Adding upstream version 256.upstream/256

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 274 insertions, 0 deletions

diff --git a/src/basic/build-path.c b/src/basic/build-path.c
new file mode 100644
index 0000000..b597265
--- /dev/null
+++ b/src/basic/build-path.c
@@ -0,0 +1,274 @@
+/* SPDX-License-Identifier: LGPL-2.1-or-later */
+
+#include <elf.h>
+#include <link.h>
+#include <sys/auxv.h>
+
+#include "build-path.h"
+#include "errno-list.h"
+#include "errno-util.h"
+#include "macro.h"
+#include "path-util.h"
+#include "process-util.h"
+#include "unistd.h"
+
+static int get_runpath_from_dynamic(const ElfW(Dyn) *d, ElfW(Addr) bias, const char **ret) {
+        size_t runpath_index = SIZE_MAX, rpath_index = SIZE_MAX;
+        const char *strtab = NULL;
+
+        assert(d);
+
+        /* Iterates through the PT_DYNAMIC section to find the DT_RUNPATH/DT_RPATH entries */
+
+        for (; d->d_tag != DT_NULL; d++) {
+
+                switch (d->d_tag) {
+
+                case DT_RUNPATH:
+                        runpath_index = (size_t) d->d_un.d_val;
+                        break;
+
+                case DT_RPATH:
+                        rpath_index = (size_t) d->d_un.d_val;
+                        break;
+
+                case DT_STRTAB:
+                        /* On MIPS and RISC-V DT_STRTAB records an offset, not a valid address, so it has to be adjusted
+                         * using the bias calculated earlier. */
+                        if (d->d_un.d_val != 0)
+                                strtab = (const char *) ((uintptr_t) d->d_un.d_val
+#if defined(__mips__) || defined(__riscv)
+                                         + bias
+#endif
+                                );
+                        break;
+                }
+
+                /* runpath wins, hence if we have the table and runpath we can exit the loop early */
+                if (strtab && runpath_index != SIZE_MAX)
+                        break;
+        }
+
+        if (!strtab)
+                return -ENOTRECOVERABLE;
+
+        /* According to ld.so runpath wins if both runpath and rpath are defined. */
+        if (runpath_index != SIZE_MAX) {
+                if (ret)
+                        *ret = strtab + runpath_index;
+                return 1;
+        }
+
+        if (rpath_index != SIZE_MAX) {
+                if (ret)
+                        *ret = strtab + rpath_index;
+                return 1;
+        }
+
+        if (ret)
+                *ret = NULL;
+
+        return 0;
+}
+
+static int get_runpath(const char **ret) {
+        unsigned long phdr, phent, phnum;
+
+        /* Finds the rpath/runpath in the program headers of the main executable we are running in */
+
+        phdr = getauxval(AT_PHDR);      /* Start offset of phdr */
+        if (phdr == 0)
+                return -ENOTRECOVERABLE;
+
+        phnum = getauxval(AT_PHNUM);    /* Number of entries in phdr */
+        if (phnum == 0)
+                return -ENOTRECOVERABLE;
+
+        phent = getauxval(AT_PHENT);    /* Size of entries in phdr */
+        if (phent < sizeof(ElfW(Phdr))) /* Safety check, that our idea of the structure matches the file */
+                return -ENOTRECOVERABLE;
+
+        ElfW(Addr) bias = 0, dyn = 0;
+        bool found_bias = false, found_dyn = false;
+
+        /* Iterate through the Phdr structures to find the PT_PHDR and PT_DYNAMIC sections */
+        for (unsigned long i = 0; i < phnum; i++) {
+                const ElfW(Phdr) *p = (const ElfW(Phdr)*) (phdr + (i * phent));
+
+                switch (p->p_type) {
+
+                case PT_PHDR:
+                        if (p->p_vaddr > phdr) /* safety overflow check */
+                                return -ENOTRECOVERABLE;
+
+                        bias = (ElfW(Addr)) phdr - p->p_vaddr;
+                        found_bias = true;
+                        break;
+
+                case PT_DYNAMIC:
+                        dyn = p->p_vaddr;
+                        found_dyn = true;
+                        break;
+                }
+
+                if (found_bias && found_dyn)
+                        break;
+        }
+
+        if (!found_dyn)
+                return -ENOTRECOVERABLE;
+
+        return get_runpath_from_dynamic((const ElfW(Dyn)*) (bias + dyn), bias, ret);
+}
+
+int get_build_exec_dir(char **ret) {
+        int r;
+
+        /* Returns the build execution directory if we are invoked in a build environment. Specifically, this
+         * checks if the main program binary has an rpath/runpath set (i.e. an explicit directory where to
+         * look for shared libraries) to $ORIGIN. If so we know that this is not a regular installed binary,
+         * but one which shall acquire its libraries from below a directory it is located in, i.e. a build
+         * directory or similar. In that case it typically makes sense to also search for our auxiliary
+         * executables we fork() off in a directory close to our main program binary, rather than in the
+         * system.
+         *
+         * This function is supposed to be used when looking for "callout" binaries that are closely related
+         * to the main program (i.e. speak a specific protocol between each other). And where it's generally
+         * a good idea to use the binary from the build tree (if there is one) instead of the system.
+         *
+         * Note that this does *not* actually return the rpath/runpath but the instead the directory the main
+         * executable was found in. This follows the logic that the result is supposed to be used for
+         * executable binaries (i.e. stuff in bindir), not for shared libraries (i.e. stuff in libdir), and
+         * hence the literal shared library path would just be wrong.
+         *
+         * TLDR: if we look for callouts in this dir first, running binaries from the meson build tree
+         * automatically uses the right callout.
+         *
+         * Returns:
+         *     -ENOEXEC         → We are not running in an rpath/runpath $ORIGIN environment
+         *     -ENOENT          → We don't know our own binary path
+         *     -NOTRECOVERABLE  → Dynamic binary information missing?
+         */
+
+        static int runpath_cached = -ERRNO_MAX-1;
+        if (runpath_cached == -ERRNO_MAX-1) {
+                const char *runpath = NULL;
+
+                runpath_cached = get_runpath(&runpath);
+
+                /* We only care if the runpath starts with $ORIGIN/ */
+                if (runpath_cached > 0 && !startswith(runpath, "$ORIGIN/"))
+                        runpath_cached = 0;
+        }
+        if (runpath_cached < 0)
+                return runpath_cached;
+        if (runpath_cached == 0)
+                return -ENOEXEC;
+
+        _cleanup_free_ char *exe = NULL;
+        r = get_process_exe(0, &exe);
+        if (r < 0)
+                return runpath_cached = r;
+
+        return path_extract_directory(exe, ret);
+}
+
+static int find_build_dir_binary(const char *fn, char **ret) {
+        int r;
+
+        assert(fn);
+        assert(ret);
+
+        _cleanup_free_ char *build_dir = NULL;
+        r = get_build_exec_dir(&build_dir);
+        if (r < 0)
+                return r;
+
+        _cleanup_free_ char *np = path_join(build_dir, fn);
+        if (!np)
+                return -ENOMEM;
+
+        *ret = TAKE_PTR(np);
+        return 0;
+}
+
+static int find_environment_binary(const char *fn, const char **ret) {
+
+        /* If a path such as /usr/lib/systemd/systemd-foobar is specified, then this will check for an
+         * environment variable SYSTEMD_FOOBAR_PATH and return it if set. */
+
+        _cleanup_free_ char *s = strdup(fn);
+        if (!s)
+                return -ENOMEM;
+
+        ascii_strupper(s);
+        string_replace_char(s, '-', '_');
+
+        if (!strextend(&s, "_PATH"))
+                return -ENOMEM;
+
+        const char *e;
+        e = secure_getenv(s);
+        if (!e)
+                return -ENXIO;
+
+        *ret = e;
+        return 0;
+}
+
+int invoke_callout_binary(const char *path, char *const argv[]) {
+        int r;
+
+        assert(path);
+
+        /* Just like execv(), but tries to execute the specified binary in the build dir instead, if known */
+
+        _cleanup_free_ char *fn = NULL;
+        r = path_extract_filename(path, &fn);
+        if (r < 0)
+                return r;
+        if (r == O_DIRECTORY) /* Uh? */
+                return -EISDIR;
+
+        const char *e;
+        if (find_environment_binary(fn, &e) >= 0) {
+                /* If there's an explicit environment variable set for this binary, prefer it */
+                execv(e, argv);
+                return -errno; /* The environment variable counts, let's fail otherwise */
+        }
+
+        _cleanup_free_ char *np = NULL;
+        if (find_build_dir_binary(fn, &np) >= 0)
+                execv(np, argv);
+
+        execv(path, argv);
+        return -errno;
+}
+
+int pin_callout_binary(const char *path) {
+        int r;
+
+        assert(path);
+
+        /* Similar to invoke_callout_binary(), but pins (i.e. O_PATH opens) the binary instead of executing it. */
+
+        _cleanup_free_ char *fn = NULL;
+        r = path_extract_filename(path, &fn);
+        if (r < 0)
+                return r;
+        if (r == O_DIRECTORY) /* Uh? */
+                return -EISDIR;
+
+        const char *e;
+        if (find_environment_binary(fn, &e) >= 0)
+                return RET_NERRNO(open(e, O_CLOEXEC|O_PATH));
+
+        _cleanup_free_ char *np = NULL;
+        if (find_build_dir_binary(fn, &np) >= 0) {
+                r = RET_NERRNO(open(np, O_CLOEXEC|O_PATH));
+                if (r >= 0)
+                        return r;
+        }
+
+        return RET_NERRNO(open(path, O_CLOEXEC|O_PATH));
+}