Adding upstream version 1.9.15p5.upstream/1.9.15p5upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 209 insertions, 0 deletions

diff --git a/README.LDAP.md b/README.LDAP.md
new file mode 100644
index 0000000..7d3e97f
--- /dev/null
+++ b/README.LDAP.md
@@ -0,0 +1,209 @@
+This file explains how to build the optional LDAP functionality of SUDO to
+store /etc/sudoers information.  This feature is distinct from LDAP passwords.
+
+For general sudo LDAP configuration details, see the sudoers.ldap manual that
+comes with the sudo distribution.  A pre-formatted version of the manual may
+be found in the sudoers.ldap.cat file.
+
+The sudo binary compiled with LDAP support should be totally backward
+compatible and be syntactically and source code equivalent to its
+non LDAP-enabled build.
+
+## LDAP philosophy
+
+As times change and servers become cheap, an enterprise can easily have 500+
+UNIX servers.  Using LDAP to synchronize Users, Groups, Hosts, Mounts, and
+others across an enterprise can greatly reduce the administrative overhead.
+
+In the past, sudo has used a single local configuration file, /etc/sudoers.
+While the same sudoers file can be shared among machines, no built-in
+mechanism exists to distribute it.  Some have attempted to workaround this
+by synchronizing changes via CVS/RSYNC/RDIST/RCP/SCP and even NFS.
+
+By using LDAP for sudoers we gain a centrally administered, globally
+available configuration source for sudo.
+
+For information on OpenLDAP, see https://www.openldap.org/.
+
+## Definitions
+
+Many times the word 'Directory' is used in the document to refer to the LDAP
+server, structure, and contents.
+
+Many times 'options' are used in this document to refer to sudoer 'defaults'.
+They are one and the same.
+
+## Build instructions
+
+The simplest way to build sudo with LDAP support is to include the
+`--with-ldap` option.
+
+    $ ./configure --with-ldap
+
+If your ldap libraries and headers are in a non-standard place, you will need
+to specify them at configure time.  E.g.
+
+    $ ./configure --with-ldap=/usr/local/ldapsdk
+
+Sudo is developed using OpenLDAP but Netscape-based LDAP libraries
+(such as those present in Solaris) and IBM LDAP are also known to work.
+
+If special configuration was required to build an LDAP-enabled sudo,
+let the sudo workers mailing list <sudo-workers@sudo.ws> know so
+we can improve sudo.
+
+## Schema Changes
+
+You must add the appropriate schema to your LDAP server before it
+can store sudoers content.
+
+For OpenLDAP, there are two options, depending on how slapd is configured.
+
+The first option is to copy the file schema.OpenLDAP to the schema
+directory (e.g. /etc/openldap/schema).  You must then edit your
+slapd.conf and add an include line the new schema, for example:
+
+    # Sudo LDAP schema
+    include	/etc/openldap/schema/sudo.schema
+
+In order for sudoRole LDAP queries to be efficient, the server must index
+the attribute 'sudoUser', for example:
+
+    # Indices to maintain
+    index	sudoUser	eq
+
+After making the changes to slapd.conf, restart slapd.
+
+The second option is only for OpenLDAP 2.3 and higher where slapd.conf
+has been configured to use on-line configuration.  If your slapd.conf
+file includes the line:
+
+    database config
+
+it should be possible to use the schema.olcSudo file.
+
+You can apply schema.olcSudo using the ldapadd utility or another
+suitable LDAP browser.  For example:
+
+    # ldapadd -f schema.olcSudo -H ldap://ldapserver -W -x \
+      -D cn=Manager,dc=example,dc=com
+
+There is no need to restart slapd when updating on-line configuration.
+
+For Netscape-derived LDAP servers such as SunONE, iPlanet, or Fedora Directory,
+copy the schema.iPlanet file to the schema directory with the name 99sudo.ldif.
+
+On Solaris, schemas are stored in /var/Sun/mps/slapd-\`hostname\`/config/schema/.
+For Fedora Directory Server, they are stored in /etc/dirsrv/schema/.
+
+After copying the schema file to the appropriate directory, restart
+the LDAP server.
+
+Finally, using an LDAP browser/editor, enable indexing by editing the
+client profile to provide a Service Search Descriptor (SSD) for sudoers,
+replacing example.com with your domain:
+
+    serviceSearchDescriptor: sudoers: ou=sudoers,dc=example,dc=com
+
+If using an Active Directory server, copy schema.ActiveDirectory
+to your Windows domain controller and run the following command:
+
+    ldifde -i -f schema.ActiveDirectory -c dc=X dc=example,dc=com
+
+## Importing /etc/sudoers into LDAP
+
+Importing sudoers is a two-step process.
+
+1. Ask your LDAP Administrator where to create the ou=SUDOers container.
+   For instance, if using OpenLDAP:
+```
+    dn: ou=SUDOers,dc=example,dc=com
+    objectClass: top
+    objectClass: organizationalUnit
+    ou: SUDOers
+```
+
+(An example location is shown below).  Then use the cvtsudoers utility to
+convert your sudoers file into LDIF format.
+```
+    # SUDOERS_BASE=ou=SUDOers,dc=example,dc=com
+    # export SUDOERS_BASE
+    # cvtsudoers -f ldif -o /tmp/sudoers.ldif /etc/sudoers
+```
+
+2. Import into your directory server.  The following example is for
+   OpenLDAP.  If you are using another directory, provide the LDIF
+   file to your LDAP Administrator.
+```
+    # ldapadd -f /tmp/sudoers.ldif -H ldap://ldapserver \
+       -D cn=Manager,dc=example,dc=com -W -x
+```
+
+3.  Verify the sudoers LDAP data:
+```
+    # ldapsearch -b "$SUDOERS_BASE" -D cn=Manager,dc=example,dc=com -W -x
+```
+
+## Managing LDAP entries
+
+Doing a one-time bulk load of your ldap entries is fine.  However what if you
+need to make minor changes on a daily basis?  It doesn't make sense to delete
+and re-add objects.  (You can, but this is tedious).
+
+I recommend using any of the following LDAP browsers to administer your SUDOers.
+
+ * GQ - The gentleman's LDAP client - Open Source - I use this a lot on Linux
+   and since it is Schema aware, I don't need to create a sudoRole template.
+
+    https://sourceforge.net/projects/gqclient/
+
+ * phpQLAdmin - Open Source - phpQLAdmin is an administration tool,
+   originally for QmailLDAP, that supports editing sudoRole objects
+   in version 2.3.2 and higher.
+
+    http://phpqladmin.com/
+
+ * LDAP Browser/Editor - by Jarek Gawor - I use this a lot on Windows
+   and Solaris.  It runs anywhere in a Java Virtual Machine including
+   web pages.  You have to make a template from an existing sudoRole entry.
+
+    http://pi.hv.pl/Gawor%20ldapbrowser/
+
+ * Apache Directory Studio - Open Source - an Eclipse-based LDAP
+   development platform.  Includes an LDAP browser, and LDIF editor,
+   a schema editor and more.
+
+    https://directory.apache.org/studio
+
+  There are dozens of others, some Open Source, some free, some not.
+
+## Configure your /etc/ldap.conf and /etc/nsswitch.conf
+
+The /etc/ldap.conf file is meant to be shared between sudo, pam_ldap, nss_ldap
+and other ldap applications and modules.  IBM Secureway unfortunately uses
+the same file name but has a different syntax.  If you need to change where
+this file is stored, re-run configure with the `--with-ldap-conf-file=PATH`
+option.
+
+See the "Configuring ldap.conf" section in the sudoers.ldap manual
+for a list of supported ldap.conf parameters and an example ldap.conf
+
+Make sure you sudoers_base matches the location you specified when you
+imported the sudoers ldif data.
+
+After configuring /etc/ldap.conf, you must add a line in the
+/etc/nsswitch.conf file to tell sudo to look in LDAP for sudoers.
+See the "Configuring nsswitch.conf" section in the sudoers.ldap
+manual for details.  Sudo will use /etc/nsswitch.conf even if the
+underlying operating system does not support it.  To disable nsswitch
+support, run configure with the `--with-nsswitch=no` option.  This
+will cause sudo to consult LDAP first and /etc/sudoers second,
+unless the ignore_sudoers_file flag is set in the global LDAP options.
+
+## Debugging your LDAP configuration
+
+Enable debugging if you believe sudo is not parsing LDAP the way you think it
+should.  Setting the 'sudoers_debug' parameter to a value of 1 shows moderate
+debugging.  A value of 2 shows the results of the matches themselves.  Make
+sure to set the value back to zero so that other users don't get confused by
+the debugging messages.