diff options
Diffstat (limited to 'selftest/skip')
| -rw-r--r-- | selftest/skip | 150 |
1 files changed, 150 insertions, 0 deletions
diff --git a/selftest/skip b/selftest/skip new file mode 100644 index 0000000..cc2fe89 --- /dev/null +++ b/selftest/skip @@ -0,0 +1,150 @@ +# This file contains a list of regular expressions matching testsuites that +# should be skipped during "make test". +# +# Possible reasons for adding a testsuite here: +# * Testsuite functionality not implemented on the server side +# * Testsuite crashes during run +# * Testsuite crashes server +# * Testsuite contains "flapping" tests (sometimes success, sometimes failure) +# * Testsuite hangs indefinitely +# +# If a testsuite is partially succeeding, please list the failing bits +# in the selftest/knownfail file rather than disabling the testsuite completely. +# That way those tests that do succeed still get run and we will be notified +# if a known failing test suddenly starts succeeding. +# +# If a testsuite is very slow, please add it to selftest/slow instead. +# This way it will still get run in "make slowtest" +# +# Please add a comment for each testsuite you disable explaining why +# it is being skipped. +^samba3.smbtorture_s3.*.randomipc +^samba3.smbtorture_s3.*.negnowait +^samba3.smbtorture_s3.*.nbench +^samba3.smbtorture_s3.*.errmapextract +^samba3.smbtorture_s3.*.trans2scan +^samba3.smbtorture_s3.*.nttransscan +^samba3.smbtorture_s3.*.deny1 +^samba3.smbtorture_s3.*.deny2 +^samba3.smbtorture_s3.*.openattr +^samba3.smbtorture_s3.*.casetable +^samba3.smbtorture_s3.*.eatest +^samba3.smbtorture_s3.*.mangle +^samba3.smbtorture_s3.*.utable +^samba3.smbtorture_s3.*.pipe_number +^samba3.smbtorture_s3.LOCAL-DBTRANS #hangs for some reason +^samba3.smbtorture_s3.*.DIR1 #loops on 64 bit linux with ext4 +^samba3.smbtorture_s3.plain.LOCK9.*\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.OPLOCK2\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.STREAMERROR\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.DIR1\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.DIR-CREATETIME\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.DELETE-LN\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.UID-REGRESSION-TEST\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.SHORTNAME-TEST\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.RENAME-ACCESS\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.OWNER-RIGHTS\(ad_dc_ntvfs\) # Don't test against the s4 ntvfs server anymore +^samba3.smbtorture_s3.plain.PIDHIGH\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.NTTRANS-FSCTL\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.SMB2-NEGPROT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.BAD-NBT-SESSION\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.SMB2-SESSION-REAUTH\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.SMB2-SESSION-RECONNECT\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.SMB1-WILD-MANGLE-UNLINK\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.smbtorture_s3.plain.SMB1-WILD-MANGLE-RENAME\(ad_dc_ntvfs\) # Fails against the s4 ntvfs server +^samba3.*base.charset +^samba3.*raw.context +^samba3.*raw.ioctl +^samba3.*raw.qfileinfo +^samba3.*raw.qfsinfo +^samba3.*raw.sfileinfo.base +^samba3.smb2.hold-oplock # Not a test, but a way to block other clients for a test +^samba3.smb2.hold-sharemode # Not a test, but a way to block other clients for a test +^samba3.smb2.check-sharemode # Not a test, but a way to test sharemodes outside of Samba +^samba3.smb2.set-sparse-ioctl # For manual testing, needs additional parameters. +^samba3.smb2.zero-data-ioctl # For manual testing, needs additional parameters. +^samba3.smb2.durable-open-disconnect # Not a test, but a way to create a disconnected durable +^samba3.smb2.scan # No tests +^samba3.smb2.oplock.levelii501 # No test yet +^samba3.smb2.timestamp_resolution # See the comment on the test +^samba4.smb2.timestamp_resolution +^samba3.rpc.samr.passwords.lockout\(ad_dc\) # No point running this version, it just waits 12 times longer the samba4 version of this test, covering the same code +^samba4.base.iometer +^samba4.base.casetable +^samba4.base.nttrans +^samba4.base.scan.maxfid +^samba4.raw.eas +^samba4.raw.hold-oplock # Not a test, but a way to block other clients for a test +^samba4.smb2.hold-oplock # Not a test, but a way to block other clients for a test +^samba4.smb2.hold-sharemode # Not a test, but a way to block other clients for a test +^samba4.smb2.check-sharemode # Not a test, but a way to test sharemodes outside of Samba +^samba4.smb2.set-sparse-ioctl # For manual testing, needs additional parameters. +^samba4.smb2.zero-data-ioctl # For manual testing, needs additional parameters. +^samba4.raw.ping.pong # Needs second server to test +^samba4.rpc.samr.accessmask +^samba4.raw.scan.eamax +^samba4.smb2.samba3misc +^samba4.smb2.notify +^samba4.smb2.scan +^samba4.smb2.lease +^samba4.smb2.durable-open +^samba4.smb2.durable-v2-open +^samba4.smb2.dir +^samba4.smb2.session +^samba4.smb2.compound +^samba4.smb2.multichannel +^samba4.smb2.oplock.levelii501 # No test yet +# SMB2 in s4 does not seem to support rename correctly +^samba4.smb2.rename.*\(ad_dc_ntvfs\)$ +# some operations don't work over the CIFS NTVFS backend yet (eg. root_fid) +^samba4.ntvfs.cifs.*.base.createx_sharemodes_dir +^samba4.ntvfs.cifs.*.base.charset +^samba4.ntvfs.cifs.*.base.iometer +^samba4.ntvfs.cifs.*.base.casetable +^samba4.ntvfs.cifs.*.base.nttrans +^samba4.ntvfs.cifs.*.base.scan-maxfid +^samba4.ntvfs.cifs.*.base.utable +^samba4.ntvfs.cifs.*.base.smb +^samba4.ntvfs.cifs.*.raw. +^samba4.rpc.samsync +^samba4.rpc.eventlog # Not provided by Samba 4 +^samba4.rpc.initshutdown # Not provided by Samba 4 +^samba4.rpc.spoolss # Not provided by Samba 4 +^samba4.rpc.svcctl # Not provided by Samba 4 +^samba4.rpc.atsvc # Not provided by Samba 4 +^samba4.rpc.frsapi # Not provided by Samba 4 +^samba4.rpc.ntsvcs # Not provided by Samba 4 +^samba4.rpc.dfs # Not provided by Samba 4 +^samba4.rpc.witness # Not provided by Samba 4 +^samba4.rpc.clusapi # clusapi server support not yet provided +^samba4.rpc.iremotewinspool.*\(ad_dc_default\)$ # Not provided by Samba 4 +^samba4.*.base.samba3.* # Samba3-specific test +^samba4.*.raw.samba3.* # Samba3-specific test +^samba4.rpc..*samba3.* # Samba3-specific test +^samba4.raw.offline # Samba 4 doesn't have much offline support yet +^samba4.rpc.countcalls # this is not useful now we have full IDL +^samba4.rap.basic +^samba4.rap.scan # same thing here - we have docs now +^samba4.rap.printing # Not provided by Samba 4 +^samba4.rap.rpc +^samba4.rap.sam # Not provided by Samba 4 +bench # don't run benchmarks in our selftest +^samba4..*trans2.scan # uses huge number of file descriptors +^samba4.*.base.scan.ioctl # bad idea in make test +^samba4.*.base.scan.pipe_number # bad idea in make test +^samba4.*.base.secleak # no point on build farm +^samba4.*.base.delaywrite # This is randomly failing, depending on timing and filesystem features +^samba4.*.base.winattr +^samba4.*.base.birthtime +^samba4.*base.defer_open +^samba4.smb2.acls # new test which doesn't pass yet +^samba4.smb2.sdread +# ktutil might not be installed or from mit... +# we should build a samba4ktutil and use that instead +^samba4.blackbox.ktpass # this test isn't portable ... +^samba.tests.dcerpc.unix # This contains a server-side getpwuid call which hangs the server when nss_winbindd is in use +^samba4.smb2.mangle.*\(ad_dc_ntvfs\)$ # Ignore ad_dc_ntvfs since this is a new test +^samba4.smb2.tcon.*\(ad_dc_ntvfs\)$ # Ignore ad_dc_ntvfs since this is a new test +^samba4.smb2.mkdir.*\(ad_dc_ntvfs\)$ # Ignore ad_dc_ntvfs since this is a new test +^samba.tests.reparsepoints.* +^samba3.blackbox.open-eintr.* |