From 698f8c2f01ea549d77d7dc3338a12e04c11057b9 Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 17 Apr 2024 14:02:58 +0200 Subject: Adding upstream version 1.64.0+dfsg1. Signed-off-by: Daniel Baumann --- vendor/snap/.cargo-checksum.json | 1 + vendor/snap/COPYING | 27 ++ vendor/snap/Cargo.lock | 14 + vendor/snap/Cargo.toml | 35 ++ vendor/snap/README.md | 229 +++++++++++++ vendor/snap/build.rs | 124 +++++++ vendor/snap/examples/compress-escaped.rs | 39 +++ vendor/snap/examples/compress.rs | 13 + vendor/snap/examples/decompress.rs | 13 + vendor/snap/rustfmt.toml | 2 + vendor/snap/src/bytes.rs | 118 +++++++ vendor/snap/src/compress.rs | 539 +++++++++++++++++++++++++++++++ vendor/snap/src/crc32.rs | 111 +++++++ vendor/snap/src/crc32_table.rs | 2 + vendor/snap/src/decompress.rs | 470 +++++++++++++++++++++++++++ vendor/snap/src/error.rs | 333 +++++++++++++++++++ vendor/snap/src/frame.rs | 104 ++++++ vendor/snap/src/lib.rs | 109 +++++++ vendor/snap/src/raw.rs | 14 + vendor/snap/src/read.rs | 450 ++++++++++++++++++++++++++ vendor/snap/src/tag.rs | 2 + vendor/snap/src/varint.rs | 31 ++ vendor/snap/src/write.rs | 215 ++++++++++++ 23 files changed, 2995 insertions(+) create mode 100644 vendor/snap/.cargo-checksum.json create mode 100644 vendor/snap/COPYING create mode 100644 vendor/snap/Cargo.lock create mode 100644 vendor/snap/Cargo.toml create mode 100644 vendor/snap/README.md create mode 100644 vendor/snap/build.rs create mode 100644 vendor/snap/examples/compress-escaped.rs create mode 100644 vendor/snap/examples/compress.rs create mode 100644 vendor/snap/examples/decompress.rs create mode 100644 vendor/snap/rustfmt.toml create mode 100644 vendor/snap/src/bytes.rs create mode 100644 vendor/snap/src/compress.rs create mode 100644 vendor/snap/src/crc32.rs create mode 100644 vendor/snap/src/crc32_table.rs create mode 100644 vendor/snap/src/decompress.rs create mode 100644 vendor/snap/src/error.rs create mode 100644 vendor/snap/src/frame.rs create mode 100644 vendor/snap/src/lib.rs create mode 100644 vendor/snap/src/raw.rs create mode 100644 vendor/snap/src/read.rs create mode 100644 vendor/snap/src/tag.rs create mode 100644 vendor/snap/src/varint.rs create mode 100644 vendor/snap/src/write.rs (limited to 'vendor/snap') diff --git a/vendor/snap/.cargo-checksum.json b/vendor/snap/.cargo-checksum.json new file mode 100644 index 000000000..6fc40889e --- /dev/null +++ b/vendor/snap/.cargo-checksum.json @@ -0,0 +1 @@ +{"files":{"COPYING":"7ca1297d23644e30bd489193a82a33f324e5fe33f25df4195649b91b883df967","Cargo.lock":"5e2cad11e762a0ae36613c821b6ff8a8eb27001a676eed4a2a0d2f60ef276858","Cargo.toml":"82e6f46a064cad4d4fd5e0d9efcd6ccfa6500809d6b2654538866974e11de79c","README.md":"7519de7d11a582319372ec90bc12c41ed1bc4348a3d8ed10a07fc940c9810549","build.rs":"afae7dd3c45a9a46bcce096e9e0aa9e36ade171e8fd00309969478025b82cac1","examples/compress-escaped.rs":"cef1933dbc5d9b496587c4c1a596f26e326e73799ab9a0ede1c3d76b00676090","examples/compress.rs":"34bad60450e768ed4ac27edf8622abc4d918b17e57b8c286030203e2b3590c24","examples/decompress.rs":"87aa11875ec98f253c8b48ce3a202ac3412063ce2f64387074194151c11fff5e","rustfmt.toml":"1ca600239a27401c4a43f363cf3f38183a212affc1f31bff3ae93234bbaec228","src/bytes.rs":"2eb9783acdf949ef96a9031d2bd43ead65db50a41a60ad98dc117cd61655c7c4","src/compress.rs":"e6f3160be400c2a4869d71210a2558ba8b438b835b632a12b7ff487660db093f","src/crc32.rs":"9f3858bef802640c595705c496f462d0343c4adcff9bdf333a43306fb67db7ae","src/crc32_table.rs":"e999470ca10bb7914887747be838d05d0f5059ae99a8b8c57b0be7de3931e72a","src/decompress.rs":"05c4d0c0922b1ad084cf32f224722f2fe9d63128d6a4da0c44333742d681b80f","src/error.rs":"ba50d0652e50198d6ab42d23788f726d083ba69d8b2459a10a00cc83755dbbd0","src/frame.rs":"4f69a9526a5dd0367631fc7a764bea877f7f0b4c33ee30d4ece62913c42ea48d","src/lib.rs":"1f4dc31068bc60a327ecd632993eaa40feb0b2198affdb1a00a7a9538b23b527","src/raw.rs":"a7048da3a4b76b75e4b3d071ee9959dbf12c5b3a36dabb2f7878513507c80cb9","src/read.rs":"7528c6487d90c4f6170982e5393f56b3a01443b14abac3d4f41d94b7f3beb3f1","src/tag.rs":"9ac94977c5ab3ea687b9441ea3c615f64a23eac11a4bade19cfa3be5968cb718","src/varint.rs":"6d63fca6323c91f193628a41b6e75f5b3443777467e6a5665907bbbba549e6c7","src/write.rs":"086edd9fb1442b6bc8bf8c6a80023eccc4ca627de57ccc62279691c9ff7f0786"},"package":"45456094d1983e2ee2a18fdfebce3189fa451699d0502cb8e3b49dba5ba41451"} \ No newline at end of file diff --git a/vendor/snap/COPYING b/vendor/snap/COPYING new file mode 100644 index 000000000..a42659dcc --- /dev/null +++ b/vendor/snap/COPYING @@ -0,0 +1,27 @@ +Copyright 2011, The Snappy-Rust Authors. All rights reserved. + +Redistribution and use in source and binary forms, with or without +modification, are permitted provided that the following conditions are +met: + + * Redistributions of source code must retain the above copyright +notice, this list of conditions and the following disclaimer. + * Redistributions in binary form must reproduce the above +copyright notice, this list of conditions and the following disclaimer +in the documentation and/or other materials provided with the +distribution. + * Neither the name of the copyright holder nor the names of its +contributors may be used to endorse or promote products derived from +this software without specific prior written permission. + +THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +"AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. diff --git a/vendor/snap/Cargo.lock b/vendor/snap/Cargo.lock new file mode 100644 index 000000000..8ddce9d43 --- /dev/null +++ b/vendor/snap/Cargo.lock @@ -0,0 +1,14 @@ +# This file is automatically @generated by Cargo. +# It is not intended for manual editing. +[[package]] +name = "doc-comment" +version = "0.3.1" +source = "registry+https://github.com/rust-lang/crates.io-index" +checksum = "923dea538cea0aa3025e8685b20d6ee21ef99c4f77e954a30febbaac5ec73a97" + +[[package]] +name = "snap" +version = "1.0.5" +dependencies = [ + "doc-comment", +] diff --git a/vendor/snap/Cargo.toml b/vendor/snap/Cargo.toml new file mode 100644 index 000000000..8559a1e4b --- /dev/null +++ b/vendor/snap/Cargo.toml @@ -0,0 +1,35 @@ +# THIS FILE IS AUTOMATICALLY GENERATED BY CARGO +# +# When uploading crates to the registry Cargo will automatically +# "normalize" Cargo.toml files for maximal compatibility +# with all versions of Cargo and also rewrite `path` dependencies +# to registry (e.g., crates.io) dependencies +# +# If you believe there's an error in this file please file an +# issue against the rust-lang/cargo repository. If you're +# editing this file be aware that the upstream Cargo.toml +# will likely look very different (and much more reasonable) + +[package] +edition = "2018" +name = "snap" +version = "1.0.5" +authors = ["Andrew Gallant "] +exclude = ["data/*"] +description = "A pure Rust implementation of the Snappy compression algorithm. Includes\nstreaming compression and decompression.\n" +homepage = "https://github.com/BurntSushi/rust-snappy" +documentation = "https://docs.rs/snap" +readme = "README.md" +keywords = ["snappy", "compress", "compression", "decompress", "decompression"] +license = "BSD-3-Clause" +repository = "https://github.com/BurntSushi/rust-snappy" +[profile.release] +debug = true + +[profile.test] +opt-level = 3 + +[lib] +bench = false +[dev-dependencies.doc-comment] +version = "0.3.1" diff --git a/vendor/snap/README.md b/vendor/snap/README.md new file mode 100644 index 000000000..c87a400ba --- /dev/null +++ b/vendor/snap/README.md @@ -0,0 +1,229 @@ +snap +==== +A pure Rust implementation of the +[Snappy compression algorithm](https://google.github.io/snappy/). +Includes streaming compression and decompression using the Snappy frame format. +This implementation is ported from both the +[reference C++ implementation](https://github.com/google/snappy) +and the +[Go implementation](https://github.com/golang/snappy). + +[![Build status](https://github.com/BurntSushi/rust-snappy/workflows/ci/badge.svg)](https://github.com/BurntSushi/rust-snappy/actions) +[![](https://meritbadge.herokuapp.com/snap)](https://crates.io/crates/snap) + +Licensed under the BSD 3-Clause. + + +### Documentation + +https://docs.rs/snap + + +### Usage + +Add this to your `Cargo.toml`: + +```toml +[dependencies] +snap = "1" +``` + + +### Example: compress data on `stdin` + +This program reads data from `stdin`, compresses it and emits it to `stdout`. +This example can be found in `examples/compress.rs`: + +```rust +use std::io; + +fn main() { + let stdin = io::stdin(); + let stdout = io::stdout(); + + let mut rdr = stdin.lock(); + // Wrap the stdout writer in a Snappy writer. + let mut wtr = snap::write::FrameEncoder::new(stdout.lock()); + io::copy(&mut rdr, &mut wtr).expect("I/O operation failed"); +} +``` + + +### Example: decompress data on `stdin` + +This program reads data from `stdin`, decompresses it and emits it to `stdout`. +This example can be found in `examples/decompress.rs`: + +```rust +use std::io; + +fn main() { + let stdin = io::stdin(); + let stdout = io::stdout(); + + // Wrap the stdin reader in a Snappy reader. + let mut rdr = snap::read::FrameDecoder::new(stdin.lock()); + let mut wtr = stdout.lock(); + io::copy(&mut rdr, &mut wtr).expect("I/O operation failed"); +} +``` + + +### Example: the szip tool + +`szip` is a tool with similar behavior as `gzip`, except it uses Snappy +compression. It can be installed with Cargo: + +``` +$ cargo install szip +``` + +To compress a file, run `szip file`. To decompress a file, run +`szip -d file.sz`. See `szip --help` for more details. + + +### Testing + +This crate is tested against the reference C++ implementation of Snappy. +Currently, compression is byte-for-byte equivalent with the C++ implementation. +This seems like a reasonable starting point, although it is not necessarily +a goal to always maintain byte-for-byte equivalence. + +Tests against the reference C++ implementation can be run with +`cargo test --features cpp`. Note that you will need to have the C++ Snappy +library in your `LD_LIBRARY_PATH` (or equivalent). + +To run tests, you'll need to explicitly run the `test` crate: + +``` +$ cargo test --manifest-path test/Cargo.toml +``` + +To test that this library matches the output of the reference C++ library, use: + +``` +$ cargo test --manifest-path test/Cargo.toml --features cpp +``` + +Tests are in a separate crate because of the dependency on the C++ reference +library. Namely, Cargo does not yet permit optional dev dependencies. + + +### Minimum Rust version policy + +This crate's minimum supported `rustc` version is `1.39.0`. + +The current policy is that the minimum Rust version required to use this crate +can be increased in minor version updates. For example, if `crate 1.0` requires +Rust 1.20.0, then `crate 1.0.z` for all values of `z` will also require Rust +1.20.0 or newer. However, `crate 1.y` for `y > 0` may require a newer minimum +version of Rust. + +In general, this crate will be conservative with respect to the minimum +supported version of Rust. + + +### Performance + +The performance of this implementation should roughly match the performance of +the C++ implementation on x86_64. Below are the results of the microbenchmarks +(as defined in the C++ library): + +``` +group snappy/cpp/ snappy/snap/ +----- ----------- ------------ +compress/zflat00_html 1.00 94.5±0.62µs 1033.1 MB/sec 1.02 96.1±0.74µs 1016.2 MB/sec +compress/zflat01_urls 1.00 1182.3±8.89µs 566.3 MB/sec 1.04 1235.3±11.99µs 542.0 MB/sec +compress/zflat02_jpg 1.00 7.2±0.11µs 15.9 GB/sec 1.01 7.3±0.06µs 15.8 GB/sec +compress/zflat03_jpg_200 1.10 262.4±1.84ns 727.0 MB/sec 1.00 237.5±2.95ns 803.2 MB/sec +compress/zflat04_pdf 1.02 10.3±0.18µs 9.2 GB/sec 1.00 10.1±0.16µs 9.4 GB/sec +compress/zflat05_html4 1.00 399.2±5.36µs 978.4 MB/sec 1.01 404.0±2.46µs 966.8 MB/sec +compress/zflat06_txt1 1.00 397.3±2.61µs 365.1 MB/sec 1.00 398.5±3.06µs 364.0 MB/sec +compress/zflat07_txt2 1.00 352.8±3.20µs 338.4 MB/sec 1.01 355.2±5.01µs 336.1 MB/sec +compress/zflat08_txt3 1.01 1058.8±6.85µs 384.4 MB/sec 1.00 1051.8±6.74µs 386.9 MB/sec +compress/zflat09_txt4 1.00 1444.1±8.10µs 318.2 MB/sec 1.00 1450.0±13.36µs 316.9 MB/sec +compress/zflat10_pb 1.00 85.1±0.58µs 1328.6 MB/sec 1.02 87.0±0.90µs 1300.2 MB/sec +compress/zflat11_gaviota 1.07 311.9±4.27µs 563.5 MB/sec 1.00 291.9±1.86µs 602.3 MB/sec +decompress/uflat00_html 1.03 36.9±0.28µs 2.6 GB/sec 1.00 36.0±0.25µs 2.7 GB/sec +decompress/uflat01_urls 1.04 437.4±2.89µs 1530.7 MB/sec 1.00 419.9±3.10µs 1594.6 MB/sec +decompress/uflat02_jpg 1.00 4.6±0.05µs 24.9 GB/sec 1.00 4.6±0.03µs 25.0 GB/sec +decompress/uflat03_jpg_200 1.08 122.4±1.06ns 1558.6 MB/sec 1.00 112.8±1.35ns 1690.8 MB/sec +decompress/uflat04_pdf 1.00 5.7±0.05µs 16.8 GB/sec 1.10 6.2±0.07µs 15.3 GB/sec +decompress/uflat05_html4 1.01 164.1±1.71µs 2.3 GB/sec 1.00 162.6±2.16µs 2.3 GB/sec +decompress/uflat06_txt1 1.08 146.6±1.01µs 989.5 MB/sec 1.00 135.3±1.11µs 1072.0 MB/sec +decompress/uflat07_txt2 1.09 130.2±0.93µs 916.6 MB/sec 1.00 119.2±0.96µs 1001.8 MB/sec +decompress/uflat08_txt3 1.07 387.2±2.30µs 1051.0 MB/sec 1.00 361.9±6.29µs 1124.7 MB/sec +decompress/uflat09_txt4 1.09 536.1±3.47µs 857.2 MB/sec 1.00 494.0±5.05µs 930.2 MB/sec +decompress/uflat10_pb 1.00 32.5±0.19µs 3.4 GB/sec 1.05 34.0±0.48µs 3.2 GB/sec +decompress/uflat11_gaviota 1.00 142.1±2.05µs 1236.7 MB/sec 1.00 141.5±0.92µs 1242.3 MB/sec +``` + +Notes: These benchmarks were run with Snappy/C++ 1.1.8. Both the C++ and Rust +benchmarks were run with the same benchmark harness. Benchmarks were run on an +Intel i7-6900K. + +Additionally, here are the benchmarks run on the same machine from the Go +implementation of Snappy (which has a hand rolled implementation in Assembly). +Note that these were run using Go's microbenchmark tool, so the numbers may not +be directly comparable, but they should serve as a useful signpost: + +``` +Benchmark_UFlat0 25040 45180 ns/op 2266.49 MB/s +Benchmark_UFlat1 2648 451475 ns/op 1555.10 MB/s +Benchmark_UFlat2 229965 4788 ns/op 25709.01 MB/s +Benchmark_UFlat3 11355555 101 ns/op 1973.65 MB/s +Benchmark_UFlat4 196551 6055 ns/op 16912.64 MB/s +Benchmark_UFlat5 6016 189219 ns/op 2164.68 MB/s +Benchmark_UFlat6 6914 166371 ns/op 914.16 MB/s +Benchmark_UFlat7 8173 142506 ns/op 878.41 MB/s +Benchmark_UFlat8 2744 436424 ns/op 977.84 MB/s +Benchmark_UFlat9 1999 591141 ns/op 815.14 MB/s +Benchmark_UFlat10 28885 37291 ns/op 3180.04 MB/s +Benchmark_UFlat11 7308 163366 ns/op 1128.26 MB/s +Benchmark_ZFlat0 12902 91231 ns/op 1122.43 MB/s +Benchmark_ZFlat1 997 1200579 ns/op 584.79 MB/s +Benchmark_ZFlat2 136762 7832 ns/op 15716.53 MB/s +Benchmark_ZFlat3 4896124 245 ns/op 817.27 MB/s +Benchmark_ZFlat4 117643 10129 ns/op 10109.44 MB/s +Benchmark_ZFlat5 2934 394742 ns/op 1037.64 MB/s +Benchmark_ZFlat6 3008 382877 ns/op 397.23 MB/s +Benchmark_ZFlat7 3411 344916 ns/op 362.93 MB/s +Benchmark_ZFlat8 966 1057985 ns/op 403.36 MB/s +Benchmark_ZFlat9 854 1429024 ns/op 337.20 MB/s +Benchmark_ZFlat10 13861 83040 ns/op 1428.08 MB/s +Benchmark_ZFlat11 4070 293952 ns/op 627.04 MB/s +``` + +To run benchmarks, including the reference C++ implementation, do the +following: + +``` +$ cd bench +$ cargo bench --features cpp -- --save-baseline snappy +``` + +To compare them, as shown above, install +[`critcmp`](https://github.com/BurntSushi/critcmp) +and run (assuming you saved the baseline above under the name `snappy`): + +``` +$ critcmp snappy -g '.*?/(.*$)' +``` + +Finally, the Go benchmarks were run with the following command on commit +`ff6b7dc8`: + +``` +$ go test -cpu 1 -bench Flat -download +``` + + +### Comparison with other Snappy crates + +* `snappy` - These are bindings to the C++ library. No support for the Snappy + frame format. +* `snappy_framed` - Implements the Snappy frame format on top of the `snappy` + crate. +* `rsnappy` - Written in pure Rust, but lacks documentation and the Snappy + frame format. Performance is unclear and tests appear incomplete. +* `snzip` - Was created and immediately yanked from crates.io. diff --git a/vendor/snap/build.rs b/vendor/snap/build.rs new file mode 100644 index 000000000..283164f2e --- /dev/null +++ b/vendor/snap/build.rs @@ -0,0 +1,124 @@ +use std::env; +use std::fs::File; +use std::io::{self, Write}; +use std::path::{Path, PathBuf}; + +const CASTAGNOLI_POLY: u32 = 0x82f63b78; + +type Result = std::result::Result>; + +fn main() { + if let Err(err) = try_main() { + panic!("{}", err); + } +} + +fn try_main() -> Result<()> { + let out_dir = match env::var_os("OUT_DIR") { + None => { + return Err(From::from("OUT_DIR environment variable not defined")) + } + Some(out_dir) => PathBuf::from(out_dir), + }; + write_tag_lookup_table(&out_dir)?; + write_crc_tables(&out_dir)?; + Ok(()) +} + +fn write_tag_lookup_table(out_dir: &Path) -> Result<()> { + let out_path = out_dir.join("tag.rs"); + let mut out = io::BufWriter::new(File::create(out_path)?); + + writeln!(out, "pub const TAG_LOOKUP_TABLE: [u16; 256] = [")?; + for b in 0u8..=255 { + writeln!(out, " {},", tag_entry(b))?; + } + writeln!(out, "];")?; + Ok(()) +} + +fn tag_entry(b: u8) -> u16 { + let b = b as u16; + match b & 0b00000011 { + 0b00 => { + let lit_len = (b >> 2) + 1; + if lit_len <= 60 { + lit_len + } else { + assert!(lit_len <= 64); + (lit_len - 60) << 11 + } + } + 0b01 => { + let len = 4 + ((b >> 2) & 0b111); + let offset = (b >> 5) & 0b111; + (1 << 11) | (offset << 8) | len + } + 0b10 => { + let len = 1 + (b >> 2); + (2 << 11) | len + } + 0b11 => { + let len = 1 + (b >> 2); + (4 << 11) | len + } + _ => unreachable!(), + } +} + +fn write_crc_tables(out_dir: &Path) -> Result<()> { + let out_path = out_dir.join("crc32_table.rs"); + let mut out = io::BufWriter::new(File::create(out_path)?); + + let table = make_table(CASTAGNOLI_POLY); + let table16 = make_table16(CASTAGNOLI_POLY); + + writeln!(out, "pub const TABLE: [u32; 256] = [")?; + for &x in table.iter() { + writeln!(out, " {},", x)?; + } + writeln!(out, "];\n")?; + + writeln!(out, "pub const TABLE16: [[u32; 256]; 16] = [")?; + for table in table16.iter() { + writeln!(out, " [")?; + for &x in table.iter() { + writeln!(out, " {},", x)?; + } + writeln!(out, " ],")?; + } + writeln!(out, "];")?; + + out.flush()?; + + Ok(()) +} + +fn make_table16(poly: u32) -> [[u32; 256]; 16] { + let mut tab = [[0; 256]; 16]; + tab[0] = make_table(poly); + for i in 0..256 { + let mut crc = tab[0][i]; + for j in 1..16 { + crc = (crc >> 8) ^ tab[0][crc as u8 as usize]; + tab[j][i] = crc; + } + } + tab +} + +fn make_table(poly: u32) -> [u32; 256] { + let mut tab = [0; 256]; + for i in 0u32..256u32 { + let mut crc = i; + for _ in 0..8 { + if crc & 1 == 1 { + crc = (crc >> 1) ^ poly; + } else { + crc >>= 1; + } + } + tab[i as usize] = crc; + } + tab +} diff --git a/vendor/snap/examples/compress-escaped.rs b/vendor/snap/examples/compress-escaped.rs new file mode 100644 index 000000000..6fc97e9ac --- /dev/null +++ b/vendor/snap/examples/compress-escaped.rs @@ -0,0 +1,39 @@ +use std::env; +use std::io::{self, Write}; +use std::process; + +fn main() { + let bytes = match env::args().nth(1) { + None => { + writeln!(&mut io::stderr(), "Usage: compress-escaped string") + .unwrap(); + process::exit(1); + } + Some(arg) => arg.into_bytes(), + }; + let compressed = frame_press(&bytes); + println!("{}", escape(&compressed)); + println!("{}", escape(&frame_depress(&compressed))); +} + +fn frame_press(bytes: &[u8]) -> Vec { + use snap::write; + + let mut wtr = write::FrameEncoder::new(vec![]); + wtr.write_all(bytes).unwrap(); + wtr.into_inner().unwrap() +} + +fn frame_depress(bytes: &[u8]) -> Vec { + use snap::read; + use std::io::Read; + + let mut buf = vec![]; + read::FrameDecoder::new(bytes).read_to_end(&mut buf).unwrap(); + buf +} + +fn escape(bytes: &[u8]) -> String { + use std::ascii::escape_default; + bytes.iter().flat_map(|&b| escape_default(b)).map(|b| b as char).collect() +} diff --git a/vendor/snap/examples/compress.rs b/vendor/snap/examples/compress.rs new file mode 100644 index 000000000..31d302c61 --- /dev/null +++ b/vendor/snap/examples/compress.rs @@ -0,0 +1,13 @@ +use snap; + +use std::io; + +fn main() { + let stdin = io::stdin(); + let stdout = io::stdout(); + + let mut rdr = stdin.lock(); + // Wrap the stdout writer in a Snappy writer. + let mut wtr = snap::write::FrameEncoder::new(stdout.lock()); + io::copy(&mut rdr, &mut wtr).expect("I/O operation failed"); +} diff --git a/vendor/snap/examples/decompress.rs b/vendor/snap/examples/decompress.rs new file mode 100644 index 000000000..7548f2f03 --- /dev/null +++ b/vendor/snap/examples/decompress.rs @@ -0,0 +1,13 @@ +use snap; + +use std::io; + +fn main() { + let stdin = io::stdin(); + let stdout = io::stdout(); + + // Wrap the stdin reader in a Snappy reader. + let mut rdr = snap::read::FrameDecoder::new(stdin.lock()); + let mut wtr = stdout.lock(); + io::copy(&mut rdr, &mut wtr).expect("I/O operation failed"); +} diff --git a/vendor/snap/rustfmt.toml b/vendor/snap/rustfmt.toml new file mode 100644 index 000000000..aa37a218b --- /dev/null +++ b/vendor/snap/rustfmt.toml @@ -0,0 +1,2 @@ +max_width = 79 +use_small_heuristics = "max" diff --git a/vendor/snap/src/bytes.rs b/vendor/snap/src/bytes.rs new file mode 100644 index 000000000..4f198c668 --- /dev/null +++ b/vendor/snap/src/bytes.rs @@ -0,0 +1,118 @@ +use std::convert::TryInto; +use std::io; + +/// Read a u16 in little endian format from the beginning of the given slice. +/// This panics if the slice has length less than 2. +pub fn read_u16_le(slice: &[u8]) -> u16 { + u16::from_le_bytes(slice[..2].try_into().unwrap()) +} + +/// Read a u24 (returned as a u32 with the most significant 8 bits always set +/// to 0) in little endian format from the beginning of the given slice. This +/// panics if the slice has length less than 3. +pub fn read_u24_le(slice: &[u8]) -> u32 { + slice[0] as u32 | (slice[1] as u32) << 8 | (slice[2] as u32) << 16 +} + +/// Read a u32 in little endian format from the beginning of the given slice. +/// This panics if the slice has length less than 4. +pub fn read_u32_le(slice: &[u8]) -> u32 { + u32::from_le_bytes(slice[..4].try_into().unwrap()) +} + +/// Like read_u32_le, but from an io::Read implementation. If io::Read does +/// not yield at least 4 bytes, then this returns an unexpected EOF error. +pub fn io_read_u32_le(mut rdr: R) -> io::Result { + let mut buf = [0; 4]; + rdr.read_exact(&mut buf)?; + Ok(u32::from_le_bytes(buf)) +} + +/// Write a u16 in little endian format to the beginning of the given slice. +/// This panics if the slice has length less than 2. +pub fn write_u16_le(n: u16, slice: &mut [u8]) { + assert!(slice.len() >= 2); + let bytes = n.to_le_bytes(); + slice[0] = bytes[0]; + slice[1] = bytes[1]; +} + +/// Write a u24 (given as a u32 where the most significant 8 bits are ignored) +/// in little endian format to the beginning of the given slice. This panics +/// if the slice has length less than 3. +pub fn write_u24_le(n: u32, slice: &mut [u8]) { + slice[0] = n as u8; + slice[1] = (n >> 8) as u8; + slice[2] = (n >> 16) as u8; +} + +/// Write a u32 in little endian format to the beginning of the given slice. +/// This panics if the slice has length less than 4. +pub fn write_u32_le(n: u32, slice: &mut [u8]) { + assert!(slice.len() >= 4); + let bytes = n.to_le_bytes(); + slice[0] = bytes[0]; + slice[1] = bytes[1]; + slice[2] = bytes[2]; + slice[3] = bytes[3]; +} + +/// https://developers.google.com/protocol-buffers/docs/encoding#varints +pub fn write_varu64(data: &mut [u8], mut n: u64) -> usize { + let mut i = 0; + while n >= 0b1000_0000 { + data[i] = (n as u8) | 0b1000_0000; + n >>= 7; + i += 1; + } + data[i] = n as u8; + i + 1 +} + +/// https://developers.google.com/protocol-buffers/docs/encoding#varints +pub fn read_varu64(data: &[u8]) -> (u64, usize) { + let mut n: u64 = 0; + let mut shift: u32 = 0; + for (i, &b) in data.iter().enumerate() { + if b < 0b1000_0000 { + return match (b as u64).checked_shl(shift) { + None => (0, 0), + Some(b) => (n | b, i + 1), + }; + } + match ((b as u64) & 0b0111_1111).checked_shl(shift) { + None => return (0, 0), + Some(b) => n |= b, + } + shift += 7; + } + (0, 0) +} + +/// Does an unaligned load of a little endian encoded u32. +/// +/// This is unsafe because `data` must point to some memory of size at least 4. +pub unsafe fn loadu_u32_le(data: *const u8) -> u32 { + loadu_u32_ne(data).to_le() +} + +/// Does an unaligned load of a native endian encoded u32. +/// +/// This is unsafe because `data` must point to some memory of size at least 4. +pub unsafe fn loadu_u32_ne(data: *const u8) -> u32 { + (data as *const u32).read_unaligned() +} + +/// Does an unaligned load of a little endian encoded u64. +/// +/// This is unsafe because `data` must point to some memory of size at least 8. +pub unsafe fn loadu_u64_le(data: *const u8) -> u64 { + loadu_u64_ne(data).to_le() +} + +/// Does an unaligned load of a native endian encoded u64. +/// +/// This is unsafe because `data` must point to some memory of size at least 8. +pub unsafe fn loadu_u64_ne(data: *const u8) -> u64 { + (data as *const u64).read_unaligned() +} diff --git a/vendor/snap/src/compress.rs b/vendor/snap/src/compress.rs new file mode 100644 index 000000000..1a6638df4 --- /dev/null +++ b/vendor/snap/src/compress.rs @@ -0,0 +1,539 @@ +use std::fmt; +use std::ops::{Deref, DerefMut}; +use std::ptr; + +use crate::bytes; +use crate::error::{Error, Result}; +use crate::{MAX_BLOCK_SIZE, MAX_INPUT_SIZE}; + +/// The total number of slots we permit for our hash table of 4 byte repeat +/// sequences. +const MAX_TABLE_SIZE: usize = 1 << 14; + +/// The size of a small hash table. This is useful for reducing overhead when +/// compressing very small blocks of bytes. +const SMALL_TABLE_SIZE: usize = 1 << 10; + +/// The total number of bytes that we always leave uncompressed at the end +/// of the buffer. This in particular affords us some wiggle room during +/// compression such that faster copy operations can be used. +const INPUT_MARGIN: usize = 16 - 1; + +/// The minimum block size that we're willing to consider for compression. +/// Anything smaller than this gets emitted as a literal. +const MIN_NON_LITERAL_BLOCK_SIZE: usize = 1 + 1 + INPUT_MARGIN; + +/// Nice names for the various Snappy tags. +enum Tag { + Literal = 0b00, + Copy1 = 0b01, + Copy2 = 0b10, + // Compression never actually emits a Copy4 operation and decompression + // uses tricks so that we never explicitly do case analysis on the copy + // operation type, therefore leading to the fact that we never use Copy4. + #[allow(dead_code)] + Copy4 = 0b11, +} + +/// Returns the maximum compressed size given the uncompressed size. +/// +/// If the uncompressed size exceeds the maximum allowable size then this +/// returns 0. +pub fn max_compress_len(input_len: usize) -> usize { + let input_len = input_len as u64; + if input_len > MAX_INPUT_SIZE { + return 0; + } + let max = 32 + input_len + (input_len / 6); + if max > MAX_INPUT_SIZE { + 0 + } else { + max as usize + } +} + +/// Encoder is a raw encoder for compressing bytes in the Snappy format. +/// +/// Thie encoder does not use the Snappy frame format and simply compresses the +/// given bytes in one big Snappy block (that is, it has a single header). +/// +/// Unless you explicitly need the low-level control, you should use +/// [`read::FrameEncoder`](../read/struct.FrameEncoder.html) +/// or +/// [`write::FrameEncoder`](../write/struct.FrameEncoder.html) +/// instead, which compresses to the Snappy frame format. +/// +/// It is beneficial to reuse an Encoder when possible. +pub struct Encoder { + small: [u16; SMALL_TABLE_SIZE], + big: Vec, +} + +impl fmt::Debug for Encoder { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + write!(f, "Encoder(...)") + } +} + +impl Encoder { + /// Return a new encoder that can be used for compressing bytes. + pub fn new() -> Encoder { + Encoder { small: [0; SMALL_TABLE_SIZE], big: vec![] } + } + + /// Compresses all bytes in `input` into `output`. + /// + /// `input` can be any arbitrary sequence of bytes. + /// + /// `output` must be large enough to hold the maximum possible compressed + /// size of `input`, which can be computed using `max_compress_len`. + /// + /// On success, this returns the number of bytes written to `output`. + /// + /// # Errors + /// + /// This method returns an error in the following circumstances: + /// + /// * The total number of bytes to compress exceeds `2^32 - 1`. + /// * `output` has length less than `max_compress_len(input.len())`. + pub fn compress( + &mut self, + mut input: &[u8], + output: &mut [u8], + ) -> Result { + match max_compress_len(input.len()) { + 0 => { + return Err(Error::TooBig { + given: input.len() as u64, + max: MAX_INPUT_SIZE, + }); + } + min if output.len() < min => { + return Err(Error::BufferTooSmall { + given: output.len() as u64, + min: min as u64, + }); + } + _ => {} + } + // Handle an edge case specially. + if input.is_empty() { + // Encodes a varint of 0, denoting the total size of uncompressed + // bytes. + output[0] = 0; + return Ok(1); + } + // Write the Snappy header, which is just the total number of + // uncompressed bytes. + let mut d = bytes::write_varu64(output, input.len() as u64); + while !input.is_empty() { + // Find the next block. + let mut src = input; + if src.len() > MAX_BLOCK_SIZE { + src = &src[..MAX_BLOCK_SIZE as usize]; + } + input = &input[src.len()..]; + + // If the block is smallish, then don't waste time on it and just + // emit a literal. + let mut block = Block::new(src, output, d); + if block.src.len() < MIN_NON_LITERAL_BLOCK_SIZE { + let lit_end = block.src.len(); + unsafe { + // SAFETY: next_emit is zero (in bounds) and the end is + // the length of the block (in bounds). + block.emit_literal(lit_end); + } + } else { + let table = self.block_table(block.src.len()); + block.compress(table); + } + d = block.d; + } + Ok(d) + } + + /// Compresses all bytes in `input` into a freshly allocated `Vec`. + /// + /// This is just like the `compress` method, except it allocates a `Vec` + /// with the right size for you. (This is intended to be a convenience + /// method.) + /// + /// This method returns an error under the same circumstances that + /// `compress` does. + pub fn compress_vec(&mut self, input: &[u8]) -> Result> { + let mut buf = vec![0; max_compress_len(input.len())]; + let n = self.compress(input, &mut buf)?; + buf.truncate(n); + Ok(buf) + } +} + +struct Block<'s, 'd> { + src: &'s [u8], + s: usize, + s_limit: usize, + dst: &'d mut [u8], + d: usize, + next_emit: usize, +} + +impl<'s, 'd> Block<'s, 'd> { + #[inline(always)] + fn new(src: &'s [u8], dst: &'d mut [u8], d: usize) -> Block<'s, 'd> { + Block { + src: src, + s: 0, + s_limit: src.len(), + dst: dst, + d: d, + next_emit: 0, + } + } + + #[inline(always)] + fn compress(&mut self, mut table: BlockTable<'_>) { + debug_assert!(!table.is_empty()); + debug_assert!(self.src.len() >= MIN_NON_LITERAL_BLOCK_SIZE); + + self.s += 1; + self.s_limit -= INPUT_MARGIN; + let mut next_hash = + table.hash(bytes::read_u32_le(&self.src[self.s..])); + loop { + let mut skip = 32; + let mut candidate; + let mut s_next = self.s; + loop { + self.s = s_next; + let bytes_between_hash_lookups = skip >> 5; + s_next = self.s + bytes_between_hash_lookups; + skip += bytes_between_hash_lookups; + if s_next > self.s_limit { + return self.done(); + } + unsafe { + // SAFETY: next_hash is always computed by table.hash + // which is guaranteed to be in bounds. + candidate = *table.get_unchecked(next_hash) as usize; + *table.get_unchecked_mut(next_hash) = self.s as u16; + + let srcp = self.src.as_ptr(); + // SAFETY: s_next is guaranteed to be less than s_limit by + // the conditional above, which implies s_next is in + // bounds. + let x = bytes::loadu_u32_le(srcp.add(s_next)); + next_hash = table.hash(x); + // SAFETY: self.s is always less than s_next, so it is also + // in bounds by the argument above. + // + // candidate is extracted from table, which is only ever + // set to valid positions in the block and is therefore + // also in bounds. + // + // We only need to compare y/z for equality, so we don't + // need to both with endianness. cur corresponds to the + // bytes at the current position and cand corresponds to + // a potential match. If they're equal, we declare victory + // and move below to try and extend the match. + let cur = bytes::loadu_u32_ne(srcp.add(self.s)); + let cand = bytes::loadu_u32_ne(srcp.add(candidate)); + if cur == cand { + break; + } + } + } + // While the above found a candidate for compression, before we + // emit a copy operation for it, we need to make sure that we emit + // any bytes between the last copy operation and this one as a + // literal. + let lit_end = self.s; + unsafe { + // SAFETY: next_emit is set to a previous value of self.s, + // which is guaranteed to be less than s_limit (in bounds). + // lit_end is set to the current value of self.s, also + // guaranteed to be less than s_limit (in bounds). + self.emit_literal(lit_end); + } + loop { + // Look for more matching bytes starting at the position of + // the candidate and the current src position. We increment + // self.s and candidate by 4 since we already know the first 4 + // bytes match. + let base = self.s; + self.s += 4; + unsafe { + // SAFETY: candidate is always set to a value from our + // hash table, which only contains positions in self.src + // that have been seen for this block that occurred before + // self.s. + self.extend_match(candidate + 4); + } + let (offset, len) = (base - candidate, self.s - base); + self.emit_copy(offset, len); + self.next_emit = self.s; + if self.s >= self.s_limit { + return self.done(); + } + // Update the hash table with the byte sequences + // self.src[self.s - 1..self.s + 3] and + // self.src[self.s..self.s + 4]. Instead of reading 4 bytes + // twice, we read 8 bytes once. + // + // If we happen to get a hit on self.src[self.s..self.s + 4], + // then continue this loop and extend the match. + unsafe { + let srcp = self.src.as_ptr(); + // SAFETY: self.s can never exceed s_limit given by the + // conditional above and self.s is guaranteed to be + // non-zero and is therefore in bounds. + let x = bytes::loadu_u64_le(srcp.add(self.s - 1)); + // The lower 4 bytes of x correspond to + // self.src[self.s - 1..self.s + 3]. + let prev_hash = table.hash(x as u32); + // SAFETY: Hash values are guaranteed to be in bounds. + *table.get_unchecked_mut(prev_hash) = (self.s - 1) as u16; + // The lower 4 bytes of x>>8 correspond to + // self.src[self.s..self.s + 4]. + let cur_hash = table.hash((x >> 8) as u32); + // SAFETY: Hash values are guaranteed to be in bounds. + candidate = *table.get_unchecked(cur_hash) as usize; + *table.get_unchecked_mut(cur_hash) = self.s as u16; + + // SAFETY: candidate is set from table, which always + // contains valid positions in the current block. + let y = bytes::loadu_u32_le(srcp.add(candidate)); + if (x >> 8) as u32 != y { + // If we didn't get a hit, update the next hash + // and move on. Our initial 8 byte read continues to + // pay off. + next_hash = table.hash((x >> 16) as u32); + self.s += 1; + break; + } + } + } + } + } + + /// Emits one or more copy operations with the given offset and length. + /// offset must be in the range [1, 65535] and len must be in the range + /// [4, 65535]. + #[inline(always)] + fn emit_copy(&mut self, offset: usize, mut len: usize) { + debug_assert!(1 <= offset && offset <= 65535); + // Copy operations only allow lengths up to 64, but we'll allow bigger + // lengths and emit as many operations as we need. + // + // N.B. Since our block size is 64KB, we never actually emit a copy 4 + // operation. + debug_assert!(4 <= len && len <= 65535); + + // Emit copy 2 operations until we don't have to. + // We check on 68 here and emit a shorter copy than 64 below because + // it is cheaper to, e.g., encode a length 67 copy as a length 60 + // copy 2 followed by a length 7 copy 1 than to encode it as a length + // 64 copy 2 followed by a length 3 copy 2. They key here is that a + // copy 1 operation requires at least length 4 which forces a length 3 + // copy to use a copy 2 operation. + while len >= 68 { + self.emit_copy2(offset, 64); + len -= 64; + } + if len > 64 { + self.emit_copy2(offset, 60); + len -= 60; + } + // If we can squeeze the last copy into a copy 1 operation, do it. + if len <= 11 && offset <= 2047 { + self.dst[self.d] = (((offset >> 8) as u8) << 5) + | (((len - 4) as u8) << 2) + | (Tag::Copy1 as u8); + self.dst[self.d + 1] = offset as u8; + self.d += 2; + } else { + self.emit_copy2(offset, len); + } + } + + /// Emits a "copy 2" operation with the given offset and length. The + /// offset and length must be valid for a copy 2 operation. i.e., offset + /// must be in the range [1, 65535] and len must be in the range [1, 64]. + #[inline(always)] + fn emit_copy2(&mut self, offset: usize, len: usize) { + debug_assert!(1 <= offset && offset <= 65535); + debug_assert!(1 <= len && len <= 64); + self.dst[self.d] = (((len - 1) as u8) << 2) | (Tag::Copy2 as u8); + bytes::write_u16_le(offset as u16, &mut self.dst[self.d + 1..]); + self.d += 3; + } + + /// Attempts to extend a match from the current position in self.src with + /// the candidate position given. + /// + /// This method uses unaligned loads and elides bounds checks, so the + /// caller must guarantee that cand points to a valid location in self.src + /// and is less than the current position in src. + #[inline(always)] + unsafe fn extend_match(&mut self, mut cand: usize) { + debug_assert!(cand < self.s); + while self.s + 8 <= self.src.len() { + let srcp = self.src.as_ptr(); + // SAFETY: The loop invariant guarantees that there is at least + // 8 bytes to read at self.src + self.s. Since cand must be + // guaranteed by the caller to be valid and less than self.s, it + // also has enough room to read 8 bytes. + // + // TODO(ag): Despite my best efforts, I couldn't get this to + // autovectorize with 128-bit loads. The logic after the loads + // appears to be a little too clever... + let x = bytes::loadu_u64_ne(srcp.add(self.s)); + let y = bytes::loadu_u64_ne(srcp.add(cand)); + if x == y { + // If all 8 bytes are equal, move on... + self.s += 8; + cand += 8; + } else { + // Otherwise, find the last byte that was equal. We can do + // this efficiently by interpreted x/y as little endian + // numbers, which lets us use the number of trailing zeroes + // as a proxy for the number of equivalent bits (after an XOR). + let z = x.to_le() ^ y.to_le(); + self.s += z.trailing_zeros() as usize / 8; + return; + } + } + // When we have fewer than 8 bytes left in the block, fall back to the + // slow loop. + while self.s < self.src.len() && self.src[self.s] == self.src[cand] { + self.s += 1; + cand += 1; + } + } + + /// Executes any cleanup when the current block has finished compressing. + /// In particular, it emits any leftover bytes as a literal. + #[inline(always)] + fn done(&mut self) { + if self.next_emit < self.src.len() { + let lit_end = self.src.len(); + unsafe { + // SAFETY: Both next_emit and lit_end are trivially in bounds + // given the conditional and definition above. + self.emit_literal(lit_end); + } + } + } + + /// Emits a literal from self.src[self.next_emit..lit_end]. + /// + /// This uses unaligned loads and elides bounds checks, so the caller must + /// guarantee that self.src[self.next_emit..lit_end] is valid. + #[inline(always)] + unsafe fn emit_literal(&mut self, lit_end: usize) { + let lit_start = self.next_emit; + let len = lit_end - lit_start; + let n = len.checked_sub(1).unwrap(); + if n <= 59 { + self.dst[self.d] = ((n as u8) << 2) | (Tag::Literal as u8); + self.d += 1; + if len <= 16 && lit_start + 16 <= self.src.len() { + // SAFETY: lit_start is equivalent to self.next_emit, which is + // only set to self.s immediately following a copy emit. The + // conditional above also ensures that there is at least 16 + // bytes of room in both src and dst. + // + // dst is big enough because the buffer is guaranteed to + // be big enough to hold biggest possible compressed size plus + // an extra 32 bytes, which exceeds the 16 byte copy here. + let srcp = self.src.as_ptr().add(lit_start); + let dstp = self.dst.as_mut_ptr().add(self.d); + ptr::copy_nonoverlapping(srcp, dstp, 16); + self.d += len; + return; + } + } else if n < 256 { + self.dst[self.d] = (60 << 2) | (Tag::Literal as u8); + self.dst[self.d + 1] = n as u8; + self.d += 2; + } else { + self.dst[self.d] = (61 << 2) | (Tag::Literal as u8); + bytes::write_u16_le(n as u16, &mut self.dst[self.d + 1..]); + self.d += 3; + } + // SAFETY: lit_start is equivalent to self.next_emit, which is only set + // to self.s immediately following a copy, which implies that it always + // points to valid bytes in self.src. + // + // We can't guarantee that there are at least len bytes though, which + // must be guaranteed by the caller and is why this method is unsafe. + let srcp = self.src.as_ptr().add(lit_start); + let dstp = self.dst.as_mut_ptr().add(self.d); + ptr::copy_nonoverlapping(srcp, dstp, len); + self.d += len; + } +} + +/// `BlockTable` is a map from 4 byte sequences to positions of their most +/// recent occurrence in a block. In particular, this table lets us quickly +/// find candidates for compression. +/// +/// We expose the `hash` method so that callers can be fastidious about the +/// number of times a hash is computed. +struct BlockTable<'a> { + table: &'a mut [u16], + /// The number of bits required to shift the hash such that the result + /// is less than table.len(). + shift: u32, +} + +impl Encoder { + fn block_table(&mut self, block_size: usize) -> BlockTable<'_> { + let mut shift: u32 = 32 - 8; + let mut table_size = 256; + while table_size < MAX_TABLE_SIZE && table_size < block_size { + shift -= 1; + table_size *= 2; + } + // If our block size is small, then use a small stack allocated table + // instead of putting a bigger one on the heap. This particular + // optimization is important if the caller is using Snappy to compress + // many small blocks. (The memset savings alone is considerable.) + let table: &mut [u16] = if table_size <= SMALL_TABLE_SIZE { + &mut self.small[0..table_size] + } else { + if self.big.is_empty() { + // Interestingly, using `self.big.resize` here led to some + // very weird code getting generated that led to a large + // slow down. Forcing the issue with a new vec seems to + // fix it. ---AG + self.big = vec![0; MAX_TABLE_SIZE]; + } + &mut self.big[0..table_size] + }; + for x in &mut *table { + *x = 0; + } + BlockTable { table: table, shift: shift } + } +} + +impl<'a> BlockTable<'a> { + #[inline(always)] + fn hash(&self, x: u32) -> usize { + (x.wrapping_mul(0x1E35A7BD) >> self.shift) as usize + } +} + +impl<'a> Deref for BlockTable<'a> { + type Target = [u16]; + fn deref(&self) -> &[u16] { + self.table + } +} + +impl<'a> DerefMut for BlockTable<'a> { + fn deref_mut(&mut self) -> &mut [u16] { + self.table + } +} diff --git a/vendor/snap/src/crc32.rs b/vendor/snap/src/crc32.rs new file mode 100644 index 000000000..1298ef04a --- /dev/null +++ b/vendor/snap/src/crc32.rs @@ -0,0 +1,111 @@ +use crate::bytes; +use crate::crc32_table::{TABLE, TABLE16}; + +/// Provides a simple API to generate "masked" CRC32C checksums specifically +/// for use in Snappy. When available, this will make use of SSE 4.2 to compute +/// checksums. Otherwise, it falls back to only-marginally-slower "slicing by +/// 16" technique. +/// +/// The main purpose of this type is to cache the CPU feature check and expose +/// a safe API. +#[derive(Clone, Copy, Debug)] +pub struct CheckSummer { + sse42: bool, +} + +impl CheckSummer { + /// Create a new checksummer that can compute CRC32C checksums on arbitrary + /// bytes. + #[cfg(not(target_arch = "x86_64"))] + pub fn new() -> CheckSummer { + CheckSummer { sse42: false } + } + + /// Create a new checksummer that can compute CRC32C checksums on arbitrary + /// bytes. + #[cfg(target_arch = "x86_64")] + pub fn new() -> CheckSummer { + CheckSummer { sse42: is_x86_feature_detected!("sse4.2") } + } + + /// Returns the "masked" CRC32 checksum of `buf` using the Castagnoli + /// polynomial. This "masked" checksum is defined by the Snappy frame + /// format. Masking is supposed to make the checksum robust with respect to + /// the data that contains the checksum itself. + pub fn crc32c_masked(&self, buf: &[u8]) -> u32 { + let sum = self.crc32c(buf); + (sum.wrapping_shr(15) | sum.wrapping_shl(17)).wrapping_add(0xA282EAD8) + } + + /// Returns the CRC32 checksum of `buf` using the Castagnoli polynomial. + #[cfg(not(target_arch = "x86_64"))] + fn crc32c(&self, buf: &[u8]) -> u32 { + crc32c_slice16(buf) + } + + /// Returns the CRC32 checksum of `buf` using the Castagnoli polynomial. + #[cfg(target_arch = "x86_64")] + fn crc32c(&self, buf: &[u8]) -> u32 { + if self.sse42 { + // SAFETY: When sse42 is true, we are guaranteed to be running on + // a CPU that supports SSE 4.2. + unsafe { crc32c_sse(buf) } + } else { + crc32c_slice16(buf) + } + } +} + +#[cfg(target_arch = "x86_64")] +#[target_feature(enable = "sse4.2")] +unsafe fn crc32c_sse(buf: &[u8]) -> u32 { + use std::arch::x86_64::*; + + let mut crc = !0u32; + // SAFETY: This is safe since alignment is handled by align_to (oh how I + // love you) and since 8 adjacent u8's are guaranteed to have the same + // in-memory representation as u64 for all possible values. + let (prefix, u64s, suffix) = buf.align_to::(); + for &b in prefix { + // SAFETY: Safe since we have sse4.2 enabled. + crc = _mm_crc32_u8(crc, b); + } + for &n in u64s { + // SAFETY: Safe since we have sse4.2 enabled. + crc = _mm_crc32_u64(crc as u64, n) as u32; + } + for &b in suffix { + // SAFETY: Safe since we have sse4.2 enabled. + crc = _mm_crc32_u8(crc, b); + } + !crc +} + +/// Returns the CRC32 checksum of `buf` using the Castagnoli polynomial. +fn crc32c_slice16(mut buf: &[u8]) -> u32 { + let mut crc: u32 = !0; + while buf.len() >= 16 { + crc ^= bytes::read_u32_le(buf); + crc = TABLE16[0][buf[15] as usize] + ^ TABLE16[1][buf[14] as usize] + ^ TABLE16[2][buf[13] as usize] + ^ TABLE16[3][buf[12] as usize] + ^ TABLE16[4][buf[11] as usize] + ^ TABLE16[5][buf[10] as usize] + ^ TABLE16[6][buf[9] as usize] + ^ TABLE16[7][buf[8] as usize] + ^ TABLE16[8][buf[7] as usize] + ^ TABLE16[9][buf[6] as usize] + ^ TABLE16[10][buf[5] as usize] + ^ TABLE16[11][buf[4] as usize] + ^ TABLE16[12][(crc >> 24) as u8 as usize] + ^ TABLE16[13][(crc >> 16) as u8 as usize] + ^ TABLE16[14][(crc >> 8) as u8 as usize] + ^ TABLE16[15][(crc) as u8 as usize]; + buf = &buf[16..]; + } + for &b in buf { + crc = TABLE[((crc as u8) ^ b) as usize] ^ (crc >> 8); + } + !crc +} diff --git a/vendor/snap/src/crc32_table.rs b/vendor/snap/src/crc32_table.rs new file mode 100644 index 000000000..7821b5d86 --- /dev/null +++ b/vendor/snap/src/crc32_table.rs @@ -0,0 +1,2 @@ +// Generated by build.rs. +include!(concat!(env!("OUT_DIR"), "/crc32_table.rs")); diff --git a/vendor/snap/src/decompress.rs b/vendor/snap/src/decompress.rs new file mode 100644 index 000000000..07ab16b4c --- /dev/null +++ b/vendor/snap/src/decompress.rs @@ -0,0 +1,470 @@ +use std::ptr; + +use crate::bytes; +use crate::error::{Error, Result}; +use crate::tag; +use crate::MAX_INPUT_SIZE; + +/// A lookup table for quickly computing the various attributes derived from a +/// tag byte. +const TAG_LOOKUP_TABLE: TagLookupTable = TagLookupTable(tag::TAG_LOOKUP_TABLE); + +/// `WORD_MASK` is a map from the size of an integer in bytes to its +/// corresponding on a 32 bit integer. This is used when we need to read an +/// integer and we know there are at least 4 bytes to read from a buffer. In +/// this case, we can read a 32 bit little endian integer and mask out only the +/// bits we need. This in particular saves a branch. +const WORD_MASK: [usize; 5] = [0, 0xFF, 0xFFFF, 0xFFFFFF, 0xFFFFFFFF]; + +/// Returns the decompressed size (in bytes) of the compressed bytes given. +/// +/// `input` must be a sequence of bytes returned by a conforming Snappy +/// compressor. +/// +/// # Errors +/// +/// This function returns an error in the following circumstances: +/// +/// * An invalid Snappy header was seen. +/// * The total space required for decompression exceeds `2^32 - 1`. +pub fn decompress_len(input: &[u8]) -> Result { + if input.is_empty() { + return Ok(0); + } + Ok(Header::read(input)?.decompress_len) +} + +/// Decoder is a raw decoder for decompressing bytes in the Snappy format. +/// +/// This decoder does not use the Snappy frame format and simply decompresses +/// the given bytes as if it were returned from `Encoder`. +/// +/// Unless you explicitly need the low-level control, you should use +/// [`read::FrameDecoder`](../read/struct.FrameDecoder.html) +/// instead, which decompresses the Snappy frame format. +#[derive(Clone, Debug, Default)] +pub struct Decoder { + // Place holder for potential future fields. + _dummy: (), +} + +impl Decoder { + /// Return a new decoder that can be used for decompressing bytes. + pub fn new() -> Decoder { + Decoder { _dummy: () } + } + + /// Decompresses all bytes in `input` into `output`. + /// + /// `input` must be a sequence of bytes returned by a conforming Snappy + /// compressor. + /// + /// The size of `output` must be large enough to hold all decompressed + /// bytes from the `input`. The size required can be queried with the + /// `decompress_len` function. + /// + /// On success, this returns the number of bytes written to `output`. + /// + /// # Errors + /// + /// This method returns an error in the following circumstances: + /// + /// * Invalid compressed Snappy data was seen. + /// * The total space required for decompression exceeds `2^32 - 1`. + /// * `output` has length less than `decompress_len(input)`. + pub fn decompress( + &mut self, + input: &[u8], + output: &mut [u8], + ) -> Result { + if input.is_empty() { + return Err(Error::Empty); + } + let hdr = Header::read(input)?; + if hdr.decompress_len > output.len() { + return Err(Error::BufferTooSmall { + given: output.len() as u64, + min: hdr.decompress_len as u64, + }); + } + let dst = &mut output[..hdr.decompress_len]; + let mut dec = + Decompress { src: &input[hdr.len..], s: 0, dst: dst, d: 0 }; + dec.decompress()?; + Ok(dec.dst.len()) + } + + /// Decompresses all bytes in `input` into a freshly allocated `Vec`. + /// + /// This is just like the `decompress` method, except it allocates a `Vec` + /// with the right size for you. (This is intended to be a convenience + /// method.) + /// + /// This method returns an error under the same circumstances that + /// `decompress` does. + pub fn decompress_vec(&mut self, input: &[u8]) -> Result> { + let mut buf = vec![0; decompress_len(input)?]; + let n = self.decompress(input, &mut buf)?; + buf.truncate(n); + Ok(buf) + } +} + +/// Decompress is the state of the Snappy compressor. +struct Decompress<'s, 'd> { + /// The original compressed bytes not including the header. + src: &'s [u8], + /// The current position in the compressed bytes. + s: usize, + /// The output buffer to write the decompressed bytes. + dst: &'d mut [u8], + /// The current position in the decompressed buffer. + d: usize, +} + +impl<'s, 'd> Decompress<'s, 'd> { + /// Decompresses snappy compressed bytes in `src` to `dst`. + /// + /// This assumes that the header has already been read and that `dst` is + /// big enough to store all decompressed bytes. + fn decompress(&mut self) -> Result<()> { + while self.s < self.src.len() { + let byte = self.src[self.s]; + self.s += 1; + if byte & 0b000000_11 == 0 { + let len = (byte >> 2) as usize + 1; + self.read_literal(len)?; + } else { + self.read_copy(byte)?; + } + } + if self.d != self.dst.len() { + return Err(Error::HeaderMismatch { + expected_len: self.dst.len() as u64, + got_len: self.d as u64, + }); + } + Ok(()) + } + + /// Decompresses a literal from `src` starting at `s` to `dst` starting at + /// `d` and returns the updated values of `s` and `d`. `s` should point to + /// the byte immediately proceding the literal tag byte. + /// + /// `len` is the length of the literal if it's <=60. Otherwise, it's the + /// length tag, indicating the number of bytes needed to read a little + /// endian integer at `src[s..]`. i.e., `61 => 1 byte`, `62 => 2 bytes`, + /// `63 => 3 bytes` and `64 => 4 bytes`. + /// + /// `len` must be <=64. + #[inline(always)] + fn read_literal(&mut self, len: usize) -> Result<()> { + debug_assert!(len <= 64); + let mut len = len as u64; + // As an optimization for the common case, if the literal length is + // <=16 and we have enough room in both `src` and `dst`, copy the + // literal using unaligned loads and stores. + // + // We pick 16 bytes with the hope that it optimizes down to a 128 bit + // load/store. + if len <= 16 + && self.s + 16 <= self.src.len() + && self.d + 16 <= self.dst.len() + { + unsafe { + // SAFETY: We know both src and dst have at least 16 bytes of + // wiggle room after s/d, even if `len` is <16, so the copy is + // safe. + let srcp = self.src.as_ptr().add(self.s); + let dstp = self.dst.as_mut_ptr().add(self.d); + // Hopefully uses SIMD registers for 128 bit load/store. + ptr::copy_nonoverlapping(srcp, dstp, 16); + } + self.d += len as usize; + self.s += len as usize; + return Ok(()); + } + // When the length is bigger than 60, it indicates that we need to read + // an additional 1-4 bytes to get the real length of the literal. + if len >= 61 { + // If there aren't at least 4 bytes left to read then we know this + // is corrupt because the literal must have length >=61. + if self.s as u64 + 4 > self.src.len() as u64 { + return Err(Error::Literal { + len: 4, + src_len: (self.src.len() - self.s) as u64, + dst_len: (self.dst.len() - self.d) as u64, + }); + } + // Since we know there are 4 bytes left to read, read a 32 bit LE + // integer and mask away the bits we don't need. + let byte_count = len as usize - 60; + len = bytes::read_u32_le(&self.src[self.s..]) as u64; + len = (len & (WORD_MASK[byte_count] as u64)) + 1; + self.s += byte_count; + } + // If there's not enough buffer left to load or store this literal, + // then the input is corrupt. + // if self.s + len > self.src.len() || self.d + len > self.dst.len() { + if ((self.src.len() - self.s) as u64) < len + || ((self.dst.len() - self.d) as u64) < len + { + return Err(Error::Literal { + len: len, + src_len: (self.src.len() - self.s) as u64, + dst_len: (self.dst.len() - self.d) as u64, + }); + } + unsafe { + // SAFETY: We've already checked the bounds, so we know this copy + // is correct. + let srcp = self.src.as_ptr().add(self.s); + let dstp = self.dst.as_mut_ptr().add(self.d); + ptr::copy_nonoverlapping(srcp, dstp, len as usize); + } + self.s += len as usize; + self.d += len as usize; + Ok(()) + } + + /// Reads a copy from `src` and writes the decompressed bytes to `dst`. `s` + /// should point to the byte immediately proceding the copy tag byte. + #[inline(always)] + fn read_copy(&mut self, tag_byte: u8) -> Result<()> { + // Find the copy offset and len, then advance the input past the copy. + // The rest of this function deals with reading/writing to output only. + let entry = TAG_LOOKUP_TABLE.entry(tag_byte); + let offset = entry.offset(self.src, self.s)?; + let len = entry.len(); + self.s += entry.num_tag_bytes(); + + // What we really care about here is whether `d == 0` or `d < offset`. + // To save an extra branch, use `d < offset - 1` instead. If `d` is + // `0`, then `offset.wrapping_sub(1)` will be usize::MAX which is also + // the max value of `d`. + if self.d <= offset.wrapping_sub(1) { + return Err(Error::Offset { + offset: offset as u64, + dst_pos: self.d as u64, + }); + } + // When all is said and done, dst is advanced to end. + let end = self.d + len; + // When the copy is small and the offset is at least 8 bytes away from + // `d`, then we can decompress the copy with two 64 bit unaligned + // loads/stores. + if offset >= 8 && len <= 16 && self.d + 16 <= self.dst.len() { + unsafe { + // SAFETY: We know dstp points to at least 16 bytes of memory + // from the condition above, and we also know that dstp is + // preceded by at least `offset` bytes from the `d <= offset` + // check above. + // + // We also know that dstp and dstp-8 do not overlap from the + // check above, justifying the use of copy_nonoverlapping. + let dstp = self.dst.as_mut_ptr().add(self.d); + let srcp = dstp.sub(offset); + // We can't do a single 16 byte load/store because src/dst may + // overlap with each other. Namely, the second copy here may + // copy bytes written in the first copy! + ptr::copy_nonoverlapping(srcp, dstp, 8); + ptr::copy_nonoverlapping(srcp.add(8), dstp.add(8), 8); + } + // If we have some wiggle room, try to decompress the copy 16 bytes + // at a time with 128 bit unaligned loads/stores. Remember, we can't + // just do a memcpy because decompressing copies may require copying + // overlapping memory. + // + // We need the extra wiggle room to make effective use of 128 bit + // loads/stores. Even if the store ends up copying more data than we + // need, we're careful to advance `d` by the correct amount at the end. + } else if end + 24 <= self.dst.len() { + unsafe { + // SAFETY: We know that dstp is preceded by at least `offset` + // bytes from the `d <= offset` check above. + // + // We don't know whether dstp overlaps with srcp, so we start + // by copying from srcp to dstp until they no longer overlap. + // The worst case is when dstp-src = 3 and copy length = 1. The + // first loop will issue these copy operations before stopping: + // + // [-1, 14] -> [0, 15] + // [-1, 14] -> [3, 18] + // [-1, 14] -> [9, 24] + // + // But the copy had length 1, so it was only supposed to write + // to [0, 0]. But the last copy wrote to [9, 24], which is 24 + // extra bytes in dst *beyond* the end of the copy, which is + // guaranteed by the conditional above. + let mut dstp = self.dst.as_mut_ptr().add(self.d); + let mut srcp = dstp.sub(offset); + loop { + debug_assert!(dstp >= srcp); + let diff = (dstp as usize) - (srcp as usize); + if diff >= 16 { + break; + } + // srcp and dstp can overlap, so use ptr::copy. + debug_assert!(self.d + 16 <= self.dst.len()); + ptr::copy(srcp, dstp, 16); + self.d += diff as usize; + dstp = dstp.add(diff); + } + while self.d < end { + ptr::copy_nonoverlapping(srcp, dstp, 16); + srcp = srcp.add(16); + dstp = dstp.add(16); + self.d += 16; + } + // At this point, `d` is likely wrong. We correct it before + // returning. It's correct value is `end`. + } + } else { + if end > self.dst.len() { + return Err(Error::CopyWrite { + len: len as u64, + dst_len: (self.dst.len() - self.d) as u64, + }); + } + // Finally, the slow byte-by-byte case, which should only be used + // for the last few bytes of decompression. + while self.d != end { + self.dst[self.d] = self.dst[self.d - offset]; + self.d += 1; + } + } + self.d = end; + Ok(()) + } +} + +/// Header represents the single varint that starts every Snappy compressed +/// block. +#[derive(Debug)] +struct Header { + /// The length of the header in bytes (i.e., the varint). + len: usize, + /// The length of the original decompressed input in bytes. + decompress_len: usize, +} + +impl Header { + /// Reads the varint header from the given input. + /// + /// If there was a problem reading the header then an error is returned. + /// If a header is returned then it is guaranteed to be valid. + #[inline(always)] + fn read(input: &[u8]) -> Result
{ + let (decompress_len, header_len) = bytes::read_varu64(input); + if header_len == 0 { + return Err(Error::Header); + } + if decompress_len > MAX_INPUT_SIZE { + return Err(Error::TooBig { + given: decompress_len as u64, + max: MAX_INPUT_SIZE, + }); + } + Ok(Header { len: header_len, decompress_len: decompress_len as usize }) + } +} + +/// A lookup table for quickly computing the various attributes derived from +/// a tag byte. The attributes are most useful for the three "copy" tags +/// and include the length of the copy, part of the offset (for copy 1-byte +/// only) and the total number of bytes proceding the tag byte that encode +/// the other part of the offset (1 for copy 1, 2 for copy 2 and 4 for copy 4). +/// +/// More specifically, the keys of the table are u8s and the values are u16s. +/// The bits of the values are laid out as follows: +/// +/// xxaa abbb xxcc cccc +/// +/// Where `a` is the number of bytes, `b` are the three bits of the offset +/// for copy 1 (the other 8 bits are in the byte proceding the tag byte; for +/// copy 2 and copy 4, `b = 0`), and `c` is the length of the copy (max of 64). +/// +/// We could pack this in fewer bits, but the position of the three `b` bits +/// lines up with the most significant three bits in the total offset for copy +/// 1, which avoids an extra shift instruction. +/// +/// In sum, this table is useful because it reduces branches and various +/// arithmetic operations. +struct TagLookupTable([u16; 256]); + +impl TagLookupTable { + /// Look up the tag entry given the tag `byte`. + #[inline(always)] + fn entry(&self, byte: u8) -> TagEntry { + TagEntry(self.0[byte as usize] as usize) + } +} + +/// Represents a single entry in the tag lookup table. +/// +/// See the documentation in `TagLookupTable` for the bit layout. +/// +/// The type is a `usize` for convenience. +struct TagEntry(usize); + +impl TagEntry { + /// Return the total number of bytes proceding this tag byte required to + /// encode the offset. + fn num_tag_bytes(&self) -> usize { + self.0 >> 11 + } + + /// Return the total copy length, capped at 255. + fn len(&self) -> usize { + self.0 & 0xFF + } + + /// Return the copy offset corresponding to this copy operation. `s` should + /// point to the position just after the tag byte that this entry was read + /// from. + /// + /// This requires reading from the compressed input since the offset is + /// encoded in bytes proceding the tag byte. + fn offset(&self, src: &[u8], s: usize) -> Result { + let num_tag_bytes = self.num_tag_bytes(); + let trailer = + // It is critical for this case to come first, since it is the + // fast path. We really hope that this case gets branch + // predicted. + if s + 4 <= src.len() { + unsafe { + // SAFETY: The conditional above guarantees that + // src[s..s+4] is valid to read from. + let p = src.as_ptr().add(s); + // We use WORD_MASK here to mask out the bits we don't + // need. While we're guaranteed to read 4 valid bytes, + // not all of those bytes are necessarily part of the + // offset. This is the key optimization: we don't need to + // branch on num_tag_bytes. + bytes::loadu_u32_le(p) as usize & WORD_MASK[num_tag_bytes] + } + } else if num_tag_bytes == 1 { + if s >= src.len() { + return Err(Error::CopyRead { + len: 1, + src_len: (src.len() - s) as u64, + }); + } + src[s] as usize + } else if num_tag_bytes == 2 { + if s + 1 >= src.len() { + return Err(Error::CopyRead { + len: 2, + src_len: (src.len() - s) as u64, + }); + } + bytes::read_u16_le(&src[s..]) as usize + } else { + return Err(Error::CopyRead { + len: num_tag_bytes as u64, + src_len: (src.len() - s) as u64, + }); + }; + Ok((self.0 & 0b0000_0111_0000_0000) | trailer) + } +} diff --git a/vendor/snap/src/error.rs b/vendor/snap/src/error.rs new file mode 100644 index 000000000..8f0b400a6 --- /dev/null +++ b/vendor/snap/src/error.rs @@ -0,0 +1,333 @@ +use std::fmt; +use std::io; +use std::result; + +/// A convenient type alias for `Result`. +pub type Result = result::Result; + +/// `IntoInnerError` occurs when consuming an encoder fails. +/// +/// Consuming the encoder causes a flush to happen. If the flush fails, then +/// this error is returned, which contains both the original encoder and the +/// error that occurred. +/// +/// The type parameter `W` is the unconsumed writer. +pub struct IntoInnerError { + wtr: W, + err: io::Error, +} + +impl IntoInnerError { + pub(crate) fn new(wtr: W, err: io::Error) -> IntoInnerError { + IntoInnerError { wtr, err } + } + + /// Returns the error which caused the call to `into_inner` to fail. + /// + /// This error was returned when attempting to flush the internal buffer. + pub fn error(&self) -> &io::Error { + &self.err + } + + /// Returns the underlying writer which generated the error. + /// + /// The returned value can be used for error recovery, such as + /// re-inspecting the buffer. + pub fn into_inner(self) -> W { + self.wtr + } +} + +impl std::error::Error for IntoInnerError {} + +impl fmt::Display for IntoInnerError { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + self.err.fmt(f) + } +} + +impl fmt::Debug for IntoInnerError { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + self.err.fmt(f) + } +} + +/// Error describes all the possible errors that may occur during Snappy +/// compression or decompression. +/// +/// Note that it's unlikely that you'll need to care about the specific error +/// reported since all of them indicate a corrupt Snappy data or a limitation +/// that cannot be worked around. Therefore, +/// `From for std::io::Error` is provided so that any Snappy +/// errors will be converted to a `std::io::Error` automatically when using +/// `try!`. +#[derive(Clone, Debug)] +pub enum Error { + /// This error occurs when the given input is too big. This can happen + /// during compression or decompression. + TooBig { + /// The size of the given input. + given: u64, + /// The maximum allowed size of an input buffer. + max: u64, + }, + /// This error occurs when the given buffer is too small to contain the + /// maximum possible compressed bytes or the total number of decompressed + /// bytes. + BufferTooSmall { + /// The size of the given output buffer. + given: u64, + /// The minimum size of the output buffer. + min: u64, + }, + /// This error occurs when trying to decompress a zero length buffer. + Empty, + /// This error occurs when an invalid header is found during decompression. + Header, + /// This error occurs when there is a mismatch between the number of + /// decompressed bytes reported in the header and the number of + /// actual decompressed bytes. In this error case, the number of actual + /// decompressed bytes is always less than the number reported in the + /// header. + HeaderMismatch { + /// The total number of decompressed bytes expected (i.e., the header + /// value). + expected_len: u64, + /// The total number of actual decompressed bytes. + got_len: u64, + }, + /// This error occurs during decompression when there was a problem + /// reading a literal. + Literal { + /// The expected length of the literal. + len: u64, + /// The number of remaining bytes in the compressed bytes. + src_len: u64, + /// The number of remaining slots in the decompression buffer. + dst_len: u64, + }, + /// This error occurs during decompression when there was a problem + /// reading a copy. + CopyRead { + /// The expected length of the copy (as encoded in the compressed + /// bytes). + len: u64, + /// The number of remaining bytes in the compressed bytes. + src_len: u64, + }, + /// This error occurs during decompression when there was a problem + /// writing a copy to the decompression buffer. + CopyWrite { + /// The length of the copy (i.e., the total number of bytes to be + /// produced by this copy in the decompression buffer). + len: u64, + /// The number of remaining bytes in the decompression buffer. + dst_len: u64, + }, + /// This error occurs during decompression when an invalid copy offset + /// is found. An offset is invalid if it is zero or if it is out of bounds. + Offset { + /// The offset that was read. + offset: u64, + /// The current position in the decompression buffer. If the offset is + /// non-zero, then the offset must be greater than this position. + dst_pos: u64, + }, + /// This error occurs when a stream header chunk type was expected but got + /// a different chunk type. + /// This error only occurs when reading a Snappy frame formatted stream. + StreamHeader { + /// The chunk type byte that was read. + byte: u8, + }, + /// This error occurs when the magic stream headers bytes do not match + /// what is expected. + /// This error only occurs when reading a Snappy frame formatted stream. + StreamHeaderMismatch { + /// The bytes that were read. + bytes: Vec, + }, + /// This error occurs when an unsupported chunk type is seen. + /// This error only occurs when reading a Snappy frame formatted stream. + UnsupportedChunkType { + /// The chunk type byte that was read. + byte: u8, + }, + /// This error occurs when trying to read a chunk with an unexpected or + /// incorrect length when reading a Snappy frame formatted stream. + /// This error only occurs when reading a Snappy frame formatted stream. + UnsupportedChunkLength { + /// The length of the chunk encountered. + len: u64, + /// True when this error occured while reading the stream header. + header: bool, + }, + /// This error occurs when a checksum validity check fails. + /// This error only occurs when reading a Snappy frame formatted stream. + Checksum { + /// The expected checksum read from the stream. + expected: u32, + /// The computed checksum. + got: u32, + }, +} + +impl From for io::Error { + fn from(err: Error) -> io::Error { + io::Error::new(io::ErrorKind::Other, err) + } +} + +impl Eq for Error {} + +impl PartialEq for Error { + fn eq(&self, other: &Error) -> bool { + use self::Error::*; + match (self, other) { + ( + &TooBig { given: given1, max: max1 }, + &TooBig { given: given2, max: max2 }, + ) => (given1, max1) == (given2, max2), + ( + &BufferTooSmall { given: given1, min: min1 }, + &BufferTooSmall { given: given2, min: min2 }, + ) => (given1, min1) == (given2, min2), + (&Empty, &Empty) | (&Header, &Header) => true, + ( + &HeaderMismatch { expected_len: elen1, got_len: glen1 }, + &HeaderMismatch { expected_len: elen2, got_len: glen2 }, + ) => (elen1, glen1) == (elen2, glen2), + ( + &Literal { len: len1, src_len: src_len1, dst_len: dst_len1 }, + &Literal { len: len2, src_len: src_len2, dst_len: dst_len2 }, + ) => (len1, src_len1, dst_len1) == (len2, src_len2, dst_len2), + ( + &CopyRead { len: len1, src_len: src_len1 }, + &CopyRead { len: len2, src_len: src_len2 }, + ) => (len1, src_len1) == (len2, src_len2), + ( + &CopyWrite { len: len1, dst_len: dst_len1 }, + &CopyWrite { len: len2, dst_len: dst_len2 }, + ) => (len1, dst_len1) == (len2, dst_len2), + ( + &Offset { offset: offset1, dst_pos: dst_pos1 }, + &Offset { offset: offset2, dst_pos: dst_pos2 }, + ) => (offset1, dst_pos1) == (offset2, dst_pos2), + (&StreamHeader { byte: byte1 }, &StreamHeader { byte: byte2 }) => { + byte1 == byte2 + } + ( + &StreamHeaderMismatch { bytes: ref bytes1 }, + &StreamHeaderMismatch { bytes: ref bytes2 }, + ) => bytes1 == bytes2, + ( + &UnsupportedChunkType { byte: byte1 }, + &UnsupportedChunkType { byte: byte2 }, + ) => byte1 == byte2, + ( + &UnsupportedChunkLength { len: len1, header: header1 }, + &UnsupportedChunkLength { len: len2, header: header2 }, + ) => (len1, header1) == (len2, header2), + ( + &Checksum { expected: e1, got: g1 }, + &Checksum { expected: e2, got: g2 }, + ) => (e1, g1) == (e2, g2), + _ => false, + } + } +} + +impl std::error::Error for Error {} + +impl fmt::Display for Error { + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result { + match *self { + Error::TooBig { given, max } => write!( + f, + "snappy: input buffer (size = {}) is larger than \ + allowed (size = {})", + given, max + ), + Error::BufferTooSmall { given, min } => write!( + f, + "snappy: output buffer (size = {}) is smaller than \ + required (size = {})", + given, min + ), + Error::Empty => write!(f, "snappy: corrupt input (empty)"), + Error::Header => { + write!(f, "snappy: corrupt input (invalid header)") + } + Error::HeaderMismatch { expected_len, got_len } => write!( + f, + "snappy: corrupt input (header mismatch; expected \ + {} decompressed bytes but got {})", + expected_len, got_len + ), + Error::Literal { len, src_len, dst_len } => write!( + f, + "snappy: corrupt input (expected literal read of \ + length {}; remaining src: {}; remaining dst: {})", + len, src_len, dst_len + ), + Error::CopyRead { len, src_len } => write!( + f, + "snappy: corrupt input (expected copy read of \ + length {}; remaining src: {})", + len, src_len + ), + Error::CopyWrite { len, dst_len } => write!( + f, + "snappy: corrupt input (expected copy write of \ + length {}; remaining dst: {})", + len, dst_len + ), + Error::Offset { offset, dst_pos } => write!( + f, + "snappy: corrupt input (expected valid offset but \ + got offset {}; dst position: {})", + offset, dst_pos + ), + Error::StreamHeader { byte } => write!( + f, + "snappy: corrupt input (expected stream header but \ + got unexpected chunk type byte {})", + byte + ), + Error::StreamHeaderMismatch { ref bytes } => write!( + f, + "snappy: corrupt input (expected sNaPpY stream \ + header but got {})", + escape(&**bytes) + ), + Error::UnsupportedChunkType { byte } => write!( + f, + "snappy: corrupt input (unsupported chunk type: {})", + byte + ), + Error::UnsupportedChunkLength { len, header: false } => write!( + f, + "snappy: corrupt input \ + (unsupported chunk length: {})", + len + ), + Error::UnsupportedChunkLength { len, header: true } => write!( + f, + "snappy: corrupt input \ + (invalid stream header length: {})", + len + ), + Error::Checksum { expected, got } => write!( + f, + "snappy: corrupt input (bad checksum; \ + expected: {}, got: {})", + expected, got + ), + } + } +} + +fn escape(bytes: &[u8]) -> String { + use std::ascii::escape_default; + bytes.iter().flat_map(|&b| escape_default(b)).map(|b| b as char).collect() +} diff --git a/vendor/snap/src/frame.rs b/vendor/snap/src/frame.rs new file mode 100644 index 000000000..3c56f9a88 --- /dev/null +++ b/vendor/snap/src/frame.rs @@ -0,0 +1,104 @@ +use crate::bytes; +use crate::compress::{max_compress_len, Encoder}; +use crate::crc32::CheckSummer; +use crate::error::Error; +use crate::MAX_BLOCK_SIZE; + +/// The maximum chunk of compressed bytes that can be processed at one time. +/// +/// This is computed via `max_compress_len(MAX_BLOCK_SIZE)`. +/// +/// TODO(ag): Replace with const fn once they support nominal branching. +pub const MAX_COMPRESS_BLOCK_SIZE: usize = 76490; + +/// The special magic string that starts any stream. +/// +/// This may appear more than once in a stream in order to support easy +/// concatenation of files compressed in the Snappy frame format. +pub const STREAM_IDENTIFIER: &'static [u8] = b"\xFF\x06\x00\x00sNaPpY"; + +/// The body of the special stream identifier. +pub const STREAM_BODY: &'static [u8] = b"sNaPpY"; + +/// The length of a snappy chunk type (1 byte), packet length (3 bytes) +/// and CRC field (4 bytes). This is technically the chunk header _plus_ +/// the CRC present in most chunks. +pub const CHUNK_HEADER_AND_CRC_SIZE: usize = 8; + +/// An enumeration describing each of the 4 main chunk types. +#[derive(Copy, Clone, Debug, Eq, PartialEq)] +pub enum ChunkType { + Stream = 0xFF, + Compressed = 0x00, + Uncompressed = 0x01, + Padding = 0xFE, +} + +impl ChunkType { + /// Converts a byte to one of the four defined chunk types represented by + /// a single byte. If the chunk type is reserved, then it is returned as + /// an Err. + pub fn from_u8(b: u8) -> Result { + match b { + 0xFF => Ok(ChunkType::Stream), + 0x00 => Ok(ChunkType::Compressed), + 0x01 => Ok(ChunkType::Uncompressed), + 0xFE => Ok(ChunkType::Padding), + b => Err(b), + } + } +} + +/// Compress a single frame (or decide to pass it through uncompressed). This +/// will output a frame header in `dst_chunk_header`, and it will return a slice +/// pointing to the data to use in the frame. The `dst_chunk_header` array must +/// always have a size of 8 bytes. +/// +/// If `always_use_dst` is set to false, the return value may point into either +/// `src` (for data we couldn't compress) or into `dst` (for data we could +/// compress). If `always_use_dst` is true, the data will always be in `dst`. +/// This is a bit weird, but because of Rust's ownership rules, it's easiest +/// for a single function to always be in charge of writing to `dst`. +pub fn compress_frame<'a>( + enc: &mut Encoder, + checksummer: CheckSummer, + src: &'a [u8], + dst_chunk_header: &mut [u8], + dst: &'a mut [u8], + always_use_dst: bool, +) -> Result<&'a [u8], Error> { + // This is a purely internal function, with a bunch of preconditions. + assert!(src.len() <= MAX_BLOCK_SIZE); + assert!(dst.len() >= max_compress_len(MAX_BLOCK_SIZE)); + assert_eq!(dst_chunk_header.len(), CHUNK_HEADER_AND_CRC_SIZE); + + // Build a checksum of our _uncompressed_ data. + let checksum = checksummer.crc32c_masked(src); + + // Compress the buffer. If compression sucked, throw it out and + // write uncompressed bytes instead. Since our buffer is at most + // MAX_BLOCK_SIZE and our dst buffer has size + // max_compress_len(MAX_BLOCK_SIZE), we have enough space. + let compress_len = enc.compress(src, dst)?; + let (chunk_type, chunk_len) = + // We add 4 to the chunk_len because of the checksum. + if compress_len >= src.len() - (src.len() / 8) { + (ChunkType::Uncompressed, 4 + src.len()) + } else { + (ChunkType::Compressed, 4 + compress_len) + }; + + dst_chunk_header[0] = chunk_type as u8; + bytes::write_u24_le(chunk_len as u32, &mut dst_chunk_header[1..]); + bytes::write_u32_le(checksum, &mut dst_chunk_header[4..]); + + // Return the data to put in our frame. + if chunk_type == ChunkType::Compressed { + Ok(&dst[0..compress_len]) + } else if always_use_dst { + dst[..src.len()].copy_from_slice(src); + Ok(&dst[..src.len()]) + } else { + Ok(src) + } +} diff --git a/vendor/snap/src/lib.rs b/vendor/snap/src/lib.rs new file mode 100644 index 000000000..231b04755 --- /dev/null +++ b/vendor/snap/src/lib.rs @@ -0,0 +1,109 @@ +/*! +This crate provides an implementation of the +[Snappy compression format](https://github.com/google/snappy/blob/master/format_description.txt), +as well as the +[framing format](https://github.com/google/snappy/blob/master/framing_format.txt). +The goal of Snappy is to provide reasonable compression at high speed. On a +modern CPU, Snappy can compress data at about 300 MB/sec or more and can +decompress data at about 800 MB/sec or more. + +# Install + +To use this crate with +[Cargo](https://doc.rust-lang.org/cargo/), +simply add it as a dependency to your `Cargo.toml`: + +```ignore +[dependencies] +snap = "1" +``` + +# Overview + +This crate provides two ways to use Snappy. The first way is through the +[`read::FrameDecoder`](read/struct.FrameDecoder.html) +and +[`write::FrameEncoder`](write/struct.FrameEncoder.html) +types, which implement the `std::io::Read` and `std::io::Write` traits with the +Snappy frame format. Unless you have a specific reason to the contrary, you +should only use the Snappy frame format. Specifically, the Snappy frame format +permits streaming compression or decompression. + +The second way is through the +[`raw::Decoder`](raw/struct.Decoder.html) +and +[`raw::Encoder`](raw/struct.Encoder.html) +types. These types provide lower level control to the raw Snappy format, and +don't support a streaming interface directly. You should only use these types +if you know you specifically need the Snappy raw format. + +Finally, the `Error` type in this crate provides an exhaustive list of error +conditions that are probably useless in most circumstances. Therefore, +`From for io::Error` is implemented in this crate, which will let +you automatically convert a Snappy error to an `std::io::Error` (when using +`?`) with an appropriate error message to display to an end user. + +# Example: compress data on `stdin` + +This program reads data from `stdin`, compresses it and emits it to `stdout`. +This example can be found in `examples/compress.rs`: + +```no_run +use std::io; + +fn main() { + let stdin = io::stdin(); + let stdout = io::stdout(); + + let mut rdr = stdin.lock(); + // Wrap the stdout writer in a Snappy writer. + let mut wtr = snap::write::FrameEncoder::new(stdout.lock()); + io::copy(&mut rdr, &mut wtr).expect("I/O operation failed"); +} +``` + +# Example: decompress data on `stdin` + +This program reads data from `stdin`, decompresses it and emits it to `stdout`. +This example can be found in `examples/decompress.rs`: + +```no_run +use std::io; + +fn main() { + let stdin = io::stdin(); + let stdout = io::stdout(); + + // Wrap the stdin reader in a Snappy reader. + let mut rdr = snap::read::FrameDecoder::new(stdin.lock()); + let mut wtr = stdout.lock(); + io::copy(&mut rdr, &mut wtr).expect("I/O operation failed"); +} +``` +*/ + +#![deny(missing_docs)] + +#[cfg(test)] +doc_comment::doctest!("../README.md"); + +pub use crate::error::{Error, Result}; + +/// We don't permit compressing a block bigger than what can fit in a u32. +const MAX_INPUT_SIZE: u64 = std::u32::MAX as u64; + +/// The maximum number of bytes that we process at once. A block is the unit +/// at which we scan for candidates for compression. +const MAX_BLOCK_SIZE: usize = 1 << 16; + +mod bytes; +mod compress; +mod crc32; +mod crc32_table; +mod decompress; +mod error; +mod frame; +pub mod raw; +pub mod read; +mod tag; +pub mod write; diff --git a/vendor/snap/src/raw.rs b/vendor/snap/src/raw.rs new file mode 100644 index 000000000..8b0eed263 --- /dev/null +++ b/vendor/snap/src/raw.rs @@ -0,0 +1,14 @@ +/*! +This module provides a raw Snappy encoder and decoder. + +A raw Snappy encoder/decoder can only compress/decompress a fixed amount of +data at a time. For this reason, this module is lower level and more difficult +to use than the higher level streaming readers and writers exposed as part of +the [`read`](../read/index.html) and [`write`](../write/index.html) modules. + +Generally, one only needs to use the raw format if some other source is +generating raw Snappy compressed data and you have no choice but to do the +same. Otherwise, the Snappy frame format should probably always be preferred. +*/ +pub use crate::compress::{max_compress_len, Encoder}; +pub use crate::decompress::{decompress_len, Decoder}; diff --git a/vendor/snap/src/read.rs b/vendor/snap/src/read.rs new file mode 100644 index 000000000..a924bf91d --- /dev/null +++ b/vendor/snap/src/read.rs @@ -0,0 +1,450 @@ +/*! +This module provides two `std::io::Read` implementations: + +* [`read::FrameDecoder`](struct.FrameDecoder.html) + wraps another `std::io::Read` implemenation, and decompresses data encoded + using the Snappy frame format. Use this if you have a compressed data source + and wish to read it as uncompressed data. +* [`read::FrameEncoder`](struct.FrameEncoder.html) + wraps another `std::io::Read` implemenation, and compresses data encoded + using the Snappy frame format. Use this if you have uncompressed data source + and wish to read it as compressed data. + +Typically, `read::FrameDecoder` is the version that you'll want. +*/ + +use std::cmp; +use std::fmt; +use std::io; + +use crate::bytes; +use crate::compress::Encoder; +use crate::crc32::CheckSummer; +use crate::decompress::{decompress_len, Decoder}; +use crate::error::Error; +use crate::frame::{ + compress_frame, ChunkType, CHUNK_HEADER_AND_CRC_SIZE, + MAX_COMPRESS_BLOCK_SIZE, STREAM_BODY, STREAM_IDENTIFIER, +}; +use crate::MAX_BLOCK_SIZE; + +/// The maximum size of a compressed block, including the header and stream +/// identifier, that can be emitted by FrameEncoder. +const MAX_READ_FRAME_ENCODER_BLOCK_SIZE: usize = STREAM_IDENTIFIER.len() + + CHUNK_HEADER_AND_CRC_SIZE + + MAX_COMPRESS_BLOCK_SIZE; + +/// A reader for decompressing a Snappy stream. +/// +/// This `FrameDecoder` wraps any other reader that implements `std::io::Read`. +/// Bytes read from this reader are decompressed using the +/// [Snappy frame format](https://github.com/google/snappy/blob/master/framing_format.txt) +/// (file extension `sz`, MIME type `application/x-snappy-framed`). +/// +/// This reader can potentially make many small reads from the underlying +/// stream depending on its format, therefore, passing in a buffered reader +/// may be beneficial. +pub struct FrameDecoder { + /// The underlying reader. + r: R, + /// A Snappy decoder that we reuse that does the actual block based + /// decompression. + dec: Decoder, + /// A CRC32 checksummer that is configured to either use the portable + /// fallback version or the SSE4.2 accelerated version when the right CPU + /// features are available. + checksummer: CheckSummer, + /// The compressed bytes buffer, taken from the underlying reader. + src: Vec, + /// The decompressed bytes buffer. Bytes are decompressed from src to dst + /// before being passed back to the caller. + dst: Vec, + /// Index into dst: starting point of bytes not yet given back to caller. + dsts: usize, + /// Index into dst: ending point of bytes not yet given back to caller. + dste: usize, + /// Whether we've read the special stream header or not. + read_stream_ident: bool, +} + +impl FrameDecoder { + /// Create a new reader for streaming Snappy decompression. + pub fn new(rdr: R) -> FrameDecoder { + FrameDecoder { + r: rdr, + dec: Decoder::new(), + checksummer: CheckSummer::new(), + src: vec![0; MAX_COMPRESS_BLOCK_SIZE], + dst: vec![0; MAX_BLOCK_SIZE], + dsts: 0, + dste: 0, + read_stream_ident: false, + } + } + + /// Gets a reference to the underlying reader in this decoder. + pub fn get_ref(&self) -> &R { + &self.r + } + + /// Gets a mutable reference to the underlying reader in this decoder. + /// + /// Note that mutation of the stream may result in surprising results if + /// this decoder is continued to be used. + pub fn get_mut(&mut self) -> &mut R { + &mut self.r + } +} + +impl io::Read for FrameDecoder { + fn read(&mut self, buf: &mut [u8]) -> io::Result { + macro_rules! fail { + ($err:expr) => { + return Err(io::Error::from($err)) + }; + } + loop { + if self.dsts < self.dste { + let len = cmp::min(self.dste - self.dsts, buf.len()); + let dste = self.dsts.checked_add(len).unwrap(); + buf[0..len].copy_from_slice(&self.dst[self.dsts..dste]); + self.dsts = dste; + return Ok(len); + } + if !read_exact_eof(&mut self.r, &mut self.src[0..4])? { + return Ok(0); + } + let ty = ChunkType::from_u8(self.src[0]); + if !self.read_stream_ident { + if ty != Ok(ChunkType::Stream) { + fail!(Error::StreamHeader { byte: self.src[0] }); + } + self.read_stream_ident = true; + } + let len64 = bytes::read_u24_le(&self.src[1..]) as u64; + if len64 > self.src.len() as u64 { + fail!(Error::UnsupportedChunkLength { + len: len64, + header: false, + }); + } + let len = len64 as usize; + match ty { + Err(b) if 0x02 <= b && b <= 0x7F => { + // Spec says that chunk types 0x02-0x7F are reserved and + // conformant decoders must return an error. + fail!(Error::UnsupportedChunkType { byte: b }); + } + Err(b) if 0x80 <= b && b <= 0xFD => { + // Spec says that chunk types 0x80-0xFD are reserved but + // skippable. + self.r.read_exact(&mut self.src[0..len])?; + } + Err(b) => { + // Can never happen. 0x02-0x7F and 0x80-0xFD are handled + // above in the error case. That leaves 0x00, 0x01, 0xFE + // and 0xFF, each of which correspond to one of the four + // defined chunk types. + unreachable!("BUG: unhandled chunk type: {}", b); + } + Ok(ChunkType::Padding) => { + // Just read and move on. + self.r.read_exact(&mut self.src[0..len])?; + } + Ok(ChunkType::Stream) => { + if len != STREAM_BODY.len() { + fail!(Error::UnsupportedChunkLength { + len: len64, + header: true, + }) + } + self.r.read_exact(&mut self.src[0..len])?; + if &self.src[0..len] != STREAM_BODY { + fail!(Error::StreamHeaderMismatch { + bytes: self.src[0..len].to_vec(), + }); + } + } + Ok(ChunkType::Uncompressed) => { + if len < 4 { + fail!(Error::UnsupportedChunkLength { + len: len as u64, + header: false, + }); + } + let expected_sum = bytes::io_read_u32_le(&mut self.r)?; + let n = len - 4; + if n > self.dst.len() { + fail!(Error::UnsupportedChunkLength { + len: n as u64, + header: false, + }); + } + self.r.read_exact(&mut self.dst[0..n])?; + let got_sum = + self.checksummer.crc32c_masked(&self.dst[0..n]); + if expected_sum != got_sum { + fail!(Error::Checksum { + expected: expected_sum, + got: got_sum, + }); + } + self.dsts = 0; + self.dste = n; + } + Ok(ChunkType::Compressed) => { + if len < 4 { + fail!(Error::UnsupportedChunkLength { + len: len as u64, + header: false, + }); + } + let expected_sum = bytes::io_read_u32_le(&mut self.r)?; + let sn = len - 4; + if sn > self.src.len() { + fail!(Error::UnsupportedChunkLength { + len: len64, + header: false, + }); + } + self.r.read_exact(&mut self.src[0..sn])?; + let dn = decompress_len(&self.src)?; + if dn > self.dst.len() { + fail!(Error::UnsupportedChunkLength { + len: dn as u64, + header: false, + }); + } + self.dec + .decompress(&self.src[0..sn], &mut self.dst[0..dn])?; + let got_sum = + self.checksummer.crc32c_masked(&self.dst[0..dn]); + if expected_sum != got_sum { + fail!(Error::Checksum { + expected: expected_sum, + got: got_sum, + }); + } + self.dsts = 0; + self.dste = dn; + } + } + } + } +} + +impl fmt::Debug for FrameDecoder { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("FrameDecoder") + .field("r", &self.r) + .field("dec", &self.dec) + .field("checksummer", &self.checksummer) + .field("src", &"[...]") + .field("dst", &"[...]") + .field("dsts", &self.dsts) + .field("dste", &self.dste) + .field("read_stream_ident", &self.read_stream_ident) + .finish() + } +} + +/// A reader for compressing data using snappy as it is read. +/// +/// This `FrameEncoder` wraps any other reader that implements `std::io::Read`. +/// Bytes read from this reader are compressed using the +/// [Snappy frame format](https://github.com/google/snappy/blob/master/framing_format.txt) +/// (file extension `sz`, MIME type `application/x-snappy-framed`). +/// +/// Usually you'll want +/// [`read::FrameDecoder`](struct.FrameDecoder.html) +/// (for decompressing while reading) or +/// [`write::FrameEncoder`](../write/struct.FrameEncoder.html) +/// (for compressing while writing) instead. +/// +/// Unlike `FrameDecoder`, this will attempt to make large reads roughly +/// equivalent to the size of a single Snappy block. Therefore, callers may not +/// benefit from using a buffered reader. +pub struct FrameEncoder { + /// Internally, we split `FrameEncoder` in two to keep the borrow checker + /// happy. The `inner` member contains everything that `read_frame` needs + /// to fetch a frame's worth of data and compress it. + inner: Inner, + /// Data that we've encoded and are ready to return to our caller. + dst: Vec, + /// Starting point of bytes in `dst` not yet given back to the caller. + dsts: usize, + /// Ending point of bytes in `dst` that we want to give to our caller. + dste: usize, +} + +struct Inner { + /// The underlying data source. + r: R, + /// An encoder that we reuse that does the actual block based compression. + enc: Encoder, + /// A CRC32 checksummer that is configured to either use the portable + /// fallback version or the SSE4.2 accelerated version when the right CPU + /// features are available. + checksummer: CheckSummer, + /// Data taken from the underlying `r`, and not yet compressed. + src: Vec, + /// Have we written the standard snappy header to `dst` yet? + wrote_stream_ident: bool, +} + +impl FrameEncoder { + /// Create a new reader for streaming Snappy compression. + pub fn new(rdr: R) -> FrameEncoder { + FrameEncoder { + inner: Inner { + r: rdr, + enc: Encoder::new(), + checksummer: CheckSummer::new(), + src: vec![0; MAX_BLOCK_SIZE], + wrote_stream_ident: false, + }, + dst: vec![0; MAX_READ_FRAME_ENCODER_BLOCK_SIZE], + dsts: 0, + dste: 0, + } + } + + /// Gets a reference to the underlying reader in this decoder. + pub fn get_ref(&self) -> &R { + &self.inner.r + } + + /// Gets a mutable reference to the underlying reader in this decoder. + /// + /// Note that mutation of the stream may result in surprising results if + /// this encoder is continued to be used. + pub fn get_mut(&mut self) -> &mut R { + &mut self.inner.r + } + + /// Read previously compressed data from `self.dst`, returning the number of + /// bytes read. If `self.dst` is empty, returns 0. + fn read_from_dst(&mut self, buf: &mut [u8]) -> usize { + let available_bytes = self.dste - self.dsts; + let count = cmp::min(available_bytes, buf.len()); + buf[..count].copy_from_slice(&self.dst[self.dsts..self.dsts + count]); + self.dsts += count; + count + } +} + +impl io::Read for FrameEncoder { + fn read(&mut self, buf: &mut [u8]) -> io::Result { + // Try reading previously compressed bytes from our `dst` buffer, if + // any. + let count = self.read_from_dst(buf); + + if count > 0 { + // We had some bytes in our `dst` buffer that we used. + Ok(count) + } else if buf.len() >= MAX_READ_FRAME_ENCODER_BLOCK_SIZE { + // Our output `buf` is big enough that we can directly write into + // it, so bypass `dst` entirely. + self.inner.read_frame(buf) + } else { + // We need to refill `self.dst`, and then return some bytes from + // that. + let count = self.inner.read_frame(&mut self.dst)?; + self.dsts = 0; + self.dste = count; + Ok(self.read_from_dst(buf)) + } + } +} + +impl Inner { + /// Read from `self.r`, and create a new frame, writing it to `dst`, which + /// must be at least `MAX_READ_FRAME_ENCODER_BLOCK_SIZE` bytes in size. + fn read_frame(&mut self, dst: &mut [u8]) -> io::Result { + debug_assert!(dst.len() >= MAX_READ_FRAME_ENCODER_BLOCK_SIZE); + + // We make one read to the underlying reader. If the underlying reader + // doesn't fill the buffer but there are still bytes to be read, then + // compression won't be optimal. The alternative would be to block + // until our buffer is maximally full (or we see EOF), but this seems + // more surprising. In general, io::Read implementations should try to + // fill the caller's buffer as much as they can, so this seems like the + // better choice. + let nread = self.r.read(&mut self.src)?; + if nread == 0 { + return Ok(0); + } + + // If we haven't yet written the stream header to `dst`, write it. + let mut dst_write_start = 0; + if !self.wrote_stream_ident { + dst[0..STREAM_IDENTIFIER.len()].copy_from_slice(STREAM_IDENTIFIER); + dst_write_start += STREAM_IDENTIFIER.len(); + self.wrote_stream_ident = true; + } + + // Reserve space for our chunk header. We need to use `split_at_mut` so + // that we can get two mutable slices pointing at non-overlapping parts + // of `dst`. + let (chunk_header, remaining_dst) = + dst[dst_write_start..].split_at_mut(CHUNK_HEADER_AND_CRC_SIZE); + dst_write_start += CHUNK_HEADER_AND_CRC_SIZE; + + // Compress our frame if possible, telling `compress_frame` to always + // put the output in `dst`. + let frame_data = compress_frame( + &mut self.enc, + self.checksummer, + &self.src[..nread], + chunk_header, + remaining_dst, + true, + )?; + Ok(dst_write_start + frame_data.len()) + } +} + +impl fmt::Debug for FrameEncoder { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("FrameEncoder") + .field("inner", &self.inner) + .field("dst", &"[...]") + .field("dsts", &self.dsts) + .field("dste", &self.dste) + .finish() + } +} + +impl fmt::Debug for Inner { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("Inner") + .field("r", &self.r) + .field("enc", &self.enc) + .field("checksummer", &self.checksummer) + .field("src", &"[...]") + .field("wrote_stream_ident", &self.wrote_stream_ident) + .finish() + } +} + +// read_exact_eof is like Read::read_exact, except it detects EOF +// and returns Ok(false) instead of an error. +// +// If buf was read successfully, it returns Ok(true). +fn read_exact_eof( + rdr: &mut R, + buf: &mut [u8], +) -> io::Result { + match rdr.read(buf) { + // EOF + Ok(0) => Ok(false), + // Read everything w/ the read call + Ok(i) if i == buf.len() => Ok(true), + // There's some bytes left to fill, which can be deferred to read_exact + Ok(i) => { + rdr.read_exact(&mut buf[i..])?; + Ok(true) + } + Err(e) => Err(e), + } +} diff --git a/vendor/snap/src/tag.rs b/vendor/snap/src/tag.rs new file mode 100644 index 000000000..6344a13fc --- /dev/null +++ b/vendor/snap/src/tag.rs @@ -0,0 +1,2 @@ +// Generated by build.rs. +include!(concat!(env!("OUT_DIR"), "/tag.rs")); diff --git a/vendor/snap/src/varint.rs b/vendor/snap/src/varint.rs new file mode 100644 index 000000000..d4a11384f --- /dev/null +++ b/vendor/snap/src/varint.rs @@ -0,0 +1,31 @@ +/// https://developers.google.com/protocol-buffers/docs/encoding#varints +pub fn write_varu64(data: &mut [u8], mut n: u64) -> usize { + let mut i = 0; + while n >= 0b1000_0000 { + data[i] = (n as u8) | 0b1000_0000; + n >>= 7; + i += 1; + } + data[i] = n as u8; + i + 1 +} + +/// https://developers.google.com/protocol-buffers/docs/encoding#varints +pub fn read_varu64(data: &[u8]) -> (u64, usize) { + let mut n: u64 = 0; + let mut shift: u32 = 0; + for (i, &b) in data.iter().enumerate() { + if b < 0b1000_0000 { + return match (b as u64).checked_shl(shift) { + None => (0, 0), + Some(b) => (n | b, i + 1), + }; + } + match ((b as u64) & 0b0111_1111).checked_shl(shift) { + None => return (0, 0), + Some(b) => n |= b, + } + shift += 7; + } + (0, 0) +} diff --git a/vendor/snap/src/write.rs b/vendor/snap/src/write.rs new file mode 100644 index 000000000..7975bd18e --- /dev/null +++ b/vendor/snap/src/write.rs @@ -0,0 +1,215 @@ +/*! +This module provides a `std::io::Write` implementation: + +- `write::FrameEncoder` wraps another `std::io::Write` implemenation, and + compresses data encoded using the Snappy frame format. Use this if you have + uncompressed data source and wish to write it as compressed data. + +It would also be possible to provide a `write::FrameDecoder`, which decompresses +data as it writes it, but it hasn't been implemented yet. +*/ + +use std::fmt; +use std::io::{self, Write}; + +use crate::compress::Encoder; +use crate::crc32::CheckSummer; +pub use crate::error::IntoInnerError; +use crate::frame::{ + compress_frame, CHUNK_HEADER_AND_CRC_SIZE, MAX_COMPRESS_BLOCK_SIZE, + STREAM_IDENTIFIER, +}; +use crate::MAX_BLOCK_SIZE; + +/// A writer for compressing a Snappy stream. +/// +/// This `FrameEncoder` wraps any other writer that implements `io::Write`. +/// Bytes written to this writer are compressed using the [Snappy frame +/// format](https://github.com/google/snappy/blob/master/framing_format.txt) +/// (file extension `sz`, MIME type `application/x-snappy-framed`). +/// +/// Writes are buffered automatically, so there's no need to wrap the given +/// writer in a `std::io::BufWriter`. +/// +/// The writer will be flushed automatically when it is dropped. If an error +/// occurs, it is ignored. +pub struct FrameEncoder { + /// Our main internal state, split out for borrowck reasons (happily paid). + /// + /// Also, it's an `Option` so we can move out of it even though + /// `FrameEncoder` impls `Drop`. + inner: Option>, + /// Our buffer of uncompressed bytes. This isn't part of `inner` because + /// we may write bytes directly from the caller if the given buffer was + /// big enough. As a result, the main `write` implementation needs to + /// accept either the internal buffer or the caller's bytes directly. Since + /// `write` requires a mutable borrow, we satisfy the borrow checker by + /// separating `src` from the rest of the state. + src: Vec, +} + +struct Inner { + /// The underlying writer. + w: W, + /// An encoder that we reuse that does the actual block based compression. + enc: Encoder, + /// A CRC32 checksummer that is configured to either use the portable + /// fallback version or the SSE4.2 accelerated version when the right CPU + /// features are available. + checksummer: CheckSummer, + /// The compressed bytes buffer. Bytes are compressed from src (usually) + /// to dst before being written to w. + dst: Vec, + /// When false, the stream identifier (with magic bytes) must precede the + /// next write. + wrote_stream_ident: bool, + /// Space for writing the header of a chunk before writing it to the + /// underlying writer. + chunk_header: [u8; 8], +} + +impl FrameEncoder { + /// Create a new writer for streaming Snappy compression. + pub fn new(wtr: W) -> FrameEncoder { + FrameEncoder { + inner: Some(Inner { + w: wtr, + enc: Encoder::new(), + checksummer: CheckSummer::new(), + dst: vec![0; MAX_COMPRESS_BLOCK_SIZE], + wrote_stream_ident: false, + chunk_header: [0; CHUNK_HEADER_AND_CRC_SIZE], + }), + src: Vec::with_capacity(MAX_BLOCK_SIZE), + } + } + + /// Returns the underlying stream, consuming and flushing this writer. + /// + /// If flushing the writer caused an error, then an `IntoInnerError` is + /// returned, which contains both the writer and the original writer. + pub fn into_inner(mut self) -> Result>> { + match self.flush() { + Ok(()) => Ok(self.inner.take().unwrap().w), + Err(err) => Err(IntoInnerError::new(self, err)), + } + } + + /// Gets a reference to the underlying writer in this encoder. + pub fn get_ref(&self) -> &W { + &self.inner.as_ref().unwrap().w + } + + /// Gets a reference to the underlying writer in this encoder. + /// + /// Note that mutating the output/input state of the stream may corrupt + /// this encoder, so care must be taken when using this method. + pub fn get_mut(&mut self) -> &mut W { + &mut self.inner.as_mut().unwrap().w + } +} + +impl Drop for FrameEncoder { + fn drop(&mut self) { + if self.inner.is_some() { + // Ignore errors because we can't conceivably return an error and + // panicing in a dtor is bad juju. + let _ = self.flush(); + } + } +} + +impl io::Write for FrameEncoder { + fn write(&mut self, mut buf: &[u8]) -> io::Result { + let mut total = 0; + // If there isn't enough room to add buf to src, then add only a piece + // of it, flush it and mush on. + loop { + let free = self.src.capacity() - self.src.len(); + // n is the number of bytes extracted from buf. + let n = if buf.len() <= free { + break; + } else if self.src.is_empty() { + // If buf is bigger than our entire buffer then avoid + // the indirection and write the buffer directly. + self.inner.as_mut().unwrap().write(buf)? + } else { + self.src.extend_from_slice(&buf[0..free]); + self.flush()?; + free + }; + buf = &buf[n..]; + total += n; + } + // We're only here if buf.len() will fit within the available space of + // self.src. + debug_assert!(buf.len() <= (self.src.capacity() - self.src.len())); + self.src.extend_from_slice(buf); + total += buf.len(); + // We should never expand or contract self.src. + debug_assert!(self.src.capacity() == MAX_BLOCK_SIZE); + Ok(total) + } + + fn flush(&mut self) -> io::Result<()> { + if self.src.is_empty() { + return Ok(()); + } + self.inner.as_mut().unwrap().write(&self.src)?; + self.src.truncate(0); + Ok(()) + } +} + +impl Inner { + fn write(&mut self, mut buf: &[u8]) -> io::Result { + let mut total = 0; + if !self.wrote_stream_ident { + self.wrote_stream_ident = true; + self.w.write_all(STREAM_IDENTIFIER)?; + } + while !buf.is_empty() { + // Advance buf and get our block. + let mut src = buf; + if src.len() > MAX_BLOCK_SIZE { + src = &src[0..MAX_BLOCK_SIZE]; + } + buf = &buf[src.len()..]; + + let frame_data = compress_frame( + &mut self.enc, + self.checksummer, + src, + &mut self.chunk_header, + &mut self.dst, + false, + )?; + self.w.write_all(&self.chunk_header)?; + self.w.write_all(frame_data)?; + total += src.len(); + } + Ok(total) + } +} + +impl fmt::Debug for FrameEncoder { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("FrameEncoder") + .field("inner", &self.inner) + .field("src", &"[...]") + .finish() + } +} + +impl fmt::Debug for Inner { + fn fmt(&self, f: &mut fmt::Formatter) -> fmt::Result { + f.debug_struct("Inner") + .field("w", &self.w) + .field("enc", &self.enc) + .field("checksummer", &self.checksummer) + .field("dst", &"[...]") + .field("wrote_stream_ident", &self.wrote_stream_ident) + .field("chunk_header", &self.chunk_header) + .finish() + } +} -- cgit v1.2.3