## The Slice Type
*Slices* let you reference a contiguous sequence of elements in a collection
rather than the whole collection. A slice is a kind of reference, so it does
not have ownership.
Here’s a small programming problem: write a function that takes a string of
words separated by spaces and returns the first word it finds in that string.
If the function doesn’t find a space in the string, the whole string must be
one word, so the entire string should be returned.
Let’s work through how we’d write the signature of this function without using
slices, to understand the problem that slices will solve:
```rust,ignore
fn first_word(s: &String) -> ?
```
The `first_word` function has a `&String` as a parameter. We don’t want
ownership, so this is fine. But what should we return? We don’t really have a
way to talk about *part* of a string. However, we could return the index of the
end of the word, indicated by a space. Let’s try that, as shown in Listing 4-7.
Filename: src/main.rs
```rust
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-07/src/main.rs:here}}
```
Listing 4-7: The `first_word` function that returns a
byte index value into the `String` parameter
Because we need to go through the `String` element by element and check whether
a value is a space, we’ll convert our `String` to an array of bytes using the
`as_bytes` method.
```rust,ignore
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-07/src/main.rs:as_bytes}}
```
Next, we create an iterator over the array of bytes using the `iter` method:
```rust,ignore
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-07/src/main.rs:iter}}
```
We’ll discuss iterators in more detail in [Chapter 13][ch13].
For now, know that `iter` is a method that returns each element in a collection
and that `enumerate` wraps the result of `iter` and returns each element as
part of a tuple instead. The first element of the tuple returned from
`enumerate` is the index, and the second element is a reference to the element.
This is a bit more convenient than calculating the index ourselves.
Because the `enumerate` method returns a tuple, we can use patterns to
destructure that tuple. We’ll be discussing patterns more in [Chapter
6][ch6]. In the `for` loop, we specify a pattern that has `i`
for the index in the tuple and `&item` for the single byte in the tuple.
Because we get a reference to the element from `.iter().enumerate()`, we use
`&` in the pattern.
Inside the `for` loop, we search for the byte that represents the space by
using the byte literal syntax. If we find a space, we return the position.
Otherwise, we return the length of the string by using `s.len()`.
```rust,ignore
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-07/src/main.rs:inside_for}}
```
We now have a way to find out the index of the end of the first word in the
string, but there’s a problem. We’re returning a `usize` on its own, but it’s
only a meaningful number in the context of the `&String`. In other words,
because it’s a separate value from the `String`, there’s no guarantee that it
will still be valid in the future. Consider the program in Listing 4-8 that
uses the `first_word` function from Listing 4-7.
Filename: src/main.rs
```rust
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-08/src/main.rs:here}}
```
Listing 4-8: Storing the result from calling the
`first_word` function and then changing the `String` contents
This program compiles without any errors and would also do so if we used `word`
after calling `s.clear()`. Because `word` isn’t connected to the state of `s`
at all, `word` still contains the value `5`. We could use that value `5` with
the variable `s` to try to extract the first word out, but this would be a bug
because the contents of `s` have changed since we saved `5` in `word`.
Having to worry about the index in `word` getting out of sync with the data in
`s` is tedious and error prone! Managing these indices is even more brittle if
we write a `second_word` function. Its signature would have to look like this:
```rust,ignore
fn second_word(s: &String) -> (usize, usize) {
```
Now we’re tracking a starting *and* an ending index, and we have even more
values that were calculated from data in a particular state but aren’t tied to
that state at all. We have three unrelated variables floating around that need
to be kept in sync.
Luckily, Rust has a solution to this problem: string slices.
### String Slices
A *string slice* is a reference to part of a `String`, and it looks like this:
```rust
{{#rustdoc_include ../listings/ch04-understanding-ownership/no-listing-17-slice/src/main.rs:here}}
```
Rather than a reference to the entire `String`, `hello` is a reference to a
portion of the `String`, specified in the extra `[0..5]` bit. We create slices
using a range within brackets by specifying `[starting_index..ending_index]`,
where `starting_index` is the first position in the slice and `ending_index` is
one more than the last position in the slice. Internally, the slice data
structure stores the starting position and the length of the slice, which
corresponds to `ending_index` minus `starting_index`. So, in the case of `let
world = &s[6..11];`, `world` would be a slice that contains a pointer to the
byte at index 6 of `s` with a length value of `5`.
Figure 4-6 shows this in a diagram.
Figure 4-6: String slice referring to part of a
`String`
With Rust’s `..` range syntax, if you want to start at index 0, you can drop
the value before the two periods. In other words, these are equal:
```rust
let s = String::from("hello");
let slice = &s[0..2];
let slice = &s[..2];
```
By the same token, if your slice includes the last byte of the `String`, you
can drop the trailing number. That means these are equal:
```rust
let s = String::from("hello");
let len = s.len();
let slice = &s[3..len];
let slice = &s[3..];
```
You can also drop both values to take a slice of the entire string. So these
are equal:
```rust
let s = String::from("hello");
let len = s.len();
let slice = &s[0..len];
let slice = &s[..];
```
> Note: String slice range indices must occur at valid UTF-8 character
> boundaries. If you attempt to create a string slice in the middle of a
> multibyte character, your program will exit with an error. For the purposes
> of introducing string slices, we are assuming ASCII only in this section; a
> more thorough discussion of UTF-8 handling is in the [“Storing UTF-8 Encoded
> Text with Strings”][strings] section of Chapter 8.
With all this information in mind, let’s rewrite `first_word` to return a
slice. The type that signifies “string slice” is written as `&str`:
Filename: src/main.rs
```rust
{{#rustdoc_include ../listings/ch04-understanding-ownership/no-listing-18-first-word-slice/src/main.rs:here}}
```
We get the index for the end of the word the same way we did in Listing 4-7, by
looking for the first occurrence of a space. When we find a space, we return a
string slice using the start of the string and the index of the space as the
starting and ending indices.
Now when we call `first_word`, we get back a single value that is tied to the
underlying data. The value is made up of a reference to the starting point of
the slice and the number of elements in the slice.
Returning a slice would also work for a `second_word` function:
```rust,ignore
fn second_word(s: &String) -> &str {
```
We now have a straightforward API that’s much harder to mess up because the
compiler will ensure the references into the `String` remain valid. Remember
the bug in the program in Listing 4-8, when we got the index to the end of the
first word but then cleared the string so our index was invalid? That code was
logically incorrect but didn’t show any immediate errors. The problems would
show up later if we kept trying to use the first word index with an emptied
string. Slices make this bug impossible and let us know we have a problem with
our code much sooner. Using the slice version of `first_word` will throw a
compile-time error:
Filename: src/main.rs
```rust,ignore,does_not_compile
{{#rustdoc_include ../listings/ch04-understanding-ownership/no-listing-19-slice-error/src/main.rs:here}}
```
Here’s the compiler error:
```console
{{#include ../listings/ch04-understanding-ownership/no-listing-19-slice-error/output.txt}}
```
Recall from the borrowing rules that if we have an immutable reference to
something, we cannot also take a mutable reference. Because `clear` needs to
truncate the `String`, it needs to get a mutable reference. The `println!`
after the call to `clear` uses the reference in `word`, so the immutable
reference must still be active at that point. Rust disallows the mutable
reference in `clear` and the immutable reference in `word` from existing at the
same time, and compilation fails. Not only has Rust made our API easier to use,
but it has also eliminated an entire class of errors at compile time!
#### String Literals as Slices
Recall that we talked about string literals being stored inside the binary. Now
that we know about slices, we can properly understand string literals:
```rust
let s = "Hello, world!";
```
The type of `s` here is `&str`: it’s a slice pointing to that specific point of
the binary. This is also why string literals are immutable; `&str` is an
immutable reference.
#### String Slices as Parameters
Knowing that you can take slices of literals and `String` values leads us to
one more improvement on `first_word`, and that’s its signature:
```rust,ignore
fn first_word(s: &String) -> &str {
```
A more experienced Rustacean would write the signature shown in Listing 4-9
instead because it allows us to use the same function on both `&String` values
and `&str` values.
```rust,ignore
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-09/src/main.rs:here}}
```
Listing 4-9: Improving the `first_word` function by using
a string slice for the type of the `s` parameter
If we have a string slice, we can pass that directly. If we have a `String`, we
can pass a slice of the `String` or a reference to the `String`. This
flexibility takes advantage of *deref coercions*, a feature we will cover in
[“Implicit Deref Coercions with Functions and
Methods”][deref-coercions] section of Chapter 15.
Defining a function to take a string slice instead of a reference to a `String`
makes our API more general and useful without losing any functionality:
Filename: src/main.rs
```rust
{{#rustdoc_include ../listings/ch04-understanding-ownership/listing-04-09/src/main.rs:usage}}
```
### Other Slices
String slices, as you might imagine, are specific to strings. But there’s a
more general slice type too. Consider this array:
```rust
let a = [1, 2, 3, 4, 5];
```
Just as we might want to refer to part of a string, we might want to refer to
part of an array. We’d do so like this:
```rust
let a = [1, 2, 3, 4, 5];
let slice = &a[1..3];
assert_eq!(slice, &[2, 3]);
```
This slice has the type `&[i32]`. It works the same way as string slices do, by
storing a reference to the first element and a length. You’ll use this kind of
slice for all sorts of other collections. We’ll discuss these collections in
detail when we talk about vectors in Chapter 8.
## Summary
The concepts of ownership, borrowing, and slices ensure memory safety in Rust
programs at compile time. The Rust language gives you control over your memory
usage in the same way as other systems programming languages, but having the
owner of data automatically clean up that data when the owner goes out of scope
means you don’t have to write and debug extra code to get this control.
Ownership affects how lots of other parts of Rust work, so we’ll talk about
these concepts further throughout the rest of the book. Let’s move on to
Chapter 5 and look at grouping pieces of data together in a `struct`.
[ch13]: ch13-02-iterators.html
[ch6]: ch06-02-match.html#patterns-that-bind-to-values
[strings]: ch08-02-strings.html#storing-utf-8-encoded-text-with-strings
[deref-coercions]: ch15-02-deref.html#implicit-deref-coercions-with-functions-and-methods