diff options
Diffstat (limited to '')
| -rwxr-xr-x | ctdb/doc/examples/nfs-ganesha-callout | 352 |
1 files changed, 352 insertions, 0 deletions
diff --git a/ctdb/doc/examples/nfs-ganesha-callout b/ctdb/doc/examples/nfs-ganesha-callout new file mode 100755 index 0000000..7c7b074 --- /dev/null +++ b/ctdb/doc/examples/nfs-ganesha-callout @@ -0,0 +1,352 @@ +#!/bin/sh + +# This is an example CTDB NFS callout script for Ganesha. It is based +# on the last version of 60.ganesha shipped with CTDB. As such, it +# does not try to monitor RPC services that were not monitored by +# 60.ganesha - this might be a useful improvement. It has also not +# been properly tested. + +# You should check your version of NFS Ganesha to see if it ships with +# a newer callout. + +# To use this: +# +# * Set CTDB_NFS_CALLOUT in your CTDB configuration to point to (a +# copy of) this script, making sure it is executable. +# +# * Create a new directory alongside the nfs-checks.d directory, for +# example nfs-checks-ganesha.d. Install 20.nfs-ganesha.check in +# this directory. Symlink to any other check files from +# nfs-checks.d that should still be used, such as +# 00.portmapper.check. Set CTDB_NFS_CHECKS_DIR to point to this new +# directory of check files. +# +# * It is recommended, but not required, to install the grace_period +# script (usually shipped in a utils package for NFS-Ganesha) to +# /usr/bin/grace_period + +# I (Martin Schwenke) hereby relicense all of my contributions to this +# callout (and, previously, to 60.ganesha) to a license compatible +# with NFS Ganesha (right now this is LGPLv3, but I'm flexible). +# There may be other contributions to be considered for relicensing, +# particularly those in commit 28cbe527d47822f870e8252495ab2a1c8fddd12f. + +###################################################################### + +# Exit on 1st error +set -e + +# Filesystem type and mount point for the (typically clustered) +# volume that will contain the NFS-Ganesha state. +state_fs="${CTDB_NFS_STATE_FS_TYPE:-gpfs}" +state_dir="${CTDB_NFS_STATE_MNT}" # No sane default. + +# To change the following, edit the default values below. Do not set +# these - they aren't configuration variables, just hooks for testing. +nfs_exports_file="${CTDB_NFS_EXPORTS_FILE:-/etc/ganesha/ganesha.conf}" +nfs_service="${CTDB_NFS_SERVICE:-nfs-ganesha}" +ganesha_rec_subdir=${CTDB_GANESHA_REC_SUBDIR:-.ganesha} +procfs=${PROCFS_PATH:-/proc} + +case "$state_fs" in +gpfs) + GANRECDIR="/var/lib/nfs/ganesha" + ;; +glusterfs) + if [ -z "${state_dir}" ]; then + echo "CTDB_NFS_STATE_MNT not defined for GlusterFS" + exit 1 + fi + host=$(hostname) + NODESTATEDIR="$state_dir/nfs-ganesha/$host" + GANSTATEDIR="$state_dir/nfs-ganesha/.noderefs" + NODESTATELN="$GANSTATEDIR/$host" + ;; +esac + + +################################################## + +usage () +{ + _c=$(basename "$0") + cat <<EOF +usage: $_c { shutdown | startup } + $_c { stop | start | check } nfs + $_c { releaseip | takeip } + $_c { monitor-list-shares } +EOF + exit 1 +} + + +################################################## +# Basic service stop and start + +basic_stop () +{ + case "$1" in + nfs) + service "$nfs_service" stop + ;; + *) + usage + esac +} + +basic_start () +{ + case "$1" in + nfs) + service "$nfs_service" start + ;; + *) + usage + esac +} + +################################################## +# "stop" and "start" options for restarting + +service_stop () +{ + case "$1" in + nfs) + basic_stop "nfs" + ;; + nlockmgr) + # Do nothing - used by statd-callout + : + ;; + *) + usage + esac +} + +service_start () +{ + case "$1" in + nfs) + basic_start "nfs" + ;; + nlockmgr) + # Do nothing - used by statd-callout + : + ;; + *) + usage + esac +} + +################################################## +# Nitty gritty - monitoring and IP handling + +# Check that a symlink exists, create it otherwise. +# Usage: check_ln <TARGET> <LINK> +check_ln () +{ + if [ ! -L "${2}" ] ; then + rm -vrf "${2}" + else + _t=$(readlink "${2}") + if [ "$_t" != "${1}" ] ; then + rm -v "${2}" + fi + fi + # This is not an "else". It also re-creates the link if it was + # removed above! + if [ ! -e "${2}" ]; then + ln -sfv "${1}" "${2}" + fi +} + +# Return 'active' if the shared filesystem is accessible. +get_cluster_fs_state () +{ + case $state_fs in + gpfs) + /usr/lpp/mmfs/bin/mmgetstate | awk 'NR == 4 { print $3 }' + ;; + glusterfs) + # Since we're past create_ganesha_recdirs(), we're active. + echo "active" + ;; + *) + echo "File system $state_fs not supported" + exit 1 + ;; + esac +} + +create_ganesha_recdirs () +{ + if ! _mounts=$(mount | grep "$state_fs"); then + echo "Failed to find mounts of type $state_fs" + exit 1 + fi + if [ -z "$_mounts" ]; then + echo "startup $state_fs not ready" + exit 0 + fi + + case $state_fs in + gpfs) + _mntpt=$(echo "$_mounts" | sort | awk 'NR == 1 {print $3}') + _link_dst="${_mntpt}/${ganesha_rec_subdir}" + mkdir -vp "$_link_dst" + check_ln "$_link_dst" "$GANRECDIR" + ;; + glusterfs) + [ -d /var/lib/nfs.backup ] || \ + mv /var/lib/nfs /var/lib/nfs.backup + check_ln "$NODESTATEDIR" /var/lib/nfs + + mkdir -p "${NODESTATEDIR}/ganesha/v4recov" + mkdir -p "${NODESTATEDIR}/ganesha/v4old" + mkdir -p "${NODESTATEDIR}/statd/sm" + mkdir -p "${NODESTATEDIR}/statd/sm.bak" + touch "${NODESTATEDIR}/state" + touch "${NODESTATEDIR}/statd/state" + + mkdir -p "$GANSTATEDIR" + check_ln "$NODESTATEDIR" "$NODESTATELN" + for _dir in "${GANSTATEDIR}/"* ; do + # Handle no directories case + if [ ! -d "$_dir" ] ; then + break + fi + + _node="${_dir##*/}" # basename + if [ "${_node}" != "${host}" ]; then + check_ln "${GANSTATEDIR}/${_node}/ganesha" \ + "${NODESTATEDIR}/ganesha/${_node}" + check_ln "${GANSTATEDIR}/${_node}/statd" \ + "${NODESTATEDIR}/statd/${_node}" + fi + done + ;; + esac +} + +service_check () +{ + create_ganesha_recdirs + + # Always succeed if cluster filesystem is not active + _cluster_fs_state=$(get_cluster_fs_state) + if [ "$_cluster_fs_state" != "active" ] ; then + return 0 + fi + + # Check that NFS Ganesha is running, according to PID file + _pidfile="/var/run/ganesha.pid" + _ganesha="/usr/bin/ganesha.nfsd" + if ! { read -r _pid < "$_pidfile" && \ + grep "$_ganesha" "${procfs}/${_pid}/cmdline" ; } >/dev/null 2>&1 + then + + echo "ERROR: NFS Ganesha not running according to PID file" + return 1 + fi + + return 0 +} + +#------------------------------------------------- + +nfs_releaseip () +{ + if [ -x "/usr/bin/grace_period" ]; then + /usr/bin/grace_period "2:${2}" + else + dbus-send --print-reply --system --dest=org.ganesha.nfsd \ + /org/ganesha/nfsd/admin org.ganesha.nfsd.admin.grace \ + string:"2:${2}" + fi +} + +nfs_takeip () +{ + case $state_fs in + glusterfs) + check_ln "$NODESTATEDIR" "${GANSTATEDIR}/${2}" + ;; + esac + if [ -x "/usr/bin/grace_period" ]; then + /usr/bin/grace_period "5:${2}" + else + dbus-send --print-reply --system --dest=org.ganesha.nfsd \ + /org/ganesha/nfsd/admin org.ganesha.nfsd.admin.grace \ + string:"5:${2}" + fi +} + +################################################## +# service init startup and final shutdown + +nfs_shutdown () +{ + basic_stop "nfs" +} + +nfs_startup () +{ + basic_stop "nfs" || true + + create_ganesha_recdirs + + basic_start "nfs" + _f="${procfs}/sys/net/ipv4/tcp_tw_recycle" + if [ -f "$_f" ] ; then + echo 1 >"$_f" + fi +} + +################################################## +# list share directories + +nfs_monitor_list_shares () +{ + grep Path "$nfs_exports_file" | + cut -f2 -d\" | + sort -u +} + +################################################## + +nfs_register () +{ + cat <<EOF +shutdown +startup +stop +start +check +releaseip +takeip +monitor-list-shares +EOF +} + +################################################## + +action="$1" +shift + +case "$action" in +shutdown) nfs_shutdown ;; +startup) nfs_startup ;; +stop) service_stop "$1" ;; +start) service_start "$1" ;; +check) service_check "$1" ;; +releaseip) nfs_releaseip "$@" ;; +takeip) nfs_takeip "$@" ;; +monitor-list-shares) nfs_monitor_list_shares ;; +register) nfs_register ;; +monitor-pre|monitor-post|releaseip-pre|takeip-pre) + # Not required/implemented + : + ;; +*) + usage +esac |