diff options
Diffstat (limited to 'smartd.initd.in')
| -rw-r--r-- | smartd.initd.in | 473 |
1 files changed, 473 insertions, 0 deletions
diff --git a/smartd.initd.in b/smartd.initd.in new file mode 100644 index 0000000..81fe224 --- /dev/null +++ b/smartd.initd.in @@ -0,0 +1,473 @@ +#! /bin/sh + +# smartmontools init file for smartd +# Copyright (C) 2002-8 Bruce Allen +# SPDX-License-Identifier: GPL-2.0-or-later +# $Id: smartd.initd.in 4760 2018-08-19 18:45:53Z chrfranke $ + +# For RedHat and cousins: +# chkconfig: 2345 40 40 +# description: Self Monitoring and Reporting Technology (SMART) Daemon +# processname: smartd + +# For SuSE and cousins +### BEGIN INIT INFO +# Provides: smartd +# Required-Start: $syslog $remote_fs +# Should-Start: sendmail +# Required-Stop: $syslog $remote_fs +# Should-Stop: sendmail +# Default-Start: 2 3 5 +# Default-Stop: +# Short-Description: Monitors disk and tape health via S.M.A.R.T. +# Description: Start S.M.A.R.T. disk and tape monitor. +### END INIT INFO + +# Uncomment the line below to pass options to smartd on startup. +# Note that distribution specific configuration files like +# /etc/{default,sysconfig}/smartmontools might override these +#smartd_opts="--interval=1800" + +SMARTD_BIN=/usr/local/sbin/smartd + +report_unsupported () { + echo "Currently the smartmontools package has no init script for" + echo "the $1 OS/distribution. If you can provide one or this" + echo "one works after removing some ifdefs, please contact" + echo "smartmontools-support@listi.jpberlin.de." + exit 1 +} + +# Red Hat or Yellow Dog or Mandrake +if [ -f /etc/redhat-release -o -f /etc/yellowdog-release -o -f /etc/mandrake-release -o -f /etc/whitebox-release -o -f /etc/trustix-release -o -f /etc/tinysofa-release ] ; then + + # Source function library + . /etc/rc.d/init.d/functions + + # Source configuration file. This should define the shell variable smartd_opts + [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools + + RETVAL=0 + + prog=smartd + pidfile=/var/lock/subsys/smartd + config=/etc/smartd.conf + + start() + { + [ $UID -eq 0 ] || exit 4 + [ -x $SMARTD_BIN ] || exit 5 + [ -f $config ] || exit 6 + echo -n $"Starting $prog: " + daemon $SMARTD_BIN $smartd_opts + RETVAL=$? + echo + [ $RETVAL = 0 ] && touch $pidfile + return $RETVAL + } + + stop() + { + [ $UID -eq 0 ] || exit 4 + echo -n $"Shutting down $prog: " + killproc $SMARTD_BIN + RETVAL=$? + echo + rm -f $pidfile + return $RETVAL + } + + reload() + { + echo -n $"Reloading $prog daemon configuration: " + killproc $SMARTD_BIN -HUP + RETVAL=$? + echo + return $RETVAL + } + + report() + { + echo -n $"Checking SMART devices now: " + killproc $SMARTD_BIN -USR1 + RETVAL=$? + echo + return $RETVAL + } + + case "$1" in + start) + start + ;; + stop) + stop + ;; + reload) + reload + ;; + report) + report + ;; + restart) + stop + start + ;; + condrestart|try-restart) + if [ -f $pidfile ]; then + stop + start + fi + ;; + force-reload) + reload || (stop; start) + ;; + status) + status $prog + RETVAL=$? + ;; + *) + echo $"Usage: $0 {start|stop|restart|status|condrestart|try-restart|reload|force-reload|report}" + RETVAL=2 + [ "$1" = 'usage' ] && RETVAL=0 + esac + exit $RETVAL + +# Slackware +elif [ -f /etc/slackware-version ] ; then + + # Source configuration file. This should define the shell variable smartd_opts. + # Email smartmontools-support mailing list if there is a better choice + # of path for Slackware. + + [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools + + RETVAL=0 + case "$1" in + start) + echo -n "Starting smartd: " + $SMARTD_BIN $smartd_opts + RETVAL=$? + echo + ;; + stop) + echo -n "Shutting down smartd: " + killall $SMARTD_BIN + RETVAL=$? + echo + ;; + restart) + $0 stop + sleep 1 + $0 start + RETVAL=$? + ;; + try-restart) + if pidof $SMARTD_BIN >/dev/null; then + $0 restart + RETVAL=$? + fi + ;; + force-reload) + $0 reload || $0 restart + RETVAL=$? + ;; + reload) + echo -n "Reloading smartd configuration: " + killall -s HUP $SMARTD_BIN + RETVAL=$? + echo + ;; + report) + echo -n "Checking SMART devices now: " + killall -s USR1 $SMARTD_BIN + RETVAL=$? + echo + ;; + status) + if pidof $SMARTD_BIN >/dev/null; then + echo "$SMARTD_BIN is running." + else + echo "$SMARTD_BIN is not running." + RETVAL=1 + fi + ;; + *) + echo "Usage: $0 {start|stop|restart|try-restart|force-reload|reload|report|status}" + RETVAL=1 + esac + exit $RETVAL + +# SuSE +elif [ -f /etc/SuSE-release ] ; then + test -x $SMARTD_BIN || exit 5 + + # Existence of config file is optional + SMARTD_CONFIG=/etc/smartd.conf + + # source configuration file. + [ -r /etc/sysconfig/smartmontools ] && . /etc/sysconfig/smartmontools + smartd_opts= + if test -n "$SMARTD_CHECK_INTERVAL" -a "$SMARTD_CHECK_INTERVAL" != 1800 ; then + smartd_opts=" -i $SMARTD_CHECK_INTERVAL" + fi + if test -n "$SMARTD_LOG_FACILITY" -a "$SMARTD_LOG_FACILITY" != "daemon" ; then + smartd_opts="$smartd_opts -l $SMARTD_LOG_FACILITY" + fi + if test -n "$SMARTD_DRIVEDB" ; then + smartd_opts="$smartd_opts -B $SMARTD_DRIVEDB" + fi + if test "$SMARTD_SAVESTATES" = "no" ; then + smartd_opts="$smartd_opts -s \"\"" + fi + if test "$SMARTD_ATTRLOG" = "no" ; then + smartd_opts="$smartd_opts -A \"\"" + fi + if test -n "$SMARTD_EXTRA_OPTS" ; then + smartd_opts="$smartd_opts $SMARTD_EXTRA_OPTS" + fi + + # Shell functions sourced from /etc/rc.status: + # rc_check check and set local and overall rc status + # rc_status check and set local and overall rc status + # rc_status -v be verbose in local rc status and clear it afterwards + # rc_status -v -r ditto and clear both the local and overall rc status + # rc_status -s display "skipped" and exit with status 3 + # rc_status -u display "unused" and exit with status 3 + # rc_failed set local and overall rc status to failed + # rc_failed <num> set local and overall rc status to <num> + # rc_reset clear both the local and overall rc status + # rc_exit exit appropriate to overall rc status + # rc_active checks whether a service is activated by symlinks + . /etc/rc.status + + # Reset status of this service + rc_reset + + # Return values acc. to LSB for all commands but status: + # 0 - success + # 1 - generic or unspecified error + # 2 - invalid or excess argument(s) + # 3 - unimplemented feature (e.g. "reload") + # 4 - user had insufficient privileges + # 5 - program is not installed + # 6 - program is not configured + # 7 - program is not running + # 8--199 - reserved (8--99 LSB, 100--149 distrib, 150--199 appl) + # + # Note that starting an already running service, stopping + # or restarting a not-running service as well as the restart + # with force-reload (in case signaling is not supported) are + # considered a success. + + case "$1" in + start) + echo -n "Starting smartd " + ## Start daemon with startproc(8). If this fails + ## the return value is set appropriately by startproc. + + # We don't use startproc - we need to check for return code 17. + if ! /sbin/checkproc $SMARTD_BIN ; then + eval $SMARTD_BIN$smartd_opts + # Remember status and be verbose + if test $? -ne 17 ; then + rc_status -v + else + rc_status -u + fi + else + rc_reset + rc_status -v + fi + ;; + stop) + echo -n "Shutting down smartd " + /sbin/killproc -TERM $SMARTD_BIN + # Remember status and be verbose + rc_status -v + ;; + try-restart) + ## Do a restart only if the service was active before. + ## Note: try-restart is now part of LSB (as of 1.9). + $0 status + if test $? = 0; then + $0 restart + else + rc_reset # Not running is not a failure. + fi + # Remember status and be quiet + rc_status + ;; + restart) + $0 stop + $0 start + # Remember status and be quiet + rc_status + ;; + force-reload|reload) + echo -n "Reload service smartd " + /sbin/killproc -HUP $SMARTD_BIN + rc_status -v + ;; + report) + ## Checking SMART devices now (smartd specific function) + echo -n "Checking SMART devices now " + /sbin/killproc -USR1 $SMARTD_BIN + rc_status -v + ;; + status) + echo -n "Checking for service smartd " + ## Check status with checkproc(8), if process is running + ## checkproc will return with exit status 0. + + # Return value is slightly different for the status command: + # 0 - service up and running + # 1 - service dead, but /var/run/ pid file exists + # 2 - service dead, but /var/lock/ lock file exists + # 3 - service not running (unused) + # 4 - service status unknown :-( + # 5--199 reserved (5--99 LSB, 100--149 distro, 150--199 appl.) + + # NOTE: checkproc returns LSB compliant status values. + /sbin/checkproc $SMARTD_BIN + rc_status -v + ;; + probe) + ## Optional: Probe for the necessity of a reload, print out the + ## argument to this init script which is required for a reload. + ## Note: probe is not (yet) part of LSB (as of 1.9) + + test $SMARTD_CONFIG -nt /var/run/smartd.pid && echo reload + ;; + *) + echo "Usage: $0 {start|stop|status|try-restart|restart|force-reload|reload|report|probe}" + exit 1 + esac + rc_exit + +# Debian case +elif [ -f /etc/debian_version ] ; then + PATH=/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin + SMARTDPID=/var/run/smartd.pid + [ -x $SMARTD_BIN ] || exit 0 + RET=0 + + # source configuration file + [ -r /etc/default/rcS ] && . /etc/default/rcS + [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools + + smartd_opts="--pidfile $SMARTDPID $smartd_opts" + + case "$1" in + start) + echo -n "Starting S.M.A.R.T. daemon: smartd" + if start-stop-daemon --start --quiet --pidfile $SMARTDPID \ + --exec $SMARTD_BIN -- $smartd_opts; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + stop) + echo -n "Stopping S.M.A.R.T. daemon: smartd" + start-stop-daemon --stop --quiet --oknodo --pidfile $SMARTDPID + echo "." + ;; + restart) + $0 stop + $0 start + ;; + force-reload) + $0 reload || $0 restart + ;; + reload) + echo -n "Reload S.M.A.R.T. daemon: smartd" + if start-stop-daemon --stop --quiet --signal 1 \ + --pidfile $SMARTDPID; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + report) + echo -n "Checking SMART devices now" + if start-stop-daemon --stop --quiet --signal 10 \ + --pidfile $SMARTDPID; then + echo "." + else + echo " (failed)" + RET=1 + fi + ;; + status) + if pidof $SMARTD_BIN >/dev/null; then + echo "$SMARTD_BIN is running." + else + echo "$SMARTD_BIN is not running." + RET=1 + fi + ;; + *) + echo "Usage: $0 {start|stop|restart|force-reload|reload|report|status}" + exit 1 + esac + exit $RET + +elif [ -f /etc/gentoo-release ] ; then + report_unsupported "Gentoo" + +elif [ -f /etc/turbolinux-release ] ; then + report_unsupported "Turbolinux" + +elif [ -f /etc/environment.corel ] ; then + report_unsupported "Corel" + +# PLEASE ADD OTHER LINUX DISTRIBUTIONS JUST BEFORE THIS LINE, USING elif + +elif uname -a | grep SunOS > /dev/null 2>&1 ; then + + # Source configuration file. This should define the shell variable smartd_opts. + # Email smartmontools-support mailing list if there is a better choice + # of path for Solaris + + [ -r /etc/default/smartmontools ] && . /etc/default/smartmontools + + PID_FILE=/var/run/smartd.pid + + case "$1" in + start) + $SMARTD_BIN -p $PID_FILE $smartd_opts + echo -n "smartd " + ;; + stop) + [ -f $PID_FILE ] && kill `cat $PID_FILE` + echo -n "smartd " + ;; + restart) + $0 stop + sleep 1 + $0 start + ;; + reload) + kill -s HUP `cat $PID_FILE` + ;; + report) + kill -s USR1 `cat $PID_FILE` + ;; + *) + echo "Usage: $0 {start|stop|restart|reload|report}" + exit 1 + esac + exit 0 + +# Add other OSes HERE, using elif... +else + report_unsupported "Unknown" +fi + +# One should NEVER arrive here, except for a badly written case above, +# that fails to exit. +echo "SOMETHING IS WRONG WITH THE SMARTD STARTUP SCRIPT" +echo "PLEASE CONTACT smartmontools-support@listi.jpberlin.de" +exit 1 |