Adding upstream version 256.upstream/256

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 620 insertions, 0 deletions

diff --git a/test/units/TEST-46-HOMED.sh b/test/units/TEST-46-HOMED.sh
new file mode 100755
index 0000000..61590a1
--- /dev/null
+++ b/test/units/TEST-46-HOMED.sh
@@ -0,0 +1,620 @@
+#!/usr/bin/env bash
+# SPDX-License-Identifier: LGPL-2.1-or-later
+set -eux
+set -o pipefail
+
+# Check if homectl is installed, and if it isn't bail out early instead of failing
+if ! test -x /usr/bin/homectl ; then
+        echo "no homed" >/skipped
+        exit 77
+fi
+
+inspect() {
+    # As updating disk-size-related attributes can take some time on some
+    # filesystems, let's drop these fields before comparing the outputs to
+    # avoid unexpected fails. To see the full outputs of both homectl &
+    # userdbctl (for debugging purposes) drop the fields just before the
+    # comparison.
+    local USERNAME="${1:?}"
+    homectl inspect "$USERNAME" | tee /tmp/a
+    userdbctl user "$USERNAME" | tee /tmp/b
+
+    # diff uses the grep BREs for pattern matching
+    diff -I '^\s*Disk \(Size\|Free\|Floor\|Ceiling\|Usage\):' /tmp/{a,b}
+    rm /tmp/{a,b}
+
+    homectl inspect --json=pretty "$USERNAME"
+}
+
+wait_for_state() {
+    for i in {1..10}; do
+        (( i > 1 )) && sleep 0.5
+        homectl inspect "$1" | grep -qF "State: $2" && break
+    done
+}
+
+FSTYPE="$(stat --file-system --format "%T" /)"
+
+systemctl start systemd-homed.service systemd-userdbd.socket
+
+systemd-analyze log-level debug
+systemctl service-log-level systemd-homed debug
+
+# Create a tmpfs to use as backing store for the home dir. That way we can enforce a size limit nicely.
+mkdir -p /home
+mount -t tmpfs tmpfs /home -o size=290M
+
+TMP_SKEL=$(mktemp -d)
+echo hogehoge >"$TMP_SKEL"/hoge
+
+# we enable --luks-discard= since we run our tests in a tight VM, hence don't
+# needlessly pressure for storage. We also set the cheapest KDF, since we don't
+# want to waste CI CPU cycles on it. We also effectively disable rate-limiting on
+# the user by allowing 1000 logins per second
+NEWPASSWORD=xEhErW0ndafV4s homectl create test-user \
+           --disk-size=min \
+           --luks-discard=yes \
+           --image-path=/home/test-user.home \
+           --luks-pbkdf-type=pbkdf2 \
+           --luks-pbkdf-time-cost=1ms \
+           --rate-limit-interval=1s \
+           --rate-limit-burst=1000 \
+           --skel="$TMP_SKEL"
+inspect test-user
+
+PASSWORD=xEhErW0ndafV4s homectl authenticate test-user
+
+PASSWORD=xEhErW0ndafV4s homectl activate test-user
+inspect test-user
+
+PASSWORD=xEhErW0ndafV4s homectl update test-user --real-name="Inline test"
+inspect test-user
+
+homectl deactivate test-user
+inspect test-user
+
+PASSWORD=xEhErW0ndafV4s NEWPASSWORD=yPN4N0fYNKUkOq homectl passwd test-user
+inspect test-user
+
+PASSWORD=yPN4N0fYNKUkOq homectl activate test-user
+inspect test-user
+
+SYSTEMD_LOG_LEVEL=debug PASSWORD=yPN4N0fYNKUkOq NEWPASSWORD=xEhErW0ndafV4s homectl passwd test-user
+inspect test-user
+
+homectl deactivate test-user
+inspect test-user
+
+homectl update test-user --real-name "Offline test" --offline
+inspect test-user
+
+PASSWORD=xEhErW0ndafV4s homectl activate test-user
+inspect test-user
+
+# Ensure that the offline changes were propagated in
+grep "Offline test" /home/test-user/.identity
+
+homectl deactivate test-user
+inspect test-user
+
+PASSWORD=xEhErW0ndafV4s homectl update test-user --real-name="Inactive test"
+inspect test-user
+
+PASSWORD=xEhErW0ndafV4s homectl activate test-user
+inspect test-user
+
+homectl deactivate test-user
+inspect test-user
+
+# Do some keyring tests, but only on real kernels, since keyring access inside of containers will fail
+# (See: https://github.com/systemd/systemd/issues/17606)
+if ! systemd-detect-virt -cq ; then
+        PASSWORD=xEhErW0ndafV4s homectl activate test-user
+        inspect test-user
+
+        # Key should now be in the keyring
+        homectl update test-user --real-name "Keyring Test"
+        inspect test-user
+
+        # These commands shouldn't use the keyring
+        (! timeout 5s homectl authenticate test-user )
+        (! NEWPASSWORD="foobar" timeout 5s homectl passwd test-user )
+
+        homectl lock test-user
+        inspect test-user
+
+        # Key should be gone from keyring
+        (! timeout 5s homectl update test-user --real-name "Keyring Test 2" )
+
+        PASSWORD=xEhErW0ndafV4s homectl unlock test-user
+        inspect test-user
+
+        # Key should have been re-instantiated into the keyring
+        homectl update test-user --real-name "Keyring Test 3"
+        inspect test-user
+
+        homectl deactivate test-user
+        inspect test-user
+fi
+
+# Do some resize tests, but only if we run on real kernels and are on btrfs, as quota inside of containers
+# will fail and minimizing while active only works on btrfs.
+if ! systemd-detect-virt -cq && [[ "$FSTYPE" == "btrfs" ]]; then
+    # grow while inactive
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user 300M
+    inspect test-user
+
+    # minimize while inactive
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user min
+    inspect test-user
+
+    PASSWORD=xEhErW0ndafV4s homectl activate test-user
+    inspect test-user
+
+    # grow while active
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user max
+    inspect test-user
+
+    # minimize while active
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user 0
+    inspect test-user
+
+    # grow while active
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user 300M
+    inspect test-user
+
+    # shrink to original size while active
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user 256M
+    inspect test-user
+
+    # minimize again
+    PASSWORD=xEhErW0ndafV4s homectl resize test-user min
+    inspect test-user
+
+    # Increase space, so that we can reasonably rebalance free space between to home dirs
+    mount /home -o remount,size=800M
+
+    # create second user
+    NEWPASSWORD=uuXoo8ei homectl create test-user2 \
+           --disk-size=min \
+           --luks-discard=yes \
+           --image-path=/home/test-user2.home \
+           --luks-pbkdf-type=pbkdf2 \
+           --luks-pbkdf-time-cost=1ms \
+           --rate-limit-interval=1s \
+           --rate-limit-burst=1000
+    inspect test-user2
+
+    # activate second user
+    PASSWORD=uuXoo8ei homectl activate test-user2
+    inspect test-user2
+
+    # set second user's rebalance weight to 100
+    PASSWORD=uuXoo8ei homectl update test-user2 --rebalance-weight=100
+    inspect test-user2
+
+    # set first user's rebalance weight to quarter of that of the second
+    PASSWORD=xEhErW0ndafV4s homectl update test-user --rebalance-weight=25
+    inspect test-user
+
+    # synchronously rebalance
+    homectl rebalance
+    inspect test-user
+    inspect test-user2
+
+    wait_for_state test-user2 active
+    homectl deactivate test-user2
+    wait_for_state test-user2 inactive
+    homectl remove test-user2
+fi
+
+PASSWORD=xEhErW0ndafV4s homectl with test-user -- test ! -f /home/test-user/xyz
+(! PASSWORD=xEhErW0ndafV4s homectl with test-user -- test -f /home/test-user/xyz)
+PASSWORD=xEhErW0ndafV4s homectl with test-user -- touch /home/test-user/xyz
+PASSWORD=xEhErW0ndafV4s homectl with test-user -- test -f /home/test-user/xyz
+PASSWORD=xEhErW0ndafV4s homectl with test-user -- rm /home/test-user/xyz
+PASSWORD=xEhErW0ndafV4s homectl with test-user -- test ! -f /home/test-user/xyz
+(! PASSWORD=xEhErW0ndafV4s homectl with test-user -- test -f /home/test-user/xyz)
+[[ $(PASSWORD=xEhErW0ndafV4s homectl with test-user -- stat -c %U /home/test-user/hoge) == "test-user" ]]
+[[ $(PASSWORD=xEhErW0ndafV4s homectl with test-user -- cat /home/test-user/hoge) == "$(cat "$TMP_SKEL"/hoge)" ]]
+
+# Regression tests
+wait_for_state test-user inactive
+/usr/lib/systemd/tests/unit-tests/manual/test-homed-regression-31896 test-user
+
+wait_for_state test-user inactive
+homectl remove test-user
+
+# blob directory tests
+# See docs/USER_RECORD_BLOB_DIRS.md
+checkblob() {
+        test -f "/var/cache/systemd/home/blob-user/$1"
+        stat -c "%u %#a" "/var/cache/systemd/home/blob-user/$1" | grep "^0 0644"
+        test -f "/home/blob-user/.identity-blob/$1"
+        stat -c "%u %#a" "/home/blob-user/.identity-blob/$1" | grep "^12345 0644"
+
+        diff "/var/cache/systemd/home/blob-user/$1" "$2"
+        diff "/var/cache/systemd/home/blob-user/$1" "/home/blob-user/.identity-blob/$1"
+}
+
+mkdir /tmp/blob1 /tmp/blob2
+echo data1 blob1 >/tmp/blob1/test1
+echo data1 blob2 >/tmp/blob2/test1
+echo data2 blob1 >/tmp/blob1/test2
+echo data2 blob2 >/tmp/blob2/test2
+echo invalid filename >/tmp/blob1/файл
+echo data3 >/tmp/external-test3
+echo avatardata >/tmp/external-avatar
+ln -s /tmp/external-avatar /tmp/external-avatar-lnk
+dd if=/dev/urandom of=/tmp/external-barely-fits bs=1M count=64
+dd if=/dev/urandom of=/tmp/external-toobig bs=1M count=65
+
+# create w/ prepopulated blob dir
+NEWPASSWORD=EMJuc3zQaMibJo homectl create blob-user \
+           --disk-size=min --luks-discard=yes \
+           --luks-pbkdf-type=pbkdf2 --luks-pbkdf-time-cost=1ms \
+           --rate-limit-interval=1s --rate-limit-burst=1000 \
+           --uid=12345 \
+           --blob=/tmp/blob1
+inspect blob-user
+PASSWORD=EMJuc3zQaMibJo homectl activate blob-user
+inspect blob-user
+
+test -d /var/cache/systemd/home/blob-user
+stat -c "%u %#a" /var/cache/systemd/home/blob-user | grep "^0 0755"
+test -d /home/blob-user/.identity-blob
+stat -c "%u %#a" /home/blob-user/.identity-blob | grep "^12345 0700"
+
+checkblob test1 /tmp/blob1/test1
+(! checkblob test1 /tmp/blob2/test1 )
+checkblob test2 /tmp/blob1/test2
+(! checkblob test2 /tmp/blob2/test2 )
+(! checkblob фаил /tmp/blob1/фаил )
+(! checkblob test3 /tmp/external-test3 )
+(! checkblob avatar /tmp/external-avatar )
+
+# append files to existing blob, both well-known and other
+PASSWORD=EMJuc3zQaMibJo homectl update blob-user \
+        -b test3=/tmp/external-test3 --avatar=/tmp/external-avatar
+inspect blob-user
+checkblob test1 /tmp/blob1/test1
+(! checkblob test1 /tmp/blob2/test1 )
+checkblob test2 /tmp/blob1/test2
+(! checkblob test2 /tmp/blob2/test2 )
+(! checkblob фаил /tmp/blob1/фаил )
+checkblob test3 /tmp/external-test3
+checkblob avatar /tmp/external-avatar
+
+# delete files from existing blob, both well-known and other
+PASSWORD=EMJuc3zQaMibJo homectl update blob-user \
+        -b test3= --avatar=
+inspect blob-user
+checkblob test1 /tmp/blob1/test1
+(! checkblob test1 /tmp/blob2/test1 )
+checkblob test2 /tmp/blob1/test2
+(! checkblob test2 /tmp/blob2/test2 )
+(! checkblob фаил /tmp/blob1/фаил )
+(! checkblob test3 /tmp/external-test3 )
+(! checkblob avatar /tmp/external-avatar )
+
+# swap entire blob directory
+PASSWORD=EMJuc3zQaMibJo homectl update blob-user \
+        -b /tmp/blob2
+inspect blob-user
+(! checkblob test1 /tmp/blob1/test1 )
+checkblob test1 /tmp/blob2/test1
+(! checkblob test2 /tmp/blob1/test2 )
+checkblob test2 /tmp/blob2/test2
+(! checkblob фаил /tmp/blob1/фаил )
+(! checkblob test3 /tmp/external-test3 )
+(! checkblob avatar /tmp/external-avatar )
+
+# create and delete files while swapping blob directory. Also symlinks.
+PASSWORD=EMJuc3zQaMibJo homectl update blob-user \
+        -b /tmp/blob1 -b test2= -b test3=/tmp/external-test3 --avatar=/tmp/external-avatar-lnk
+inspect blob-user
+checkblob test1 /tmp/blob1/test1
+(! checkblob test1 /tmp/blob2/test1 )
+(! checkblob test2 /tmp/blob1/test2 )
+(! checkblob test2 /tmp/blob2/test2 )
+(! checkblob фаил /tmp/blob1/фаил )
+checkblob test3 /tmp/external-test3
+checkblob avatar /tmp/external-avatar # target of the link
+
+# clear the blob directory
+PASSWORD=EMJuc3zQaMibJo homectl update blob-user \
+        -b /tmp/blob2 -b test3=/tmp/external-test3 --blob=
+inspect blob-user
+(! checkblob test1 /tmp/blob1/test1 )
+(! checkblob test1 /tmp/blob2/test1 )
+(! checkblob test2 /tmp/blob1/test2 )
+(! checkblob test2 /tmp/blob2/test2 )
+(! checkblob фаил /tmp/blob1/фаил )
+(! checkblob test3 /tmp/external-test3 )
+(! checkblob avatar /tmp/external-avatar )
+
+# file that's exactly 64M still fits
+# FIXME: Figure out why this fails on ext4.
+if [[ "$FSTYPE" != "ext2/ext3" ]]; then
+    PASSWORD=EMJuc3zQaMibJo homectl update blob-user \
+            -b barely-fits=/tmp/external-barely-fits
+    (! checkblob test1 /tmp/blob1/test1 )
+    (! checkblob test1 /tmp/blob2/test1 )
+    (! checkblob test2 /tmp/blob1/test2 )
+    (! checkblob test2 /tmp/blob2/test2 )
+    (! checkblob фаил /tmp/blob1/фаил )
+    (! checkblob test3 /tmp/external-test3 )
+    (! checkblob avatar /tmp/external-avatar )
+    checkblob barely-fits /tmp/external-barely-fits
+fi
+
+# error out if the file is too big
+(! PASSWORD=EMJuc3zQaMibJo homectl update blob-user -b huge=/tmp/external-toobig )
+
+# error out if filenames are invalid
+(! PASSWORD=EMJuc3zQaMibJo homectl update blob-user -b .hidden=/tmp/external-test3 )
+(! PASSWORD=EMJuc3zQaMibJo homectl update blob-user -b "with spaces=/tmp/external-test3" )
+(! PASSWORD=EMJuc3zQaMibJo homectl update blob-user -b with=equals=/tmp/external-test3 )
+(! PASSWORD=EMJuc3zQaMibJo homectl update blob-user -b файл=/tmp/external-test3 )
+(! PASSWORD=EMJuc3zQaMibJo homectl update blob-user -b special@chars=/tmp/external-test3 )
+
+# Make sure offline updates to blobs get propagated in
+homectl deactivate blob-user
+inspect blob-user
+homectl update blob-user --offline -b barely-fits= -b propagated=/tmp/external-test3
+inspect blob-user
+PASSWORD=EMJuc3zQaMibJo homectl activate blob-user
+inspect blob-user
+(! checkblob barely-fits /tmp/external-barely-fits )
+checkblob propagated /tmp/external-test3
+
+homectl deactivate blob-user
+wait_for_state blob-user inactive
+homectl remove blob-user
+
+# userdbctl tests
+export PAGER=
+
+# Create a couple of user/group records to test io.systemd.DropIn
+# See docs/USER_RECORD.md and docs/GROUP_RECORD.md
+mkdir -p /run/userdb/
+cat >"/run/userdb/dropingroup.group" <<\EOF
+{
+    "groupName" : "dropingroup",
+    "gid"       : 1000000
+}
+EOF
+cat >"/run/userdb/dropinuser.user" <<\EOF
+{
+    "userName" : "dropinuser",
+    "uid"      : 2000000,
+    "realName" : "🐱",
+    "memberOf" : [
+        "dropingroup"
+    ]
+}
+EOF
+cat >"/run/userdb/dropinuser.user-privileged" <<\EOF
+{
+    "privileged" : {
+        "hashedPassword" : [
+            "$6$WHBKvAFFT9jKPA4k$OPY4D4TczKN/jOnJzy54DDuOOagCcvxxybrwMbe1SVdm.Bbr.zOmBdATp.QrwZmvqyr8/SafbbQu.QZ2rRvDs/"
+        ],
+        "sshAuthorizedKeys" : [
+            "ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAIA//dxI2xLg4MgxIKKZv1nqwTEIlE/fdakii2Fb75pG+ foo@bar.tld",
+            "ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBMlaqG2rTMje5CQnfjXJKmoSpEVJ2gWtx4jBvsQbmee2XbU/Qdq5+SRisssR9zVuxgg5NA5fv08MgjwJQMm+csc= hello@world.tld"
+        ]
+    }
+}
+EOF
+# Set permissions and create necessary symlinks as described in nss-systemd(8)
+chmod 0600 "/run/userdb/dropinuser.user-privileged"
+ln -svrf "/run/userdb/dropingroup.group" "/run/userdb/1000000.group"
+ln -svrf "/run/userdb/dropinuser.user" "/run/userdb/2000000.user"
+ln -svrf "/run/userdb/dropinuser.user-privileged" "/run/userdb/2000000.user-privileged"
+
+userdbctl
+userdbctl --version
+userdbctl --help --no-pager
+userdbctl --no-legend
+userdbctl --output=classic
+userdbctl --output=friendly
+userdbctl --output=table
+userdbctl --output=json | jq
+userdbctl -j --json=pretty | jq
+userdbctl -j --json=short | jq
+userdbctl --with-varlink=no
+
+userdbctl user
+userdbctl user testuser
+userdbctl user root
+userdbctl user testuser root
+userdbctl user -j testuser root | jq
+# Check only UID for the nobody user, since the name is build-configurable
+userdbctl user --with-nss=no --synthesize=yes
+userdbctl user --with-nss=no --synthesize=yes 0 root 65534
+userdbctl user dropinuser
+userdbctl user 2000000
+userdbctl user --with-nss=no --with-varlink=no --synthesize=no --multiplexer=no dropinuser
+userdbctl user --with-nss=no 2000000
+(! userdbctl user '')
+(! userdbctl user 🐱)
+(! userdbctl user 🐱 '' bar)
+(! userdbctl user i-do-not-exist)
+(! userdbctl user root i-do-not-exist testuser)
+(! userdbctl user --with-nss=no --synthesize=no 0 root 65534)
+(! userdbctl user -N root nobody)
+(! userdbctl user --with-dropin=no dropinuser)
+(! userdbctl user --with-dropin=no 2000000)
+
+userdbctl group
+userdbctl group testuser
+userdbctl group root
+userdbctl group testuser root
+userdbctl group -j testuser root | jq
+# Check only GID for the nobody group, since the name is build-configurable
+userdbctl group --with-nss=no --synthesize=yes
+userdbctl group --with-nss=no --synthesize=yes 0 root 65534
+userdbctl group dropingroup
+userdbctl group 1000000
+userdbctl group --with-nss=no --with-varlink=no --synthesize=no --multiplexer=no dropingroup
+userdbctl group --with-nss=no 1000000
+(! userdbctl group '')
+(! userdbctl group 🐱)
+(! userdbctl group 🐱 '' bar)
+(! userdbctl group i-do-not-exist)
+(! userdbctl group root i-do-not-exist testuser)
+(! userdbctl group --with-nss=no --synthesize=no 0 root 65534)
+(! userdbctl group --with-dropin=no dropingroup)
+(! userdbctl group --with-dropin=no 1000000)
+
+userdbctl users-in-group
+userdbctl users-in-group testuser
+userdbctl users-in-group testuser root
+userdbctl users-in-group -j testuser root | jq
+userdbctl users-in-group 🐱
+(! userdbctl users-in-group '')
+(! userdbctl users-in-group foo '' bar)
+
+userdbctl groups-of-user
+userdbctl groups-of-user testuser
+userdbctl groups-of-user testuser root
+userdbctl groups-of-user -j testuser root | jq
+userdbctl groups-of-user 🐱
+(! userdbctl groups-of-user '')
+(! userdbctl groups-of-user foo '' bar)
+
+userdbctl services
+userdbctl services -j | jq
+
+varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"userName":"testuser","service":"io.systemd.Multiplexer"}'
+varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"userName":"root","service":"io.systemd.Multiplexer"}'
+varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"userName":"dropinuser","service":"io.systemd.Multiplexer"}'
+varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"uid":2000000,"service":"io.systemd.Multiplexer"}'
+(! varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"userName":"","service":"io.systemd.Multiplexer"}')
+(! varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"userName":"🐱","service":"io.systemd.Multiplexer"}')
+(! varlinkctl call /run/systemd/userdb/io.systemd.Multiplexer io.systemd.UserDatabase.GetUserRecord '{"userName":"i-do-not-exist","service":"io.systemd.Multiplexer"}')
+
+userdbctl ssh-authorized-keys dropinuser | tee /tmp/authorized-keys
+grep "ssh-ed25519" /tmp/authorized-keys
+grep "ecdsa-sha2-nistp256" /tmp/authorized-keys
+echo "my-top-secret-key 🐱" >/tmp/my-top-secret-key
+userdbctl ssh-authorized-keys dropinuser --chain /bin/cat /tmp/my-top-secret-key | tee /tmp/authorized-keys
+grep "ssh-ed25519" /tmp/authorized-keys
+grep "ecdsa-sha2-nistp256" /tmp/authorized-keys
+grep "my-top-secret-key 🐱" /tmp/authorized-keys
+(! userdbctl ssh-authorized-keys 🐱)
+(! userdbctl ssh-authorized-keys dropin-user --chain)
+(! userdbctl ssh-authorized-keys dropin-user --chain '')
+(! SYSTEMD_LOG_LEVEL=debug userdbctl ssh-authorized-keys dropin-user --chain /bin/false)
+
+(! userdbctl '')
+for opt in json multiplexer output synthesize with-dropin with-nss with-varlink; do
+    (! userdbctl "--$opt=''")
+    (! userdbctl "--$opt='🐱'")
+    (! userdbctl "--$opt=foo")
+    (! userdbctl "--$opt=foo" "--$opt=''" "--$opt=🐱")
+done
+
+# FIXME: sshd seems to crash inside asan currently, skip the actual ssh test hence
+if command -v ssh &>/dev/null && command -v sshd &>/dev/null && ! [[ -v ASAN_OPTIONS ]]; then
+    at_exit() {
+        set +e
+
+        systemctl is-active -q mysshserver.socket && systemctl stop mysshserver.socket
+        rm -f /tmp/homed.id_ecdsa /run/systemd/system/mysshserver{@.service,.socket}
+        systemctl daemon-reload
+        homectl remove homedsshtest
+        for dir in /etc /usr/lib; do
+            if [[ -f "$dir/pam.d/sshd.bak" ]]; then
+                mv "$dir/pam.d/sshd.bak" "$dir/pam.d/sshd"
+            fi
+        done
+    }
+
+    trap at_exit EXIT
+
+    # Test that SSH logins work with delayed unlocking
+    ssh-keygen -N '' -C '' -t ecdsa -f /tmp/homed.id_ecdsa
+    NEWPASSWORD=hunter4711 homectl create \
+                       --disk-size=min \
+                       --luks-discard=yes \
+                       --luks-pbkdf-type=pbkdf2 \
+                       --luks-pbkdf-time-cost=1ms \
+                       --rate-limit-interval=1s \
+                       --rate-limit-burst=1000 \
+                       --enforce-password-policy=no \
+                       --ssh-authorized-keys=@/tmp/homed.id_ecdsa.pub \
+                       --stop-delay=0 \
+                       homedsshtest
+    homectl inspect homedsshtest
+
+    mkdir -p /etc/ssh
+    test -f /etc/ssh/ssh_host_ecdsa_key || ssh-keygen -t ecdsa -C '' -N '' -f /etc/ssh/ssh_host_ecdsa_key
+
+    # ssh wants this dir around, but distros cannot agree on a common name for it, let's just create all that
+    # are aware of distros use
+    mkdir -p /usr/share/empty.sshd /var/empty /var/empty/sshd /run/sshd
+
+    for dir in /etc /usr/lib; do
+        if [[ -f "$dir/pam.d/sshd" ]]; then
+            mv "$dir/pam.d/sshd" "$dir/pam.d/sshd.bak"
+            cat >"$dir/pam.d/sshd" <<EOF
+auth    sufficient pam_unix.so nullok
+auth    sufficient pam_systemd_home.so debug
+auth    required   pam_deny.so
+account sufficient pam_systemd_home.so debug
+account sufficient pam_unix.so
+account required   pam_permit.so
+session optional   pam_systemd_home.so debug
+session optional   pam_systemd.so
+session required   pam_unix.so
+EOF
+            break
+        fi
+    done
+
+    mkdir -p /etc/sshd/
+    cat >/etc/ssh/sshd_config <<EOF
+AuthorizedKeysCommand /usr/bin/userdbctl ssh-authorized-keys %u
+AuthorizedKeysCommandUser root
+UsePAM yes
+AcceptEnv PASSWORD
+LogLevel DEBUG3
+EOF
+
+    cat >/run/systemd/system/mysshserver.socket <<EOF
+[Socket]
+ListenStream=4711
+Accept=yes
+EOF
+
+    cat >/run/systemd/system/mysshserver@.service <<EOF
+[Service]
+ExecStart=-/usr/sbin/sshd -i -d -e
+StandardInput=socket
+StandardOutput=socket
+StandardError=journal
+EOF
+
+    systemctl daemon-reload
+    systemctl start mysshserver.socket
+
+    userdbctl user -j homedsshtest
+
+    ssh -t -t -4 -p 4711 -i /tmp/homed.id_ecdsa \
+        -o "SetEnv PASSWORD=hunter4711" -o "StrictHostKeyChecking no" \
+        homedsshtest@localhost echo zzz | tr -d '\r' | tee /tmp/homedsshtest.out
+    grep -E "^zzz$" /tmp/homedsshtest.out
+    rm /tmp/homedsshtest.out
+
+    ssh -t -t -4 -p 4711 -i /tmp/homed.id_ecdsa \
+        -o "SetEnv PASSWORD=hunter4711" -o "StrictHostKeyChecking no" \
+        homedsshtest@localhost env
+
+    wait_for_state homedsshtest inactive
+fi
+
+systemd-analyze log-level info
+
+touch /testok