidNum}" +Numeric="\p{wb=Numeric}" +ExtendNumLet="\p{wb=ExtendNumLet}" +WSegSpace="\p{wb=WSegSpace}" + +Any="\p{any}" +Ex="[\p{wb=Extend} \p{wb=Format} $ZWJ]" +ExtendPict="\p{Extended_Pictographic}" +AHLetter="[$ALetter $HebrewLet]" +MidNumLetQ="[$MidNumLet $SingleQuote]" + +AHLetterRepeat="$AHLetter $Ex* ([$MidLetter $MidNumLetQ] $Ex* $AHLetter $Ex*)*" +NumericRepeat="$Numeric $Ex* ([$MidNum $MidNumLetQ] $Ex* $Numeric $Ex*)*" + +echo "(?x) +$CR $LF +| +[$Newline $CR $LF] +| +$WSegSpace $WSegSpace+ +| +( + ([^$Newline $CR $LF]? $Ex* $ZWJ $ExtendPict $Ex*)+ + | + ($ExtendNumLet $Ex*)* $AHLetter $Ex* + ( + ( + ($NumericRepeat | $ExtendNumLet $Ex*)* + | + [$MidLetter $MidNumLetQ] $Ex* + ) + $AHLetter $Ex* + )+ + ($NumericRepeat | $ExtendNumLet $Ex*)* + | + ($ExtendNumLet $Ex*)* $AHLetter $Ex* ($NumericRepeat | $ExtendNumLet $Ex*)+ + | + ($ExtendNumLet $Ex*)* $Numeric $Ex* + ( + ( + ($AHLetterRepeat | $ExtendNumLet $Ex*)* + | + [$MidNum $MidNumLetQ] $Ex* + ) + $Numeric $Ex* + )+ + ($AHLetterRepeat | $ExtendNumLet $Ex*)* + | + ($ExtendNumLet $Ex*)* $Numeric $Ex* ($AHLetterRepeat | $ExtendNumLet $Ex*)+ + | + $Katakana $Ex* + (($Katakana | $ExtendNumLet) $Ex*)+ + | + $ExtendNumLet $Ex* + (($ExtendNumLet | $AHLetter | $Numeric | $Katakana) $Ex*)+ +)+ +| +$HebrewLet $Ex* $SingleQuote $Ex* +| +($HebrewLet $Ex* $DoubleQuote $Ex*)+ $HebrewLet $Ex* +| +$RI $Ex* $RI $Ex* +| +$Any $Ex* +" |