Adding upstream version 1:4.13+dfsg1.upstream/1%4.13+dfsg1

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

23 files changed, 2050 insertions, 0 deletions

diff --git a/etc/Makefile.am b/etc/Makefile.am
new file mode 100644
index 0000000..c5c0620
--- /dev/null
+++ b/etc/Makefile.am
@@ -0,0 +1,23 @@
+# This is a dummy Makefile.am to get automake work flawlessly,
+# and also cooperate to make a distribution for `make dist'
+
+sysconf_DATA = login.defs
+
+defaultdir = $(sysconfdir)/default
+default_DATA =
+
+nonpam_files = \
+	limits \
+	login.access
+
+if !USE_PAM
+nonpamdir = $(sysconfdir)
+nonpam_DATA = $(nonpam_files)
+endif
+
+EXTRA_DIST = \
+	$(nonpam_files) \
+	$(sysconf_DATA) \
+	$(default_DATA)
+
+SUBDIRS = pam.d
diff --git a/etc/Makefile.in b/etc/Makefile.in
new file mode 100644
index 0000000..5dda065
--- /dev/null
+++ b/etc/Makefile.in
@@ -0,0 +1,786 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# This is a dummy Makefile.am to get automake work flawlessly,
+# and also cooperate to make a distribution for `make dist'
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+subdir = etc
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
+	ctags-recursive dvi-recursive html-recursive info-recursive \
+	install-data-recursive install-dvi-recursive \
+	install-exec-recursive install-html-recursive \
+	install-info-recursive install-pdf-recursive \
+	install-ps-recursive install-recursive installcheck-recursive \
+	installdirs-recursive pdf-recursive ps-recursive \
+	tags-recursive uninstall-recursive
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(defaultdir)" "$(DESTDIR)$(nonpamdir)" \
+	"$(DESTDIR)$(sysconfdir)"
+DATA = $(default_DATA) $(nonpam_DATA) $(sysconf_DATA)
+RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
+  distclean-recursive maintainer-clean-recursive
+am__recursive_targets = \
+  $(RECURSIVE_TARGETS) \
+  $(RECURSIVE_CLEAN_TARGETS) \
+  $(am__extra_recursive_targets)
+AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
+	distdir distdir-am
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+# Read a list of newline-separated strings from the standard input,
+# and print each of them once, without duplicates.  Input order is
+# *not* preserved.
+am__uniquify_input = $(AWK) '\
+  BEGIN { nonempty = 0; } \
+  { items[$$0] = 1; nonempty = 1; } \
+  END { if (nonempty) { for (i in items) print i; }; } \
+'
+# Make sure the list of sources is unique.  This is necessary because,
+# e.g., the same source file might be shared among _SOURCES variables
+# for different programs/libraries.
+am__define_uniq_tagged_files = \
+  list='$(am__tagged_files)'; \
+  unique=`for i in $$list; do \
+    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+  done | $(am__uniquify_input)`
+DIST_SUBDIRS = $(SUBDIRS)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+am__relativize = \
+  dir0=`pwd`; \
+  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
+  sed_rest='s,^[^/]*/*,,'; \
+  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
+  sed_butlast='s,/*[^/]*$$,,'; \
+  while test -n "$$dir1"; do \
+    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
+    if test "$$first" != "."; then \
+      if test "$$first" = ".."; then \
+        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
+        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
+      else \
+        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
+        if test "$$first2" = "$$first"; then \
+          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
+        else \
+          dir2="../$$dir2"; \
+        fi; \
+        dir0="$$dir0"/"$$first"; \
+      fi; \
+    fi; \
+    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
+  done; \
+  reldir="$$dir2"
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ECONF_CPPFLAGS = @ECONF_CPPFLAGS@
+EGREP = @EGREP@
+ETAGS = @ETAGS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GROUP_NAME_MAX_LENGTH = @GROUP_NAME_MAX_LENGTH@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBACL = @LIBACL@
+LIBATTR = @LIBATTR@
+LIBAUDIT = @LIBAUDIT@
+LIBCRACK = @LIBCRACK@
+LIBCRYPT = @LIBCRYPT@
+LIBECONF = @LIBECONF@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBMD = @LIBMD@
+LIBOBJS = @LIBOBJS@
+LIBPAM = @LIBPAM@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBSEMANAGE = @LIBSEMANAGE@
+LIBSKEY = @LIBSKEY@
+LIBSUBID_ABI = @LIBSUBID_ABI@
+LIBSUBID_ABI_MAJOR = @LIBSUBID_ABI_MAJOR@
+LIBSUBID_ABI_MICRO = @LIBSUBID_ABI_MICRO@
+LIBSUBID_ABI_MINOR = @LIBSUBID_ABI_MINOR@
+LIBTCB = @LIBTCB@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LIYESCRYPT = @LIYESCRYPT@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VENDORDIR = @VENDORDIR@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+XMLCATALOG = @XMLCATALOG@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+capcmd = @capcmd@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+sysconf_DATA = login.defs
+defaultdir = $(sysconfdir)/default
+default_DATA = 
+nonpam_files = \
+	limits \
+	login.access
+
+@USE_PAM_FALSE@nonpamdir = $(sysconfdir)
+@USE_PAM_FALSE@nonpam_DATA = $(nonpam_files)
+EXTRA_DIST = \
+	$(nonpam_files) \
+	$(sysconf_DATA) \
+	$(default_DATA)
+
+SUBDIRS = pam.d
+all: all-recursive
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign etc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign etc/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-defaultDATA: $(default_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(defaultdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(defaultdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(defaultdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(defaultdir)" || exit $$?; \
+	done
+
+uninstall-defaultDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(default_DATA)'; test -n "$(defaultdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(defaultdir)'; $(am__uninstall_files_from_dir)
+install-nonpamDATA: $(nonpam_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(nonpam_DATA)'; test -n "$(nonpamdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(nonpamdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(nonpamdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(nonpamdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(nonpamdir)" || exit $$?; \
+	done
+
+uninstall-nonpamDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(nonpam_DATA)'; test -n "$(nonpamdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(nonpamdir)'; $(am__uninstall_files_from_dir)
+install-sysconfDATA: $(sysconf_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
+	done
+
+uninstall-sysconfDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
+
+# This directory's subdirectories are mostly independent; you can cd
+# into them and run 'make' without going through this Makefile.
+# To change the values of 'make' variables: instead of editing Makefiles,
+# (1) if the variable is set in 'config.status', edit 'config.status'
+#     (which will cause the Makefiles to be regenerated when you run 'make');
+# (2) otherwise, pass the desired values on the 'make' command line.
+$(am__recursive_targets):
+	@fail=; \
+	if $(am__make_keepgoing); then \
+	  failcom='fail=yes'; \
+	else \
+	  failcom='exit 1'; \
+	fi; \
+	dot_seen=no; \
+	target=`echo $@ | sed s/-recursive//`; \
+	case "$@" in \
+	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
+	  *) list='$(SUBDIRS)' ;; \
+	esac; \
+	for subdir in $$list; do \
+	  echo "Making $$target in $$subdir"; \
+	  if test "$$subdir" = "."; then \
+	    dot_seen=yes; \
+	    local_target="$$target-am"; \
+	  else \
+	    local_target="$$target"; \
+	  fi; \
+	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
+	  || eval $$failcom; \
+	done; \
+	if test "$$dot_seen" = "no"; then \
+	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
+	fi; test -z "$$fail"
+
+ID: $(am__tagged_files)
+	$(am__define_uniq_tagged_files); mkid -fID $$unique
+tags: tags-recursive
+TAGS: tags
+
+tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	set x; \
+	here=`pwd`; \
+	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
+	  include_option=--etags-include; \
+	  empty_fix=.; \
+	else \
+	  include_option=--include; \
+	  empty_fix=; \
+	fi; \
+	list='$(SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    test ! -f $$subdir/TAGS || \
+	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
+	  fi; \
+	done; \
+	$(am__define_uniq_tagged_files); \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: ctags-recursive
+
+CTAGS: ctags
+ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
+	$(am__define_uniq_tagged_files); \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+cscopelist: cscopelist-recursive
+
+cscopelist-am: $(am__tagged_files)
+	list='$(am__tagged_files)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
+	  if test "$$subdir" = .; then :; else \
+	    $(am__make_dryrun) \
+	      || test -d "$(distdir)/$$subdir" \
+	      || $(MKDIR_P) "$(distdir)/$$subdir" \
+	      || exit 1; \
+	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
+	    $(am__relativize); \
+	    new_distdir=$$reldir; \
+	    dir1=$$subdir; dir2="$(top_distdir)"; \
+	    $(am__relativize); \
+	    new_top_distdir=$$reldir; \
+	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
+	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
+	    ($(am__cd) $$subdir && \
+	      $(MAKE) $(AM_MAKEFLAGS) \
+	        top_distdir="$$new_top_distdir" \
+	        distdir="$$new_distdir" \
+		am__remove_distdir=: \
+		am__skip_length_check=: \
+		am__skip_mode_fix=: \
+	        distdir) \
+	      || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-recursive
+all-am: Makefile $(DATA)
+installdirs: installdirs-recursive
+installdirs-am:
+	for dir in "$(DESTDIR)$(defaultdir)" "$(DESTDIR)$(nonpamdir)" "$(DESTDIR)$(sysconfdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-recursive
+install-exec: install-exec-recursive
+install-data: install-data-recursive
+uninstall: uninstall-recursive
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-recursive
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-recursive
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-recursive
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic distclean-tags
+
+dvi: dvi-recursive
+
+dvi-am:
+
+html: html-recursive
+
+html-am:
+
+info: info-recursive
+
+info-am:
+
+install-data-am: install-defaultDATA install-nonpamDATA
+
+install-dvi: install-dvi-recursive
+
+install-dvi-am:
+
+install-exec-am: install-sysconfDATA
+
+install-html: install-html-recursive
+
+install-html-am:
+
+install-info: install-info-recursive
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-recursive
+
+install-pdf-am:
+
+install-ps: install-ps-recursive
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-recursive
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-recursive
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-recursive
+
+pdf-am:
+
+ps: ps-recursive
+
+ps-am:
+
+uninstall-am: uninstall-defaultDATA uninstall-nonpamDATA \
+	uninstall-sysconfDATA
+
+.MAKE: $(am__recursive_targets) install-am install-strip
+
+.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
+	check-am clean clean-generic clean-libtool cscopelist-am ctags \
+	ctags-am distclean distclean-generic distclean-libtool \
+	distclean-tags distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am \
+	install-defaultDATA install-dvi install-dvi-am install-exec \
+	install-exec-am install-html install-html-am install-info \
+	install-info-am install-man install-nonpamDATA install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	install-sysconfDATA installcheck installcheck-am installdirs \
+	installdirs-am maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags tags-am uninstall uninstall-am \
+	uninstall-defaultDATA uninstall-nonpamDATA \
+	uninstall-sysconfDATA
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/etc/limits b/etc/limits
new file mode 100644
index 0000000..d39f2d5
--- /dev/null
+++ b/etc/limits
@@ -0,0 +1,30 @@
+# /etc/limits contains user resource limits.
+# See limits(5).
+#
+# Format:
+# <username> <limits-string>
+#
+# default entry is '*' for username
+#
+# Valid flags are:
+# A: max address space (KB)
+# C: max core file size (KB)
+# D: max data size (KB)
+# F: maximum filesize (KB)
+# M: max locked-in-memory address space (KB) [only for root on Linux 2.0.x]
+# N: max number of open files
+# R: max resident set size (KB) [no effect on Linux 2.0.x]
+# S: max stack size (KB)
+# T: max CPU time (MIN)
+# U: max number of processes
+# L: max number of logins for this user
+# I: max nice value (0..39 translates to 20..-19)
+# O: max real time priority (0..MAX_RT_PRIO)
+#
+# Examples:
+# the default entry
+#* L2 D6144 R2048 S2048 U32 N32 F16384 T5 C0 I20 O0
+# another way of suspending a user login
+#guest   L0
+# this account has no limits
+#sysadm  -
diff --git a/etc/login.access b/etc/login.access
new file mode 100644
index 0000000..d9d5f09
--- /dev/null
+++ b/etc/login.access
@@ -0,0 +1,54 @@
+# $Id$
+#
+# Login access control table.
+#
+# When someone logs in, the table is scanned for the first entry that
+# matches the (user, host) combination, or, in case of non-networked
+# logins, the first entry that matches the (user, tty) combination.  The
+# permissions field of that table entry determines whether the login will
+# be accepted or refused.
+#
+# Format of the login access control table is three fields separated by a
+# ":" character:
+#
+# 	permission : users : origins
+#
+# The first field should be a "+" (access granted) or "-" (access denied)
+# character.
+#
+# The second field should be a list of one or more login names, group
+# names, or ALL (always matches). A pattern of the form user@host is
+# matched when the login name matches the "user" part, and when the
+# "host" part matches the local machine name.
+#
+# The third field should be a list of one or more tty names (for
+# non-networked logins), host names, domain names (begin with "."), host
+# addresses, internet network numbers (end with "."), ALL (always
+# matches) or LOCAL (matches any string that does not contain a "."
+# character).
+#
+# If you run NIS you can use @netgroupname in host or user patterns; this
+# even works for @usergroup@@hostgroup patterns. Weird.
+#
+# The EXCEPT operator makes it possible to write very compact rules.
+#
+# The group file is searched only when a name does not match that of the
+# logged-in user. Only groups are matched in which users are explicitly
+# listed: the program does not look at a user's primary group id value.
+#
+##############################################################################
+#
+# Disallow console logins to all but a few accounts.
+#
+#-:ALL EXCEPT wheel shutdown sync:console
+#
+# Disallow non-local logins to privileged accounts (group wheel).
+#
+#-:wheel:ALL EXCEPT LOCAL .win.tue.nl
+#
+# Some accounts are not allowed to login from anywhere:
+#
+#-:wsbscaro wsbsecr wsbspac wsbsym wscosor wstaiwde:ALL
+#
+# All other accounts are allowed to login from anywhere.
+#
diff --git a/etc/login.defs b/etc/login.defs
new file mode 100644
index 0000000..114dbcd
--- /dev/null
+++ b/etc/login.defs
@@ -0,0 +1,478 @@
+#
+# /etc/login.defs - Configuration control definitions for the shadow package.
+#
+#	$Id$
+#
+
+#
+# Delay in seconds before being allowed another attempt after a login failure
+# Note: When PAM is used, some modules may enforce a minimum delay (e.g.
+#       pam_unix(8) enforces a 2s delay)
+#
+FAIL_DELAY		3
+
+#
+# Enable logging and display of /var/log/faillog login(1) failure info.
+#
+FAILLOG_ENAB		yes
+
+#
+# Enable display of unknown usernames when login(1) failures are recorded.
+#
+LOG_UNKFAIL_ENAB	no
+
+#
+# Enable logging of successful logins
+#
+LOG_OK_LOGINS		no
+
+#
+# Enable logging and display of /var/log/lastlog login(1) time info.
+#
+LASTLOG_ENAB		yes
+
+#
+# Limit the highest user ID number for which the lastlog entries should
+# be updated.
+#
+# No LASTLOG_UID_MAX means that there is no user ID limit for writing
+# lastlog entries.
+#
+#LASTLOG_UID_MAX
+
+#
+# Enable checking and display of mailbox status upon login.
+#
+# Disable if the shell startup files already check for mail
+# ("mailx -e" or equivalent).
+#
+MAIL_CHECK_ENAB		yes
+
+#
+# Enable additional checks upon password changes.
+#
+OBSCURE_CHECKS_ENAB	yes
+
+#
+# Enable checking of time restrictions specified in /etc/porttime.
+#
+PORTTIME_CHECKS_ENAB	yes
+
+#
+# Enable setting of ulimit, umask, and niceness from passwd(5) gecos field.
+#
+QUOTAS_ENAB		yes
+
+#
+# Enable "syslog" logging of su(1) activity - in addition to sulog file logging.
+# SYSLOG_SG_ENAB does the same for newgrp(1) and sg(1).
+#
+SYSLOG_SU_ENAB		yes
+SYSLOG_SG_ENAB		yes
+
+#
+# If defined, either full pathname of a file containing device names or
+# a ":" delimited list of device names.  Root logins will be allowed only
+# from these devices.
+#
+CONSOLE		/etc/securetty
+#CONSOLE	console:tty01:tty02:tty03:tty04
+
+#
+# If defined, all su(1) activity is logged to this file.
+#
+#SULOG_FILE	/var/log/sulog
+
+#
+# If defined, ":" delimited list of "message of the day" files to
+# be displayed upon login.
+#
+MOTD_FILE	/etc/motd
+#MOTD_FILE	/etc/motd:/usr/lib/news/news-motd
+
+#
+# If defined, this file will be output before each login(1) prompt.
+#
+#ISSUE_FILE	/etc/issue
+
+#
+# If defined, file which maps tty line to TERM environment parameter.
+# Each line of the file is in a format similar to "vt100  tty01".
+#
+#TTYTYPE_FILE	/etc/ttytype
+
+#
+# If defined, login(1) failures will be logged here in a utmp format.
+# last(1), when invoked as lastb(1), will read /var/log/btmp, so...
+#
+FTMP_FILE	/var/log/btmp
+
+#
+# If defined, name of file whose presence will inhibit non-root
+# logins.  The content of this file should be a message indicating
+# why logins are inhibited.
+#
+NOLOGINS_FILE	/etc/nologin
+
+#
+# If defined, the command name to display when running "su -".  For
+# example, if this is defined as "su" then ps(1) will display the
+# command as "-su".  If not defined, then ps(1) will display the
+# name of the shell actually being run, e.g. something like "-sh".
+#
+SU_NAME		su
+
+#
+# *REQUIRED*
+#   Directory where mailboxes reside, _or_ name of file, relative to the
+#   home directory.  If you _do_ define both, MAIL_DIR takes precedence.
+#
+MAIL_DIR	/var/spool/mail
+#MAIL_FILE	.mail
+
+#
+# If defined, file which inhibits all the usual chatter during the login
+# sequence.  If a full pathname, then hushed mode will be enabled if the
+# user's name or shell are found in the file.  If not a full pathname, then
+# hushed mode will be enabled if the file exists in the user's home directory.
+#
+HUSHLOGIN_FILE	.hushlogin
+#HUSHLOGIN_FILE	/etc/hushlogins
+
+#
+# If defined, either a TZ environment parameter spec or the
+# fully-rooted pathname of a file containing such a spec.
+#
+#ENV_TZ		TZ=CST6CDT
+#ENV_TZ		/etc/tzname
+
+#
+# If defined, an HZ environment parameter spec.
+#
+# for Linux/x86
+ENV_HZ		HZ=100
+# For Linux/Alpha...
+#ENV_HZ		HZ=1024
+
+#
+# *REQUIRED*  The default PATH settings, for superuser and normal users.
+#
+# (they are minimal, add the rest in the shell startup files)
+ENV_SUPATH	PATH=/sbin:/bin:/usr/sbin:/usr/bin
+ENV_PATH	PATH=/bin:/usr/bin
+
+#
+# Terminal permissions
+#
+#	TTYGROUP	Login tty will be assigned this group ownership.
+#	TTYPERM		Login tty will be set to this permission.
+#
+# If you have a write(1) program which is "setgid" to a special group
+# which owns the terminals, define TTYGROUP as the number of such group
+# and TTYPERM as 0620.  Otherwise leave TTYGROUP commented out and
+# set TTYPERM to either 622 or 600.
+#
+TTYGROUP	tty
+TTYPERM		0600
+
+#
+# Login configuration initializations:
+#
+#	ERASECHAR	Terminal ERASE character ('\010' = backspace).
+#	KILLCHAR	Terminal KILL character ('\025' = CTRL/U).
+#	ULIMIT		Default "ulimit" value.
+#
+# The ERASECHAR and KILLCHAR are used only on System V machines.
+# The ULIMIT is used only if the system supports it.
+# (now it works with setrlimit too; ulimit is in 512-byte units)
+#
+# Prefix these values with "0" to get octal, "0x" to get hexadecimal.
+#
+ERASECHAR	0177
+KILLCHAR	025
+#ULIMIT		2097152
+
+# Default initial "umask" value used by login(1) on non-PAM enabled systems.
+# Default "umask" value for pam_umask(8) on PAM enabled systems.
+# UMASK is also used by useradd(8) and newusers(8) to set the mode for new
+# home directories if HOME_MODE is not set.
+# 022 is the default value, but 027, or even 077, could be considered
+# for increased privacy. There is no One True Answer here: each sysadmin
+# must make up their mind.
+UMASK		022
+
+# HOME_MODE is used by useradd(8) and newusers(8) to set the mode for new
+# home directories.
+# If HOME_MODE is not set, the value of UMASK is used to create the mode.
+#HOME_MODE	0700
+
+#
+# Password aging controls:
+#
+#	PASS_MAX_DAYS	Maximum number of days a password may be used.
+#	PASS_MIN_DAYS	Minimum number of days allowed between password changes.
+#	PASS_MIN_LEN	Minimum acceptable password length.
+#	PASS_WARN_AGE	Number of days warning given before a password expires.
+#
+PASS_MAX_DAYS	99999
+PASS_MIN_DAYS	0
+PASS_MIN_LEN	5
+PASS_WARN_AGE	7
+
+#
+# If "yes", the user must be listed as a member of the first gid 0 group
+# in /etc/group (called "root" on most Linux systems) to be able to "su"
+# to uid 0 accounts.  If the group doesn't exist or is empty, no one
+# will be able to "su" to uid 0.
+#
+SU_WHEEL_ONLY	no
+
+#
+# If compiled with cracklib support, sets the path to the dictionaries
+#
+CRACKLIB_DICTPATH	/var/cache/cracklib/cracklib_dict
+
+#
+# Min/max values for automatic uid selection in useradd(8)
+#
+UID_MIN			 1000
+UID_MAX			60000
+# System accounts
+SYS_UID_MIN		  101
+SYS_UID_MAX		  999
+# Extra per user uids
+SUB_UID_MIN		   100000
+SUB_UID_MAX		600100000
+SUB_UID_COUNT		    65536
+
+#
+# Min/max values for automatic gid selection in groupadd(8)
+#
+GID_MIN			 1000
+GID_MAX			60000
+# System accounts
+SYS_GID_MIN		  101
+SYS_GID_MAX		  999
+# Extra per user group ids
+SUB_GID_MIN		   100000
+SUB_GID_MAX		600100000
+SUB_GID_COUNT		    65536
+
+#
+# Max number of login(1) retries if password is bad
+#
+LOGIN_RETRIES		5
+
+#
+# Max time in seconds for login(1)
+#
+LOGIN_TIMEOUT		60
+
+#
+# Maximum number of attempts to change password if rejected (too easy)
+#
+PASS_CHANGE_TRIES	5
+
+#
+# Warn about weak passwords (but still allow them) if you are root.
+#
+PASS_ALWAYS_WARN	yes
+
+#
+# Number of significant characters in the password for crypt().
+# Default is 8, don't change unless your crypt() is better.
+# Ignored if MD5_CRYPT_ENAB set to "yes".
+#
+#PASS_MAX_LEN		8
+
+#
+# Require password before chfn(1)/chsh(1) can make any changes.
+#
+CHFN_AUTH		yes
+
+#
+# Which fields may be changed by regular users using chfn(1) - use
+# any combination of letters "frwh" (full name, room number, work
+# phone, home phone).  If not defined, no changes are allowed.
+# For backward compatibility, "yes" = "rwh" and "no" = "frwh".
+#
+CHFN_RESTRICT		rwh
+
+#
+# Password prompt (%s will be replaced by user name).
+#
+# XXX - it doesn't work correctly yet, for now leave it commented out
+# to use the default which is just "Password: ".
+#LOGIN_STRING		"%s's Password: "
+
+#
+# Only works if compiled with MD5_CRYPT defined:
+# If set to "yes", new passwords will be encrypted using the MD5-based
+# algorithm compatible with the one used by recent releases of FreeBSD.
+# It supports passwords of unlimited length and longer salt strings.
+# Set to "no" if you need to copy encrypted passwords to other systems
+# which don't understand the new algorithm.  Default is "no".
+#
+# Note: If you use PAM, it is recommended to use a value consistent with
+# the PAM modules configuration.
+#
+# This variable is deprecated. You should use ENCRYPT_METHOD instead.
+#
+#MD5_CRYPT_ENAB	no
+
+#
+# Only works if compiled with ENCRYPTMETHOD_SELECT defined:
+# If set to MD5, MD5-based algorithm will be used for encrypting password
+# If set to SHA256, SHA256-based algorithm will be used for encrypting password
+# If set to SHA512, SHA512-based algorithm will be used for encrypting password
+# If set to BCRYPT, BCRYPT-based algorithm will be used for encrypting password
+# If set to YESCRYPT, YESCRYPT-based algorithm will be used for encrypting password
+# If set to DES, DES-based algorithm will be used for encrypting password (default)
+# MD5 and DES should not be used for new hashes, see crypt(5) for recommendations.
+# Overrides the MD5_CRYPT_ENAB option
+#
+# Note: If you use PAM, it is recommended to use a value consistent with
+# the PAM modules configuration.
+#
+#ENCRYPT_METHOD DES
+
+#
+# Only works if ENCRYPT_METHOD is set to SHA256 or SHA512.
+#
+# Define the number of SHA rounds.
+# With a lot of rounds, it is more difficult to brute-force the password.
+# However, more CPU resources will be needed to authenticate users if
+# this value is increased.
+#
+# If not specified, the libc will choose the default number of rounds (5000),
+# which is orders of magnitude too low for modern hardware.
+# The values must be within the 1000-999999999 range.
+# If only one of the MIN or MAX values is set, then this value will be used.
+# If MIN > MAX, the highest value will be used.
+#
+#SHA_CRYPT_MIN_ROUNDS 5000
+#SHA_CRYPT_MAX_ROUNDS 5000
+
+#
+# Only works if ENCRYPT_METHOD is set to BCRYPT.
+#
+# Define the number of BCRYPT rounds.
+# With a lot of rounds, it is more difficult to brute-force the password.
+# However, more CPU resources will be needed to authenticate users if
+# this value is increased.
+#
+# If not specified, 13 rounds will be attempted.
+# If only one of the MIN or MAX values is set, then this value will be used.
+# If MIN > MAX, the highest value will be used.
+#
+#BCRYPT_MIN_ROUNDS 13
+#BCRYPT_MAX_ROUNDS 13
+
+#
+# Only works if ENCRYPT_METHOD is set to YESCRYPT.
+#
+# Define the YESCRYPT cost factor.
+# With a higher cost factor, it is more difficult to brute-force the password.
+# However, more CPU time and more memory will be needed to authenticate users
+# if this value is increased.
+#
+# If not specified, a cost factor of 5 will be used.
+# The value must be within the 1-11 range.
+#
+#YESCRYPT_COST_FACTOR 5
+
+#
+# List of groups to add to the user's supplementary group set
+# when logging in from the console (as determined by the CONSOLE
+# setting).  Default is none.
+#
+# Use with caution - it is possible for users to gain permanent
+# access to these groups, even when not logged in from the console.
+# How to do it is left as an exercise for the reader...
+#
+#CONSOLE_GROUPS		floppy:audio:cdrom
+
+#
+# Should login be allowed if we can't cd to the home directory?
+# Default is no.
+#
+DEFAULT_HOME	yes
+
+#
+# The pwck(8) utility emits a warning for any system account with a home
+# directory that does not exist.  Some system accounts intentionally do
+# not have a home directory.  Such accounts may have this string as
+# their home directory in /etc/passwd to avoid a spurious warning.
+#
+NONEXISTENT	/nonexistent
+
+#
+# If this file exists and is readable, login environment will be
+# read from it.  Every line should be in the form name=value.
+#
+ENVIRON_FILE	/etc/environment
+
+#
+# If defined, this command is run when removing a user.
+# It should remove any at/cron/print jobs etc. owned by
+# the user to be removed (passed as the first argument).
+#
+#USERDEL_CMD	/usr/sbin/userdel_local
+
+#
+# Enable setting of the umask group bits to be the same as owner bits
+# (examples: 022 -> 002, 077 -> 007) for non-root users, if the uid is
+# the same as gid, and username is the same as the primary group name.
+#
+# This also enables userdel(8) to remove user groups if no members exist.
+#
+USERGROUPS_ENAB yes
+
+#
+# If set to a non-zero number, the shadow utilities will make sure that
+# groups never have more than this number of users on one line.
+# This permits to support split groups (groups split into multiple lines,
+# with the same group ID, to avoid limitation of the line length in the
+# group file).
+#
+# 0 is the default value and disables this feature.
+#
+#MAX_MEMBERS_PER_GROUP	0
+
+#
+# If useradd(8) should create home directories for users by default (non
+# system users only).
+# This option is overridden with the -M or -m flags on the useradd(8)
+# command-line.
+#
+#CREATE_HOME     yes
+
+#
+# Force use shadow, even if shadow passwd & shadow group files are
+# missing.
+#
+#FORCE_SHADOW    yes
+
+#
+# Allow newuidmap and newgidmap when running under an alternative
+# primary group.
+#
+#GRANT_AUX_GROUP_SUBIDS yes
+
+#
+# Prevents an empty password field to be interpreted as "no authentication
+# required".
+# Set to "yes" to prevent for all accounts
+# Set to "superuser" to prevent for UID 0 / root (default)
+# Set to "no" to not prevent for any account (dangerous, historical default)
+PREVENT_NO_AUTH superuser
+
+#
+# Select the HMAC cryptography algorithm.
+# Used in pam_timestamp module to calculate the keyed-hash message
+# authentication code.
+#
+# Note: It is recommended to check hmac(3) to see the possible algorithms
+# that are available in your system.
+#
+#HMAC_CRYPTO_ALGO SHA512
diff --git a/etc/pam.d/Makefile.am b/etc/pam.d/Makefile.am
new file mode 100644
index 0000000..38ff26a
--- /dev/null
+++ b/etc/pam.d/Makefile.am
@@ -0,0 +1,35 @@
+# This is a dummy Makefile.am to get automake work flawlessly,
+# and also cooperate to make a distribution for `make dist'
+
+pamd_files = \
+	chfn \
+	chsh \
+	groupmems \
+	login \
+	passwd
+
+pamd_acct_tools_files = \
+	chage \
+	chgpasswd \
+	chpasswd \
+	groupadd \
+	groupdel \
+	groupmod \
+	newusers \
+	useradd \
+	userdel \
+	usermod
+
+if USE_PAM
+pamddir = $(sysconfdir)/pam.d
+pamd_DATA = $(pamd_files)
+if ACCT_TOOLS_SETUID
+pamd_DATA += $(pamd_acct_tools_files)
+endif
+endif
+
+if WITH_SU
+pamd_files += su
+endif
+
+EXTRA_DIST = $(pamd_files) $(pamd_acct_tools_files)
diff --git a/etc/pam.d/Makefile.in b/etc/pam.d/Makefile.in
new file mode 100644
index 0000000..187679f
--- /dev/null
+++ b/etc/pam.d/Makefile.in
@@ -0,0 +1,564 @@
+# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# This is a dummy Makefile.am to get automake work flawlessly,
+# and also cooperate to make a distribution for `make dist'
+
+VPATH = @srcdir@
+am__is_gnu_make = { \
+  if test -z '$(MAKELEVEL)'; then \
+    false; \
+  elif test -n '$(MAKE_HOST)'; then \
+    true; \
+  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
+    true; \
+  else \
+    false; \
+  fi; \
+}
+am__make_running_with_option = \
+  case $${target_option-} in \
+      ?) ;; \
+      *) echo "am__make_running_with_option: internal error: invalid" \
+              "target option '$${target_option-}' specified" >&2; \
+         exit 1;; \
+  esac; \
+  has_opt=no; \
+  sane_makeflags=$$MAKEFLAGS; \
+  if $(am__is_gnu_make); then \
+    sane_makeflags=$$MFLAGS; \
+  else \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        bs=\\; \
+        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
+          | sed "s/$$bs$$bs[$$bs $$bs	]*//g"`;; \
+    esac; \
+  fi; \
+  skip_next=no; \
+  strip_trailopt () \
+  { \
+    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
+  }; \
+  for flg in $$sane_makeflags; do \
+    test $$skip_next = yes && { skip_next=no; continue; }; \
+    case $$flg in \
+      *=*|--*) continue;; \
+        -*I) strip_trailopt 'I'; skip_next=yes;; \
+      -*I?*) strip_trailopt 'I';; \
+        -*O) strip_trailopt 'O'; skip_next=yes;; \
+      -*O?*) strip_trailopt 'O';; \
+        -*l) strip_trailopt 'l'; skip_next=yes;; \
+      -*l?*) strip_trailopt 'l';; \
+      -[dEDm]) skip_next=yes;; \
+      -[JT]) skip_next=yes;; \
+    esac; \
+    case $$flg in \
+      *$$target_option*) has_opt=yes; break;; \
+    esac; \
+  done; \
+  test $$has_opt = yes
+am__make_dryrun = (target_option=n; $(am__make_running_with_option))
+am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+build_triplet = @build@
+host_triplet = @host@
+@ACCT_TOOLS_SETUID_TRUE@@USE_PAM_TRUE@am__append_1 = $(pamd_acct_tools_files)
+@WITH_SU_TRUE@am__append_2 = su
+subdir = etc/pam.d
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/m4/gettext.m4 \
+	$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/intlmacosx.m4 \
+	$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
+	$(top_srcdir)/m4/lib-prefix.m4 $(top_srcdir)/m4/libtool.m4 \
+	$(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
+	$(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
+	$(top_srcdir)/m4/nls.m4 $(top_srcdir)/m4/po.m4 \
+	$(top_srcdir)/m4/progtest.m4 $(top_srcdir)/acinclude.m4 \
+	$(top_srcdir)/configure.ac
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON)
+mkinstalldirs = $(install_sh) -d
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+AM_V_P = $(am__v_P_@AM_V@)
+am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
+am__v_P_0 = false
+am__v_P_1 = :
+AM_V_GEN = $(am__v_GEN_@AM_V@)
+am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
+am__v_GEN_0 = @echo "  GEN     " $@;
+am__v_GEN_1 = 
+AM_V_at = $(am__v_at_@AM_V@)
+am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
+am__v_at_0 = @
+am__v_at_1 = 
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(pamddir)"
+DATA = $(pamd_DATA)
+am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
+am__DIST_COMMON = $(srcdir)/Makefile.in
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
+AR = @AR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CSCOPE = @CSCOPE@
+CTAGS = @CTAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+DLLTOOL = @DLLTOOL@
+DSYMUTIL = @DSYMUTIL@
+DUMPBIN = @DUMPBIN@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+ECONF_CPPFLAGS = @ECONF_CPPFLAGS@
+EGREP = @EGREP@
+ETAGS = @ETAGS@
+EXEEXT = @EXEEXT@
+FGREP = @FGREP@
+GETTEXT_MACRO_VERSION = @GETTEXT_MACRO_VERSION@
+GMSGFMT = @GMSGFMT@
+GMSGFMT_015 = @GMSGFMT_015@
+GREP = @GREP@
+GROUP_NAME_MAX_LENGTH = @GROUP_NAME_MAX_LENGTH@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+INTLLIBS = @INTLLIBS@
+INTL_MACOSX_LIBS = @INTL_MACOSX_LIBS@
+LD = @LD@
+LDFLAGS = @LDFLAGS@
+LIBACL = @LIBACL@
+LIBATTR = @LIBATTR@
+LIBAUDIT = @LIBAUDIT@
+LIBCRACK = @LIBCRACK@
+LIBCRYPT = @LIBCRYPT@
+LIBECONF = @LIBECONF@
+LIBICONV = @LIBICONV@
+LIBINTL = @LIBINTL@
+LIBMD = @LIBMD@
+LIBOBJS = @LIBOBJS@
+LIBPAM = @LIBPAM@
+LIBS = @LIBS@
+LIBSELINUX = @LIBSELINUX@
+LIBSEMANAGE = @LIBSEMANAGE@
+LIBSKEY = @LIBSKEY@
+LIBSUBID_ABI = @LIBSUBID_ABI@
+LIBSUBID_ABI_MAJOR = @LIBSUBID_ABI_MAJOR@
+LIBSUBID_ABI_MICRO = @LIBSUBID_ABI_MICRO@
+LIBSUBID_ABI_MINOR = @LIBSUBID_ABI_MINOR@
+LIBTCB = @LIBTCB@
+LIBTOOL = @LIBTOOL@
+LIPO = @LIPO@
+LIYESCRYPT = @LIYESCRYPT@
+LN_S = @LN_S@
+LTLIBICONV = @LTLIBICONV@
+LTLIBINTL = @LTLIBINTL@
+LTLIBOBJS = @LTLIBOBJS@
+LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
+MAINT = @MAINT@
+MAKEINFO = @MAKEINFO@
+MANIFEST_TOOL = @MANIFEST_TOOL@
+MKDIR_P = @MKDIR_P@
+MSGFMT = @MSGFMT@
+MSGFMT_015 = @MSGFMT_015@
+MSGMERGE = @MSGMERGE@
+NM = @NM@
+NMEDIT = @NMEDIT@
+OBJDUMP = @OBJDUMP@
+OBJEXT = @OBJEXT@
+OTOOL = @OTOOL@
+OTOOL64 = @OTOOL64@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+POSUB = @POSUB@
+RANLIB = @RANLIB@
+SED = @SED@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+USE_NLS = @USE_NLS@
+VENDORDIR = @VENDORDIR@
+VERSION = @VERSION@
+XGETTEXT = @XGETTEXT@
+XGETTEXT_015 = @XGETTEXT_015@
+XGETTEXT_EXTRA_OPTIONS = @XGETTEXT_EXTRA_OPTIONS@
+XMLCATALOG = @XMLCATALOG@
+XML_CATALOG_FILE = @XML_CATALOG_FILE@
+XSLTPROC = @XSLTPROC@
+YACC = @YACC@
+YFLAGS = @YFLAGS@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_AR = @ac_ct_AR@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build = @build@
+build_alias = @build_alias@
+build_cpu = @build_cpu@
+build_os = @build_os@
+build_vendor = @build_vendor@
+builddir = @builddir@
+capcmd = @capcmd@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host = @host@
+host_alias = @host_alias@
+host_cpu = @host_cpu@
+host_os = @host_os@
+host_vendor = @host_vendor@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+runstatedir = @runstatedir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+pamd_files = chfn chsh groupmems login passwd $(am__append_2)
+pamd_acct_tools_files = \
+	chage \
+	chgpasswd \
+	chpasswd \
+	groupadd \
+	groupdel \
+	groupmod \
+	newusers \
+	useradd \
+	userdel \
+	usermod
+
+@USE_PAM_TRUE@pamddir = $(sysconfdir)/pam.d
+@USE_PAM_TRUE@pamd_DATA = $(pamd_files) $(am__append_1)
+EXTRA_DIST = $(pamd_files) $(pamd_acct_tools_files)
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign etc/pam.d/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --foreign etc/pam.d/Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+
+mostlyclean-libtool:
+	-rm -f *.lo
+
+clean-libtool:
+	-rm -rf .libs _libs
+install-pamdDATA: $(pamd_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(pamd_DATA)'; test -n "$(pamddir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(pamddir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(pamddir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pamddir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pamddir)" || exit $$?; \
+	done
+
+uninstall-pamdDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(pamd_DATA)'; test -n "$(pamddir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(pamddir)'; $(am__uninstall_files_from_dir)
+tags TAGS:
+
+ctags CTAGS:
+
+cscope cscopelist:
+
+distdir: $(BUILT_SOURCES)
+	$(MAKE) $(AM_MAKEFLAGS) distdir-am
+
+distdir-am: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(pamddir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-libtool mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-pamdDATA
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic mostlyclean-libtool
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-pamdDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-libtool \
+	cscopelist-am ctags-am distclean distclean-generic \
+	distclean-libtool distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pamdDATA install-pdf install-pdf-am install-ps \
+	install-ps-am install-strip installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
+	ps ps-am tags-am uninstall uninstall-am uninstall-pamdDATA
+
+.PRECIOUS: Makefile
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
diff --git a/etc/pam.d/chage b/etc/pam.d/chage
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/chage
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/chfn b/etc/pam.d/chfn
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/chfn
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/chgpasswd b/etc/pam.d/chgpasswd
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/chgpasswd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/chpasswd b/etc/pam.d/chpasswd
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/chpasswd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/chsh b/etc/pam.d/chsh
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/chsh
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/groupadd b/etc/pam.d/groupadd
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/groupadd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/groupdel b/etc/pam.d/groupdel
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/groupdel
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/groupmems b/etc/pam.d/groupmems
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/groupmems
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/groupmod b/etc/pam.d/groupmod
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/groupmod
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/login b/etc/pam.d/login
new file mode 100644
index 0000000..c1649b3
--- /dev/null
+++ b/etc/pam.d/login
@@ -0,0 +1,11 @@
+#%PAM-1.0
+auth		required	pam_securetty.so
+auth		include		system-auth
+account		required	pam_nologin.so
+account		include		system-auth
+password	include		system-auth
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
+session		include		system-auth
+session		required	pam_loginuid.so
+session		optional	pam_console.so
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
diff --git a/etc/pam.d/newusers b/etc/pam.d/newusers
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/newusers
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/passwd b/etc/pam.d/passwd
new file mode 100644
index 0000000..731c0d3
--- /dev/null
+++ b/etc/pam.d/passwd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		include		system-auth
+account		include		system-auth
+password	include		system-auth
diff --git a/etc/pam.d/su b/etc/pam.d/su
new file mode 100644
index 0000000..35602bc
--- /dev/null
+++ b/etc/pam.d/su
@@ -0,0 +1,13 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+# Uncomment the following line to implicitly trust users in the "wheel" group.
+#auth		sufficient	pam_wheel.so trust use_uid
+# Uncomment the following line to require a user to be in the "wheel" group.
+auth		required	pam_wheel.so use_uid
+auth		include		system-auth
+account		include		system-auth
+password	include		system-auth
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so close
+session		include		system-auth
+session [success=ok ignore=ignore module_unknown=ignore default=bad] pam_selinux.so open
+session		optional	pam_xauth.so
diff --git a/etc/pam.d/useradd b/etc/pam.d/useradd
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/useradd
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/userdel b/etc/pam.d/userdel
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/userdel
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth
diff --git a/etc/pam.d/usermod b/etc/pam.d/usermod
new file mode 100644
index 0000000..8f49f5c
--- /dev/null
+++ b/etc/pam.d/usermod
@@ -0,0 +1,4 @@
+#%PAM-1.0
+auth		sufficient	pam_rootok.so
+account		required	pam_permit.so
+password	include		system-auth