From 698f8c2f01ea549d77d7dc3338a12e04c11057b9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 17 Apr 2024 14:02:58 +0200 Subject: Adding upstream version 1.64.0+dfsg1. Signed-off-by: Daniel Baumann --- library/std/src/io/buffered/linewritershim.rs | 276 ++++++++++++++++++++++++++ 1 file changed, 276 insertions(+) create mode 100644 library/std/src/io/buffered/linewritershim.rs (limited to 'library/std/src/io/buffered/linewritershim.rs') diff --git a/library/std/src/io/buffered/linewritershim.rs b/library/std/src/io/buffered/linewritershim.rs new file mode 100644 index 000000000..0175d2693 --- /dev/null +++ b/library/std/src/io/buffered/linewritershim.rs @@ -0,0 +1,276 @@ +use crate::io::{self, BufWriter, IoSlice, Write}; +use crate::sys_common::memchr; + +/// Private helper struct for implementing the line-buffered writing logic. +/// This shim temporarily wraps a BufWriter, and uses its internals to +/// implement a line-buffered writer (specifically by using the internal +/// methods like write_to_buf and flush_buf). In this way, a more +/// efficient abstraction can be created than one that only had access to +/// `write` and `flush`, without needlessly duplicating a lot of the +/// implementation details of BufWriter. This also allows existing +/// `BufWriters` to be temporarily given line-buffering logic; this is what +/// enables Stdout to be alternately in line-buffered or block-buffered mode. +#[derive(Debug)] +pub struct LineWriterShim<'a, W: Write> { + buffer: &'a mut BufWriter, +} + +impl<'a, W: Write> LineWriterShim<'a, W> { + pub fn new(buffer: &'a mut BufWriter) -> Self { + Self { buffer } + } + + /// Get a reference to the inner writer (that is, the writer + /// wrapped by the BufWriter). + fn inner(&self) -> &W { + self.buffer.get_ref() + } + + /// Get a mutable reference to the inner writer (that is, the writer + /// wrapped by the BufWriter). Be careful with this writer, as writes to + /// it will bypass the buffer. + fn inner_mut(&mut self) -> &mut W { + self.buffer.get_mut() + } + + /// Get the content currently buffered in self.buffer + fn buffered(&self) -> &[u8] { + self.buffer.buffer() + } + + /// Flush the buffer iff the last byte is a newline (indicating that an + /// earlier write only succeeded partially, and we want to retry flushing + /// the buffered line before continuing with a subsequent write) + fn flush_if_completed_line(&mut self) -> io::Result<()> { + match self.buffered().last().copied() { + Some(b'\n') => self.buffer.flush_buf(), + _ => Ok(()), + } + } +} + +impl<'a, W: Write> Write for LineWriterShim<'a, W> { + /// Write some data into this BufReader with line buffering. This means + /// that, if any newlines are present in the data, the data up to the last + /// newline is sent directly to the underlying writer, and data after it + /// is buffered. Returns the number of bytes written. + /// + /// This function operates on a "best effort basis"; in keeping with the + /// convention of `Write::write`, it makes at most one attempt to write + /// new data to the underlying writer. If that write only reports a partial + /// success, the remaining data will be buffered. + /// + /// Because this function attempts to send completed lines to the underlying + /// writer, it will also flush the existing buffer if it ends with a + /// newline, even if the incoming data does not contain any newlines. + fn write(&mut self, buf: &[u8]) -> io::Result { + let newline_idx = match memchr::memrchr(b'\n', buf) { + // If there are no new newlines (that is, if this write is less than + // one line), just do a regular buffered write (which may flush if + // we exceed the inner buffer's size) + None => { + self.flush_if_completed_line()?; + return self.buffer.write(buf); + } + // Otherwise, arrange for the lines to be written directly to the + // inner writer. + Some(newline_idx) => newline_idx + 1, + }; + + // Flush existing content to prepare for our write. We have to do this + // before attempting to write `buf` in order to maintain consistency; + // if we add `buf` to the buffer then try to flush it all at once, + // we're obligated to return Ok(), which would mean suppressing any + // errors that occur during flush. + self.buffer.flush_buf()?; + + // This is what we're going to try to write directly to the inner + // writer. The rest will be buffered, if nothing goes wrong. + let lines = &buf[..newline_idx]; + + // Write `lines` directly to the inner writer. In keeping with the + // `write` convention, make at most one attempt to add new (unbuffered) + // data. Because this write doesn't touch the BufWriter state directly, + // and the buffer is known to be empty, we don't need to worry about + // self.buffer.panicked here. + let flushed = self.inner_mut().write(lines)?; + + // If buffer returns Ok(0), propagate that to the caller without + // doing additional buffering; otherwise we're just guaranteeing + // an "ErrorKind::WriteZero" later. + if flushed == 0 { + return Ok(0); + } + + // Now that the write has succeeded, buffer the rest (or as much of + // the rest as possible). If there were any unwritten newlines, we + // only buffer out to the last unwritten newline that fits in the + // buffer; this helps prevent flushing partial lines on subsequent + // calls to LineWriterShim::write. + + // Handle the cases in order of most-common to least-common, under + // the presumption that most writes succeed in totality, and that most + // writes are smaller than the buffer. + // - Is this a partial line (ie, no newlines left in the unwritten tail) + // - If not, does the data out to the last unwritten newline fit in + // the buffer? + // - If not, scan for the last newline that *does* fit in the buffer + let tail = if flushed >= newline_idx { + &buf[flushed..] + } else if newline_idx - flushed <= self.buffer.capacity() { + &buf[flushed..newline_idx] + } else { + let scan_area = &buf[flushed..]; + let scan_area = &scan_area[..self.buffer.capacity()]; + match memchr::memrchr(b'\n', scan_area) { + Some(newline_idx) => &scan_area[..newline_idx + 1], + None => scan_area, + } + }; + + let buffered = self.buffer.write_to_buf(tail); + Ok(flushed + buffered) + } + + fn flush(&mut self) -> io::Result<()> { + self.buffer.flush() + } + + /// Write some vectored data into this BufReader with line buffering. This + /// means that, if any newlines are present in the data, the data up to + /// and including the buffer containing the last newline is sent directly + /// to the inner writer, and the data after it is buffered. Returns the + /// number of bytes written. + /// + /// This function operates on a "best effort basis"; in keeping with the + /// convention of `Write::write`, it makes at most one attempt to write + /// new data to the underlying writer. + /// + /// Because this function attempts to send completed lines to the underlying + /// writer, it will also flush the existing buffer if it contains any + /// newlines. + /// + /// Because sorting through an array of `IoSlice` can be a bit convoluted, + /// This method differs from write in the following ways: + /// + /// - It attempts to write the full content of all the buffers up to and + /// including the one containing the last newline. This means that it + /// may attempt to write a partial line, that buffer has data past the + /// newline. + /// - If the write only reports partial success, it does not attempt to + /// find the precise location of the written bytes and buffer the rest. + /// + /// If the underlying vector doesn't support vectored writing, we instead + /// simply write the first non-empty buffer with `write`. This way, we + /// get the benefits of more granular partial-line handling without losing + /// anything in efficiency + fn write_vectored(&mut self, bufs: &[IoSlice<'_>]) -> io::Result { + // If there's no specialized behavior for write_vectored, just use + // write. This has the benefit of more granular partial-line handling. + if !self.is_write_vectored() { + return match bufs.iter().find(|buf| !buf.is_empty()) { + Some(buf) => self.write(buf), + None => Ok(0), + }; + } + + // Find the buffer containing the last newline + let last_newline_buf_idx = bufs + .iter() + .enumerate() + .rev() + .find_map(|(i, buf)| memchr::memchr(b'\n', buf).map(|_| i)); + + // If there are no new newlines (that is, if this write is less than + // one line), just do a regular buffered write + let last_newline_buf_idx = match last_newline_buf_idx { + // No newlines; just do a normal buffered write + None => { + self.flush_if_completed_line()?; + return self.buffer.write_vectored(bufs); + } + Some(i) => i, + }; + + // Flush existing content to prepare for our write + self.buffer.flush_buf()?; + + // This is what we're going to try to write directly to the inner + // writer. The rest will be buffered, if nothing goes wrong. + let (lines, tail) = bufs.split_at(last_newline_buf_idx + 1); + + // Write `lines` directly to the inner writer. In keeping with the + // `write` convention, make at most one attempt to add new (unbuffered) + // data. Because this write doesn't touch the BufWriter state directly, + // and the buffer is known to be empty, we don't need to worry about + // self.panicked here. + let flushed = self.inner_mut().write_vectored(lines)?; + + // If inner returns Ok(0), propagate that to the caller without + // doing additional buffering; otherwise we're just guaranteeing + // an "ErrorKind::WriteZero" later. + if flushed == 0 { + return Ok(0); + } + + // Don't try to reconstruct the exact amount written; just bail + // in the event of a partial write + let lines_len = lines.iter().map(|buf| buf.len()).sum(); + if flushed < lines_len { + return Ok(flushed); + } + + // Now that the write has succeeded, buffer the rest (or as much of the + // rest as possible) + let buffered: usize = tail + .iter() + .filter(|buf| !buf.is_empty()) + .map(|buf| self.buffer.write_to_buf(buf)) + .take_while(|&n| n > 0) + .sum(); + + Ok(flushed + buffered) + } + + fn is_write_vectored(&self) -> bool { + self.inner().is_write_vectored() + } + + /// Write some data into this BufReader with line buffering. This means + /// that, if any newlines are present in the data, the data up to the last + /// newline is sent directly to the underlying writer, and data after it + /// is buffered. + /// + /// Because this function attempts to send completed lines to the underlying + /// writer, it will also flush the existing buffer if it contains any + /// newlines, even if the incoming data does not contain any newlines. + fn write_all(&mut self, buf: &[u8]) -> io::Result<()> { + match memchr::memrchr(b'\n', buf) { + // If there are no new newlines (that is, if this write is less than + // one line), just do a regular buffered write (which may flush if + // we exceed the inner buffer's size) + None => { + self.flush_if_completed_line()?; + self.buffer.write_all(buf) + } + Some(newline_idx) => { + let (lines, tail) = buf.split_at(newline_idx + 1); + + if self.buffered().is_empty() { + self.inner_mut().write_all(lines)?; + } else { + // If there is any buffered data, we add the incoming lines + // to that buffer before flushing, which saves us at least + // one write call. We can't really do this with `write`, + // since we can't do this *and* not suppress errors *and* + // report a consistent state to the caller in a return + // value, but here in write_all it's fine. + self.buffer.write_all(lines)?; + self.buffer.flush_buf()?; + } + + self.buffer.write_all(tail) + } + } + } +} -- cgit v1.2.3