Unicode ident ============= [github](https://github.com/dtolnay/unicode-ident) [crates.io](https://crates.io/crates/unicode-ident) [docs.rs](https://docs.rs/unicode-ident) [build status](https://github.com/dtolnay/unicode-ident/actions?query=branch%3Amaster) Implementation of [Unicode Standard Annex #31][tr31] for determining which `char` values are valid in programming language identifiers. [tr31]: https://www.unicode.org/reports/tr31/ This crate is a better optimized implementation of the older `unicode-xid` crate. This crate uses less static storage, and is able to classify both ASCII and non-ASCII codepoints with better performance, 2–10× faster than `unicode-xid`.
## Comparison of performance The following table shows a comparison between five Unicode identifier implementations. - `unicode-ident` is this crate; - [`unicode-xid`] is a widely used crate run by the "unicode-rs" org; - `ucd-trie` and `fst` are two data structures supported by the [`ucd-generate`] tool; - [`roaring`] is a Rust implementation of Roaring bitmap. The *static storage* column shows the total size of `static` tables that the crate bakes into your binary, measured in 1000s of bytes. The remaining columns show the **cost per call** to evaluate whether a single `char` has the XID\_Start or XID\_Continue Unicode property, comparing across different ratios of ASCII to non-ASCII codepoints in the input data. [`unicode-xid`]: https://github.com/unicode-rs/unicode-xid [`ucd-generate`]: https://github.com/BurntSushi/ucd-generate [`roaring`]: https://github.com/RoaringBitmap/roaring-rs | | static storage | 0% nonascii | 1% | 10% | 100% nonascii | |---|---|---|---|---|---| | **`unicode-ident`** | 9.75 K | 0.96 ns | 0.95 ns | 1.09 ns | 1.55 ns | | **`unicode-xid`** | 11.34 K | 1.88 ns | 2.14 ns | 3.48 ns | 15.63 ns | | **`ucd-trie`** | 9.95 K | 1.29 ns | 1.28 ns | 1.36 ns | 2.15 ns | | **`fst`** | 133 K | 55.1 ns | 54.9 ns | 53.2 ns | 28.5 ns | | **`roaring`** | 66.1 K | 2.78 ns | 3.09 ns | 3.37 ns | 4.70 ns | Source code for the benchmark is provided in the *bench* directory of this repo and may be repeated by running `cargo criterion`.
## Comparison of data structures #### unicode-xid They use a sorted array of character ranges, and do a binary search to look up whether a given character lands inside one of those ranges. ```rust static XID_Continue_table: [(char, char); 763] = [ ('\u{30}', '\u{39}'), // 0-9 ('\u{41}', '\u{5a}'), // A-Z … ('\u{e0100}', '\u{e01ef}'), ]; ``` The static storage used by this data structure scales with the number of contiguous ranges of identifier codepoints in Unicode. Every table entry consumes 8 bytes, because it consists of a pair of 32-bit `char` values. In some ranges of the Unicode codepoint space, this is quite a sparse representation – there are some ranges where tens of thousands of adjacent codepoints are all valid identifier characters. In other places, the representation is quite inefficient. A characater like `µ` (U+00B5) which is surrounded by non-identifier codepoints consumes 64 bits in the table, while it would be just 1 bit in a dense bitmap. On a system with 64-byte cache lines, binary searching the table touches 7 cache lines on average. Each cache line fits only 8 table entries. Additionally, the branching performed during the binary search is probably mostly unpredictable to the branch predictor. Overall, the crate ends up being about 10× slower on non-ASCII input compared to the fastest crate. A potential improvement would be to pack the table entries more compactly. Rust's `char` type is a 21-bit integer padded to 32 bits, which means every table entry is holding 22 bits of wasted space, adding up to 3.9 K. They could instead fit every table entry into 6 bytes, leaving out some of the padding, for a 25% improvement in space used. With some cleverness it may be possible to fit in 5 bytes or even 4 bytes by storing a low char and an extent, instead of low char and high char. I don't expect that performance would improve much but this could be the most efficient for space across all the libraries, needing only about 7 K to store. #### ucd-trie Their data structure is a compressed trie set specifically tailored for Unicode codepoints. The design is credited to Raph Levien in [rust-lang/rust#33098]. [rust-lang/rust#33098]: https://github.com/rust-lang/rust/pull/33098 ```rust pub struct TrieSet { tree1_level1: &'static [u64; 32], tree2_level1: &'static [u8; 992], tree2_level2: &'static [u64], tree3_level1: &'static [u8; 256], tree3_level2: &'static [u8], tree3_level3: &'static [u64], } ``` It represents codepoint sets using a trie to achieve prefix compression. The final states of the trie are embedded in leaves or "chunks", where each chunk is a 64-bit integer. Each bit position of the integer corresponds to whether a particular codepoint is in the set or not. These chunks are not just a compact representation of the final states of the trie, but are also a form of suffix compression. In particular, if multiple ranges of 64 contiguous codepoints have the same Unicode properties, then they all map to the same chunk in the final level of the trie. Being tailored for Unicode codepoints, this trie is partitioned into three disjoint sets: tree1, tree2, tree3. The first set corresponds to codepoints \[0, 0x800), the second \[0x800, 0x10000) and the third \[0x10000, 0x110000). These partitions conveniently correspond to the space of 1 or 2 byte UTF-8 encoded codepoints, 3 byte UTF-8 encoded codepoints and 4 byte UTF-8 encoded codepoints, respectively. Lookups in this data structure are significantly more efficient than binary search. A lookup touches either 1, 2, or 3 cache lines based on which of the trie partitions is being accessed. One possible performance improvement would be for this crate to expose a way to query based on a UTF-8 encoded string, returning the Unicode property corresponding to the first character in the string. Without such an API, the caller is required to tokenize their UTF-8 encoded input data into `char`, hand the `char` into `ucd-trie`, only for `ucd-trie` to undo that work by converting back into the variable-length representation for trie traversal. #### fst Uses a [finite state transducer][fst]. This representation is built into [ucd-generate] but I am not aware of any advantage over the `ucd-trie` representation. In particular `ucd-trie` is optimized for storing Unicode properties while `fst` is not. [fst]: https://github.com/BurntSushi/fst [ucd-generate]: https://github.com/BurntSushi/ucd-generate As far as I can tell, the main thing that causes `fst` to have large size and slow lookups for this use case relative to `ucd-trie` is that it does not specialize for the fact that only 21 of the 32 bits in a `char` are meaningful. There are some dense arrays in the structure with large ranges that could never possibly be used. #### roaring This crate is a pure-Rust implementation of [Roaring Bitmap], a data structure designed for storing sets of 32-bit unsigned integers. [Roaring Bitmap]: https://roaringbitmap.org/about/ Roaring bitmaps are compressed bitmaps which tend to outperform conventional compressed bitmaps such as WAH, EWAH or Concise. In some instances, they can be hundreds of times faster and they often offer significantly better compression. In this use case the performance was reasonably competitive but still substantially slower than the Unicode-optimized crates. Meanwhile the compression was significantly worse, requiring 6× as much storage for the data structure. I also benchmarked the [`croaring`] crate which is an FFI wrapper around the C reference implementation of Roaring Bitmap. This crate was consistently about 15% slower than pure-Rust `roaring`, which could just be FFI overhead. I did not investigate further. [`croaring`]: https://crates.io/crates/croaring #### unicode-ident This crate is most similar to the `ucd-trie` library, in that it's based on bitmaps stored in the leafs of a trie representation, achieving both prefix compression and suffix compression. The key differences are: - Uses a single 2-level trie, rather than 3 disjoint partitions of different depth each. - Uses significantly larger chunks: 512 bits rather than 64 bits. - Compresses the XID\_Start and XID\_Continue properties together simultaneously, rather than duplicating identical trie leaf chunks across the two. The following diagram show the XID\_Start and XID\_Continue Unicode boolean properties in uncompressed form, in row-major order:
XID_StartXID_Continue
XID_Start bitmap XID_Continue bitmap
Uncompressed, these would take 140 K to store, which is beyond what would be reasonable. However, as you can see there is a large degree of similarity between the two bitmaps and across the rows, which lends well to compression. This crate stores one 512-bit "row" of the above bitmaps in the leaf level of a trie, and a single additional level to index into the leafs. It turns out there are 124 unique 512-bit chunks across the two bitmaps so 7 bits are sufficient to index them. The chunk size of 512 bits is selected as the size that minimizes the total size of the data structure. A smaller chunk, like 256 or 128 bits, would achieve better deduplication but require a larger index. A larger chunk would increase redundancy in the leaf bitmaps. 512 bit chunks are the optimum for total size of the index plus leaf bitmaps. In fact since there are only 124 unique chunks, we can use an 8-bit index with a spare bit to index at the half-chunk level. This achieves an additional 8.5% compression by eliminating redundancies between the second half of any chunk and the first half of any other chunk. Note that this is not the same as using chunks which are half the size, because it does not necessitate raising the size of the trie's first level. In contrast to binary search or the `ucd-trie` crate, performing lookups in this data structure is straight-line code with no need for branching. ```asm is_xid_start: mov eax, edi shr eax, 9 lea rcx, [rip + unicode_ident::tables::TRIE_START] add rcx, rax xor eax, eax cmp edi, 201728 cmovb rax, rcx test rax, rax lea rcx, [rip + .L__unnamed_1] cmovne rcx, rax movzx eax, byte ptr [rcx] shl rax, 5 mov ecx, edi shr ecx, 3 and ecx, 63 add rcx, rax lea rax, [rip + unicode_ident::tables::LEAF] mov al, byte ptr [rax + rcx] and dil, 7 mov ecx, edi shr al, cl and al, 1 ret ```
## License Licensed under either of Apache License, Version 2.0 or MIT license at your option.
Unless you explicitly state otherwise, any contribution intentionally submitted for inclusion in this crate by you, as defined in the Apache-2.0 license, shall be dual licensed as above, without any additional terms or conditions.