From 698f8c2f01ea549d77d7dc3338a12e04c11057b9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 17 Apr 2024 14:02:58 +0200 Subject: Adding upstream version 1.64.0+dfsg1. Signed-off-by: Daniel Baumann --- vendor/regex-automata/src/regex.rs | 771 +++++++++++++++++++++++++++++++++++++ 1 file changed, 771 insertions(+) create mode 100644 vendor/regex-automata/src/regex.rs (limited to 'vendor/regex-automata/src/regex.rs') diff --git a/vendor/regex-automata/src/regex.rs b/vendor/regex-automata/src/regex.rs new file mode 100644 index 000000000..47e1c5819 --- /dev/null +++ b/vendor/regex-automata/src/regex.rs @@ -0,0 +1,771 @@ +#[cfg(feature = "std")] +use dense::{self, DenseDFA}; +use dfa::DFA; +#[cfg(feature = "std")] +use error::Result; +#[cfg(feature = "std")] +use sparse::SparseDFA; +#[cfg(feature = "std")] +use state_id::StateID; + +/// A regular expression that uses deterministic finite automata for fast +/// searching. +/// +/// A regular expression is comprised of two DFAs, a "forward" DFA and a +/// "reverse" DFA. The forward DFA is responsible for detecting the end of a +/// match while the reverse DFA is responsible for detecting the start of a +/// match. Thus, in order to find the bounds of any given match, a forward +/// search must first be run followed by a reverse search. A match found by +/// the forward DFA guarantees that the reverse DFA will also find a match. +/// +/// The type of the DFA used by a `Regex` corresponds to the `D` type +/// parameter, which must satisfy the [`DFA`](trait.DFA.html) trait. Typically, +/// `D` is either a [`DenseDFA`](enum.DenseDFA.html) or a +/// [`SparseDFA`](enum.SparseDFA.html), where dense DFAs use more memory but +/// search faster, while sparse DFAs use less memory but search more slowly. +/// +/// By default, a regex's DFA type parameter is set to +/// `DenseDFA, usize>`. For most in-memory work loads, this is the +/// most convenient type that gives the best search performance. +/// +/// # Sparse DFAs +/// +/// Since a `Regex` is generic over the `DFA` trait, it can be used with any +/// kind of DFA. While this crate constructs dense DFAs by default, it is easy +/// enough to build corresponding sparse DFAs, and then build a regex from +/// them: +/// +/// ``` +/// use regex_automata::Regex; +/// +/// # fn example() -> Result<(), regex_automata::Error> { +/// // First, build a regex that uses dense DFAs. +/// let dense_re = Regex::new("foo[0-9]+")?; +/// +/// // Second, build sparse DFAs from the forward and reverse dense DFAs. +/// let fwd = dense_re.forward().to_sparse()?; +/// let rev = dense_re.reverse().to_sparse()?; +/// +/// // Third, build a new regex from the constituent sparse DFAs. +/// let sparse_re = Regex::from_dfas(fwd, rev); +/// +/// // A regex that uses sparse DFAs can be used just like with dense DFAs. +/// assert_eq!(true, sparse_re.is_match(b"foo123")); +/// # Ok(()) }; example().unwrap() +/// ``` +#[cfg(feature = "std")] +#[derive(Clone, Debug)] +pub struct Regex, usize>> { + forward: D, + reverse: D, +} + +/// A regular expression that uses deterministic finite automata for fast +/// searching. +/// +/// A regular expression is comprised of two DFAs, a "forward" DFA and a +/// "reverse" DFA. The forward DFA is responsible for detecting the end of a +/// match while the reverse DFA is responsible for detecting the start of a +/// match. Thus, in order to find the bounds of any given match, a forward +/// search must first be run followed by a reverse search. A match found by +/// the forward DFA guarantees that the reverse DFA will also find a match. +/// +/// The type of the DFA used by a `Regex` corresponds to the `D` type +/// parameter, which must satisfy the [`DFA`](trait.DFA.html) trait. Typically, +/// `D` is either a [`DenseDFA`](enum.DenseDFA.html) or a +/// [`SparseDFA`](enum.SparseDFA.html), where dense DFAs use more memory but +/// search faster, while sparse DFAs use less memory but search more slowly. +/// +/// When using this crate without the standard library, the `Regex` type has +/// no default type parameter. +/// +/// # Sparse DFAs +/// +/// Since a `Regex` is generic over the `DFA` trait, it can be used with any +/// kind of DFA. While this crate constructs dense DFAs by default, it is easy +/// enough to build corresponding sparse DFAs, and then build a regex from +/// them: +/// +/// ``` +/// use regex_automata::Regex; +/// +/// # fn example() -> Result<(), regex_automata::Error> { +/// // First, build a regex that uses dense DFAs. +/// let dense_re = Regex::new("foo[0-9]+")?; +/// +/// // Second, build sparse DFAs from the forward and reverse dense DFAs. +/// let fwd = dense_re.forward().to_sparse()?; +/// let rev = dense_re.reverse().to_sparse()?; +/// +/// // Third, build a new regex from the constituent sparse DFAs. +/// let sparse_re = Regex::from_dfas(fwd, rev); +/// +/// // A regex that uses sparse DFAs can be used just like with dense DFAs. +/// assert_eq!(true, sparse_re.is_match(b"foo123")); +/// # Ok(()) }; example().unwrap() +/// ``` +#[cfg(not(feature = "std"))] +#[derive(Clone, Debug)] +pub struct Regex { + forward: D, + reverse: D, +} + +#[cfg(feature = "std")] +impl Regex { + /// Parse the given regular expression using a default configuration and + /// return the corresponding regex. + /// + /// The default configuration uses `usize` for state IDs, premultiplies + /// them and reduces the alphabet size by splitting bytes into equivalence + /// classes. The underlying DFAs are *not* minimized. + /// + /// If you want a non-default configuration, then use the + /// [`RegexBuilder`](struct.RegexBuilder.html) + /// to set your own configuration. + /// + /// # Example + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let re = Regex::new("foo[0-9]+bar")?; + /// assert_eq!(Some((3, 14)), re.find(b"zzzfoo12345barzzz")); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn new(pattern: &str) -> Result { + RegexBuilder::new().build(pattern) + } +} + +#[cfg(feature = "std")] +impl Regex, usize>> { + /// Parse the given regular expression using a default configuration and + /// return the corresponding regex using sparse DFAs. + /// + /// The default configuration uses `usize` for state IDs, reduces the + /// alphabet size by splitting bytes into equivalence classes. The + /// underlying DFAs are *not* minimized. + /// + /// If you want a non-default configuration, then use the + /// [`RegexBuilder`](struct.RegexBuilder.html) + /// to set your own configuration. + /// + /// # Example + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let re = Regex::new_sparse("foo[0-9]+bar")?; + /// assert_eq!(Some((3, 14)), re.find(b"zzzfoo12345barzzz")); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn new_sparse( + pattern: &str, + ) -> Result, usize>>> { + RegexBuilder::new().build_sparse(pattern) + } +} + +impl Regex { + /// Returns true if and only if the given bytes match. + /// + /// This routine may short circuit if it knows that scanning future input + /// will never lead to a different result. In particular, if the underlying + /// DFA enters a match state or a dead state, then this routine will return + /// `true` or `false`, respectively, without inspecting any future input. + /// + /// # Example + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let re = Regex::new("foo[0-9]+bar")?; + /// assert_eq!(true, re.is_match(b"foo12345bar")); + /// assert_eq!(false, re.is_match(b"foobar")); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn is_match(&self, input: &[u8]) -> bool { + self.is_match_at(input, 0) + } + + /// Returns the first position at which a match is found. + /// + /// This routine stops scanning input in precisely the same circumstances + /// as `is_match`. The key difference is that this routine returns the + /// position at which it stopped scanning input if and only if a match + /// was found. If no match is found, then `None` is returned. + /// + /// # Example + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let re = Regex::new("foo[0-9]+")?; + /// assert_eq!(Some(4), re.shortest_match(b"foo12345")); + /// + /// // Normally, the end of the leftmost first match here would be 3, + /// // but the shortest match semantics detect a match earlier. + /// let re = Regex::new("abc|a")?; + /// assert_eq!(Some(1), re.shortest_match(b"abc")); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn shortest_match(&self, input: &[u8]) -> Option { + self.shortest_match_at(input, 0) + } + + /// Returns the start and end offset of the leftmost first match. If no + /// match exists, then `None` is returned. + /// + /// The "leftmost first" match corresponds to the match with the smallest + /// starting offset, but where the end offset is determined by preferring + /// earlier branches in the original regular expression. For example, + /// `Sam|Samwise` will match `Sam` in `Samwise`, but `Samwise|Sam` will + /// match `Samwise` in `Samwise`. + /// + /// Generally speaking, the "leftmost first" match is how most backtracking + /// regular expressions tend to work. This is in contrast to POSIX-style + /// regular expressions that yield "leftmost longest" matches. Namely, + /// both `Sam|Samwise` and `Samwise|Sam` match `Samwise` when using + /// leftmost longest semantics. + /// + /// # Example + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let re = Regex::new("foo[0-9]+")?; + /// assert_eq!(Some((3, 11)), re.find(b"zzzfoo12345zzz")); + /// + /// // Even though a match is found after reading the first byte (`a`), + /// // the leftmost first match semantics demand that we find the earliest + /// // match that prefers earlier parts of the pattern over latter parts. + /// let re = Regex::new("abc|a")?; + /// assert_eq!(Some((0, 3)), re.find(b"abc")); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn find(&self, input: &[u8]) -> Option<(usize, usize)> { + self.find_at(input, 0) + } + + /// Returns the same as `is_match`, but starts the search at the given + /// offset. + /// + /// The significance of the starting point is that it takes the surrounding + /// context into consideration. For example, if the DFA is anchored, then + /// a match can only occur when `start == 0`. + pub fn is_match_at(&self, input: &[u8], start: usize) -> bool { + self.forward().is_match_at(input, start) + } + + /// Returns the same as `shortest_match`, but starts the search at the + /// given offset. + /// + /// The significance of the starting point is that it takes the surrounding + /// context into consideration. For example, if the DFA is anchored, then + /// a match can only occur when `start == 0`. + pub fn shortest_match_at( + &self, + input: &[u8], + start: usize, + ) -> Option { + self.forward().shortest_match_at(input, start) + } + + /// Returns the same as `find`, but starts the search at the given + /// offset. + /// + /// The significance of the starting point is that it takes the surrounding + /// context into consideration. For example, if the DFA is anchored, then + /// a match can only occur when `start == 0`. + pub fn find_at( + &self, + input: &[u8], + start: usize, + ) -> Option<(usize, usize)> { + let end = match self.forward().find_at(input, start) { + None => return None, + Some(end) => end, + }; + let start = self + .reverse() + .rfind(&input[start..end]) + .map(|i| start + i) + .expect("reverse search must match if forward search does"); + Some((start, end)) + } + + /// Returns an iterator over all non-overlapping leftmost first matches + /// in the given bytes. If no match exists, then the iterator yields no + /// elements. + /// + /// Note that if the regex can match the empty string, then it is + /// possible for the iterator to yield a zero-width match at a location + /// that is not a valid UTF-8 boundary (for example, between the code units + /// of a UTF-8 encoded codepoint). This can happen regardless of whether + /// [`allow_invalid_utf8`](struct.RegexBuilder.html#method.allow_invalid_utf8) + /// was enabled or not. + /// + /// # Example + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let re = Regex::new("foo[0-9]+")?; + /// let text = b"foo1 foo12 foo123"; + /// let matches: Vec<(usize, usize)> = re.find_iter(text).collect(); + /// assert_eq!(matches, vec![(0, 4), (5, 10), (11, 17)]); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn find_iter<'r, 't>(&'r self, input: &'t [u8]) -> Matches<'r, 't, D> { + Matches::new(self, input) + } + + /// Build a new regex from its constituent forward and reverse DFAs. + /// + /// This is useful when deserializing a regex from some arbitrary + /// memory region. This is also useful for building regexes from other + /// types of DFAs. + /// + /// # Example + /// + /// This example is a bit a contrived. The usual use of these methods + /// would involve serializing `initial_re` somewhere and then deserializing + /// it later to build a regex. + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let initial_re = Regex::new("foo[0-9]+")?; + /// assert_eq!(true, initial_re.is_match(b"foo123")); + /// + /// let (fwd, rev) = (initial_re.forward(), initial_re.reverse()); + /// let re = Regex::from_dfas(fwd, rev); + /// assert_eq!(true, re.is_match(b"foo123")); + /// # Ok(()) }; example().unwrap() + /// ``` + /// + /// This example shows how you might build smaller DFAs, and then use those + /// smaller DFAs to build a new regex. + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let initial_re = Regex::new("foo[0-9]+")?; + /// assert_eq!(true, initial_re.is_match(b"foo123")); + /// + /// let fwd = initial_re.forward().to_u16()?; + /// let rev = initial_re.reverse().to_u16()?; + /// let re = Regex::from_dfas(fwd, rev); + /// assert_eq!(true, re.is_match(b"foo123")); + /// # Ok(()) }; example().unwrap() + /// ``` + /// + /// This example shows how to build a `Regex` that uses sparse DFAs instead + /// of dense DFAs: + /// + /// ``` + /// use regex_automata::Regex; + /// + /// # fn example() -> Result<(), regex_automata::Error> { + /// let initial_re = Regex::new("foo[0-9]+")?; + /// assert_eq!(true, initial_re.is_match(b"foo123")); + /// + /// let fwd = initial_re.forward().to_sparse()?; + /// let rev = initial_re.reverse().to_sparse()?; + /// let re = Regex::from_dfas(fwd, rev); + /// assert_eq!(true, re.is_match(b"foo123")); + /// # Ok(()) }; example().unwrap() + /// ``` + pub fn from_dfas(forward: D, reverse: D) -> Regex { + Regex { forward, reverse } + } + + /// Return the underlying DFA responsible for forward matching. + pub fn forward(&self) -> &D { + &self.forward + } + + /// Return the underlying DFA responsible for reverse matching. + pub fn reverse(&self) -> &D { + &self.reverse + } +} + +/// An iterator over all non-overlapping matches for a particular search. +/// +/// The iterator yields a `(usize, usize)` value until no more matches could be +/// found. The first `usize` is the start of the match (inclusive) while the +/// second `usize` is the end of the match (exclusive). +/// +/// `S` is the type used to represent state identifiers in the underlying +/// regex. The lifetime variables are as follows: +/// +/// * `'r` is the lifetime of the regular expression value itself. +/// * `'t` is the lifetime of the text being searched. +#[derive(Clone, Debug)] +pub struct Matches<'r, 't, D: DFA + 'r> { + re: &'r Regex, + text: &'t [u8], + last_end: usize, + last_match: Option, +} + +impl<'r, 't, D: DFA> Matches<'r, 't, D> { + fn new(re: &'r Regex, text: &'t [u8]) -> Matches<'r, 't, D> { + Matches { re, text, last_end: 0, last_match: None } + } +} + +impl<'r, 't, D: DFA> Iterator for Matches<'r, 't, D> { + type Item = (usize, usize); + + fn next(&mut self) -> Option<(usize, usize)> { + if self.last_end > self.text.len() { + return None; + } + let (s, e) = match self.re.find_at(self.text, self.last_end) { + None => return None, + Some((s, e)) => (s, e), + }; + if s == e { + // This is an empty match. To ensure we make progress, start + // the next search at the smallest possible starting position + // of the next match following this one. + self.last_end = e + 1; + // Don't accept empty matches immediately following a match. + // Just move on to the next match. + if Some(e) == self.last_match { + return self.next(); + } + } else { + self.last_end = e; + } + self.last_match = Some(e); + Some((s, e)) + } +} + +/// A builder for a regex based on deterministic finite automatons. +/// +/// This builder permits configuring several aspects of the construction +/// process such as case insensitivity, Unicode support and various options +/// that impact the size of the underlying DFAs. In some cases, options (like +/// performing DFA minimization) can come with a substantial additional cost. +/// +/// This builder generally constructs two DFAs, where one is responsible for +/// finding the end of a match and the other is responsible for finding the +/// start of a match. If you only need to detect whether something matched, +/// or only the end of a match, then you should use a +/// [`dense::Builder`](dense/struct.Builder.html) +/// to construct a single DFA, which is cheaper than building two DFAs. +#[cfg(feature = "std")] +#[derive(Clone, Debug)] +pub struct RegexBuilder { + dfa: dense::Builder, +} + +#[cfg(feature = "std")] +impl RegexBuilder { + /// Create a new regex builder with the default configuration. + pub fn new() -> RegexBuilder { + RegexBuilder { dfa: dense::Builder::new() } + } + + /// Build a regex from the given pattern. + /// + /// If there was a problem parsing or compiling the pattern, then an error + /// is returned. + pub fn build(&self, pattern: &str) -> Result { + self.build_with_size::(pattern) + } + + /// Build a regex from the given pattern using sparse DFAs. + /// + /// If there was a problem parsing or compiling the pattern, then an error + /// is returned. + pub fn build_sparse( + &self, + pattern: &str, + ) -> Result, usize>>> { + self.build_with_size_sparse::(pattern) + } + + /// Build a regex from the given pattern using a specific representation + /// for the underlying DFA state IDs. + /// + /// If there was a problem parsing or compiling the pattern, then an error + /// is returned. + /// + /// The representation of state IDs is determined by the `S` type + /// parameter. In general, `S` is usually one of `u8`, `u16`, `u32`, `u64` + /// or `usize`, where `usize` is the default used for `build`. The purpose + /// of specifying a representation for state IDs is to reduce the memory + /// footprint of the underlying DFAs. + /// + /// When using this routine, the chosen state ID representation will be + /// used throughout determinization and minimization, if minimization was + /// requested. Even if the minimized DFAs can fit into the chosen state ID + /// representation but the initial determinized DFA cannot, then this will + /// still return an error. To get a minimized DFA with a smaller state ID + /// representation, first build it with a bigger state ID representation, + /// and then shrink the sizes of the DFAs using one of its conversion + /// routines, such as [`DenseDFA::to_u16`](enum.DenseDFA.html#method.to_u16). + /// Finally, reconstitute the regex via + /// [`Regex::from_dfa`](struct.Regex.html#method.from_dfa). + pub fn build_with_size( + &self, + pattern: &str, + ) -> Result, S>>> { + let forward = self.dfa.build_with_size(pattern)?; + let reverse = self + .dfa + .clone() + .anchored(true) + .reverse(true) + .longest_match(true) + .build_with_size(pattern)?; + Ok(Regex::from_dfas(forward, reverse)) + } + + /// Build a regex from the given pattern using a specific representation + /// for the underlying DFA state IDs using sparse DFAs. + pub fn build_with_size_sparse( + &self, + pattern: &str, + ) -> Result, S>>> { + let re = self.build_with_size(pattern)?; + let fwd = re.forward().to_sparse()?; + let rev = re.reverse().to_sparse()?; + Ok(Regex::from_dfas(fwd, rev)) + } + + /// Set whether matching must be anchored at the beginning of the input. + /// + /// When enabled, a match must begin at the start of the input. When + /// disabled, the regex will act as if the pattern started with a `.*?`, + /// which enables a match to appear anywhere. + /// + /// By default this is disabled. + pub fn anchored(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.anchored(yes); + self + } + + /// Enable or disable the case insensitive flag by default. + /// + /// By default this is disabled. It may alternatively be selectively + /// enabled in the regular expression itself via the `i` flag. + pub fn case_insensitive(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.case_insensitive(yes); + self + } + + /// Enable verbose mode in the regular expression. + /// + /// When enabled, verbose mode permits insigificant whitespace in many + /// places in the regular expression, as well as comments. Comments are + /// started using `#` and continue until the end of the line. + /// + /// By default, this is disabled. It may be selectively enabled in the + /// regular expression by using the `x` flag regardless of this setting. + pub fn ignore_whitespace(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.ignore_whitespace(yes); + self + } + + /// Enable or disable the "dot matches any character" flag by default. + /// + /// By default this is disabled. It may alternatively be selectively + /// enabled in the regular expression itself via the `s` flag. + pub fn dot_matches_new_line(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.dot_matches_new_line(yes); + self + } + + /// Enable or disable the "swap greed" flag by default. + /// + /// By default this is disabled. It may alternatively be selectively + /// enabled in the regular expression itself via the `U` flag. + pub fn swap_greed(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.swap_greed(yes); + self + } + + /// Enable or disable the Unicode flag (`u`) by default. + /// + /// By default this is **enabled**. It may alternatively be selectively + /// disabled in the regular expression itself via the `u` flag. + /// + /// Note that unless `allow_invalid_utf8` is enabled (it's disabled by + /// default), a regular expression will fail to parse if Unicode mode is + /// disabled and a sub-expression could possibly match invalid UTF-8. + pub fn unicode(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.unicode(yes); + self + } + + /// When enabled, the builder will permit the construction of a regular + /// expression that may match invalid UTF-8. + /// + /// When disabled (the default), the builder is guaranteed to produce a + /// regex that will only ever match valid UTF-8 (otherwise, the builder + /// will return an error). + pub fn allow_invalid_utf8(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.allow_invalid_utf8(yes); + self + } + + /// Set the nesting limit used for the regular expression parser. + /// + /// The nesting limit controls how deep the abstract syntax tree is allowed + /// to be. If the AST exceeds the given limit (e.g., with too many nested + /// groups), then an error is returned by the parser. + /// + /// The purpose of this limit is to act as a heuristic to prevent stack + /// overflow when building a finite automaton from a regular expression's + /// abstract syntax tree. In particular, construction currently uses + /// recursion. In the future, the implementation may stop using recursion + /// and this option will no longer be necessary. + /// + /// This limit is not checked until the entire AST is parsed. Therefore, + /// if callers want to put a limit on the amount of heap space used, then + /// they should impose a limit on the length, in bytes, of the concrete + /// pattern string. In particular, this is viable since the parser will + /// limit itself to heap space proportional to the lenth of the pattern + /// string. + /// + /// Note that a nest limit of `0` will return a nest limit error for most + /// patterns but not all. For example, a nest limit of `0` permits `a` but + /// not `ab`, since `ab` requires a concatenation AST item, which results + /// in a nest depth of `1`. In general, a nest limit is not something that + /// manifests in an obvious way in the concrete syntax, therefore, it + /// should not be used in a granular way. + pub fn nest_limit(&mut self, limit: u32) -> &mut RegexBuilder { + self.dfa.nest_limit(limit); + self + } + + /// Minimize the underlying DFAs. + /// + /// When enabled, the DFAs powering the resulting regex will be minimized + /// such that it is as small as possible. + /// + /// Whether one enables minimization or not depends on the types of costs + /// you're willing to pay and how much you care about its benefits. In + /// particular, minimization has worst case `O(n*k*logn)` time and `O(k*n)` + /// space, where `n` is the number of DFA states and `k` is the alphabet + /// size. In practice, minimization can be quite costly in terms of both + /// space and time, so it should only be done if you're willing to wait + /// longer to produce a DFA. In general, you might want a minimal DFA in + /// the following circumstances: + /// + /// 1. You would like to optimize for the size of the automaton. This can + /// manifest in one of two ways. Firstly, if you're converting the + /// DFA into Rust code (or a table embedded in the code), then a minimal + /// DFA will translate into a corresponding reduction in code size, and + /// thus, also the final compiled binary size. Secondly, if you are + /// building many DFAs and putting them on the heap, you'll be able to + /// fit more if they are smaller. Note though that building a minimal + /// DFA itself requires additional space; you only realize the space + /// savings once the minimal DFA is constructed (at which point, the + /// space used for minimization is freed). + /// 2. You've observed that a smaller DFA results in faster match + /// performance. Naively, this isn't guaranteed since there is no + /// inherent difference between matching with a bigger-than-minimal + /// DFA and a minimal DFA. However, a smaller DFA may make use of your + /// CPU's cache more efficiently. + /// 3. You are trying to establish an equivalence between regular + /// languages. The standard method for this is to build a minimal DFA + /// for each language and then compare them. If the DFAs are equivalent + /// (up to state renaming), then the languages are equivalent. + /// + /// This option is disabled by default. + pub fn minimize(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.minimize(yes); + self + } + + /// Premultiply state identifiers in the underlying DFA transition tables. + /// + /// When enabled, state identifiers are premultiplied to point to their + /// corresponding row in the DFA's transition table. That is, given the + /// `i`th state, its corresponding premultiplied identifier is `i * k` + /// where `k` is the alphabet size of the DFA. (The alphabet size is at + /// most 256, but is in practice smaller if byte classes is enabled.) + /// + /// When state identifiers are not premultiplied, then the identifier of + /// the `i`th state is `i`. + /// + /// The advantage of premultiplying state identifiers is that is saves + /// a multiplication instruction per byte when searching with the DFA. + /// This has been observed to lead to a 20% performance benefit in + /// micro-benchmarks. + /// + /// The primary disadvantage of premultiplying state identifiers is + /// that they require a larger integer size to represent. For example, + /// if your DFA has 200 states, then its premultiplied form requires + /// 16 bits to represent every possible state identifier, where as its + /// non-premultiplied form only requires 8 bits. + /// + /// This option is enabled by default. + pub fn premultiply(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.premultiply(yes); + self + } + + /// Shrink the size of the underlying DFA alphabet by mapping bytes to + /// their equivalence classes. + /// + /// When enabled, each DFA will use a map from all possible bytes to their + /// corresponding equivalence class. Each equivalence class represents a + /// set of bytes that does not discriminate between a match and a non-match + /// in the DFA. For example, the pattern `[ab]+` has at least two + /// equivalence classes: a set containing `a` and `b` and a set containing + /// every byte except for `a` and `b`. `a` and `b` are in the same + /// equivalence classes because they never discriminate between a match + /// and a non-match. + /// + /// The advantage of this map is that the size of the transition table can + /// be reduced drastically from `#states * 256 * sizeof(id)` to + /// `#states * k * sizeof(id)` where `k` is the number of equivalence + /// classes. As a result, total space usage can decrease substantially. + /// Moreover, since a smaller alphabet is used, compilation becomes faster + /// as well. + /// + /// The disadvantage of this map is that every byte searched must be + /// passed through this map before it can be used to determine the next + /// transition. This has a small match time performance cost. + /// + /// This option is enabled by default. + pub fn byte_classes(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.byte_classes(yes); + self + } + + /// Apply best effort heuristics to shrink the NFA at the expense of more + /// time/memory. + /// + /// This may be exposed in the future, but for now is exported for use in + /// the `regex-automata-debug` tool. + #[doc(hidden)] + pub fn shrink(&mut self, yes: bool) -> &mut RegexBuilder { + self.dfa.shrink(yes); + self + } +} + +#[cfg(feature = "std")] +impl Default for RegexBuilder { + fn default() -> RegexBuilder { + RegexBuilder::new() + } +} -- cgit v1.2.3