diff options
Diffstat (limited to 'vendor/tokio/src/sync/broadcast.rs')
| -rw-r--r-- | vendor/tokio/src/sync/broadcast.rs | 1078 |
1 files changed, 1078 insertions, 0 deletions
diff --git a/vendor/tokio/src/sync/broadcast.rs b/vendor/tokio/src/sync/broadcast.rs new file mode 100644 index 000000000..a2ca4459e --- /dev/null +++ b/vendor/tokio/src/sync/broadcast.rs @@ -0,0 +1,1078 @@ +//! A multi-producer, multi-consumer broadcast queue. Each sent value is seen by +//! all consumers. +//! +//! A [`Sender`] is used to broadcast values to **all** connected [`Receiver`] +//! values. [`Sender`] handles are clone-able, allowing concurrent send and +//! receive actions. [`Sender`] and [`Receiver`] are both `Send` and `Sync` as +//! long as `T` is also `Send` or `Sync` respectively. +//! +//! When a value is sent, **all** [`Receiver`] handles are notified and will +//! receive the value. The value is stored once inside the channel and cloned on +//! demand for each receiver. Once all receivers have received a clone of the +//! value, the value is released from the channel. +//! +//! A channel is created by calling [`channel`], specifying the maximum number +//! of messages the channel can retain at any given time. +//! +//! New [`Receiver`] handles are created by calling [`Sender::subscribe`]. The +//! returned [`Receiver`] will receive values sent **after** the call to +//! `subscribe`. +//! +//! ## Lagging +//! +//! As sent messages must be retained until **all** [`Receiver`] handles receive +//! a clone, broadcast channels are susceptible to the "slow receiver" problem. +//! In this case, all but one receiver are able to receive values at the rate +//! they are sent. Because one receiver is stalled, the channel starts to fill +//! up. +//! +//! This broadcast channel implementation handles this case by setting a hard +//! upper bound on the number of values the channel may retain at any given +//! time. This upper bound is passed to the [`channel`] function as an argument. +//! +//! If a value is sent when the channel is at capacity, the oldest value +//! currently held by the channel is released. This frees up space for the new +//! value. Any receiver that has not yet seen the released value will return +//! [`RecvError::Lagged`] the next time [`recv`] is called. +//! +//! Once [`RecvError::Lagged`] is returned, the lagging receiver's position is +//! updated to the oldest value contained by the channel. The next call to +//! [`recv`] will return this value. +//! +//! This behavior enables a receiver to detect when it has lagged so far behind +//! that data has been dropped. The caller may decide how to respond to this: +//! either by aborting its task or by tolerating lost messages and resuming +//! consumption of the channel. +//! +//! ## Closing +//! +//! When **all** [`Sender`] handles have been dropped, no new values may be +//! sent. At this point, the channel is "closed". Once a receiver has received +//! all values retained by the channel, the next call to [`recv`] will return +//! with [`RecvError::Closed`]. +//! +//! [`Sender`]: crate::sync::broadcast::Sender +//! [`Sender::subscribe`]: crate::sync::broadcast::Sender::subscribe +//! [`Receiver`]: crate::sync::broadcast::Receiver +//! [`channel`]: crate::sync::broadcast::channel +//! [`RecvError::Lagged`]: crate::sync::broadcast::error::RecvError::Lagged +//! [`RecvError::Closed`]: crate::sync::broadcast::error::RecvError::Closed +//! [`recv`]: crate::sync::broadcast::Receiver::recv +//! +//! # Examples +//! +//! Basic usage +//! +//! ``` +//! use tokio::sync::broadcast; +//! +//! #[tokio::main] +//! async fn main() { +//! let (tx, mut rx1) = broadcast::channel(16); +//! let mut rx2 = tx.subscribe(); +//! +//! tokio::spawn(async move { +//! assert_eq!(rx1.recv().await.unwrap(), 10); +//! assert_eq!(rx1.recv().await.unwrap(), 20); +//! }); +//! +//! tokio::spawn(async move { +//! assert_eq!(rx2.recv().await.unwrap(), 10); +//! assert_eq!(rx2.recv().await.unwrap(), 20); +//! }); +//! +//! tx.send(10).unwrap(); +//! tx.send(20).unwrap(); +//! } +//! ``` +//! +//! Handling lag +//! +//! ``` +//! use tokio::sync::broadcast; +//! +//! #[tokio::main] +//! async fn main() { +//! let (tx, mut rx) = broadcast::channel(2); +//! +//! tx.send(10).unwrap(); +//! tx.send(20).unwrap(); +//! tx.send(30).unwrap(); +//! +//! // The receiver lagged behind +//! assert!(rx.recv().await.is_err()); +//! +//! // At this point, we can abort or continue with lost messages +//! +//! assert_eq!(20, rx.recv().await.unwrap()); +//! assert_eq!(30, rx.recv().await.unwrap()); +//! } +//! ``` + +use crate::loom::cell::UnsafeCell; +use crate::loom::sync::atomic::AtomicUsize; +use crate::loom::sync::{Arc, Mutex, RwLock, RwLockReadGuard}; +use crate::util::linked_list::{self, LinkedList}; + +use std::fmt; +use std::future::Future; +use std::marker::PhantomPinned; +use std::pin::Pin; +use std::ptr::NonNull; +use std::sync::atomic::Ordering::SeqCst; +use std::task::{Context, Poll, Waker}; +use std::usize; + +/// Sending-half of the [`broadcast`] channel. +/// +/// May be used from many threads. Messages can be sent with +/// [`send`][Sender::send]. +/// +/// # Examples +/// +/// ``` +/// use tokio::sync::broadcast; +/// +/// #[tokio::main] +/// async fn main() { +/// let (tx, mut rx1) = broadcast::channel(16); +/// let mut rx2 = tx.subscribe(); +/// +/// tokio::spawn(async move { +/// assert_eq!(rx1.recv().await.unwrap(), 10); +/// assert_eq!(rx1.recv().await.unwrap(), 20); +/// }); +/// +/// tokio::spawn(async move { +/// assert_eq!(rx2.recv().await.unwrap(), 10); +/// assert_eq!(rx2.recv().await.unwrap(), 20); +/// }); +/// +/// tx.send(10).unwrap(); +/// tx.send(20).unwrap(); +/// } +/// ``` +/// +/// [`broadcast`]: crate::sync::broadcast +pub struct Sender<T> { + shared: Arc<Shared<T>>, +} + +/// Receiving-half of the [`broadcast`] channel. +/// +/// Must not be used concurrently. Messages may be retrieved using +/// [`recv`][Receiver::recv]. +/// +/// To turn this receiver into a `Stream`, you can use the [`BroadcastStream`] +/// wrapper. +/// +/// [`BroadcastStream`]: https://docs.rs/tokio-stream/0.1/tokio_stream/wrappers/struct.BroadcastStream.html +/// +/// # Examples +/// +/// ``` +/// use tokio::sync::broadcast; +/// +/// #[tokio::main] +/// async fn main() { +/// let (tx, mut rx1) = broadcast::channel(16); +/// let mut rx2 = tx.subscribe(); +/// +/// tokio::spawn(async move { +/// assert_eq!(rx1.recv().await.unwrap(), 10); +/// assert_eq!(rx1.recv().await.unwrap(), 20); +/// }); +/// +/// tokio::spawn(async move { +/// assert_eq!(rx2.recv().await.unwrap(), 10); +/// assert_eq!(rx2.recv().await.unwrap(), 20); +/// }); +/// +/// tx.send(10).unwrap(); +/// tx.send(20).unwrap(); +/// } +/// ``` +/// +/// [`broadcast`]: crate::sync::broadcast +pub struct Receiver<T> { + /// State shared with all receivers and senders. + shared: Arc<Shared<T>>, + + /// Next position to read from + next: u64, +} + +pub mod error { + //! Broadcast error types + + use std::fmt; + + /// Error returned by from the [`send`] function on a [`Sender`]. + /// + /// A **send** operation can only fail if there are no active receivers, + /// implying that the message could never be received. The error contains the + /// message being sent as a payload so it can be recovered. + /// + /// [`send`]: crate::sync::broadcast::Sender::send + /// [`Sender`]: crate::sync::broadcast::Sender + #[derive(Debug)] + pub struct SendError<T>(pub T); + + impl<T> fmt::Display for SendError<T> { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + write!(f, "channel closed") + } + } + + impl<T: fmt::Debug> std::error::Error for SendError<T> {} + + /// An error returned from the [`recv`] function on a [`Receiver`]. + /// + /// [`recv`]: crate::sync::broadcast::Receiver::recv + /// [`Receiver`]: crate::sync::broadcast::Receiver + #[derive(Debug, PartialEq)] + pub enum RecvError { + /// There are no more active senders implying no further messages will ever + /// be sent. + Closed, + + /// The receiver lagged too far behind. Attempting to receive again will + /// return the oldest message still retained by the channel. + /// + /// Includes the number of skipped messages. + Lagged(u64), + } + + impl fmt::Display for RecvError { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + match self { + RecvError::Closed => write!(f, "channel closed"), + RecvError::Lagged(amt) => write!(f, "channel lagged by {}", amt), + } + } + } + + impl std::error::Error for RecvError {} + + /// An error returned from the [`try_recv`] function on a [`Receiver`]. + /// + /// [`try_recv`]: crate::sync::broadcast::Receiver::try_recv + /// [`Receiver`]: crate::sync::broadcast::Receiver + #[derive(Debug, PartialEq)] + pub enum TryRecvError { + /// The channel is currently empty. There are still active + /// [`Sender`] handles, so data may yet become available. + /// + /// [`Sender`]: crate::sync::broadcast::Sender + Empty, + + /// There are no more active senders implying no further messages will ever + /// be sent. + Closed, + + /// The receiver lagged too far behind and has been forcibly disconnected. + /// Attempting to receive again will return the oldest message still + /// retained by the channel. + /// + /// Includes the number of skipped messages. + Lagged(u64), + } + + impl fmt::Display for TryRecvError { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + match self { + TryRecvError::Empty => write!(f, "channel empty"), + TryRecvError::Closed => write!(f, "channel closed"), + TryRecvError::Lagged(amt) => write!(f, "channel lagged by {}", amt), + } + } + } + + impl std::error::Error for TryRecvError {} +} + +use self::error::*; + +/// Data shared between senders and receivers +struct Shared<T> { + /// slots in the channel + buffer: Box<[RwLock<Slot<T>>]>, + + /// Mask a position -> index + mask: usize, + + /// Tail of the queue. Includes the rx wait list. + tail: Mutex<Tail>, + + /// Number of outstanding Sender handles + num_tx: AtomicUsize, +} + +/// Next position to write a value +struct Tail { + /// Next position to write to + pos: u64, + + /// Number of active receivers + rx_cnt: usize, + + /// True if the channel is closed + closed: bool, + + /// Receivers waiting for a value + waiters: LinkedList<Waiter, <Waiter as linked_list::Link>::Target>, +} + +/// Slot in the buffer +struct Slot<T> { + /// Remaining number of receivers that are expected to see this value. + /// + /// When this goes to zero, the value is released. + /// + /// An atomic is used as it is mutated concurrently with the slot read lock + /// acquired. + rem: AtomicUsize, + + /// Uniquely identifies the `send` stored in the slot + pos: u64, + + /// True signals the channel is closed. + closed: bool, + + /// The value being broadcast. + /// + /// The value is set by `send` when the write lock is held. When a reader + /// drops, `rem` is decremented. When it hits zero, the value is dropped. + val: UnsafeCell<Option<T>>, +} + +/// An entry in the wait queue +struct Waiter { + /// True if queued + queued: bool, + + /// Task waiting on the broadcast channel. + waker: Option<Waker>, + + /// Intrusive linked-list pointers. + pointers: linked_list::Pointers<Waiter>, + + /// Should not be `Unpin`. + _p: PhantomPinned, +} + +struct RecvGuard<'a, T> { + slot: RwLockReadGuard<'a, Slot<T>>, +} + +/// Receive a value future +struct Recv<'a, T> { + /// Receiver being waited on + receiver: &'a mut Receiver<T>, + + /// Entry in the waiter `LinkedList` + waiter: UnsafeCell<Waiter>, +} + +unsafe impl<'a, T: Send> Send for Recv<'a, T> {} +unsafe impl<'a, T: Send> Sync for Recv<'a, T> {} + +/// Max number of receivers. Reserve space to lock. +const MAX_RECEIVERS: usize = usize::MAX >> 2; + +/// Create a bounded, multi-producer, multi-consumer channel where each sent +/// value is broadcasted to all active receivers. +/// +/// All data sent on [`Sender`] will become available on every active +/// [`Receiver`] in the same order as it was sent. +/// +/// The `Sender` can be cloned to `send` to the same channel from multiple +/// points in the process or it can be used concurrently from an `Arc`. New +/// `Receiver` handles are created by calling [`Sender::subscribe`]. +/// +/// If all [`Receiver`] handles are dropped, the `send` method will return a +/// [`SendError`]. Similarly, if all [`Sender`] handles are dropped, the [`recv`] +/// method will return a [`RecvError`]. +/// +/// [`Sender`]: crate::sync::broadcast::Sender +/// [`Sender::subscribe`]: crate::sync::broadcast::Sender::subscribe +/// [`Receiver`]: crate::sync::broadcast::Receiver +/// [`recv`]: crate::sync::broadcast::Receiver::recv +/// [`SendError`]: crate::sync::broadcast::error::SendError +/// [`RecvError`]: crate::sync::broadcast::error::RecvError +/// +/// # Examples +/// +/// ``` +/// use tokio::sync::broadcast; +/// +/// #[tokio::main] +/// async fn main() { +/// let (tx, mut rx1) = broadcast::channel(16); +/// let mut rx2 = tx.subscribe(); +/// +/// tokio::spawn(async move { +/// assert_eq!(rx1.recv().await.unwrap(), 10); +/// assert_eq!(rx1.recv().await.unwrap(), 20); +/// }); +/// +/// tokio::spawn(async move { +/// assert_eq!(rx2.recv().await.unwrap(), 10); +/// assert_eq!(rx2.recv().await.unwrap(), 20); +/// }); +/// +/// tx.send(10).unwrap(); +/// tx.send(20).unwrap(); +/// } +/// ``` +pub fn channel<T: Clone>(mut capacity: usize) -> (Sender<T>, Receiver<T>) { + assert!(capacity > 0, "capacity is empty"); + assert!(capacity <= usize::MAX >> 1, "requested capacity too large"); + + // Round to a power of two + capacity = capacity.next_power_of_two(); + + let mut buffer = Vec::with_capacity(capacity); + + for i in 0..capacity { + buffer.push(RwLock::new(Slot { + rem: AtomicUsize::new(0), + pos: (i as u64).wrapping_sub(capacity as u64), + closed: false, + val: UnsafeCell::new(None), + })); + } + + let shared = Arc::new(Shared { + buffer: buffer.into_boxed_slice(), + mask: capacity - 1, + tail: Mutex::new(Tail { + pos: 0, + rx_cnt: 1, + closed: false, + waiters: LinkedList::new(), + }), + num_tx: AtomicUsize::new(1), + }); + + let rx = Receiver { + shared: shared.clone(), + next: 0, + }; + + let tx = Sender { shared }; + + (tx, rx) +} + +unsafe impl<T: Send> Send for Sender<T> {} +unsafe impl<T: Send> Sync for Sender<T> {} + +unsafe impl<T: Send> Send for Receiver<T> {} +unsafe impl<T: Send> Sync for Receiver<T> {} + +impl<T> Sender<T> { + /// Attempts to send a value to all active [`Receiver`] handles, returning + /// it back if it could not be sent. + /// + /// A successful send occurs when there is at least one active [`Receiver`] + /// handle. An unsuccessful send would be one where all associated + /// [`Receiver`] handles have already been dropped. + /// + /// # Return + /// + /// On success, the number of subscribed [`Receiver`] handles is returned. + /// This does not mean that this number of receivers will see the message as + /// a receiver may drop before receiving the message. + /// + /// # Note + /// + /// A return value of `Ok` **does not** mean that the sent value will be + /// observed by all or any of the active [`Receiver`] handles. [`Receiver`] + /// handles may be dropped before receiving the sent message. + /// + /// A return value of `Err` **does not** mean that future calls to `send` + /// will fail. New [`Receiver`] handles may be created by calling + /// [`subscribe`]. + /// + /// [`Receiver`]: crate::sync::broadcast::Receiver + /// [`subscribe`]: crate::sync::broadcast::Sender::subscribe + /// + /// # Examples + /// + /// ``` + /// use tokio::sync::broadcast; + /// + /// #[tokio::main] + /// async fn main() { + /// let (tx, mut rx1) = broadcast::channel(16); + /// let mut rx2 = tx.subscribe(); + /// + /// tokio::spawn(async move { + /// assert_eq!(rx1.recv().await.unwrap(), 10); + /// assert_eq!(rx1.recv().await.unwrap(), 20); + /// }); + /// + /// tokio::spawn(async move { + /// assert_eq!(rx2.recv().await.unwrap(), 10); + /// assert_eq!(rx2.recv().await.unwrap(), 20); + /// }); + /// + /// tx.send(10).unwrap(); + /// tx.send(20).unwrap(); + /// } + /// ``` + pub fn send(&self, value: T) -> Result<usize, SendError<T>> { + self.send2(Some(value)) + .map_err(|SendError(maybe_v)| SendError(maybe_v.unwrap())) + } + + /// Creates a new [`Receiver`] handle that will receive values sent **after** + /// this call to `subscribe`. + /// + /// # Examples + /// + /// ``` + /// use tokio::sync::broadcast; + /// + /// #[tokio::main] + /// async fn main() { + /// let (tx, _rx) = broadcast::channel(16); + /// + /// // Will not be seen + /// tx.send(10).unwrap(); + /// + /// let mut rx = tx.subscribe(); + /// + /// tx.send(20).unwrap(); + /// + /// let value = rx.recv().await.unwrap(); + /// assert_eq!(20, value); + /// } + /// ``` + pub fn subscribe(&self) -> Receiver<T> { + let shared = self.shared.clone(); + new_receiver(shared) + } + + /// Returns the number of active receivers + /// + /// An active receiver is a [`Receiver`] handle returned from [`channel`] or + /// [`subscribe`]. These are the handles that will receive values sent on + /// this [`Sender`]. + /// + /// # Note + /// + /// It is not guaranteed that a sent message will reach this number of + /// receivers. Active receivers may never call [`recv`] again before + /// dropping. + /// + /// [`recv`]: crate::sync::broadcast::Receiver::recv + /// [`Receiver`]: crate::sync::broadcast::Receiver + /// [`Sender`]: crate::sync::broadcast::Sender + /// [`subscribe`]: crate::sync::broadcast::Sender::subscribe + /// [`channel`]: crate::sync::broadcast::channel + /// + /// # Examples + /// + /// ``` + /// use tokio::sync::broadcast; + /// + /// #[tokio::main] + /// async fn main() { + /// let (tx, _rx1) = broadcast::channel(16); + /// + /// assert_eq!(1, tx.receiver_count()); + /// + /// let mut _rx2 = tx.subscribe(); + /// + /// assert_eq!(2, tx.receiver_count()); + /// + /// tx.send(10).unwrap(); + /// } + /// ``` + pub fn receiver_count(&self) -> usize { + let tail = self.shared.tail.lock(); + tail.rx_cnt + } + + fn send2(&self, value: Option<T>) -> Result<usize, SendError<Option<T>>> { + let mut tail = self.shared.tail.lock(); + + if tail.rx_cnt == 0 { + return Err(SendError(value)); + } + + // Position to write into + let pos = tail.pos; + let rem = tail.rx_cnt; + let idx = (pos & self.shared.mask as u64) as usize; + + // Update the tail position + tail.pos = tail.pos.wrapping_add(1); + + // Get the slot + let mut slot = self.shared.buffer[idx].write().unwrap(); + + // Track the position + slot.pos = pos; + + // Set remaining receivers + slot.rem.with_mut(|v| *v = rem); + + // Set the closed bit if the value is `None`; otherwise write the value + if value.is_none() { + tail.closed = true; + slot.closed = true; + } else { + slot.val.with_mut(|ptr| unsafe { *ptr = value }); + } + + // Release the slot lock before notifying the receivers. + drop(slot); + + tail.notify_rx(); + + // Release the mutex. This must happen after the slot lock is released, + // otherwise the writer lock bit could be cleared while another thread + // is in the critical section. + drop(tail); + + Ok(rem) + } +} + +fn new_receiver<T>(shared: Arc<Shared<T>>) -> Receiver<T> { + let mut tail = shared.tail.lock(); + + if tail.rx_cnt == MAX_RECEIVERS { + panic!("max receivers"); + } + + tail.rx_cnt = tail.rx_cnt.checked_add(1).expect("overflow"); + + let next = tail.pos; + + drop(tail); + + Receiver { shared, next } +} + +impl Tail { + fn notify_rx(&mut self) { + while let Some(mut waiter) = self.waiters.pop_back() { + // Safety: `waiters` lock is still held. + let waiter = unsafe { waiter.as_mut() }; + + assert!(waiter.queued); + waiter.queued = false; + + let waker = waiter.waker.take().unwrap(); + waker.wake(); + } + } +} + +impl<T> Clone for Sender<T> { + fn clone(&self) -> Sender<T> { + let shared = self.shared.clone(); + shared.num_tx.fetch_add(1, SeqCst); + + Sender { shared } + } +} + +impl<T> Drop for Sender<T> { + fn drop(&mut self) { + if 1 == self.shared.num_tx.fetch_sub(1, SeqCst) { + let _ = self.send2(None); + } + } +} + +impl<T> Receiver<T> { + /// Locks the next value if there is one. + fn recv_ref( + &mut self, + waiter: Option<(&UnsafeCell<Waiter>, &Waker)>, + ) -> Result<RecvGuard<'_, T>, TryRecvError> { + let idx = (self.next & self.shared.mask as u64) as usize; + + // The slot holding the next value to read + let mut slot = self.shared.buffer[idx].read().unwrap(); + + if slot.pos != self.next { + let next_pos = slot.pos.wrapping_add(self.shared.buffer.len() as u64); + + // The receiver has read all current values in the channel and there + // is no waiter to register + if waiter.is_none() && next_pos == self.next { + return Err(TryRecvError::Empty); + } + + // Release the `slot` lock before attempting to acquire the `tail` + // lock. This is required because `send2` acquires the tail lock + // first followed by the slot lock. Acquiring the locks in reverse + // order here would result in a potential deadlock: `recv_ref` + // acquires the `slot` lock and attempts to acquire the `tail` lock + // while `send2` acquired the `tail` lock and attempts to acquire + // the slot lock. + drop(slot); + + let mut tail = self.shared.tail.lock(); + + // Acquire slot lock again + slot = self.shared.buffer[idx].read().unwrap(); + + // Make sure the position did not change. This could happen in the + // unlikely event that the buffer is wrapped between dropping the + // read lock and acquiring the tail lock. + if slot.pos != self.next { + let next_pos = slot.pos.wrapping_add(self.shared.buffer.len() as u64); + + if next_pos == self.next { + // Store the waker + if let Some((waiter, waker)) = waiter { + // Safety: called while locked. + unsafe { + // Only queue if not already queued + waiter.with_mut(|ptr| { + // If there is no waker **or** if the currently + // stored waker references a **different** task, + // track the tasks' waker to be notified on + // receipt of a new value. + match (*ptr).waker { + Some(ref w) if w.will_wake(waker) => {} + _ => { + (*ptr).waker = Some(waker.clone()); + } + } + + if !(*ptr).queued { + (*ptr).queued = true; + tail.waiters.push_front(NonNull::new_unchecked(&mut *ptr)); + } + }); + } + } + + return Err(TryRecvError::Empty); + } + + // At this point, the receiver has lagged behind the sender by + // more than the channel capacity. The receiver will attempt to + // catch up by skipping dropped messages and setting the + // internal cursor to the **oldest** message stored by the + // channel. + // + // However, finding the oldest position is a bit more + // complicated than `tail-position - buffer-size`. When + // the channel is closed, the tail position is incremented to + // signal a new `None` message, but `None` is not stored in the + // channel itself (see issue #2425 for why). + // + // To account for this, if the channel is closed, the tail + // position is decremented by `buffer-size + 1`. + let mut adjust = 0; + if tail.closed { + adjust = 1 + } + let next = tail + .pos + .wrapping_sub(self.shared.buffer.len() as u64 + adjust); + + let missed = next.wrapping_sub(self.next); + + drop(tail); + + // The receiver is slow but no values have been missed + if missed == 0 { + self.next = self.next.wrapping_add(1); + + return Ok(RecvGuard { slot }); + } + + self.next = next; + + return Err(TryRecvError::Lagged(missed)); + } + } + + self.next = self.next.wrapping_add(1); + + if slot.closed { + return Err(TryRecvError::Closed); + } + + Ok(RecvGuard { slot }) + } +} + +impl<T: Clone> Receiver<T> { + /// Receives the next value for this receiver. + /// + /// Each [`Receiver`] handle will receive a clone of all values sent + /// **after** it has subscribed. + /// + /// `Err(RecvError::Closed)` is returned when all `Sender` halves have + /// dropped, indicating that no further values can be sent on the channel. + /// + /// If the [`Receiver`] handle falls behind, once the channel is full, newly + /// sent values will overwrite old values. At this point, a call to [`recv`] + /// will return with `Err(RecvError::Lagged)` and the [`Receiver`]'s + /// internal cursor is updated to point to the oldest value still held by + /// the channel. A subsequent call to [`recv`] will return this value + /// **unless** it has been since overwritten. + /// + /// # Cancel safety + /// + /// This method is cancel safe. If `recv` is used as the event in a + /// [`tokio::select!`](crate::select) statement and some other branch + /// completes first, it is guaranteed that no messages were received on this + /// channel. + /// + /// [`Receiver`]: crate::sync::broadcast::Receiver + /// [`recv`]: crate::sync::broadcast::Receiver::recv + /// + /// # Examples + /// + /// ``` + /// use tokio::sync::broadcast; + /// + /// #[tokio::main] + /// async fn main() { + /// let (tx, mut rx1) = broadcast::channel(16); + /// let mut rx2 = tx.subscribe(); + /// + /// tokio::spawn(async move { + /// assert_eq!(rx1.recv().await.unwrap(), 10); + /// assert_eq!(rx1.recv().await.unwrap(), 20); + /// }); + /// + /// tokio::spawn(async move { + /// assert_eq!(rx2.recv().await.unwrap(), 10); + /// assert_eq!(rx2.recv().await.unwrap(), 20); + /// }); + /// + /// tx.send(10).unwrap(); + /// tx.send(20).unwrap(); + /// } + /// ``` + /// + /// Handling lag + /// + /// ``` + /// use tokio::sync::broadcast; + /// + /// #[tokio::main] + /// async fn main() { + /// let (tx, mut rx) = broadcast::channel(2); + /// + /// tx.send(10).unwrap(); + /// tx.send(20).unwrap(); + /// tx.send(30).unwrap(); + /// + /// // The receiver lagged behind + /// assert!(rx.recv().await.is_err()); + /// + /// // At this point, we can abort or continue with lost messages + /// + /// assert_eq!(20, rx.recv().await.unwrap()); + /// assert_eq!(30, rx.recv().await.unwrap()); + /// } + /// ``` + pub async fn recv(&mut self) -> Result<T, RecvError> { + let fut = Recv::new(self); + fut.await + } + + /// Attempts to return a pending value on this receiver without awaiting. + /// + /// This is useful for a flavor of "optimistic check" before deciding to + /// await on a receiver. + /// + /// Compared with [`recv`], this function has three failure cases instead of two + /// (one for closed, one for an empty buffer, one for a lagging receiver). + /// + /// `Err(TryRecvError::Closed)` is returned when all `Sender` halves have + /// dropped, indicating that no further values can be sent on the channel. + /// + /// If the [`Receiver`] handle falls behind, once the channel is full, newly + /// sent values will overwrite old values. At this point, a call to [`recv`] + /// will return with `Err(TryRecvError::Lagged)` and the [`Receiver`]'s + /// internal cursor is updated to point to the oldest value still held by + /// the channel. A subsequent call to [`try_recv`] will return this value + /// **unless** it has been since overwritten. If there are no values to + /// receive, `Err(TryRecvError::Empty)` is returned. + /// + /// [`recv`]: crate::sync::broadcast::Receiver::recv + /// [`try_recv`]: crate::sync::broadcast::Receiver::try_recv + /// [`Receiver`]: crate::sync::broadcast::Receiver + /// + /// # Examples + /// + /// ``` + /// use tokio::sync::broadcast; + /// + /// #[tokio::main] + /// async fn main() { + /// let (tx, mut rx) = broadcast::channel(16); + /// + /// assert!(rx.try_recv().is_err()); + /// + /// tx.send(10).unwrap(); + /// + /// let value = rx.try_recv().unwrap(); + /// assert_eq!(10, value); + /// } + /// ``` + pub fn try_recv(&mut self) -> Result<T, TryRecvError> { + let guard = self.recv_ref(None)?; + guard.clone_value().ok_or(TryRecvError::Closed) + } +} + +impl<T> Drop for Receiver<T> { + fn drop(&mut self) { + let mut tail = self.shared.tail.lock(); + + tail.rx_cnt -= 1; + let until = tail.pos; + + drop(tail); + + while self.next < until { + match self.recv_ref(None) { + Ok(_) => {} + // The channel is closed + Err(TryRecvError::Closed) => break, + // Ignore lagging, we will catch up + Err(TryRecvError::Lagged(..)) => {} + // Can't be empty + Err(TryRecvError::Empty) => panic!("unexpected empty broadcast channel"), + } + } + } +} + +impl<'a, T> Recv<'a, T> { + fn new(receiver: &'a mut Receiver<T>) -> Recv<'a, T> { + Recv { + receiver, + waiter: UnsafeCell::new(Waiter { + queued: false, + waker: None, + pointers: linked_list::Pointers::new(), + _p: PhantomPinned, + }), + } + } + + /// A custom `project` implementation is used in place of `pin-project-lite` + /// as a custom drop implementation is needed. + fn project(self: Pin<&mut Self>) -> (&mut Receiver<T>, &UnsafeCell<Waiter>) { + unsafe { + // Safety: Receiver is Unpin + is_unpin::<&mut Receiver<T>>(); + + let me = self.get_unchecked_mut(); + (me.receiver, &me.waiter) + } + } +} + +impl<'a, T> Future for Recv<'a, T> +where + T: Clone, +{ + type Output = Result<T, RecvError>; + + fn poll(self: Pin<&mut Self>, cx: &mut Context<'_>) -> Poll<Result<T, RecvError>> { + let (receiver, waiter) = self.project(); + + let guard = match receiver.recv_ref(Some((waiter, cx.waker()))) { + Ok(value) => value, + Err(TryRecvError::Empty) => return Poll::Pending, + Err(TryRecvError::Lagged(n)) => return Poll::Ready(Err(RecvError::Lagged(n))), + Err(TryRecvError::Closed) => return Poll::Ready(Err(RecvError::Closed)), + }; + + Poll::Ready(guard.clone_value().ok_or(RecvError::Closed)) + } +} + +impl<'a, T> Drop for Recv<'a, T> { + fn drop(&mut self) { + // Acquire the tail lock. This is required for safety before accessing + // the waiter node. + let mut tail = self.receiver.shared.tail.lock(); + + // safety: tail lock is held + let queued = self.waiter.with(|ptr| unsafe { (*ptr).queued }); + + if queued { + // Remove the node + // + // safety: tail lock is held and the wait node is verified to be in + // the list. + unsafe { + self.waiter.with_mut(|ptr| { + tail.waiters.remove((&mut *ptr).into()); + }); + } + } + } +} + +/// # Safety +/// +/// `Waiter` is forced to be !Unpin. +unsafe impl linked_list::Link for Waiter { + type Handle = NonNull<Waiter>; + type Target = Waiter; + + fn as_raw(handle: &NonNull<Waiter>) -> NonNull<Waiter> { + *handle + } + + unsafe fn from_raw(ptr: NonNull<Waiter>) -> NonNull<Waiter> { + ptr + } + + unsafe fn pointers(mut target: NonNull<Waiter>) -> NonNull<linked_list::Pointers<Waiter>> { + NonNull::from(&mut target.as_mut().pointers) + } +} + +impl<T> fmt::Debug for Sender<T> { + fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result { + write!(fmt, "broadcast::Sender") + } +} + +impl<T> fmt::Debug for Receiver<T> { + fn fmt(&self, fmt: &mut fmt::Formatter<'_>) -> fmt::Result { + write!(fmt, "broadcast::Receiver") + } +} + +impl<'a, T> RecvGuard<'a, T> { + fn clone_value(&self) -> Option<T> + where + T: Clone, + { + self.slot.val.with(|ptr| unsafe { (*ptr).clone() }) + } +} + +impl<'a, T> Drop for RecvGuard<'a, T> { + fn drop(&mut self) { + // Decrement the remaining counter + if 1 == self.slot.rem.fetch_sub(1, SeqCst) { + // Safety: Last receiver, drop the value + self.slot.val.with_mut(|ptr| unsafe { *ptr = None }); + } + } +} + +fn is_unpin<T: Unpin>() {} |