diff options
Diffstat (limited to 'vendor/regex/UNICODE.md')
| -rw-r--r-- | vendor/regex/UNICODE.md | 259 |
1 files changed, 259 insertions, 0 deletions
diff --git a/vendor/regex/UNICODE.md b/vendor/regex/UNICODE.md new file mode 100644 index 000000000..df7d21ed9 --- /dev/null +++ b/vendor/regex/UNICODE.md @@ -0,0 +1,259 @@ +# Unicode conformance + +This document describes the regex crate's conformance to Unicode's +[UTS#18](https://unicode.org/reports/tr18/) +report, which lays out 3 levels of support: Basic, Extended and Tailored. + +Full support for Level 1 ("Basic Unicode Support") is provided with two +exceptions: + +1. Line boundaries are not Unicode aware. Namely, only the `\n` + (`END OF LINE`) character is recognized as a line boundary. +2. The compatibility properties specified by + [RL1.2a](https://unicode.org/reports/tr18/#RL1.2a) + are ASCII-only definitions. + +Little to no support is provided for either Level 2 or Level 3. For the most +part, this is because the features are either complex/hard to implement, or at +the very least, very difficult to implement without sacrificing performance. +For example, tackling canonical equivalence such that matching worked as one +would expect regardless of normalization form would be a significant +undertaking. This is at least partially a result of the fact that this regex +engine is based on finite automata, which admits less flexibility normally +associated with backtracking implementations. + + +## RL1.1 Hex Notation + +[UTS#18 RL1.1](https://unicode.org/reports/tr18/#Hex_notation) + +Hex Notation refers to the ability to specify a Unicode code point in a regular +expression via its hexadecimal code point representation. This is useful in +environments that have poor Unicode font rendering or if you need to express a +code point that is not normally displayable. All forms of hexadecimal notation +are supported + + \x7F hex character code (exactly two digits) + \x{10FFFF} any hex character code corresponding to a Unicode code point + \u007F hex character code (exactly four digits) + \u{7F} any hex character code corresponding to a Unicode code point + \U0000007F hex character code (exactly eight digits) + \U{7F} any hex character code corresponding to a Unicode code point + +Briefly, the `\x{...}`, `\u{...}` and `\U{...}` are all exactly equivalent ways +of expressing hexadecimal code points. Any number of digits can be written +within the brackets. In contrast, `\xNN`, `\uNNNN`, `\UNNNNNNNN` are all +fixed-width variants of the same idea. + +Note that when Unicode mode is disabled, any non-ASCII Unicode codepoint is +banned. Additionally, the `\xNN` syntax represents arbitrary bytes when Unicode +mode is disabled. That is, the regex `\xFF` matches the Unicode codepoint +U+00FF (encoded as `\xC3\xBF` in UTF-8) while the regex `(?-u)\xFF` matches +the literal byte `\xFF`. + + +## RL1.2 Properties + +[UTS#18 RL1.2](https://unicode.org/reports/tr18/#Categories) + +Full support for Unicode property syntax is provided. Unicode properties +provide a convenient way to construct character classes of groups of code +points specified by Unicode. The regex crate does not provide exhaustive +support, but covers a useful subset. In particular: + +* [General categories](https://unicode.org/reports/tr18/#General_Category_Property) +* [Scripts and Script Extensions](https://unicode.org/reports/tr18/#Script_Property) +* [Age](https://unicode.org/reports/tr18/#Age) +* A smattering of boolean properties, including all of those specified by + [RL1.2](https://unicode.org/reports/tr18/#RL1.2) explicitly. + +In all cases, property name and value abbreviations are supported, and all +names/values are matched loosely without regard for case, whitespace or +underscores. Property name aliases can be found in Unicode's +[`PropertyAliases.txt`](https://www.unicode.org/Public/UCD/latest/ucd/PropertyAliases.txt) +file, while property value aliases can be found in Unicode's +[`PropertyValueAliases.txt`](https://www.unicode.org/Public/UCD/latest/ucd/PropertyValueAliases.txt) +file. + +The syntax supported is also consistent with the UTS#18 recommendation: + +* `\p{Greek}` selects the `Greek` script. Equivalent expressions follow: + `\p{sc:Greek}`, `\p{Script:Greek}`, `\p{Sc=Greek}`, `\p{script=Greek}`, + `\P{sc!=Greek}`. Similarly for `General_Category` (or `gc` for short) and + `Script_Extensions` (or `scx` for short). +* `\p{age:3.2}` selects all code points in Unicode 3.2. +* `\p{Alphabetic}` selects the "alphabetic" property and can be abbreviated + via `\p{alpha}` (for example). +* Single letter variants for properties with single letter abbreviations. + For example, `\p{Letter}` can be equivalently written as `\pL`. + +The following is a list of all properties supported by the regex crate (starred +properties correspond to properties required by RL1.2): + +* `General_Category` \* (including `Any`, `ASCII` and `Assigned`) +* `Script` \* +* `Script_Extensions` \* +* `Age` +* `ASCII_Hex_Digit` +* `Alphabetic` \* +* `Bidi_Control` +* `Case_Ignorable` +* `Cased` +* `Changes_When_Casefolded` +* `Changes_When_Casemapped` +* `Changes_When_Lowercased` +* `Changes_When_Titlecased` +* `Changes_When_Uppercased` +* `Dash` +* `Default_Ignorable_Code_Point` \* +* `Deprecated` +* `Diacritic` +* `Emoji` +* `Emoji_Presentation` +* `Emoji_Modifier` +* `Emoji_Modifier_Base` +* `Emoji_Component` +* `Extended_Pictographic` +* `Extender` +* `Grapheme_Base` +* `Grapheme_Cluster_Break` +* `Grapheme_Extend` +* `Hex_Digit` +* `IDS_Binary_Operator` +* `IDS_Trinary_Operator` +* `ID_Continue` +* `ID_Start` +* `Join_Control` +* `Logical_Order_Exception` +* `Lowercase` \* +* `Math` +* `Noncharacter_Code_Point` \* +* `Pattern_Syntax` +* `Pattern_White_Space` +* `Prepended_Concatenation_Mark` +* `Quotation_Mark` +* `Radical` +* `Regional_Indicator` +* `Sentence_Break` +* `Sentence_Terminal` +* `Soft_Dotted` +* `Terminal_Punctuation` +* `Unified_Ideograph` +* `Uppercase` \* +* `Variation_Selector` +* `White_Space` \* +* `Word_Break` +* `XID_Continue` +* `XID_Start` + + +## RL1.2a Compatibility Properties + +[UTS#18 RL1.2a](https://unicode.org/reports/tr18/#RL1.2a) + +The regex crate only provides ASCII definitions of the +[compatibility properties documented in UTS#18 Annex C](https://unicode.org/reports/tr18/#Compatibility_Properties) +(sans the `\X` class, for matching grapheme clusters, which isn't provided +at all). This is because it seems to be consistent with most other regular +expression engines, and in particular, because these are often referred to as +"ASCII" or "POSIX" character classes. + +Note that the `\w`, `\s` and `\d` character classes **are** Unicode aware. +Their traditional ASCII definition can be used by disabling Unicode. That is, +`[[:word:]]` and `(?-u)\w` are equivalent. + + +## RL1.3 Subtraction and Intersection + +[UTS#18 RL1.3](https://unicode.org/reports/tr18/#Subtraction_and_Intersection) + +The regex crate provides full support for nested character classes, along with +union, intersection (`&&`), difference (`--`) and symmetric difference (`~~`) +operations on arbitrary character classes. + +For example, to match all non-ASCII letters, you could use either +`[\p{Letter}--\p{Ascii}]` (difference) or `[\p{Letter}&&[^\p{Ascii}]]` +(intersecting the negation). + + +## RL1.4 Simple Word Boundaries + +[UTS#18 RL1.4](https://unicode.org/reports/tr18/#Simple_Word_Boundaries) + +The regex crate provides basic Unicode aware word boundary assertions. A word +boundary assertion can be written as `\b`, or `\B` as its negation. A word +boundary negation corresponds to a zero-width match, where its adjacent +characters correspond to word and non-word, or non-word and word characters. + +Conformance in this case chooses to define word character in the same way that +the `\w` character class is defined: a code point that is a member of one of +the following classes: + +* `\p{Alphabetic}` +* `\p{Join_Control}` +* `\p{gc:Mark}` +* `\p{gc:Decimal_Number}` +* `\p{gc:Connector_Punctuation}` + +In particular, this differs slightly from the +[prescription given in RL1.4](https://unicode.org/reports/tr18/#Simple_Word_Boundaries) +but is permissible according to +[UTS#18 Annex C](https://unicode.org/reports/tr18/#Compatibility_Properties). +Namely, it is convenient and simpler to have `\w` and `\b` be in sync with +one another. + +Finally, Unicode word boundaries can be disabled, which will cause ASCII word +boundaries to be used instead. That is, `\b` is a Unicode word boundary while +`(?-u)\b` is an ASCII-only word boundary. This can occasionally be beneficial +if performance is important, since the implementation of Unicode word +boundaries is currently sub-optimal on non-ASCII text. + + +## RL1.5 Simple Loose Matches + +[UTS#18 RL1.5](https://unicode.org/reports/tr18/#Simple_Loose_Matches) + +The regex crate provides full support for case insensitive matching in +accordance with RL1.5. That is, it uses the "simple" case folding mapping. The +"simple" mapping was chosen because of a key convenient property: every +"simple" mapping is a mapping from exactly one code point to exactly one other +code point. This makes case insensitive matching of character classes, for +example, straight-forward to implement. + +When case insensitive mode is enabled (e.g., `(?i)[a]` is equivalent to `a|A`), +then all characters classes are case folded as well. + + +## RL1.6 Line Boundaries + +[UTS#18 RL1.6](https://unicode.org/reports/tr18/#Line_Boundaries) + +The regex crate only provides support for recognizing the `\n` (`END OF LINE`) +character as a line boundary. This choice was made mostly for implementation +convenience, and to avoid performance cliffs that Unicode word boundaries are +subject to. + +Ideally, it would be nice to at least support `\r\n` as a line boundary as +well, and in theory, this could be done efficiently. + + +## RL1.7 Code Points + +[UTS#18 RL1.7](https://unicode.org/reports/tr18/#Supplementary_Characters) + +The regex crate provides full support for Unicode code point matching. Namely, +the fundamental atom of any match is always a single code point. + +Given Rust's strong ties to UTF-8, the following guarantees are also provided: + +* All matches are reported on valid UTF-8 code unit boundaries. That is, any + match range returned by the public regex API is guaranteed to successfully + slice the string that was searched. +* By consequence of the above, it is impossible to match surrogode code points. + No support for UTF-16 is provided, so this is never necessary. + +Note that when Unicode mode is disabled, the fundamental atom of matching is +no longer a code point but a single byte. When Unicode mode is disabled, many +Unicode features are disabled as well. For example, `(?-u)\pL` is not a valid +regex but `\pL(?-u)\xFF` (matches any Unicode `Letter` followed by the literal +byte `\xFF`) is, for example. |