diff options
Diffstat (limited to '')
| -rw-r--r-- | src/main.c | 5098 |
1 files changed, 5098 insertions, 0 deletions
diff --git a/src/main.c b/src/main.c new file mode 100644 index 0000000..0342998 --- /dev/null +++ b/src/main.c @@ -0,0 +1,5098 @@ +/* +** 2001 September 15 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** Main file for the SQLite library. The routines in this file +** implement the programmer interface to the library. Routines in +** other files are for internal use by SQLite and should not be +** accessed by users of the library. +*/ +#include "sqliteInt.h" + +#ifdef SQLITE_ENABLE_FTS3 +# include "fts3.h" +#endif +#ifdef SQLITE_ENABLE_RTREE +# include "rtree.h" +#endif +#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS) +# include "sqliteicu.h" +#endif + +/* +** This is an extension initializer that is a no-op and always +** succeeds, except that it fails if the fault-simulation is set +** to 500. +*/ +static int sqlite3TestExtInit(sqlite3 *db){ + (void)db; + return sqlite3FaultSim(500); +} + + +/* +** Forward declarations of external module initializer functions +** for modules that need them. +*/ +#ifdef SQLITE_ENABLE_FTS5 +int sqlite3Fts5Init(sqlite3*); +#endif +#ifdef SQLITE_ENABLE_STMTVTAB +int sqlite3StmtVtabInit(sqlite3*); +#endif +#ifdef SQLITE_EXTRA_AUTOEXT +int SQLITE_EXTRA_AUTOEXT(sqlite3*); +#endif +/* +** An array of pointers to extension initializer functions for +** built-in extensions. +*/ +static int (*const sqlite3BuiltinExtensions[])(sqlite3*) = { +#ifdef SQLITE_ENABLE_FTS3 + sqlite3Fts3Init, +#endif +#ifdef SQLITE_ENABLE_FTS5 + sqlite3Fts5Init, +#endif +#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS) + sqlite3IcuInit, +#endif +#ifdef SQLITE_ENABLE_RTREE + sqlite3RtreeInit, +#endif +#ifdef SQLITE_ENABLE_DBPAGE_VTAB + sqlite3DbpageRegister, +#endif +#ifdef SQLITE_ENABLE_DBSTAT_VTAB + sqlite3DbstatRegister, +#endif + sqlite3TestExtInit, +#if !defined(SQLITE_OMIT_VIRTUALTABLE) && !defined(SQLITE_OMIT_JSON) + sqlite3JsonTableFunctions, +#endif +#ifdef SQLITE_ENABLE_STMTVTAB + sqlite3StmtVtabInit, +#endif +#ifdef SQLITE_ENABLE_BYTECODE_VTAB + sqlite3VdbeBytecodeVtabInit, +#endif +#ifdef SQLITE_EXTRA_AUTOEXT + SQLITE_EXTRA_AUTOEXT, +#endif +}; + +#ifndef SQLITE_AMALGAMATION +/* IMPLEMENTATION-OF: R-46656-45156 The sqlite3_version[] string constant +** contains the text of SQLITE_VERSION macro. +*/ +const char sqlite3_version[] = SQLITE_VERSION; +#endif + +/* IMPLEMENTATION-OF: R-53536-42575 The sqlite3_libversion() function returns +** a pointer to the to the sqlite3_version[] string constant. +*/ +const char *sqlite3_libversion(void){ return sqlite3_version; } + +/* IMPLEMENTATION-OF: R-25063-23286 The sqlite3_sourceid() function returns a +** pointer to a string constant whose value is the same as the +** SQLITE_SOURCE_ID C preprocessor macro. Except if SQLite is built using +** an edited copy of the amalgamation, then the last four characters of +** the hash might be different from SQLITE_SOURCE_ID. +*/ +const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } + +/* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function +** returns an integer equal to SQLITE_VERSION_NUMBER. +*/ +int sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; } + +/* IMPLEMENTATION-OF: R-20790-14025 The sqlite3_threadsafe() function returns +** zero if and only if SQLite was compiled with mutexing code omitted due to +** the SQLITE_THREADSAFE compile-time option being set to 0. +*/ +int sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; } + +/* +** When compiling the test fixture or with debugging enabled (on Win32), +** this variable being set to non-zero will cause OSTRACE macros to emit +** extra diagnostic information. +*/ +#ifdef SQLITE_HAVE_OS_TRACE +# ifndef SQLITE_DEBUG_OS_TRACE +# define SQLITE_DEBUG_OS_TRACE 0 +# endif + int sqlite3OSTrace = SQLITE_DEBUG_OS_TRACE; +#endif + +#if !defined(SQLITE_OMIT_TRACE) && defined(SQLITE_ENABLE_IOTRACE) +/* +** If the following function pointer is not NULL and if +** SQLITE_ENABLE_IOTRACE is enabled, then messages describing +** I/O active are written using this function. These messages +** are intended for debugging activity only. +*/ +SQLITE_API void (SQLITE_CDECL *sqlite3IoTrace)(const char*, ...) = 0; +#endif + +/* +** If the following global variable points to a string which is the +** name of a directory, then that directory will be used to store +** temporary files. +** +** See also the "PRAGMA temp_store_directory" SQL command. +*/ +char *sqlite3_temp_directory = 0; + +/* +** If the following global variable points to a string which is the +** name of a directory, then that directory will be used to store +** all database files specified with a relative pathname. +** +** See also the "PRAGMA data_store_directory" SQL command. +*/ +char *sqlite3_data_directory = 0; + +/* +** Determine whether or not high-precision (long double) floating point +** math works correctly on CPU currently running. +*/ +static SQLITE_NOINLINE int hasHighPrecisionDouble(int rc){ + if( sizeof(LONGDOUBLE_TYPE)<=8 ){ + /* If the size of "long double" is not more than 8, then + ** high-precision math is not possible. */ + return 0; + }else{ + /* Just because sizeof(long double)>8 does not mean that the underlying + ** hardware actually supports high-precision floating point. For example, + ** clearing the 0x100 bit in the floating-point control word on Intel + ** processors will make long double work like double, even though long + ** double takes up more space. The only way to determine if long double + ** actually works is to run an experiment. */ + LONGDOUBLE_TYPE a, b, c; + rc++; + a = 1.0+rc*0.1; + b = 1.0e+18+rc*25.0; + c = a+b; + return b!=c; + } +} + + +/* +** Initialize SQLite. +** +** This routine must be called to initialize the memory allocation, +** VFS, and mutex subsystems prior to doing any serious work with +** SQLite. But as long as you do not compile with SQLITE_OMIT_AUTOINIT +** this routine will be called automatically by key routines such as +** sqlite3_open(). +** +** This routine is a no-op except on its very first call for the process, +** or for the first call after a call to sqlite3_shutdown. +** +** The first thread to call this routine runs the initialization to +** completion. If subsequent threads call this routine before the first +** thread has finished the initialization process, then the subsequent +** threads must block until the first thread finishes with the initialization. +** +** The first thread might call this routine recursively. Recursive +** calls to this routine should not block, of course. Otherwise the +** initialization process would never complete. +** +** Let X be the first thread to enter this routine. Let Y be some other +** thread. Then while the initial invocation of this routine by X is +** incomplete, it is required that: +** +** * Calls to this routine from Y must block until the outer-most +** call by X completes. +** +** * Recursive calls to this routine from thread X return immediately +** without blocking. +*/ +int sqlite3_initialize(void){ + MUTEX_LOGIC( sqlite3_mutex *pMainMtx; ) /* The main static mutex */ + int rc; /* Result code */ +#ifdef SQLITE_EXTRA_INIT + int bRunExtraInit = 0; /* Extra initialization needed */ +#endif + +#ifdef SQLITE_OMIT_WSD + rc = sqlite3_wsd_init(4096, 24); + if( rc!=SQLITE_OK ){ + return rc; + } +#endif + + /* If the following assert() fails on some obscure processor/compiler + ** combination, the work-around is to set the correct pointer + ** size at compile-time using -DSQLITE_PTRSIZE=n compile-time option */ + assert( SQLITE_PTRSIZE==sizeof(char*) ); + + /* If SQLite is already completely initialized, then this call + ** to sqlite3_initialize() should be a no-op. But the initialization + ** must be complete. So isInit must not be set until the very end + ** of this routine. + */ + if( sqlite3GlobalConfig.isInit ){ + sqlite3MemoryBarrier(); + return SQLITE_OK; + } + + /* Make sure the mutex subsystem is initialized. If unable to + ** initialize the mutex subsystem, return early with the error. + ** If the system is so sick that we are unable to allocate a mutex, + ** there is not much SQLite is going to be able to do. + ** + ** The mutex subsystem must take care of serializing its own + ** initialization. + */ + rc = sqlite3MutexInit(); + if( rc ) return rc; + + /* Initialize the malloc() system and the recursive pInitMutex mutex. + ** This operation is protected by the STATIC_MAIN mutex. Note that + ** MutexAlloc() is called for a static mutex prior to initializing the + ** malloc subsystem - this implies that the allocation of a static + ** mutex must not require support from the malloc subsystem. + */ + MUTEX_LOGIC( pMainMtx = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MAIN); ) + sqlite3_mutex_enter(pMainMtx); + sqlite3GlobalConfig.isMutexInit = 1; + if( !sqlite3GlobalConfig.isMallocInit ){ + rc = sqlite3MallocInit(); + } + if( rc==SQLITE_OK ){ + sqlite3GlobalConfig.isMallocInit = 1; + if( !sqlite3GlobalConfig.pInitMutex ){ + sqlite3GlobalConfig.pInitMutex = + sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); + if( sqlite3GlobalConfig.bCoreMutex && !sqlite3GlobalConfig.pInitMutex ){ + rc = SQLITE_NOMEM_BKPT; + } + } + } + if( rc==SQLITE_OK ){ + sqlite3GlobalConfig.nRefInitMutex++; + } + sqlite3_mutex_leave(pMainMtx); + + /* If rc is not SQLITE_OK at this point, then either the malloc + ** subsystem could not be initialized or the system failed to allocate + ** the pInitMutex mutex. Return an error in either case. */ + if( rc!=SQLITE_OK ){ + return rc; + } + + /* Do the rest of the initialization under the recursive mutex so + ** that we will be able to handle recursive calls into + ** sqlite3_initialize(). The recursive calls normally come through + ** sqlite3_os_init() when it invokes sqlite3_vfs_register(), but other + ** recursive calls might also be possible. + ** + ** IMPLEMENTATION-OF: R-00140-37445 SQLite automatically serializes calls + ** to the xInit method, so the xInit method need not be threadsafe. + ** + ** The following mutex is what serializes access to the appdef pcache xInit + ** methods. The sqlite3_pcache_methods.xInit() all is embedded in the + ** call to sqlite3PcacheInitialize(). + */ + sqlite3_mutex_enter(sqlite3GlobalConfig.pInitMutex); + if( sqlite3GlobalConfig.isInit==0 && sqlite3GlobalConfig.inProgress==0 ){ + sqlite3GlobalConfig.inProgress = 1; +#ifdef SQLITE_ENABLE_SQLLOG + { + extern void sqlite3_init_sqllog(void); + sqlite3_init_sqllog(); + } +#endif + memset(&sqlite3BuiltinFunctions, 0, sizeof(sqlite3BuiltinFunctions)); + sqlite3RegisterBuiltinFunctions(); + if( sqlite3GlobalConfig.isPCacheInit==0 ){ + rc = sqlite3PcacheInitialize(); + } + if( rc==SQLITE_OK ){ + sqlite3GlobalConfig.isPCacheInit = 1; + rc = sqlite3OsInit(); + } +#ifndef SQLITE_OMIT_DESERIALIZE + if( rc==SQLITE_OK ){ + rc = sqlite3MemdbInit(); + } +#endif + if( rc==SQLITE_OK ){ + sqlite3PCacheBufferSetup( sqlite3GlobalConfig.pPage, + sqlite3GlobalConfig.szPage, sqlite3GlobalConfig.nPage); + sqlite3MemoryBarrier(); + sqlite3GlobalConfig.isInit = 1; +#ifdef SQLITE_EXTRA_INIT + bRunExtraInit = 1; +#endif + } + sqlite3GlobalConfig.inProgress = 0; + } + sqlite3_mutex_leave(sqlite3GlobalConfig.pInitMutex); + + /* Go back under the static mutex and clean up the recursive + ** mutex to prevent a resource leak. + */ + sqlite3_mutex_enter(pMainMtx); + sqlite3GlobalConfig.nRefInitMutex--; + if( sqlite3GlobalConfig.nRefInitMutex<=0 ){ + assert( sqlite3GlobalConfig.nRefInitMutex==0 ); + sqlite3_mutex_free(sqlite3GlobalConfig.pInitMutex); + sqlite3GlobalConfig.pInitMutex = 0; + } + sqlite3_mutex_leave(pMainMtx); + + /* The following is just a sanity check to make sure SQLite has + ** been compiled correctly. It is important to run this code, but + ** we don't want to run it too often and soak up CPU cycles for no + ** reason. So we run it once during initialization. + */ +#ifndef NDEBUG +#ifndef SQLITE_OMIT_FLOATING_POINT + /* This section of code's only "output" is via assert() statements. */ + if( rc==SQLITE_OK ){ + u64 x = (((u64)1)<<63)-1; + double y; + assert(sizeof(x)==8); + assert(sizeof(x)==sizeof(y)); + memcpy(&y, &x, 8); + assert( sqlite3IsNaN(y) ); + } +#endif +#endif + + /* Do extra initialization steps requested by the SQLITE_EXTRA_INIT + ** compile-time option. + */ +#ifdef SQLITE_EXTRA_INIT + if( bRunExtraInit ){ + int SQLITE_EXTRA_INIT(const char*); + rc = SQLITE_EXTRA_INIT(0); + } +#endif + + /* Experimentally determine if high-precision floating point is + ** available. */ +#ifndef SQLITE_OMIT_WSD + sqlite3Config.bUseLongDouble = hasHighPrecisionDouble(rc); +#endif + + return rc; +} + +/* +** Undo the effects of sqlite3_initialize(). Must not be called while +** there are outstanding database connections or memory allocations or +** while any part of SQLite is otherwise in use in any thread. This +** routine is not threadsafe. But it is safe to invoke this routine +** on when SQLite is already shut down. If SQLite is already shut down +** when this routine is invoked, then this routine is a harmless no-op. +*/ +int sqlite3_shutdown(void){ +#ifdef SQLITE_OMIT_WSD + int rc = sqlite3_wsd_init(4096, 24); + if( rc!=SQLITE_OK ){ + return rc; + } +#endif + + if( sqlite3GlobalConfig.isInit ){ +#ifdef SQLITE_EXTRA_SHUTDOWN + void SQLITE_EXTRA_SHUTDOWN(void); + SQLITE_EXTRA_SHUTDOWN(); +#endif + sqlite3_os_end(); + sqlite3_reset_auto_extension(); + sqlite3GlobalConfig.isInit = 0; + } + if( sqlite3GlobalConfig.isPCacheInit ){ + sqlite3PcacheShutdown(); + sqlite3GlobalConfig.isPCacheInit = 0; + } + if( sqlite3GlobalConfig.isMallocInit ){ + sqlite3MallocEnd(); + sqlite3GlobalConfig.isMallocInit = 0; + +#ifndef SQLITE_OMIT_SHUTDOWN_DIRECTORIES + /* The heap subsystem has now been shutdown and these values are supposed + ** to be NULL or point to memory that was obtained from sqlite3_malloc(), + ** which would rely on that heap subsystem; therefore, make sure these + ** values cannot refer to heap memory that was just invalidated when the + ** heap subsystem was shutdown. This is only done if the current call to + ** this function resulted in the heap subsystem actually being shutdown. + */ + sqlite3_data_directory = 0; + sqlite3_temp_directory = 0; +#endif + } + if( sqlite3GlobalConfig.isMutexInit ){ + sqlite3MutexEnd(); + sqlite3GlobalConfig.isMutexInit = 0; + } + + return SQLITE_OK; +} + +/* +** This API allows applications to modify the global configuration of +** the SQLite library at run-time. +** +** This routine should only be called when there are no outstanding +** database connections or memory allocations. This routine is not +** threadsafe. Failure to heed these warnings can lead to unpredictable +** behavior. +*/ +int sqlite3_config(int op, ...){ + va_list ap; + int rc = SQLITE_OK; + + /* sqlite3_config() normally returns SQLITE_MISUSE if it is invoked while + ** the SQLite library is in use. Except, a few selected opcodes + ** are allowed. + */ + if( sqlite3GlobalConfig.isInit ){ + static const u64 mAnytimeConfigOption = 0 + | MASKBIT64( SQLITE_CONFIG_LOG ) + | MASKBIT64( SQLITE_CONFIG_PCACHE_HDRSZ ) + ; + if( op<0 || op>63 || (MASKBIT64(op) & mAnytimeConfigOption)==0 ){ + return SQLITE_MISUSE_BKPT; + } + testcase( op==SQLITE_CONFIG_LOG ); + testcase( op==SQLITE_CONFIG_PCACHE_HDRSZ ); + } + + va_start(ap, op); + switch( op ){ + + /* Mutex configuration options are only available in a threadsafe + ** compile. + */ +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-54466-46756 */ + case SQLITE_CONFIG_SINGLETHREAD: { + /* EVIDENCE-OF: R-02748-19096 This option sets the threading mode to + ** Single-thread. */ + sqlite3GlobalConfig.bCoreMutex = 0; /* Disable mutex on core */ + sqlite3GlobalConfig.bFullMutex = 0; /* Disable mutex on connections */ + break; + } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-20520-54086 */ + case SQLITE_CONFIG_MULTITHREAD: { + /* EVIDENCE-OF: R-14374-42468 This option sets the threading mode to + ** Multi-thread. */ + sqlite3GlobalConfig.bCoreMutex = 1; /* Enable mutex on core */ + sqlite3GlobalConfig.bFullMutex = 0; /* Disable mutex on connections */ + break; + } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-59593-21810 */ + case SQLITE_CONFIG_SERIALIZED: { + /* EVIDENCE-OF: R-41220-51800 This option sets the threading mode to + ** Serialized. */ + sqlite3GlobalConfig.bCoreMutex = 1; /* Enable mutex on core */ + sqlite3GlobalConfig.bFullMutex = 1; /* Enable mutex on connections */ + break; + } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-63666-48755 */ + case SQLITE_CONFIG_MUTEX: { + /* Specify an alternative mutex implementation */ + sqlite3GlobalConfig.mutex = *va_arg(ap, sqlite3_mutex_methods*); + break; + } +#endif +#if defined(SQLITE_THREADSAFE) && SQLITE_THREADSAFE>0 /* IMP: R-14450-37597 */ + case SQLITE_CONFIG_GETMUTEX: { + /* Retrieve the current mutex implementation */ + *va_arg(ap, sqlite3_mutex_methods*) = sqlite3GlobalConfig.mutex; + break; + } +#endif + + case SQLITE_CONFIG_MALLOC: { + /* EVIDENCE-OF: R-55594-21030 The SQLITE_CONFIG_MALLOC option takes a + ** single argument which is a pointer to an instance of the + ** sqlite3_mem_methods structure. The argument specifies alternative + ** low-level memory allocation routines to be used in place of the memory + ** allocation routines built into SQLite. */ + sqlite3GlobalConfig.m = *va_arg(ap, sqlite3_mem_methods*); + break; + } + case SQLITE_CONFIG_GETMALLOC: { + /* EVIDENCE-OF: R-51213-46414 The SQLITE_CONFIG_GETMALLOC option takes a + ** single argument which is a pointer to an instance of the + ** sqlite3_mem_methods structure. The sqlite3_mem_methods structure is + ** filled with the currently defined memory allocation routines. */ + if( sqlite3GlobalConfig.m.xMalloc==0 ) sqlite3MemSetDefault(); + *va_arg(ap, sqlite3_mem_methods*) = sqlite3GlobalConfig.m; + break; + } + case SQLITE_CONFIG_MEMSTATUS: { + assert( !sqlite3GlobalConfig.isInit ); /* Cannot change at runtime */ + /* EVIDENCE-OF: R-61275-35157 The SQLITE_CONFIG_MEMSTATUS option takes + ** single argument of type int, interpreted as a boolean, which enables + ** or disables the collection of memory allocation statistics. */ + sqlite3GlobalConfig.bMemstat = va_arg(ap, int); + break; + } + case SQLITE_CONFIG_SMALL_MALLOC: { + sqlite3GlobalConfig.bSmallMalloc = va_arg(ap, int); + break; + } + case SQLITE_CONFIG_PAGECACHE: { + /* EVIDENCE-OF: R-18761-36601 There are three arguments to + ** SQLITE_CONFIG_PAGECACHE: A pointer to 8-byte aligned memory (pMem), + ** the size of each page cache line (sz), and the number of cache lines + ** (N). */ + sqlite3GlobalConfig.pPage = va_arg(ap, void*); + sqlite3GlobalConfig.szPage = va_arg(ap, int); + sqlite3GlobalConfig.nPage = va_arg(ap, int); + break; + } + case SQLITE_CONFIG_PCACHE_HDRSZ: { + /* EVIDENCE-OF: R-39100-27317 The SQLITE_CONFIG_PCACHE_HDRSZ option takes + ** a single parameter which is a pointer to an integer and writes into + ** that integer the number of extra bytes per page required for each page + ** in SQLITE_CONFIG_PAGECACHE. */ + *va_arg(ap, int*) = + sqlite3HeaderSizeBtree() + + sqlite3HeaderSizePcache() + + sqlite3HeaderSizePcache1(); + break; + } + + case SQLITE_CONFIG_PCACHE: { + /* no-op */ + break; + } + case SQLITE_CONFIG_GETPCACHE: { + /* now an error */ + rc = SQLITE_ERROR; + break; + } + + case SQLITE_CONFIG_PCACHE2: { + /* EVIDENCE-OF: R-63325-48378 The SQLITE_CONFIG_PCACHE2 option takes a + ** single argument which is a pointer to an sqlite3_pcache_methods2 + ** object. This object specifies the interface to a custom page cache + ** implementation. */ + sqlite3GlobalConfig.pcache2 = *va_arg(ap, sqlite3_pcache_methods2*); + break; + } + case SQLITE_CONFIG_GETPCACHE2: { + /* EVIDENCE-OF: R-22035-46182 The SQLITE_CONFIG_GETPCACHE2 option takes a + ** single argument which is a pointer to an sqlite3_pcache_methods2 + ** object. SQLite copies of the current page cache implementation into + ** that object. */ + if( sqlite3GlobalConfig.pcache2.xInit==0 ){ + sqlite3PCacheSetDefault(); + } + *va_arg(ap, sqlite3_pcache_methods2*) = sqlite3GlobalConfig.pcache2; + break; + } + +/* EVIDENCE-OF: R-06626-12911 The SQLITE_CONFIG_HEAP option is only +** available if SQLite is compiled with either SQLITE_ENABLE_MEMSYS3 or +** SQLITE_ENABLE_MEMSYS5 and returns SQLITE_ERROR if invoked otherwise. */ +#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5) + case SQLITE_CONFIG_HEAP: { + /* EVIDENCE-OF: R-19854-42126 There are three arguments to + ** SQLITE_CONFIG_HEAP: An 8-byte aligned pointer to the memory, the + ** number of bytes in the memory buffer, and the minimum allocation size. + */ + sqlite3GlobalConfig.pHeap = va_arg(ap, void*); + sqlite3GlobalConfig.nHeap = va_arg(ap, int); + sqlite3GlobalConfig.mnReq = va_arg(ap, int); + + if( sqlite3GlobalConfig.mnReq<1 ){ + sqlite3GlobalConfig.mnReq = 1; + }else if( sqlite3GlobalConfig.mnReq>(1<<12) ){ + /* cap min request size at 2^12 */ + sqlite3GlobalConfig.mnReq = (1<<12); + } + + if( sqlite3GlobalConfig.pHeap==0 ){ + /* EVIDENCE-OF: R-49920-60189 If the first pointer (the memory pointer) + ** is NULL, then SQLite reverts to using its default memory allocator + ** (the system malloc() implementation), undoing any prior invocation of + ** SQLITE_CONFIG_MALLOC. + ** + ** Setting sqlite3GlobalConfig.m to all zeros will cause malloc to + ** revert to its default implementation when sqlite3_initialize() is run + */ + memset(&sqlite3GlobalConfig.m, 0, sizeof(sqlite3GlobalConfig.m)); + }else{ + /* EVIDENCE-OF: R-61006-08918 If the memory pointer is not NULL then the + ** alternative memory allocator is engaged to handle all of SQLites + ** memory allocation needs. */ +#ifdef SQLITE_ENABLE_MEMSYS3 + sqlite3GlobalConfig.m = *sqlite3MemGetMemsys3(); +#endif +#ifdef SQLITE_ENABLE_MEMSYS5 + sqlite3GlobalConfig.m = *sqlite3MemGetMemsys5(); +#endif + } + break; + } +#endif + + case SQLITE_CONFIG_LOOKASIDE: { + sqlite3GlobalConfig.szLookaside = va_arg(ap, int); + sqlite3GlobalConfig.nLookaside = va_arg(ap, int); + break; + } + + /* Record a pointer to the logger function and its first argument. + ** The default is NULL. Logging is disabled if the function pointer is + ** NULL. + */ + case SQLITE_CONFIG_LOG: { + /* MSVC is picky about pulling func ptrs from va lists. + ** http://support.microsoft.com/kb/47961 + ** sqlite3GlobalConfig.xLog = va_arg(ap, void(*)(void*,int,const char*)); + */ + typedef void(*LOGFUNC_t)(void*,int,const char*); + LOGFUNC_t xLog = va_arg(ap, LOGFUNC_t); + void *pLogArg = va_arg(ap, void*); + AtomicStore(&sqlite3GlobalConfig.xLog, xLog); + AtomicStore(&sqlite3GlobalConfig.pLogArg, pLogArg); + break; + } + + /* EVIDENCE-OF: R-55548-33817 The compile-time setting for URI filenames + ** can be changed at start-time using the + ** sqlite3_config(SQLITE_CONFIG_URI,1) or + ** sqlite3_config(SQLITE_CONFIG_URI,0) configuration calls. + */ + case SQLITE_CONFIG_URI: { + /* EVIDENCE-OF: R-25451-61125 The SQLITE_CONFIG_URI option takes a single + ** argument of type int. If non-zero, then URI handling is globally + ** enabled. If the parameter is zero, then URI handling is globally + ** disabled. */ + int bOpenUri = va_arg(ap, int); + AtomicStore(&sqlite3GlobalConfig.bOpenUri, bOpenUri); + break; + } + + case SQLITE_CONFIG_COVERING_INDEX_SCAN: { + /* EVIDENCE-OF: R-36592-02772 The SQLITE_CONFIG_COVERING_INDEX_SCAN + ** option takes a single integer argument which is interpreted as a + ** boolean in order to enable or disable the use of covering indices for + ** full table scans in the query optimizer. */ + sqlite3GlobalConfig.bUseCis = va_arg(ap, int); + break; + } + +#ifdef SQLITE_ENABLE_SQLLOG + case SQLITE_CONFIG_SQLLOG: { + typedef void(*SQLLOGFUNC_t)(void*, sqlite3*, const char*, int); + sqlite3GlobalConfig.xSqllog = va_arg(ap, SQLLOGFUNC_t); + sqlite3GlobalConfig.pSqllogArg = va_arg(ap, void *); + break; + } +#endif + + case SQLITE_CONFIG_MMAP_SIZE: { + /* EVIDENCE-OF: R-58063-38258 SQLITE_CONFIG_MMAP_SIZE takes two 64-bit + ** integer (sqlite3_int64) values that are the default mmap size limit + ** (the default setting for PRAGMA mmap_size) and the maximum allowed + ** mmap size limit. */ + sqlite3_int64 szMmap = va_arg(ap, sqlite3_int64); + sqlite3_int64 mxMmap = va_arg(ap, sqlite3_int64); + /* EVIDENCE-OF: R-53367-43190 If either argument to this option is + ** negative, then that argument is changed to its compile-time default. + ** + ** EVIDENCE-OF: R-34993-45031 The maximum allowed mmap size will be + ** silently truncated if necessary so that it does not exceed the + ** compile-time maximum mmap size set by the SQLITE_MAX_MMAP_SIZE + ** compile-time option. + */ + if( mxMmap<0 || mxMmap>SQLITE_MAX_MMAP_SIZE ){ + mxMmap = SQLITE_MAX_MMAP_SIZE; + } + if( szMmap<0 ) szMmap = SQLITE_DEFAULT_MMAP_SIZE; + if( szMmap>mxMmap) szMmap = mxMmap; + sqlite3GlobalConfig.mxMmap = mxMmap; + sqlite3GlobalConfig.szMmap = szMmap; + break; + } + +#if SQLITE_OS_WIN && defined(SQLITE_WIN32_MALLOC) /* IMP: R-04780-55815 */ + case SQLITE_CONFIG_WIN32_HEAPSIZE: { + /* EVIDENCE-OF: R-34926-03360 SQLITE_CONFIG_WIN32_HEAPSIZE takes a 32-bit + ** unsigned integer value that specifies the maximum size of the created + ** heap. */ + sqlite3GlobalConfig.nHeap = va_arg(ap, int); + break; + } +#endif + + case SQLITE_CONFIG_PMASZ: { + sqlite3GlobalConfig.szPma = va_arg(ap, unsigned int); + break; + } + + case SQLITE_CONFIG_STMTJRNL_SPILL: { + sqlite3GlobalConfig.nStmtSpill = va_arg(ap, int); + break; + } + +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + case SQLITE_CONFIG_SORTERREF_SIZE: { + int iVal = va_arg(ap, int); + if( iVal<0 ){ + iVal = SQLITE_DEFAULT_SORTERREF_SIZE; + } + sqlite3GlobalConfig.szSorterRef = (u32)iVal; + break; + } +#endif /* SQLITE_ENABLE_SORTER_REFERENCES */ + +#ifndef SQLITE_OMIT_DESERIALIZE + case SQLITE_CONFIG_MEMDB_MAXSIZE: { + sqlite3GlobalConfig.mxMemdbSize = va_arg(ap, sqlite3_int64); + break; + } +#endif /* SQLITE_OMIT_DESERIALIZE */ + + default: { + rc = SQLITE_ERROR; + break; + } + } + va_end(ap); + return rc; +} + +/* +** Set up the lookaside buffers for a database connection. +** Return SQLITE_OK on success. +** If lookaside is already active, return SQLITE_BUSY. +** +** The sz parameter is the number of bytes in each lookaside slot. +** The cnt parameter is the number of slots. If pStart is NULL the +** space for the lookaside memory is obtained from sqlite3_malloc(). +** If pStart is not NULL then it is sz*cnt bytes of memory to use for +** the lookaside memory. +*/ +static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ +#ifndef SQLITE_OMIT_LOOKASIDE + void *pStart; + sqlite3_int64 szAlloc = sz*(sqlite3_int64)cnt; + int nBig; /* Number of full-size slots */ + int nSm; /* Number smaller LOOKASIDE_SMALL-byte slots */ + + if( sqlite3LookasideUsed(db,0)>0 ){ + return SQLITE_BUSY; + } + /* Free any existing lookaside buffer for this handle before + ** allocating a new one so we don't have to have space for + ** both at the same time. + */ + if( db->lookaside.bMalloced ){ + sqlite3_free(db->lookaside.pStart); + } + /* The size of a lookaside slot after ROUNDDOWN8 needs to be larger + ** than a pointer to be useful. + */ + sz = ROUNDDOWN8(sz); /* IMP: R-33038-09382 */ + if( sz<=(int)sizeof(LookasideSlot*) ) sz = 0; + if( cnt<0 ) cnt = 0; + if( sz==0 || cnt==0 ){ + sz = 0; + pStart = 0; + }else if( pBuf==0 ){ + sqlite3BeginBenignMalloc(); + pStart = sqlite3Malloc( szAlloc ); /* IMP: R-61949-35727 */ + sqlite3EndBenignMalloc(); + if( pStart ) szAlloc = sqlite3MallocSize(pStart); + }else{ + pStart = pBuf; + } +#ifndef SQLITE_OMIT_TWOSIZE_LOOKASIDE + if( sz>=LOOKASIDE_SMALL*3 ){ + nBig = szAlloc/(3*LOOKASIDE_SMALL+sz); + nSm = (szAlloc - sz*nBig)/LOOKASIDE_SMALL; + }else if( sz>=LOOKASIDE_SMALL*2 ){ + nBig = szAlloc/(LOOKASIDE_SMALL+sz); + nSm = (szAlloc - sz*nBig)/LOOKASIDE_SMALL; + }else +#endif /* SQLITE_OMIT_TWOSIZE_LOOKASIDE */ + if( sz>0 ){ + nBig = szAlloc/sz; + nSm = 0; + }else{ + nBig = nSm = 0; + } + db->lookaside.pStart = pStart; + db->lookaside.pInit = 0; + db->lookaside.pFree = 0; + db->lookaside.sz = (u16)sz; + db->lookaside.szTrue = (u16)sz; + if( pStart ){ + int i; + LookasideSlot *p; + assert( sz > (int)sizeof(LookasideSlot*) ); + p = (LookasideSlot*)pStart; + for(i=0; i<nBig; i++){ + p->pNext = db->lookaside.pInit; + db->lookaside.pInit = p; + p = (LookasideSlot*)&((u8*)p)[sz]; + } +#ifndef SQLITE_OMIT_TWOSIZE_LOOKASIDE + db->lookaside.pSmallInit = 0; + db->lookaside.pSmallFree = 0; + db->lookaside.pMiddle = p; + for(i=0; i<nSm; i++){ + p->pNext = db->lookaside.pSmallInit; + db->lookaside.pSmallInit = p; + p = (LookasideSlot*)&((u8*)p)[LOOKASIDE_SMALL]; + } +#endif /* SQLITE_OMIT_TWOSIZE_LOOKASIDE */ + assert( ((uptr)p)<=szAlloc + (uptr)pStart ); + db->lookaside.pEnd = p; + db->lookaside.bDisable = 0; + db->lookaside.bMalloced = pBuf==0 ?1:0; + db->lookaside.nSlot = nBig+nSm; + }else{ + db->lookaside.pStart = 0; +#ifndef SQLITE_OMIT_TWOSIZE_LOOKASIDE + db->lookaside.pSmallInit = 0; + db->lookaside.pSmallFree = 0; + db->lookaside.pMiddle = 0; +#endif /* SQLITE_OMIT_TWOSIZE_LOOKASIDE */ + db->lookaside.pEnd = 0; + db->lookaside.bDisable = 1; + db->lookaside.sz = 0; + db->lookaside.bMalloced = 0; + db->lookaside.nSlot = 0; + } + db->lookaside.pTrueEnd = db->lookaside.pEnd; + assert( sqlite3LookasideUsed(db,0)==0 ); +#endif /* SQLITE_OMIT_LOOKASIDE */ + return SQLITE_OK; +} + +/* +** Return the mutex associated with a database connection. +*/ +sqlite3_mutex *sqlite3_db_mutex(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + return db->mutex; +} + +/* +** Free up as much memory as we can from the given database +** connection. +*/ +int sqlite3_db_release_memory(sqlite3 *db){ + int i; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + for(i=0; i<db->nDb; i++){ + Btree *pBt = db->aDb[i].pBt; + if( pBt ){ + Pager *pPager = sqlite3BtreePager(pBt); + sqlite3PagerShrink(pPager); + } + } + sqlite3BtreeLeaveAll(db); + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + +/* +** Flush any dirty pages in the pager-cache for any attached database +** to disk. +*/ +int sqlite3_db_cacheflush(sqlite3 *db){ + int i; + int rc = SQLITE_OK; + int bSeenBusy = 0; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + for(i=0; rc==SQLITE_OK && i<db->nDb; i++){ + Btree *pBt = db->aDb[i].pBt; + if( pBt && sqlite3BtreeTxnState(pBt)==SQLITE_TXN_WRITE ){ + Pager *pPager = sqlite3BtreePager(pBt); + rc = sqlite3PagerFlush(pPager); + if( rc==SQLITE_BUSY ){ + bSeenBusy = 1; + rc = SQLITE_OK; + } + } + } + sqlite3BtreeLeaveAll(db); + sqlite3_mutex_leave(db->mutex); + return ((rc==SQLITE_OK && bSeenBusy) ? SQLITE_BUSY : rc); +} + +/* +** Configuration settings for an individual database connection +*/ +int sqlite3_db_config(sqlite3 *db, int op, ...){ + va_list ap; + int rc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + va_start(ap, op); + switch( op ){ + case SQLITE_DBCONFIG_MAINDBNAME: { + /* IMP: R-06824-28531 */ + /* IMP: R-36257-52125 */ + db->aDb[0].zDbSName = va_arg(ap,char*); + rc = SQLITE_OK; + break; + } + case SQLITE_DBCONFIG_LOOKASIDE: { + void *pBuf = va_arg(ap, void*); /* IMP: R-26835-10964 */ + int sz = va_arg(ap, int); /* IMP: R-47871-25994 */ + int cnt = va_arg(ap, int); /* IMP: R-04460-53386 */ + rc = setupLookaside(db, pBuf, sz, cnt); + break; + } + default: { + static const struct { + int op; /* The opcode */ + u32 mask; /* Mask of the bit in sqlite3.flags to set/clear */ + } aFlagOp[] = { + { SQLITE_DBCONFIG_ENABLE_FKEY, SQLITE_ForeignKeys }, + { SQLITE_DBCONFIG_ENABLE_TRIGGER, SQLITE_EnableTrigger }, + { SQLITE_DBCONFIG_ENABLE_VIEW, SQLITE_EnableView }, + { SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER, SQLITE_Fts3Tokenizer }, + { SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, SQLITE_LoadExtension }, + { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE, SQLITE_NoCkptOnClose }, + { SQLITE_DBCONFIG_ENABLE_QPSG, SQLITE_EnableQPSG }, + { SQLITE_DBCONFIG_TRIGGER_EQP, SQLITE_TriggerEQP }, + { SQLITE_DBCONFIG_RESET_DATABASE, SQLITE_ResetDatabase }, + { SQLITE_DBCONFIG_DEFENSIVE, SQLITE_Defensive }, + { SQLITE_DBCONFIG_WRITABLE_SCHEMA, SQLITE_WriteSchema| + SQLITE_NoSchemaError }, + { SQLITE_DBCONFIG_LEGACY_ALTER_TABLE, SQLITE_LegacyAlter }, + { SQLITE_DBCONFIG_DQS_DDL, SQLITE_DqsDDL }, + { SQLITE_DBCONFIG_DQS_DML, SQLITE_DqsDML }, + { SQLITE_DBCONFIG_LEGACY_FILE_FORMAT, SQLITE_LegacyFileFmt }, + { SQLITE_DBCONFIG_TRUSTED_SCHEMA, SQLITE_TrustedSchema }, + { SQLITE_DBCONFIG_STMT_SCANSTATUS, SQLITE_StmtScanStatus }, + { SQLITE_DBCONFIG_REVERSE_SCANORDER, SQLITE_ReverseOrder }, + }; + unsigned int i; + rc = SQLITE_ERROR; /* IMP: R-42790-23372 */ + for(i=0; i<ArraySize(aFlagOp); i++){ + if( aFlagOp[i].op==op ){ + int onoff = va_arg(ap, int); + int *pRes = va_arg(ap, int*); + u64 oldFlags = db->flags; + if( onoff>0 ){ + db->flags |= aFlagOp[i].mask; + }else if( onoff==0 ){ + db->flags &= ~(u64)aFlagOp[i].mask; + } + if( oldFlags!=db->flags ){ + sqlite3ExpirePreparedStatements(db, 0); + } + if( pRes ){ + *pRes = (db->flags & aFlagOp[i].mask)!=0; + } + rc = SQLITE_OK; + break; + } + } + break; + } + } + va_end(ap); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** This is the default collating function named "BINARY" which is always +** available. +*/ +static int binCollFunc( + void *NotUsed, + int nKey1, const void *pKey1, + int nKey2, const void *pKey2 +){ + int rc, n; + UNUSED_PARAMETER(NotUsed); + n = nKey1<nKey2 ? nKey1 : nKey2; + /* EVIDENCE-OF: R-65033-28449 The built-in BINARY collation compares + ** strings byte by byte using the memcmp() function from the standard C + ** library. */ + assert( pKey1 && pKey2 ); + rc = memcmp(pKey1, pKey2, n); + if( rc==0 ){ + rc = nKey1 - nKey2; + } + return rc; +} + +/* +** This is the collating function named "RTRIM" which is always +** available. Ignore trailing spaces. +*/ +static int rtrimCollFunc( + void *pUser, + int nKey1, const void *pKey1, + int nKey2, const void *pKey2 +){ + const u8 *pK1 = (const u8*)pKey1; + const u8 *pK2 = (const u8*)pKey2; + while( nKey1 && pK1[nKey1-1]==' ' ) nKey1--; + while( nKey2 && pK2[nKey2-1]==' ' ) nKey2--; + return binCollFunc(pUser, nKey1, pKey1, nKey2, pKey2); +} + +/* +** Return true if CollSeq is the default built-in BINARY. +*/ +int sqlite3IsBinary(const CollSeq *p){ + assert( p==0 || p->xCmp!=binCollFunc || strcmp(p->zName,"BINARY")==0 ); + return p==0 || p->xCmp==binCollFunc; +} + +/* +** Another built-in collating sequence: NOCASE. +** +** This collating sequence is intended to be used for "case independent +** comparison". SQLite's knowledge of upper and lower case equivalents +** extends only to the 26 characters used in the English language. +** +** At the moment there is only a UTF-8 implementation. +*/ +static int nocaseCollatingFunc( + void *NotUsed, + int nKey1, const void *pKey1, + int nKey2, const void *pKey2 +){ + int r = sqlite3StrNICmp( + (const char *)pKey1, (const char *)pKey2, (nKey1<nKey2)?nKey1:nKey2); + UNUSED_PARAMETER(NotUsed); + if( 0==r ){ + r = nKey1-nKey2; + } + return r; +} + +/* +** Return the ROWID of the most recent insert +*/ +sqlite_int64 sqlite3_last_insert_rowid(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + return db->lastRowid; +} + +/* +** Set the value returned by the sqlite3_last_insert_rowid() API function. +*/ +void sqlite3_set_last_insert_rowid(sqlite3 *db, sqlite3_int64 iRowid){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return; + } +#endif + sqlite3_mutex_enter(db->mutex); + db->lastRowid = iRowid; + sqlite3_mutex_leave(db->mutex); +} + +/* +** Return the number of changes in the most recent call to sqlite3_exec(). +*/ +sqlite3_int64 sqlite3_changes64(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + return db->nChange; +} +int sqlite3_changes(sqlite3 *db){ + return (int)sqlite3_changes64(db); +} + +/* +** Return the number of changes since the database handle was opened. +*/ +sqlite3_int64 sqlite3_total_changes64(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + return db->nTotalChange; +} +int sqlite3_total_changes(sqlite3 *db){ + return (int)sqlite3_total_changes64(db); +} + +/* +** Close all open savepoints. This function only manipulates fields of the +** database handle object, it does not close any savepoints that may be open +** at the b-tree/pager level. +*/ +void sqlite3CloseSavepoints(sqlite3 *db){ + while( db->pSavepoint ){ + Savepoint *pTmp = db->pSavepoint; + db->pSavepoint = pTmp->pNext; + sqlite3DbFree(db, pTmp); + } + db->nSavepoint = 0; + db->nStatement = 0; + db->isTransactionSavepoint = 0; +} + +/* +** Invoke the destructor function associated with FuncDef p, if any. Except, +** if this is not the last copy of the function, do not invoke it. Multiple +** copies of a single function are created when create_function() is called +** with SQLITE_ANY as the encoding. +*/ +static void functionDestroy(sqlite3 *db, FuncDef *p){ + FuncDestructor *pDestructor; + assert( (p->funcFlags & SQLITE_FUNC_BUILTIN)==0 ); + pDestructor = p->u.pDestructor; + if( pDestructor ){ + pDestructor->nRef--; + if( pDestructor->nRef==0 ){ + pDestructor->xDestroy(pDestructor->pUserData); + sqlite3DbFree(db, pDestructor); + } + } +} + +/* +** Disconnect all sqlite3_vtab objects that belong to database connection +** db. This is called when db is being closed. +*/ +static void disconnectAllVtab(sqlite3 *db){ +#ifndef SQLITE_OMIT_VIRTUALTABLE + int i; + HashElem *p; + sqlite3BtreeEnterAll(db); + for(i=0; i<db->nDb; i++){ + Schema *pSchema = db->aDb[i].pSchema; + if( pSchema ){ + for(p=sqliteHashFirst(&pSchema->tblHash); p; p=sqliteHashNext(p)){ + Table *pTab = (Table *)sqliteHashData(p); + if( IsVirtual(pTab) ) sqlite3VtabDisconnect(db, pTab); + } + } + } + for(p=sqliteHashFirst(&db->aModule); p; p=sqliteHashNext(p)){ + Module *pMod = (Module *)sqliteHashData(p); + if( pMod->pEpoTab ){ + sqlite3VtabDisconnect(db, pMod->pEpoTab); + } + } + sqlite3VtabUnlockList(db); + sqlite3BtreeLeaveAll(db); +#else + UNUSED_PARAMETER(db); +#endif +} + +/* +** Return TRUE if database connection db has unfinalized prepared +** statements or unfinished sqlite3_backup objects. +*/ +static int connectionIsBusy(sqlite3 *db){ + int j; + assert( sqlite3_mutex_held(db->mutex) ); + if( db->pVdbe ) return 1; + for(j=0; j<db->nDb; j++){ + Btree *pBt = db->aDb[j].pBt; + if( pBt && sqlite3BtreeIsInBackup(pBt) ) return 1; + } + return 0; +} + +/* +** Close an existing SQLite database +*/ +static int sqlite3Close(sqlite3 *db, int forceZombie){ + if( !db ){ + /* EVIDENCE-OF: R-63257-11740 Calling sqlite3_close() or + ** sqlite3_close_v2() with a NULL pointer argument is a harmless no-op. */ + return SQLITE_OK; + } + if( !sqlite3SafetyCheckSickOrOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + sqlite3_mutex_enter(db->mutex); + if( db->mTrace & SQLITE_TRACE_CLOSE ){ + db->trace.xV2(SQLITE_TRACE_CLOSE, db->pTraceArg, db, 0); + } + + /* Force xDisconnect calls on all virtual tables */ + disconnectAllVtab(db); + + /* If a transaction is open, the disconnectAllVtab() call above + ** will not have called the xDisconnect() method on any virtual + ** tables in the db->aVTrans[] array. The following sqlite3VtabRollback() + ** call will do so. We need to do this before the check for active + ** SQL statements below, as the v-table implementation may be storing + ** some prepared statements internally. + */ + sqlite3VtabRollback(db); + + /* Legacy behavior (sqlite3_close() behavior) is to return + ** SQLITE_BUSY if the connection can not be closed immediately. + */ + if( !forceZombie && connectionIsBusy(db) ){ + sqlite3ErrorWithMsg(db, SQLITE_BUSY, "unable to close due to unfinalized " + "statements or unfinished backups"); + sqlite3_mutex_leave(db->mutex); + return SQLITE_BUSY; + } + +#ifdef SQLITE_ENABLE_SQLLOG + if( sqlite3GlobalConfig.xSqllog ){ + /* Closing the handle. Fourth parameter is passed the value 2. */ + sqlite3GlobalConfig.xSqllog(sqlite3GlobalConfig.pSqllogArg, db, 0, 2); + } +#endif + + while( db->pDbData ){ + DbClientData *p = db->pDbData; + db->pDbData = p->pNext; + assert( p->pData!=0 ); + if( p->xDestructor ) p->xDestructor(p->pData); + sqlite3_free(p); + } + + /* Convert the connection into a zombie and then close it. + */ + db->eOpenState = SQLITE_STATE_ZOMBIE; + sqlite3LeaveMutexAndCloseZombie(db); + return SQLITE_OK; +} + +/* +** Return the transaction state for a single databse, or the maximum +** transaction state over all attached databases if zSchema is null. +*/ +int sqlite3_txn_state(sqlite3 *db, const char *zSchema){ + int iDb, nDb; + int iTxn = -1; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return -1; + } +#endif + sqlite3_mutex_enter(db->mutex); + if( zSchema ){ + nDb = iDb = sqlite3FindDbName(db, zSchema); + if( iDb<0 ) nDb--; + }else{ + iDb = 0; + nDb = db->nDb-1; + } + for(; iDb<=nDb; iDb++){ + Btree *pBt = db->aDb[iDb].pBt; + int x = pBt!=0 ? sqlite3BtreeTxnState(pBt) : SQLITE_TXN_NONE; + if( x>iTxn ) iTxn = x; + } + sqlite3_mutex_leave(db->mutex); + return iTxn; +} + +/* +** Two variations on the public interface for closing a database +** connection. The sqlite3_close() version returns SQLITE_BUSY and +** leaves the connection open if there are unfinalized prepared +** statements or unfinished sqlite3_backups. The sqlite3_close_v2() +** version forces the connection to become a zombie if there are +** unclosed resources, and arranges for deallocation when the last +** prepare statement or sqlite3_backup closes. +*/ +int sqlite3_close(sqlite3 *db){ return sqlite3Close(db,0); } +int sqlite3_close_v2(sqlite3 *db){ return sqlite3Close(db,1); } + + +/* +** Close the mutex on database connection db. +** +** Furthermore, if database connection db is a zombie (meaning that there +** has been a prior call to sqlite3_close(db) or sqlite3_close_v2(db)) and +** every sqlite3_stmt has now been finalized and every sqlite3_backup has +** finished, then free all resources. +*/ +void sqlite3LeaveMutexAndCloseZombie(sqlite3 *db){ + HashElem *i; /* Hash table iterator */ + int j; + + /* If there are outstanding sqlite3_stmt or sqlite3_backup objects + ** or if the connection has not yet been closed by sqlite3_close_v2(), + ** then just leave the mutex and return. + */ + if( db->eOpenState!=SQLITE_STATE_ZOMBIE || connectionIsBusy(db) ){ + sqlite3_mutex_leave(db->mutex); + return; + } + + /* If we reach this point, it means that the database connection has + ** closed all sqlite3_stmt and sqlite3_backup objects and has been + ** passed to sqlite3_close (meaning that it is a zombie). Therefore, + ** go ahead and free all resources. + */ + + /* If a transaction is open, roll it back. This also ensures that if + ** any database schemas have been modified by an uncommitted transaction + ** they are reset. And that the required b-tree mutex is held to make + ** the pager rollback and schema reset an atomic operation. */ + sqlite3RollbackAll(db, SQLITE_OK); + + /* Free any outstanding Savepoint structures. */ + sqlite3CloseSavepoints(db); + + /* Close all database connections */ + for(j=0; j<db->nDb; j++){ + struct Db *pDb = &db->aDb[j]; + if( pDb->pBt ){ + sqlite3BtreeClose(pDb->pBt); + pDb->pBt = 0; + if( j!=1 ){ + pDb->pSchema = 0; + } + } + } + /* Clear the TEMP schema separately and last */ + if( db->aDb[1].pSchema ){ + sqlite3SchemaClear(db->aDb[1].pSchema); + } + sqlite3VtabUnlockList(db); + + /* Free up the array of auxiliary databases */ + sqlite3CollapseDatabaseArray(db); + assert( db->nDb<=2 ); + assert( db->aDb==db->aDbStatic ); + + /* Tell the code in notify.c that the connection no longer holds any + ** locks and does not require any further unlock-notify callbacks. + */ + sqlite3ConnectionClosed(db); + + for(i=sqliteHashFirst(&db->aFunc); i; i=sqliteHashNext(i)){ + FuncDef *pNext, *p; + p = sqliteHashData(i); + do{ + functionDestroy(db, p); + pNext = p->pNext; + sqlite3DbFree(db, p); + p = pNext; + }while( p ); + } + sqlite3HashClear(&db->aFunc); + for(i=sqliteHashFirst(&db->aCollSeq); i; i=sqliteHashNext(i)){ + CollSeq *pColl = (CollSeq *)sqliteHashData(i); + /* Invoke any destructors registered for collation sequence user data. */ + for(j=0; j<3; j++){ + if( pColl[j].xDel ){ + pColl[j].xDel(pColl[j].pUser); + } + } + sqlite3DbFree(db, pColl); + } + sqlite3HashClear(&db->aCollSeq); +#ifndef SQLITE_OMIT_VIRTUALTABLE + for(i=sqliteHashFirst(&db->aModule); i; i=sqliteHashNext(i)){ + Module *pMod = (Module *)sqliteHashData(i); + sqlite3VtabEponymousTableClear(db, pMod); + sqlite3VtabModuleUnref(db, pMod); + } + sqlite3HashClear(&db->aModule); +#endif + + sqlite3Error(db, SQLITE_OK); /* Deallocates any cached error strings. */ + sqlite3ValueFree(db->pErr); + sqlite3CloseExtensions(db); +#if SQLITE_USER_AUTHENTICATION + sqlite3_free(db->auth.zAuthUser); + sqlite3_free(db->auth.zAuthPW); +#endif + + db->eOpenState = SQLITE_STATE_ERROR; + + /* The temp-database schema is allocated differently from the other schema + ** objects (using sqliteMalloc() directly, instead of sqlite3BtreeSchema()). + ** So it needs to be freed here. Todo: Why not roll the temp schema into + ** the same sqliteMalloc() as the one that allocates the database + ** structure? + */ + sqlite3DbFree(db, db->aDb[1].pSchema); + if( db->xAutovacDestr ){ + db->xAutovacDestr(db->pAutovacPagesArg); + } + sqlite3_mutex_leave(db->mutex); + db->eOpenState = SQLITE_STATE_CLOSED; + sqlite3_mutex_free(db->mutex); + assert( sqlite3LookasideUsed(db,0)==0 ); + if( db->lookaside.bMalloced ){ + sqlite3_free(db->lookaside.pStart); + } + sqlite3_free(db); +} + +/* +** Rollback all database files. If tripCode is not SQLITE_OK, then +** any write cursors are invalidated ("tripped" - as in "tripping a circuit +** breaker") and made to return tripCode if there are any further +** attempts to use that cursor. Read cursors remain open and valid +** but are "saved" in case the table pages are moved around. +*/ +void sqlite3RollbackAll(sqlite3 *db, int tripCode){ + int i; + int inTrans = 0; + int schemaChange; + assert( sqlite3_mutex_held(db->mutex) ); + sqlite3BeginBenignMalloc(); + + /* Obtain all b-tree mutexes before making any calls to BtreeRollback(). + ** This is important in case the transaction being rolled back has + ** modified the database schema. If the b-tree mutexes are not taken + ** here, then another shared-cache connection might sneak in between + ** the database rollback and schema reset, which can cause false + ** corruption reports in some cases. */ + sqlite3BtreeEnterAll(db); + schemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0 && db->init.busy==0; + + for(i=0; i<db->nDb; i++){ + Btree *p = db->aDb[i].pBt; + if( p ){ + if( sqlite3BtreeTxnState(p)==SQLITE_TXN_WRITE ){ + inTrans = 1; + } + sqlite3BtreeRollback(p, tripCode, !schemaChange); + } + } + sqlite3VtabRollback(db); + sqlite3EndBenignMalloc(); + + if( schemaChange ){ + sqlite3ExpirePreparedStatements(db, 0); + sqlite3ResetAllSchemasOfConnection(db); + } + sqlite3BtreeLeaveAll(db); + + /* Any deferred constraint violations have now been resolved. */ + db->nDeferredCons = 0; + db->nDeferredImmCons = 0; + db->flags &= ~(u64)(SQLITE_DeferFKs|SQLITE_CorruptRdOnly); + + /* If one has been configured, invoke the rollback-hook callback */ + if( db->xRollbackCallback && (inTrans || !db->autoCommit) ){ + db->xRollbackCallback(db->pRollbackArg); + } +} + +/* +** Return a static string containing the name corresponding to the error code +** specified in the argument. +*/ +#if defined(SQLITE_NEED_ERR_NAME) +const char *sqlite3ErrName(int rc){ + const char *zName = 0; + int i, origRc = rc; + for(i=0; i<2 && zName==0; i++, rc &= 0xff){ + switch( rc ){ + case SQLITE_OK: zName = "SQLITE_OK"; break; + case SQLITE_ERROR: zName = "SQLITE_ERROR"; break; + case SQLITE_ERROR_SNAPSHOT: zName = "SQLITE_ERROR_SNAPSHOT"; break; + case SQLITE_INTERNAL: zName = "SQLITE_INTERNAL"; break; + case SQLITE_PERM: zName = "SQLITE_PERM"; break; + case SQLITE_ABORT: zName = "SQLITE_ABORT"; break; + case SQLITE_ABORT_ROLLBACK: zName = "SQLITE_ABORT_ROLLBACK"; break; + case SQLITE_BUSY: zName = "SQLITE_BUSY"; break; + case SQLITE_BUSY_RECOVERY: zName = "SQLITE_BUSY_RECOVERY"; break; + case SQLITE_BUSY_SNAPSHOT: zName = "SQLITE_BUSY_SNAPSHOT"; break; + case SQLITE_LOCKED: zName = "SQLITE_LOCKED"; break; + case SQLITE_LOCKED_SHAREDCACHE: zName = "SQLITE_LOCKED_SHAREDCACHE";break; + case SQLITE_NOMEM: zName = "SQLITE_NOMEM"; break; + case SQLITE_READONLY: zName = "SQLITE_READONLY"; break; + case SQLITE_READONLY_RECOVERY: zName = "SQLITE_READONLY_RECOVERY"; break; + case SQLITE_READONLY_CANTINIT: zName = "SQLITE_READONLY_CANTINIT"; break; + case SQLITE_READONLY_ROLLBACK: zName = "SQLITE_READONLY_ROLLBACK"; break; + case SQLITE_READONLY_DBMOVED: zName = "SQLITE_READONLY_DBMOVED"; break; + case SQLITE_READONLY_DIRECTORY: zName = "SQLITE_READONLY_DIRECTORY";break; + case SQLITE_INTERRUPT: zName = "SQLITE_INTERRUPT"; break; + case SQLITE_IOERR: zName = "SQLITE_IOERR"; break; + case SQLITE_IOERR_READ: zName = "SQLITE_IOERR_READ"; break; + case SQLITE_IOERR_SHORT_READ: zName = "SQLITE_IOERR_SHORT_READ"; break; + case SQLITE_IOERR_WRITE: zName = "SQLITE_IOERR_WRITE"; break; + case SQLITE_IOERR_FSYNC: zName = "SQLITE_IOERR_FSYNC"; break; + case SQLITE_IOERR_DIR_FSYNC: zName = "SQLITE_IOERR_DIR_FSYNC"; break; + case SQLITE_IOERR_TRUNCATE: zName = "SQLITE_IOERR_TRUNCATE"; break; + case SQLITE_IOERR_FSTAT: zName = "SQLITE_IOERR_FSTAT"; break; + case SQLITE_IOERR_UNLOCK: zName = "SQLITE_IOERR_UNLOCK"; break; + case SQLITE_IOERR_RDLOCK: zName = "SQLITE_IOERR_RDLOCK"; break; + case SQLITE_IOERR_DELETE: zName = "SQLITE_IOERR_DELETE"; break; + case SQLITE_IOERR_NOMEM: zName = "SQLITE_IOERR_NOMEM"; break; + case SQLITE_IOERR_ACCESS: zName = "SQLITE_IOERR_ACCESS"; break; + case SQLITE_IOERR_CHECKRESERVEDLOCK: + zName = "SQLITE_IOERR_CHECKRESERVEDLOCK"; break; + case SQLITE_IOERR_LOCK: zName = "SQLITE_IOERR_LOCK"; break; + case SQLITE_IOERR_CLOSE: zName = "SQLITE_IOERR_CLOSE"; break; + case SQLITE_IOERR_DIR_CLOSE: zName = "SQLITE_IOERR_DIR_CLOSE"; break; + case SQLITE_IOERR_SHMOPEN: zName = "SQLITE_IOERR_SHMOPEN"; break; + case SQLITE_IOERR_SHMSIZE: zName = "SQLITE_IOERR_SHMSIZE"; break; + case SQLITE_IOERR_SHMLOCK: zName = "SQLITE_IOERR_SHMLOCK"; break; + case SQLITE_IOERR_SHMMAP: zName = "SQLITE_IOERR_SHMMAP"; break; + case SQLITE_IOERR_SEEK: zName = "SQLITE_IOERR_SEEK"; break; + case SQLITE_IOERR_DELETE_NOENT: zName = "SQLITE_IOERR_DELETE_NOENT";break; + case SQLITE_IOERR_MMAP: zName = "SQLITE_IOERR_MMAP"; break; + case SQLITE_IOERR_GETTEMPPATH: zName = "SQLITE_IOERR_GETTEMPPATH"; break; + case SQLITE_IOERR_CONVPATH: zName = "SQLITE_IOERR_CONVPATH"; break; + case SQLITE_CORRUPT: zName = "SQLITE_CORRUPT"; break; + case SQLITE_CORRUPT_VTAB: zName = "SQLITE_CORRUPT_VTAB"; break; + case SQLITE_NOTFOUND: zName = "SQLITE_NOTFOUND"; break; + case SQLITE_FULL: zName = "SQLITE_FULL"; break; + case SQLITE_CANTOPEN: zName = "SQLITE_CANTOPEN"; break; + case SQLITE_CANTOPEN_NOTEMPDIR: zName = "SQLITE_CANTOPEN_NOTEMPDIR";break; + case SQLITE_CANTOPEN_ISDIR: zName = "SQLITE_CANTOPEN_ISDIR"; break; + case SQLITE_CANTOPEN_FULLPATH: zName = "SQLITE_CANTOPEN_FULLPATH"; break; + case SQLITE_CANTOPEN_CONVPATH: zName = "SQLITE_CANTOPEN_CONVPATH"; break; + case SQLITE_CANTOPEN_SYMLINK: zName = "SQLITE_CANTOPEN_SYMLINK"; break; + case SQLITE_PROTOCOL: zName = "SQLITE_PROTOCOL"; break; + case SQLITE_EMPTY: zName = "SQLITE_EMPTY"; break; + case SQLITE_SCHEMA: zName = "SQLITE_SCHEMA"; break; + case SQLITE_TOOBIG: zName = "SQLITE_TOOBIG"; break; + case SQLITE_CONSTRAINT: zName = "SQLITE_CONSTRAINT"; break; + case SQLITE_CONSTRAINT_UNIQUE: zName = "SQLITE_CONSTRAINT_UNIQUE"; break; + case SQLITE_CONSTRAINT_TRIGGER: zName = "SQLITE_CONSTRAINT_TRIGGER";break; + case SQLITE_CONSTRAINT_FOREIGNKEY: + zName = "SQLITE_CONSTRAINT_FOREIGNKEY"; break; + case SQLITE_CONSTRAINT_CHECK: zName = "SQLITE_CONSTRAINT_CHECK"; break; + case SQLITE_CONSTRAINT_PRIMARYKEY: + zName = "SQLITE_CONSTRAINT_PRIMARYKEY"; break; + case SQLITE_CONSTRAINT_NOTNULL: zName = "SQLITE_CONSTRAINT_NOTNULL";break; + case SQLITE_CONSTRAINT_COMMITHOOK: + zName = "SQLITE_CONSTRAINT_COMMITHOOK"; break; + case SQLITE_CONSTRAINT_VTAB: zName = "SQLITE_CONSTRAINT_VTAB"; break; + case SQLITE_CONSTRAINT_FUNCTION: + zName = "SQLITE_CONSTRAINT_FUNCTION"; break; + case SQLITE_CONSTRAINT_ROWID: zName = "SQLITE_CONSTRAINT_ROWID"; break; + case SQLITE_MISMATCH: zName = "SQLITE_MISMATCH"; break; + case SQLITE_MISUSE: zName = "SQLITE_MISUSE"; break; + case SQLITE_NOLFS: zName = "SQLITE_NOLFS"; break; + case SQLITE_AUTH: zName = "SQLITE_AUTH"; break; + case SQLITE_FORMAT: zName = "SQLITE_FORMAT"; break; + case SQLITE_RANGE: zName = "SQLITE_RANGE"; break; + case SQLITE_NOTADB: zName = "SQLITE_NOTADB"; break; + case SQLITE_ROW: zName = "SQLITE_ROW"; break; + case SQLITE_NOTICE: zName = "SQLITE_NOTICE"; break; + case SQLITE_NOTICE_RECOVER_WAL: zName = "SQLITE_NOTICE_RECOVER_WAL";break; + case SQLITE_NOTICE_RECOVER_ROLLBACK: + zName = "SQLITE_NOTICE_RECOVER_ROLLBACK"; break; + case SQLITE_NOTICE_RBU: zName = "SQLITE_NOTICE_RBU"; break; + case SQLITE_WARNING: zName = "SQLITE_WARNING"; break; + case SQLITE_WARNING_AUTOINDEX: zName = "SQLITE_WARNING_AUTOINDEX"; break; + case SQLITE_DONE: zName = "SQLITE_DONE"; break; + } + } + if( zName==0 ){ + static char zBuf[50]; + sqlite3_snprintf(sizeof(zBuf), zBuf, "SQLITE_UNKNOWN(%d)", origRc); + zName = zBuf; + } + return zName; +} +#endif + +/* +** Return a static string that describes the kind of error specified in the +** argument. +*/ +const char *sqlite3ErrStr(int rc){ + static const char* const aMsg[] = { + /* SQLITE_OK */ "not an error", + /* SQLITE_ERROR */ "SQL logic error", + /* SQLITE_INTERNAL */ 0, + /* SQLITE_PERM */ "access permission denied", + /* SQLITE_ABORT */ "query aborted", + /* SQLITE_BUSY */ "database is locked", + /* SQLITE_LOCKED */ "database table is locked", + /* SQLITE_NOMEM */ "out of memory", + /* SQLITE_READONLY */ "attempt to write a readonly database", + /* SQLITE_INTERRUPT */ "interrupted", + /* SQLITE_IOERR */ "disk I/O error", + /* SQLITE_CORRUPT */ "database disk image is malformed", + /* SQLITE_NOTFOUND */ "unknown operation", + /* SQLITE_FULL */ "database or disk is full", + /* SQLITE_CANTOPEN */ "unable to open database file", + /* SQLITE_PROTOCOL */ "locking protocol", + /* SQLITE_EMPTY */ 0, + /* SQLITE_SCHEMA */ "database schema has changed", + /* SQLITE_TOOBIG */ "string or blob too big", + /* SQLITE_CONSTRAINT */ "constraint failed", + /* SQLITE_MISMATCH */ "datatype mismatch", + /* SQLITE_MISUSE */ "bad parameter or other API misuse", +#ifdef SQLITE_DISABLE_LFS + /* SQLITE_NOLFS */ "large file support is disabled", +#else + /* SQLITE_NOLFS */ 0, +#endif + /* SQLITE_AUTH */ "authorization denied", + /* SQLITE_FORMAT */ 0, + /* SQLITE_RANGE */ "column index out of range", + /* SQLITE_NOTADB */ "file is not a database", + /* SQLITE_NOTICE */ "notification message", + /* SQLITE_WARNING */ "warning message", + }; + const char *zErr = "unknown error"; + switch( rc ){ + case SQLITE_ABORT_ROLLBACK: { + zErr = "abort due to ROLLBACK"; + break; + } + case SQLITE_ROW: { + zErr = "another row available"; + break; + } + case SQLITE_DONE: { + zErr = "no more rows available"; + break; + } + default: { + rc &= 0xff; + if( ALWAYS(rc>=0) && rc<ArraySize(aMsg) && aMsg[rc]!=0 ){ + zErr = aMsg[rc]; + } + break; + } + } + return zErr; +} + +/* +** This routine implements a busy callback that sleeps and tries +** again until a timeout value is reached. The timeout value is +** an integer number of milliseconds passed in as the first +** argument. +** +** Return non-zero to retry the lock. Return zero to stop trying +** and cause SQLite to return SQLITE_BUSY. +*/ +static int sqliteDefaultBusyCallback( + void *ptr, /* Database connection */ + int count /* Number of times table has been busy */ +){ +#if SQLITE_OS_WIN || !defined(HAVE_NANOSLEEP) || HAVE_NANOSLEEP + /* This case is for systems that have support for sleeping for fractions of + ** a second. Examples: All windows systems, unix systems with nanosleep() */ + static const u8 delays[] = + { 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 }; + static const u8 totals[] = + { 0, 1, 3, 8, 18, 33, 53, 78, 103, 128, 178, 228 }; +# define NDELAY ArraySize(delays) + sqlite3 *db = (sqlite3 *)ptr; + int tmout = db->busyTimeout; + int delay, prior; + + assert( count>=0 ); + if( count < NDELAY ){ + delay = delays[count]; + prior = totals[count]; + }else{ + delay = delays[NDELAY-1]; + prior = totals[NDELAY-1] + delay*(count-(NDELAY-1)); + } + if( prior + delay > tmout ){ + delay = tmout - prior; + if( delay<=0 ) return 0; + } + sqlite3OsSleep(db->pVfs, delay*1000); + return 1; +#else + /* This case for unix systems that lack usleep() support. Sleeping + ** must be done in increments of whole seconds */ + sqlite3 *db = (sqlite3 *)ptr; + int tmout = ((sqlite3 *)ptr)->busyTimeout; + if( (count+1)*1000 > tmout ){ + return 0; + } + sqlite3OsSleep(db->pVfs, 1000000); + return 1; +#endif +} + +/* +** Invoke the given busy handler. +** +** This routine is called when an operation failed to acquire a +** lock on VFS file pFile. +** +** If this routine returns non-zero, the lock is retried. If it +** returns 0, the operation aborts with an SQLITE_BUSY error. +*/ +int sqlite3InvokeBusyHandler(BusyHandler *p){ + int rc; + if( p->xBusyHandler==0 || p->nBusy<0 ) return 0; + rc = p->xBusyHandler(p->pBusyArg, p->nBusy); + if( rc==0 ){ + p->nBusy = -1; + }else{ + p->nBusy++; + } + return rc; +} + +/* +** This routine sets the busy callback for an Sqlite database to the +** given callback function with the given argument. +*/ +int sqlite3_busy_handler( + sqlite3 *db, + int (*xBusy)(void*,int), + void *pArg +){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + db->busyHandler.xBusyHandler = xBusy; + db->busyHandler.pBusyArg = pArg; + db->busyHandler.nBusy = 0; + db->busyTimeout = 0; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + +#ifndef SQLITE_OMIT_PROGRESS_CALLBACK +/* +** This routine sets the progress callback for an Sqlite database to the +** given callback function with the given argument. The progress callback will +** be invoked every nOps opcodes. +*/ +void sqlite3_progress_handler( + sqlite3 *db, + int nOps, + int (*xProgress)(void*), + void *pArg +){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return; + } +#endif + sqlite3_mutex_enter(db->mutex); + if( nOps>0 ){ + db->xProgress = xProgress; + db->nProgressOps = (unsigned)nOps; + db->pProgressArg = pArg; + }else{ + db->xProgress = 0; + db->nProgressOps = 0; + db->pProgressArg = 0; + } + sqlite3_mutex_leave(db->mutex); +} +#endif + + +/* +** This routine installs a default busy handler that waits for the +** specified number of milliseconds before returning 0. +*/ +int sqlite3_busy_timeout(sqlite3 *db, int ms){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + if( ms>0 ){ + sqlite3_busy_handler(db, (int(*)(void*,int))sqliteDefaultBusyCallback, + (void*)db); + db->busyTimeout = ms; + }else{ + sqlite3_busy_handler(db, 0, 0); + } + return SQLITE_OK; +} + +/* +** Cause any pending operation to stop at its earliest opportunity. +*/ +void sqlite3_interrupt(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) + && (db==0 || db->eOpenState!=SQLITE_STATE_ZOMBIE) + ){ + (void)SQLITE_MISUSE_BKPT; + return; + } +#endif + AtomicStore(&db->u1.isInterrupted, 1); +} + +/* +** Return true or false depending on whether or not an interrupt is +** pending on connection db. +*/ +int sqlite3_is_interrupted(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) + && (db==0 || db->eOpenState!=SQLITE_STATE_ZOMBIE) + ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + return AtomicLoad(&db->u1.isInterrupted)!=0; +} + +/* +** This function is exactly the same as sqlite3_create_function(), except +** that it is designed to be called by internal code. The difference is +** that if a malloc() fails in sqlite3_create_function(), an error code +** is returned and the mallocFailed flag cleared. +*/ +int sqlite3CreateFunc( + sqlite3 *db, + const char *zFunctionName, + int nArg, + int enc, + void *pUserData, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value **), + FuncDestructor *pDestructor +){ + FuncDef *p; + int extraFlags; + + assert( sqlite3_mutex_held(db->mutex) ); + assert( xValue==0 || xSFunc==0 ); + if( zFunctionName==0 /* Must have a valid name */ + || (xSFunc!=0 && xFinal!=0) /* Not both xSFunc and xFinal */ + || ((xFinal==0)!=(xStep==0)) /* Both or neither of xFinal and xStep */ + || ((xValue==0)!=(xInverse==0)) /* Both or neither of xValue, xInverse */ + || (nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) + || (255<sqlite3Strlen30(zFunctionName)) + ){ + return SQLITE_MISUSE_BKPT; + } + + assert( SQLITE_FUNC_CONSTANT==SQLITE_DETERMINISTIC ); + assert( SQLITE_FUNC_DIRECT==SQLITE_DIRECTONLY ); + extraFlags = enc & (SQLITE_DETERMINISTIC|SQLITE_DIRECTONLY| + SQLITE_SUBTYPE|SQLITE_INNOCUOUS|SQLITE_RESULT_SUBTYPE); + enc &= (SQLITE_FUNC_ENCMASK|SQLITE_ANY); + + /* The SQLITE_INNOCUOUS flag is the same bit as SQLITE_FUNC_UNSAFE. But + ** the meaning is inverted. So flip the bit. */ + assert( SQLITE_FUNC_UNSAFE==SQLITE_INNOCUOUS ); + extraFlags ^= SQLITE_FUNC_UNSAFE; /* tag-20230109-1 */ + + +#ifndef SQLITE_OMIT_UTF16 + /* If SQLITE_UTF16 is specified as the encoding type, transform this + ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the + ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally. + ** + ** If SQLITE_ANY is specified, add three versions of the function + ** to the hash table. + */ + switch( enc ){ + case SQLITE_UTF16: + enc = SQLITE_UTF16NATIVE; + break; + case SQLITE_ANY: { + int rc; + rc = sqlite3CreateFunc(db, zFunctionName, nArg, + (SQLITE_UTF8|extraFlags)^SQLITE_FUNC_UNSAFE, /* tag-20230109-1 */ + pUserData, xSFunc, xStep, xFinal, xValue, xInverse, pDestructor); + if( rc==SQLITE_OK ){ + rc = sqlite3CreateFunc(db, zFunctionName, nArg, + (SQLITE_UTF16LE|extraFlags)^SQLITE_FUNC_UNSAFE, /* tag-20230109-1*/ + pUserData, xSFunc, xStep, xFinal, xValue, xInverse, pDestructor); + } + if( rc!=SQLITE_OK ){ + return rc; + } + enc = SQLITE_UTF16BE; + break; + } + case SQLITE_UTF8: + case SQLITE_UTF16LE: + case SQLITE_UTF16BE: + break; + default: + enc = SQLITE_UTF8; + break; + } +#else + enc = SQLITE_UTF8; +#endif + + /* Check if an existing function is being overridden or deleted. If so, + ** and there are active VMs, then return SQLITE_BUSY. If a function + ** is being overridden/deleted but there are no active VMs, allow the + ** operation to continue but invalidate all precompiled statements. + */ + p = sqlite3FindFunction(db, zFunctionName, nArg, (u8)enc, 0); + if( p && (p->funcFlags & SQLITE_FUNC_ENCMASK)==(u32)enc && p->nArg==nArg ){ + if( db->nVdbeActive ){ + sqlite3ErrorWithMsg(db, SQLITE_BUSY, + "unable to delete/modify user-function due to active statements"); + assert( !db->mallocFailed ); + return SQLITE_BUSY; + }else{ + sqlite3ExpirePreparedStatements(db, 0); + } + }else if( xSFunc==0 && xFinal==0 ){ + /* Trying to delete a function that does not exist. This is a no-op. + ** https://sqlite.org/forum/forumpost/726219164b */ + return SQLITE_OK; + } + + p = sqlite3FindFunction(db, zFunctionName, nArg, (u8)enc, 1); + assert(p || db->mallocFailed); + if( !p ){ + return SQLITE_NOMEM_BKPT; + } + + /* If an older version of the function with a configured destructor is + ** being replaced invoke the destructor function here. */ + functionDestroy(db, p); + + if( pDestructor ){ + pDestructor->nRef++; + } + p->u.pDestructor = pDestructor; + p->funcFlags = (p->funcFlags & SQLITE_FUNC_ENCMASK) | extraFlags; + testcase( p->funcFlags & SQLITE_DETERMINISTIC ); + testcase( p->funcFlags & SQLITE_DIRECTONLY ); + p->xSFunc = xSFunc ? xSFunc : xStep; + p->xFinalize = xFinal; + p->xValue = xValue; + p->xInverse = xInverse; + p->pUserData = pUserData; + p->nArg = (u16)nArg; + return SQLITE_OK; +} + +/* +** Worker function used by utf-8 APIs that create new functions: +** +** sqlite3_create_function() +** sqlite3_create_function_v2() +** sqlite3_create_window_function() +*/ +static int createFunctionApi( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value**), + void(*xDestroy)(void*) +){ + int rc = SQLITE_ERROR; + FuncDestructor *pArg = 0; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif + sqlite3_mutex_enter(db->mutex); + if( xDestroy ){ + pArg = (FuncDestructor *)sqlite3Malloc(sizeof(FuncDestructor)); + if( !pArg ){ + sqlite3OomFault(db); + xDestroy(p); + goto out; + } + pArg->nRef = 0; + pArg->xDestroy = xDestroy; + pArg->pUserData = p; + } + rc = sqlite3CreateFunc(db, zFunc, nArg, enc, p, + xSFunc, xStep, xFinal, xValue, xInverse, pArg + ); + if( pArg && pArg->nRef==0 ){ + assert( rc!=SQLITE_OK || (xStep==0 && xFinal==0) ); + xDestroy(p); + sqlite3_free(pArg); + } + + out: + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** Create new user functions. +*/ +int sqlite3_create_function( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*) +){ + return createFunctionApi(db, zFunc, nArg, enc, p, xSFunc, xStep, + xFinal, 0, 0, 0); +} +int sqlite3_create_function_v2( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value **), + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + void (*xDestroy)(void *) +){ + return createFunctionApi(db, zFunc, nArg, enc, p, xSFunc, xStep, + xFinal, 0, 0, xDestroy); +} +int sqlite3_create_window_function( + sqlite3 *db, + const char *zFunc, + int nArg, + int enc, + void *p, + void (*xStep)(sqlite3_context*,int,sqlite3_value **), + void (*xFinal)(sqlite3_context*), + void (*xValue)(sqlite3_context*), + void (*xInverse)(sqlite3_context*,int,sqlite3_value **), + void (*xDestroy)(void *) +){ + return createFunctionApi(db, zFunc, nArg, enc, p, 0, xStep, + xFinal, xValue, xInverse, xDestroy); +} + +#ifndef SQLITE_OMIT_UTF16 +int sqlite3_create_function16( + sqlite3 *db, + const void *zFunctionName, + int nArg, + int eTextRep, + void *p, + void (*xSFunc)(sqlite3_context*,int,sqlite3_value**), + void (*xStep)(sqlite3_context*,int,sqlite3_value**), + void (*xFinal)(sqlite3_context*) +){ + int rc; + char *zFunc8; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zFunctionName==0 ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1, SQLITE_UTF16NATIVE); + rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xSFunc,xStep,xFinal,0,0,0); + sqlite3DbFree(db, zFunc8); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} +#endif + + +/* +** The following is the implementation of an SQL function that always +** fails with an error message stating that the function is used in the +** wrong context. The sqlite3_overload_function() API might construct +** SQL function that use this routine so that the functions will exist +** for name resolution but are actually overloaded by the xFindFunction +** method of virtual tables. +*/ +static void sqlite3InvalidFunction( + sqlite3_context *context, /* The function calling context */ + int NotUsed, /* Number of arguments to the function */ + sqlite3_value **NotUsed2 /* Value of each argument */ +){ + const char *zName = (const char*)sqlite3_user_data(context); + char *zErr; + UNUSED_PARAMETER2(NotUsed, NotUsed2); + zErr = sqlite3_mprintf( + "unable to use function %s in the requested context", zName); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); +} + +/* +** Declare that a function has been overloaded by a virtual table. +** +** If the function already exists as a regular global function, then +** this routine is a no-op. If the function does not exist, then create +** a new one that always throws a run-time error. +** +** When virtual tables intend to provide an overloaded function, they +** should call this routine to make sure the global function exists. +** A global function must exist in order for name resolution to work +** properly. +*/ +int sqlite3_overload_function( + sqlite3 *db, + const char *zName, + int nArg +){ + int rc; + char *zCopy; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 || nArg<-2 ){ + return SQLITE_MISUSE_BKPT; + } +#endif + sqlite3_mutex_enter(db->mutex); + rc = sqlite3FindFunction(db, zName, nArg, SQLITE_UTF8, 0)!=0; + sqlite3_mutex_leave(db->mutex); + if( rc ) return SQLITE_OK; + zCopy = sqlite3_mprintf("%s", zName); + if( zCopy==0 ) return SQLITE_NOMEM; + return sqlite3_create_function_v2(db, zName, nArg, SQLITE_UTF8, + zCopy, sqlite3InvalidFunction, 0, 0, sqlite3_free); +} + +#ifndef SQLITE_OMIT_TRACE +/* +** Register a trace function. The pArg from the previously registered trace +** is returned. +** +** A NULL trace function means that no tracing is executes. A non-NULL +** trace is a pointer to a function that is invoked at the start of each +** SQL statement. +*/ +#ifndef SQLITE_OMIT_DEPRECATED +void *sqlite3_trace(sqlite3 *db, void(*xTrace)(void*,const char*), void *pArg){ + void *pOld; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pOld = db->pTraceArg; + db->mTrace = xTrace ? SQLITE_TRACE_LEGACY : 0; + db->trace.xLegacy = xTrace; + db->pTraceArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pOld; +} +#endif /* SQLITE_OMIT_DEPRECATED */ + +/* Register a trace callback using the version-2 interface. +*/ +int sqlite3_trace_v2( + sqlite3 *db, /* Trace this connection */ + unsigned mTrace, /* Mask of events to be traced */ + int(*xTrace)(unsigned,void*,void*,void*), /* Callback to invoke */ + void *pArg /* Context */ +){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif + sqlite3_mutex_enter(db->mutex); + if( mTrace==0 ) xTrace = 0; + if( xTrace==0 ) mTrace = 0; + db->mTrace = mTrace; + db->trace.xV2 = xTrace; + db->pTraceArg = pArg; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + +#ifndef SQLITE_OMIT_DEPRECATED +/* +** Register a profile function. The pArg from the previously registered +** profile function is returned. +** +** A NULL profile function means that no profiling is executes. A non-NULL +** profile is a pointer to a function that is invoked at the conclusion of +** each SQL statement that is run. +*/ +void *sqlite3_profile( + sqlite3 *db, + void (*xProfile)(void*,const char*,sqlite_uint64), + void *pArg +){ + void *pOld; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pOld = db->pProfileArg; + db->xProfile = xProfile; + db->pProfileArg = pArg; + db->mTrace &= SQLITE_TRACE_NONLEGACY_MASK; + if( db->xProfile ) db->mTrace |= SQLITE_TRACE_XPROFILE; + sqlite3_mutex_leave(db->mutex); + return pOld; +} +#endif /* SQLITE_OMIT_DEPRECATED */ +#endif /* SQLITE_OMIT_TRACE */ + +/* +** Register a function to be invoked when a transaction commits. +** If the invoked function returns non-zero, then the commit becomes a +** rollback. +*/ +void *sqlite3_commit_hook( + sqlite3 *db, /* Attach the hook to this database */ + int (*xCallback)(void*), /* Function to invoke on each commit */ + void *pArg /* Argument to the function */ +){ + void *pOld; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pOld = db->pCommitArg; + db->xCommitCallback = xCallback; + db->pCommitArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pOld; +} + +/* +** Register a callback to be invoked each time a row is updated, +** inserted or deleted using this database connection. +*/ +void *sqlite3_update_hook( + sqlite3 *db, /* Attach the hook to this database */ + void (*xCallback)(void*,int,char const *,char const *,sqlite_int64), + void *pArg /* Argument to the function */ +){ + void *pRet; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pRet = db->pUpdateArg; + db->xUpdateCallback = xCallback; + db->pUpdateArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +} + +/* +** Register a callback to be invoked each time a transaction is rolled +** back by this database connection. +*/ +void *sqlite3_rollback_hook( + sqlite3 *db, /* Attach the hook to this database */ + void (*xCallback)(void*), /* Callback function */ + void *pArg /* Argument to the function */ +){ + void *pRet; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pRet = db->pRollbackArg; + db->xRollbackCallback = xCallback; + db->pRollbackArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +} + +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK +/* +** Register a callback to be invoked each time a row is updated, +** inserted or deleted using this database connection. +*/ +void *sqlite3_preupdate_hook( + sqlite3 *db, /* Attach the hook to this database */ + void(*xCallback)( /* Callback function */ + void*,sqlite3*,int,char const*,char const*,sqlite3_int64,sqlite3_int64), + void *pArg /* First callback argument */ +){ + void *pRet; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( db==0 ){ + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pRet = db->pPreUpdateArg; + db->xPreUpdateCallback = xCallback; + db->pPreUpdateArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +} +#endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ + +/* +** Register a function to be invoked prior to each autovacuum that +** determines the number of pages to vacuum. +*/ +int sqlite3_autovacuum_pages( + sqlite3 *db, /* Attach the hook to this database */ + unsigned int (*xCallback)(void*,const char*,u32,u32,u32), + void *pArg, /* Argument to the function */ + void (*xDestructor)(void*) /* Destructor for pArg */ +){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + if( xDestructor ) xDestructor(pArg); + return SQLITE_MISUSE_BKPT; + } +#endif + sqlite3_mutex_enter(db->mutex); + if( db->xAutovacDestr ){ + db->xAutovacDestr(db->pAutovacPagesArg); + } + db->xAutovacPages = xCallback; + db->pAutovacPagesArg = pArg; + db->xAutovacDestr = xDestructor; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + + +#ifndef SQLITE_OMIT_WAL +/* +** The sqlite3_wal_hook() callback registered by sqlite3_wal_autocheckpoint(). +** Invoke sqlite3_wal_checkpoint if the number of frames in the log file +** is greater than sqlite3.pWalArg cast to an integer (the value configured by +** wal_autocheckpoint()). +*/ +int sqlite3WalDefaultHook( + void *pClientData, /* Argument */ + sqlite3 *db, /* Connection */ + const char *zDb, /* Database */ + int nFrame /* Size of WAL */ +){ + if( nFrame>=SQLITE_PTR_TO_INT(pClientData) ){ + sqlite3BeginBenignMalloc(); + sqlite3_wal_checkpoint(db, zDb); + sqlite3EndBenignMalloc(); + } + return SQLITE_OK; +} +#endif /* SQLITE_OMIT_WAL */ + +/* +** Configure an sqlite3_wal_hook() callback to automatically checkpoint +** a database after committing a transaction if there are nFrame or +** more frames in the log file. Passing zero or a negative value as the +** nFrame parameter disables automatic checkpoints entirely. +** +** The callback registered by this function replaces any existing callback +** registered using sqlite3_wal_hook(). Likewise, registering a callback +** using sqlite3_wal_hook() disables the automatic checkpoint mechanism +** configured by this function. +*/ +int sqlite3_wal_autocheckpoint(sqlite3 *db, int nFrame){ +#ifdef SQLITE_OMIT_WAL + UNUSED_PARAMETER(db); + UNUSED_PARAMETER(nFrame); +#else +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + if( nFrame>0 ){ + sqlite3_wal_hook(db, sqlite3WalDefaultHook, SQLITE_INT_TO_PTR(nFrame)); + }else{ + sqlite3_wal_hook(db, 0, 0); + } +#endif + return SQLITE_OK; +} + +/* +** Register a callback to be invoked each time a transaction is written +** into the write-ahead-log by this database connection. +*/ +void *sqlite3_wal_hook( + sqlite3 *db, /* Attach the hook to this db handle */ + int(*xCallback)(void *, sqlite3*, const char*, int), + void *pArg /* First argument passed to xCallback() */ +){ +#ifndef SQLITE_OMIT_WAL + void *pRet; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + sqlite3_mutex_enter(db->mutex); + pRet = db->pWalArg; + db->xWalCallback = xCallback; + db->pWalArg = pArg; + sqlite3_mutex_leave(db->mutex); + return pRet; +#else + return 0; +#endif +} + +/* +** Checkpoint database zDb. +*/ +int sqlite3_wal_checkpoint_v2( + sqlite3 *db, /* Database handle */ + const char *zDb, /* Name of attached database (or NULL) */ + int eMode, /* SQLITE_CHECKPOINT_* value */ + int *pnLog, /* OUT: Size of WAL log in frames */ + int *pnCkpt /* OUT: Total number of frames checkpointed */ +){ +#ifdef SQLITE_OMIT_WAL + return SQLITE_OK; +#else + int rc; /* Return code */ + int iDb; /* Schema to checkpoint */ + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + + /* Initialize the output variables to -1 in case an error occurs. */ + if( pnLog ) *pnLog = -1; + if( pnCkpt ) *pnCkpt = -1; + + assert( SQLITE_CHECKPOINT_PASSIVE==0 ); + assert( SQLITE_CHECKPOINT_FULL==1 ); + assert( SQLITE_CHECKPOINT_RESTART==2 ); + assert( SQLITE_CHECKPOINT_TRUNCATE==3 ); + if( eMode<SQLITE_CHECKPOINT_PASSIVE || eMode>SQLITE_CHECKPOINT_TRUNCATE ){ + /* EVIDENCE-OF: R-03996-12088 The M parameter must be a valid checkpoint + ** mode: */ + return SQLITE_MISUSE_BKPT; + } + + sqlite3_mutex_enter(db->mutex); + if( zDb && zDb[0] ){ + iDb = sqlite3FindDbName(db, zDb); + }else{ + iDb = SQLITE_MAX_DB; /* This means process all schemas */ + } + if( iDb<0 ){ + rc = SQLITE_ERROR; + sqlite3ErrorWithMsg(db, SQLITE_ERROR, "unknown database: %s", zDb); + }else{ + db->busyHandler.nBusy = 0; + rc = sqlite3Checkpoint(db, iDb, eMode, pnLog, pnCkpt); + sqlite3Error(db, rc); + } + rc = sqlite3ApiExit(db, rc); + + /* If there are no active statements, clear the interrupt flag at this + ** point. */ + if( db->nVdbeActive==0 ){ + AtomicStore(&db->u1.isInterrupted, 0); + } + + sqlite3_mutex_leave(db->mutex); + return rc; +#endif +} + + +/* +** Checkpoint database zDb. If zDb is NULL, or if the buffer zDb points +** to contains a zero-length string, all attached databases are +** checkpointed. +*/ +int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){ + /* EVIDENCE-OF: R-41613-20553 The sqlite3_wal_checkpoint(D,X) is equivalent to + ** sqlite3_wal_checkpoint_v2(D,X,SQLITE_CHECKPOINT_PASSIVE,0,0). */ + return sqlite3_wal_checkpoint_v2(db,zDb,SQLITE_CHECKPOINT_PASSIVE,0,0); +} + +#ifndef SQLITE_OMIT_WAL +/* +** Run a checkpoint on database iDb. This is a no-op if database iDb is +** not currently open in WAL mode. +** +** If a transaction is open on the database being checkpointed, this +** function returns SQLITE_LOCKED and a checkpoint is not attempted. If +** an error occurs while running the checkpoint, an SQLite error code is +** returned (i.e. SQLITE_IOERR). Otherwise, SQLITE_OK. +** +** The mutex on database handle db should be held by the caller. The mutex +** associated with the specific b-tree being checkpointed is taken by +** this function while the checkpoint is running. +** +** If iDb is passed SQLITE_MAX_DB then all attached databases are +** checkpointed. If an error is encountered it is returned immediately - +** no attempt is made to checkpoint any remaining databases. +** +** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL, RESTART +** or TRUNCATE. +*/ +int sqlite3Checkpoint(sqlite3 *db, int iDb, int eMode, int *pnLog, int *pnCkpt){ + int rc = SQLITE_OK; /* Return code */ + int i; /* Used to iterate through attached dbs */ + int bBusy = 0; /* True if SQLITE_BUSY has been encountered */ + + assert( sqlite3_mutex_held(db->mutex) ); + assert( !pnLog || *pnLog==-1 ); + assert( !pnCkpt || *pnCkpt==-1 ); + testcase( iDb==SQLITE_MAX_ATTACHED ); /* See forum post a006d86f72 */ + testcase( iDb==SQLITE_MAX_DB ); + + for(i=0; i<db->nDb && rc==SQLITE_OK; i++){ + if( i==iDb || iDb==SQLITE_MAX_DB ){ + rc = sqlite3BtreeCheckpoint(db->aDb[i].pBt, eMode, pnLog, pnCkpt); + pnLog = 0; + pnCkpt = 0; + if( rc==SQLITE_BUSY ){ + bBusy = 1; + rc = SQLITE_OK; + } + } + } + + return (rc==SQLITE_OK && bBusy) ? SQLITE_BUSY : rc; +} +#endif /* SQLITE_OMIT_WAL */ + +/* +** This function returns true if main-memory should be used instead of +** a temporary file for transient pager files and statement journals. +** The value returned depends on the value of db->temp_store (runtime +** parameter) and the compile time value of SQLITE_TEMP_STORE. The +** following table describes the relationship between these two values +** and this functions return value. +** +** SQLITE_TEMP_STORE db->temp_store Location of temporary database +** ----------------- -------------- ------------------------------ +** 0 any file (return 0) +** 1 1 file (return 0) +** 1 2 memory (return 1) +** 1 0 file (return 0) +** 2 1 file (return 0) +** 2 2 memory (return 1) +** 2 0 memory (return 1) +** 3 any memory (return 1) +*/ +int sqlite3TempInMemory(const sqlite3 *db){ +#if SQLITE_TEMP_STORE==1 + return ( db->temp_store==2 ); +#endif +#if SQLITE_TEMP_STORE==2 + return ( db->temp_store!=1 ); +#endif +#if SQLITE_TEMP_STORE==3 + UNUSED_PARAMETER(db); + return 1; +#endif +#if SQLITE_TEMP_STORE<1 || SQLITE_TEMP_STORE>3 + UNUSED_PARAMETER(db); + return 0; +#endif +} + +/* +** Return UTF-8 encoded English language explanation of the most recent +** error. +*/ +const char *sqlite3_errmsg(sqlite3 *db){ + const char *z; + if( !db ){ + return sqlite3ErrStr(SQLITE_NOMEM_BKPT); + } + if( !sqlite3SafetyCheckSickOrOk(db) ){ + return sqlite3ErrStr(SQLITE_MISUSE_BKPT); + } + sqlite3_mutex_enter(db->mutex); + if( db->mallocFailed ){ + z = sqlite3ErrStr(SQLITE_NOMEM_BKPT); + }else{ + testcase( db->pErr==0 ); + z = db->errCode ? (char*)sqlite3_value_text(db->pErr) : 0; + assert( !db->mallocFailed ); + if( z==0 ){ + z = sqlite3ErrStr(db->errCode); + } + } + sqlite3_mutex_leave(db->mutex); + return z; +} + +/* +** Return the byte offset of the most recent error +*/ +int sqlite3_error_offset(sqlite3 *db){ + int iOffset = -1; + if( db && sqlite3SafetyCheckSickOrOk(db) && db->errCode ){ + sqlite3_mutex_enter(db->mutex); + iOffset = db->errByteOffset; + sqlite3_mutex_leave(db->mutex); + } + return iOffset; +} + +#ifndef SQLITE_OMIT_UTF16 +/* +** Return UTF-16 encoded English language explanation of the most recent +** error. +*/ +const void *sqlite3_errmsg16(sqlite3 *db){ + static const u16 outOfMem[] = { + 'o', 'u', 't', ' ', 'o', 'f', ' ', 'm', 'e', 'm', 'o', 'r', 'y', 0 + }; + static const u16 misuse[] = { + 'b', 'a', 'd', ' ', 'p', 'a', 'r', 'a', 'm', 'e', 't', 'e', 'r', ' ', + 'o', 'r', ' ', 'o', 't', 'h', 'e', 'r', ' ', 'A', 'P', 'I', ' ', + 'm', 'i', 's', 'u', 's', 'e', 0 + }; + + const void *z; + if( !db ){ + return (void *)outOfMem; + } + if( !sqlite3SafetyCheckSickOrOk(db) ){ + return (void *)misuse; + } + sqlite3_mutex_enter(db->mutex); + if( db->mallocFailed ){ + z = (void *)outOfMem; + }else{ + z = sqlite3_value_text16(db->pErr); + if( z==0 ){ + sqlite3ErrorWithMsg(db, db->errCode, sqlite3ErrStr(db->errCode)); + z = sqlite3_value_text16(db->pErr); + } + /* A malloc() may have failed within the call to sqlite3_value_text16() + ** above. If this is the case, then the db->mallocFailed flag needs to + ** be cleared before returning. Do this directly, instead of via + ** sqlite3ApiExit(), to avoid setting the database handle error message. + */ + sqlite3OomClear(db); + } + sqlite3_mutex_leave(db->mutex); + return z; +} +#endif /* SQLITE_OMIT_UTF16 */ + +/* +** Return the most recent error code generated by an SQLite routine. If NULL is +** passed to this function, we assume a malloc() failed during sqlite3_open(). +*/ +int sqlite3_errcode(sqlite3 *db){ + if( db && !sqlite3SafetyCheckSickOrOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( !db || db->mallocFailed ){ + return SQLITE_NOMEM_BKPT; + } + return db->errCode & db->errMask; +} +int sqlite3_extended_errcode(sqlite3 *db){ + if( db && !sqlite3SafetyCheckSickOrOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( !db || db->mallocFailed ){ + return SQLITE_NOMEM_BKPT; + } + return db->errCode; +} +int sqlite3_system_errno(sqlite3 *db){ + return db ? db->iSysErrno : 0; +} + +/* +** Return a string that describes the kind of error specified in the +** argument. For now, this simply calls the internal sqlite3ErrStr() +** function. +*/ +const char *sqlite3_errstr(int rc){ + return sqlite3ErrStr(rc); +} + +/* +** Create a new collating function for database "db". The name is zName +** and the encoding is enc. +*/ +static int createCollation( + sqlite3* db, + const char *zName, + u8 enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*), + void(*xDel)(void*) +){ + CollSeq *pColl; + int enc2; + + assert( sqlite3_mutex_held(db->mutex) ); + + /* If SQLITE_UTF16 is specified as the encoding type, transform this + ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the + ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally. + */ + enc2 = enc; + testcase( enc2==SQLITE_UTF16 ); + testcase( enc2==SQLITE_UTF16_ALIGNED ); + if( enc2==SQLITE_UTF16 || enc2==SQLITE_UTF16_ALIGNED ){ + enc2 = SQLITE_UTF16NATIVE; + } + if( enc2<SQLITE_UTF8 || enc2>SQLITE_UTF16BE ){ + return SQLITE_MISUSE_BKPT; + } + + /* Check if this call is removing or replacing an existing collation + ** sequence. If so, and there are active VMs, return busy. If there + ** are no active VMs, invalidate any pre-compiled statements. + */ + pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 0); + if( pColl && pColl->xCmp ){ + if( db->nVdbeActive ){ + sqlite3ErrorWithMsg(db, SQLITE_BUSY, + "unable to delete/modify collation sequence due to active statements"); + return SQLITE_BUSY; + } + sqlite3ExpirePreparedStatements(db, 0); + + /* If collation sequence pColl was created directly by a call to + ** sqlite3_create_collation, and not generated by synthCollSeq(), + ** then any copies made by synthCollSeq() need to be invalidated. + ** Also, collation destructor - CollSeq.xDel() - function may need + ** to be called. + */ + if( (pColl->enc & ~SQLITE_UTF16_ALIGNED)==enc2 ){ + CollSeq *aColl = sqlite3HashFind(&db->aCollSeq, zName); + int j; + for(j=0; j<3; j++){ + CollSeq *p = &aColl[j]; + if( p->enc==pColl->enc ){ + if( p->xDel ){ + p->xDel(p->pUser); + } + p->xCmp = 0; + } + } + } + } + + pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, 1); + if( pColl==0 ) return SQLITE_NOMEM_BKPT; + pColl->xCmp = xCompare; + pColl->pUser = pCtx; + pColl->xDel = xDel; + pColl->enc = (u8)(enc2 | (enc & SQLITE_UTF16_ALIGNED)); + sqlite3Error(db, SQLITE_OK); + return SQLITE_OK; +} + + +/* +** This array defines hard upper bounds on limit values. The +** initializer must be kept in sync with the SQLITE_LIMIT_* +** #defines in sqlite3.h. +*/ +static const int aHardLimit[] = { + SQLITE_MAX_LENGTH, + SQLITE_MAX_SQL_LENGTH, + SQLITE_MAX_COLUMN, + SQLITE_MAX_EXPR_DEPTH, + SQLITE_MAX_COMPOUND_SELECT, + SQLITE_MAX_VDBE_OP, + SQLITE_MAX_FUNCTION_ARG, + SQLITE_MAX_ATTACHED, + SQLITE_MAX_LIKE_PATTERN_LENGTH, + SQLITE_MAX_VARIABLE_NUMBER, /* IMP: R-38091-32352 */ + SQLITE_MAX_TRIGGER_DEPTH, + SQLITE_MAX_WORKER_THREADS, +}; + +/* +** Make sure the hard limits are set to reasonable values +*/ +#if SQLITE_MAX_LENGTH<100 +# error SQLITE_MAX_LENGTH must be at least 100 +#endif +#if SQLITE_MAX_SQL_LENGTH<100 +# error SQLITE_MAX_SQL_LENGTH must be at least 100 +#endif +#if SQLITE_MAX_SQL_LENGTH>SQLITE_MAX_LENGTH +# error SQLITE_MAX_SQL_LENGTH must not be greater than SQLITE_MAX_LENGTH +#endif +#if SQLITE_MAX_COMPOUND_SELECT<2 +# error SQLITE_MAX_COMPOUND_SELECT must be at least 2 +#endif +#if SQLITE_MAX_VDBE_OP<40 +# error SQLITE_MAX_VDBE_OP must be at least 40 +#endif +#if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>127 +# error SQLITE_MAX_FUNCTION_ARG must be between 0 and 127 +#endif +#if SQLITE_MAX_ATTACHED<0 || SQLITE_MAX_ATTACHED>125 +# error SQLITE_MAX_ATTACHED must be between 0 and 125 +#endif +#if SQLITE_MAX_LIKE_PATTERN_LENGTH<1 +# error SQLITE_MAX_LIKE_PATTERN_LENGTH must be at least 1 +#endif +#if SQLITE_MAX_COLUMN>32767 +# error SQLITE_MAX_COLUMN must not exceed 32767 +#endif +#if SQLITE_MAX_TRIGGER_DEPTH<1 +# error SQLITE_MAX_TRIGGER_DEPTH must be at least 1 +#endif +#if SQLITE_MAX_WORKER_THREADS<0 || SQLITE_MAX_WORKER_THREADS>50 +# error SQLITE_MAX_WORKER_THREADS must be between 0 and 50 +#endif + + +/* +** Change the value of a limit. Report the old value. +** If an invalid limit index is supplied, report -1. +** Make no changes but still report the old value if the +** new limit is negative. +** +** A new lower limit does not shrink existing constructs. +** It merely prevents new constructs that exceed the limit +** from forming. +*/ +int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){ + int oldLimit; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return -1; + } +#endif + + /* EVIDENCE-OF: R-30189-54097 For each limit category SQLITE_LIMIT_NAME + ** there is a hard upper bound set at compile-time by a C preprocessor + ** macro called SQLITE_MAX_NAME. (The "_LIMIT_" in the name is changed to + ** "_MAX_".) + */ + assert( aHardLimit[SQLITE_LIMIT_LENGTH]==SQLITE_MAX_LENGTH ); + assert( aHardLimit[SQLITE_LIMIT_SQL_LENGTH]==SQLITE_MAX_SQL_LENGTH ); + assert( aHardLimit[SQLITE_LIMIT_COLUMN]==SQLITE_MAX_COLUMN ); + assert( aHardLimit[SQLITE_LIMIT_EXPR_DEPTH]==SQLITE_MAX_EXPR_DEPTH ); + assert( aHardLimit[SQLITE_LIMIT_COMPOUND_SELECT]==SQLITE_MAX_COMPOUND_SELECT); + assert( aHardLimit[SQLITE_LIMIT_VDBE_OP]==SQLITE_MAX_VDBE_OP ); + assert( aHardLimit[SQLITE_LIMIT_FUNCTION_ARG]==SQLITE_MAX_FUNCTION_ARG ); + assert( aHardLimit[SQLITE_LIMIT_ATTACHED]==SQLITE_MAX_ATTACHED ); + assert( aHardLimit[SQLITE_LIMIT_LIKE_PATTERN_LENGTH]== + SQLITE_MAX_LIKE_PATTERN_LENGTH ); + assert( aHardLimit[SQLITE_LIMIT_VARIABLE_NUMBER]==SQLITE_MAX_VARIABLE_NUMBER); + assert( aHardLimit[SQLITE_LIMIT_TRIGGER_DEPTH]==SQLITE_MAX_TRIGGER_DEPTH ); + assert( aHardLimit[SQLITE_LIMIT_WORKER_THREADS]==SQLITE_MAX_WORKER_THREADS ); + assert( SQLITE_LIMIT_WORKER_THREADS==(SQLITE_N_LIMIT-1) ); + + + if( limitId<0 || limitId>=SQLITE_N_LIMIT ){ + return -1; + } + oldLimit = db->aLimit[limitId]; + if( newLimit>=0 ){ /* IMP: R-52476-28732 */ + if( newLimit>aHardLimit[limitId] ){ + newLimit = aHardLimit[limitId]; /* IMP: R-51463-25634 */ + }else if( newLimit<1 && limitId==SQLITE_LIMIT_LENGTH ){ + newLimit = 1; + } + db->aLimit[limitId] = newLimit; + } + return oldLimit; /* IMP: R-53341-35419 */ +} + +/* +** This function is used to parse both URIs and non-URI filenames passed by the +** user to API functions sqlite3_open() or sqlite3_open_v2(), and for database +** URIs specified as part of ATTACH statements. +** +** The first argument to this function is the name of the VFS to use (or +** a NULL to signify the default VFS) if the URI does not contain a "vfs=xxx" +** query parameter. The second argument contains the URI (or non-URI filename) +** itself. When this function is called the *pFlags variable should contain +** the default flags to open the database handle with. The value stored in +** *pFlags may be updated before returning if the URI filename contains +** "cache=xxx" or "mode=xxx" query parameters. +** +** If successful, SQLITE_OK is returned. In this case *ppVfs is set to point to +** the VFS that should be used to open the database file. *pzFile is set to +** point to a buffer containing the name of the file to open. The value +** stored in *pzFile is a database name acceptable to sqlite3_uri_parameter() +** and is in the same format as names created using sqlite3_create_filename(). +** The caller must invoke sqlite3_free_filename() (not sqlite3_free()!) on +** the value returned in *pzFile to avoid a memory leak. +** +** If an error occurs, then an SQLite error code is returned and *pzErrMsg +** may be set to point to a buffer containing an English language error +** message. It is the responsibility of the caller to eventually release +** this buffer by calling sqlite3_free(). +*/ +int sqlite3ParseUri( + const char *zDefaultVfs, /* VFS to use if no "vfs=xxx" query option */ + const char *zUri, /* Nul-terminated URI to parse */ + unsigned int *pFlags, /* IN/OUT: SQLITE_OPEN_XXX flags */ + sqlite3_vfs **ppVfs, /* OUT: VFS to use */ + char **pzFile, /* OUT: Filename component of URI */ + char **pzErrMsg /* OUT: Error message (if rc!=SQLITE_OK) */ +){ + int rc = SQLITE_OK; + unsigned int flags = *pFlags; + const char *zVfs = zDefaultVfs; + char *zFile; + char c; + int nUri = sqlite3Strlen30(zUri); + + assert( *pzErrMsg==0 ); + + if( ((flags & SQLITE_OPEN_URI) /* IMP: R-48725-32206 */ + || AtomicLoad(&sqlite3GlobalConfig.bOpenUri)) /* IMP: R-51689-46548 */ + && nUri>=5 && memcmp(zUri, "file:", 5)==0 /* IMP: R-57884-37496 */ + ){ + char *zOpt; + int eState; /* Parser state when parsing URI */ + int iIn; /* Input character index */ + int iOut = 0; /* Output character index */ + u64 nByte = nUri+8; /* Bytes of space to allocate */ + + /* Make sure the SQLITE_OPEN_URI flag is set to indicate to the VFS xOpen + ** method that there may be extra parameters following the file-name. */ + flags |= SQLITE_OPEN_URI; + + for(iIn=0; iIn<nUri; iIn++) nByte += (zUri[iIn]=='&'); + zFile = sqlite3_malloc64(nByte); + if( !zFile ) return SQLITE_NOMEM_BKPT; + + memset(zFile, 0, 4); /* 4-byte of 0x00 is the start of DB name marker */ + zFile += 4; + + iIn = 5; +#ifdef SQLITE_ALLOW_URI_AUTHORITY + if( strncmp(zUri+5, "///", 3)==0 ){ + iIn = 7; + /* The following condition causes URIs with five leading / characters + ** like file://///host/path to be converted into UNCs like //host/path. + ** The correct URI for that UNC has only two or four leading / characters + ** file://host/path or file:////host/path. But 5 leading slashes is a + ** common error, we are told, so we handle it as a special case. */ + if( strncmp(zUri+7, "///", 3)==0 ){ iIn++; } + }else if( strncmp(zUri+5, "//localhost/", 12)==0 ){ + iIn = 16; + } +#else + /* Discard the scheme and authority segments of the URI. */ + if( zUri[5]=='/' && zUri[6]=='/' ){ + iIn = 7; + while( zUri[iIn] && zUri[iIn]!='/' ) iIn++; + if( iIn!=7 && (iIn!=16 || memcmp("localhost", &zUri[7], 9)) ){ + *pzErrMsg = sqlite3_mprintf("invalid uri authority: %.*s", + iIn-7, &zUri[7]); + rc = SQLITE_ERROR; + goto parse_uri_out; + } + } +#endif + + /* Copy the filename and any query parameters into the zFile buffer. + ** Decode %HH escape codes along the way. + ** + ** Within this loop, variable eState may be set to 0, 1 or 2, depending + ** on the parsing context. As follows: + ** + ** 0: Parsing file-name. + ** 1: Parsing name section of a name=value query parameter. + ** 2: Parsing value section of a name=value query parameter. + */ + eState = 0; + while( (c = zUri[iIn])!=0 && c!='#' ){ + iIn++; + if( c=='%' + && sqlite3Isxdigit(zUri[iIn]) + && sqlite3Isxdigit(zUri[iIn+1]) + ){ + int octet = (sqlite3HexToInt(zUri[iIn++]) << 4); + octet += sqlite3HexToInt(zUri[iIn++]); + + assert( octet>=0 && octet<256 ); + if( octet==0 ){ +#ifndef SQLITE_ENABLE_URI_00_ERROR + /* This branch is taken when "%00" appears within the URI. In this + ** case we ignore all text in the remainder of the path, name or + ** value currently being parsed. So ignore the current character + ** and skip to the next "?", "=" or "&", as appropriate. */ + while( (c = zUri[iIn])!=0 && c!='#' + && (eState!=0 || c!='?') + && (eState!=1 || (c!='=' && c!='&')) + && (eState!=2 || c!='&') + ){ + iIn++; + } + continue; +#else + /* If ENABLE_URI_00_ERROR is defined, "%00" in a URI is an error. */ + *pzErrMsg = sqlite3_mprintf("unexpected %%00 in uri"); + rc = SQLITE_ERROR; + goto parse_uri_out; +#endif + } + c = octet; + }else if( eState==1 && (c=='&' || c=='=') ){ + if( zFile[iOut-1]==0 ){ + /* An empty option name. Ignore this option altogether. */ + while( zUri[iIn] && zUri[iIn]!='#' && zUri[iIn-1]!='&' ) iIn++; + continue; + } + if( c=='&' ){ + zFile[iOut++] = '\0'; + }else{ + eState = 2; + } + c = 0; + }else if( (eState==0 && c=='?') || (eState==2 && c=='&') ){ + c = 0; + eState = 1; + } + zFile[iOut++] = c; + } + if( eState==1 ) zFile[iOut++] = '\0'; + memset(zFile+iOut, 0, 4); /* end-of-options + empty journal filenames */ + + /* Check if there were any options specified that should be interpreted + ** here. Options that are interpreted here include "vfs" and those that + ** correspond to flags that may be passed to the sqlite3_open_v2() + ** method. */ + zOpt = &zFile[sqlite3Strlen30(zFile)+1]; + while( zOpt[0] ){ + int nOpt = sqlite3Strlen30(zOpt); + char *zVal = &zOpt[nOpt+1]; + int nVal = sqlite3Strlen30(zVal); + + if( nOpt==3 && memcmp("vfs", zOpt, 3)==0 ){ + zVfs = zVal; + }else{ + struct OpenMode { + const char *z; + int mode; + } *aMode = 0; + char *zModeType = 0; + int mask = 0; + int limit = 0; + + if( nOpt==5 && memcmp("cache", zOpt, 5)==0 ){ + static struct OpenMode aCacheMode[] = { + { "shared", SQLITE_OPEN_SHAREDCACHE }, + { "private", SQLITE_OPEN_PRIVATECACHE }, + { 0, 0 } + }; + + mask = SQLITE_OPEN_SHAREDCACHE|SQLITE_OPEN_PRIVATECACHE; + aMode = aCacheMode; + limit = mask; + zModeType = "cache"; + } + if( nOpt==4 && memcmp("mode", zOpt, 4)==0 ){ + static struct OpenMode aOpenMode[] = { + { "ro", SQLITE_OPEN_READONLY }, + { "rw", SQLITE_OPEN_READWRITE }, + { "rwc", SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE }, + { "memory", SQLITE_OPEN_MEMORY }, + { 0, 0 } + }; + + mask = SQLITE_OPEN_READONLY | SQLITE_OPEN_READWRITE + | SQLITE_OPEN_CREATE | SQLITE_OPEN_MEMORY; + aMode = aOpenMode; + limit = mask & flags; + zModeType = "access"; + } + + if( aMode ){ + int i; + int mode = 0; + for(i=0; aMode[i].z; i++){ + const char *z = aMode[i].z; + if( nVal==sqlite3Strlen30(z) && 0==memcmp(zVal, z, nVal) ){ + mode = aMode[i].mode; + break; + } + } + if( mode==0 ){ + *pzErrMsg = sqlite3_mprintf("no such %s mode: %s", zModeType, zVal); + rc = SQLITE_ERROR; + goto parse_uri_out; + } + if( (mode & ~SQLITE_OPEN_MEMORY)>limit ){ + *pzErrMsg = sqlite3_mprintf("%s mode not allowed: %s", + zModeType, zVal); + rc = SQLITE_PERM; + goto parse_uri_out; + } + flags = (flags & ~mask) | mode; + } + } + + zOpt = &zVal[nVal+1]; + } + + }else{ + zFile = sqlite3_malloc64(nUri+8); + if( !zFile ) return SQLITE_NOMEM_BKPT; + memset(zFile, 0, 4); + zFile += 4; + if( nUri ){ + memcpy(zFile, zUri, nUri); + } + memset(zFile+nUri, 0, 4); + flags &= ~SQLITE_OPEN_URI; + } + + *ppVfs = sqlite3_vfs_find(zVfs); + if( *ppVfs==0 ){ + *pzErrMsg = sqlite3_mprintf("no such vfs: %s", zVfs); + rc = SQLITE_ERROR; + } + parse_uri_out: + if( rc!=SQLITE_OK ){ + sqlite3_free_filename(zFile); + zFile = 0; + } + *pFlags = flags; + *pzFile = zFile; + return rc; +} + +/* +** This routine does the core work of extracting URI parameters from a +** database filename for the sqlite3_uri_parameter() interface. +*/ +static const char *uriParameter(const char *zFilename, const char *zParam){ + zFilename += sqlite3Strlen30(zFilename) + 1; + while( ALWAYS(zFilename!=0) && zFilename[0] ){ + int x = strcmp(zFilename, zParam); + zFilename += sqlite3Strlen30(zFilename) + 1; + if( x==0 ) return zFilename; + zFilename += sqlite3Strlen30(zFilename) + 1; + } + return 0; +} + + + +/* +** This routine does the work of opening a database on behalf of +** sqlite3_open() and sqlite3_open16(). The database filename "zFilename" +** is UTF-8 encoded. +*/ +static int openDatabase( + const char *zFilename, /* Database filename UTF-8 encoded */ + sqlite3 **ppDb, /* OUT: Returned database handle */ + unsigned int flags, /* Operational flags */ + const char *zVfs /* Name of the VFS to use */ +){ + sqlite3 *db; /* Store allocated handle here */ + int rc; /* Return code */ + int isThreadsafe; /* True for threadsafe connections */ + char *zOpen = 0; /* Filename argument to pass to BtreeOpen() */ + char *zErrMsg = 0; /* Error message from sqlite3ParseUri() */ + int i; /* Loop counter */ + +#ifdef SQLITE_ENABLE_API_ARMOR + if( ppDb==0 ) return SQLITE_MISUSE_BKPT; +#endif + *ppDb = 0; +#ifndef SQLITE_OMIT_AUTOINIT + rc = sqlite3_initialize(); + if( rc ) return rc; +#endif + + if( sqlite3GlobalConfig.bCoreMutex==0 ){ + isThreadsafe = 0; + }else if( flags & SQLITE_OPEN_NOMUTEX ){ + isThreadsafe = 0; + }else if( flags & SQLITE_OPEN_FULLMUTEX ){ + isThreadsafe = 1; + }else{ + isThreadsafe = sqlite3GlobalConfig.bFullMutex; + } + + if( flags & SQLITE_OPEN_PRIVATECACHE ){ + flags &= ~SQLITE_OPEN_SHAREDCACHE; + }else if( sqlite3GlobalConfig.sharedCacheEnabled ){ + flags |= SQLITE_OPEN_SHAREDCACHE; + } + + /* Remove harmful bits from the flags parameter + ** + ** The SQLITE_OPEN_NOMUTEX and SQLITE_OPEN_FULLMUTEX flags were + ** dealt with in the previous code block. Besides these, the only + ** valid input flags for sqlite3_open_v2() are SQLITE_OPEN_READONLY, + ** SQLITE_OPEN_READWRITE, SQLITE_OPEN_CREATE, SQLITE_OPEN_SHAREDCACHE, + ** SQLITE_OPEN_PRIVATECACHE, SQLITE_OPEN_EXRESCODE, and some reserved + ** bits. Silently mask off all other flags. + */ + flags &= ~( SQLITE_OPEN_DELETEONCLOSE | + SQLITE_OPEN_EXCLUSIVE | + SQLITE_OPEN_MAIN_DB | + SQLITE_OPEN_TEMP_DB | + SQLITE_OPEN_TRANSIENT_DB | + SQLITE_OPEN_MAIN_JOURNAL | + SQLITE_OPEN_TEMP_JOURNAL | + SQLITE_OPEN_SUBJOURNAL | + SQLITE_OPEN_SUPER_JOURNAL | + SQLITE_OPEN_NOMUTEX | + SQLITE_OPEN_FULLMUTEX | + SQLITE_OPEN_WAL + ); + + /* Allocate the sqlite data structure */ + db = sqlite3MallocZero( sizeof(sqlite3) ); + if( db==0 ) goto opendb_out; + if( isThreadsafe +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS + || sqlite3GlobalConfig.bCoreMutex +#endif + ){ + db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); + if( db->mutex==0 ){ + sqlite3_free(db); + db = 0; + goto opendb_out; + } + if( isThreadsafe==0 ){ + sqlite3MutexWarnOnContention(db->mutex); + } + } + sqlite3_mutex_enter(db->mutex); + db->errMask = (flags & SQLITE_OPEN_EXRESCODE)!=0 ? 0xffffffff : 0xff; + db->nDb = 2; + db->eOpenState = SQLITE_STATE_BUSY; + db->aDb = db->aDbStatic; + db->lookaside.bDisable = 1; + db->lookaside.sz = 0; + + assert( sizeof(db->aLimit)==sizeof(aHardLimit) ); + memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit)); + db->aLimit[SQLITE_LIMIT_WORKER_THREADS] = SQLITE_DEFAULT_WORKER_THREADS; + db->autoCommit = 1; + db->nextAutovac = -1; + db->szMmap = sqlite3GlobalConfig.szMmap; + db->nextPagesize = 0; + db->init.azInit = sqlite3StdType; /* Any array of string ptrs will do */ +#ifdef SQLITE_ENABLE_SORTER_MMAP + /* Beginning with version 3.37.0, using the VFS xFetch() API to memory-map + ** the temporary files used to do external sorts (see code in vdbesort.c) + ** is disabled. It can still be used either by defining + ** SQLITE_ENABLE_SORTER_MMAP at compile time or by using the + ** SQLITE_TESTCTRL_SORTER_MMAP test-control at runtime. */ + db->nMaxSorterMmap = 0x7FFFFFFF; +#endif + db->flags |= SQLITE_ShortColNames + | SQLITE_EnableTrigger + | SQLITE_EnableView + | SQLITE_CacheSpill +#if !defined(SQLITE_TRUSTED_SCHEMA) || SQLITE_TRUSTED_SCHEMA+0!=0 + | SQLITE_TrustedSchema +#endif +/* The SQLITE_DQS compile-time option determines the default settings +** for SQLITE_DBCONFIG_DQS_DDL and SQLITE_DBCONFIG_DQS_DML. +** +** SQLITE_DQS SQLITE_DBCONFIG_DQS_DDL SQLITE_DBCONFIG_DQS_DML +** ---------- ----------------------- ----------------------- +** undefined on on +** 3 on on +** 2 on off +** 1 off on +** 0 off off +** +** Legacy behavior is 3 (double-quoted string literals are allowed anywhere) +** and so that is the default. But developers are encouraged to use +** -DSQLITE_DQS=0 (best) or -DSQLITE_DQS=1 (second choice) if possible. +*/ +#if !defined(SQLITE_DQS) +# define SQLITE_DQS 3 +#endif +#if (SQLITE_DQS&1)==1 + | SQLITE_DqsDML +#endif +#if (SQLITE_DQS&2)==2 + | SQLITE_DqsDDL +#endif + +#if !defined(SQLITE_DEFAULT_AUTOMATIC_INDEX) || SQLITE_DEFAULT_AUTOMATIC_INDEX + | SQLITE_AutoIndex +#endif +#if SQLITE_DEFAULT_CKPTFULLFSYNC + | SQLITE_CkptFullFSync +#endif +#if SQLITE_DEFAULT_FILE_FORMAT<4 + | SQLITE_LegacyFileFmt +#endif +#ifdef SQLITE_ENABLE_LOAD_EXTENSION + | SQLITE_LoadExtension +#endif +#if SQLITE_DEFAULT_RECURSIVE_TRIGGERS + | SQLITE_RecTriggers +#endif +#if defined(SQLITE_DEFAULT_FOREIGN_KEYS) && SQLITE_DEFAULT_FOREIGN_KEYS + | SQLITE_ForeignKeys +#endif +#if defined(SQLITE_REVERSE_UNORDERED_SELECTS) + | SQLITE_ReverseOrder +#endif +#if defined(SQLITE_ENABLE_OVERSIZE_CELL_CHECK) + | SQLITE_CellSizeCk +#endif +#if defined(SQLITE_ENABLE_FTS3_TOKENIZER) + | SQLITE_Fts3Tokenizer +#endif +#if defined(SQLITE_ENABLE_QPSG) + | SQLITE_EnableQPSG +#endif +#if defined(SQLITE_DEFAULT_DEFENSIVE) + | SQLITE_Defensive +#endif +#if defined(SQLITE_DEFAULT_LEGACY_ALTER_TABLE) + | SQLITE_LegacyAlter +#endif +#if defined(SQLITE_ENABLE_STMT_SCANSTATUS) + | SQLITE_StmtScanStatus +#endif + ; + sqlite3HashInit(&db->aCollSeq); +#ifndef SQLITE_OMIT_VIRTUALTABLE + sqlite3HashInit(&db->aModule); +#endif + + /* Add the default collation sequence BINARY. BINARY works for both UTF-8 + ** and UTF-16, so add a version for each to avoid any unnecessary + ** conversions. The only error that can occur here is a malloc() failure. + ** + ** EVIDENCE-OF: R-52786-44878 SQLite defines three built-in collating + ** functions: + */ + createCollation(db, sqlite3StrBINARY, SQLITE_UTF8, 0, binCollFunc, 0); + createCollation(db, sqlite3StrBINARY, SQLITE_UTF16BE, 0, binCollFunc, 0); + createCollation(db, sqlite3StrBINARY, SQLITE_UTF16LE, 0, binCollFunc, 0); + createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0); + createCollation(db, "RTRIM", SQLITE_UTF8, 0, rtrimCollFunc, 0); + if( db->mallocFailed ){ + goto opendb_out; + } + +#if SQLITE_OS_UNIX && defined(SQLITE_OS_KV_OPTIONAL) + /* Process magic filenames ":localStorage:" and ":sessionStorage:" */ + if( zFilename && zFilename[0]==':' ){ + if( strcmp(zFilename, ":localStorage:")==0 ){ + zFilename = "file:local?vfs=kvvfs"; + flags |= SQLITE_OPEN_URI; + }else if( strcmp(zFilename, ":sessionStorage:")==0 ){ + zFilename = "file:session?vfs=kvvfs"; + flags |= SQLITE_OPEN_URI; + } + } +#endif /* SQLITE_OS_UNIX && defined(SQLITE_OS_KV_OPTIONAL) */ + + /* Parse the filename/URI argument + ** + ** Only allow sensible combinations of bits in the flags argument. + ** Throw an error if any non-sense combination is used. If we + ** do not block illegal combinations here, it could trigger + ** assert() statements in deeper layers. Sensible combinations + ** are: + ** + ** 1: SQLITE_OPEN_READONLY + ** 2: SQLITE_OPEN_READWRITE + ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE + */ + db->openFlags = flags; + assert( SQLITE_OPEN_READONLY == 0x01 ); + assert( SQLITE_OPEN_READWRITE == 0x02 ); + assert( SQLITE_OPEN_CREATE == 0x04 ); + testcase( (1<<(flags&7))==0x02 ); /* READONLY */ + testcase( (1<<(flags&7))==0x04 ); /* READWRITE */ + testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */ + if( ((1<<(flags&7)) & 0x46)==0 ){ + rc = SQLITE_MISUSE_BKPT; /* IMP: R-18321-05872 */ + }else{ + rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg); + } + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ) sqlite3OomFault(db); + sqlite3ErrorWithMsg(db, rc, zErrMsg ? "%s" : 0, zErrMsg); + sqlite3_free(zErrMsg); + goto opendb_out; + } + assert( db->pVfs!=0 ); +#if SQLITE_OS_KV || defined(SQLITE_OS_KV_OPTIONAL) + if( sqlite3_stricmp(db->pVfs->zName, "kvvfs")==0 ){ + db->temp_store = 2; + } +#endif + + /* Open the backend database driver */ + rc = sqlite3BtreeOpen(db->pVfs, zOpen, db, &db->aDb[0].pBt, 0, + flags | SQLITE_OPEN_MAIN_DB); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_IOERR_NOMEM ){ + rc = SQLITE_NOMEM_BKPT; + } + sqlite3Error(db, rc); + goto opendb_out; + } + sqlite3BtreeEnter(db->aDb[0].pBt); + db->aDb[0].pSchema = sqlite3SchemaGet(db, db->aDb[0].pBt); + if( !db->mallocFailed ){ + sqlite3SetTextEncoding(db, SCHEMA_ENC(db)); + } + sqlite3BtreeLeave(db->aDb[0].pBt); + db->aDb[1].pSchema = sqlite3SchemaGet(db, 0); + + /* The default safety_level for the main database is FULL; for the temp + ** database it is OFF. This matches the pager layer defaults. + */ + db->aDb[0].zDbSName = "main"; + db->aDb[0].safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1; + db->aDb[1].zDbSName = "temp"; + db->aDb[1].safety_level = PAGER_SYNCHRONOUS_OFF; + + db->eOpenState = SQLITE_STATE_OPEN; + if( db->mallocFailed ){ + goto opendb_out; + } + + /* Register all built-in functions, but do not attempt to read the + ** database schema yet. This is delayed until the first time the database + ** is accessed. + */ + sqlite3Error(db, SQLITE_OK); + sqlite3RegisterPerConnectionBuiltinFunctions(db); + rc = sqlite3_errcode(db); + + + /* Load compiled-in extensions */ + for(i=0; rc==SQLITE_OK && i<ArraySize(sqlite3BuiltinExtensions); i++){ + rc = sqlite3BuiltinExtensions[i](db); + } + + /* Load automatic extensions - extensions that have been registered + ** using the sqlite3_automatic_extension() API. + */ + if( rc==SQLITE_OK ){ + sqlite3AutoLoadExtensions(db); + rc = sqlite3_errcode(db); + if( rc!=SQLITE_OK ){ + goto opendb_out; + } + } + +#ifdef SQLITE_ENABLE_INTERNAL_FUNCTIONS + /* Testing use only!!! The -DSQLITE_ENABLE_INTERNAL_FUNCTIONS=1 compile-time + ** option gives access to internal functions by default. + ** Testing use only!!! */ + db->mDbFlags |= DBFLAG_InternalFunc; +#endif + + /* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking + ** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking + ** mode. Doing nothing at all also makes NORMAL the default. + */ +#ifdef SQLITE_DEFAULT_LOCKING_MODE + db->dfltLockMode = SQLITE_DEFAULT_LOCKING_MODE; + sqlite3PagerLockingMode(sqlite3BtreePager(db->aDb[0].pBt), + SQLITE_DEFAULT_LOCKING_MODE); +#endif + + if( rc ) sqlite3Error(db, rc); + + /* Enable the lookaside-malloc subsystem */ + setupLookaside(db, 0, sqlite3GlobalConfig.szLookaside, + sqlite3GlobalConfig.nLookaside); + + sqlite3_wal_autocheckpoint(db, SQLITE_DEFAULT_WAL_AUTOCHECKPOINT); + +opendb_out: + if( db ){ + assert( db->mutex!=0 || isThreadsafe==0 + || sqlite3GlobalConfig.bFullMutex==0 ); + sqlite3_mutex_leave(db->mutex); + } + rc = sqlite3_errcode(db); + assert( db!=0 || (rc&0xff)==SQLITE_NOMEM ); + if( (rc&0xff)==SQLITE_NOMEM ){ + sqlite3_close(db); + db = 0; + }else if( rc!=SQLITE_OK ){ + db->eOpenState = SQLITE_STATE_SICK; + } + *ppDb = db; +#ifdef SQLITE_ENABLE_SQLLOG + if( sqlite3GlobalConfig.xSqllog ){ + /* Opening a db handle. Fourth parameter is passed 0. */ + void *pArg = sqlite3GlobalConfig.pSqllogArg; + sqlite3GlobalConfig.xSqllog(pArg, db, zFilename, 0); + } +#endif + sqlite3_free_filename(zOpen); + return rc; +} + + +/* +** Open a new database handle. +*/ +int sqlite3_open( + const char *zFilename, + sqlite3 **ppDb +){ + return openDatabase(zFilename, ppDb, + SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); +} +int sqlite3_open_v2( + const char *filename, /* Database filename (UTF-8) */ + sqlite3 **ppDb, /* OUT: SQLite db handle */ + int flags, /* Flags */ + const char *zVfs /* Name of VFS module to use */ +){ + return openDatabase(filename, ppDb, (unsigned int)flags, zVfs); +} + +#ifndef SQLITE_OMIT_UTF16 +/* +** Open a new database handle. +*/ +int sqlite3_open16( + const void *zFilename, + sqlite3 **ppDb +){ + char const *zFilename8; /* zFilename encoded in UTF-8 instead of UTF-16 */ + sqlite3_value *pVal; + int rc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( ppDb==0 ) return SQLITE_MISUSE_BKPT; +#endif + *ppDb = 0; +#ifndef SQLITE_OMIT_AUTOINIT + rc = sqlite3_initialize(); + if( rc ) return rc; +#endif + if( zFilename==0 ) zFilename = "\000\000"; + pVal = sqlite3ValueNew(0); + sqlite3ValueSetStr(pVal, -1, zFilename, SQLITE_UTF16NATIVE, SQLITE_STATIC); + zFilename8 = sqlite3ValueText(pVal, SQLITE_UTF8); + if( zFilename8 ){ + rc = openDatabase(zFilename8, ppDb, + SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0); + assert( *ppDb || rc==SQLITE_NOMEM ); + if( rc==SQLITE_OK && !DbHasProperty(*ppDb, 0, DB_SchemaLoaded) ){ + SCHEMA_ENC(*ppDb) = ENC(*ppDb) = SQLITE_UTF16NATIVE; + } + }else{ + rc = SQLITE_NOMEM_BKPT; + } + sqlite3ValueFree(pVal); + + return rc & 0xff; +} +#endif /* SQLITE_OMIT_UTF16 */ + +/* +** Register a new collation sequence with the database handle db. +*/ +int sqlite3_create_collation( + sqlite3* db, + const char *zName, + int enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*) +){ + return sqlite3_create_collation_v2(db, zName, enc, pCtx, xCompare, 0); +} + +/* +** Register a new collation sequence with the database handle db. +*/ +int sqlite3_create_collation_v2( + sqlite3* db, + const char *zName, + int enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*), + void(*xDel)(void*) +){ + int rc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + rc = createCollation(db, zName, (u8)enc, pCtx, xCompare, xDel); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +#ifndef SQLITE_OMIT_UTF16 +/* +** Register a new collation sequence with the database handle db. +*/ +int sqlite3_create_collation16( + sqlite3* db, + const void *zName, + int enc, + void* pCtx, + int(*xCompare)(void*,int,const void*,int,const void*) +){ + int rc = SQLITE_OK; + char *zName8; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zName==0 ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + assert( !db->mallocFailed ); + zName8 = sqlite3Utf16to8(db, zName, -1, SQLITE_UTF16NATIVE); + if( zName8 ){ + rc = createCollation(db, zName8, (u8)enc, pCtx, xCompare, 0); + sqlite3DbFree(db, zName8); + } + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} +#endif /* SQLITE_OMIT_UTF16 */ + +/* +** Register a collation sequence factory callback with the database handle +** db. Replace any previously installed collation sequence factory. +*/ +int sqlite3_collation_needed( + sqlite3 *db, + void *pCollNeededArg, + void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*) +){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + db->xCollNeeded = xCollNeeded; + db->xCollNeeded16 = 0; + db->pCollNeededArg = pCollNeededArg; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + +#ifndef SQLITE_OMIT_UTF16 +/* +** Register a collation sequence factory callback with the database handle +** db. Replace any previously installed collation sequence factory. +*/ +int sqlite3_collation_needed16( + sqlite3 *db, + void *pCollNeededArg, + void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*) +){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + db->xCollNeeded = 0; + db->xCollNeeded16 = xCollNeeded16; + db->pCollNeededArg = pCollNeededArg; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} +#endif /* SQLITE_OMIT_UTF16 */ + +/* +** Find existing client data. +*/ +void *sqlite3_get_clientdata(sqlite3 *db, const char *zName){ + DbClientData *p; + sqlite3_mutex_enter(db->mutex); + for(p=db->pDbData; p; p=p->pNext){ + if( strcmp(p->zName, zName)==0 ){ + void *pResult = p->pData; + sqlite3_mutex_leave(db->mutex); + return pResult; + } + } + sqlite3_mutex_leave(db->mutex); + return 0; +} + +/* +** Add new client data to a database connection. +*/ +int sqlite3_set_clientdata( + sqlite3 *db, /* Attach client data to this connection */ + const char *zName, /* Name of the client data */ + void *pData, /* The client data itself */ + void (*xDestructor)(void*) /* Destructor */ +){ + DbClientData *p, **pp; + sqlite3_mutex_enter(db->mutex); + pp = &db->pDbData; + for(p=db->pDbData; p && strcmp(p->zName,zName); p=p->pNext){ + pp = &p->pNext; + } + if( p ){ + assert( p->pData!=0 ); + if( p->xDestructor ) p->xDestructor(p->pData); + if( pData==0 ){ + *pp = p->pNext; + sqlite3_free(p); + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; + } + }else if( pData==0 ){ + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; + }else{ + size_t n = strlen(zName); + p = sqlite3_malloc64( sizeof(DbClientData)+n+1 ); + if( p==0 ){ + if( xDestructor ) xDestructor(pData); + sqlite3_mutex_leave(db->mutex); + return SQLITE_NOMEM; + } + memcpy(p->zName, zName, n+1); + p->pNext = db->pDbData; + db->pDbData = p; + } + p->pData = pData; + p->xDestructor = xDestructor; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + + +#ifndef SQLITE_OMIT_DEPRECATED +/* +** This function is now an anachronism. It used to be used to recover from a +** malloc() failure, but SQLite now does this automatically. +*/ +int sqlite3_global_recover(void){ + return SQLITE_OK; +} +#endif + +/* +** Test to see whether or not the database connection is in autocommit +** mode. Return TRUE if it is and FALSE if not. Autocommit mode is on +** by default. Autocommit is disabled by a BEGIN statement and reenabled +** by the next COMMIT or ROLLBACK. +*/ +int sqlite3_get_autocommit(sqlite3 *db){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + return db->autoCommit; +} + +/* +** The following routines are substitutes for constants SQLITE_CORRUPT, +** SQLITE_MISUSE, SQLITE_CANTOPEN, SQLITE_NOMEM and possibly other error +** constants. They serve two purposes: +** +** 1. Serve as a convenient place to set a breakpoint in a debugger +** to detect when version error conditions occurs. +** +** 2. Invoke sqlite3_log() to provide the source code location where +** a low-level error is first detected. +*/ +int sqlite3ReportError(int iErr, int lineno, const char *zType){ + sqlite3_log(iErr, "%s at line %d of [%.10s]", + zType, lineno, 20+sqlite3_sourceid()); + return iErr; +} +int sqlite3CorruptError(int lineno){ + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_CORRUPT, lineno, "database corruption"); +} +int sqlite3MisuseError(int lineno){ + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_MISUSE, lineno, "misuse"); +} +int sqlite3CantopenError(int lineno){ + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_CANTOPEN, lineno, "cannot open file"); +} +#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_CORRUPT_PGNO) +int sqlite3CorruptPgnoError(int lineno, Pgno pgno){ + char zMsg[100]; + sqlite3_snprintf(sizeof(zMsg), zMsg, "database corruption page %d", pgno); + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg); +} +#endif +#ifdef SQLITE_DEBUG +int sqlite3NomemError(int lineno){ + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_NOMEM, lineno, "OOM"); +} +int sqlite3IoerrnomemError(int lineno){ + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_IOERR_NOMEM, lineno, "I/O OOM error"); +} +#endif + +#ifndef SQLITE_OMIT_DEPRECATED +/* +** This is a convenience routine that makes sure that all thread-specific +** data for this thread has been deallocated. +** +** SQLite no longer uses thread-specific data so this routine is now a +** no-op. It is retained for historical compatibility. +*/ +void sqlite3_thread_cleanup(void){ +} +#endif + +/* +** Return meta information about a specific column of a database table. +** See comment in sqlite3.h (sqlite.h.in) for details. +*/ +int sqlite3_table_column_metadata( + sqlite3 *db, /* Connection handle */ + const char *zDbName, /* Database name or NULL */ + const char *zTableName, /* Table name */ + const char *zColumnName, /* Column name */ + char const **pzDataType, /* OUTPUT: Declared data type */ + char const **pzCollSeq, /* OUTPUT: Collation sequence name */ + int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */ + int *pPrimaryKey, /* OUTPUT: True if column part of PK */ + int *pAutoinc /* OUTPUT: True if column is auto-increment */ +){ + int rc; + char *zErrMsg = 0; + Table *pTab = 0; + Column *pCol = 0; + int iCol = 0; + char const *zDataType = 0; + char const *zCollSeq = 0; + int notnull = 0; + int primarykey = 0; + int autoinc = 0; + + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) || zTableName==0 ){ + return SQLITE_MISUSE_BKPT; + } +#endif + + /* Ensure the database schema has been loaded */ + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + rc = sqlite3Init(db, &zErrMsg); + if( SQLITE_OK!=rc ){ + goto error_out; + } + + /* Locate the table in question */ + pTab = sqlite3FindTable(db, zTableName, zDbName); + if( !pTab || IsView(pTab) ){ + pTab = 0; + goto error_out; + } + + /* Find the column for which info is requested */ + if( zColumnName==0 ){ + /* Query for existence of table only */ + }else{ + for(iCol=0; iCol<pTab->nCol; iCol++){ + pCol = &pTab->aCol[iCol]; + if( 0==sqlite3StrICmp(pCol->zCnName, zColumnName) ){ + break; + } + } + if( iCol==pTab->nCol ){ + if( HasRowid(pTab) && sqlite3IsRowid(zColumnName) ){ + iCol = pTab->iPKey; + pCol = iCol>=0 ? &pTab->aCol[iCol] : 0; + }else{ + pTab = 0; + goto error_out; + } + } + } + + /* The following block stores the meta information that will be returned + ** to the caller in local variables zDataType, zCollSeq, notnull, primarykey + ** and autoinc. At this point there are two possibilities: + ** + ** 1. The specified column name was rowid", "oid" or "_rowid_" + ** and there is no explicitly declared IPK column. + ** + ** 2. The table is not a view and the column name identified an + ** explicitly declared column. Copy meta information from *pCol. + */ + if( pCol ){ + zDataType = sqlite3ColumnType(pCol,0); + zCollSeq = sqlite3ColumnColl(pCol); + notnull = pCol->notNull!=0; + primarykey = (pCol->colFlags & COLFLAG_PRIMKEY)!=0; + autoinc = pTab->iPKey==iCol && (pTab->tabFlags & TF_Autoincrement)!=0; + }else{ + zDataType = "INTEGER"; + primarykey = 1; + } + if( !zCollSeq ){ + zCollSeq = sqlite3StrBINARY; + } + +error_out: + sqlite3BtreeLeaveAll(db); + + /* Whether the function call succeeded or failed, set the output parameters + ** to whatever their local counterparts contain. If an error did occur, + ** this has the effect of zeroing all output parameters. + */ + if( pzDataType ) *pzDataType = zDataType; + if( pzCollSeq ) *pzCollSeq = zCollSeq; + if( pNotNull ) *pNotNull = notnull; + if( pPrimaryKey ) *pPrimaryKey = primarykey; + if( pAutoinc ) *pAutoinc = autoinc; + + if( SQLITE_OK==rc && !pTab ){ + sqlite3DbFree(db, zErrMsg); + zErrMsg = sqlite3MPrintf(db, "no such table column: %s.%s", zTableName, + zColumnName); + rc = SQLITE_ERROR; + } + sqlite3ErrorWithMsg(db, rc, (zErrMsg?"%s":0), zErrMsg); + sqlite3DbFree(db, zErrMsg); + rc = sqlite3ApiExit(db, rc); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** Sleep for a little while. Return the amount of time slept. +*/ +int sqlite3_sleep(int ms){ + sqlite3_vfs *pVfs; + int rc; + pVfs = sqlite3_vfs_find(0); + if( pVfs==0 ) return 0; + + /* This function works in milliseconds, but the underlying OsSleep() + ** API uses microseconds. Hence the 1000's. + */ + rc = (sqlite3OsSleep(pVfs, ms<0 ? 0 : 1000*ms)/1000); + return rc; +} + +/* +** Enable or disable the extended result codes. +*/ +int sqlite3_extended_result_codes(sqlite3 *db, int onoff){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + db->errMask = onoff ? 0xffffffff : 0xff; + sqlite3_mutex_leave(db->mutex); + return SQLITE_OK; +} + +/* +** Invoke the xFileControl method on a particular database. +*/ +int sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){ + int rc = SQLITE_ERROR; + Btree *pBtree; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; +#endif + sqlite3_mutex_enter(db->mutex); + pBtree = sqlite3DbNameToBtree(db, zDbName); + if( pBtree ){ + Pager *pPager; + sqlite3_file *fd; + sqlite3BtreeEnter(pBtree); + pPager = sqlite3BtreePager(pBtree); + assert( pPager!=0 ); + fd = sqlite3PagerFile(pPager); + assert( fd!=0 ); + if( op==SQLITE_FCNTL_FILE_POINTER ){ + *(sqlite3_file**)pArg = fd; + rc = SQLITE_OK; + }else if( op==SQLITE_FCNTL_VFS_POINTER ){ + *(sqlite3_vfs**)pArg = sqlite3PagerVfs(pPager); + rc = SQLITE_OK; + }else if( op==SQLITE_FCNTL_JOURNAL_POINTER ){ + *(sqlite3_file**)pArg = sqlite3PagerJrnlFile(pPager); + rc = SQLITE_OK; + }else if( op==SQLITE_FCNTL_DATA_VERSION ){ + *(unsigned int*)pArg = sqlite3PagerDataVersion(pPager); + rc = SQLITE_OK; + }else if( op==SQLITE_FCNTL_RESERVE_BYTES ){ + int iNew = *(int*)pArg; + *(int*)pArg = sqlite3BtreeGetRequestedReserve(pBtree); + if( iNew>=0 && iNew<=255 ){ + sqlite3BtreeSetPageSize(pBtree, 0, iNew, 0); + } + rc = SQLITE_OK; + }else if( op==SQLITE_FCNTL_RESET_CACHE ){ + sqlite3BtreeClearCache(pBtree); + rc = SQLITE_OK; + }else{ + int nSave = db->busyHandler.nBusy; + rc = sqlite3OsFileControl(fd, op, pArg); + db->busyHandler.nBusy = nSave; + } + sqlite3BtreeLeave(pBtree); + } + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** Interface to the testing logic. +*/ +int sqlite3_test_control(int op, ...){ + int rc = 0; +#ifdef SQLITE_UNTESTABLE + UNUSED_PARAMETER(op); +#else + va_list ap; + va_start(ap, op); + switch( op ){ + + /* + ** Save the current state of the PRNG. + */ + case SQLITE_TESTCTRL_PRNG_SAVE: { + sqlite3PrngSaveState(); + break; + } + + /* + ** Restore the state of the PRNG to the last state saved using + ** PRNG_SAVE. If PRNG_SAVE has never before been called, then + ** this verb acts like PRNG_RESET. + */ + case SQLITE_TESTCTRL_PRNG_RESTORE: { + sqlite3PrngRestoreState(); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_PRNG_SEED, int x, sqlite3 *db); + ** + ** Control the seed for the pseudo-random number generator (PRNG) that + ** is built into SQLite. Cases: + ** + ** x!=0 && db!=0 Seed the PRNG to the current value of the + ** schema cookie in the main database for db, or + ** x if the schema cookie is zero. This case + ** is convenient to use with database fuzzers + ** as it allows the fuzzer some control over the + ** the PRNG seed. + ** + ** x!=0 && db==0 Seed the PRNG to the value of x. + ** + ** x==0 && db==0 Revert to default behavior of using the + ** xRandomness method on the primary VFS. + ** + ** This test-control also resets the PRNG so that the new seed will + ** be used for the next call to sqlite3_randomness(). + */ +#ifndef SQLITE_OMIT_WSD + case SQLITE_TESTCTRL_PRNG_SEED: { + int x = va_arg(ap, int); + int y; + sqlite3 *db = va_arg(ap, sqlite3*); + assert( db==0 || db->aDb[0].pSchema!=0 ); + if( db && (y = db->aDb[0].pSchema->schema_cookie)!=0 ){ x = y; } + sqlite3Config.iPrngSeed = x; + sqlite3_randomness(0,0); + break; + } +#endif + + /* sqlite3_test_control(SQLITE_TESTCTRL_FK_NO_ACTION, sqlite3 *db, int b); + ** + ** If b is true, then activate the SQLITE_FkNoAction setting. If b is + ** false then clearn that setting. If the SQLITE_FkNoAction setting is + ** abled, all foreign key ON DELETE and ON UPDATE actions behave as if + ** they were NO ACTION, regardless of how they are defined. + ** + ** NB: One must usually run "PRAGMA writable_schema=RESET" after + ** using this test-control, before it will take full effect. failing + ** to reset the schema can result in some unexpected behavior. + */ + case SQLITE_TESTCTRL_FK_NO_ACTION: { + sqlite3 *db = va_arg(ap, sqlite3*); + int b = va_arg(ap, int); + if( b ){ + db->flags |= SQLITE_FkNoAction; + }else{ + db->flags &= ~SQLITE_FkNoAction; + } + break; + } + + /* + ** sqlite3_test_control(BITVEC_TEST, size, program) + ** + ** Run a test against a Bitvec object of size. The program argument + ** is an array of integers that defines the test. Return -1 on a + ** memory allocation error, 0 on success, or non-zero for an error. + ** See the sqlite3BitvecBuiltinTest() for additional information. + */ + case SQLITE_TESTCTRL_BITVEC_TEST: { + int sz = va_arg(ap, int); + int *aProg = va_arg(ap, int*); + rc = sqlite3BitvecBuiltinTest(sz, aProg); + break; + } + + /* + ** sqlite3_test_control(FAULT_INSTALL, xCallback) + ** + ** Arrange to invoke xCallback() whenever sqlite3FaultSim() is called, + ** if xCallback is not NULL. + ** + ** As a test of the fault simulator mechanism itself, sqlite3FaultSim(0) + ** is called immediately after installing the new callback and the return + ** value from sqlite3FaultSim(0) becomes the return from + ** sqlite3_test_control(). + */ + case SQLITE_TESTCTRL_FAULT_INSTALL: { + /* A bug in MSVC prevents it from understanding pointers to functions + ** types in the second argument to va_arg(). Work around the problem + ** using a typedef. + ** http://support.microsoft.com/kb/47961 <-- dead hyperlink + ** Search at http://web.archive.org/ to find the 2015-03-16 archive + ** of the link above to see the original text. + ** sqlite3GlobalConfig.xTestCallback = va_arg(ap, int(*)(int)); + */ + typedef int(*sqlite3FaultFuncType)(int); + sqlite3GlobalConfig.xTestCallback = va_arg(ap, sqlite3FaultFuncType); + rc = sqlite3FaultSim(0); + break; + } + + /* + ** sqlite3_test_control(BENIGN_MALLOC_HOOKS, xBegin, xEnd) + ** + ** Register hooks to call to indicate which malloc() failures + ** are benign. + */ + case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: { + typedef void (*void_function)(void); + void_function xBenignBegin; + void_function xBenignEnd; + xBenignBegin = va_arg(ap, void_function); + xBenignEnd = va_arg(ap, void_function); + sqlite3BenignMallocHooks(xBenignBegin, xBenignEnd); + break; + } + + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_PENDING_BYTE, unsigned int X) + ** + ** Set the PENDING byte to the value in the argument, if X>0. + ** Make no changes if X==0. Return the value of the pending byte + ** as it existing before this routine was called. + ** + ** IMPORTANT: Changing the PENDING byte from 0x40000000 results in + ** an incompatible database file format. Changing the PENDING byte + ** while any database connection is open results in undefined and + ** deleterious behavior. + */ + case SQLITE_TESTCTRL_PENDING_BYTE: { + rc = PENDING_BYTE; +#ifndef SQLITE_OMIT_WSD + { + unsigned int newVal = va_arg(ap, unsigned int); + if( newVal ) sqlite3PendingByte = newVal; + } +#endif + break; + } + + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_ASSERT, int X) + ** + ** This action provides a run-time test to see whether or not + ** assert() was enabled at compile-time. If X is true and assert() + ** is enabled, then the return value is true. If X is true and + ** assert() is disabled, then the return value is zero. If X is + ** false and assert() is enabled, then the assertion fires and the + ** process aborts. If X is false and assert() is disabled, then the + ** return value is zero. + */ + case SQLITE_TESTCTRL_ASSERT: { + volatile int x = 0; + assert( /*side-effects-ok*/ (x = va_arg(ap,int))!=0 ); + rc = x; +#if defined(SQLITE_DEBUG) + /* Invoke these debugging routines so that the compiler does not + ** issue "defined but not used" warnings. */ + if( x==9999 ){ + sqlite3ShowExpr(0); + sqlite3ShowExpr(0); + sqlite3ShowExprList(0); + sqlite3ShowIdList(0); + sqlite3ShowSrcList(0); + sqlite3ShowWith(0); + sqlite3ShowUpsert(0); +#ifndef SQLITE_OMIT_TRIGGER + sqlite3ShowTriggerStep(0); + sqlite3ShowTriggerStepList(0); + sqlite3ShowTrigger(0); + sqlite3ShowTriggerList(0); +#endif +#ifndef SQLITE_OMIT_WINDOWFUNC + sqlite3ShowWindow(0); + sqlite3ShowWinFunc(0); +#endif + sqlite3ShowSelect(0); + } +#endif + break; + } + + + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_ALWAYS, int X) + ** + ** This action provides a run-time test to see how the ALWAYS and + ** NEVER macros were defined at compile-time. + ** + ** The return value is ALWAYS(X) if X is true, or 0 if X is false. + ** + ** The recommended test is X==2. If the return value is 2, that means + ** ALWAYS() and NEVER() are both no-op pass-through macros, which is the + ** default setting. If the return value is 1, then ALWAYS() is either + ** hard-coded to true or else it asserts if its argument is false. + ** The first behavior (hard-coded to true) is the case if + ** SQLITE_TESTCTRL_ASSERT shows that assert() is disabled and the second + ** behavior (assert if the argument to ALWAYS() is false) is the case if + ** SQLITE_TESTCTRL_ASSERT shows that assert() is enabled. + ** + ** The run-time test procedure might look something like this: + ** + ** if( sqlite3_test_control(SQLITE_TESTCTRL_ALWAYS, 2)==2 ){ + ** // ALWAYS() and NEVER() are no-op pass-through macros + ** }else if( sqlite3_test_control(SQLITE_TESTCTRL_ASSERT, 1) ){ + ** // ALWAYS(x) asserts that x is true. NEVER(x) asserts x is false. + ** }else{ + ** // ALWAYS(x) is a constant 1. NEVER(x) is a constant 0. + ** } + */ + case SQLITE_TESTCTRL_ALWAYS: { + int x = va_arg(ap,int); + rc = x ? ALWAYS(x) : 0; + break; + } + + /* + ** sqlite3_test_control(SQLITE_TESTCTRL_BYTEORDER); + ** + ** The integer returned reveals the byte-order of the computer on which + ** SQLite is running: + ** + ** 1 big-endian, determined at run-time + ** 10 little-endian, determined at run-time + ** 432101 big-endian, determined at compile-time + ** 123410 little-endian, determined at compile-time + */ + case SQLITE_TESTCTRL_BYTEORDER: { + rc = SQLITE_BYTEORDER*100 + SQLITE_LITTLEENDIAN*10 + SQLITE_BIGENDIAN; + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_OPTIMIZATIONS, sqlite3 *db, int N) + ** + ** Enable or disable various optimizations for testing purposes. The + ** argument N is a bitmask of optimizations to be disabled. For normal + ** operation N should be 0. The idea is that a test program (like the + ** SQL Logic Test or SLT test module) can run the same SQL multiple times + ** with various optimizations disabled to verify that the same answer + ** is obtained in every case. + */ + case SQLITE_TESTCTRL_OPTIMIZATIONS: { + sqlite3 *db = va_arg(ap, sqlite3*); + db->dbOptFlags = va_arg(ap, u32); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, onoff, xAlt); + ** + ** If parameter onoff is 1, subsequent calls to localtime() fail. + ** If 2, then invoke xAlt() instead of localtime(). If 0, normal + ** processing. + ** + ** xAlt arguments are void pointers, but they really want to be: + ** + ** int xAlt(const time_t*, struct tm*); + ** + ** xAlt should write results in to struct tm object of its 2nd argument + ** and return zero on success, or return non-zero on failure. + */ + case SQLITE_TESTCTRL_LOCALTIME_FAULT: { + sqlite3GlobalConfig.bLocaltimeFault = va_arg(ap, int); + if( sqlite3GlobalConfig.bLocaltimeFault==2 ){ + typedef int(*sqlite3LocaltimeType)(const void*,void*); + sqlite3GlobalConfig.xAltLocaltime = va_arg(ap, sqlite3LocaltimeType); + }else{ + sqlite3GlobalConfig.xAltLocaltime = 0; + } + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_INTERNAL_FUNCTIONS, sqlite3*); + ** + ** Toggle the ability to use internal functions on or off for + ** the database connection given in the argument. + */ + case SQLITE_TESTCTRL_INTERNAL_FUNCTIONS: { + sqlite3 *db = va_arg(ap, sqlite3*); + db->mDbFlags ^= DBFLAG_InternalFunc; + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_NEVER_CORRUPT, int); + ** + ** Set or clear a flag that indicates that the database file is always well- + ** formed and never corrupt. This flag is clear by default, indicating that + ** database files might have arbitrary corruption. Setting the flag during + ** testing causes certain assert() statements in the code to be activated + ** that demonstrate invariants on well-formed database files. + */ + case SQLITE_TESTCTRL_NEVER_CORRUPT: { + sqlite3GlobalConfig.neverCorrupt = va_arg(ap, int); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_EXTRA_SCHEMA_CHECKS, int); + ** + ** Set or clear a flag that causes SQLite to verify that type, name, + ** and tbl_name fields of the sqlite_schema table. This is normally + ** on, but it is sometimes useful to turn it off for testing. + ** + ** 2020-07-22: Disabling EXTRA_SCHEMA_CHECKS also disables the + ** verification of rootpage numbers when parsing the schema. This + ** is useful to make it easier to reach strange internal error states + ** during testing. The EXTRA_SCHEMA_CHECKS setting is always enabled + ** in production. + */ + case SQLITE_TESTCTRL_EXTRA_SCHEMA_CHECKS: { + sqlite3GlobalConfig.bExtraSchemaChecks = va_arg(ap, int); + break; + } + + /* Set the threshold at which OP_Once counters reset back to zero. + ** By default this is 0x7ffffffe (over 2 billion), but that value is + ** too big to test in a reasonable amount of time, so this control is + ** provided to set a small and easily reachable reset value. + */ + case SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD: { + sqlite3GlobalConfig.iOnceResetThreshold = va_arg(ap, int); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_VDBE_COVERAGE, xCallback, ptr); + ** + ** Set the VDBE coverage callback function to xCallback with context + ** pointer ptr. + */ + case SQLITE_TESTCTRL_VDBE_COVERAGE: { +#ifdef SQLITE_VDBE_COVERAGE + typedef void (*branch_callback)(void*,unsigned int, + unsigned char,unsigned char); + sqlite3GlobalConfig.xVdbeBranch = va_arg(ap,branch_callback); + sqlite3GlobalConfig.pVdbeBranchArg = va_arg(ap,void*); +#endif + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_SORTER_MMAP, db, nMax); */ + case SQLITE_TESTCTRL_SORTER_MMAP: { + sqlite3 *db = va_arg(ap, sqlite3*); + db->nMaxSorterMmap = va_arg(ap, int); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_ISINIT); + ** + ** Return SQLITE_OK if SQLite has been initialized and SQLITE_ERROR if + ** not. + */ + case SQLITE_TESTCTRL_ISINIT: { + if( sqlite3GlobalConfig.isInit==0 ) rc = SQLITE_ERROR; + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_IMPOSTER, db, dbName, onOff, tnum); + ** + ** This test control is used to create imposter tables. "db" is a pointer + ** to the database connection. dbName is the database name (ex: "main" or + ** "temp") which will receive the imposter. "onOff" turns imposter mode on + ** or off. "tnum" is the root page of the b-tree to which the imposter + ** table should connect. + ** + ** Enable imposter mode only when the schema has already been parsed. Then + ** run a single CREATE TABLE statement to construct the imposter table in + ** the parsed schema. Then turn imposter mode back off again. + ** + ** If onOff==0 and tnum>0 then reset the schema for all databases, causing + ** the schema to be reparsed the next time it is needed. This has the + ** effect of erasing all imposter tables. + */ + case SQLITE_TESTCTRL_IMPOSTER: { + sqlite3 *db = va_arg(ap, sqlite3*); + int iDb; + sqlite3_mutex_enter(db->mutex); + iDb = sqlite3FindDbName(db, va_arg(ap,const char*)); + if( iDb>=0 ){ + db->init.iDb = iDb; + db->init.busy = db->init.imposterTable = va_arg(ap,int); + db->init.newTnum = va_arg(ap,int); + if( db->init.busy==0 && db->init.newTnum>0 ){ + sqlite3ResetAllSchemasOfConnection(db); + } + } + sqlite3_mutex_leave(db->mutex); + break; + } + +#if defined(YYCOVERAGE) + /* sqlite3_test_control(SQLITE_TESTCTRL_PARSER_COVERAGE, FILE *out) + ** + ** This test control (only available when SQLite is compiled with + ** -DYYCOVERAGE) writes a report onto "out" that shows all + ** state/lookahead combinations in the parser state machine + ** which are never exercised. If any state is missed, make the + ** return code SQLITE_ERROR. + */ + case SQLITE_TESTCTRL_PARSER_COVERAGE: { + FILE *out = va_arg(ap, FILE*); + if( sqlite3ParserCoverage(out) ) rc = SQLITE_ERROR; + break; + } +#endif /* defined(YYCOVERAGE) */ + + /* sqlite3_test_control(SQLITE_TESTCTRL_RESULT_INTREAL, sqlite3_context*); + ** + ** This test-control causes the most recent sqlite3_result_int64() value + ** to be interpreted as a MEM_IntReal instead of as an MEM_Int. Normally, + ** MEM_IntReal values only arise during an INSERT operation of integer + ** values into a REAL column, so they can be challenging to test. This + ** test-control enables us to write an intreal() SQL function that can + ** inject an intreal() value at arbitrary places in an SQL statement, + ** for testing purposes. + */ + case SQLITE_TESTCTRL_RESULT_INTREAL: { + sqlite3_context *pCtx = va_arg(ap, sqlite3_context*); + sqlite3ResultIntReal(pCtx); + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_SEEK_COUNT, + ** sqlite3 *db, // Database connection + ** u64 *pnSeek // Write seek count here + ** ); + ** + ** This test-control queries the seek-counter on the "main" database + ** file. The seek-counter is written into *pnSeek and is then reset. + ** The seek-count is only available if compiled with SQLITE_DEBUG. + */ + case SQLITE_TESTCTRL_SEEK_COUNT: { + sqlite3 *db = va_arg(ap, sqlite3*); + u64 *pn = va_arg(ap, sqlite3_uint64*); + *pn = sqlite3BtreeSeekCount(db->aDb->pBt); + (void)db; /* Silence harmless unused variable warning */ + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_TRACEFLAGS, op, ptr) + ** + ** "ptr" is a pointer to a u32. + ** + ** op==0 Store the current sqlite3TreeTrace in *ptr + ** op==1 Set sqlite3TreeTrace to the value *ptr + ** op==2 Store the current sqlite3WhereTrace in *ptr + ** op==3 Set sqlite3WhereTrace to the value *ptr + */ + case SQLITE_TESTCTRL_TRACEFLAGS: { + int opTrace = va_arg(ap, int); + u32 *ptr = va_arg(ap, u32*); + switch( opTrace ){ + case 0: *ptr = sqlite3TreeTrace; break; + case 1: sqlite3TreeTrace = *ptr; break; + case 2: *ptr = sqlite3WhereTrace; break; + case 3: sqlite3WhereTrace = *ptr; break; + } + break; + } + + /* sqlite3_test_control(SQLITE_TESTCTRL_LOGEST, + ** double fIn, // Input value + ** int *pLogEst, // sqlite3LogEstFromDouble(fIn) + ** u64 *pInt, // sqlite3LogEstToInt(*pLogEst) + ** int *pLogEst2 // sqlite3LogEst(*pInt) + ** ); + ** + ** Test access for the LogEst conversion routines. + */ + case SQLITE_TESTCTRL_LOGEST: { + double rIn = va_arg(ap, double); + LogEst rLogEst = sqlite3LogEstFromDouble(rIn); + int *pI1 = va_arg(ap,int*); + u64 *pU64 = va_arg(ap,u64*); + int *pI2 = va_arg(ap,int*); + *pI1 = rLogEst; + *pU64 = sqlite3LogEstToInt(rLogEst); + *pI2 = sqlite3LogEst(*pU64); + break; + } + +#if !defined(SQLITE_OMIT_WSD) + /* sqlite3_test_control(SQLITE_TESTCTRL_USELONGDOUBLE, int X); + ** + ** X<0 Make no changes to the bUseLongDouble. Just report value. + ** X==0 Disable bUseLongDouble + ** X==1 Enable bUseLongDouble + ** X>=2 Set bUseLongDouble to its default value for this platform + */ + case SQLITE_TESTCTRL_USELONGDOUBLE: { + int b = va_arg(ap, int); + if( b>=2 ) b = hasHighPrecisionDouble(b); + if( b>=0 ) sqlite3Config.bUseLongDouble = b>0; + rc = sqlite3Config.bUseLongDouble!=0; + break; + } +#endif + + +#if defined(SQLITE_DEBUG) && !defined(SQLITE_OMIT_WSD) + /* sqlite3_test_control(SQLITE_TESTCTRL_TUNE, id, *piValue) + ** + ** If "id" is an integer between 1 and SQLITE_NTUNE then set the value + ** of the id-th tuning parameter to *piValue. If "id" is between -1 + ** and -SQLITE_NTUNE, then write the current value of the (-id)-th + ** tuning parameter into *piValue. + ** + ** Tuning parameters are for use during transient development builds, + ** to help find the best values for constants in the query planner. + ** Access tuning parameters using the Tuning(ID) macro. Set the + ** parameters in the CLI using ".testctrl tune ID VALUE". + ** + ** Transient use only. Tuning parameters should not be used in + ** checked-in code. + */ + case SQLITE_TESTCTRL_TUNE: { + int id = va_arg(ap, int); + int *piValue = va_arg(ap, int*); + if( id>0 && id<=SQLITE_NTUNE ){ + Tuning(id) = *piValue; + }else if( id<0 && id>=-SQLITE_NTUNE ){ + *piValue = Tuning(-id); + }else{ + rc = SQLITE_NOTFOUND; + } + break; + } +#endif + + /* sqlite3_test_control(SQLITE_TESTCTRL_JSON_SELFCHECK, &onOff); + ** + ** Activate or deactivate validation of JSONB that is generated from + ** text. Off by default, as the validation is slow. Validation is + ** only available if compiled using SQLITE_DEBUG. + ** + ** If onOff is initially 1, then turn it on. If onOff is initially + ** off, turn it off. If onOff is initially -1, then change onOff + ** to be the current setting. + */ + case SQLITE_TESTCTRL_JSON_SELFCHECK: { +#if defined(SQLITE_DEBUG) && !defined(SQLITE_OMIT_WSD) + int *pOnOff = va_arg(ap, int*); + if( *pOnOff<0 ){ + *pOnOff = sqlite3Config.bJsonSelfcheck; + }else{ + sqlite3Config.bJsonSelfcheck = (u8)((*pOnOff)&0xff); + } +#endif + break; + } + } + va_end(ap); +#endif /* SQLITE_UNTESTABLE */ + return rc; +} + +/* +** The Pager stores the Database filename, Journal filename, and WAL filename +** consecutively in memory, in that order. The database filename is prefixed +** by four zero bytes. Locate the start of the database filename by searching +** backwards for the first byte following four consecutive zero bytes. +** +** This only works if the filename passed in was obtained from the Pager. +*/ +static const char *databaseName(const char *zName){ + while( zName[-1]!=0 || zName[-2]!=0 || zName[-3]!=0 || zName[-4]!=0 ){ + zName--; + } + return zName; +} + +/* +** Append text z[] to the end of p[]. Return a pointer to the first +** character after then zero terminator on the new text in p[]. +*/ +static char *appendText(char *p, const char *z){ + size_t n = strlen(z); + memcpy(p, z, n+1); + return p+n+1; +} + +/* +** Allocate memory to hold names for a database, journal file, WAL file, +** and query parameters. The pointer returned is valid for use by +** sqlite3_filename_database() and sqlite3_uri_parameter() and related +** functions. +** +** Memory layout must be compatible with that generated by the pager +** and expected by sqlite3_uri_parameter() and databaseName(). +*/ +const char *sqlite3_create_filename( + const char *zDatabase, + const char *zJournal, + const char *zWal, + int nParam, + const char **azParam +){ + sqlite3_int64 nByte; + int i; + char *pResult, *p; + nByte = strlen(zDatabase) + strlen(zJournal) + strlen(zWal) + 10; + for(i=0; i<nParam*2; i++){ + nByte += strlen(azParam[i])+1; + } + pResult = p = sqlite3_malloc64( nByte ); + if( p==0 ) return 0; + memset(p, 0, 4); + p += 4; + p = appendText(p, zDatabase); + for(i=0; i<nParam*2; i++){ + p = appendText(p, azParam[i]); + } + *(p++) = 0; + p = appendText(p, zJournal); + p = appendText(p, zWal); + *(p++) = 0; + *(p++) = 0; + assert( (sqlite3_int64)(p - pResult)==nByte ); + return pResult + 4; +} + +/* +** Free memory obtained from sqlite3_create_filename(). It is a severe +** error to call this routine with any parameter other than a pointer +** previously obtained from sqlite3_create_filename() or a NULL pointer. +*/ +void sqlite3_free_filename(const char *p){ + if( p==0 ) return; + p = databaseName(p); + sqlite3_free((char*)p - 4); +} + + +/* +** This is a utility routine, useful to VFS implementations, that checks +** to see if a database file was a URI that contained a specific query +** parameter, and if so obtains the value of the query parameter. +** +** The zFilename argument is the filename pointer passed into the xOpen() +** method of a VFS implementation. The zParam argument is the name of the +** query parameter we seek. This routine returns the value of the zParam +** parameter if it exists. If the parameter does not exist, this routine +** returns a NULL pointer. +*/ +const char *sqlite3_uri_parameter(const char *zFilename, const char *zParam){ + if( zFilename==0 || zParam==0 ) return 0; + zFilename = databaseName(zFilename); + return uriParameter(zFilename, zParam); +} + +/* +** Return a pointer to the name of Nth query parameter of the filename. +*/ +const char *sqlite3_uri_key(const char *zFilename, int N){ + if( zFilename==0 || N<0 ) return 0; + zFilename = databaseName(zFilename); + zFilename += sqlite3Strlen30(zFilename) + 1; + while( ALWAYS(zFilename) && zFilename[0] && (N--)>0 ){ + zFilename += sqlite3Strlen30(zFilename) + 1; + zFilename += sqlite3Strlen30(zFilename) + 1; + } + return zFilename[0] ? zFilename : 0; +} + +/* +** Return a boolean value for a query parameter. +*/ +int sqlite3_uri_boolean(const char *zFilename, const char *zParam, int bDflt){ + const char *z = sqlite3_uri_parameter(zFilename, zParam); + bDflt = bDflt!=0; + return z ? sqlite3GetBoolean(z, bDflt) : bDflt; +} + +/* +** Return a 64-bit integer value for a query parameter. +*/ +sqlite3_int64 sqlite3_uri_int64( + const char *zFilename, /* Filename as passed to xOpen */ + const char *zParam, /* URI parameter sought */ + sqlite3_int64 bDflt /* return if parameter is missing */ +){ + const char *z = sqlite3_uri_parameter(zFilename, zParam); + sqlite3_int64 v; + if( z && sqlite3DecOrHexToI64(z, &v)==0 ){ + bDflt = v; + } + return bDflt; +} + +/* +** Translate a filename that was handed to a VFS routine into the corresponding +** database, journal, or WAL file. +** +** It is an error to pass this routine a filename string that was not +** passed into the VFS from the SQLite core. Doing so is similar to +** passing free() a pointer that was not obtained from malloc() - it is +** an error that we cannot easily detect but that will likely cause memory +** corruption. +*/ +const char *sqlite3_filename_database(const char *zFilename){ + if( zFilename==0 ) return 0; + return databaseName(zFilename); +} +const char *sqlite3_filename_journal(const char *zFilename){ + if( zFilename==0 ) return 0; + zFilename = databaseName(zFilename); + zFilename += sqlite3Strlen30(zFilename) + 1; + while( ALWAYS(zFilename) && zFilename[0] ){ + zFilename += sqlite3Strlen30(zFilename) + 1; + zFilename += sqlite3Strlen30(zFilename) + 1; + } + return zFilename + 1; +} +const char *sqlite3_filename_wal(const char *zFilename){ +#ifdef SQLITE_OMIT_WAL + return 0; +#else + zFilename = sqlite3_filename_journal(zFilename); + if( zFilename ) zFilename += sqlite3Strlen30(zFilename) + 1; + return zFilename; +#endif +} + +/* +** Return the Btree pointer identified by zDbName. Return NULL if not found. +*/ +Btree *sqlite3DbNameToBtree(sqlite3 *db, const char *zDbName){ + int iDb = zDbName ? sqlite3FindDbName(db, zDbName) : 0; + return iDb<0 ? 0 : db->aDb[iDb].pBt; +} + +/* +** Return the name of the N-th database schema. Return NULL if N is out +** of range. +*/ +const char *sqlite3_db_name(sqlite3 *db, int N){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + if( N<0 || N>=db->nDb ){ + return 0; + }else{ + return db->aDb[N].zDbSName; + } +} + +/* +** Return the filename of the database associated with a database +** connection. +*/ +const char *sqlite3_db_filename(sqlite3 *db, const char *zDbName){ + Btree *pBt; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + pBt = sqlite3DbNameToBtree(db, zDbName); + return pBt ? sqlite3BtreeGetFilename(pBt) : 0; +} + +/* +** Return 1 if database is read-only or 0 if read/write. Return -1 if +** no such database exists. +*/ +int sqlite3_db_readonly(sqlite3 *db, const char *zDbName){ + Btree *pBt; +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return -1; + } +#endif + pBt = sqlite3DbNameToBtree(db, zDbName); + return pBt ? sqlite3BtreeIsReadonly(pBt) : -1; +} + +#ifdef SQLITE_ENABLE_SNAPSHOT +/* +** Obtain a snapshot handle for the snapshot of database zDb currently +** being read by handle db. +*/ +int sqlite3_snapshot_get( + sqlite3 *db, + const char *zDb, + sqlite3_snapshot **ppSnapshot +){ + int rc = SQLITE_ERROR; +#ifndef SQLITE_OMIT_WAL + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif + sqlite3_mutex_enter(db->mutex); + + if( db->autoCommit==0 ){ + int iDb = sqlite3FindDbName(db, zDb); + if( iDb==0 || iDb>1 ){ + Btree *pBt = db->aDb[iDb].pBt; + if( SQLITE_TXN_WRITE!=sqlite3BtreeTxnState(pBt) ){ + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSnapshotGet(sqlite3BtreePager(pBt), ppSnapshot); + } + } + } + } + + sqlite3_mutex_leave(db->mutex); +#endif /* SQLITE_OMIT_WAL */ + return rc; +} + +/* +** Open a read-transaction on the snapshot identified by pSnapshot. +*/ +int sqlite3_snapshot_open( + sqlite3 *db, + const char *zDb, + sqlite3_snapshot *pSnapshot +){ + int rc = SQLITE_ERROR; +#ifndef SQLITE_OMIT_WAL + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif + sqlite3_mutex_enter(db->mutex); + if( db->autoCommit==0 ){ + int iDb; + iDb = sqlite3FindDbName(db, zDb); + if( iDb==0 || iDb>1 ){ + Btree *pBt = db->aDb[iDb].pBt; + if( sqlite3BtreeTxnState(pBt)!=SQLITE_TXN_WRITE ){ + Pager *pPager = sqlite3BtreePager(pBt); + int bUnlock = 0; + if( sqlite3BtreeTxnState(pBt)!=SQLITE_TXN_NONE ){ + if( db->nVdbeActive==0 ){ + rc = sqlite3PagerSnapshotCheck(pPager, pSnapshot); + if( rc==SQLITE_OK ){ + bUnlock = 1; + rc = sqlite3BtreeCommit(pBt); + } + } + }else{ + rc = SQLITE_OK; + } + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSnapshotOpen(pPager, pSnapshot); + } + if( rc==SQLITE_OK ){ + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); + sqlite3PagerSnapshotOpen(pPager, 0); + } + if( bUnlock ){ + sqlite3PagerSnapshotUnlock(pPager); + } + } + } + } + + sqlite3_mutex_leave(db->mutex); +#endif /* SQLITE_OMIT_WAL */ + return rc; +} + +/* +** Recover as many snapshots as possible from the wal file associated with +** schema zDb of database db. +*/ +int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb){ + int rc = SQLITE_ERROR; +#ifndef SQLITE_OMIT_WAL + int iDb; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } +#endif + + sqlite3_mutex_enter(db->mutex); + iDb = sqlite3FindDbName(db, zDb); + if( iDb==0 || iDb>1 ){ + Btree *pBt = db->aDb[iDb].pBt; + if( SQLITE_TXN_NONE==sqlite3BtreeTxnState(pBt) ){ + rc = sqlite3BtreeBeginTrans(pBt, 0, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSnapshotRecover(sqlite3BtreePager(pBt)); + sqlite3BtreeCommit(pBt); + } + } + } + sqlite3_mutex_leave(db->mutex); +#endif /* SQLITE_OMIT_WAL */ + return rc; +} + +/* +** Free a snapshot handle obtained from sqlite3_snapshot_get(). +*/ +void sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){ + sqlite3_free(pSnapshot); +} +#endif /* SQLITE_ENABLE_SNAPSHOT */ + +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +/* +** Given the name of a compile-time option, return true if that option +** was used and false if not. +** +** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix +** is not required for a match. +*/ +int sqlite3_compileoption_used(const char *zOptName){ + int i, n; + int nOpt; + const char **azCompileOpt; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( zOptName==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + + azCompileOpt = sqlite3CompileOptions(&nOpt); + + if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7; + n = sqlite3Strlen30(zOptName); + + /* Since nOpt is normally in single digits, a linear search is + ** adequate. No need for a binary search. */ + for(i=0; i<nOpt; i++){ + if( sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0 + && sqlite3IsIdChar((unsigned char)azCompileOpt[i][n])==0 + ){ + return 1; + } + } + return 0; +} + +/* +** Return the N-th compile-time option string. If N is out of range, +** return a NULL pointer. +*/ +const char *sqlite3_compileoption_get(int N){ + int nOpt; + const char **azCompileOpt; + azCompileOpt = sqlite3CompileOptions(&nOpt); + if( N>=0 && N<nOpt ){ + return azCompileOpt[N]; + } + return 0; +} +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ |