From 20431706a863f92cb37dc512fef6e48d192aaf2c Mon Sep 17 00:00:00 2001 From: Daniel Baumann Date: Wed, 17 Apr 2024 14:11:38 +0200 Subject: Merging upstream version 1.66.0+dfsg1. Signed-off-by: Daniel Baumann --- vendor/tracing-subscriber-0.3.3/src/layer/mod.rs | 1285 ++++++++++++++++++++++ 1 file changed, 1285 insertions(+) create mode 100644 vendor/tracing-subscriber-0.3.3/src/layer/mod.rs (limited to 'vendor/tracing-subscriber-0.3.3/src/layer/mod.rs') diff --git a/vendor/tracing-subscriber-0.3.3/src/layer/mod.rs b/vendor/tracing-subscriber-0.3.3/src/layer/mod.rs new file mode 100644 index 000000000..f3f994490 --- /dev/null +++ b/vendor/tracing-subscriber-0.3.3/src/layer/mod.rs @@ -0,0 +1,1285 @@ +//! The [`Layer`] trait, a composable abstraction for building [`Subscriber`]s. +//! +//! The [`Subscriber`] trait in `tracing-core` represents the _complete_ set of +//! functionality required to consume `tracing` instrumentation. This means that +//! a single `Subscriber` instance is a self-contained implementation of a +//! complete strategy for collecting traces; but it _also_ means that the +//! `Subscriber` trait cannot easily be composed with other `Subscriber`s. +//! +//! In particular, [`Subscriber`]s are responsible for generating [span IDs] and +//! assigning them to spans. Since these IDs must uniquely identify a span +//! within the context of the current trace, this means that there may only be +//! a single `Subscriber` for a given thread at any point in time — +//! otherwise, there would be no authoritative source of span IDs. +//! +//! On the other hand, the majority of the [`Subscriber`] trait's functionality +//! is composable: any number of subscribers may _observe_ events, span entry +//! and exit, and so on, provided that there is a single authoritative source of +//! span IDs. The [`Layer`] trait represents this composable subset of the +//! [`Subscriber`] behavior; it can _observe_ events and spans, but does not +//! assign IDs. +//! +//! ## Composing Layers +//! +//! Since a [`Layer`] does not implement a complete strategy for collecting +//! traces, it must be composed with a `Subscriber` in order to be used. The +//! [`Layer`] trait is generic over a type parameter (called `S` in the trait +//! definition), representing the types of `Subscriber` they can be composed +//! with. Thus, a [`Layer`] may be implemented that will only compose with a +//! particular `Subscriber` implementation, or additional trait bounds may be +//! added to constrain what types implementing `Subscriber` a `Layer` can wrap. +//! +//! `Layer`s may be added to a `Subscriber` by using the [`SubscriberExt::with`] +//! method, which is provided by `tracing-subscriber`'s [prelude]. This method +//! returns a [`Layered`] struct that implements `Subscriber` by composing the +//! `Layer` with the `Subscriber`. +//! +//! For example: +//! ```rust +//! use tracing_subscriber::Layer; +//! use tracing_subscriber::prelude::*; +//! use tracing::Subscriber; +//! +//! pub struct MyLayer { +//! // ... +//! } +//! +//! impl Layer for MyLayer { +//! // ... +//! } +//! +//! pub struct MySubscriber { +//! // ... +//! } +//! +//! # use tracing_core::{span::{Id, Attributes, Record}, Metadata, Event}; +//! impl Subscriber for MySubscriber { +//! // ... +//! # fn new_span(&self, _: &Attributes) -> Id { Id::from_u64(1) } +//! # fn record(&self, _: &Id, _: &Record) {} +//! # fn event(&self, _: &Event) {} +//! # fn record_follows_from(&self, _: &Id, _: &Id) {} +//! # fn enabled(&self, _: &Metadata) -> bool { false } +//! # fn enter(&self, _: &Id) {} +//! # fn exit(&self, _: &Id) {} +//! } +//! # impl MyLayer { +//! # fn new() -> Self { Self {} } +//! # } +//! # impl MySubscriber { +//! # fn new() -> Self { Self { }} +//! # } +//! +//! let subscriber = MySubscriber::new() +//! .with(MyLayer::new()); +//! +//! tracing::subscriber::set_global_default(subscriber); +//! ``` +//! +//! Multiple `Layer`s may be composed in the same manner: +//! ```rust +//! # use tracing_subscriber::{Layer, layer::SubscriberExt}; +//! # use tracing::Subscriber; +//! pub struct MyOtherLayer { +//! // ... +//! } +//! +//! impl Layer for MyOtherLayer { +//! // ... +//! } +//! +//! pub struct MyThirdLayer { +//! // ... +//! } +//! +//! impl Layer for MyThirdLayer { +//! // ... +//! } +//! # pub struct MyLayer {} +//! # impl Layer for MyLayer {} +//! # pub struct MySubscriber { } +//! # use tracing_core::{span::{Id, Attributes, Record}, Metadata, Event}; +//! # impl Subscriber for MySubscriber { +//! # fn new_span(&self, _: &Attributes) -> Id { Id::from_u64(1) } +//! # fn record(&self, _: &Id, _: &Record) {} +//! # fn event(&self, _: &Event) {} +//! # fn record_follows_from(&self, _: &Id, _: &Id) {} +//! # fn enabled(&self, _: &Metadata) -> bool { false } +//! # fn enter(&self, _: &Id) {} +//! # fn exit(&self, _: &Id) {} +//! } +//! # impl MyLayer { +//! # fn new() -> Self { Self {} } +//! # } +//! # impl MyOtherLayer { +//! # fn new() -> Self { Self {} } +//! # } +//! # impl MyThirdLayer { +//! # fn new() -> Self { Self {} } +//! # } +//! # impl MySubscriber { +//! # fn new() -> Self { Self { }} +//! # } +//! +//! let subscriber = MySubscriber::new() +//! .with(MyLayer::new()) +//! .with(MyOtherLayer::new()) +//! .with(MyThirdLayer::new()); +//! +//! tracing::subscriber::set_global_default(subscriber); +//! ``` +//! +//! The [`Layer::with_subscriber`] constructs the [`Layered`] type from a +//! [`Layer`] and [`Subscriber`], and is called by [`SubscriberExt::with`]. In +//! general, it is more idiomatic to use [`SubscriberExt::with`], and treat +//! [`Layer::with_subscriber`] as an implementation detail, as `with_subscriber` +//! calls must be nested, leading to less clear code for the reader. +//! +//! [prelude]: crate::prelude +//! +//! ## Recording Traces +//! +//! The [`Layer`] trait defines a set of methods for consuming notifications from +//! tracing instrumentation, which are generally equivalent to the similarly +//! named methods on [`Subscriber`]. Unlike [`Subscriber`], the methods on +//! `Layer` are additionally passed a [`Context`] type, which exposes additional +//! information provided by the wrapped subscriber (such as [the current span]) +//! to the layer. +//! +//! ## Filtering with `Layer`s +//! +//! As well as strategies for handling trace events, the `Layer` trait may also +//! be used to represent composable _filters_. This allows the determination of +//! what spans and events should be recorded to be decoupled from _how_ they are +//! recorded: a filtering layer can be applied to other layers or +//! subscribers. `Layer`s can be used to implement _global filtering_, where a +//! `Layer` provides a filtering strategy for the entire subscriber. +//! Additionally, individual recording `Layer`s or sets of `Layer`s may be +//! combined with _per-layer filters_ that control what spans and events are +//! recorded by those layers. +//! +//! ### Global Filtering +//! +//! A `Layer` that implements a filtering strategy should override the +//! [`register_callsite`] and/or [`enabled`] methods. It may also choose to implement +//! methods such as [`on_enter`], if it wishes to filter trace events based on +//! the current span context. +//! +//! Note that the [`Layer::register_callsite`] and [`Layer::enabled`] methods +//! determine whether a span or event is enabled *globally*. Thus, they should +//! **not** be used to indicate whether an individual layer wishes to record a +//! particular span or event. Instead, if a layer is only interested in a subset +//! of trace data, but does *not* wish to disable other spans and events for the +//! rest of the layer stack should ignore those spans and events in its +//! notification methods. +//! +//! The filtering methods on a stack of `Layer`s are evaluated in a top-down +//! order, starting with the outermost `Layer` and ending with the wrapped +//! [`Subscriber`]. If any layer returns `false` from its [`enabled`] method, or +//! [`Interest::never()`] from its [`register_callsite`] method, filter +//! evaluation will short-circuit and the span or event will be disabled. +//! +//! ### Per-Layer Filtering +//! +//! **Note**: per-layer filtering APIs currently require the [`"registry"` crate +//! feature flag][feat] to be enabled. +//! +//! Sometimes, it may be desirable for one `Layer` to record a particular subset +//! of spans and events, while a different subset of spans and events are +//! recorded by other `Layer`s. For example: +//! +//! - A layer that records metrics may wish to observe only events including +//! particular tracked values, while a logging layer ignores those events. +//! - If recording a distributed trace is expensive, it might be desirable to +//! only send spans with `INFO` and lower verbosity to the distributed tracing +//! system, while logging more verbose spans to a file. +//! - Spans and events with a particular target might be recorded differently +//! from others, such as by generating an HTTP access log from a span that +//! tracks the lifetime of an HTTP request. +//! +//! The [`Filter`] trait is used to control what spans and events are +//! observed by an individual `Layer`, while still allowing other `Layer`s to +//! potentially record them. The [`Layer::with_filter`] method combines a +//! `Layer` with a [`Filter`], returning a [`Filtered`] layer. +//! +//! This crate's [`filter`] module provides a number of types which implement +//! the [`Filter`] trait, such as [`LevelFilter`], [`Targets`], and +//! [`FilterFn`]. These [`Filter`]s provide ready-made implementations of +//! common forms of filtering. For custom filtering policies, the [`FilterFn`] +//! and [`DynFilterFn`] types allow implementing a [`Filter`] with a closure or +//! function pointer. In addition, when more control is required, the [`Filter`] +//! trait may also be implemented for user-defined types. +//! +//! 
+//!     Warning: Currently, the 
+//!     Registry type defined in this crate is the only root
+//!     Subscriber capable of supporting Layers with
+//!     per-layer filters. In the future, new APIs will be added to allow other
+//!     root Subscribers to support per-layer filters.
+//!
+//! +//! For example, to generate an HTTP access log based on spans with +//! the `http_access` target, while logging other spans and events to +//! standard out, a [`Filter`] can be added to the access log layer: +//! +//! ``` +//! use tracing_subscriber::{filter, prelude::*}; +//! +//! // Generates an HTTP access log. +//! let access_log = // ... +//! # filter::LevelFilter::INFO; +//! +//! // Add a filter to the access log layer so that it only observes +//! // spans and events with the `http_access` target. +//! let access_log = access_log.with_filter(filter::filter_fn(|metadata| { +//! // Returns `true` if and only if the span or event's target is +//! // "http_access". +//! metadata.target() == "http_access" +//! })); +//! +//! // A general-purpose logging layer. +//! let fmt_layer = tracing_subscriber::fmt::layer(); +//! +//! // Build a subscriber that combines the access log and stdout log +//! // layers. +//! tracing_subscriber::registry() +//! .with(fmt_layer) +//! .with(access_log) +//! .init(); +//! ``` +//! +//! Multiple layers can have their own, separate per-layer filters. A span or +//! event will be recorded if it is enabled by _any_ per-layer filter, but it +//! will be skipped by the layers whose filters did not enable it. Building on +//! the previous example: +//! +//! ``` +//! use tracing_subscriber::{filter::{filter_fn, LevelFilter}, prelude::*}; +//! +//! let access_log = // ... +//! # LevelFilter::INFO; +//! let fmt_layer = tracing_subscriber::fmt::layer(); +//! +//! tracing_subscriber::registry() +//! // Add the filter for the "http_access" target to the access +//! // log layer, like before. +//! .with(access_log.with_filter(filter_fn(|metadata| { +//! metadata.target() == "http_access" +//! }))) +//! // Add a filter for spans and events with the INFO level +//! // and below to the logging layer. +//! .with(fmt_layer.with_filter(LevelFilter::INFO)) +//! .init(); +//! +//! // Neither layer will observe this event +//! tracing::debug!(does_anyone_care = false, "a tree fell in the forest"); +//! +//! // This event will be observed by the logging layer, but not +//! // by the access log layer. +//! tracing::warn!(dose_roentgen = %3.8, "not great, but not terrible"); +//! +//! // This event will be observed only by the access log layer. +//! tracing::trace!(target: "http_access", "HTTP request started"); +//! +//! // Both layers will observe this event. +//! tracing::error!(target: "http_access", "HTTP request failed with a very bad error!"); +//! ``` +//! +//! A per-layer filter can be applied to multiple [`Layer`]s at a time, by +//! combining them into a [`Layered`] layer using [`Layer::and_then`], and then +//! calling [`Layer::with_filter`] on the resulting [`Layered`] layer. +//! +//! Consider the following: +//! - `layer_a` and `layer_b`, which should only receive spans and events at +//! the [`INFO`] [level] and above. +//! - A third layer, `layer_c`, which should receive spans and events at +//! the [`DEBUG`] [level] as well. +//! The layers and filters would be composed thusly: +//! +//! ``` +//! use tracing_subscriber::{filter::LevelFilter, prelude::*}; +//! +//! let layer_a = // ... +//! # LevelFilter::INFO; +//! let layer_b = // ... +//! # LevelFilter::INFO; +//! let layer_c = // ... +//! # LevelFilter::INFO; +//! +//! let info_layers = layer_a +//! // Combine `layer_a` and `layer_b` into a `Layered` layer: +//! .and_then(layer_b) +//! // ...and then add an `INFO` `LevelFilter` to that layer: +//! .with_filter(LevelFilter::INFO); +//! +//! tracing_subscriber::registry() +//! // Add `layer_c` with a `DEBUG` filter. +//! .with(layer_c.with_filter(LevelFilter::DEBUG)) +//! .with(info_layers) +//! .init(); +//!``` +//! +//! If a [`Filtered`] [`Layer`] is combined with another [`Layer`] +//! [`Layer::and_then`], and a filter is added to the [`Layered`] layer, that +//! layer will be filtered by *both* the inner filter and the outer filter. +//! Only spans and events that are enabled by *both* filters will be +//! observed by that layer. This can be used to implement complex filtering +//! trees. +//! +//! As an example, consider the following constraints: +//! - Suppose that a particular [target] is used to indicate events that +//! should be counted as part of a metrics system, which should be only +//! observed by a layer that collects metrics. +//! - A log of high-priority events ([`INFO`] and above) should be logged +//! to stdout, while more verbose events should be logged to a debugging log file. +//! - Metrics-focused events should *not* be included in either log output. +//! +//! In that case, it is possible to apply a filter to both logging layers to +//! exclude the metrics events, while additionally adding a [`LevelFilter`] +//! to the stdout log: +//! +//! ``` +//! # // wrap this in a function so we don't actually create `debug.log` when +//! # // running the doctests.. +//! # fn docs() -> Result<(), Box> { +//! use tracing_subscriber::{filter, prelude::*}; +//! use std::{fs::File, sync::Arc}; +//! +//! // A layer that logs events to stdout using the human-readable "pretty" +//! // format. +//! let stdout_log = tracing_subscriber::fmt::layer() +//! .pretty(); +//! +//! // A layer that logs events to a file. +//! let file = File::create("debug.log")?; +//! let debug_log = tracing_subscriber::fmt::layer() +//! .with_writer(Arc::new(file)); +//! +//! // A layer that collects metrics using specific events. +//! let metrics_layer = /* ... */ filter::LevelFilter::INFO; +//! +//! tracing_subscriber::registry() +//! .with( +//! stdout_log +//! // Add an `INFO` filter to the stdout logging layer +//! .with_filter(filter::LevelFilter::INFO) +//! // Combine the filtered `stdout_log` layer with the +//! // `debug_log` layer, producing a new `Layered` layer. +//! .and_then(debug_log) +//! // Add a filter to *both* layers that rejects spans and +//! // events whose targets start with `metrics`. +//! .with_filter(filter::filter_fn(|metadata| { +//! !metadata.target().starts_with("metrics") +//! })) +//! ) +//! .with( +//! // Add a filter to the metrics label that *only* enables +//! // events whose targets start with `metrics`. +//! metrics_layer.with_filter(filter::filter_fn(|metadata| { +//! metadata.target().starts_with("metrics") +//! })) +//! ) +//! .init(); +//! +//! // This event will *only* be recorded by the metrics layer. +//! tracing::info!(target: "metrics::cool_stuff_count", value = 42); +//! +//! // This event will only be seen by the debug log file layer: +//! tracing::debug!("this is a message, and part of a system of messages"); +//! +//! // This event will be seen by both the stdout log layer *and* +//! // the debug log file layer, but not by the metrics layer. +//! tracing::warn!("the message is a warning about danger!"); +//! # Ok(()) } +//! ``` +//! +//! ## Runtime Configuration With Layers +//! +//! In some cases, a particular [`Layer`] may be enabled or disabled based on +//! runtime configuration. This can introduce challenges, because the type of a +//! layered [`Subscriber`] depends on which layers are added to it: if an `if` +//! or `match` expression adds some [`Layer`]s in one branch and other layers +//! in another, the [`Subscriber`] values returned by those branches will have +//! different types. For example, the following _will not_ work: +//! +//! ```compile_fail +//! # fn docs() -> Result<(), Box> { +//! # struct Config { +//! # is_prod: bool, +//! # path: &'static str, +//! # } +//! # let cfg = Config { is_prod: false, path: "debug.log" }; +//! use std::{fs::File, sync::Arc}; +//! use tracing_subscriber::{Registry, prelude::*}; +//! +//! let stdout_log = tracing_subscriber::fmt::layer().pretty(); +//! let subscriber = Registry::default().with(stdout_log); +//! +//! // The compile error will occur here because the if and else +//! // branches have different (and therefore incompatible) types. +//! let subscriber = if cfg.is_prod { +//! let file = File::create(cfg.path)?; +//! let layer = tracing_subscriber::fmt::layer() +//! .json() +//! .with_writer(Arc::new(file)); +//! subscriber.with(layer) +//! } else { +//! subscriber +//! }; +//! +//! tracing::subscriber::set_global_default(subscriber) +//! .expect("Unable to set global subscriber"); +//! # Ok(()) } +//! ``` +//! +//! However, a [`Layer`] wrapped in an [`Option`] [also implements the `Layer` +//! trait][option-impl]. This allows individual layers to be enabled or disabled at +//! runtime while always producing a [`Subscriber`] of the same type. For +//! example: +//! +//! ``` +//! # fn docs() -> Result<(), Box> { +//! # struct Config { +//! # is_prod: bool, +//! # path: &'static str, +//! # } +//! # let cfg = Config { is_prod: false, path: "debug.log" }; +//! use std::{fs::File, sync::Arc}; +//! use tracing_subscriber::{Registry, prelude::*}; +//! +//! let stdout_log = tracing_subscriber::fmt::layer().pretty(); +//! let subscriber = Registry::default().with(stdout_log); +//! +//! // if `cfg.is_prod` is true, also log JSON-formatted logs to a file. +//! let json_log = if cfg.is_prod { +//! let file = File::create(cfg.path)?; +//! let json_log = tracing_subscriber::fmt::layer() +//! .json() +//! .with_writer(Arc::new(file)); +//! Some(json_log) +//! } else { +//! None +//! }; +//! +//! // If `cfg.is_prod` is false, then `json` will be `None`, and this layer +//! // will do nothing. However, the subscriber will still have the same type +//! // regardless of whether the `Option`'s value is `None` or `Some`. +//! let subscriber = subscriber.with(json_log); +//! +//! tracing::subscriber::set_global_default(subscriber) +//! .expect("Unable to set global subscriber"); +//! # Ok(()) } +//! ``` +//! +//! [`Subscriber`]: https://docs.rs/tracing-core/latest/tracing_core/subscriber/trait.Subscriber.html +//! [span IDs]: https://docs.rs/tracing-core/latest/tracing_core/span/struct.Id.html +//! [the current span]: Context::current_span +//! [`register_callsite`]: Layer::register_callsite +//! [`enabled`]: Layer::enabled +//! [`on_enter`]: Layer::on_enter +//! [`Layer::register_callsite`]: Layer::register_callsite +//! [`Layer::enabled`]: Layer::enabled +//! [`Interest::never()`]: https://docs.rs/tracing-core/latest/tracing_core/subscriber/struct.Interest.html#method.never +//! [option-impl]: crate::layer::Layer#impl-Layer-for-Option +//! [`Filtered`]: crate::filter::Filtered +//! [`filter`]: crate::filter +//! [`Targets`]: crate::filter::Targets +//! [`FilterFn`]: crate::filter::FilterFn +//! [`DynFilterFn`]: crate::filter::DynFilterFn +//! [level]: tracing_core::Level +//! [`INFO`]: tracing_core::Level::INFO +//! [`DEBUG`]: tracing_core::Level::DEBUG +//! [target]: tracing_core::Metadata::target +//! [`LevelFilter`]: crate::filter::LevelFilter +//! [feat]: crate#feature-flags +use crate::filter; + +use tracing_core::{ + metadata::Metadata, + span, + subscriber::{Interest, Subscriber}, + Event, LevelFilter, +}; + +use core::any::TypeId; + +feature! { + #![feature = "alloc"] + use alloc::boxed::Box; + use core::ops::{Deref, DerefMut}; +} + +mod context; +mod layered; +pub use self::{context::*, layered::*}; + +// The `tests` module is `pub(crate)` because it contains test utilities used by +// other modules. +#[cfg(test)] +pub(crate) mod tests; + +/// A composable handler for `tracing` events. +/// +/// A `Layer` implements a behavior for recording or collecting traces that can +/// be composed together with other `Layer`s to build a [`Subscriber`]. See the +/// [module-level documentation](crate::layer) for details. +/// +/// [`Subscriber`]: tracing_core::Subscriber +#[cfg_attr(docsrs, doc(notable_trait))] +pub trait Layer +where + S: Subscriber, + Self: 'static, +{ + /// Performs late initialization when attaching a `Layer` to a + /// [`Subscriber`]. + /// + /// This is a callback that is called when the `Layer` is added to a + /// [`Subscriber`] (e.g. in [`Layer::with_subscriber`] and + /// [`SubscriberExt::with`]). Since this can only occur before the + /// [`Subscriber`] has been set as the default, both the `Layer` and + /// [`Subscriber`] are passed to this method _mutably_. This gives the + /// `Layer` the opportunity to set any of its own fields with values + /// recieved by method calls on the [`Subscriber`]. + /// + /// For example, [`Filtered`] layers implement `on_layer` to call the + /// [`Subscriber`]'s [`register_filter`] method, and store the returned + /// [`FilterId`] as a field. + /// + /// **Note** In most cases, `Layer` implementations will not need to + /// implement this method. However, in cases where a type implementing + /// `Layer` wraps one or more other types that implement `Layer`, like the + /// [`Layered`] and [`Filtered`] types in this crate, that type MUST ensure + /// that the inner `Layer`s' `on_layer` methods are called. Otherwise, + /// functionality that relies on `on_layer`, such as [per-layer filtering], + /// may not work correctly. + /// + /// [`Filtered`]: crate::filter::Filtered + /// [`register_filter`]: crate::registry::LookupSpan::register_filter + /// [per-layer filtering]: #per-layer-filtering + /// [`FilterId`]: crate::filter::FilterId + fn on_layer(&mut self, subscriber: &mut S) { + let _ = subscriber; + } + + /// Registers a new callsite with this layer, returning whether or not + /// the layer is interested in being notified about the callsite, similarly + /// to [`Subscriber::register_callsite`]. + /// + /// By default, this returns [`Interest::always()`] if [`self.enabled`] returns + /// true, or [`Interest::never()`] if it returns false. + /// + /// 
+    /// Note: This method (and 
+    /// Layer::enabled) determine whether a span or event is
+    /// globally enabled, not whether the individual layer will be
+    /// notified about that span or event. This is intended to be used
+    /// by layers that implement filtering for the entire stack. Layers which do
+    /// not wish to be notified about certain spans or events but do not wish to
+    /// globally disable them should ignore those spans or events in their
+    /// on_event,
+    /// on_enter,
+    /// on_exit, and other notification
+    /// methods.
+    ///
+ /// + /// See [the trait-level documentation] for more information on filtering + /// with `Layer`s. + /// + /// Layers may also implement this method to perform any behaviour that + /// should be run once per callsite. If the layer wishes to use + /// `register_callsite` for per-callsite behaviour, but does not want to + /// globally enable or disable those callsites, it should always return + /// [`Interest::always()`]. + /// + /// [`Interest`]: https://docs.rs/tracing-core/latest/tracing_core/struct.Interest.html + /// [`Subscriber::register_callsite`]: https://docs.rs/tracing-core/latest/tracing_core/trait.Subscriber.html#method.register_callsite + /// [`Interest::never()`]: https://docs.rs/tracing-core/latest/tracing_core/subscriber/struct.Interest.html#method.never + /// [`Interest::always()`]: https://docs.rs/tracing-core/latest/tracing_core/subscriber/struct.Interest.html#method.always + /// [`self.enabled`]: #method.enabled + /// [`Layer::enabled`]: #method.enabled + /// [`on_event`]: #method.on_event + /// [`on_enter`]: #method.on_enter + /// [`on_exit`]: #method.on_exit + /// [the trait-level documentation]: #filtering-with-layers + fn register_callsite(&self, metadata: &'static Metadata<'static>) -> Interest { + if self.enabled(metadata, Context::none()) { + Interest::always() + } else { + Interest::never() + } + } + + /// Returns `true` if this layer is interested in a span or event with the + /// given `metadata` in the current [`Context`], similarly to + /// [`Subscriber::enabled`]. + /// + /// By default, this always returns `true`, allowing the wrapped subscriber + /// to choose to disable the span. + /// + /// 
+    /// Note: This method (and 
+    /// Layer::register_callsite) determine whether a span or event is
+    /// globally enabled, not whether the individual layer will be
+    /// notified about that span or event. This is intended to be used
+    /// by layers that implement filtering for the entire stack. Layers which do
+    /// not wish to be notified about certain spans or events but do not wish to
+    /// globally disable them should ignore those spans or events in their
+    /// on_event,
+    /// on_enter,
+    /// on_exit, and other notification
+    /// methods.
+    ///
+ /// + /// + /// See [the trait-level documentation] for more information on filtering + /// with `Layer`s. + /// + /// [`Interest`]: https://docs.rs/tracing-core/latest/tracing_core/struct.Interest.html + /// [`Context`]: ../struct.Context.html + /// [`Subscriber::enabled`]: https://docs.rs/tracing-core/latest/tracing_core/trait.Subscriber.html#method.enabled + /// [`Layer::register_callsite`]: #method.register_callsite + /// [`on_event`]: #method.on_event + /// [`on_enter`]: #method.on_enter + /// [`on_exit`]: #method.on_exit + /// [the trait-level documentation]: #filtering-with-layers + fn enabled(&self, metadata: &Metadata<'_>, ctx: Context<'_, S>) -> bool { + let _ = (metadata, ctx); + true + } + + /// Notifies this layer that a new span was constructed with the given + /// `Attributes` and `Id`. + fn on_new_span(&self, attrs: &span::Attributes<'_>, id: &span::Id, ctx: Context<'_, S>) { + let _ = (attrs, id, ctx); + } + + // TODO(eliza): do we want this to be a public API? If we end up moving + // filtering layers to a separate trait, we may no longer want `Layer`s to + // be able to participate in max level hinting... + #[doc(hidden)] + fn max_level_hint(&self) -> Option { + None + } + + /// Notifies this layer that a span with the given `Id` recorded the given + /// `values`. + // Note: it's unclear to me why we'd need the current span in `record` (the + // only thing the `Context` type currently provides), but passing it in anyway + // seems like a good future-proofing measure as it may grow other methods later... + fn on_record(&self, _span: &span::Id, _values: &span::Record<'_>, _ctx: Context<'_, S>) {} + + /// Notifies this layer that a span with the ID `span` recorded that it + /// follows from the span with the ID `follows`. + // Note: it's unclear to me why we'd need the current span in `record` (the + // only thing the `Context` type currently provides), but passing it in anyway + // seems like a good future-proofing measure as it may grow other methods later... + fn on_follows_from(&self, _span: &span::Id, _follows: &span::Id, _ctx: Context<'_, S>) {} + + /// Notifies this layer that an event has occurred. + fn on_event(&self, _event: &Event<'_>, _ctx: Context<'_, S>) {} + + /// Notifies this layer that a span with the given ID was entered. + fn on_enter(&self, _id: &span::Id, _ctx: Context<'_, S>) {} + + /// Notifies this layer that the span with the given ID was exited. + fn on_exit(&self, _id: &span::Id, _ctx: Context<'_, S>) {} + + /// Notifies this layer that the span with the given ID has been closed. + fn on_close(&self, _id: span::Id, _ctx: Context<'_, S>) {} + + /// Notifies this layer that a span ID has been cloned, and that the + /// subscriber returned a different ID. + fn on_id_change(&self, _old: &span::Id, _new: &span::Id, _ctx: Context<'_, S>) {} + + /// Composes this layer around the given `Layer`, returning a `Layered` + /// struct implementing `Layer`. + /// + /// The returned `Layer` will call the methods on this `Layer` and then + /// those of the new `Layer`, before calling the methods on the subscriber + /// it wraps. For example: + /// + /// ```rust + /// # use tracing_subscriber::layer::Layer; + /// # use tracing_core::Subscriber; + /// pub struct FooLayer { + /// // ... + /// } + /// + /// pub struct BarLayer { + /// // ... + /// } + /// + /// pub struct MySubscriber { + /// // ... + /// } + /// + /// impl Layer for FooLayer { + /// // ... + /// } + /// + /// impl Layer for BarLayer { + /// // ... + /// } + /// + /// # impl FooLayer { + /// # fn new() -> Self { Self {} } + /// # } + /// # impl BarLayer { + /// # fn new() -> Self { Self { }} + /// # } + /// # impl MySubscriber { + /// # fn new() -> Self { Self { }} + /// # } + /// # use tracing_core::{span::{Id, Attributes, Record}, Metadata, Event}; + /// # impl tracing_core::Subscriber for MySubscriber { + /// # fn new_span(&self, _: &Attributes) -> Id { Id::from_u64(1) } + /// # fn record(&self, _: &Id, _: &Record) {} + /// # fn event(&self, _: &Event) {} + /// # fn record_follows_from(&self, _: &Id, _: &Id) {} + /// # fn enabled(&self, _: &Metadata) -> bool { false } + /// # fn enter(&self, _: &Id) {} + /// # fn exit(&self, _: &Id) {} + /// # } + /// let subscriber = FooLayer::new() + /// .and_then(BarLayer::new()) + /// .with_subscriber(MySubscriber::new()); + /// ``` + /// + /// Multiple layers may be composed in this manner: + /// + /// ```rust + /// # use tracing_subscriber::layer::Layer; + /// # use tracing_core::Subscriber; + /// # pub struct FooLayer {} + /// # pub struct BarLayer {} + /// # pub struct MySubscriber {} + /// # impl Layer for FooLayer {} + /// # impl Layer for BarLayer {} + /// # impl FooLayer { + /// # fn new() -> Self { Self {} } + /// # } + /// # impl BarLayer { + /// # fn new() -> Self { Self { }} + /// # } + /// # impl MySubscriber { + /// # fn new() -> Self { Self { }} + /// # } + /// # use tracing_core::{span::{Id, Attributes, Record}, Metadata, Event}; + /// # impl tracing_core::Subscriber for MySubscriber { + /// # fn new_span(&self, _: &Attributes) -> Id { Id::from_u64(1) } + /// # fn record(&self, _: &Id, _: &Record) {} + /// # fn event(&self, _: &Event) {} + /// # fn record_follows_from(&self, _: &Id, _: &Id) {} + /// # fn enabled(&self, _: &Metadata) -> bool { false } + /// # fn enter(&self, _: &Id) {} + /// # fn exit(&self, _: &Id) {} + /// # } + /// pub struct BazLayer { + /// // ... + /// } + /// + /// impl Layer for BazLayer { + /// // ... + /// } + /// # impl BazLayer { fn new() -> Self { BazLayer {} } } + /// + /// let subscriber = FooLayer::new() + /// .and_then(BarLayer::new()) + /// .and_then(BazLayer::new()) + /// .with_subscriber(MySubscriber::new()); + /// ``` + fn and_then(self, layer: L) -> Layered + where + L: Layer, + Self: Sized, + { + let inner_has_layer_filter = filter::layer_has_plf(&self); + Layered::new(layer, self, inner_has_layer_filter) + } + + /// Composes this `Layer` with the given [`Subscriber`], returning a + /// `Layered` struct that implements [`Subscriber`]. + /// + /// The returned `Layered` subscriber will call the methods on this `Layer` + /// and then those of the wrapped subscriber. + /// + /// For example: + /// ```rust + /// # use tracing_subscriber::layer::Layer; + /// # use tracing_core::Subscriber; + /// pub struct FooLayer { + /// // ... + /// } + /// + /// pub struct MySubscriber { + /// // ... + /// } + /// + /// impl Layer for FooLayer { + /// // ... + /// } + /// + /// # impl FooLayer { + /// # fn new() -> Self { Self {} } + /// # } + /// # impl MySubscriber { + /// # fn new() -> Self { Self { }} + /// # } + /// # use tracing_core::{span::{Id, Attributes, Record}, Metadata}; + /// # impl tracing_core::Subscriber for MySubscriber { + /// # fn new_span(&self, _: &Attributes) -> Id { Id::from_u64(0) } + /// # fn record(&self, _: &Id, _: &Record) {} + /// # fn event(&self, _: &tracing_core::Event) {} + /// # fn record_follows_from(&self, _: &Id, _: &Id) {} + /// # fn enabled(&self, _: &Metadata) -> bool { false } + /// # fn enter(&self, _: &Id) {} + /// # fn exit(&self, _: &Id) {} + /// # } + /// let subscriber = FooLayer::new() + /// .with_subscriber(MySubscriber::new()); + ///``` + /// + /// [`Subscriber`]: https://docs.rs/tracing-core/latest/tracing_core/trait.Subscriber.html + fn with_subscriber(mut self, mut inner: S) -> Layered + where + Self: Sized, + { + let inner_has_layer_filter = filter::subscriber_has_plf(&inner); + self.on_layer(&mut inner); + Layered::new(self, inner, inner_has_layer_filter) + } + + /// Combines `self` with a [`Filter`], returning a [`Filtered`] layer. + /// + /// The [`Filter`] will control which spans and events are enabled for + /// this layer. See [the trait-level documentation][plf] for details on + /// per-layer filtering. + /// + /// [`Filtered`]: crate::filter::Filtered + /// [plf]: #per-layer-filtering + #[cfg(all(feature = "registry", feature = "std"))] + #[cfg_attr(docsrs, doc(cfg(all(feature = "registry", feature = "std"))))] + fn with_filter(self, filter: F) -> filter::Filtered + where + Self: Sized, + F: Filter, + { + filter::Filtered::new(self, filter) + } + + #[doc(hidden)] + unsafe fn downcast_raw(&self, id: TypeId) -> Option<*const ()> { + if id == TypeId::of::() { + Some(self as *const _ as *const ()) + } else { + None + } + } +} + +feature! { + #![all(feature = "registry", feature = "std")] + /// A per-[`Layer`] filter that determines whether a span or event is enabled + /// for an individual layer. + /// + /// See [the module-level documentation][plf] for details on using [`Filter`]s. + /// + /// [plf]: crate::layer#per-layer-filtering + #[cfg_attr(docsrs, doc(notable_trait))] + pub trait Filter { + /// Returns `true` if this layer is interested in a span or event with the + /// given [`Metadata`] in the current [`Context`], similarly to + /// [`Subscriber::enabled`]. + /// + /// If this returns `false`, the span or event will be disabled _for the + /// wrapped [`Layer`]_. Unlike [`Layer::enabled`], the span or event will + /// still be recorded if any _other_ layers choose to enable it. However, + /// the layer [filtered] by this filter will skip recording that span or + /// event. + /// + /// If all layers indicate that they do not wish to see this span or event, + /// it will be disabled. + /// + /// [`metadata`]: tracing_core::Metadata + /// [`Subscriber::enabled`]: tracing_core::Subscriber::enabled + /// [filtered]: crate::filter::Filtered + fn enabled(&self, meta: &Metadata<'_>, cx: &Context<'_, S>) -> bool; + + /// Returns an [`Interest`] indicating whether this layer will [always], + /// [sometimes], or [never] be interested in the given [`Metadata`]. + /// + /// When a given callsite will [always] or [never] be enabled, the results + /// of evaluating the filter may be cached for improved performance. + /// Therefore, if a filter is capable of determining that it will always or + /// never enable a particular callsite, providing an implementation of this + /// function is recommended. + /// + /// 
+        /// Note: If a Filter will perform
+        /// dynamic filtering that depends on the current context in which
+        /// a span or event was observered (e.g. only enabling an event when it
+        /// occurs within a particular span), it must return
+        /// Interest::sometimes() from this method. If it returns
+        /// Interest::always() or Interest::never(), the
+        /// enabled method may not be called when a particular instance
+        /// of that span or event is recorded.
+        ///
+ /// + /// This method is broadly similar to [`Subscriber::register_callsite`]; + /// however, since the returned value represents only the interest of + /// *this* layer, the resulting behavior is somewhat different. + /// + /// If a [`Subscriber`] returns [`Interest::always()`][always] or + /// [`Interest::never()`][never] for a given [`Metadata`], its [`enabled`] + /// method is then *guaranteed* to never be called for that callsite. On the + /// other hand, when a `Filter` returns [`Interest::always()`][always] or + /// [`Interest::never()`][never] for a callsite, _other_ [`Layer`]s may have + /// differing interests in that callsite. If this is the case, the callsite + /// will recieve [`Interest::sometimes()`][sometimes], and the [`enabled`] + /// method will still be called for that callsite when it records a span or + /// event. + /// + /// Returning [`Interest::always()`][always] or [`Interest::never()`][never] from + /// `Filter::callsite_enabled` will permanently enable or disable a + /// callsite (without requiring subsequent calls to [`enabled`]) if and only + /// if the following is true: + /// + /// - all [`Layer`]s that comprise the subscriber include `Filter`s + /// (this includes a tree of [`Layered`] layers that share the same + /// `Filter`) + /// - all those `Filter`s return the same [`Interest`]. + /// + /// For example, if a [`Subscriber`] consists of two [`Filtered`] layers, + /// and both of those layers return [`Interest::never()`][never], that + /// callsite *will* never be enabled, and the [`enabled`] methods of those + /// [`Filter`]s will not be called. + /// + /// ## Default Implementation + /// + /// The default implementation of this method assumes that the + /// `Filter`'s [`enabled`] method _may_ perform dynamic filtering, and + /// returns [`Interest::sometimes()`][sometimes], to ensure that [`enabled`] + /// is called to determine whether a particular _instance_ of the callsite + /// is enabled in the current context. If this is *not* the case, and the + /// `Filter`'s [`enabled`] method will always return the same result + /// for a particular [`Metadata`], this method can be overridden as + /// follows: + /// + /// ``` + /// use tracing_subscriber::layer; + /// use tracing_core::{Metadata, subscriber::Interest}; + /// + /// struct MyFilter { + /// // ... + /// } + /// + /// impl MyFilter { + /// // The actual logic for determining whether a `Metadata` is enabled + /// // must be factored out from the `enabled` method, so that it can be + /// // called without a `Context` (which is not provided to the + /// // `callsite_enabled` method). + /// fn is_enabled(&self, metadata: &Metadata<'_>) -> bool { + /// // ... + /// # drop(metadata); true + /// } + /// } + /// + /// impl layer::Filter for MyFilter { + /// fn enabled(&self, metadata: &Metadata<'_>, _: &layer::Context<'_, S>) -> bool { + /// // Even though we are implementing `callsite_enabled`, we must still provide a + /// // working implementation of `enabled`, as returning `Interest::always()` or + /// // `Interest::never()` will *allow* caching, but will not *guarantee* it. + /// // Other filters may still return `Interest::sometimes()`, so we may be + /// // asked again in `enabled`. + /// self.is_enabled(metadata) + /// } + /// + /// fn callsite_enabled(&self, metadata: &'static Metadata<'static>) -> Interest { + /// // The result of `self.enabled(metadata, ...)` will always be + /// // the same for any given `Metadata`, so we can convert it into + /// // an `Interest`: + /// if self.is_enabled(metadata) { + /// Interest::always() + /// } else { + /// Interest::never() + /// } + /// } + /// } + /// ``` + /// + /// [`Metadata`]: tracing_core::Metadata + /// [`Interest`]: tracing_core::Interest + /// [always]: tracing_core::Interest::always + /// [sometimes]: tracing_core::Interest::sometimes + /// [never]: tracing_core::Interest::never + /// [`Subscriber::register_callsite`]: tracing_core::Subscriber::register_callsite + /// [`Subscriber`]: tracing_core::Subscriber + /// [`enabled`]: Filter::enabled + /// [`Filtered`]: crate::filter::Filtered + fn callsite_enabled(&self, meta: &'static Metadata<'static>) -> Interest { + let _ = meta; + Interest::sometimes() + } + + /// Returns an optional hint of the highest [verbosity level][level] that + /// this `Filter` will enable. + /// + /// If this method returns a [`LevelFilter`], it will be used as a hint to + /// determine the most verbose level that will be enabled. This will allow + /// spans and events which are more verbose than that level to be skipped + /// more efficiently. An implementation of this method is optional, but + /// strongly encouraged. + /// + /// If the maximum level the `Filter` will enable can change over the + /// course of its lifetime, it is free to return a different value from + /// multiple invocations of this method. However, note that changes in the + /// maximum level will **only** be reflected after the callsite [`Interest`] + /// cache is rebuilt, by calling the + /// [`tracing_core::callsite::rebuild_interest_cache`][rebuild] function. + /// Therefore, if the `Filter will change the value returned by this + /// method, it is responsible for ensuring that + /// [`rebuild_interest_cache`][rebuild] is called after the value of the max + /// level changes. + /// + /// ## Default Implementation + /// + /// By default, this method returns `None`, indicating that the maximum + /// level is unknown. + /// + /// [level]: tracing_core::metadata::Level + /// [`LevelFilter`]: crate::filter::LevelFilter + /// [`Interest`]: tracing_core::subscriber::Interest + /// [rebuild]: tracing_core::callsite::rebuild_interest_cache + fn max_level_hint(&self) -> Option { + None + } + } +} + +/// Extension trait adding a `with(Layer)` combinator to `Subscriber`s. +pub trait SubscriberExt: Subscriber + crate::sealed::Sealed { + /// Wraps `self` with the provided `layer`. + fn with(self, layer: L) -> Layered + where + L: Layer, + Self: Sized, + { + layer.with_subscriber(self) + } +} + +/// A layer that does nothing. +#[derive(Clone, Debug, Default)] +pub struct Identity { + _p: (), +} + +// === impl Layer === + +impl Layer for Option +where + L: Layer, + S: Subscriber, +{ + fn on_layer(&mut self, subscriber: &mut S) { + if let Some(ref mut layer) = self { + layer.on_layer(subscriber) + } + } + + #[inline] + fn on_new_span(&self, attrs: &span::Attributes<'_>, id: &span::Id, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_new_span(attrs, id, ctx) + } + } + + #[inline] + fn register_callsite(&self, metadata: &'static Metadata<'static>) -> Interest { + match self { + Some(ref inner) => inner.register_callsite(metadata), + None => Interest::always(), + } + } + + #[inline] + fn enabled(&self, metadata: &Metadata<'_>, ctx: Context<'_, S>) -> bool { + match self { + Some(ref inner) => inner.enabled(metadata, ctx), + None => true, + } + } + + #[inline] + fn max_level_hint(&self) -> Option { + match self { + Some(ref inner) => inner.max_level_hint(), + None => None, + } + } + + #[inline] + fn on_record(&self, span: &span::Id, values: &span::Record<'_>, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_record(span, values, ctx); + } + } + + #[inline] + fn on_follows_from(&self, span: &span::Id, follows: &span::Id, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_follows_from(span, follows, ctx); + } + } + + #[inline] + fn on_event(&self, event: &Event<'_>, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_event(event, ctx); + } + } + + #[inline] + fn on_enter(&self, id: &span::Id, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_enter(id, ctx); + } + } + + #[inline] + fn on_exit(&self, id: &span::Id, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_exit(id, ctx); + } + } + + #[inline] + fn on_close(&self, id: span::Id, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_close(id, ctx); + } + } + + #[inline] + fn on_id_change(&self, old: &span::Id, new: &span::Id, ctx: Context<'_, S>) { + if let Some(ref inner) = self { + inner.on_id_change(old, new, ctx) + } + } + + #[doc(hidden)] + #[inline] + unsafe fn downcast_raw(&self, id: TypeId) -> Option<*const ()> { + if id == TypeId::of::() { + Some(self as *const _ as *const ()) + } else { + self.as_ref().and_then(|inner| inner.downcast_raw(id)) + } + } +} + +feature! { + #![any(feature = "std", feature = "alloc")] + + macro_rules! layer_impl_body { + () => { + #[inline] + fn on_layer(&mut self, subscriber: &mut S) { + self.deref_mut().on_layer(subscriber); + } + + #[inline] + fn on_new_span(&self, attrs: &span::Attributes<'_>, id: &span::Id, ctx: Context<'_, S>) { + self.deref().on_new_span(attrs, id, ctx) + } + + #[inline] + fn register_callsite(&self, metadata: &'static Metadata<'static>) -> Interest { + self.deref().register_callsite(metadata) + } + + #[inline] + fn enabled(&self, metadata: &Metadata<'_>, ctx: Context<'_, S>) -> bool { + self.deref().enabled(metadata, ctx) + } + + #[inline] + fn max_level_hint(&self) -> Option { + self.deref().max_level_hint() + } + + #[inline] + fn on_record(&self, span: &span::Id, values: &span::Record<'_>, ctx: Context<'_, S>) { + self.deref().on_record(span, values, ctx) + } + + #[inline] + fn on_follows_from(&self, span: &span::Id, follows: &span::Id, ctx: Context<'_, S>) { + self.deref().on_follows_from(span, follows, ctx) + } + + #[inline] + fn on_event(&self, event: &Event<'_>, ctx: Context<'_, S>) { + self.deref().on_event(event, ctx) + } + + #[inline] + fn on_enter(&self, id: &span::Id, ctx: Context<'_, S>) { + self.deref().on_enter(id, ctx) + } + + #[inline] + fn on_exit(&self, id: &span::Id, ctx: Context<'_, S>) { + self.deref().on_exit(id, ctx) + } + + #[inline] + fn on_close(&self, id: span::Id, ctx: Context<'_, S>) { + self.deref().on_close(id, ctx) + } + + #[inline] + fn on_id_change(&self, old: &span::Id, new: &span::Id, ctx: Context<'_, S>) { + self.deref().on_id_change(old, new, ctx) + } + + #[doc(hidden)] + #[inline] + unsafe fn downcast_raw(&self, id: TypeId) -> Option<*const ()> { + self.deref().downcast_raw(id) + } + }; + } + + impl Layer for Box + where + L: Layer, + S: Subscriber, + { + layer_impl_body! {} + } + + impl Layer for Box + Send + Sync> + where + S: Subscriber, + { + layer_impl_body! {} + } +} + +// === impl SubscriberExt === + +impl crate::sealed::Sealed for S {} +impl SubscriberExt for S {} + +// === impl Identity === + +impl Layer for Identity {} + +impl Identity { + /// Returns a new `Identity` layer. + pub fn new() -> Self { + Self { _p: () } + } +} -- cgit v1.2.3