summaryrefslogtreecommitdiffstats
path: root/man/loader.conf.xml
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-10 20:49:52 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-10 20:49:52 +0000
commit55944e5e40b1be2afc4855d8d2baf4b73d1876b5 (patch)
tree33f869f55a1b149e9b7c2b7e201867ca5dd52992 /man/loader.conf.xml
parentInitial commit. (diff)
downloadsystemd-55944e5e40b1be2afc4855d8d2baf4b73d1876b5.tar.xz
systemd-55944e5e40b1be2afc4855d8d2baf4b73d1876b5.zip
Adding upstream version 255.4.upstream/255.4
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'man/loader.conf.xml')
-rw-r--r--man/loader.conf.xml430
1 files changed, 430 insertions, 0 deletions
diff --git a/man/loader.conf.xml b/man/loader.conf.xml
new file mode 100644
index 0000000..a7db82d
--- /dev/null
+++ b/man/loader.conf.xml
@@ -0,0 +1,430 @@
+<?xml version='1.0'?> <!--*-nxml-*-->
+<!DOCTYPE refentry PUBLIC "-//OASIS//DTD DocBook XML V4.5//EN"
+ "http://www.oasis-open.org/docbook/xml/4.2/docbookx.dtd">
+<!-- SPDX-License-Identifier: LGPL-2.1-or-later -->
+
+<refentry id="loader.conf" conditional='ENABLE_BOOTLOADER'
+ xmlns:xi="http://www.w3.org/2001/XInclude">
+ <refentryinfo>
+ <title>loader.conf</title>
+ <productname>systemd</productname>
+ </refentryinfo>
+
+ <refmeta>
+ <refentrytitle>loader.conf</refentrytitle>
+ <manvolnum>5</manvolnum>
+ </refmeta>
+
+ <refnamediv>
+ <refname>loader.conf</refname>
+ <refpurpose>Configuration file for systemd-boot</refpurpose>
+ </refnamediv>
+
+ <refsynopsisdiv>
+ <para><filename><replaceable>ESP</replaceable>/loader/loader.conf</filename>,
+ <filename><replaceable>ESP</replaceable>/loader/entries/*.conf</filename>
+ <filename><replaceable>XBOOTLDR</replaceable>/loader/entries/*.conf</filename>
+ </para>
+ </refsynopsisdiv>
+
+ <refsect1>
+ <title>Description</title>
+
+ <para>
+ <citerefentry><refentrytitle>systemd-boot</refentrytitle><manvolnum>7</manvolnum></citerefentry> will
+ read <filename><replaceable>ESP</replaceable>/loader/loader.conf</filename>, and any files with the
+ <literal>.conf</literal> extension under
+ <filename><replaceable>ESP</replaceable>/loader/entries/</filename> on the EFI system partition (ESP),
+ and <filename><replaceable>XBOOTLDR</replaceable>/loader/entries/</filename> on the extended boot loader
+ partition (XBOOTLDR) as defined by <ulink url="https://uapi-group.org/specifications/specs/boot_loader_specification">Boot Loader
+ Specification</ulink>.
+ </para>
+
+ <para>Each of these configuration files must consist of series of newline (i.e. ASCII code 10) separated
+ lines, each consisting of an option name, followed by whitespace, and the option
+ value. <literal>#</literal> may be used to start a comment line. Empty and comment lines are ignored. The
+ files use UTF-8 encoding.</para>
+
+ <para>Boolean arguments may be written as
+ <literal>yes</literal>/<literal>y</literal>/<literal>true</literal>/<literal>t</literal>/<literal>on</literal>/<literal>1</literal> or
+ <literal>no</literal>/<literal>n</literal>/<literal>false</literal>/<literal>f</literal>/<literal>off</literal>/<literal>0</literal>.
+ </para>
+ </refsect1>
+
+ <refsect1>
+ <title>Options</title>
+
+ <para>The configuration options supported by
+ <filename><replaceable>ESP</replaceable>/loader/entries/*.conf</filename> and
+ <filename><replaceable>XBOOTLDR</replaceable>/loader/entries/*.conf</filename> files are defined as part
+ of the <ulink url="https://uapi-group.org/specifications/specs/boot_loader_specification">Boot Loader
+ Specification</ulink>.</para>
+
+ <para>The following configuration are supported by the <filename>loader.conf</filename> configuration
+ file:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term>default</term>
+
+ <listitem><para>A glob pattern to select the default entry. The default entry
+ may be changed in the boot menu itself, in which case the name of the
+ selected entry will be stored as an EFI variable, overriding this option.
+ </para>
+
+ <para>If set to <literal>@saved</literal> the chosen entry will be saved as an EFI variable
+ on every boot and automatically selected the next time the boot loader starts.</para>
+
+ <table>
+ <title>Automatically detected entries will use the following names:</title>
+
+ <tgroup cols='2'>
+ <colspec colname='name' />
+ <colspec colname='expl' />
+ <thead>
+ <row>
+ <entry>Name</entry>
+ <entry>Description</entry>
+ </row>
+ </thead>
+ <tbody>
+ <row>
+ <entry>auto-efi-default</entry>
+ <entry>EFI Default Loader</entry>
+ </row>
+ <row>
+ <entry>auto-efi-shell</entry>
+ <entry>EFI Shell</entry>
+ </row>
+ <row>
+ <entry>auto-osx</entry>
+ <entry>macOS</entry>
+ </row>
+ <row>
+ <entry>auto-poweroff</entry>
+ <entry>Power Off The System</entry>
+ </row>
+ <row>
+ <entry>auto-reboot</entry>
+ <entry>Reboot The System</entry>
+ </row>
+ <row>
+ <entry>auto-reboot-to-firmware-setup</entry>
+ <entry>Reboot Into Firmware Interface</entry>
+ </row>
+ <row>
+ <entry>auto-windows</entry>
+ <entry>Windows Boot Manager</entry>
+ </row>
+ </tbody>
+ </tgroup>
+ </table>
+
+ <para>Supported glob wildcard patterns are <literal>?</literal>, <literal>*</literal>, and
+ <literal>[…]</literal> (including ranges). Note that these patterns use the same syntax as
+ <citerefentry project='man-pages'><refentrytitle>glob</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ but do not support all features. In particular, set negation and named character classes are not
+ supported. The matching is done case-insensitively on the entry ID (as shown by <command>bootctl
+ list</command>).</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>timeout</term>
+
+ <listitem><para>How long the boot menu should be shown before the default
+ entry is booted, in seconds. This may be changed in the boot menu itself and
+ will be stored as an EFI variable in that case, overriding this option.
+ </para>
+
+ <para>If set to <literal>menu-disabled</literal> or <literal>menu-hidden</literal> or <literal>0</literal>
+ (the default), no menu is shown and the default entry will be booted immediately. Unless
+ <literal>menu-disabled</literal> is used, the menu can be shown
+ by pressing and holding a key before systemd-boot is launched. Setting this to
+ <literal>menu-force</literal> disables the timeout while always showing the menu.</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>console-mode</term>
+
+ <listitem><para>This option configures the resolution of the console. This may be changed in
+ the boot menu itself and will be stored as an EFI variable in that case, overriding this
+ option.</para>
+
+ <para>Takes a number or one of the special values listed below. The following
+ values may be used:</para>
+
+ <variablelist>
+ <varlistentry>
+ <term>0</term>
+ <listitem>
+ <para>Standard UEFI 80x25 mode</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>1</term>
+ <listitem>
+ <para>80x50 mode, not supported by all devices</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>2</term>
+ <listitem>
+ <para>the first non-standard mode provided by the device
+ firmware, if any</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>auto</term>
+ <listitem>
+ <para>Pick a suitable mode automatically using heuristics</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>max</term>
+ <listitem>
+ <para>Pick the highest-numbered available mode</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>keep</term>
+ <listitem>
+ <para>Keep the mode selected by firmware (the default)</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+ </listitem>
+ </varlistentry>
+ </variablelist>
+
+ <xi:include href="version-info.xml" xpointer="v239"/>
+
+ </listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>editor</term>
+
+ <listitem><para>Takes a boolean argument. Enable (the default) or disable the
+ editor. The editor should be disabled if the machine can be accessed by
+ unauthorized persons.</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>auto-entries</term>
+
+ <listitem><para>Takes a boolean argument. Enable (the default) or disable
+ entries for other boot entries found on the boot partition. In particular,
+ this may be useful when loader entries are created to show replacement
+ descriptions for those entries.</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>auto-firmware</term>
+
+ <listitem><para>A boolean controlling the presence of the <literal>Reboot Into Firmware
+ Interface</literal> entry (enabled by default). If this is disabled, the firmware interface may still
+ be reached by using the <keycap>f</keycap> key.</para>
+
+ <xi:include href="version-info.xml" xpointer="v239"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>beep</term>
+
+ <listitem><para>Takes a boolean argument. If timeout enabled beep every second, otherwise beep n times when n-th entry in boot menu is selected (default disabled).
+ Currently, only x86 is supported, where it uses the PC speaker.</para>
+
+ <xi:include href="version-info.xml" xpointer="v251"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>secure-boot-enroll</term>
+
+ <listitem><para>Danger: this feature might soft-brick your device if used improperly.</para>
+
+ <para>Controls enrollment of secure boot keys found on the ESP if the system is in setup mode:
+ <variablelist>
+ <varlistentry>
+ <term><option>off</option></term>
+ <listitem><para>No action is taken.</para>
+
+ <xi:include href="version-info.xml" xpointer="v253"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>manual</option></term>
+ <listitem><para>Boot entries for found secure boot keys are created that allow manual
+ enrollment.</para>
+
+ <xi:include href="version-info.xml" xpointer="v253"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>if-safe</option></term>
+ <listitem><para>Same behavior as <option>manual</option>, but will try to automatically
+ enroll the key <literal>auto</literal> if it is considered to be safe. Currently, this is only
+ the case if the system is running inside a virtual machine.</para>
+
+ <xi:include href="version-info.xml" xpointer="v253"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term><option>force</option></term>
+ <listitem><para>Always enroll the <literal>auto</literal> key if found. Note that a warning
+ message with a timeout will still be shown if this operation is unknown to be safe.</para>
+
+ <xi:include href="version-info.xml" xpointer="v253"/></listitem>
+ </varlistentry>
+ </variablelist>
+ </para>
+
+ <para>The different sets of variables can be set up under
+ <filename>/loader/keys/<replaceable>NAME</replaceable></filename> where
+ <replaceable>NAME</replaceable> is the name that is going to be used as the name of the entry. This
+ allows one to ship multiple sets of Secure Boot variables and choose which one to enroll at runtime.
+ </para>
+
+ <para>Supported Secure Boot variables are one database for authorized images, one for the key
+ exchange key (KEK) and one for the platform key (PK). For more information, refer to the
+ <ulink url="https://uefi.org/specifications">UEFI specification</ulink>, under Secure Boot and Driver
+ Signing. Another resource that describe the interplay of the different variables is the
+ <ulink url="https://edk2-docs.gitbook.io/understanding-the-uefi-secure-boot-chain/secure_boot_chain_in_uefi/uefi_secure_boot">
+ EDK2 documentation</ulink>.</para>
+
+ <para>A complete set of UEFI variable includes <filename>db.auth</filename>, <filename>KEK.auth</filename>
+ and <filename>PK.auth</filename>. Note that these files need to be authenticated UEFI variables. See
+ below for an example of how to generate them from regular X.509 keys.</para>
+
+ <programlisting>uuid=$(systemd-id128 new --uuid)
+for key in PK KEK db; do
+ openssl req -new -x509 -subj "/CN=${key}/" -keyout "${key}.key" -out "${key}.pem"
+ openssl x509 -outform DER -in "${key}.pem" -out "${key}.der"
+ sbsiglist --owner "${uuid}" --type x509 --output "${key}.esl" "${key}.der"
+done
+
+# See also: <ulink url="https://learn.microsoft.com/en-us/windows-hardware/manufacture/desktop/windows-secure-boot-key-creation-and-management-guidance">Windows Secure Boot Key Creation and Management Guidance</ulink>
+curl --location \
+ "https://go.microsoft.com/fwlink/p/?linkid=321192" -o ms-db-2011.der \
+ "https://go.microsoft.com/fwlink/p/?linkid=321185" -o ms-kek-2011.der \
+ "https://go.microsoft.com/fwlink/p/?linkid=321194" -o ms-uefi-db-2011.der \
+ "https://go.microsoft.com/fwlink/p/?linkid=2239776" -o ms-db-2023.der \
+ "https://go.microsoft.com/fwlink/p/?linkid=2239775" -o ms-kek-2023.der \
+ "https://go.microsoft.com/fwlink/p/?linkid=2239872" -o ms-uefi-db-2023.der
+sha1sum -c &lt;&lt;END
+580a6f4cc4e4b669b9ebdc1b2b3e087b80d0678d ms-db-2011.der
+31590bfd89c9d74ed087dfac66334b3931254b30 ms-kek-2011.der
+46def63b5ce61cf8ba0de2e6639c1019d0ed14f3 ms-uefi-db-2011.der
+45a0fa32604773c82433c3b7d59e7466b3ac0c67 ms-db-2023.der
+459ab6fb5e284d272d5e3e6abc8ed663829d632b ms-kek-2023.der
+b5eeb4a6706048073f0ed296e7f580a790b59eaa ms-uefi-db-2023.der
+END
+for key in ms-*.der; do
+ sbsiglist --owner 77fa9abd-0359-4d32-bd60-28f4e78f784b --type x509 --output "${key%der}esl" "${key}"
+done
+
+# Optionally add Microsoft Windows certificates (needed to boot into Windows).
+cat ms-db-*.esl >>db.esl
+
+# Optionally add Microsoft UEFI certificates for firmware drivers / option ROMs and third-party
+# boot loaders (including shim). This is highly recommended on real hardware as not including this
+# may soft-brick your device (see next paragraph).
+cat ms-uefi-*.esl >>db.esl
+
+# Optionally add Microsoft KEK certificates. Recommended if either of the Microsoft keys is used as
+# the official UEFI revocation database is signed with this key. The revocation database can be
+# updated with <citerefentry project='man-pages'><refentrytitle>fwupdmgr</refentrytitle><manvolnum>1</manvolnum></citerefentry>.
+cat ms-kek-*.esl >>KEK.esl
+
+attr=NON_VOLATILE,RUNTIME_ACCESS,BOOTSERVICE_ACCESS,TIME_BASED_AUTHENTICATED_WRITE_ACCESS
+sbvarsign --attr "${attr}" --key PK.key --cert PK.pem --output PK.auth PK PK.esl
+sbvarsign --attr "${attr}" --key PK.key --cert PK.pem --output KEK.auth KEK KEK.esl
+sbvarsign --attr "${attr}" --key KEK.key --cert KEK.pem --output db.auth db db.esl
+ </programlisting>
+
+ <para>This feature is considered dangerous because even if all the required files are signed with the
+ keys being loaded, some files necessary for the system to function properly still won't be. This
+ is especially the case with Option ROMs (e.g. for storage controllers or graphics cards). See
+ <ulink url="https://github.com/Foxboron/sbctl/wiki/FAQ#option-rom">Secure Boot and Option ROMs</ulink>
+ for more details.</para>
+
+ <xi:include href="version-info.xml" xpointer="v252"/></listitem>
+ </varlistentry>
+
+ <varlistentry>
+ <term>reboot-for-bitlocker</term>
+
+ <listitem><para>Caveat: This feature is experimental, and is likely to be changed (or removed in its
+ current form) in a future version of systemd.</para>
+
+ <para>Work around BitLocker requiring a recovery key when the boot loader was
+ updated (disabled by default).</para>
+
+ <para>Try to detect BitLocker encrypted drives along with an active TPM. If both are found and
+ Windows Boot Manager is selected in the boot menu, set the <literal>BootNext</literal> EFI variable
+ and restart the system. The firmware will then start Windows Boot Manager directly, leaving the TPM
+ PCRs in expected states so that Windows can unseal the encryption key. This allows
+ <citerefentry><refentrytitle>systemd-boot</refentrytitle><manvolnum>7</manvolnum></citerefentry> to
+ be updated without having to provide the recovery key for BitLocker drive unlocking.</para>
+
+ <para>Note that the PCRs that Windows uses can be configured with the
+ <literal>Configure TPM platform validation profile for native UEFI firmware configurations</literal>
+ group policy under <literal>Computer Configuration\Administrative Templates\Windows Components\BitLocker Drive Encryption</literal>.
+ When Secure Boot is enabled, changing this to PCRs <literal>0,2,7,11</literal> should be safe.
+ The TPM key protector needs to be removed and then added back for the PCRs on an already
+ encrypted drive to change. If PCR 4 is not measured, this setting can be disabled to speed
+ up booting into Windows.</para>
+
+ <xi:include href="version-info.xml" xpointer="v251"/></listitem>
+ </varlistentry>
+ </variablelist>
+ </refsect1>
+
+ <refsect1>
+ <title>Example</title>
+
+ <programlisting># /boot/efi/loader/loader.conf
+timeout 0
+default 01234567890abcdef1234567890abdf0-*
+editor no
+ </programlisting>
+
+ <para>The menu will not be shown by default (the menu can still be shown by
+ pressing and holding a key during boot). One of the entries with files with a
+ name starting with <literal>01234567890abcdef1234567890abdf0-</literal> will be
+ selected by default. If more than one entry matches, the one with the highest
+ priority will be selected (generally the one with the highest version number).
+ The editor will be disabled, so it is not possible to alter the kernel command
+ line.</para>
+ </refsect1>
+
+ <refsect1>
+ <title>See Also</title>
+ <para>
+ <citerefentry><refentrytitle>systemd-boot</refentrytitle><manvolnum>7</manvolnum></citerefentry>,
+ <citerefentry><refentrytitle>bootctl</refentrytitle><manvolnum>1</manvolnum></citerefentry>
+ </para>
+ </refsect1>
+</refentry>