Description: Disable network tests
Author: Ximin Luo <infinity0@debian.org>
Forwarded: TODO
---
This patch header follows DEP-3: http://dep.debian.net/deps/dep3/
Index: rust/src/tools/cargo/tests/testsuite/git_auth.rs
===================================================================
--- rust.orig/src/tools/cargo/tests/testsuite/git_auth.rs
+++ rust/src/tools/cargo/tests/testsuite/git_auth.rs
@@ -103,7 +103,7 @@ fn setup_failed_auth_test() -> (SocketAd
 }
 
 // Tests that HTTP auth is offered from `credential.helper`.
-#[cargo_test]
+#[allow(dead_code)]
 fn http_auth_offered() {
     // TODO(Seb): remove this once possible.
     if cargo_uses_gitoxide() {
@@ -172,7 +172,7 @@ Caused by:
 }
 
 // Boy, sure would be nice to have a TLS implementation in rust!
-#[cargo_test]
+#[allow(dead_code)]
 fn https_something_happens() {
     let server = TcpListener::bind("127.0.0.1:0").unwrap();
     let addr = server.local_addr().unwrap();
Index: rust/src/tools/cargo/tests/testsuite/net_config.rs
===================================================================
--- rust.orig/src/tools/cargo/tests/testsuite/net_config.rs
+++ rust/src/tools/cargo/tests/testsuite/net_config.rs
@@ -2,7 +2,7 @@
 
 use cargo_test_support::project;
 
-#[cargo_test]
+#[allow(dead_code)]
 fn net_retry_loads_from_config() {
     let p = project()
         .file(
@@ -38,7 +38,7 @@ fn net_retry_loads_from_config() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn net_retry_git_outputs_warning() {
     let p = project()
         .file(
Index: rust/src/tools/cargo/tests/testsuite/publish.rs
===================================================================
--- rust.orig/src/tools/cargo/tests/testsuite/publish.rs
+++ rust/src/tools/cargo/tests/testsuite/publish.rs
@@ -88,7 +88,7 @@ fn validate_upload_li() {
     );
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn simple() {
     let registry = RegistryBuilder::new().http_api().http_index().build();
 
@@ -130,7 +130,7 @@ You may press ctrl-c to skip waiting; th
 
 // Check that the `token` key works at the root instead of under a
 // `[registry]` table.
-#[cargo_test]
+#[allow(dead_code)]
 fn simple_publish_with_http() {
     let _reg = registry::RegistryBuilder::new()
         .http_api()
@@ -170,7 +170,7 @@ You may press ctrl-c to skip waiting; th
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn simple_publish_with_asymmetric() {
     let _reg = registry::RegistryBuilder::new()
         .http_api()
@@ -213,7 +213,7 @@ You may press ctrl-c to skip waiting; th
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn old_token_location() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -270,7 +270,7 @@ You may press ctrl-c [..]
     // Other tests will verify the endpoint gets the right payload.
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn simple_with_index() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -315,7 +315,7 @@ You may press ctrl-c [..]
     // Other tests will verify the endpoint gets the right payload.
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn git_deps() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -353,7 +353,7 @@ the `git` specification will be removed
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn path_dependency_no_version() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -393,7 +393,7 @@ the `path` specification will be removed
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn unpublishable_crate() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -426,7 +426,7 @@ fn unpublishable_crate() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn dont_publish_dirty() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -468,7 +468,7 @@ to proceed despite this and include the
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_clean() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -516,7 +516,7 @@ You may press ctrl-c to skip waiting; th
     // Other tests will verify the endpoint gets the right payload.
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_in_sub_repo() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -565,7 +565,7 @@ You may press ctrl-c [..]
     // Other tests will verify the endpoint gets the right payload.
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_when_ignored() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -614,7 +614,7 @@ You may press ctrl-c [..]
     // Other tests will verify the endpoint gets the right payload.
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn ignore_when_crate_ignored() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -662,7 +662,7 @@ You may press ctrl-c [..]
     // Other tests will verify the endpoint gets the right payload.
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn new_crate_rejected() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -695,7 +695,7 @@ fn new_crate_rejected() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn dry_run() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -738,7 +738,7 @@ See [..]
     assert!(!registry::api_path().join("api/v1/crates/new").exists());
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn registry_not_in_publish_list() {
     let p = project()
         .file(
@@ -771,7 +771,7 @@ The registry `alternative` is not listed
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_empty_list() {
     let p = project()
         .file(
@@ -800,7 +800,7 @@ fn publish_empty_list() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_allowed_registry() {
     let _registry = RegistryBuilder::new()
         .http_api()
@@ -860,7 +860,7 @@ You may press ctrl-c [..]
     );
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_implicitly_to_only_allowed_registry() {
     let _registry = RegistryBuilder::new()
         .http_api()
@@ -963,7 +963,7 @@ fn publish_failed_with_index_and_only_al
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_fail_with_no_registry_specified() {
     let p = project().build();
 
@@ -997,7 +997,7 @@ The registry `crates-io` is not listed i
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn block_publish_no_registry() {
     let p = project()
         .file(
@@ -1027,7 +1027,7 @@ fn block_publish_no_registry() {
 }
 
 // Explicitly setting `crates-io` in the publish list.
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_crates_io_explicit() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -1080,7 +1080,7 @@ You may press ctrl-c [..]
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_select_features() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -1131,7 +1131,7 @@ You may press ctrl-c [..]
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_all_features() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -1182,7 +1182,7 @@ You may press ctrl-c [..]
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_no_default_features() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -1218,7 +1218,7 @@ fn publish_with_no_default_features() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_patch() {
     let registry = RegistryBuilder::new().http_api().http_index().build();
     Package::new("bar", "1.0.0").publish();
@@ -1324,7 +1324,7 @@ You may press ctrl-c [..]
     );
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_checks_for_token_before_verify() {
     let registry = registry::RegistryBuilder::new()
         .no_configure_token()
@@ -1373,7 +1373,7 @@ fn publish_checks_for_token_before_verif
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_bad_source() {
     let p = project()
         .file(
@@ -1422,7 +1422,7 @@ include `--registry crates-io` to use cr
 }
 
 // A dependency with both `git` and `version`.
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_git_with_version() {
     let registry = RegistryBuilder::new().http_api().http_index().build();
 
@@ -1566,7 +1566,7 @@ You may press ctrl-c [..]
     );
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_dev_dep_no_version() {
     let registry = RegistryBuilder::new().http_api().http_index().build();
 
@@ -1656,7 +1656,7 @@ repository = "foo"
     );
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn credentials_ambiguous_filename() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -1712,7 +1712,7 @@ You may press ctrl-c [..]
 
 // --index will not load registry.token to avoid possibly leaking
 // crates.io token to another server.
-#[cargo_test]
+#[allow(dead_code)]
 fn index_requires_token() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -1747,7 +1747,7 @@ fn index_requires_token() {
 }
 
 // publish with source replacement without --registry
-#[cargo_test]
+#[allow(dead_code)]
 fn cratesio_source_replacement() {
     registry::init();
     let p = project()
@@ -1776,7 +1776,7 @@ include `--registry dummy-registry` or `
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish_with_missing_readme() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -1824,7 +1824,7 @@ Caused by:
 }
 
 // Registry returns an API error.
-#[cargo_test]
+#[allow(dead_code)]
 fn api_error_json() {
     let _registry = registry::RegistryBuilder::new()
         .alternative()
@@ -1872,7 +1872,7 @@ Caused by:
 }
 
 // Registry returns an API error with a 200 status code.
-#[cargo_test]
+#[allow(dead_code)]
 fn api_error_200() {
     let _registry = registry::RegistryBuilder::new()
         .alternative()
@@ -1920,7 +1920,7 @@ Caused by:
 }
 
 // Registry returns an error code without a JSON message.
-#[cargo_test]
+#[allow(dead_code)]
 fn api_error_code() {
     let _registry = registry::RegistryBuilder::new()
         .alternative()
@@ -1975,7 +1975,7 @@ Caused by:
 }
 
 // Registry has a network error.
-#[cargo_test]
+#[allow(dead_code)]
 fn api_curl_error() {
     let _registry = registry::RegistryBuilder::new()
         .alternative()
@@ -2025,7 +2025,7 @@ Caused by:
 }
 
 // Registry returns an invalid response.
-#[cargo_test]
+#[allow(dead_code)]
 fn api_other_error() {
     let _registry = registry::RegistryBuilder::new()
         .alternative()
@@ -2075,7 +2075,7 @@ Caused by:
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn in_package_workspace() {
     let registry = RegistryBuilder::new().http_api().http_index().build();
 
@@ -2127,7 +2127,7 @@ You may press ctrl-c [..]
     validate_upload_li();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn with_duplicate_spec_in_members() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -2179,7 +2179,7 @@ fn with_duplicate_spec_in_members() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn in_package_workspace_with_members_with_features_old() {
     let registry = RegistryBuilder::new().http_api().http_index().build();
 
@@ -2230,7 +2230,7 @@ You may press ctrl-c [..]
     validate_upload_li();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn in_virtual_workspace() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -2266,7 +2266,7 @@ fn in_virtual_workspace() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn in_virtual_workspace_with_p() {
     // `publish` generally requires a remote registry
     let registry = registry::RegistryBuilder::new().http_api().build();
@@ -2324,7 +2324,7 @@ You may press ctrl-c [..]
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn in_package_workspace_not_found() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -2369,7 +2369,7 @@ error: package ID specification `li` did
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn in_package_workspace_found_multiple() {
     // Use local registry for faster test times since no publish will occur
     let registry = registry::init();
@@ -2426,7 +2426,7 @@ error: the `-p` argument must be specifi
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 // https://github.com/rust-lang/cargo/issues/10536
 fn publish_path_dependency_without_workspace() {
     // Use local registry for faster test times since no publish will occur
@@ -2473,7 +2473,7 @@ error: package ID specification `bar` di
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn http_api_not_noop() {
     let registry = registry::RegistryBuilder::new().http_api().build();
 
@@ -2534,7 +2534,7 @@ You may press ctrl-c [..]
     p.cargo("build").run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn wait_for_first_publish() {
     // Counter for number of tries before the package is "published"
     let arc: Arc<Mutex<u32>> = Arc::new(Mutex::new(0));
@@ -2616,7 +2616,7 @@ You may press ctrl-c to skip waiting; th
 /// A separate test is needed for package names with - or _ as they hit
 /// the responder twice per cargo invocation. If that ever gets changed
 /// this test will need to be changed accordingly.
-#[cargo_test]
+#[allow(dead_code)]
 fn wait_for_first_publish_underscore() {
     // Counter for number of tries before the package is "published"
     let arc: Arc<Mutex<u32>> = Arc::new(Mutex::new(0));
@@ -2712,7 +2712,7 @@ You may press ctrl-c to skip waiting; th
     p.cargo("build").with_status(0).run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn wait_for_subsequent_publish() {
     // Counter for number of tries before the package is "published"
     let arc: Arc<Mutex<u32>> = Arc::new(Mutex::new(0));
@@ -2804,7 +2804,7 @@ You may press ctrl-c to skip waiting; th
     p.cargo("check").with_status(0).run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn skip_wait_for_publish() {
     // Intentionally using local registry so the crate never makes it to the index
     let registry = registry::init();
Index: rust/src/tools/cargo/tests/testsuite/credential_process.rs
===================================================================
--- rust.orig/src/tools/cargo/tests/testsuite/credential_process.rs
+++ rust/src/tools/cargo/tests/testsuite/credential_process.rs
@@ -63,7 +63,7 @@ fn get_token_test() -> (Project, TestReg
     (p, server)
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn publish() {
     // Checks that credential-process is used for `cargo publish`.
     let (p, _t) = get_token_test();
@@ -85,7 +85,7 @@ You may press ctrl-c [..]
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn basic_unsupported() {
     // Non-action commands don't support login/logout.
     let registry = registry::RegistryBuilder::new()
@@ -121,7 +121,7 @@ Caused by:
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn login() {
     let registry = registry::RegistryBuilder::new()
         .no_configure_token()
@@ -142,7 +142,7 @@ fn login() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn logout() {
     let server = registry::RegistryBuilder::new()
         .no_configure_token()
@@ -161,7 +161,7 @@ fn logout() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn yank() {
     let (p, _t) = get_token_test();
 
@@ -176,7 +176,7 @@ fn yank() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn owner() {
     let (p, _t) = get_token_test();
 
@@ -191,7 +191,7 @@ fn owner() {
         .run();
 }
 
-#[cargo_test]
+#[allow(dead_code)]
 fn invalid_token_output() {
     // Error when credential process does not output the expected format for a token.
     let cred_proj = project()